Search

(1) Background: This report aims to illustrate the development, progression, diagnosis, and treatment of chronically present articular surface lesions. (2) Methods: In this report, two patients are described from the point of the initial presentation of symptoms to surgical consultation based on radiologic findings. These patients underwent corrective surgery in the form of mosaicplasty to repair lesions present on the articular surface and the underlying subchondral bone. (3) Discussion: Diagnosing juvenile OCD remains challenging due to its variable clinical presentation and minute radiologic discoveries. X-rays are useful; however, the gold standard remains arthroscopy, which can be both diagnostic and therapeutic. Future prospects include the use of novel sonographic methods and the use of artificial intelligence within the given modalities. (4) Conclusions: The detailed imaging provided by MRI, combined with the insights from X-rays and potentially other modalities, allows for a nuanced understanding of this disease. This comprehensive approach ensures that treatment decisions are well-informed, optimising outcomes for young patients with this condition. [ABSTRACT FROM AUTHOR]

The article focuses on the clinicoradiological outcomes of arthroscopic-assisted reduction and internal fixation of tibial plateau fractures. Topics include the surgical challenges and advantages of using arthroscopy for precise fracture reduction and stable fixation; the clinical and radiological outcomes based on the modified Rasmussen criteria; and the potential complications and limitations of this surgical technique.

Osteochondritis dissecans (OCD) of the humeral capitellum is an important cause of elbow disability in young athletes. Large and unstable lesions sometimes require joint reconstruction with osteochondral autograft. Several approaches have been described to expose the capitellum for the purpose of treating OCD. The posterior anconeus-splitting approach and the lateral approach with or without release of the lateral ligamentous complex are the most frequently used for this indication. The surface accessible by these approaches has not been widely studied. This study compared the extent of the articular surface of the capitellum that could be exposed with the Kocher approach (without ligament release) vs. the posterior anconeus-splitting approach. A secondary outcome was the measurement of any additional area that could be reached with lateral ulnar collateral ligament release (Wrightington approach). The 3 approaches were performed on 8 adult cadaveric elbows: first, the Kocher approach; then, the anconeus-splitting approach; and finally, the Wrightington approach. The visible articular surface was marked out after completion of each approach. The mean articular surface of the capitellum was 708 mm2 (range, 573-830 mm2). The mean visible articular surface was 49% (range, 43%-60%) of the total surface with the Kocher approach, 74% (range, 61%-90%) with the posterior anconeus-splitting approach, and 93% (range, 91%-97%) with the Wrightington approach. Although the Kocher approach provided access to the anterior part of the capitellum, the anconeus-splitting approach showed adequate exposure to the posterior three-quarters of the articular surface and overlapped the most posterior part of the Kocher approach. A combination of the 2 lateral ulnar collateral ligament–preserving approaches allowed access to 100% of the joint surface. Most OCD lesions are located in the posterior area of the capitellum and can therefore be reached with the anconeus-splitting approach. When OCD lesions are located anteriorly, the Kocher approach without ligament release is efficient. A combination of these 2 approaches enabled the entirety of the joint surface to be viewed. [ABSTRACT FROM AUTHOR]

(1) Background: This report aims to illustrate the development, progression, diagnosis, and treatment of chronically present articular surface lesions. (2) Methods: In this report, two patients are described from the point of the initial presentation of symptoms to surgical consultation based on radiologic findings. These patients underwent corrective surgery in the form of mosaicplasty to repair lesions present on the articular surface and the underlying subchondral bone. (3) Discussion: Diagnosing juvenile OCD remains challenging due to its variable clinical presentation and minute radiologic discoveries. X-rays are useful; however, the gold standard remains arthroscopy, which can be both diagnostic and therapeutic. Future prospects include the use of novel sonographic methods and the use of artificial intelligence within the given modalities. (4) Conclusions: The detailed imaging provided by MRI, combined with the insights from X-rays and potentially other modalities, allows for a nuanced understanding of this disease. This comprehensive approach ensures that treatment decisions are well-informed, optimising outcomes for young patients with this condition.

