Search

Biopolymers are a versatile and diverse class of materials that has won high interest due to their potential application in several sectors of the economy, such as cosmetics, medical materials/devices, and food additives. In the last years, the search for these compounds has explored a wider range of marine organisms that have proven to be a great alternative to mammal sources for these applications and benefit from their biological properties, such as low antigenicity, biocompatibility, and biodegradability, among others. Furthermore, to ensure the sustainable exploitation of natural marine resources and address the challenges of 3R's policies, there is a current necessity to valorize the residues and by-products obtained from food processing to benefit both economic and environmental interests. Many extraction methodologies have received significant attention for the obtention of diverse polysaccharides, proteins, and glycosaminoglycans to accomplish the increasing demands for these products. The present review gives emphasis to the ones that can be obtained from marine biological resources, as agar/agarose, alginate and sulfated polysaccharides from seaweeds, chitin/chitosan from crustaceans from crustaceans, collagen, and some glycosaminoglycans such as chondroitin sulfate and hyaluronic acids from fish. It is offered, in a summarized and easy-to-interpret arrangement, the most well-established extraction and purification methodologies used for obtaining the referred marine biopolymers, their chemical structure, as well as the characterization tools that are required to validate the extracted material and respective features. As supplementary material, a practical guide with the step-by-step isolation protocol, together with the various materials, reagents, and equipment, needed for each extraction is also delivered is also delivered. Finally, some remarks are made on the needs still observed, despite all the past efforts, to improve the current extraction and purification procedures to achieve more efficient and green methodologies with higher yields, less time-consuming, and decreased batch-to-batch variability., (© 2024. The Author(s).)

The fungal cell wall and secreted exopolysaccharides play an important role in the interactions between fungi and their environment. Despite their central role in fungal biology, ecology, and host-pathogen interactions, the composition of these polymers and their synthetic pathways are not well understood. The protocols presented in this article describe an approach to isolate fungal cell wall polysaccharides and to identify and quantify the monosaccharide composition of these polymers by gas chromatography-mass spectrometry (GC-MS). © 2023 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol: O-methyl trimethylsilyl monosaccharide derivatives composition analysis by GC-MS Support Protocol: Fungal cell wall extraction., (© 2023 The Authors. Current Protocols published by Wiley Periodicals LLC.)

Rice starch has been used in various agri-food products due to its hypoallergenic properties. However, rice starch has poor solubility, lower resistant starch content with reduced retrogradation and poor functional properties. Hence, its industrial applications are rather limited. The lack of comprehensive information and a holistic understanding of the interaction between rice starch and endo/exogenous constituents to improve physico-chemical properties is a prerequisite in designing industrial products with enhanced functional attributes. In this comprehensive review, we highlight the potentials of physically mixing of biopolymers in upgrading the functional characteristics of rice starch as a raw material for industrial applications. Specifically, this review tackles rice starch modifications by adding natural/synthetic polymers and plasticizers, leading to functional blends or composites in developing sustainable packaging materials, pharma- and nutraceutical products. Moreover, a brief discussion on rice starch chemical and genetic modifications to alter starch quality for the deployment of rice starch industrial application is also highlighted., (Copyright © 2021 Elsevier B.V. All rights reserved.)

We present facile methods to obtain purified sporopollenin exine capsules, and provide mass balances for classical and novel purification procedures. An ionic liquid, tetrabutyl phosphonium hydroxide turned out to be the most effective in removing the intine wall. The sporopollenin capsules were investigated by fluorescent microscopy, AFM, solid-state NMR and infrared Raman spectroscopy. The latter two methods showed that sunflower and rape exines have different proportions of O-aliphatic and aromatic constituents. Purified exine capsules were coated with functionalized fluorophores. The procedures presented in this paper could contribute to further spread of the applications of this hollow, and chemically highly resistant material.

Objectives: Analysis of oral dysbiosis in individuals sharing genetic and environmental risk factors with rheumatoid arthritis (RA) patients may illuminate how microbiota contribute to disease susceptibility. We studied the oral microbiota in a prospective cohort of patients with RA, first-degree relatives (FDR) and healthy controls (HC), then genomically and functionally characterised streptococcal species from each group to understand their potential contribution to RA development., Methods: After DNA extraction from tongue swabs, targeted 16S rRNA gene sequencing and statistical analysis, we defined a microbial dysbiosis score based on an operational taxonomic unit signature of disease. After selective culture from swabs, we identified streptococci by sequencing. We examined the ability of streptococcal cell walls (SCW) from isolates to induce cytokines from splenocytes and arthritis in ZAP-70-mutant SKG mice., Results: RA and FDR were more likely to have periodontitis symptoms. An oral microbial dysbiosis score discriminated RA and HC subjects and predicted similarity of FDR to RA. Streptococcaceae were major contributors to the score. We identified 10 out of 15 streptococcal isolates as S. parasalivarius sp. nov., a distinct sister species to S. salivarius . Tumour necrosis factor and interleukin 6 production in vitro differed in response to individual S. parasalivarius isolates, suggesting strain specific effects on innate immunity. Cytokine secretion was associated with the presence of proteins potentially involved in S. parasalivarius SCW synthesis. Systemic administration of SCW from RA and HC-associated S. parasalivarius strains induced similar chronic arthritis., Conclusions: Dysbiosis-associated periodontal inflammation and barrier dysfunction may permit arthritogenic insoluble pro-inflammatory pathogen-associated molecules, like SCW, to reach synovial tissue., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2021. No commercial re-use. See rights and permissions. Published by BMJ.)

The present study was aimed to evaluate the suitability of agro-wastes and crude vegetable oils for the cost-effective production of poly-β-hydroxybutyrate (PHB), to evaluate growth kinetics and PHB production in Alcaligenes faecalis RZS4 and Pseudomonas sp. RZS1 with these carbon substrates and to study the biodegradation of PHB accumulated by these cultures. Alcaligenes faecalis RZS4 and Pseudomonas sp. RZS1 accumulates higher amounts of PHB corn (79.90% of dry cell mass) and rice straw (66.22% of dry cell mass) medium respectively. The kinetic model suggests that the Pseudomonas sp. RZS1 follows the Monod model more closely than A. faecalis RZS4. Both the cultures degrade their PHB extract under the influence of PHB depolymerase. Corn waste and rice straw appear as the best and cost-effective substrates for the sustainable production of PHB from Alcaligenes faecalis RZS4 and Pseudomonas sp. RZS1. The biopolymer accumulated by these organisms is biodegradable in nature. The agro-wastes and crude vegetable oils are good and low-cost sources of nutrients for the growth and production of PHB and other metabolites. Their use would lower the production cost of PHB and the low-cost production will reduce the sailing price of PHB-based products. This would promote the large-scale commercialization and popularization of PHB as an ecofriendly bioplastic/biopolymer.

