Search

Background: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT)., Methods: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age., Results: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05)., Conclusions: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes., (© 2024. The Author(s).)

Objectives: This systematic review and meta-analysis aimed to evaluate the prevalence of middle mesial canal (MMC) in permanent mandibular molars of different populations and regions based on cone-beam computed tomography (CBCT) studies., Materials and Methods: PubMed, Scopus, Embase, Web of Science, and Open-Grey were searched up to October 2023 according to specific keywords. A hand search was conducted on the references of the included studies and articles from three peer-reviewed journals in endodontics. The main variable of interest was the prevalence of MMC. Additional data such as the total number of included cases, age and country of the population, CBCT device information, voxel size, and field of view details were also extracted. Extracted data were analyzed qualitatively with the JBI quality assessment checklist and quantitatively with STATA software., Results: Of 32,793 studied teeth, the cumulative prevalence of MMC in both mandibular 1 st and 2 nd molars was 3.11% (95% CI: 2.00-4.44%). The subgroup analysis reveals a prevalence of 4.15% (95% CI: 2.69-5.89%) for mandibular 1 st molars and 1.2% (95% CI: 0.2-2.83%) for mandibular 2 nd molars. The highest prevalence of MMC in 1 st molar was attributed to South Asia (11.24%) and Africa (6.61%)., Conclusions: The prevalence of MMC varies among regions. Clinicians should be aware of the potential prevalence of MMC, particularly in mandibular first molars, as a missed MMC could result in endodontic failure., Clinical Relevance: The presence of MMCs varies in different geographic regions (0% to 29.7%). Clinicians should always look for MMC when doing an endodontic treatment on mandibular molars, as the presence of this canal is not uncommon. We suggest searching for this canal as if searching for the second mesiobuccal canal of maxillary 1st molars., (© 2024. Crown.)

This in vitro study compared various obturation techniques with bioceramic sealers for filling C-shaped 3D-printed replicas. A mandibular molar with a C-shaped root canal with a C1 configuration was obtained. After instrumenting with M3 Pro Gold files (United Dental, Shanghai, China) up to size #30/0.04, a CBCT scan of the tooth was taken. Sixty 3D-printed replicas of the tooth were created. The samples were obturated with EndoSeal TCS sealer (E. TCS; Maruchi, Wonju, Korea) or EndoSeal MTA (E. MTA; Maruchi, Wonju, Korea) (n = 30). The samples in each group were obturated with the following techniques (n = 10): (1) single-cone technique (SC), (2) SC with ultrasonic activation (UA), and (3) cold hydraulic compaction (CHC). Following incubation, the replicas' apical, middle, and coronal thirds were inspected under a digital microscope, and the proportion of filling material and void were calculated. Also, the obturation time and sealer extrusion were recorded. Data were analyzed using ANOVA, LSD post-hoc, and the chi-square tests (α = 0.05). The results indicated that in the apical third, E. TCS-SC, E. TCS-UA, and E. MTA-UA had the lowest void percentage among groups (p < 0.05). In the middle thirds, samples obturated with E. TCS-UA showed a significantly lower void percentage among all groups (p < 0.05). However, in the coronal third, E. TCS-CHC showed the least void percentage (p < 0.05), followed by E. TCS-UA and E. MTA-CHC. The E. TCS-SC and E. TCS-UA were the least time-consuming methods (p < 0.05). Sealer extrusion significantly differed among the groups, with E. MTA-UA and E. TCS-UA showing higher incidence (p = 0.019). It was concluded that E. TCS-UA was the most convenient obturation technique. However, care must be taken when obturating the canals with high flow and ultrasonic activation near the vital anatomical landmarks., (© 2024. The Author(s).)

Objective: The two commonly used diagnostic methods for taurodontism are susceptible to aging changes, mastication wear and other factors. Therefore, this study proposed an improved diagnostic method for taurodontism, and compared it with the previous two methods as a supplement for taurodontism diagnosis., Methods: The included patients were aged 10-89 years and admitted to the Department of Stomatology of Hebei Eye Hospital from June 1, 2022 to May 31, 2023. Eighty cone-beam computed tomography images were divided equally into 4 groups: 10-29, 30-49, 50-69, and 70-89 years old. The right mandibular first molars were selected as measurement objects. Firstly, |BD| and taurodontism index (TI)-related parameters were measured using Shifman and Chanannel's method and crown-body(CB) and root (R) lengths was measured by Seow and Lai's method. The improved method used the length from the cementoenamel junction(CEJ) to the root bifurcation point(body, B)and the root length(root, R)as the measurement objects. Finally, TI, CB/R ratios, and B/R ratios were calculated according to the formulas given below. One-way ANOVA analysis was mainly used to compare the differences in the values, indices and ratios of taurodontism among different age groups (p<0.05)., Results: With the increase of age, |BD| and TI values decreased significantly (p<0.01). The CB/R ratios of 70-89 years group were significantly lower than those of the other three groups (p<0.01). Ratios derived from the improved method were significantly lower in the 70-89 years than in 10-29 years group (p<0.05)., Conclusions: The |BD| and TI parameters proposed by Shifman and channel are significantly influenced by age. The measurements of Seow and Lai (CB/R ratios) were less affected by age compared with those of the former. The improved method(B/R ratios) was least affected by age, which would reduce error and bias in the measurement of taurodontism and obtain more objective results in older patients., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Da et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Background: Panoramic radiography (PR) is available to determine the contact relationship between maxillary molar teeth (MMT) and the maxillary sinus floor (MSF). However, as PRs do not provide clear and detailed anatomical information, advanced imaging methods can be used., Aim: The aim of this study was to evaluate the diagnostic performance of deep learning (DL) applications that assess the relationship of the MSF to the first maxillary molar teeth (fMMT) and second maxillary molar teeth (sMMT) on PRs with data confirmed by cone beam computed tomography (CBCT)., Methods: A total of 2162 fMMT and sMMT were included in this retrospective study. The contact relationship of teeth with MSF was compared among DL methods., Results: DL methods, such as GoogLeNet, VGG16, VGG19, DarkNet19, and DarkNet53, were used to evaluate the contact relationship between MMT and MSF, and 85.89% accuracy was achieved by majority voting. In addition, 88.72%, 81.19%, 89.39%, and 83.14% accuracy rates were obtained in right fMMT, right sMMT, left fMMT, and left sMMT, respectively., Conclusion: DL models showed high accuracy values in detecting the relationship of fMMT and sMMT with MSF., (Copyright © 2024 Copyright: © 2024 Nigerian Journal of Clinical Practice.)