Introduction: The aim of this study was to investigate the radiological outcomes of proximal closing metacarpal extension osteotomies using patient-specific guides and instruments (PSI) in early-stage trapeziometacarpal osteoarthritis to gain further insight into the joint loading surface and the benefits of the procedure. Methods: In a prospective observational study, nine patients were included between 11/2020 and 12/2021, undergoing a total of ten proximal metacarpal extension osteotomies for basal thumb osteoarthritis. Computer-assisted surgical planning was performed using computed tomography (CT) and three-dimensional (3D) segmentation, allowing the fabrication of 3D-printed PSIs for surgical treatment. Inclusion criteria were a 1-year follow-up by CT to assess postoperative correction of the positional shift of the first metacarpal (MC1) and the location of peak loads compared with the preoperative situation. Results: Radiographic analysis of the peak loading zone revealed a mean displacement on the articular surface of the trapezius of 0.4 mm ± 1.4 mm to radial and 0.1 mm ± 1.2 mm to palmar, and on the articular surface of the MC1 of 0.4 mm ± 1.4 mm to radial and 0.1 mm ± 1.2 mm to dorsal. Conclusion: There were trends indicating that a flatter pressure distribution and a dorsal shift of the peak loading zone may contribute to an improvement in subjective pain and patient satisfaction associated with this surgical procedure. The non-significant radiological results and the minor dorsal-radial shifts in our small study group limit a firm conclusion. Level of evidence: III. [ABSTRACT FROM AUTHOR]

Copyright of Equine Veterinary Journal is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objectives: Synovial joints in human limbs strike a balance between mobility, stability, and articular fit, yet little is known about how these conflicting demands pattern intraspecific variation in articular shape. In this study, we use geometric morphometrics to establish the apportionment and magnitude of morphological variance of the articular surfaces of the human shoulder, elbow, hip, and knee. We hypothesize that variances will be comparable between articulating surfaces within a joint and will be larger in joints with smaller ranges of motion, given their plurality of functional demands. Materials and Methods: Three‐dimensional landmarks were taken on the articular surfaces of the glenohumeral, humeroulnar, acetabulofemoral, and tibiofemoral joints from CT scans of 200 skeletons from the University of Tennessee Donated Skeletal Collection (84 females, 116 males). Root mean‐squared distances between articulations calculated from Procrustes shape coordinates were used to determine variance distributions. Results: We found no difference in variances for each articular surface between the sexes or between left and right articular surfaces. A high range of motion is associated with greater morphological variance; however, this pattern is largely driven by the concave articular surfaces of each joint, which consistently exhibit statistically greater variance than their convex counterparts. Discussion: The striking pattern of differential variance between articulating morphologies points to potential disparities in development between them. Consistently higher variance in concave surfaces may relate to chondral modeling theory for the formation of joints. Establishing intraspecific morphological variance patterns is a first step in understanding coordinated evolution among articular features. [ABSTRACT FROM AUTHOR]

Objectives: Limb synovial joints exhibit complex shapes that must accommodate often‐antagonistic demands of function, mobility, and stability. These demands presumably dictate coordination among joint articular shapes, but the structure of morphological covariance within and among joints is unknown. This study analyzes the human shoulder, elbow, hip, and knee to determine how articular covariance is structured in relation to joint structure, accessory cartilage, and function. Materials and Methods: Surface models were created from the CT scans of 200 modern skeletons from the University of Tennessee Donated Skeletal Collection. Three‐dimensional landmarks were collected on the shoulder, elbow, hip, and knee joints. Two‐block partial least squares were conducted to determine associations between surfaces of conarticular shapes, functionally analogous articulations, and articulations belonging to the same bone. Results: Except for the components of the shoulder, all conarticular pairs exhibit covariance, though the strength of these relationships appears unrelated to the amount of accessory cartilage in the joint. Only the analogous articulations of the humerus and femur exhibit significant covariance, but it is unlikely that this pattern is due to function alone. Stronger covariance within the lower limb than the upper limb is consistent broader primate patterns of within‐limb integration. Discussion: With the exception of the elbow, complementary joint function does not appear to promote strong covariance between articulations. Analogous humeral and femoral surfaces are also serially homologous, which may result in the articular associations observed between these bones. Broadly, these patterns highlight the indirect relationship between joint congruence and covariance. [ABSTRACT FROM AUTHOR]

Bone age assessment is of great significance to genetic diagnosis and endocrine diseases. Traditional bone age diagnosis mainly relies on experienced radiologists to examine the regions of interest in hand radiography, but it is time-consuming and may even lead to a vast error between the diagnosis result and the reference. The existing computer-aided methods predict bone age based on general regions of interest but do not explore specific regions of interest in hand radiography. This paper aims to solve such problems by performing bone age prediction on the articular surface and epiphysis from hand radiography using deep convolutional neural networks. The articular surface and epiphysis datasets are established from the Radiological Society of North America (RSNA) pediatric bone age challenge, where the specific feature regions of the articular surface and epiphysis are manually segmented from hand radiography. Five convolutional neural networks, i.e., ResNet50, SENet, DenseNet-121, EfficientNet-b4, and CSPNet, are employed to improve the accuracy and efficiency of bone age diagnosis in clinical applications. Experiments show that the best-performing model can yield a mean absolute error (MAE) of 7.34 months on the proposed articular surface and epiphysis datasets, which is more accurate and fast than the radiologists. The project is available at https://github.com/YameiDeng/BAANet/, and the annotated dataset is also published at https://doi.org/10.5281/zenodo.7947923.