There is a great demand for the development of novel wound dressings to overcome the time and costs of wound care performed by a vast number of clinicians, especially in the current overburdened healthcare systems. In this study, Cyanoflan, a biopolymer secreted by a marine unicellular cyanobacterium, was evaluated as a potential biomaterial for wound healing. Cyanoflan effects on cell viability, apoptosis, and migration were assessed in vitro, while the effect on tissue regeneration and biosafety was evaluated in healthy Wistar rats. The cell viability and apoptosis of fibroblasts and endothelial cells was not influenced by the treatment with different concentrations of Cyanoflan, as observed by flow cytometry. Moreover, the presence of Cyanoflan did not affect cell motility and migratory capacity, nor did it induce reactive oxygen species production, even revealing an antioxidant behavior regarding the endothelial cells. Furthermore, the skin wound healing in vivo assay demonstrated that Cyanoflan perfectly adapted to the wound bed without inducing systemic or local oxidative or inflammatory reaction. Altogether, these results suggest that Cyanoflan is a promising biopolymer for the development of innovative applications to overcome the many challenges that still exist in skin wound healing.

While continuous (perfusion) culture of mammalian cells might reduce the reactor size owing to the high cell density, there is the problem of higher medium cost; however, this problem is expected to be solved by the reuse of growth-promoting components in the culture supernatant. The polymer fraction (PF, 10 kDa-220 nm) collected from the supernatant of serum-free repeated-batch culture of Chinese hamster ovary (CHO) cells in not only adhesion but also suspension promoted the cell growth in respective serum-free cultures. PF contained CD81-positive exosomes and proteins, both of which were necessary for its growth-promoting activity. Consequently, the medium cost for the continuous (perfusion) serum-free suspension culture of CHO cells may be decreased by the repeated collection and addition of PF that contains exosomes and growth factor proteins., (Copyright © 2020. Published by Elsevier B.V.)

Alternative methods for insulin delivery instead of subcutaneous injection in diabetic patients is of great essential, and biocompatible polymers are one of the most efficient vehicles for this purpose. This research aims to investigate the capability of tragacanthic acid (TA) to bind insulin and release it under physiological conditions without alteration in the structure and conformation of insulin. Interactions between TA and insulin were studied using spectroscopic techniques and computational modeling by docking and molecular dynamics simulations. Our results demonstrate an entropy-driven spontaneous interaction between insulin and TA, where hydrogen bonds act as the main enthalpic contribution. According to our findings, the weak interaction between insulin and TA provides the basis for efficient capture and appropriate release of insulin by TA as a potential part of the insulin delivery system. In conclusion, tragacanth acid can be a proper candidate for insulin delivery., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This work deals with the use of microwave hydrodiffusion and gravity (MHG) for the recovery of hybrid carrageenans with specific mechanical features together with bioactive compounds. For this purpose, Mastocarpus stellatus red seaweed was used as raw material and the most adequate MHG processing conditions were studied. The physicochemical properties of the algae and the corresponding biopolymers, the fundamental characterisation of the bioactive compounds from the extracts (antioxidant capacity, sulfate content, protein content, among others) and the rheological features of the formulated gels were analysed. Results indicated that MHG is an adequate technique for obtaining functional extracts with potential applications in the food and non-food fields. Hybrid carrageenans with a wide range of viscoelastic features were recovered by MHG, saving time compared to conventional methods. The yields obtained for the recovered hybrid carrageenans and bioactive fractions were comparable to those obtained in red algae with conventional techniques., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The production of extracellular polysaccharides (EPS) by haloarchaeal members, with novel and unusual physicochemical properties, is of special importance and has the potential for extensive biotechnological exploitation. An extremely halophilic archaeon, Haloferax sp. BKW301 (GenBank Accession No. KT240044) isolated from a solar saltern of Baksal, West Bengal, India has been optimized for the production of EPS under batch culture. It produced a considerable amount (5.95 g/L) of EPS in the medium for halophiles with 15% NaCl, 3% glucose, 0.5% yeast extract, and 6% inoculum under shake flask culture at 120 rpm. The purified EPS, a homopolymer of galactose as revealed by chromatographic methods and Fourier-transform infrared spectroscopy, is noncrystalline (CI xrd , 0.82), amorphous, and could emulsify hydrocarbons like kerosene, petrol, xylene, and so forth. Moreover, the polymer is highly thermostable (up to 420°C) and displayed pseudoplastic rheology. Biologically, the EPS was able to scavenge DPPH (2,2-diphenyl-1-picrylhydrazyl) radical efficiently and inhibit the proliferation of the Huh-7 cell line at an IC 50 value of 6.25 µg/ml with a Hill coefficient of 0.844. Large-scale production of this thermostable, pseudoplastic homopolysaccharide, therefore, could find suitable applications in industry and biotechnology., (© 2020 Wiley-VCH GmbH.)

On a worldwide scale, food demand is increasing as a consequence of global population growth. This makes companies push their food supply chains' limits with a consequent increase in generation of large amounts of untreated waste that are considered of no value to them. Biorefinery technologies offer a suitable alternative for obtaining high-value products by using unconventional raw materials, such as agro-industrial waste. Currently, most biorefineries aim to take advantage of specific residues (by either chemical, biotechnological, or physical treatments) provided by agro-industry in order to develop high-value products for either in-house use or for sale purposes. This article reviews the currently explored possibilities to apply biorefinery-known processes to banana agro-industrial waste in order to generate high-value products out of this residual biomass source. Firstly, the Central and Latin American context regarding biomass and banana residues is presented, followed by advantages of using banana residues as raw materials for the production of distinct biofuels, nanocellulose fibers, different bioplastics, and other high-value products Lastly, additional uses of banana biomass residues are presented, including energy generation and water treatment.

