Search

The improvement of photovoltaic and stability performance of tin (Sn)‐based halide perovskite solar cells is impeded by notorious oxidation issues and Anderson localization. Despite previous implements in antioxidation through the incorporation of Lewis base additives, there still exist ongoing uncertainties surrounding its complex interaction mechanisms. A perplexing phenomenon regarding accelerated oxidation in acrylic acid is discovered that deviates from conventional Lewis base–acid reaction. The underlying insights into the deprotonation of acrylic acid followed by the formation of a "tripod" ionic bonding form are provided, which results in amplifying the delocalization effect of electrons of Sn2+. Furthermore, with the assistance of acrylamide and acrolein, synergistic enhancement in terms of the antioxidation and suppression of Anderson localization can be achieved — a concept referred to as "Dual Synergistic Engineering". This suppresses the oxidation of Sn2+ and reduces Sn4+ content by ≈76%. Meanwhile, the diffusion length is prolonged significantly from 195.9 to 458.9 nm. The optimized all‐inorganic Sn/Pb‐based perovskite solar cells exhibit a power conversion efficiency of above 14% with enhanced stability. These findings provide an alternative viewpoint for comprehending the impact of chemical interaction on oxidation and crystal growth in Sn/Pb‐based perovskites. [ABSTRACT FROM AUTHOR]

In situ cyclized polyacrylonitrile (CPAN) is developed to replace n‐type metal oxide semiconductors (TiO2 or SnO2) as an electron selective layer (ESL) for highly efficient and stable n‐i‐p perovskite solar cells (PSCs). The CPAN layer is fabricated via facile in situ cyclization reaction of polyacrylonitrile (PAN) coated on a conducting glass substrate. The CPAN layer is robust and insoluble in common solvents, and possesses n‐type semiconductor properties with a high electron mobility of 4.13×10−3 cm2 V−1 s−1. With the CPAN as an ESL, the PSC affords a power conversion efficiency (PCE) of 23.12 %, which is the highest for the n‐i‐p PSCs with organic ESLs. Moreover, the device with the CPAN layer holds superior operational stability, maintaining over 90 % of their initial efficiency after 500 h continuous light soaking. These results confirm that the CPAN layer would be a desirable low‐cost and efficient ESL for n‐i‐p PSCs and other photoelectronic devices with high performance and stability. [ABSTRACT FROM AUTHOR]

Electrochromic devices (ECDs) have attracted substantial attention on account of their unique characteristics and prosperous applications. However, their monotonous color modification remains a momentous challenge that significantly restricts their application scope. Integrating structural colors that arise from the interaction between light and periodic micro/nanostructures with electrochromic materials (ECMs) turns out to be an effective approach to enhancing the comprehensive performance of ECDs more than the coloration effectiveness. This review provides an overview on the recent burgeoning development of structural color ECDs regarding strategies and applications. The performance parameters of ECDs and physical principles regarding the generation of structural colors are introduced. Then, strategies that introduce structural colors into ECDs are discussed according to the category of chromogenic micro/nanostructures, namely, gratings, (single‐layer and multilayer) thin films, photonic crystals, plasmonic metasurfaces, and composite structures. The current state‐of‐the‐art research activities of structural color ECDs for display application including segmented and pixelated devices are also presented. Additionally, the future perspective of structural color ECDs with respect of major challenges and potential solutions is proposed. [ABSTRACT FROM AUTHOR]

For microelectronic devices, the on‐chip microsupercapacitors with facile construction and high performance, are attracting researchers' prior consideration due to their high compatibility with modern microsystems. Herein, we proposed interchanging interdigital Au‐/MnO2/polyethylene dioxythiophene stacked microsupercapacitor based on a microfabrication process followed by successive electrochemical deposition. The stacked configuration of two pseudocapacitive active microelectrodes meritoriously leads to an enhanced contact area between MnO2 and the conductive and electroactive layer of polyethylene dioxythiophene, hence providing excellent electron transport and diffusion pathways of electrolyte ions, resulting in increased pseudocapacitance of MnO2 and polyethylene dioxythiophene. The stacked quasi‐solid‐state microsupercapacitors delivered the maximum specific capacitance of 43 mF cm−2 (211.9 F cm−3), an energy density of 3.8 μWh cm−2 (at a voltage window of 0.8 V) and 5.1 μWh cm−2 (at a voltage window of 1.0 V) with excellent rate capability (96.6% at 2 mA cm−2) and cycling performance of 85.3% retention of initial capacitance after 10 000 consecutive cycles at a current density of 5 mA cm−2, higher than those of ever reported polyethylene dioxythiophene and MnO2‐based planar microsupercapacitors. Benefiting from the favorable morphology, bilayer microsupercapacitor is utilized as a flexible humidity sensor with a response/relaxation time superior to those of some commercially available integrated microsensors. This strategy will be of significance in developing high‐performance on‐chip integrated microsupercapacitors/microsensors at low cost and environment‐friendly routes. [ABSTRACT FROM AUTHOR]

Low‐dimensional (LD) perovskite has provided an exciting avenue for exploring stable perovskite solar cells (PSCs). However, PSCs based on LD perovskites still suffer from poor efficiency owing to unfavorable charge carrier dynamics. Here, cystamine (CYS) is employed as a ligand to construct LD Dion‐Jacobson (LDDJ) perovskite (CYS)MAn‐1PbnI3n+1 (n = 1, 2, 3..., MA: methylamine) for improving carrier properties. The disulfide bond not only changes the polarization characteristic but also increases the coupling between inorganic slabs due to the low barrier of rotation around the S‐S axis, thus reducing the exciton binding energy of CYS‐based LDDJ perovskite. Disulfide bonds provide a scene for charge localization in the interlayer region, which is conducive to reducing the anisotropy of charge transfer. Thanks to these merits, the (CYS)MA4Pb5I16 film delivers improved carrier diffusion length (electron for 1345 nm and hole for 950 nm) and mobility (9.23 cm2 V−1 S−1). As a result, the (CYS)(MA)4Pb5I16 PSC achieves a champion power conversion efficiency (PCE) of 16.52%, which is much higher than that of HDA and BA cations‐based PSCs (HDA: 1,6‐Hexanediamine, BA: Butylamine). Furthermore, the state‐of‐the‐art device only lost 8% of its initial PCE after 1600 h in the atmosphere. [ABSTRACT FROM AUTHOR]

Pluronic F127, P123 and cross-linked F127 diacrylate micelles are photochemically deoxygenating nanocapsules in which oxygen could be removed by photochemical reaction with a surfactant and efficient triplet–triplet annihilation photon upconversion (TTA-UC) can be achieved in air. The efficiency of TTA-UC under air is comparable to that under deoxygenated conditions. [ABSTRACT FROM AUTHOR]