Articular surface irregularities are often observed in collapsed femoral heads with osteonecrosis, while the effects of the degree of collapse on the articular surface are poorly understood. We first macroscopically assessed the articular surface irregularities on 2‐mm coronal slices obtained using high‐resolution microcomputed tomography of 76 surgically resected femoral heads with osteonecrosis. These irregularities were observed in 68/76 femoral heads, mainly at the lateral boundary of the necrotic region. The mean degree of collapse was significantly larger for femoral heads with articular surface irregularities than for those without (p < 0.0001). Receiver operating characteristic analysis showed that the cutoff value for the degree of collapse in femoral heads with articular surface irregularities at the lateral boundary was 1.1 mm. Next, for femoral heads with <3‐mm collapse (n = 28), articular surface irregularities were quantitatively assessed based on the number of automatically counted negative curvature points. Quantitative evaluation showed that the degree of collapse was positively correlated with the presence of articular surface irregularities (r = 0.95, p < 0.0001). Histological examination of articular cartilage above the necrotic region (n = 8) revealed cell necrosis in the calcified layer and abnormal cellular arrangement in the deep and middle layers. In conclusion, articular surface irregularities of the necrotic femoral head depended on the degree of collapse, and articular cartilage was already altered even in the absence of macroscopically determined gross irregularities. [ABSTRACT FROM AUTHOR]

The treatment of medial tibial plateau fractures can be challenging due to poor exposure of the articular surface. Therefore, a medial epicondyle osteotomy may be needed. Current methods describe osteotomy of the medial femoral epicondyle. However, this method requires additional detachment of the medial meniscus in order to ensure proper visualization. The aim of this study is to present a new technique using distal osteotomy of the superficial medial collateral ligament and to analyze the area of the exposed articular surface area. On each of eight fresh-frozen human cadaveric knees (mean age: 79.4 ± 9.4 years), an osteotomy and proximal reflection of the distal insertion of the superficial medial collateral ligament combined with a submeniscal arthrotomy was performed, followed by a medial epicondyle osteotomy. Using a three-dimensional measurement arm (Absolute Arm 8320-7, Hexagon Metrology GmbH), the exposed area was analyzed and compared to the entire medial articular surface using ANOVA (p < 0.05). Through the medial epicondyle osteotomy, 39.9 ± 9.7% of the anteromedial articular surface was seen. This area was significantly smaller compared to the osteotomy of the distal insertion of the superficial collateral ligament with an exposed articular surface of 77.2 ± 16.9% (p = 0.004). Thus, the distal osteotomy exposed 37.3% more of the articular surface compared to the medial epicondyle osteotomy. None of these techniques were able to adequately expose the posteromedial- and medial-most aspects of the tibial plateau. A distal superficial collateral ligament osteotomy may be superior to a medial epicondyle osteotomy when an extension of the anteromedial approach to the tibial plateau is required. A distal superficial medial collateral ligament osteotomy combines the advantages of better exposure of the medial articular surface with preservation of the blood supply to the medial meniscus. However, surgeons should carefully consider whether such an extended approach is necessary, as it significantly increases invasiveness. [ABSTRACT FROM AUTHOR]

The treatment of medial tibial plateau fractures can be challenging due to poor exposure of the articular surface. Therefore, a medial epicondyle osteotomy may be needed. Current methods describe osteotomy of the medial femoral epicondyle. However, this method requires additional detachment of the medial meniscus in order to ensure proper visualization. The aim of this study is to present a new technique using distal osteotomy of the superficial medial collateral ligament and to analyze the area of the exposed articular surface area. On each of eight fresh-frozen human cadaveric knees (mean age: 79.4 ± 9.4 years), an osteotomy and proximal reflection of the distal insertion of the superficial medial collateral ligament combined with a submeniscal arthrotomy was performed, followed by a medial epicondyle osteotomy. Using a three-dimensional measurement arm (Absolute Arm 8320-7, Hexagon Metrology GmbH), the exposed area was analyzed and compared to the entire medial articular surface using ANOVA (p < 0.05). Through the medial epicondyle osteotomy, 39.9 ± 9.7% of the anteromedial articular surface was seen. This area was significantly smaller compared to the osteotomy of the distal insertion of the superficial collateral ligament with an exposed articular surface of 77.2 ± 16.9% (p = 0.004). Thus, the distal osteotomy exposed 37.3% more of the articular surface compared to the medial epicondyle osteotomy. None of these techniques were able to adequately expose the posteromedial- and medial-most aspects of the tibial plateau. A distal superficial collateral ligament osteotomy may be superior to a medial epicondyle osteotomy when an extension of the anteromedial approach to the tibial plateau is required. A distal superficial medial collateral ligament osteotomy combines the advantages of better exposure of the medial articular surface with preservation of the blood supply to the medial meniscus. However, surgeons should carefully consider whether such an extended approach is necessary, as it significantly increases invasiveness.