Objective: To evaluate the antitumor activity of the raw extract from biopolymers isolated from the Vibrio sp. marine bacteria in breast cancer induced by N-Methyl-N-nitrosourea (MNU) in rats., Materials and Methods: The Vibrio sp. marine bacteria was cultured for seven days, then the raw supernatant was filtered, precipitated and concentrated. MNU was administered in a single dose of 50 mg/kg to 39 Holtzman rats and were daily treated for 9 weeks orally: G1 (n = 13): 0.1 mL/100 g of saline solution; G2 (n = 13): 20 mg/kg of raw extract from Vibrio sp. biopolymers; G3 (n = 13): 100 mg/kg of tamoxifen; G4 (n = 11) received no MNU and only 0.1 mL/100 g of saline solution. Body weight and the appearance of breast tumors identified by palpation were assessed weekly, as well as histopathological examination at the end of treatment., Results: Seventy-seven percent of the rats in the G1 group developed tumors from week 7 onwards in an average of 2.2 tumors per animal; in contrast to the group treated with the raw biopolymer extract and tamoxifen; where only one rat (8%) in each group developed tumors after week nine of induction (p = 0.001). The histopathological results support that all the removed tumors correspond to breast ductal adenocarcinoma with different patterns: solid, papillary and cystic. Likewise, necrotic foci were evidenced in 30% of the tumors of the G1 group., Conclusion: The raw extract of biopolymers isolated from Vibrio sp. present antitumor effect in breast cancer induced in rats.

Chitins were extracted from large insect species of order Coleoptera (Lucanus cervus (Linnaeus, 1758) (Lucanidae) and Polyphylla fullo (Linnaeus, 1758) (Scarabaeidae) and order Orthoptera (Bradyporus (Callimenus) sureyai Ünal, 2011) (Tettigonidae) and Gryllotalpa gryllotalpa (Linnaeus, 1758) (Gryllotalpidae)) for the first time. Fourier Transform Infrared Spectrometry (FT-IR) confirms that isolation of chitin is successful. Yields of chitins on dry basis from P. fullo, L. cervus, G. gryllotalpa and B. (C.) sureyai are 11.3%, 10.9%, 10.1% and 9.8% respectively. Thermogravimetric Analysis (TGA) showed a variety of thermal stability of chitin samples from 614 °C to 748 °C with a small percent of ash. X-ray diffraction (XRD) data showed a crystallinity index percent from 80.6% to 85.2%. Scanning Electron Microscope (SEM) was examined for surface characterization determining as fibrous and porous for all species and changes from nm scales to μm scales. Elemental analysis has been applied to determine the elemental composition of chitin and nitrogen percent was relatively low for all specimens than expected. It is detected that examined insects have α-chitin form from XRD and FT-IR data. If these species can be grown in the laboratory, adults of them could be accepted as promising alternative chitin sources without negative effects on biodiversity., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Biopolymers derived from polysaccharides are a sustainable and environmentally friendly alternative to the synthetic counterparts available in the market. Due to their distinctive properties, the cyanobacterial extracellular polymeric substances (EPS), mainly composed of heteropolysaccharides, emerge as a valid alternative to address several biotechnological and biomedical challenges. Nevertheless, biotechnological/biomedical applications based on cyanobacterial EPS have only recently started to emerge. For the successful exploitation of cyanobacterial EPS, it is important to strategically design the polymers, either by genetic engineering of the producing strains or by chemical modification of the polymers. This requires a better understanding of the EPS biosynthetic pathways and their relationship with central metabolism, as well as to exploit the available polymer functionalization chemistries. Considering all this, we provide an overview of the characteristics and biological activities of cyanobacterial EPS, discuss the challenges and opportunities to improve the amount and/or characteristics of the polymers, and report the most relevant advances on the use of cyanobacterial EPS as scaffolds, coatings, and vehicles for drug delivery.

The on demand delivery of novel peptide actives, traditional pharmaceuticals, nutrients and/or vitamins is a ever present challenge due to the digestive and metabolic degradation of the active and the delivery vehicle. Biodegradable biopolymer hydrogels have long held promise as candidates for creating tailored release profiles due to the ability to control gel porosity. The present study describes the creation of novel hierarchical biopolymer hydrogels for the controlled release of lipids/lipophilic actives pharmaceutical ingredients (APIs), and mathematically describes the mechanisms that affect the timing of release. The creation of phase separated protein/polysaccharide core (6.6 wt% gelatin, 40 wt% Oil in water emulsion) shell structures (7 g/L xanthan with 70-140 g/L β-lactoglobulin) altered enzyme mass transport processes. This core shell structure enabled the creation of a tailorable burst release of API during gastrointestinal digestion where there is a delay in the onset of release, without affecting the kinetics of release. The timing of the delay could be readily programmed (with release of between 60 and 240 min) by controlling either the thickness or protein concentration (between 70 g/L and 140 g/L β-lactoglobulin) of the outer mixed biopolymer hydrogel shell (7 g/L xanthan with 70-140 g/L β-lactoglobulin). Enzyme diffusion measurements demonstrated that surface erosion was the main degradation mechanism. A kinetic model was created to describe the delayed burst release behaviour of APIs encapsulated within the core, and successfully predicted the influence of shell thickness and shell protein density on the timing of gastro-intestinal release (in vitro). Our work highlights the creation of a novel family of core-shell hydrogel oral dosage forms capable of programmable delivery of lipids/lipophilic APIs. These findings could have considerable implications for the delivery of peptides, poorly soluble drugs, or the programmed delivery of lipids within the gastrointestinal tract., (Copyright © 2019 Elsevier Inc. All rights reserved.)

The work is aimed at developing a numerical method for analysing mass spectra of deutero-substituted multicharged ions of biopolymers to determine contributions of components presumably corresponding to different biomolecule conformations. The two-dimensional decomposition of the H-D exchange mass spectra of two, three and four charged apamin ions with their separation suggests that the reaction of apamin ions with ND 3 molecules in the gas phase reveals hypothetically three different structural modifications of apamin ions. Usually for H-D exchange mass spectra, the presence of many resolvable protein structures was determined from measured distributions of peak intensities of ions with the same charge state. The method is new and has no published analogues. Graphical abstract.