Introduction: Pericervical root dentin is decisive for the long-term mechanical integrity of root-filled teeth. Current treatment protocol does not include a customized step to determine the pretreatment residual pericervical root dentin., Objective: To determine and compare the residual root dentin and canal width using digital periapical radiography (DPR) and cone-beam computed tomography (CBCT) at the apical limit of the pericervical area (PCA) in mandibular first molars., Methods: DPR and CBCT images of 60 patients with age between 22 and 76 years were used to determine (a) the mesiodistal widths of the root canal (pericervical dimensions [PCL]-C) and the root (PCL-R) of mandibular first molars at the apical limit of the PCA and (b) the intracanal distance from the apical limit of the PCA to the radiographic apex (intracanal distance [ICD]). The correlation between the PCL and ICD measurements obtained from DPR and CBCT were evaluated., Results: Values between 0.10-0.80 mm and 0.00-1.10 mm were obtained for PCL-C using DPR and CBCT respectively (95% CI). The PCL values between 0.90-2.30 mm and 0.00-2.30 mm were obtained from DPR and CBCT respectively (95% CI). The ICD ranged between 4.6-12.3 mm in DPR and 4.40-12.0 mm in CBCT (95% CI). The comparative analysis showed differences from -0.9 to 0.5 mms for PCL and -2.00 to 1.5 mms for ICD between DPR and CBCT techniques respectively., Conclusion: The PCL and ICD determined from DPR and CBCT provided the pericervical dentin metrics that could be utilized clinically as a guideline for decision-making in endodontic treatment., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: This study assessed the effect of intentional foraminal enlargement on the foramen and the apical root canal morphology., Method: Sixty mesial roots of mandibular molars were scanned by micro-computed tomography. Their apical foramina were photographed with a stereomicroscope before and after preparation. Three groups were formed (n = 20) according to the working length (WL). G-1: foramen - 1 mm; G0: foramen; and G+1: foramen + 1 mm. Each group originated 2 subgroups (n = 10): G-1: Buchanan's patency (size 10 K-type file) and foraminal debridement (sizes 20, 25 and 30 K-type files); G0 and G+1: rotary foraminal enlargement (ProDesign S size 25/.08) or reciprocating foraminal enlargement (R25). The area, perimeter, transportation, and noninstrumented walls of the foramen were evaluated. The root canal transportation and the centering index of preparation at 1, 3 and 5 mm from the foramen were also assessed. Data were compared statistically (α = 5%)., Results: The instruments used at the foramen and 1 mm beyond promoted foraminal enlargement and transportation. Regarding NIW, there was no difference between mechanized foraminal enlargements performed at the foramen or 1 mm beyond, similar to the manual foraminal debridement group (P > .05). There was no difference in transportation and centralization at 1-, 3-, and 5-mm apical levels, regardless of the instrumentation systems., Conclusion: Mechanical preparation at the foramen, or 1 mm beyond, resulted in foraminal enlargement, transportation and were not able to touch all root canal walls that delimit the foramen., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: The purposes of this study were to evaluate the effect of the combined use of object detection for the classification of the C-shaped canal anatomy of the mandibular second molar in panoramic radiographs and to perform an external validation on a multicenter dataset., Methods: The panoramic radiographs of 805 patients were collected from 4 institutes across two countries. The CBCT data of the same patients were used as "Ground-truth". Five datasets were generated: one for training and validation, and 4 as external validation datasets. Workflow 1 used manual cropping to prepare the image patches of mandibular second molars, and then classification was performed using EfficientNet. Workflow 2 used two combined methods with a preceding object detection (YOLOv7) performed for automated image patch formation, followed by classification using EfficientNet. Workflow 3 directly classified the root canal anatomy from the panoramic radiographs using the YOLOv7 prediction outcomes. The classification performance of the 3 workflows was evaluated and compared across 4 external validation datasets., Results: For Workflows 1, 2, and 3, the area under the receiver operating characteristic curve (AUC) values were 0.863, 0.861, and 0.876, respectively, for the AGU dataset; 0.935, 0.945, and 0.863, respectively, for the ASU dataset; 0.854, 0.857, and 0.849, respectively, for the ODU dataset; and 0.821, 0.797, and 0.831, respectively, for the ODU low-resolution dataset. No significant differences existed between the AUC values of Workflows 1, 2, and 3 across the 4 datasets., Conclusions: The deep learning systems of the 3 workflows achieved significant accuracy in predicting the C-shaped canal in mandibular second molars across all test datasets., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: Natural teeth and dental restorations present with various shades and levels of translucency. This study aimed to determine whether these variations in ceramic crowns and scan powder application affect the trueness of intraoral scanners., Methods: Eight identical premade resin typodonts, each prepared for a crown on the maxillary right second molar, were used. Eight lithium disilicate crowns, distinguished by two levels of translucency (high and low) and four shades (BL1, A2, A3, and A4), were fabricated to an identical design and cemented onto each typodont, providing eight distinct experimental groups (2 levels of translucency × 4 shades). Reference scans were acquired using a desktop scanner. Test scans were performed ten times for each experimental group using two different intraoral scanners (Medit i700 and CEREC Primescan AC), with and without the application of scan powder (n = 10). Three-dimensional metrology software was used to assess the trueness of the intraoral scan datasets. Statistical analysis involved the Kruskal-Wallis H test, Mann-Whitney U test, and independent t-test (α=0.05)., Results: For powder-free intraoral scan datasets, the crown shade did not significantly affect trueness within each translucency group (P = 1.000). For both intraoral scanners, compared with low translucency groups, higher marked deviations were exhibited by high translucency groups (P<.001). Scan powder use largely mitigated these differences (P>.05) and enhanced the trueness of the intraoral scan (P<.01)., Conclusions: Shade did not significantly influence the trueness of intraoral scans. High-translucency crowns were scanned with less accuracy than were low-translucency crowns., Clinical Significance: Unlike tooth shade, translucency significantly affected the accuracy of intraoral scans. Therefore, considering the use of scan powder when scanning objects with high translucency may be beneficial., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Different studies have established that the mineralization stages of the second mandibular molar can be used in forensic age estimation. Nowadays, the estimate's accuracy is an ethical concern, producing as few false positives (individuals incorrectly classified as older than a determined threshold) and false negatives (individuals incorrectly classified as younger than a determined threshold) as possible. Some have hypothesized that changes in teeth number may influence tooth mineralization, altering the age estimate process. This paper analyzes whether third molar agenesis affects the second mandibular molar mineralization time frame. To do so, 355 orthopantomograms were evaluated for third molar agenesis, and the second mandibular molar mineralization stage was assessed using the Demirjian stages. Student's t-test was used to compare the difference in the mean age at which the various stages of 37 mineralization were reached in the groups with and without third molar agenesis. The level of statistical significance was set at 5%. The results pointed to a delay in second mandibular molar mineralization in the case of agenesis, suggesting the need to consider this when estimating age using dental techniques., (© 2023. The Author(s).)

As an auxiliary method in the process of human identification, forensic facial approximation (FFA) is an important tool for identifying unknown human bodies whose remains do not present the necessary traceability to any antemortem data collection. Specific characteristics are necessary when addressing children aged between 6 and 10 years, who have little sexual differentiation and a mixed dentition. Due to the chronology of eruption of the permanent second molars in this population, it is not possible to measure facial soft-tissue thickness (FSTT) from specific landmarks such as supra and infra M2. The objective of this research was to report the method for measuring the average FSTT of 32 landmarks adapting the method for adults replacing the landmarks at the upper and lower second molars (Supra M2 and Infra M2) in children up to 10 years of age for a measurement using the deciduous second molars as reference. We found statistical differences for some points, considering the variables of age and sex, but with a maximum difference of 2 mm, which allows the use of a single FSTT table. The deciduous teeth can replace the reference of the thicknesses at the supra and infra M2 landmarks. In addition to the new FSTT data for children in Brazil, we concluded that the proposed adaptation to the deciduous M2 points can be applied to obtain soft-tissue data for 32 facial points., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Statement of Problem: Implant placement in the mandibular molar sites plays a crucial role in the restoration of edentulous mandibles. However, the evaluation of bone quantity before implant surgery using cone beam computed tomography (CBCT) is lacking., Purpose: The purpose of this clinical study was to evaluate CBCT images of edentulous patients to analyze the feasibility of implant placement in healed mandibular molar sites., Material and Methods: The CBCT data of 138 patients were analyzed in the sagittal plane for measurements of mandibular bone height (MBH), superior bone height (SBH), inferior bone height (IBH), buccal bone width (BBW), lingual bone width (LBW), and alveolar bone widths (ABWs). The edentulous sites were categorized according to the bone quantity and complexity of the implant surgery. Multivariate analysis of variance (MANOVA) was used to analyze the site, sex, and age-related variations. An independent t test was used to compare the difference of bone dimension in different sites and between sexes. One-way ANOVA followed by post hoc tests were used to analyze the difference between different age groups. Categorical variables were presented as number of events and percentages. The chi-squared test was used to compare categorical variables (α=.05)., Results: A total of 534 sites of interest were recorded, including 274 hemimandibles. A significant difference in BBW was found between the first and second molar sites. Men had higher MBH, SBH, IBH, and BBW than women. The distribution of implant surgical complexity in the conventional group was 63.5%, while the buccolingual tilted implant group accounted for 17.0%, and the complicated group accounted for 19.5%. Of the 274 hemimandibles, an implant could be placed directly at molar sites in 88% of situations., Conclusions: The BBW at the mandibular second molar site was greater than that at the first molar site. The amount of available bone in the SBH and BBW was greater in men than in women at the healed molar sites. Age did not significantly affect the complexity of the implant surgery. Implants can be placed directly in healed mandibular molar sites in most patients who require a complete arch mandibular implant-supported restoration., (Copyright © 2024 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Introduction: The aim of this study was to evaluate the effectiveness of the XP-endo Finisher R (XPFR; FKG Dentaire, La Chaux-de-Fonds, Switzerland) or the Flatsonic ultrasonic tip (Helse Ultrasonic, Santa Rosa de Viterbo, SP, Brazil) in removing remaining filling material after the retreatment of flattened root canals using micro-computed tomographic imaging., Methods: Twenty-four flattened distal root canals of mandibular molars with a buccolingual diameter 4 or more times larger than the mesiodistal diameter were prepared with Reciproc Blue (RB) R40 (VDW GmbH, Munich, Germany) and filled using the Tagger hybrid technique. All canals were retreated with RB R40, and apical enlargement was performed with RB R50 (VDW GmbH). The specimens were randomly distributed into 2 groups: XPFR or Flatsonic (n = 12). The percentage of remaining filling material after retreatment and centralization ability was evaluated. Data were submitted to Mann-Whitney, Wilcoxon, and unpaired t tests (α = 5%)., Results: Greater capacity to remove remaining filling material in the entire canal and the cervical and middle thirds was observed for the Flatsonic compared with the XPFR (P < .05). However, both supplementary cleaning techniques showed a similar percentage of residual filling material in the apical third (P > .05). No difference was observed in the centralization ability between the techniques (P > .05)., Conclusions: The Flatsonic promotes greater removal of remaining filling material than the XPFR in the retreatment of flattened root canals. However, both supplementary cleaning approaches were similar in the apical third. The XPFR and Flatsonic were able to maintain root canal centralization., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Purpose: We aimed to establish a model combining MRI volume measurements from the 1st, 2nd and 3rd molars for age prediction in sub-adults and compare the age prediction performance of different combinations of all three molars, internally in the study cohort., Material and Method: We examined 99 volunteers using a 1.5 T MR scanner with a customized high-resolution single T2 sequence. Segmentation was performed using SliceOmatic (Tomovision©). Age prediction was based on the tooth tissue ratio (high signal soft tissue + low signal soft tissue)/total. The model included three correlation parameters to account for statistical dependence between the molars. Age prediction performance of different combinations of teeth for the three molars was assessed using interquartile range (IQR)., Results: We included data from the 1st molars from 87 participants (F/M 59/28), 2nd molars from 93 (F/M 60/33) and 3rd molars from 67 (F/M 45/22). The age range was 14-24 years with a median age of 18 years. The model with the best age prediction performance (smallest IQR) was 46-47-18 (lower right 1st and 2nd and upper right 3rd molar) in males. The estimated correlation between the different molars was 0.620 (46 vs. 47), 0.430 (46 vs. 18), and 0.598 (47 vs. 18). IQR was the smallest in tooth combinations including a 3rd molar., Conclusion: We have established a model for combining tissue volume measurements from the 1st, 2nd and 3rd molars for age prediction in sub-adults. The prediction performance was mostly driven by the 3rd molars. All combinations involving the 3rd molar performed well., (© 2023. The Author(s).)