Abstract Background An inflamed and thickened medial patellar plica (MPP) caused by repeated mechanical irritation from trauma or overuse leads to impingement between the anterior medial femoral condyle and the medial articular facet of the patella and produces pain or clicking, which is known as MPP syndrome. In patients with MPP syndrome, cartilage damage may occur depending on the shape of the MPP and the duration of the impingement. Case presentation Preoperative magnetic resonance imaging in a 17-year-old male patient with MPP syndrome showed a hypertrophic MPP along with an abnormal notch in the articular surface of the medial femoral condyle. We considered that the impinged hypertrophic plica between the anterior medial femoral condyle and the medial articular facet of the patella resulted in cartilage damage on the articular surface of the medial femoral condyle. However, during arthroscopic surgery, we found that the cartilage of the notch, which was located beneath the MPP, was completely intact. We concluded that this abnormal notch had developed gradually in the MPP without cartilage damage. Conclusions Surgeons should be mindful that acquired plica-induced notches in the articular surface of the medial femoral condyle can present in patients with MPP syndrome.

Abstract Background The tibial slope plays an important role in knee surgery. However, standard radiographic measurement techniques have a low reproducibility and do not allow differentiation between medial and lateral articular surfaces. Despite availability of three-dimensional imaging, so far, no real 3D measurement technique was introduced and compared to radiographic measurement, which were the purposes of this study. Methods Computed tomography scans of 54 knees in 51 patients (41 males and 10 females) with a mean age of 46 years (range 22–67 years) were included. A novel 3D measurement technique was applied by two readers to measure the tibial slope of medial and lateral tibial plateau and rim. A statistical analysis was conducted to determine the intraclass correlation coefficient (ICC) for the new technique and compare it to a standard radiographic measurement. Results The mean 3D tibial slope for the medial plateau and rim was 7.4° and 7.6°, for the lateral plateau and rim 7.5° and 8.1°, respectively. The mean radiographic slope was 6.0°. Statistical analysis showed an ICC between both readers of 0.909, 0.987, 0.918, 0.893, for the 3D measurement of medial plateau, medial rim, lateral plateau and lateral rim, respectively, whereas the radiographic technique showed an ICC of 0.733. Conclusions The proposed novel measurement technique shows a high intraclass agreement and offers an applicable opportunity to assess the tibial slope three-dimensionally. Furthermore, the medial and lateral articular surfaces can be measured separately and one can differentiate the slope from the plateau and from the rim. As three-dimensional planning becomes successively more important, our measurement technique might deliver a useful supplement to the standard radiographic assessment in slope related knee surgery. Level of evidence Level III, diagnostic study.

Objective: To introduce a new fluoroscopic method for assessing the quality of medial and lateral joint surface reduction during internal fixation of patellar fractures and to summarize the clinical outcomes of patients treated using this method., Methods: A retrospective analysis was conducted on the clinical data of 52 patients with patellar fractures treated between January 2018 and January 2022 who met the inclusion criteria. There were 27 male and 25 female patients, aged 21-75 years, with an average age of 62 years. The types of patellar fractures included 9 transverse fractures, 37 comminuted fractures, and 6 longitudinal fractures. According to the AO/Orthopaedic Trauma Association (AO-OTA)-2018 fracture classification, there were 21 cases of type 34A, 6 cases of type 34B, and 25 cases of type 34C. The time from injury to operation ranged from 1 to 5 days, with an average of 2.3 days. Treatments included internal fixation with hollow screws or hollow screw tension bands, with or without anchor repair. During operation, the medial and lateral joint surfaces of the patella were observed using the tangential fluoroscopic method to assess the smoothness of reduction of the median ridge, lateral joint surface, medial joint surface, and lateral joint edge. Patients were followed up regularly, and X-ray films were taken to observe fracture healing. Knee joint range of motion, Böstman score, and Lysholm score were used to evaluate functional recovery., Results: The tangential fluoroscopic method for the medial and lateral joint surfaces of the patella during operation showed satisfactory reduction of the joint surfaces and good positioning of the implants. All patients were followed up 12-16 months, with an average of 13.4 months. During the follow-up, fracture displacement occurred in 1 case and titanium cable breakage in 1 case. All patella fractures healed successfully, with a healing time of 8-16 weeks (mean, 11.4 weeks). At last follow-up, knee joint range of motion ranged from 120° to 140°, with an average of 136°. The Böstman score ranged from 20 to 30, with an average of 28, yielding excellent results in 45 cases and good results in 7 cases. The Lysholm score ranged from 88 to 100, with an average of 93, yielding excellent results in 40 cases and good results in 12 cases., Conclusion: The intraoperative application of the tangential fluoroscopic method for the medial and lateral joint surfaces of the patella can quickly determine the fluoroscopic plane of the patella, accurately assess the quality of fracture reduction and the position of internal fixator, thereby improving effectiveness.