Cancer is becoming a major reason for death troll worldwide due to the difficulty in finding an efficient, cost effective and target specific method of treatment or diagnosis. The variety of cancer therapy used in the present scenario have painful side effects, low effectiveness and high cost, which are some major drawbacks of the available therapies. Apart from the conventional cancer therapy, nanotechnology has grown extremely towards treating cancer. Nanotechnology is a promising area of science focusing on developing target specific drug delivery system for carrying small or large active molecules to diagnose and treat cancer cells. In the field of nanoscience, Chitosan nanopolymers (ChNPs) are been emerging as a potential carrier due to their biodegradability and biocompatibility. The easy modification and versatility in administration route of ChNPs has attracted attention of researchers towards loading chemicals, proteins and gene drugs for target specific therapy of cancer cells. Therefore, the present review deals with the growing concern towards cancer therapy, introduction of ChNPs, mode of action and other strategies employed by researchers till date towards cancer treatment and diagnosis ChNPs., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This objective of this work was to monitor the EPS production during the growth of Spirulina sp. LEB-18, evaluate the productivity and to characterize the exopolymers obtained on pilot-scale under outdoor conditions. The production of crude EPS occurred in all phases of biomass growth and was approximately ten folds higher than that biomass concentration of Spirulina sp. LEB-18 at the end cultivation, demonstrating the importance of the use of supernatant after harvesting of Spirulina to obtain high value bioproducts. The EPS extracted by Spirulina sp. LEB-18 are typically heteropolymers with one high molecular weight fraction (polysaccharides) with potential to be utilized as an alternative bioflocculant and another fraction of lower molecular mass (proteins). The presence of uronic acids, pyruvates and acyl groups of carbohydrates or carboxylic groups of amino acids in protein moiety is the main responsible for overall negative charge of EPS, which is also of biotechnological importance. Moreover, due to the pseudoplastic behavior of the solutions and high thermal stability, the obtained EPS can be widely applied in several industrial sectors, thus determining its technological and market potentiality., (Copyright © 2018 Elsevier B.V. All rights reserved.)

We have successfully conjugated mesalamine (5-aminosalicylic acid, 5-ASA) with xylan, a biopolymer isolated from pineapple stem waste, to form xylan-5-ASA conjugate. The biopolymer was used to provide colon-targeting properties for 5-ASA, a golden standard anti-inflammatory agent commonly used for ulcerative colitis treatment. A series of data from FTIR spectroscopy, UV-Vis spectrophotometry, and HPLC confirmed the xylan-5-ASA conjugate formation. To ensure successful colon targeting properties, in vitro and in vivo drug release studies after oral administration of xylan-5-ASA conjugate to Wistar rats were performed. Xylan-5-ASA conjugate was able to retain 5-ASA release in the upper gastrointestinal tract fluid simulation but rapidly released 5-ASA in the rat colon fluid simulation. In vivo release profile shows a very low peak plasma concentration, reached at 6 h after xylan-5-ASA conjugate administration. The delayed release and the lower bioavailability of 5-ASA from xylan-5-ASA conjugate administration compared to free 5-ASA administration confirmed the successful local colon delivery of 5-ASA using xylan-5-ASA conjugate. The administration of xylan-5-ASA conjugate also exhibited greater efficacy in recovering 2,4,6-trinitrobenzene sulfonic acid-induced colon ulcer compared to free 5-ASA administration. Taken together, xylan isolated from pineapple stem waste is promising to obtain colon targeting property for 5-ASA.

In recent years, along with the rapid development of relevant biological fields, there has been a tremendous motivation to combine molecular imprinting technology (MIT) with biosensing. In this situation, bioprobes and biosensors based on molecularly imprinted polymers (MIPs) have emerged as a reliable candidate for a comprehensive range of applications, from biomolecule detection to drug tracking. Unlike their precursors such as classic immunosensors based on antibody binding and natural receptor elements, MIPs create complementary cavities with stronger binding affinity, while their intrinsic artificial polymers facilitate their use in harsh environments. The major objective of this work is to review recent MIP bioprobes and biosensors, especially those used for biomolecules and drugs. In this review, MIP bioprobes and biosensors are categorized by sensing method, including optical sensing, electrochemical sensing, gravimetric sensing and magnetic sensing, respectively. The working mechanism(s) of each sensing method are thoroughly discussed. Moreover, this work aims to present the cutting-edge structures and modifiers offering higher properties and performances, and clearly point out recent efforts dedicated to introduce multi-sensing and multi-functional MIP bioprobes and biosensors applicable to interdisciplinary fields., Competing Interests: The authors declare no conflict of interest.

Sporopollenin is a ubiquitous and extremely chemically inert biopolymer that constitutes the outer wall of all land-plant spores and pollen grains 1 . Sporopollenin protects the vulnerable plant gametes against a wide range of environmental assaults, and is considered a prerequisite for the migration of early plants onto land 2 . Despite its importance, the chemical structure of plant sporopollenin has remained elusive 1 . Using a newly developed thioacidolysis degradative method together with state-of-the-art solid-state NMR techniques, we determined the detailed molecular structure of pine sporopollenin. We show that pine sporopollenin is primarily composed of aliphatic-polyketide-derived polyvinyl alcohol units and 7-O-p-coumaroylated C16 aliphatic units, crosslinked through a distinctive dioxane moiety featuring an acetal. Naringenin was also identified as a minor component of pine sporopollenin. This discovery answers the long-standing question about the chemical make-up of plant sporopollenin, laying the foundation for future investigations of sporopollenin biosynthesis and for the design of new biomimetic polymers with desirable inert properties.

Role of microorganisms in induction of/protection from autoimmune diseases is proven though molecular mechanisms and bacterial/viral/yeast biopolymers responsible for these effects are in the research stage. Autoantobodies (AAbs) to thyroid peroxidase (anti-TPO) and thyroglobulin (anti-Tg) as well as AAbs to transglutaminase 2 (anti-TG2) and antibodies to gliadins (anti-gliadins) are serological markers of autoimmune thyroid disease and celiac disease, respectively, and players in pathogenesis of these autoimmune diseases. In current study, biopolymer of Bifidobacterium bifidum BIM В-733D that interacts selectively with anti-gliadins (Bb-G anti-gliadins ) was isolated by affinity chromatography with anti-gliadins, purified by size exclusion chromatography on TSK 40 gel and identified by NMR as linear α-(1 → 6)-d-glucan with molecular mass about 5000 Da. It was proven that compounds Bb-G anti-gliadins and Bb-G anti-TPO /Bb-G anti-Tg isolated early from the same strain [Kiseleva, E. P. et al., Benef Microbes.2013, 4, 375 -391] are the same substance designated G Bb . Its unique immunochemical property is the ability to interact selectively with anti-TPO, anti-Tg, anti-TG2 and anti-gliadins in presence of no less than 10-fold excess of total immunoglobulins of class G (tIgG), as it was proven by ELISA. Synthesis of G Bb -bovine serum albumin (G Bb -BSA) conjugate is an example of increasing the reliability and reproducibility of ELISA results by mediated immobilization of a polysaccharide covalently attached to a well-adsorbed protein. Taking into account that there are population of bispecific anti-gliadins (anti-gliadins and anti-TG2 simultaneously) we regard our data as first argument in favor of hypothesis that G Bb differentiates between human AAbs per se and other human Ig (e.g. antibodies to antigens of infectious agents) due to its binding with a yet unidentified site which is present in the molecules of all AAbs (independently on their specificity) and absent in other human Igs., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The reuse of waste as well as the production of biodegradable compounds has for years been the object of studies and of global interest as a way to reduce the environmental impact generated by unsustainable exploratory processes. The conversion of linear processes into cyclical processes has environmental and economic advantages, reducing waste deposition and reducing costs. The objective of this work was to use biopolymer extraction waste in the cultivation of Spirulina sp. LEB 18, for the cyclic process of polyhydroxybutyrate (PHB) synthesis. Concentrations of 10, 15, 20, 25, and 30% (v/v) of biopolymer extraction waste were tested. For comparison, two assays were used without addition of waste, Zarrouk (SZ) and modified Zarrouk (ZM), with reduction of nitrogen. The assays were carried out in triplicate and evaluated for the production of microalgal biomass and PHB. The tests with addition of waste presented a biomass production statistically equal to ZM (0.79 g L -1 ) (p < 0.1). The production of PHB in the assay containing 25% of waste was higher when compared to the other cultivations, obtaining 10.6% (w/w) of biopolymer. From the results obtained, it is affirmed that the use of PHB extraction waste in the microalgal cultivation, aiming at the synthesis of biopolymers, can occur in a cyclic process, reducing process costs and the deposition of waste, thus favoring the preservation of the environment.