Objectives: This study aimed to evaluate the accuracy of an intraoral scanner (IOS - Medit i700) on tooth abutments with vertical preparations at 2 depths below the free gingival margin, and to determine if the IOS can reproduce the area beyond the finish surface of the tested preparation geometry., Methods: Two abutments for a maxillary first molar were designed by means of CAD software, with vertical preparations set at 1 and 2 mm below the gingiva. These abutments were subsequently printed in resin and placed on a reference model. The reference files consisted of scans made using a metrological machine on these abutments. Ten scans were made with the tested IOS on each sample, resulting in two study groups. The scans from the experimental groups were labeled "V-1″ for vertical preparation at 1 mm below the gingival margin and "V-2″ for 2 mm below. The analysis of these scans was performed using Geomagic Control X (3D SYSTEMS) to assess their trueness and precision in µm. Descriptive statistics with a 95 % confidence interval were employed, alongside independent sample tests, to ascertain any differences between the groups (α=0.05)., Results: Statistically significant differences were not found both for trueness (p=.104) and precision (p=.409), between the tested geometries. The mean values for trueness were V-1 = 37.5[31.4-43.6]; V-2 = 32.6[30.6-34.6]. About the precision, the mean values were V-1 = 20.5[8.4-32.5]; V-2 = 18.4[8.2-28.5]. In both the study groups, it was possible to detect the surface beyond the finish area., Conclusions: Within the limitations of this study, vertical preparation design allows for registration of the tooth anatomy beyond the finish area with IOS. Moreover, the mean accuracy values were clinically acceptable at both 1 and 2 mm below the gingival margin., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Aim: The aim of this study was to compare the effectiveness of filling pastes in resin prototype primary molars by cone beam computed tomography (CBCT) and 3D modeling., (This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

BACKGROUND Vital pulp therapy approaches are preferred over non-surgical root canal treatment, giving the advantage of preserving the vitality of the dental pulp and thus maintaining its benefits. Such approaches can be performed in teeth having normal apical area; however, performing vital pulp therapy approaches in teeth associated with periapical pathology remains controversial. CASE REPORT We present a case of a mature mandibular right first permanent molar tooth in a medically fit 10-year-old female diagnosed as asymptomatic irreversible pulpitis with asymptomatic apical periodontitis with periapical radiolucency having a periapical index (PAI) score of 4. Partial pulpotomy was performed instead of non-surgical root canal treatment due to uncooperativeness of the patient. Biodentine was used as a pulp capping material. The tooth was restored with resin composite permanent restoration. Six months after the procedure, an intraoral periapical radiograph revealed normal bone features with complete periapical pathology healing and development of intact lamina dura around the mesial and distal roots. The tooth responded normal to electric pulp testing (EPT), cold, percussion, and palpation tests. CONCLUSIONS Periapical pathology involvement having large periapical radiolucency exhibiting PAI score 4 in inflamed dental pulp tooth diagnosed as irreversible pulpitis does not necessitate non-surgical root canal treatment. Partial pulpotomy should be considered as an alternative treatment to promote the return dental pulp and periapical tissue to a healthy condition. Considering a similar approach in older patients would be interesting to gain a more comprehensive understanding of its potential as a treatment method.

Objectives: To investigate the feasibility of MRI nerve-bone fusion imaging in assessing the relationship between inferior alveolar nerve (IAN) / mandibular canal (MC) and mandibular third molar (MTM) compared with MRI-CBCT fusion., Materials and Methods: The MRI nerve-bone fusion and MRI-CBCT fusion imaging were performed in 20 subjects with 37 MTMs. The Hausdorff distance (HD) value and dice similarity coefficient (DSC) was calculated. The relationship between IAN/MC and MTM roots, inflammatory, and fusion patterns were compared between these two fused images. The reliability was assessed using a weighted κ statistic., Results: The mean HD and DSC ranged from 0.62 ~ 1.35 and 0.83 ~ 0.88 for MRI nerve-bone fusion, 0.98 ~ 1.50 and 0.76 ~ 0.83 for MRI-CBCT fusion. MR nerve-bone fusion had considerable reproducibility compared to MRI-CBCT fusion in relation classification (MR nerve-bone fusion κ = 0.694, MRI-CBCT fusion κ = 0.644), direct contact (MR nerve-bone fusion κ = 0.729, MRI-CBCT fusion κ = 0.720), and moderate to good agreement for inflammation detection (MR nerve-bone fusion κ = 0.603, MRI-CBCT fusion κ = 0.532, average). The MR nerve-bone fusion imaging showed a lower ratio of larger pattern compared to MR-CBCT fusion (16.2% VS 27.3% in the molar region, and 2.7% VS 5.4% in the retromolar region). And the average time spent on MR nerve-bone fusion and MRI-CBCT fusion was 1 min and 3 min, respectively., Conclusions: Both MR nerve-bone fusion and MRI-CBCT fusion exhibited good consistency in evaluating the spatial relationship between IAN/MC and MTM, fusion effect, and inflammation detection., Clinical Relevance: MR nerve-bone fusion imaging can be a preoperative one-stop radiation-free examination for patients at high risk for MTM surgery., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objectives: The trial aimed to compare the clinical performance and radiographic success of ACTIVA BioACTIVE versus Compomer in restoring class-II cavities of primary molars., Materials and Methods: A non-inferior split-mouth design was considered. A pre-calculated sample size of 96 molars (48 per group) with class-2 cavities of twenty-one children whose ages ranged from 5 to 10 years were randomly included in the trial. Pre-operative Plaque Index (PI), DMFT/dmft scores and the time required to fill the cavity were recorded. Over 24 months, the teeth were clinically evaluated every six months and radiographically every 12 months by two calibrated and blinded evaluators using the United States public health service (USPHS)-Ryge criteria. The two-sided 95% confidence interval (CI) for the difference in success rate was considered to assess non-inferiority, and the margin was set at -18%. The linear mixed model and Firth's logistic regression model were used for data analysis (P < 0.05)., Results: After 24 months, 86 teeth (43 per group) were evaluated. The mean PI score was 1.1(± 0.9), while DMFT/dmft was 0.35 (± 0.74) and 6.55 (± 2.25) respectively. The clinical and radiographic success rate of Dyract vs. ACTIVA was 95.3% and 88.3% vs. 93% and 86%, respectively. The two-sided 95% CI for the difference in success rate (-2.3%) was - 3.2 to 1.3% and didn't reach the predetermined margin of -18% which had been anticipated as the non-inferiority margin. Clinically, ACTIVA had a significantly better colour match (P = 0.002) but worse marginal discolouration (P = 0.0143). There were no significant differences regarding other clinical or radiographic criteria (P > 0.05). ACTIVA took significantly less placement time than Dyract, with a mean difference of 2.37 (± 0.63) minutes (P < 0.001)., Conclusion: The performance of ACTIVA was not inferior to Dyract and both materials had a comparable high clinical and radiographic performance in children with high-caries experience. ACTIVA had a significantly better colour match but more marginal discolouration. It took significantly less time to be placed in the oral cavity., Trial Registration: The study was registered at ClinicalTrials.gov on 4 May 2018 (#NCT03516838)., (© 2024. The Author(s).)

