Search

Calcium phosphate nanoparticles (60 nm) were stabilized with either polyethyleneimine (PEI; polycationic electrolyte) or carboxymethylcellulose (CMC; polyanionic electrolyte). Next, a silica shell was added and terminated with either azide or alkyne groups via siloxane coupling chemistry. The particles were covalently functionalized by copper-catalyzed azide-alkyne cycloaddition (CuAAC; click chemistry) with proteins or gold nanoparticles that carried the complementary group, i.e., either alkyne or azide. The model proteins hemoglobin and bovine serum albumin (BSA) were attached as well as ultrasmall gold nanoparticles (2 nm). The number of protein molecules and gold nanoparticles attached to each calcium phosphate nanoparticle was quantitatively determined by extensive fluorescent labelling and UV–Vis spectroscopy on positively (PEI) or negatively (CMC) charged calcium phosphate nanoparticles, respectively. Depending on the cargo and the nanoparticle charge, this number was in the range of several hundreds to thousands. The functionalized calcium phosphate particles were well dispersible in water as shown by dynamic light scattering and internally amorphous as shown by X-ray powder diffraction. They were easily taken up by HeLa cells and not cytotoxic. This demonstrates that the covalent surface functionalization of calcium phosphate nanoparticles is a versatile method to create transporters with firmly attached cargo molecules into cells.

The analysis of complex samples is a big analytical challenge due to the vast number of compounds present in these samples as well as the influence matrix components could cause in the methodology. In this way, comprehensive two-dimensional gas chromatography coupled to mass spectrometry (GC × GC–MS) is a very powerful tool to achieve the characterization of complex samples. Nevertheless, due to possible coelutions occurring in these matrices, mixed spectra are generally obtained with electron ionization (EI) which could extremely complicate the identification of the analytes. Thereby, new methodology setups are required to improve the confidence on the identification in non-targeted determinations. Here, we present a high-throughput methodology consisting of GC × GC with flow modulation coupled to high-resolution atmospheric pressure mass spectrometry (HRMS) via a novel tube plasma ion source (TPI). The flow modulator allows to easily automate the GC × GC method compared to traditional cryo-modulators, while the soft ionization provided by TPI helps to preserve the [M]+• or [M+H]+ ions, thus increasing the confidence in the identification. Additionally, the combination of a flow modulation with an atmospheric pressure mass spectrometer significantly improves the sensitivity over flow modulated GC × GC-EI-MS methods because no split is required. This methodology was applied to the analysis of a complex sample such as vermouth where the volatile profile is usually considered by consumers as a product quality indicator since it raises the first sensations produced during its consumption. Using this approach, different classes of compounds were tentatively identified in the sample, including monoterpenes, terpenoids, sesquiterpenoids and carboxylic acid, and carboxylate esters among others, showing the great potential of a GC × GC-TPI-qTOF-MS platform for improving the confidence of the identifications in non-targeted applications.

For various reasons, students receive less formative feedback at post-secondary institutions compared to secondary school. Considering feedback as one of the most important influencing factors on learning processes, formative feedback is a promising approach to improving students’ performances. In this context, new technologies, such as learning management systems (LMS) or intelligent tutoring systems (ITS), can make a valuable contribution to improving higher education teaching by providing automated and individualized error-specific just-in-time (JIT) feedback. However, the digitalization especially of paper-based open-ended tasks that can be used by LMS is currently still associated with a loss of quality. In this paper, we present an approach that allows us to transfer open-ended paper-based tasks in the field of chemistry into online tasks without losing quality and provide large university courses with automated and individualized error-specific JIT feedback. Results of a study of 238 first-year chemistry students reveal that the automated individualized error-specific JIT feedback had a significant positive influence on students’ performance.

Aromatic amines (AA) are carcinogenic compounds that can enter the human body through many sources, one of the most important being tobacco smoke. They are excreted with the urine, from which they can be extracted and measured. To that end, hollow fiber-liquid-phase microextraction (HF-LPME) and parallel artificial liquid membrane extraction (PALME) were optimized for the analysis of representative aromatic amines, as alternatives to liquid–liquid extraction (LLE). Relevant extraction parameters, namely organic solvent, extraction time, agitation speed, and acceptor solution pH, were studied, and the two optimized techniques—HF-LPME: dihexyl ether, 45 min, 250 rpm, and pH 1; PALME: undecane, 20 min, 250 rpm and pH 1—were compared. Comparison of the optimized methods showed that significantly higher recoveries could be obtained with PALME than with HF-LPME. Therefore, PALME was further validated. The results were successful for nine different AA, with regression coefficients (R2) of at least 0.991, limits of detection (LOD) of 45–75 ng/L, and repeatability and peak area relative standard deviations (RSD) below 20%. Furthermore, two urine samples from smokers were measured as proof of concept, and 2-methylaniline was successfully quantified in one of them. These results show that PALME is a great green alternative to LLE. Not only does it use much smaller volumes of toxic organic solvents, and sample—enabling the study of samples with limited available volumes—but it is also less time consuming and labor intensive, and it can be automated. Graphical Abstract