Background: Hemi-hamate arthroplasty is one of the treatment options for dorsal proximal interphalangeal joint fracture dislocation. Many studies reported favorable outcomes. However, some long term studies demonstrated the degenerative change of PIP joint. The articular mismatch of the hemi-hamate autograft might play an important role of this complication. Methods: We studied the anatomy of distal articular surface of the hamate bone in embalmed hamate bones. The anatomy of distal articular surface and dimensions of the hamate bone were measured and recorded. Results: Seventy hamate bones were dissected out from embalmed cadavers and included in this study. The mean angle of the 4th metacarpal articulation was 85.54 degrees (SD = 3.53) and mean angle of the 5th metacarpal articulation was 95.51 degrees (SD = 3.57). The inter-articular ridge was approximately 5 degrees radial inclination. Conclusions: The inter-articular ridge of distal articular surface was approximately 5 degrees radial inclination. In order to minimize the graft mismatch, we recommend making the bone cut with the saw blade tilted to radial side 5 degrees to achieve better alignment of inter-articular ridge of the graft. [ABSTRACT FROM AUTHOR]

The free surface of the articular cartilage must withstand compressive and shearing forces, maintain a low friction coefficient and allow oxygen and metabolites to reach the underlying matrix. In many ways it is critical to the physiology of the whole tissue and its disruption always involves deep pathological alterations and loss of the joint integrity. Being very difficult to image with section‐based conventional techniques, it was often described by previous research in conflicting terms or entirely overlooked. High‐magnification face‐on observations with high resolution scanning electron microscopy and with scanning probe microscopy revealed a very thin, delicate superficial layer rich in glycoconjugates, which may explain the very low friction coefficient of the tissue but which was very easily altered and/or dissolved in the preparation. Beneath this superficial sheet lies a thicker coat of thin, highly uniform, slightly wavy collagen fibrils lying parallel to the surface and mutually interconnected by a huge number of interfibrillar glycosaminoglycan bridges. These bridges and the collagen fibrils form an extended reticular structure able to redistribute tensile and compressive stress across a larger area of the surface and hence a greater volume of tissue. [ABSTRACT FROM AUTHOR]

Objective To determine the visible size of the distal humeral articular surface by using a novel combined medial‐lateral approach as an alternative method of surgical treatment for intra‐articular distal humeral fractures. Methods In this anatomical study, 12 adult fresh‐frozen cadaveric elbows were randomly divided into a medial‐lateral group and an olecranon osteotomy group, with 6 in each group. In the medial‐lateral group, a medial approach was first used, and then a lateral approach. The sizes of the distal humeral articular surface exposed by each incision and the joined size were measured and calculated. In the olecranon osteotomy group, a posterior olecranon osteotomy approach was applied, and the maximal visible sizes of the articular surface were marked and calculated. Ratios of the maximal sizes of the distal humeral articular surface of the two approaches were compared. Results In the medial‐lateral group, the medial approach could expose 2/5 of the medial trochlea and 1/3 of the capitellum, while the mean visible size of the distal humeral articular surface was 6.8 cm2, 34.8% of the entire surface; the lateral approach can expose 3/7 of the capitellum and 1/4 of the medial trochlea, while the mean visible size of the distal humeral articular surface was 6.7 cm2, 33.9% of the whole surface; for the combined medial‐lateral approach, the mean scope exposed of the medial and lateral visible articular surface was 38.2% and 43.1%, respectively. Meanwhile, in the olecranon osteotomy group, the posterior olecranon osteotomy was found to expose most of the posterior distal humeral articular surface, except for 1/3 of the anterior trochlea and 1/4 of the anterior capitellum, and the visible range of articular surface was 65.3%. The combined medial‐lateral approach exposed 9.2 cm2 in total, 46.9% of the whole distal humeral articular surface, which averaged 19.6 cm2. However, the visible size of the distal humeral articular surface for the olecranon osteotomy approach was 13.7 cm2, 63.1% of the entire distal humeral articular surface, which averaged 21.3 cm2. There was a significant difference observed between the medial‐lateral group (46.9%) and the olecranon osteotomy group (63.1%) for the maximal visible size of the distal humeral articular surface (t = 7.201, P = 0.001). Conclusions The combined medial‐lateral approach can expose 46.9% of the distal humeral articular surface, concentrating on the anterior part, so it can be recommended to treat intra‐articular fractures with a simple pattern in the posterior with the anterior side of the distal humerus less comminuted.