This study investigated the prevalence of the middle mesial canal (MMC) and isthmus in a northern Chinese subpopulation using cone-beam computed tomography (CBCT). CBCT images of 1060 mandibular first molars (MFMs) were analysed. Data analysis was performed using the chi-square test, t-test, and multiple logistic regression analysis (p < 0.05). The prevalence of MMC and isthmus was 15.2% and 40.6%, respectively. The average dentinal thickness in the danger zone was 1.61 ± 0.14 mm. Patients younger than 40 years were two times more likely to have MMC (odds ratio [OR] = 2.204). Additionally, for every 1 mm reduction in the MB-ML orifice distance, the likelihood of detection of MMC in MFM nearly doubled (OR = 1.738). Furthermore, MFMs with MB-ML isthmus were five times more likely to exhibit MMC than those without it (OR = 4.756). The findings revealed that the prevalence of MMC and isthmus in MFMs is high and suggested that anatomical and demographic variables can serve as valuable indicators for clinicians in anticipating their presence., (© 2023 Australian Society of Endodontology Inc.)

Background: There are currently no studies that quantitatively compare the relationship of root resorption to the patient's systemic history or craniofacial and intraoral morphology, especially in relation to possible host factors. Thus, this study aimed to clarify the factors associated with root resorption in retained mandibular second deciduous molars with the congenital absence of second premolars and predict the prognosis of retained mandibular second deciduous molars., Methods: A cohort of 5547 patients who visited the orthodontic clinic at Tokyo Medical and Dental University Dental Hospital between 2013 and 2022 was screened. Lateral cephalometric radiographs, panoramic radiographs, upper and lower dental models, and orthodontic treatment questionnaires were used as reference materials to apply the inclusion and exclusion criteria. Ultimately, 111 patients were included in the analyses. The patients were divided into two groups based on the root resorption levels of the retained mandibular second deciduous molars. Those with less root resorption were classified under the good condition (GC) group, whereas those with more root resorption were classified under the poor condition (PC) group. Demographic, clinical, and cephalometric parameters were compared between the groups. A multivariate logistic regression model was used to predict the probability of root resorption., Results: The prevalence of congenitally missing mandibular second premolars with persistent mandibular second deciduous molars was 2.0%. In a total of 111 patients, eighty-three teeth (53.2%) were classified into the GC group, whereas 73 teeth (46.8%) were classified into the PC group. The Frankfort-mandibular plane angle (FMA) [odds ratio (OR): 0.87], Frankfort-mandibular incisor angle (FMIA) (OR: 0.93), overbite (OR: 1.38), adjacent interdental space (OR: 1.46), distance from occlusal plane (OR: 0.80), and caries treatment (OR: 7.05) were significantly associated with the root resorption of the retained mandibular second deciduous molars., Conclusions: Our findings suggest that skeletal morphology, oral morphological patterns, and history contribute to root resorption in retained mandibular second deciduous teeth with congenital absence of subsequent permanent teeth., (© 2024. The Author(s).)

Knowledge of root canal internal anatomy and its variations is important forproper endodontic treatment. It is therefore necessary to investigate morphological aspects among different dental groups in the same patient to define the best protocol for the case., Aim: To evaluate the morphology and symmetry of homologous incisors, premolars and mandibular molars using cone beam computed tomography (CBCT)., Materials and Method: Descriptive statistical analysis was performed for the frequency of categorical variables, and a chi-square test or Fisher 's exact test was used to test whether gender and side were associated with number of roots, number of canals, and Vertucci's classification. Forty-five CBCT scans were evaluated, and 444 mandibular teeth were analyzed. The number of roots, number of canals, classification of the canals in each root according to Vertucci and presence of a symmetrical relationship between pairs of posterior teeth were analyzed., Results: The resuls showed that 74% of mandibular central incisors had type I root canal, 26% of mandibular lateral incisors had type I and, with a significant difference in the number of canals between males and females (p < 0.05). In mandibular first premolars, 70.5% had type I; and in mandibular second premolars, 98.5% had type I. Mandibular first molars had two roots in 98% of the cases. Second mandibular molars had two roots in 92.5% of the cases, one root in 6%, and three roots in 1.5%. Symmetry between central incisors was higher in females than in males., Conclusión: Teeth of the same group can have different morphologies in the same patient., Competing Interests: The authors declare no potential conflicts of interest regarding the research, authorship, and/or publication of this article., (Copyright© 2024 Sociedad Argentina de Investigación Odontológica.)

Objectives: Mineral Trioxide Aggregate (MTA) is considered the gold standard material for pulpotomy procedures. However, some drawbacks such as poor handling and long setting time are challenging when it is used as pulpotomy dressing in primary molars in children. Hence, the purpose of this study was to compare the radiographic and clinical performance of a premixed, fast setting bioceramic root repair material (BC RRM-F) with MTA in vital pulpotomy procedures of primary molars, with or without the added seal of a stainless steel crown (SSC)., Methods: In this double blinded, four-arm, parallel group randomized contolled trial (RCT), 64 primary molars were randomly allocated to one of the four treatment groups: MTA (PDTM MTA WHITE)+SSC, MTA+GI (bulk fill glass ionomer with glass hybrid technology GC EQUIA Forte® HT), BC RRM-F+GI and BC RRM-F+SCC. All molars were evaluated clinically and radiographically according to the modified Zurn and Seale criteria at 1, 3, 6, and 12 months follow up. Multivariate cox regression models and Kaplan-Meier curves were used for survival analysis., Results: There was no statistically significant difference between the success of both pulp capping materials used. Overall survival analysis showed that using GI instead of SCC as a final restorative material was significantly associated with increased risk of failure., Conclusions: TotalFill® BC RRM™ Fast Set Putty can be used as an alternative to MTA in primary molar pulpotomy. Regardless of the pulp capping material, one year survival of pulpotomized primary molars restored with SSC is higher compared to those restored with GC EQUIA Forte® HT., Clinical Significance: Clinicians' preference and cost effectiveness may justify the use of either material in primary molar pulpotomy. Parents insisting on tooth-colored restorations for their children's pulpotomized teeth cannot be told that the expectation for success is the same as those restored with SSC, even if calcium silicate-based pulp capping materials are used., Competing Interests: Declaration of competing interest The investigators declare no conflict of interest., (Copyright © 2024. Published by Elsevier Ltd.)

The articular eminence (AE) is part of the temporal component of the temporomandibular joint (TMJ). The inclination of the AE (AEI) has an important role in TMJ biodynamics, influencing the path of movement of the disc-condyle complex. Although AEI values might change due to tooth loss, little is known about what effect could have the loss of occlusal support in the molar area on AE morphology. AEI was measured on cone-beam computed tomography (CBCT) images of 41 patients (82 TMJs) with or without occlusal support in the molar region. The patients included in this study were divided into four groups: (1) patients with maintained occlusal support in the molar areas on both sides (right and left side) (MM); (2) patients with loss of occlusal support in the molar areas on both sides (right and left side) (LL); (3) patients with loss of occlusal support in the molar area only on the right side, but with maintained occlusal support on the left molar area (LM); (4) patients with loss of occlusal support in the molar area only on the left side, but with maintained occlusal support in the right molar area (ML). AEI values were higher in the TMJs on the side with maintained occlusal support in the molar area (M) than the AEI values measured in TMJs from the side with loss of occlusal support in the molar area (L). AEI values on the right side were higher in the MM patients in comparison to the AEI values on the right side of LL patients. The loss of occlusal support in the molar areas changes the mandibular biodynamics, which might be reflected in the morphological changes at the AE level, where it might cause flattening of the articular slope predominantly on the right side.