Nucleophosmin (NPM1) is a multifunctional phosphoprotein which plays important roles in diverse biological processes. NPM1 can form homo- or hetero-oligomers through its N-terminal region, and bind DNA and RNA through its C-terminal region. However, the monomer-oligomer distribution of NPM1, and the extent of NPM1 binding and unbinding to RNA in living cells, are not fully understood. In this work, we analysed molecular complexes of NPM1 using size exclusion chromatography. We found that a substantial fraction of NPM1 behaves as an oligomer in HeLa cells. Furthermore, we identified three distinct oligomeric states of NPM1 using molecular characterization techniques such as subcellular localization and RNA binding. Finally, we found that heterozygous expression of a leukemia-associated NPM1 mutant significantly decreases the RNA binding level. Our data demonstrate that size exclusion chromatography provides a powerful tool for analysing NPM1 oligomers.

The aim of the present work was to experimentally evaluate an alternative advanced wastewater treatment system, which combines the action of photocatalytic oxidation with ceramic membrane filtration. Experiments were carried out using laboratory scale TiO 2 /UV photocatalytic reactor and tubular ceramic microfiltration (CMF) system to treat the secondary effluent (SE). A 100-nm pore size CMF membrane was investigated in cross flow mode under constant transmembrane pressure of 20 kPa. The results show that specific flux decline of CMF membrane with and without TiO 2 /UV photocatalytic treatment was 30 and 50%, respectively, after 60 min of filtration. Data evaluation revealed that the adsorption of organic compounds onto the TiO 2 particles was dependent on the pH of the suspension and was considerably higher at low pH. The liquid chromatography-organic carbon detector (LC-OCD) technique was used to characterise the dissolved organic matter (DOM) present in the SE and was monitored following photocatalysis and CMF. The results showed that there was no removal of biopolymers and slight removal of humics, building blocks and the other oxidation by-products after TiO 2 /UV photocatalytic treatment. This result suggested that the various ions present in the SE act as scavengers, which considerably decrease the efficiency of the photocatalytic oxidation reactions. On the other hand, the CMF was effective for removing 50% of biopolymers with no further removal of other organic components after photocatalytic treatment. Thus, the quantity of biopolymers in SE has an apparent correlation with the filterability of water samples in CMF.

Sporopollenin is a promising material for drug encapsulation due to its excellent properties; uniformity in size, non-toxicity, chemically and thermally resilient nature. Herein, morphologically intact sporopollenin microcapsules were extracted from Betula pendula pollens. Cancer therapeutic agent (imatinib mesylate) was loaded into the microcapsules. The encapsulation efficiency by passive loading technique was found to be 21.46%. Release behaviour of the drug from microcapsules was found to be biphasic, with an initial fast release followed by a slower rate of release. Imatinib mesylate release from the drug itself (control) was faster than from imatinib mesylate-loaded sporopollenin microcapsules. The release profiles for both free and entrapped drug samples were significantly slower and more controlled in PBS buffer (pH 7.4) than in HCl (pH 1.2) buffer. Cumulative drug release from IM-MES-loaded sporopollenin microcapsules was found to be 65% within 24h for PBS, whereas release from the control was completed within 1h. Also, a complete dissolution of control in HCl buffer was observed within first 30min. MTT assay revealed that drug-loaded microcapsules were effective on WiDr human colon carcinoma cell line. B. pendula sporopollenin can be suggested as an effective carrier for oral delivery of imatinib mesylate., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The experiences in the production and application of polymethacrylate-based monolithic supports, since their development almost thirty years ago, are presented. The main driving force for the development of new chromatographic supports was the necessity for the isolation and separation of physiologically active biopolymers and their use for therapeutic purposes. For this sake, a development of a method for fast separation, preventing denaturation and preserving their biological activity was necessary. Development of polysaccharide-based supports, followed by the introduction of polymer-based chromatographic media, is shortly described. This development was followed by the advances in monolithic media that are now used for both large- and small-scale separation of biopolymers and nanoparticles. Finally, a short overview is given about the applications of monoliths for sample displacement chromatography, resulting in isolation of physiologically active biomolecules, such as proteins, protein complexes, and nucleic acid, as well as high-throughput sample preparation for proteomic investigations., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work, two bioflocculants, namely, EB-EPS and B1-EPS, were derived from Enterobacter sp. and Bacillus sp., respectively, and analyzed with regard to their production and characterization. About 0.9 and 0.16 g of purified EB and B1 were obtained from I L of fermentation broth. Chemical analysis showed the contents of purified EB and B1 mainly as 88.7 and 92.8% (w/w) of carbohydrate, and 11.3 and 21.8% (w/w) protein, respectively. Fourier-transform infrared spectrometry analysis revealed the presence of hydroxyl, amide, and carboxyl groups in the identified bioflocculant. Thermogravimetric analysis (TGA) results exhibited enhanced thermal stability with a minimum mass loss of 50% while 25% were found to have occurred at higher temperatures (>400°C) for microbe-derived compounds EB and B1 leading to the possibility of using these compounds as fillers or for fabricating composite films for high-temperature applications. Further, the compounds from both the bacteria exhibited good antibacterial characteristics against pathogenic Escherichia coli. Degradability study of bioflocculant-embedded composite films shows the possibility of attaining eco-friendly bioremediation. Accordingly, experimental results revealed the suitability of developed composite films as a suitable alternative for food packaging and biomedical applications.