Background: An inflamed and thickened medial patellar plica (MPP) caused by repeated mechanical irritation from trauma or overuse leads to impingement between the anterior medial femoral condyle and the medial articular facet of the patella and produces pain or clicking, which is known as MPP syndrome. In patients with MPP syndrome, cartilage damage may occur depending on the shape of the MPP and the duration of the impingement.Case Presentation: Preoperative magnetic resonance imaging in a 17-year-old male patient with MPP syndrome showed a hypertrophic MPP along with an abnormal notch in the articular surface of the medial femoral condyle. We considered that the impinged hypertrophic plica between the anterior medial femoral condyle and the medial articular facet of the patella resulted in cartilage damage on the articular surface of the medial femoral condyle. However, during arthroscopic surgery, we found that the cartilage of the notch, which was located beneath the MPP, was completely intact. We concluded that this abnormal notch had developed gradually in the MPP without cartilage damage.Conclusions: Surgeons should be mindful that acquired plica-induced notches in the articular surface of the medial femoral condyle can present in patients with MPP syndrome. [ABSTRACT FROM AUTHOR]

Osteochondral defects are often symptomatic and lead to deranged joint function. The spontaneous healing capacity of osteochondral defects is limited. In this case study, use of an acellular scaffold capable of induction of mesenchymal stem-cell migration is described. This scaffold was used on an Outerbridge grade IV medical condylar defect measuring ~2 cm2. At 24 mo follow-up, the articular surface appeared restored by MRI, and the patient returned to sports. [ABSTRACT FROM AUTHOR]

Purpose: Anatomic reduction in tibial plateau fractures remains to be demanding. For further visualisation of and approach to the joint surface an extended lateral approach using a lateral femoral epicondyle osteotomy and subluxation of the lateral meniscus was recently described. First clinical and radiographic mid-term results of this technique are presented in this feasibility study. Method: Ten complex tibial plateau fractures treated with extended lateral approach and lateral meniscal subluxation were prospectively analysed. Clinical and radiographic results were objectified according to the Rasmussen scores. Results: After a median follow-up of 8.6 (IQR 4.3) months good to excellent clinical and radiographic results were noted. The clinical Rasmussen Score showed a median of 25 (IQR 2.8) and radiographic a median of 17 (IQR 2.0) points. Conclusion: Good to excellent clinical and radiological scores were obtained after using an extended lateral approach with lateral femoral epicondyle osteotomy and central meniscus subluxation. No approach specific complications could be observed. [ABSTRACT FROM AUTHOR]

Background and objectives: The morphometry of talus represents its biomechanical role in transmission of body weight. The objective of the study was to find the shape of trochlea and its correlation with other articular surfaces. Methodology: A total of 160 dry Tali of unknown sex were utilised for this study, its trochlear surface length-anterior, middle and posterior breadth [TSL, TSAB, TSMB and TSPB], calcaneal surface length & breadth [CSL and CSB] and navicular surface length & breadth [NSL and NSB] were measured using digital vernier caliper. Trochlear surface angle [TSA] and depth angle [DA] were calculated using image J software. The mean and standard deviation of the parameters were calculated. Side differences between the parameters were calculated by independent sample t test and the strength of association between the parameters was calculated by Pearson’s correlation coefficient. Results: The results were trochlear surface length, anterior, middle and posterior breadth [29.6 ± 2.7,31 ± 2.5,28.2 ±2.6 and 21.4 ± 2.1mm], navicular surface length & breadth [29.7 ± 2.5 & 20.5 ± 1.7mm] and calcaneal surface length & breadth [30 ± 2.4 &19.8 ± 1.6mm]. The mean trochlear surface and depth angle were 9.7 ± 3.3 and 156 ± 5.1degrees. There was significant correlation between the parameters of the articular surfaces. Conclusion: The present study helps in understanding the morphology of talus and the role of articular surfaces in load transmission.