Membrane science and technology is growing rapidly worldwide and continues to play an increasingly important role in diverse fields by offering high separation efficiency with low energy consumption. Membranes have also shown great promise for “green” separation. A majority of the investigations in the field are devoted to the membrane fabrication and modification with the ultimate goals of enhancing the properties and separation performance of membranes. However, less attention has been paid to membrane life cycle management, particularly at the end of service. This is becoming very important, especially taking into account the trends toward sustainable development and carbon neutrality. On the contrary, this can be a great opportunity considering the large variety of membrane processes, especially in terms of the size and capacity of plants in operation. This work aims to highlight the prominent aspects that govern membrane life cycle management with special attention to life cycle assessment (LCA). While fabrication, application, and recycling are the three key aspects of LCA, we focus here on membrane (module) recycling at the end of life by elucidating the relevant aspects, potential criteria, and strategies that effectively contribute to the achievement of green development and sustainability goals.

In the last decade, trends for competing electrocatalytic processes have been largely captured by volcano plots, which can be constructed by the analysis of adsorption free energies as derived from electronic structure theory in the density functional theory approximation. One prototypical example refers to the four-electron and two-electron oxygen reduction reactions (ORRs), resulting in the formation of water and hydrogen peroxide, respectively. The conventional thermodynamic volcano curve illustrates that the four-electron and two-electron ORRs reveal the same slopes at the volcano legs. This finding is related to two facts, namely, that only a single mechanistic description is considered in the model, and electrocatalytic activity is assessed by the concept of the limiting potential, a simple thermodynamic descriptor evaluated at the equilibrium potential. In the present contribution, the selectivity challenge of the four-electron and two-electron ORRs is analyzed, thereby accounting for two major expansions. First, different reaction mechanisms are included into the analysis, and second, Gmₐₓ(U), a potential-dependent activity measure that factors overpotential and kinetic effects into the evaluation of adsorption free energies, is applied for approximation of electrocatalytic activity. It is illustrated that the slope of the four-electron ORR is not constant at the volcano legs but rather is prone to change as soon as another mechanistic pathway is energetically preferred or another elementary step becomes the limiting one. Due to the varying slope of the four-electron ORR volcano, a trade-off between activity and selectivity for hydrogen peroxide formation is observed. It is demonstrated that the two-electron ORR is energetically preferred at the left and right volcano legs, thus opening a new strategy for the selective formation of H₂O₂ by an environmentally benign route. CA Exner

Abstract Diclofenac, ibuprofen, and carbamazepine are three of the most widely detected and most concerning pharmaceutical residues in aquatic ecosystems. The aim of this study was to identify bacteria that may be involved in their degradation from a bacterial biofilm. Selective enrichment cultures in mineral salt solution containing pharmaceutical compounds as sole source of carbon and energy were set up, and population dynamics were monitored using shotgun metagenome sequencing. Bacterial genomes were reconstructed using genome-resolved metagenomics. Thirty bacterial isolates were obtained, identified at species level, and tested regarding pharmaceutical biodegradation at an initial concentration of 1.5 mg l−1. The results indicated that most probably diclofenac biodegrading cultures consisted of members of genera Ferrovibrio, Hydrocarboniphaga, Zavarzinia, and Sphingopyxis, while in ibuprofen biodegradation Nocardioides and Starkeya, and in carbamazepine biodegradation Nocardioides, Pseudonocardia, and Sphingopyxis might be involved. During the enrichments, compared to the initial state the percentage relative abundance of these genera increased up to three orders of magnitude. Except Starkeya, the genomes of these bacteria were reconstructed and annotated. Metabolic analyses of the annotated genomes indicated that these bacteria harbored genes associated with pharmaceutical biodegradation. Stenotrophomonas humi DIC_5 and Rhizobium daejeonense IBU_18 isolates eliminated diclofenac and ibuprofen during the tests in the presence of either glucose (3 g l−1) or in R2A broth. Higher than 90% concentration reduction was observed in the case of both compounds.

Raman spectra obtained by UV laser excitation above 260 nm are contaminated by spectrally overlapping UV-excited fluorescence. Here, we demonstrate a picosecond UV Kerr-gated Raman spectroscopy setup to suppress the fluorescence in Raman spectra excited by 280 nm laser pulses. Specifically, we use a model sample that consists of acetonitrile contaminated by a small amount of toluene for generating UV-excited fluorescence. We were able to acquire a Raman spectrum of acetonitrile by suppressing the UV-excited fluorescence of toluene by the action of a 1-mm thick fused silica-based UV Kerr gate operated by 1030 nm, ~1 ps gating pulses. These results also indicate the challenges that must be overcome in the future for realizing UV-fluorescence-free UV resonance Raman (UVRR) spectroscopy studies of molecules exhibiting electronic resonances around 280 nm using laser excitation wavelengths right at or close to this resonance.

