Search

The characterization of ground targets from a remotely sensed Synthetic Aperture Radar (SAR) image is addressed by polarimetric decomposition. The polarimetric SAR (PolSAR) decomposition measures the contribution of total backscatter from different scattering mechanisms using SAR images. The ambiguities present in the retrieval of scattering are the major problems associated with the model-based decomposition which could be reduced with a combination of interferometric coherence and PolSAR backscatter. The objective of this study is to improve the polarimetric decomposition model for identifying the scattering mechanisms based on the Polarimetric SAR Interferometry (PolInSAR) coherence for natural and manmade features. In this paper, we have proposed a model-based polarimetric decomposition using PolInSAR decorrelation. The PolInSAR decorrelation is exploited here to distinguish the time-varying and invariant scatterers present in the ground. The volume scattering power was calculated using the proposed decorrelation parameter which is the combination of PolInSAR coherence and decorrelation. The proposed algorithm has been tested on spaceborne multifrequency SAR datasets consisting of X-band TerraSAR-X and TerraSAR-X add-on for Digital Elevation Measurement (TanDEM-X), C-band Radarsat-2, and phased array L-band synthetic aperture radar-2 (PALSAR-2) data of advanced land observing satellite-2 (ALOS-2) PolInSAR data for the Dehradun region, India. The results show that there is a remarkable reduction in the ambiguities present in the identification of the scattering mechanism from the SAR image by using the proposed decorrelation-based decomposition model. Moreover, the algorithm is tested on X-band TerraSAR-X and TanDEM-X data of the Haridwar area and Rudrapur area, Uttarakhand, India to analyse the potential of the proposed decomposition technique in representing different manmade and natural features. [ABSTRACT FROM AUTHOR]

Spaceborne and airborne polarimetric synthetic-aperture radar interferometry (PolInSAR) data have been extensively used for forest parameter retrieval. The PolInSAR models have proven their potential in the accurate measurement of forest vegetation height. Spaceborne monostatic multifrequency data of different SAR missions and the Global Ecosystem Dynamics Investigation (GEDI)-derived forest canopy height map were used in this study for vegetation height retrieval. This study tested the performance of PolInSAR complex coherence-based inversion models for estimating the vegetation height of the forest ranges of Doon Valley, Uttarakhand, India. The inversion-based forest height obtained from the three-stage inversion (TSI) model had higher accuracy than the coherence amplitude inversion (CAI) model-based estimates. The vegetation height values of GEDI-derived canopy height map did not show good relation with field-measured forest height values. It was found that, at several locations, GEDI-derived forest height values underestimated the vegetation height. The statistical analysis of the GEDI-derived estimates with field-measured height showed a high root mean square error (RMSE; 5.82 m) and standard error (SE; 5.33 m) with a very low coefficient of determination (R2; 0.0022). An analysis of the spaceborne-mission-based forest height values suggested that the L-band SAR has great potential in forest height retrieval. TSI-model-based forest height values showed lower p-values, which indicates the significant relation between modelled and field-measured forest height values. A comparison of the results obtained from different SAR systems is discussed, and it is observed that the L-band-based PolInSAR inversion gives the most reliable result with low RMSE (2.87 m) and relatively higher R2 (0.53) for the linear regression analysis between the modelled tree height and the field data. These results indicate that higher wavelength PolInSAR datasets are more suitable for tree canopy height estimation using the PolInSAR inversion technique. [ABSTRACT FROM AUTHOR]