Here, we describe the properties of a prototype microcentrifuge tube made from the plastic cyclic olefin polymer (COP). This material has been used in the manufacture of primary containers including syringes and vials for the storage, shipment, and delivery of biotherapeutics, vaccines, and cell therapy products. Its low level of extractable substances and metals along with its glass-like clarity make COP an attractive material for the fabrication of microcentrifuge tubes and other consumable laboratory plasticware where contamination is an important consideration, such as in the storage and analysis of labile proteins, nucleic acids, and metabolites. We compare the performance of microcentrifuge tubes made of COP with that of several brands made of polypropylene (PP), the plastic most widely used in the manufacture of microcentrifuge tubes. Our results show COP microcentrifuge tubes perform as well as tubes made of PP, with reduced levels of compounds capable of leaching into solvents typically used in the laboratory.

Bio-based catalyst support materials with high thermal and structural stability are desired for catalysts systems requiring harsh conditions. In this study, a thermally stable palladium catalyst (up to 440°C) was designed from sporopollenin, which occurs naturally in the outer exine layer of pollens and is widely acknowledged as chemically very stable and inert biological material. Catalyst design procedure included (1) extraction of sporopollenin microcapsules from Betula pendula pollens (∼25μm), (2) amino-functionalisation of the microcapsules, (3) Schiff base modification and (4) preparation of Pd(II) catalyst. The catalytic activity of the sporopollenin microcapsule supported palladium catalyst was tested in catalysis of biaryls by following a fast, simple and green microwave-assisted method. We recorded outstanding turnover number (TON: 40,000) and frequency (TOF: 400,000) for the catalyst in Suzuki coupling reactions. The catalyst proved to be reusable at least in eight cycles. The catalyst can be suggested for different catalyst systems due to its thermal and structural durability, reusability, inertness to air and its eco-friendly nature., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Extracellular polymeric substances (EPS) play crucial roles in bio-aggregate formation and survival of bacterial cells. To develop an effective but harmless method for EPS extraction from Shewanella oneidensis MR-1, five extraction methods, i.e. centrifugation (control), heating (40, 45, 50, and 60 °C), and treatments with H 2 SO 4 , ethylenediaminetetraacetic acid (EDTA) and NaOH, were examined, respectively. Results from scanning electron microscope and flow cytometric analyses indicate that MR-1 cells were severely broken by H 2 SO 4 , NaOH and heating temperature ≥45 °C. Proteins and polysaccharides in EPS extracted by heating at 40 °C were 7.12 and 1.60 mg g -1 dry cell, respectively. Although EDTA treatment had a relatively lower yield of EPS (proteins and polysaccharides yields of 5.15 and 1.30 mg g -1 dry cell, respectively), cell lysis was barely found after EPS extraction. Three peaks were identified from the three-dimensional excitation-emission matrix spectrum of each EPS sample, suggesting the presence of protein-like substances. Furthermore, the peak intensity was in good accordance with protein concentration measured by the chemical analysis. In short, heating (40 °C) and EDTA treatments were found the most suitable methods for EPS extraction considering the cell lysis and EPS content, composition and functional groups together.

Biomedical applications ranging from tissue engineering to drug delivery systems require versatile biomaterials based on the scalable and tunable production of biopolymer nanofibers under physiological conditions. These requirements can be successfully met by a novel extrusion process through nanoporous aluminum oxide templates, which is presented in this study. With this simple method we are able to control the nanofiber diameter by chosing the size of the nanopores and the concentration of the biopolymer feed solution. Nanofiber assembly into different hierarchical fiber arrangements can be achieved with a wide variety of different proteins ranging from the intracellular proteins actin, α-actinin and myosin to the extracellular matrix components collagen, fibronectin, fibrinogen, elastin and laminin. The extrusion of nanofibers can even be applied to the polysaccharides hyaluronan, chitosan and chondroitin sulphate. Moreover, blends of different proteins or proteins and polysaccharides can be extruded into composite nanofibers. With these features our template-assisted extrusion process will lead to new avenues in the development of nanofibrous biomaterials.

There is considerable interest in developing microscale (i.e., high-throughput) methods that enable multiple filtration experiments to be run in parallel with smaller sample amounts and thus reduce the overall required time and associated cost to run the filtration tests. Previous studies to date have focused on simply evaluating the filtration capacity, not the separation performance. In this work, the stirred-well filtration (SWF) method was used in combination with design-of-experiment (DOE) methods to optimize the separation performance for three binary mixtures of bio-molecules: protein-protein, protein-polysaccharide, and protein-DNA. Using the parallel based format of the SWF method, eight constant-flux ultrafiltration experiments were conducted at once to study the effects of stirring conditions, permeate flux, and/or solution conditions (pH, ionic strength). Four separate filtration tests were conducted for each combination of process variables; in total, over 100 separate tests were conducted. The sieving coefficient and selectivity results are presented to match the DOE design format and enable a greater understanding of the effects of the different process variables that were studied. The method described herein can be used to rapidly determine the optimal combination of process factors that give the best separation performance for a range of membrane-based separations applications and thus obviate the need to run a large number of traditional lab-scale tests. Biotechnol. Bioeng. 2016;113: 2131-2139. © 2016 Wiley Periodicals, Inc., (© 2016 Wiley Periodicals, Inc.)

Tightly bound extracellular polymeric substances (TB-EPS) are important components of sludge, playing a crucial role in the behavior of activated sludge. They are located in the innermost layer of EPS which closely combine with the cell surface and are difficult to be extracted. To fully understand the role of TB-EPS, it is extremely important to find an appropriate TB-EPS extraction protocol, which provides maximum yields of TB-EPS under the premise of minimal contribution of cell lysis. Ultrasonic method has been widely applied for TB-EPS extraction due to its unique advantages, but no one has developed a systematic and scientifically optimized method for this protocol. In this study, a novel method based on response surface methodology (RSM) was successfully developed to optimize the conditions of TB-EPS extraction. The optimal conditions were determined at an ultrasound time of 1.00 min, ultrasonic density of 5.59 W/mL and a mixed liquor suspended solid (MLSS) of around 1700-1800 mg/L. Furthermore, combined analysis of microscopy, particle size, and excitation-emission matrix (EEM) was successfully applied to evaluate the optimal conditions. The result indicates that the optimal conditions are efficient, reliable, and reproducible which effectively solves the bottleneck problem of the conflict between cell viability and TB-EPS yield, and little effect on its chemical structure.