Objective: This study examines whether larger enamel prism diameters accommodate a greater enamel volume from the enamel-dentine junction (EDJ) to the outer-enamel surface (OES) in primate molars, and how prism size relates to enamel thickness and crown location., Design: We assessed variation in enamel prism diameter in relation to crown location and enamel thickness in catarrhine lower molars (n = 14 species) and one platyrrhine. Prism diameter and enamel thickness were recorded in four locations (lingual lateral; lingual cuspal; buccal cuspal; buccal lateral), using a buccal-lingual section through the centre of the mesial cusps. Ten prism diameter readings were collected at inner (near the EDJ), outer (near the OES) and middle (between the two locations) enamel for each location., Results: Mean prism diameter values for each species were similar (range: 4.06 µm to 5.81 µm). Prism diameter enlarged from inner to outer enamel, suggesting larger prisms help accommodate the increase in enamel volume from the EDJ to the OES. Average prism diameter does not associate with enamel thickness. Instead, cuspal positions had significantly smaller prism diameter at the EDJ than lateral positions, and larger prism sizes at the OES, leading to an overall similar prism diameter mean for all positions (Lingual lateral: 5.11 µm; Lingual cuspal: 5.04 µm; Buccal cuspal: 4.78 µm; Buccal lateral: 4.99 µm)., Conclusions: Our study revealed consistent average enamel prism diameters in various crown locations of lower primate molars, potentially contributing to the mechanical integrity and functional optimization of enamel in primates., Competing Interests: Declaration of Competing Interest The authors have no competing interest to disclose., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Introduction: This study aimed to assess the influence of different coronal flaring files on dentin removal in mandibular teeth using cone-beam computed tomographic (CBCT) images., Methods: CBCT images of 48 mandibular molar teeth were acquired and randomly divided into 2 main groups, with each main group further divided into 3 subgroups. In the first main group, root canal preparation was performed using TruNatomy (Dentsply Sirona, Ballaigues, Switzerland), ProTaper Gold (Dentsply Sirona), and One Curve (Micro-Mega, Besancon, France) files without the use of coronal flaring files. In the second main group, root canal preparation was performed using the same files with the use of coronal flaring files. After the completion of root canal preparation, a second set of CBCT images was obtained. Subsequently, the dentin removal and remaining critical dentin were assessed by measuring at 4 distinct points below the furcation level. Data were compared between groups using the Mann-Whitney U and Kruskal-Wallis tests with alpha set at 5%., Results: The ProTaper Gold files demonstrated higher dentin removal compared with the TruNatomy files. In the no-flaring groups, the One Curve files exhibited greater dentin removal than the TruNatomy files at specific levels. The use of coronal flaring files generally did not significantly impact dentin removal, except for certain cases in the TruNatomy and ProTaper Gold groups., Conclusions: The TruNatomy instrument group was more effective in preserving pericervical dentin compared with the other instrument groups. Coronal flaring files can be confidently used to preserve critical dentin during root canal treatment., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Polymerization shrinkage is a major side effect of resin composite materials that affects the success and longevity of caries restorations. This study was to analyze the effect of the internal angle and shape of the lining on the shrinkage residual stress of dental restorations in Class II mesio-occlusal-distal (MOD) cavities through finite element analysis (FEA). A 3D reconstructed model of a human mandibular first molar was created from micro-CT images, and then the tooth was prepared as a Class II MOD cavity. 3D models of four regular internal corner shapes of Class II MOD cavities with different internal angles of lining and one 90° filleted corner model were created. The thermal expansion technique was applied to approximate the shrinkage impact of composite resin polymerization in the FE software ABAQUS. Von Mises stress was taken as a metric. The results showed that the level of residual stresses in the Class II MOD cavities was greatly dependent on the internal angle of the lining. The maximum von Mises stress in tooth tissue decreased as the internal angle of the lining increased. The internal shapes of the lining had no obvious effect on the stress, and the filleted corner model had less stress. This lining strategy is appropriate for Class II MOD cavities with serious loss of tooth tissue.

The aim of this study was to assess the centralization and dentin thickness of mesial root canals of the first mandibular molars by microcomputed tomography (micro-CT). Material and methods: Ninety-nine mandibular molars of Vertucci's type IV canals were scanned by micro-CT. The mesiodistal deviation and centroid were assessed, in both mesiobuccal (MB) and mesiolingual (ML) canals, for the apical 4mm and the full canal length. Results: The dentin thickness was similar for both MB and ML canals. The narrowest thickness was in the distal wall of an MB canal (0.07mm), while the widest was found in the mesial wall of an MB canal (2.46mm). In centroid analysis, both the MB and ML canals exhibited deviations when compared to the root centroid, along the full canal length and the apical 4mm. For the MB canal, the mean deviation was 0.83mm (0.02 mm-2.30 mm) for the full canal and 0.18mm (0.01 mm-1.01 mm) for apical 4mm. Similarly, for the ML canal, the mean deviation measured 0.83 mm (0.05mm-3.99mm) for the full canal and 0.21 mm (0.01mm-1.01mm) for the apical 4 mm. Overall, deviations were observed towards the mesial of the roots, with 69% for MB and 57% for ML canals for the full canal, and 51% for MB canals within the 4 mm. The exception was the ML canal, which exhibited a higher deviation towards distal in the apical 4mm, accounting for 52% of cases. The dentin thickness was consistent between the mesial canals of mandibular molars. However, there is no centrality of mesial canals in their roots, with frequent deviation to mesial.

Aim and Background: To compare the root canal volume in primary teeth using hand and rotary instruments and to evaluate root canal filling techniques and flow of root canal obturation materials in the postinstrumented root canal volume using spiral computed tomography (SCT)., Materials and Methods: Freshly extracted 16 primary molars were randomly divided into two groups and subjected to SCT analysis before and after instrumentation. For the manual technique (group I) with eight teeth were prepared using K files, and rotary (group II) eight teeth preparation was performed with ProTaper files. The filled volume in each canal was measured using SCT, and the percentage of obturated volume was calculated. The data were statistically analyzed using the Mann-Whitney U test., Results: There was a statistically significant difference in both groups' volume of root canals enlarged. Even though both K files and the ProTaper system brought about enlarged canals after instrumentation, there was a statistically significant increase in volume after using K files in two canals. In three canals, there was a statistically significant increase in volume after using ProTaper. Irrespective of the obturation technique and materials used, there is no statistically significant difference in the volume after obturation., Conclusion: From the results of this study, the ProTaper file system shows suitable volumetric enlargement up to an optimum level, which is needed in primary root canal walls, and is better in canal shaping, as evidenced by good postobturation volume., Clinical Significance: The traditional method of cleaning and shaping the root canals in permanent teeth using manual stainless-steel files can lead to undesirable curvatures in root canal morphology, making correctly filling the root canals difficult. It is also time-consuming and sometimes leads to iatrogenic errors. Rotary nickel-titanium (Ni-Ti) instrumentation techniques have been developed to overcome these problems. How to cite this article: Yadav DBUC, Varma RB, Kumar JS, et al. Volumetric Analysis of Hand and Rotary Instrumentation, Root Canal Filling Techniques, and Obturation Materials in Primary Teeth Using Spiral CT. J Contemp Dent Pract 2024;25(3):250-259.

OBJECTIVES : Distolingual root of the permanent mandibular first molar (PMFM-DLR) has been frequently reported, which may complicate the treatment of periodontitis. This study aimed to assess the morphological features of PMFM-DLR and investigate the correlation between the morphological features of PMFM-DLR and periodontal status in patients with Eastern Chinese ethnic background. MATERIALS AND METHODS : A total of 836 cone beam computed tomography (CBCT) images with 1497 mandibular first molars were analyzed to observe the prevalence of PMFM-DLR at the patients and tooth levels in Eastern China. Among them, complete periodontal charts were available for 69 Chinese patients with 103 teeth. Correlation and regression analyses were used to evaluate the correlation between the morphological features of DLR, bone loss, and periodontal clinical parameters, including clinical attachment loss (CAL), probing pocket depth (PPD), gingival recession (GR), and furcation involvement (FI). RESULTS : The patient-level prevalence and tooth-level prevalence of DLR in mandibular first molars were 29.4% and 26.3%, respectively. Multiple linear regression analysis suggested that bone loss at the lingual site and CAL were negatively affected by the angle of separation between distolingual and mesial roots in the transverse section, while they were significantly influenced by age and the angle of separation between distobuccal and mesial roots in the coronal section. CONCLUSIONS : The prevalence of PMFM-DLR in Eastern China was relatively high in our cohort. The morphological features of DLR were correlated with the periodontal status of mandibular first molars. This study provides critical information on the morphological features of DLR for improved diagnosis and treatment options of mandibular molars with DLR.

