Search

Adjustable speed drives involve common-mode voltages, which generate common-mode currents flowing to the ground through stray capacitances of electric machines. These currents are known to provoke premature motor-bearing failures, as well as electromagnetic interferences disturbing neighbor electronic devices. Furthermore, high-voltage applications involve high levels of these conducted emissions, which must be lowered by using bulky and expensive filters. This paper aims at elaborating a new pulsewidth-modulation (PWM) strategy in order to reduce the common-mode currents generated by three-level neutral-point-clamped inverters. The proposed strategy also provides the ability to balance the neutral point of the dc-bus capacitors. Experimental results both in time and frequency domains confirm that the new PWM improves the electromagnetic-compatibility behavior of the drive compared with conventional strategies. Index Terms--Common-mode currents, electromagnetic compatibility (EMC), neutral-point-clamped (NPC) inverters, pulsewidth modulation (PWM), variable-speed drives.

The aim of this paper is to explain the intrinsic short-circuit tolerance of an IGBT multicell inverter when a commutation failure occurs. Such a failure may either be a wrong gate voltage (malfunctioning of the driver board, auxiliary power supply failure, dv / dt disturbance) or an intrinsic IGBT failure (over-voltage/avalanche stress, temperature overshoot). IGBT stresses are studied and show that no opening of the bonding can appear and consequently no risk of explosion. That is why, owing to the imbricated cells structure, an IGBT short-circuit failure may be withstood for a few switching periods, with nevertheless nonoptimized output waveforms. The design, the lab-test of a sensor able to perform monitoring as well as the failure diagnosis are also presented. This real-time diagnosis allows either a safe stop or a remedial control strategy based on the reconfiguration of the PWM modulator. The reconfiguration strategy enables decrease internal stresses and optimize the output shape. A fail-safe operating may be gained for high power applications. Index Terms--Fail-safe operation, faults, multicell converters, multilevel converters, redundancy.

Component counts and oversimplified reliability rules may lead to the conclusion that multilevel converters are less safe than two-level converters, just because they use more components. A better approach might be to consider that they use a different arrangement of components and also that the consequence of faults may be very different. This paper is focused on the study of the consequences of faults in hard-switching and soft-switching multicell converters. Solutions to minimize the consequences of major faults are described. Index Terms--Fault currents, fault detection, fault location, fault tolerance, insulated gate bipolar transistors, multilevel systems, power electronics, power systems harmonics.