Introduction: Injuries of the proximal interphalangeal joint ranging from simple sprain to fracture dislocation, are most common injuries of the hand labelled as jammed finger. The management of these injuries are difficult and challenging to hand surgeon with potential long term sequelae of residual pain and stiffness. So our aim is to evaluate the result of volar plate advancement arthroplasty in these injuries. Materials and Methods: This is a retrospective study conducts between 2013 to 2017. In our study 10 cases (8 male and 2 female with average age 26.9y) of fracture dislocation of PIP joint with average 5.3 weeks after injury, operated by advancement of volar plate arthroplasty (in 3 case as a primary and in 7 cases as a secondary reconstructive procedure) with inclusive criteria of unstable joint and > 40% involvement of volar surface of middle phalanx. Results: The average follow up was 20.9 months with preoperative ROM was 15.70. The ROM improved to 910 in fresh and 720 in late cases . The result of over- all study shows good result with functional gain in range of movement. Discussion: The surgeon must choose an appropriate treatment based on fracture pattern, joint stability , duration. Stability of the joint is paramount in determining the appropriate treatment, which should aim to facilitate early mobilisation and restoration of function. Conclusion: volar plate arthroplasty gives stable joint and functional range of motion.

Background: The tibial slope plays an important role in knee surgery. However, standard radiographic measurement techniques have a low reproducibility and do not allow differentiation between medial and lateral articular surfaces. Despite availability of three-dimensional imaging, so far, no real 3D measurement technique was introduced and compared to radiographic measurement, which were the purposes of this study.Methods: Computed tomography scans of 54 knees in 51 patients (41 males and 10 females) with a mean age of 46 years (range 22-67 years) were included. A novel 3D measurement technique was applied by two readers to measure the tibial slope of medial and lateral tibial plateau and rim. A statistical analysis was conducted to determine the intraclass correlation coefficient (ICC) for the new technique and compare it to a standard radiographic measurement.Results: The mean 3D tibial slope for the medial plateau and rim was 7.4° and 7.6°, for the lateral plateau and rim 7.5° and 8.1°, respectively. The mean radiographic slope was 6.0°. Statistical analysis showed an ICC between both readers of 0.909, 0.987, 0.918, 0.893, for the 3D measurement of medial plateau, medial rim, lateral plateau and lateral rim, respectively, whereas the radiographic technique showed an ICC of 0.733.Conclusions: The proposed novel measurement technique shows a high intraclass agreement and offers an applicable opportunity to assess the tibial slope three-dimensionally. Furthermore, the medial and lateral articular surfaces can be measured separately and one can differentiate the slope from the plateau and from the rim. As three-dimensional planning becomes successively more important, our measurement technique might deliver a useful supplement to the standard radiographic assessment in slope related knee surgery.Level Of Evidence: Level III, diagnostic study. [ABSTRACT FROM AUTHOR]

Open reduction–internal fixation via an anterior or posterior approach is a widely used method for treating displaced glenoid fractures. This study aimed to identify the exposure range of the glenoid rim by these 2 approaches (deltopectoral and Judet approaches) and provide reference data for the choice of surgical approach. Twelve cadaveric shoulders were dissected. Both deltopectoral and Judet approaches were performed on each shoulder to mark the glenoid fracture. In addition, the shoulder was disarticulated to record the exposure range of the glenoid rim. For the deltopectoral approach, the range of the exposed glenoid rim was from 5:50 to 11:30, which accounted for about 47.2% of the clock face. For the Judet approach, the range of the exposed glenoid rim was from 1:30 to 6:20, which accounted for about 40.3% of the clock face. Along the inferior glenoid, there was an area of partial overlap for the 2 approaches. The superior glenoid rim located from 11:30 to 1:30 was considered inaccessible, as it could not be exposed by the 2 approaches. Less than 50% of the glenoid rim can be exposed by the deltopectoral or Judet approach. With a single approach, it may be difficult to expose and fix some complex glenoid fractures. The superior part of the glenoid fracture is the non-access area via the deltopectoral or Judet approach. [ABSTRACT FROM AUTHOR]