Background: The preparation of the middle mesial (MM) canal of mandibular molars represents a challenge because it is often curved, narrow, and close to the root concave. The purpose of this study was to evaluate the ex vivo shaping ability of 3 nickel-titanium (NiTi) rotary systems in the MM canal using 3D printed resin tooth replicas., Methods: A permanent mandibular first molar with a MM canal was acquired from a pool of extracted teeth and reproduced by a 3D printer. The resin tooth replicas (n = 18) were equally assigned to 3 groups for the evaluation of the shaping abilities of 3 NiTi rotary systems (OneShape [OS], Twisted Files [TF], and ProTaper Gold [PTG]) according to the manufacturer's recommendations. The tooth replicas were scanned by micro-computed tomography (micro-CT) twice before and after instrumentation of the mesiobuccal (MB), mesiolingual (ML), and MM root canals. After 3D reconstruction, the canal straightening, change of root canal volume and surface area, the mesial and distal canal wall thickness and canal transportation at the levels of 1, 2, and 3 mm below furcation were assessed. One-way variance analysis and Turkey's post hoc test were used for comparisons of the means among different groups, and paired-t test was used to compare the mesial and distal sides of the mesial roots., Results: As compared with OS and TF, the use of PTG in preparation of MM canals resulted in significantly more straightening of canal curvature (p < 0.05), greater post-instrumentation canal volume and surface area, and thinner mesial and distal remaining canal wall thickness at 1, 2 and 3 mm below furcation (all p < 0.05). Regarding the root canal transportation in the mesiodistal direction, there was no significant difference among the 3 instruments (all p > 0.05) after the preparation of the MB and ML canals. However, in the MM canal, more pronounced transportation was detected in the PTG group at 2 mm below furcation, and in the TF group at 3 mm below furcation as compared with the other 2 systems (both p < 0.05)., Conclusions: 3D printed tooth replicas have the advantages of consistency and can be an ideal model to evaluate the shaping ability of different instruments in the MM canal. OS and TF files performed similarly and both are appropriate for shaping the MM canal, while PTG may cause excessive and uneven resin removal, especially near the furcation, and may lead to root fragility and procedural errors., (© 2024. The Author(s).)

Objectives: To assess the success rate of spontaneous space closure after extraction of the first permanent molar (FPM) in the maxilla and the mandible, and to identify the factors that make spontaneous space closure most favorable in each., Materials and Methods: A retrospective records-based cohort study was conducted through a search of the database of the Public Dental Service, Stockholm County Council, Stockholm, for young adults born between 2000 and 2001, who underwent extraction of one or more FPM between 2006 and 2016. A total of 995 extracted teeth were identified, of which 203 teeth in 155 patients met the inclusion criteria., Results: Of the 203 extracted teeth, 166 (81.8%) did not receive any orthodontic treatment. The success rate for space closure in orthodontically treated patients was 91.9%. The success rate for spontaneous space closure was 84.3%. All unsuccessful spontaneous space closure in the maxilla occurred in patients older than 12 years. The dental developmental stage of the second permanent molar (SPM) had a statistically significant association with spontaneous space closure in the mandible (P < .001)., Conclusions: The success rate of spontaneous space closure was high (84.3%) and was higher in the maxilla (94.1%) than the mandible (74.1%). Age at time of extraction and dental developmental stage of the SPM were significant factors for successful spontaneous space closure in the maxilla and mandible, respectively., (© 2024 by The EH Angle Education and Research Foundation, Inc.)

This experimental anatomic study aimed to investigate the correlations between the mesio-vestibular canal (MB1) and the second mesio-vestibular canal (MB2) of the mesio-vestibular root of the upper sexts using cone-beam computed tomography (CBCT) imaging. A total of 24 extracted maxillary first molars were collected and subjected to CBCT imaging. The presence, location, and morphology of MB1 and MB2 canals were evaluated using axial, coronal, and sagittal CBCT sections. The interrelation between MB1 and MB2 canals was assessed, including their separate canals, merging, and division points. Among the 24 maxillary first molars examined, 86.5% demonstrated the presence of an MB2 canal in addition to MB1. The MB2 and MB1 were confluent in 80% of the cases with a confluent height of 4,16 mm. The mean distance between MB1 and MB2 canals was 1.85 mm. This study provides detailed information on the anatomic correlations between MB1 and MB2 canals of the mesio-vestibular root in the upper sexts using CBCT imaging. The high prevalence of MB2 canals suggests their significance in endodontic procedures and emphasizes the importance of thorough exploration and identification during root canal treatment. The knowledge of the location and morphology of these canals can aid in successful endodontic therapy and enhance treatment outcomes., Competing Interests: The authors report no conflicts of interest., (Copyright © 2024 by Mutaz B. Habal, MD.)

Introduction: Mesiodistal angulation of premolars and molars can be altered by forces of open bite malocclusion. The aim of this study was to compare the mesiodistal angulations of the posterior teeth in class I, II, and III individuals with anterior open bite (AOB) versus individuals with harmonious occlusion., Methods: This comparative cross-sectional study used 299 lateral head radiographs of individuals with permanent dentition. There were 4 groups (harmonious occlusion [n=89], Class I open bite [OB] [n=75], Class II OB [n=66], and Class III OB [n=69]). Premolar (1UPM, 2UPM) and molar (1UM, 2UM) angulations were measured relative to the occlusal plane and the palatal or mandibular plane by a trained and calibrated evaluator. ANOVA and Scheffe tests were used for statistical analyses (P<0.05)., Results: The mesial angulation of the upper premolars showed greater angulation of between approximately 2° and 5° in the OB groups compared to the harmonious occlusion group (P<0.05). Only in the Class II OB group did the first and second upper molars show distal angulation in relation to the palatal plane (1UM 81.85°±5.42°; 2UM 75.32±7.4°) (P<0.05). The Class III OB group presented the greatest distal angulations of the lower premolars and molars (between 3° to 5° of difference, P<0.05) in relation to those of the harmonious occlusion group., Conclusions: The upper first premolars in all the AOB groups and the lower second premolars in the Class II OB group had greater mesioangulation. Additionally, the upper molars of the Class II OB group and the lower molars of the Class III OB group showed distoangulation compared with the molars in the group with harmonious occlusion., (Copyright © 2023 CEO. Published by Elsevier Masson SAS. All rights reserved.)

Aim: The integrity of primary dentition is essential in the development of the jaws and permanent occlusion. The consequences of a premature loss of primary molars are: space loss, crowding, risk of impaction of the permanent teeth, ectopic eruption, anomalous inclination of the teeth adjacent to the loss molar, reduction of arch length. The mesial displacement of the posterior permanent teeth during eruption can cause a loss of space, which can be regained with orthodontic appliances. Therefore, a careful diagnosis is of great importance to be able to decide what appliance is indicated to recover from this situation. Molar distalisation consists in displacing permanent molars distally, allowing them to reach class I relationship and to recover the correct space for the second bicuspids when the second deciduous molar has been lost early., Methods: The aim of this study is to carry out a narrative literature review regarding the different appliances and their effectiveness in regaining space after premature loss of the upper primary molars., Conclusion: The paediatric dentist should be aware of the advantages and disadvantages related to each device and select the most appropriate distalisation appliance based on an individual plan of diagnosis and a careful treatment. The distalisation of the upper molar must be adequately stabilised and so it is important to consider also some retainers such as Nance's appliance, the Palatal Plate, the extraoral traction, the utility arch, or II Class elastic bands.

The aim of this study was to evaluate the feasibility of immediate implantation for chronic peri-apical periodontitis in the molar region. Seventy-four molars were selected and allocated randomly to two groups. The experimental group (n = 38) received immediate implantation by flap surgery and the control group (n = 36) received delayed implantation. CBCT was performed immediately after surgery (T1) and 12 months after the permanent repair (T3). The implant survival rate at T3 was 100% in both groups. There was no significant difference in buccal or lingual vertical marginal bone loss between the groups (P = 0.515, P = 0.736). However, the buccal horizontal margin bone loss was significantly greater in the experimental group: 0.98 ± 0.34 mm vs 0.77 ± 0.27 mm in the control group (P = 0.003). In the experimental group, the highest point of buccal and lingual implant-bone contact increased at T3. The buccal and lingual jump gap widths were 3.21 ± 1.10 mm and 2.92 ± 1.01 mm at T1, and CBCT showed no jump gap around the implants at T3. The clinical outcomes showed immediate implantation to be feasible for chronic peri-apical periodontitis in the molar region., Competing Interests: Competing interests None., (Copyright © 2023 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Pediatric endodontics has become popular due to advancements in cleaning, shaping and irrigation systems, resulting in faster and effective removal of infected pulp, saving time, and creating a pathogen-free environment. The patented rotary file system, Kedo-S, designed for primary teeth, introduced a single file generation for efficient pulp therapy. However, there are currently no studies assessing canal preparation in primary mandibular molars using nano-CT (computed Tomography). To evaluate the volumetric changes of two recently introduced pediatric rotary file systems in comparison with conventional hand file systems in primary mandibular molar using an ultra-high resolution nano-CT. This in-vitro study was performed in extracted primary mandibular molar based on certain inclusion and exclusion criteria. Samples were prepared and working length was determined before the pre-operative scan using a high resolution nano-CT device (SkyScan 2214, Bruker, Kontich, Belgium). A single well-experienced pediatric dentist prepared the canals using three file systems: Kedo-S plus, Kedo-SG blue and Hand K-files. A post-operative scan was performed similar to pre-operative scan. Image reconstruction was performed with NRecon software for 3D volumetric visualization and analysis of the root canals. Kedo-SG blue file systems had the highest mean difference in the canal volume (8.85%). Hand K-files had the least difference at (1.24%) of canal volume. Kedo-S plus file system had a mean canal volume difference (6.14%) which is closer to hand K-files. Rotary file systems resulted in a significant enlargement of canals compared to hand files., Competing Interests: The authors declare no conflict of interest., (©2024 The Author(s). Published by MRE Press.)