The goal of this study was to investigate the role of ethanol and temperature on the hydroxyl and carbonyl groups in biopolyol produced from hydrothermal liquefaction of loblolly pine (Pinus spp.) carried out at 250, 300, 350 and 390°C for 30min. Water and water/ethanol mixture (1/1, wt/wt) were used as liquefying solvent in the HTL experiments. HTL in water and water/ethanol is donated as W-HTL and W/E-HTL, respectively. It was found that 300°C and water/ethanol solvent was the optimum liquefaction temperature and solvent, yielding up to 68.1wt.% bio-oil and 2.4wt.% solid residue. (31)P-NMR analysis showed that biopolyol produced by W-HTL was rich in phenolic OH while W/E-HTL produced more aliphatic OH rich biopolyols. Moreover, biopolyols with higher hydroxyl concentration were produced by W/E-HTL. Carbonyl groups were analyzed by (19)F-NMR, which showed that ethanol reduced the concentration of carbonyl groups., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A water soluble humic acid and melanin-like polymer complex (OMWW-ASP) was isolated from olive mill waste waters (OMWW) by ammonium sulfate fractionation to be used as natural additive in food preparations. The dark polymer complex was further characterized by a variety of biochemical, physicochemical and spectroscopic techniques. OMWW-ASP is composed mainly of proteins associated with polyphenols and carbohydrates and the distribution of its relative molecular size was determined between about 5 and 190 kDa. SDS-PAGE shows the presence of a well separated protein band of 21.3 kDa and a low molecular weight peptide. The OMWW-ASP complex exhibits a monotonically increasing UV-Vis absorption spectrum and it contains stable radicals. Antioxidant activity measurements reveal the ability of the OMWW protein fraction to scavenge both the cationic 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS(+)) radical, as well as the stable nitroxide free radical 4-hydroxy-2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPOL)., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This work demonstrates a significant advance in bioprocessing for a high-melting lipid polymer. A novel and environmental friendly solvent mixture, acetone/ethanol/propylene carbonate (A/E/P, 1:1:1 v/v/v) was identified for extracting poly-hydroxybutyrate (PHB), a high-value biopolymer, from Cupriavidus necator. A set of solubility curves of PHB in various solvents was established. PHB recovery of 85% and purity of 92% were obtained from defatted dry biomass (DDB) using A/E/P. This solvent mixture is compatible with water, and from non-defatted wet biomass, PHB recovery of 83% and purity of 90% were achieved. Water and hexane were evaluated as anti-solvents to assist PHB precipitation, and hexane improved recovery of PHB from biomass to 92% and the purity to 93%. A scale-up extraction and separation reactor was designed, built and successfully tested. Properties of PHB recovered were not significantly affected by the extraction solvent and conditions, as shown by average molecular weight (1.4 × 10(6) ) and melting point (175.2°C) not being different from PHB extracted using chloroform. Therefore, this biorenewable solvent system was effective and versatile for extracting PHB biopolymers. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:678-685, 2016., (© 2016 American Institute of Chemical Engineers.)

In this study, extracellular polymeric substances of Aphanizomenon flos-aquae (EPS-A) were investigated in order to explore their effect on astrocytes of zebrafish and potential risk for environment. Astrocytes were treated with varying concentrations of EPS-A, the results showed that EPS-A inhibited astrocytes growth in a dose-and time-dependent manner. With the concentrations of EPS-A increasing, the adherent ability of astrocytes decreased and the number of astrocytes floating in the culture medium increased. When treated with 2.35 µg/mL EPS-A, EPS-A induced cell cycle arrest and made the collapse of mitochondrial membrane potential and then led to astrocytes apoptosis. The results suggested that EPS-A could pose a threat to zebrafish and represent risk for environment, so regularly monitoring the presence of EPS-A was very important in nutrient-rich freshwaters when A. flos-aquae blooms broke out.

Background: With the increased number of cholera outbreaks and emergence of multidrug resistance in Vibrio cholerae strains it has become necessary for the scientific community to devise and develop novel therapeutic approaches against cholera. Recent studies have indicated plausibility of therapeutic application of metal nano-materials. Among these, silver nanoparticles (AgNPs) have emerged as a potential antimicrobial agent to combat infectious diseases. At present nanoparticles are mostly produced using physical or chemical techniques which are toxic and hazardous. Thus exploitation of microbial systems could be a green eco-friendly approach for the synthesis of nanoparticles having similar or even better antimicrobial activity and biocompatibility. Hence, it would be worth to explore the possibility of utilization of microbial silver nanoparticles and their conjugates as potential novel therapeutic agent against infectious diseases like cholera., Results: The present study attempted utilization of Ochrobactrum rhizosphaerae for the production of AgNPs and focused on investigating their role as antimicrobial agents against cholera. Later the exopolymer, purified from the culture supernatant, was used for the synthesis of spherical shaped AgNPs of around 10 nm size. Further the exopolymer was characterized as glycolipoprotein (GLP). Antibacterial activity of the novel GLP-AgNPs conjugate was evaluated by minimum inhibitory concentration, XTT reduction assay, scanning electron microscopy (SEM) and growth curve analysis. SEM studies revealed that AgNPs treatment resulted in intracellular contents leakage and cell lysis., Conclusion: The potential of microbially synthesized nanoparticles, as novel therapeutic agents, is still relatively less explored. In fact, the present study first time demonstrated that a glycolipoprotein secreted by the O. rhizosphaerae strain can be exploited for production of AgNPs which can further be employed to treat infectious diseases. Although this type of polymer has been obtained earlier from marine fungi and bacteria, none of these reports have studied the role of this polymer in AgNPs synthesis and its application in cholera therapy. Interestingly, the microbial GLP-capped AgNPs exhibited antibacterial activity against V. cholerae comparable to ciprofloxacin. Thus the present study may open up new avenues for development of novel therapeutic agents for treatment of infectious diseases. Graphical abstract Development of novel therapeutic agents for treatment of cholera.

Marine biopolymers have been explored as a promising cell therapy system for efficient cell delivery and tissue engineering. However, the marine biomaterial-based systems themselves have exhibited limited performance in terms of maintenance of cell viability and functions, promotion of cell proliferation and differentiation as well as cell delivery efficiency. Thus, numerous novel strategies have been devised to improve cell therapy outcomes. The strategies include optimization of physical and biochemical properties, provision of stimuli-responsive functions, and design of platforms for efficient cell delivery and tissue engineering. These approaches have demonstrated substantial improvement of therapeutic outcomes in a variety of research settings. In this review, therefore, research progress made with marine biomaterials as a platform for cell therapy is reported along with current research directions to further advance cell therapies as a tool to cure incurable diseases.