Arthroscopic treatment is an effective technique for osteochondral lesion of talus (OLT); however, some patients still suffer pain and limitation of activities after surgery. The purpose of this study was to evaluate the efficacy of extracorporeal shock wave therapy (ESWT) after ankle arthroscopy for OLT. We reviewed the clinical history of a series of 78 patients with OLT who underwent arthroscopic microfracture. ESWT was prescribed for 15 patients who complained of ankle pain and restriction of weightbearing activities 3 months postoperatively. The parameters assessed were visual analog scale (VAS) and American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot scale scores (before ESWT, at 6 and 12 weeks, and at last follow-up after ESWT) and magnetic resonance imaging (MRI) before and 1 year after ESWT. Follow-up was 27.8 ± 15.2 months. VAS and AOFAS scores showed a significant improvement at 12 weeks after ESWT and a progressive trend at last follow-up. Areas of lesions in sagittal plane in MRI were distinctly reduced at last follow-up. ESWT for osteochondral lesions of talus after arthroscopy results in good clinical outcomes. [ABSTRACT FROM AUTHOR]

Purpose: The existing literature on lateral atlantoaxial joints is predominantly on bony facets and is unable to explain various C1-2 motions observed. Geometric morphometry of facets would help us in understanding the role of cartilages in C1-2 biomechanics/kinematics. Objective: Anthropometric measurements (bone and cartilage) of the atlantoaxial joint and to assess the role of cartilages in joint biomechanics. Materials and Methods: The authors studied 10 cadaveric atlantoaxial lateral joints with the articular cartilage in situ and after removing it, using three-dimensional laser scanner. The data were compared using geometric morphometry with emphasis on surface contours of articulating surfaces. Results: The bony inferior articular facet of atlas is concave in both sagittal and coronal plane. The bony superior articular facet of axis is convex in sagittal plane and is concave (laterally) and convex medially in the coronal plane. The bony articulating surfaces were nonconcordant. The articular cartilages of both C1 and C2 are biconvex in both planes and are thicker than the concavities of bony articulating surfaces. Conclusion: The biconvex structure of cartilage converts the surface morphology of C1-C2 bony facets from concave on concavo-convex to convex on convex. This reduces the contact point making the six degrees of freedom of motion possible and also makes the joint gyroscopic.

Objective: To determine the visible size of the distal humeral articular surface by using a novel combined medial‐lateral approach as an alternative method of surgical treatment for intra‐articular distal humeral fractures. Methods: In this anatomical study, 12 adult fresh‐frozen cadaveric elbows were randomly divided into a medial‐lateral group and an olecranon osteotomy group, with 6 in each group. In the medial‐lateral group, a medial approach was first used, and then a lateral approach. The sizes of the distal humeral articular surface exposed by each incision and the joined size were measured and calculated. In the olecranon osteotomy group, a posterior olecranon osteotomy approach was applied, and the maximal visible sizes of the articular surface were marked and calculated. Ratios of the maximal sizes of the distal humeral articular surface of the two approaches were compared. Results: In the medial‐lateral group, the medial approach could expose 2/5 of the medial trochlea and 1/3 of the capitellum, while the mean visible size of the distal humeral articular surface was 6.8 cm2, 34.8% of the entire surface; the lateral approach can expose 3/7 of the capitellum and 1/4 of the medial trochlea, while the mean visible size of the distal humeral articular surface was 6.7 cm2, 33.9% of the whole surface; for the combined medial‐lateral approach, the mean scope exposed of the medial and lateral visible articular surface was 38.2% and 43.1%, respectively. Meanwhile, in the olecranon osteotomy group, the posterior olecranon osteotomy was found to expose most of the posterior distal humeral articular surface, except for 1/3 of the anterior trochlea and 1/4 of the anterior capitellum, and the visible range of articular surface was 65.3%. The combined medial‐lateral approach exposed 9.2 cm2 in total, 46.9% of the whole distal humeral articular surface, which averaged 19.6 cm2. However, the visible size of the distal humeral articular surface for the olecranon osteotomy approach was 13.7 cm2, 63.1% of the entire distal humeral articular surface, which averaged 21.3 cm2. There was a significant difference observed between the medial‐lateral group (46.9%) and the olecranon osteotomy group (63.1%) for the maximal visible size of the distal humeral articular surface (t = 7.201, P = 0.001). Conclusions: The combined medial‐lateral approach can expose 46.9% of the distal humeral articular surface, concentrating on the anterior part, so it can be recommended to treat intra‐articular fractures with a simple pattern in the posterior with the anterior side of the distal humerus less comminuted. [ABSTRACT FROM AUTHOR]

The multiple ligament injured knee (knee dislocation) is oftentimes part of a multisystem injury complex that can include injuries not only to knee ligaments but also to blood vessels, skin, nerves, bones (fractures), head, and other organ system trauma. These additional injuries can affect surgical timing for knee ligament reconstruction and also affect the results of treatment. This article presents the author's approach and experience to the initial assessment and treatment of the multiple ligament injured (dislocated) knee. [ABSTRACT FROM AUTHOR]