The purpose of this study is to estimate chronological age and determine whether individuals were aged under or over 18 years using root pulp visibility (RPV) in cone-beam computed tomography (CBCT) images. The study included CBCT images of 699 individuals aged between 15 and 75 years. One thousand twenty-three mandibular second molar (2M) teeth were evaluated using Olze's RPV method in four stages. Descriptive statistics of the stages and the relationship between the stages and the chronological age were assessed. The distribution of the stages was analyzed according to the 18-year age threshold. There was a positive correlation between RPV stages and chronological ages in both sexes. For females and males, the mean ages of stage 0, stage 1, and stage 2, for females and males, were found as 27.21, 28.93, and 33.68 years, and 37.69, 40.9, and 44.88 years, respectively. Stage 0 and stage 1 were found both in individuals aged under and over 18 years, and stage 2 and stage 3 were not observed in individuals aged under 18 years. The presence of stage 2 and stage 3 may be an indication that an individual is aged over 18 years according to Olze's RPV age estimation method. For more reliable results, 2M teeth should be examined bilaterally in forensic science., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Objective: To compare the stress distribution and total strain applied to the dentition, periodontal ligament (PDL) and cortical and trabecular bones by three Class II correctors using finite element analysis., Design: Three-dimensional analysis of stresses and total strain of the dentition with three Class II correctors., Setting: Computational study., Methods: Three-dimensional finite element models of Class II elastics, the Forsus Fatigue Resistant Device (FRD) and the Carriere Motion Appliance (CMA) were constructed from a cone-beam computed tomography (CBTC) image of an orthodontic Class II patient. The distribution of stress (von Mises and principal stress) and the total strain (mm) in maxillo-mandibular dentition, PDL, cortical and trabecular bone were analysed., Results: The highest von Mises yield and the maximum principal stress in the three models were found at the teeth, followed by the cortical bone, trabecular bone and PDL. The maximum stress and total deformation were located at the upper canines and lower molars in the Class II elastics and CMA models, in the upper first molars in the Forsus FRD and CMA, and in the lower first premolars in the Forsus FRD. In addition, stress was distributed in the anterior and posterior regions of the teeth, and the total deformation was found in the distal direction in the upper arch and in the mesial direction in the lower arch., Conclusion: The stress concentrations in the three models were located close to the active components of each appliance, producing specific patterns of stress distribution and displacement that should be taken into account when planning the type of appliance to be used for the correction of the Class II malocclusion., Competing Interests: Declaration of conflicting interestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Objective: This study aimed to evaluate the effect of WaveOne Glider (WOGG) with Waveone Gold (WOG) primary reciprocation systems on root dentine microcrack formation and to know the effect of TruNatomy Glider (TRNG) with TruNatomy (TRN) prime rotary systems on root dentine microcrack formation., Methods: In this study, 40 extracted mandibular first molar roots were selected and divided randomly into four groups (n=10). Group MWOG: a manual glide path was performed + WOG primary. Group MTRN: manual glide path performed+TRN prime. Additionally, group WOGG: glide path preparation with WOGG+WOG primary. Finally, for group TRNG, the glide path preparation was performed with TRNG+TRN prime. Micro-CT was used for pre and post-instrumentation image analysis. Statistical analysis was performed using the Kruskal- Wallis test (p<0.05) with Two-way ANOVA., Results: The Kruskal-Wallis test showed no significant differences among all groups in all thirds for pre and post-instrumentation regarding the crack formation. The Two-way ANOVA showed no significant difference or interaction between the ways of glide path preparation, whether manual or reciprocal WOGG, or between the rotary TRNG and the motion used in root canal preparation (rotary TRN or reciprocal WOG) regarding the crack formation and propagation., Conclusion: Microcrack formation and propagation occurred independently of using different glide path techniques (manual, rotary, or reciprocal).

The utilization of optimal orthodontic force is crucial to prevent undesirable side effects and ensure efficient tooth movement during orthodontic treatment. However, the sensitivity of existing detection techniques is not sufficient, and the criteria for evaluating optimal force have not been yet established. Here, by employing 3D finite element analysis methodology, we found that the apical distal region (A-D region) of mesial roots is particularly sensitive to orthodontic force in rats. Tartrate-resistant acidic phosphatase (TRAP)-positive osteoclasts began accumulating in the A-D region under the force of 40 grams (g), leading to alveolar bone resorption and tooth movement. When the force reached 80 g, TRAP-positive osteoclasts started appearing on the root surface in the A-D region. Additionally, micro-computed tomography revealed a significant root resorption at 80 g. Notably, the A-D region was identified as a major contributor to whole root resorption. It was determined that 40 g is the minimum effective force for tooth movement with minimal side effects according to the analysis of tooth movement, inclination, and hyalinization. These findings suggest that the A-D region with its changes on the root surface is an important consideration and sensitive indicator when evaluating orthodontic forces for a rat model. Collectively, our investigations into this region would aid in offering valuable implications for preventing and minimizing root resorption during patients' orthodontic treatment., (© 2024. The Author(s).)

Objective: The purpose of the study was to determine how the maxillary non-impacted third molars impact the distal region of alveolar bone of adjacent second molars., Method and Materials: The periodontal condition of maxillary second molars for which the neighboring third molars were missing (NM3- group) and those with intact non-impacted third molars (NM3+ group) was analyzed in a retrospective study. Using CBCT, the patients were categorized based on the presence or absence of periodontitis, and the alveolar bone resorption parameters in the distal area of the second molars were measured., Results: A total of 135 patients with 200 maxillary second molars were enrolled in this retrospective study. Compared to the NM3- group, the second molars of the NM3+ group exhibited greater odds of increasing alveolar bone resorption in the distal region (health, OR = 3.60; periodontitis, OR = 7.68), regardless of the presence or absence of periodontitis. In healthy patients, factors such as female sex (OR = 1.48) and age above 25 years old (OR = 2.22) were linked to an elevated risk of alveolar bone resorption in the distal region of the second molars. In patients with periodontitis, male sex (OR = 3.63) and age above 45 years old (OR = 3.97) served as risk factors., Conclusions: Advanced age, sex, and the presence of non-impacted third molars are risk factors associated with alveolar bone resorption in individuals with adjacent second molars. In addition, the detrimental effects of non-impacted third molars in the population with periodontitis may be exacerbated. From a periodontal perspective, this serves as supportive evidence for the proactive removal of non-impacted third molars.