High spatial resolution mass spectrometry imaging has been identified as a key technology needed to improve understanding of the chemical components that influence antibiotic resistance within biofilms, which are communities of micro-organisms that grow attached to a surface. Time-of-flight secondary ion mass spectrometry (ToF–SIMS) offers the unique ability for label-free 3D imaging of organic molecules with sub-micrometer spatial resolution and high sensitivity. Several studies of biofilms have been done with the help of ToF–SIMS, but none of those studies have shown 3D imaging of antibiotics in native-state hydrated biofilms with cell-level resolution. Because ToF–SIMS measurements must be performed in a high-vacuum environment, cryogenic preparation and analysis are necessary to preserve the native biofilm structure and antibiotic spatial distribution during ToF–SIMS measurements. In this study, we have investigated the penetration of the antibiotic ciprofloxacin into Bacillus subtilis biofilms using sub-micrometer resolution 3D imaging cryo-ToF–SIMS. B. subtilis biofilms were exposed to physiologically relevant levels of ciprofloxacin. The treated biofilms were then plunge-frozen in liquid propane and analyzed with ToF–SIMS under cryogenic conditions. Multivariate analysis techniques, including multivariate curve resolution (MCR) and inverse maximum signal factor (iMSF) denoising, were used to aid analysis of the data and facilitate high spatial resolution 3D imaging of the biofilm, providing individually resolved cells and spatially resolved ciprofloxacin intensity at “real world” concentrations. Graphical Abstract

In the present study, DOPO-based alkoxysilane (DOPO-ETES) and amido alkoxysilane (DOPO-AmdPTES) were synthesized by one-step and without by-products as halogen-free flame retardants. The flame retardants were applied on cotton fabric utilizing sol–gel method and pad-dry-cure finishing process. The flame retardancy, the thermal stability and the combustion ehaviour of treated cotton were evaluated by surface and bottom edge ignition flame test (according to EN ISO 15025), thermogravimetric analysis (TGA) and micro-scale combustion calorimeter (MCC). Unlike CO/DOPO-ETES sample, cotton treated with DOPO-AmdPTES nanosols exhibits self-extinguishing ehaviour with high char residue, an improvement of the LOI value and a significant reduction of the PHRR, HRC and THR compared to pristine cotton. Cotton finished with DOPO-AmdPTES reveals a semi-durability after ten laundering cycles keeping the flame-retardant properties unchanged. According to the results obtained from TGA-FTIR, Py-GC/MS and XPS, the major activity of flame retardant occurs in the condensed phase via catalytic induced char formation as physical barrier along with the activity in the gas phase derived mainly from the dilution effect. The early degradation of CO/DOPO-AmdPTES compared to CO/DOPO-ETES, triggered by the cleavage of the weak bond between P and C=O, as the DFT study indicated, provides the beneficial effect of this flame retardant on the fire resistance of cellulose. Graphical abstract

The black-odor water body restoration is an unfinished business in protecting and maintaining the ecological functions of natural water systems in China. Magnetic coagulation (MC) had found a vast application prospect for its high-efficient separation. In this work, the performance of MC was analyzed to explore its role in natural water protection, with a focus on identification and removal mechanisms of the dissolved organic matters (DOM) by absorption and fluorescence spectroscopy in terms of the spectroscopic indices, two-dimensional correlation spectroscopy (2D-COS), and parallel factor analysis (PARAFAC) methods. MC presented an excellent performance for suspended and colloidal matters, phosphorus, and DOMs, and showed high adaptability in pollution interception and water restoration. Tryptophan-like, tyrosine-like, and humics were identified as the key components in the wastewater, which were mainly recently produced or microbial-derived. The targeted pollutants were DOMs with high molecular weight, hydrophobicity, polarity, and aromaticity for the high affinity with the hydrolyzed Al species. Polyaluminum chloride (PAC) was the key in dissolved pollutants removal, while the mix stage is crucial for DOMs with low MW or humic-like substances as PAM facilitated the flocs formation and the absorption process. However, the residual PAM and the redissolved DOMs from the recycled magnetic seeds also act as the DOM source. This work identified the DOM composition and removal mechanism in MC, which would promote its application in natural water protection. CA extern

Poly(oxanorbornene)s bearing TPP and PEGylated ZnPc with varying compositions have been synthesized. Thus, highest reported singlet oxygen generation for a Pc derivative in water (ΦΔ = 0.93) and excellent biological activity have been accomplished.