A novel scheme was developed for the treatment of municipal wastewater integrating nitritation/denitritation with the selection of polyhydroxyalkanoates (PHA) storing biomass under an aerobic/anoxic, feast/famine regime. The process took place in a sequencing batch reactor (SBR) and the subsequent PHA accumulation in a batch reactor. The carbon source added during the selection and accumulation steps consisted of fermentation liquid from the organic fraction of municipal solids waste (OFMSW FL) (Period I) and OFMSW and primary sludge fermentation liquid (Period II). Selection of PHA storing biomass was successful and denitritation was driven by internally stored PHA during the famine phase. Under optimum conditions of SBR operation ammonia removal was 93%, reaching a maximum nitrite removal of 98%. The treated effluent met the nitrogen limits, while PHA-storing biomass was successfully selected. The maximum accumulation of PHA was 10.6% (wt.) since the nutrients present in the carbon source promoted bacterial growth., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The chemical compositions of the surface conditioning layers formed by different types of solutions (from isolated EPS to whole culture media), involving different bacterial strains relevant for biocorrosion were compared, as they may influence the initial step in biofilm formation. Different substrata (polystyrene, glass, steel) were conditioned and analyzed by X-ray photoelectron spectroscopy. Peak decomposition and assignment were validated by correlations between independent spectral data and the ubiquitous presence of organic contaminants on inorganic substrata was taken into account. Proteins or peptides were found to be a major constituent of all conditioning layers and polysaccharides were not present in appreciable concentrations; the proportion of nitrogen which may be due to DNA was lower than 15%. There was no significant difference between the compositions of the adlayers formed from different conditioning solutions, except for the adlayers produced with tightly bound EPS extracted from D. alaskensis.

Sphingans and poly(R-3-hydroxybutyrate) (PHB) are both widely used biopolymers produced by bacteria. In the batch fermentation of Sphingomonas sanxanigenens NX02 in a 5L fermenter using glucose as carbon source, ivory colored sphingan Ss production was a growth-associated process with a maximum purified production of 14.88 ± 0.83 g/L, while 6.08 ± 0.23 g/L PHB was simultaneously produced. Sphingan Ss and PHB were separated by a simple dilution, heating and centrifugation or filtration process, and sphingan Ss can be cost-effectively extracted using a small amount of acid rather than multi-fold volumes of alcohols. From ultrathin sections of S. sanxanigenens NX02, we found that the interior space of the cells was filled with PHB granules, and the outside was surrounded by abundant Ss. The purified sphingan Ss can be used as an excellent gelling and emulsifying agent in biotechnology applications such as food, personal care and production processes. Proposed pathways of Ss and PHB biosynthesis from glucose are also presented., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Olive oil deodorizer distillate (OODD) was used for the first time as the sole substrate for polyhydroxyalkanoates (PHA) production by the bacterium Pseudomonas resinovorans in bioreactor cultivation. A PHA content in the biomass of 36 ± 0.8 wt% was attained within 19 h of cultivation. A final polymer concentration of 4.7 ± 0.3 gL(-1) was reached, corresponding to a volumetric productivity of 5.9 ± 0.2 gL(-1)day(-1). The PHA was composed of 3-hydroxyoctanoate (48.3 ± 7.3 mol%), 3-hydroxydecanoate (31.6 ± 2.6 mol%), 3-hydroxyhexanoate (12.1 ± 1.1 mol%) and 3-hydroxydodecanoate (8.0 ± 0.7 mol%) and it had a glue-like consistency that did not solidify at room temperature. The polymer was highly amorphous, as shown by its low crystallinity of 6 ± 0.2%, with low melting and glass transition temperatures of 36 ± 1.2 and -16 ± 0.8°C, respectively. The polymer exhibited a shear thinning behavior and a mechanical spectrum with a predominant viscous contribution. Its shear bond strength for wood (67 ± 9.4 kPa) and glass (65 ± 7.3 kPa) suggests it may be used for the development of biobased glues., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A laboratory-scale membrane bioreactor (MBR) combined with ultraviolet (UV) disinfection and granular activated carbon (GAC) adsorption was researched for over seven months to evaluate the removal efficiencies and mechanisms of a moderately persistent s-triazine herbicide (Ametryn), which is commonly used in Australian sugarcane farmlands. Long-term experiments showed that MBR alone (15h hydraulic retention time (HRT)) can remove 65% of Ametryn from its influent which had a concentration of 1-2mg/L. A batch study was carried out to assess the mechanisms of removal of Ametryn through MBR and found that 0.1186mg of Ametryn/g-VSS is adsorbed onto sludge particles when 1mg/L of Ametryn is added to the mixed liquor and showed a 64% removal after 12h. This experiment confirmed that 99%, 92% and 83% removal of Ametryn could be achieved only from biodegradation, if the MBR maintains a HRT of 7.5, 2.5 and 1.5days respectively., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Many neurodegenerative diseases are associated with deposits of aggregated protein in the brain. The molecular pathways through which soluble proteins misfold to form amyloids and large protein aggregates often include diverse oligomeric species, only some of which progress to the amyloid state. Here we show that prefibrillar huntingtin (HTT) oligomers, isolated from Huntington's disease (HD) affected human brain samples or mouse models, stimulate polyglutamine amyloid formation. Fibrillar HTT oligomers have been shown to be unstable under denaturing conditions and appear not to lead to amyloid formation. Here we show that prefibrillar HTT oligomers are remarkably stable and are potent seeds of polyglutamine amyloid formation. Therefore, our findings help to dissect the complex molecular pathway of HTT misfolding., (Copyright © 2015 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.)

Cultured pearls are the product of grafting and rearing of Pinctada margaritifera pearl oysters in their natural environment. Nucleus rejections and oyster mortality appear to result from bacterial infections or from an inappropriate grafting practice. To reduce the impact of bacterial infections, synthetic antibiotics have been applied during the grafting practice. However, the use of such antibiotics presents a number of problems associated with their incomplete biodegradability, limited efficacy in some cases, and an increased risk of selecting for antimicrobial resistant bacteria. We investigated the application of a marine antimicrobial peptide, tachyplesin, which is present in the Japanese horseshoe crab Tachypleus tridentatus, in combination with two marine bacterial exopolymers as alternative treatment agents. In field studies, the combination treatment resulted in a significant reduction in graft failures vs. untreated controls. The combination of tachyplesin (73 mg/L) with two bacterial exopolysaccharides (0.5% w/w) acting as filming agents, reduces graft-associated bacterial contamination. The survival data were similar to that reported for antibiotic treatments. These data suggest that non-antibiotic treatments of pearl oysters may provide an effective means of improving oyster survival following grafting procedures.