Introduction: Understanding the anatomy of root canal systems and being aware of their variations is crucial for successful endodontic treatment. Specifically, the intricate and diverse nature of the root anatomy in maxillary third molars poses a significant challenge for dental clinicians. The study analyzed the morphology of the root canal system in maxillary third molars among residents of the Lower Silesia region in Poland using cone beam computed tomography (CBCT)., Material and Methods: This retrospective cross-sectional imaging study was conducted at the X-Ray Diagnostics Laboratory of the Academic Dental Polyclinic of Wroclaw Medical University, Poland. The study evaluated 316 CBCT scans and included 196 maxillary third molars. They were obtained from 118 females and 78 males over the age of 18, in the period from January to April 2022 (three consecutive months). The number of roots, root canals, and root canal configurations according to Vertucci's classification were analyzed., Results: Three-rooted maxillary molars were found most often (64.29%), followed by single-rooted (24.49%), two-rooted (7.65%), and four-rooted (3.57%) teeth. Among all the roots examined, Vertucci Type I root canals were the most prevalent. Our research found that single-rooted forms (40 teeth, 33.89% vs. 8 teeth, 10.26%, p = 0.0013) of maxillary third molars were significantly more common in females than in males. However, three-rooted forms (62 teeth, 79.49% vs. 64 teeth, 54.24%, p = 0.0013) of maxillary third molars were significantly more common in males than in females., Discussion: In the Lower Silesia region, the typical maxillary third molar in the Polish population has a three-rooted structure with Vertucci Type I root canal configuration. We noted a sex-dependent correlation in maxillary third molar morphology, with single-rooted forms more prevalent in women and three-rooted forms in men., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Olczyk et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Objective: The aim of this study was to evaluate six files on the pericervical dentin (PCD) and the smallest dentin thickness zones (SDTZ) in mesial root canals of mandibular molars., Materials and Methods: Sixty mandibular molars with two mesial canals and Vertucci configuration were aleatory allocated in 6 experimental groups of 10 molars and 20 root canals. Specimens were scanned before instrumentation using the SkyScan 1275 (Bruker microCT, Kontich, Belgium). Group 1 was treated with WaveOne Gold (WG), group 2 with Reciproc Blue (RB), group 3 with TRUShape (TS), group 4 with XP-endo Shaper (XP), group 5 with iRace (IR), and group 6 with TruNatomy (TN). After instrumentation, the molars were scanned again and the images recorded were reconstructed with the NRecon v.1.7 (Bruker micro-CT) and analyzed with CTAn v.1.20.8 software (Bruker micro-CT) quantifying the changes produced in the surface, volume, structure thickness, SMI, and centroids at the Pericervical Dentin area of the root canals (PCD) located from the root canal orifices at the floor of the pulp chamber to 4 mm in the apical direction, and the changes in the Smallest Dentin Thickness Zones (SDTZ) located (from the furcation to 4 mm and 7 mm in the apical direction. The data obtained were compared using Wilcoxon and ANOVA with a 5% significance level., Results: XP and TN were similar in all the parameters (P >.05) at the PCD, but TN showed significant differences from WG, RB, TS, and IR (P <.05), while XP showed significant differences from WG (P <.05) in volume, surface, and structure thickness. Regarding the changes in the SDTZ, the amount of dentin removed was similar between the groups in both canals at the middle 1/3, at the cervical 1/3 for MB canals, and in ML canals for RB, TS, XP, IR, and TN (P>.05). The action of WG was significantly different from that of XP and TN in the cervical 1/3 of the ML canal (P <.05)., Conclusions: XP and TN rotatory files with small taper and volume maintained better with minor changes at the PCD and SDTZ, while WG reciprocation file produced the largest change. All the files were maintained centered at the PCD, and their performances were safe with a minimal thickness higher 0.5 mm at the SDTZ, and without risk of perforation., Trial Registration: No clinical trials were indicated in this study., Clinical Relevance: The choice of endodontic files is a relevant factor in the conservative performance of root canal treatments., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objective: This study aimed to evaluate the impact of molar teeth distalization movement by clear aligners on changes in the alveolar bone thickness and orthodontically induced inflammatory root resorption (OIIRR) in maxillary molars using conebeam computed tomography (CBCT)., Materials and Methods: Three-dimensional CBCT scans of 35 adult patients (one hundred forty maxillary molars) with pre-designed selection criteria and a mean age of 24.4 ± 7.1 years were included. The measured parameters, including alveolar bone thickness for maxillary molars and root resorption (OIIRR), were analyzed using pre-and post-treatment CBCT (T0 and T1, respectively) with Invivo 6.0 software., Result: Post-treatment, relevant statistically significant changes included deposition of bone in the average palatal surface of the 1st molars. The reduction of bone was seen in the average buccal surface of the first molars and both surfaces of the second molars. Regarding root length after treatment, the average maxillary 1st molar roots showed significant OIIRR (p < 0.001)., Conclusion: Clear aligner treatment could effectively reduce the incidence of alveolar bone thickness reduction and OIIRR in treating Class II malocclusions compared to conventional braces, as shown in previous studies. This research will aid in fully grasping the benefits of clear aligners., (© 2024. The Author(s).)

Background: The purpose of this study is to evaluate the marginal adaptation of bulk-fill resin composites with different viscosities (paste-like and flowable) in Class II restorations using micro-CT imaging., Methods: Forty extracted human molars were used. Mesial and distal Class II box cavities (approximately 3 mm x 3 mm x 4 mm) were prepared for each tooth, with cavity floors located 1 mm below the enamel-cementum junction. Following adhesive application, teeth were restored using eight different groups: Group XB: X-tra Base Bulk-fill Flowable (VOCO), Group XF: X-tra Fill Bulk-fill (VOCO), Group FB: Filtek Bulk-fill Posterior (3 M ESPE), Group FF: Filtek Bulk-fill Flowable (3 M ESPE), Group BB: Beautifil-Bulk (SHOFU), Group BF: Beautifil-Bulk Flowable (SHOFU), and Group CO: "as a control group", Clearfil Majesty Posterior (KURARAY) and Group CF: "as a control group", Clearfil Majesty Flow + Clearfil Majesty Posterior (KURARAY). The restored teeth underwent an aging protocol involving 1000 cycles in a water bath fluctuating between 5 ± 1.0 °C and 55 ± 1.0 °C. Post-aging, teeth were immersed in 50% silver nitrate solution for 24 h and then in a film developer solution for 8 h. Microleakage analysis was performed using micro-CT, evaluated with 3D Slicer software. A two-way ANOVA was employed for statistical analysis., Results: Two-way ANOVA results indicated significant effects of both viscosity (p < 0.0001) and composite type (p < 0.0001) on marginal adaptation. Viscosity analysis (comparing flowable and paste-like) revealed no significant differences in the FB-FF, XB-XF and BB-BF groups but significant differences in the and CO-CF group, with flowable type exhibiting less microleakage than paste-like type., Conclusions: The study suggests that while the viscosity of bulk-fill composites did not significantly affect marginal adaptation, the brand of bulk-fill composite did influence it., (© 2024. The Author(s).)

Objective: To analyse the anterior teeth effects of clear aligners on five different patterns of mandibular molar movement and to define the most effective configuration to be implemented with clear aligners through finite element analysis., Methods: A three-dimensional mandibular model with a deep overbite in the mandible was constructed using cone beam computerized tomography (CBCT) data. The model included the mandibular dentition, mandibular periodontal ligaments, attachments, and aligners. Five models were created: (1) configuration A: second molar distalization (0.25 mm); (2) configuration B: second molar distalization (0.25 mm), first molar extrusion (0.15 mm); (3) configuration C: second molar distalization (0.25 mmm), first and second premolar extrusion(0.15 mm); (4) configuration D: second molar distalization (0.25 mm), first molar and first/second premolar extrusion(0.15 mm); and (5) configuration E: second molar distalization (0.25 mm), first molar and first/second premolar extrusion (0.15 mm), first molar and first/second premolar expansion (0.15 mm)., Results: In all configurations, the anterior teeth exhibited labial tipping and the mandibular central incisor of configuration E showed the highest labial tipping. Configuration E demonstrated a relatively minor impact on mandibular molars distalization compared with configuration A. Configuration A showed the highest distal displacement value, and configuration E produced the lowest displacement value. Configuration E caused the highest periodontal ligament (PDL) pressure of the central and lateral incisors. The differences in the canines between configurations C and D,were not significant, and the stress distribution differed among the five groups., Conclusions: All patterns utilizing clear aligners facilitated mandibular molar distalization. Extruding the premolars and second molar distalization at the same time had little impact on second molar distalization; When expansion and extrusion were simultaneously performed during the distalization of mandibular molars, our prime consideration was the alveolar bone on the labial side of the anterior teeth to prevent the occurrence of gingival recession, dehiscence, and fenestration. Due to the lack of consideration for periodontal tissues in this study, clinical protocols should be designed based on the periodontal status of the mandibular anterior teeth., (© 2024. The Author(s).)

Objectives: To identify the ocuurrence, distribution, and factors associated with lost molars and furcation defects in a sample of the Bulgarian population., Material and Methods: The full mouth cone-beam computed tomography of 56 male and 57 female patients, aged between 19 and 84 years, were examined. A comprehensive evaluation was performed on a total of 675 molars-339 in maxilla and 336 in mandible. Associations with variables such as age, gender, and periodontal disease were analyzed., Results: With aging the number of missing teeth and interradicular lesions increased. No significant links between gender and molar loss (p = .64) or gender and furcation involvement (p = .25) was found. Periodontitis was strongly associated with both studied dental problems (p < .001). The occurrence of furcation defects was more frequently observed in the maxilla than in the mandible., Conclusion: The occurrence and distribution of lost molars and furcation defects is substantial within the studied sample. Further investigation with a larger patient cohort is needed. Pertinent healthcare strategies to address the observed dental health issues also have to be developed., (© 2024 The Authors. Clinical and Experimental Dental Research published by John Wiley & Sons Ltd.)