Search

A bovine milk oligosaccharide (BMO) library, prepared from cow colostrum, with 34 structures was generated and used to rapidly screen oligosaccharides in domestic animal milks and a whey permeate powder. The novel library was entered into a custom Personal Compound Database and Library (PCDL) and included accurate mass, retention time, and tandem mass spectra. Oligosaccharides in minute-sized samples were separated using nanoliquid chromatography (nanoLC) coupled to a high resolution and sensitive quadrupole-Time of Flight (Q-ToF) MS system. Using the PCDL, 18 oligosaccharides were found in a BMO-enriched product obtained from whey permeate processing. The usefulness of the analytical system and BMO library was further validated using milks from domestic sheep and buffaloes. Through BMO PCDL searching, 15 and 13 oligosaccharides in the BMO library were assigned in sheep and buffalo milks, respectively, thus demonstrating significant overlap between oligosaccharides in bovine (cow and buffalo) and ovine (sheep) milks. This method was shown to be an efficient, reliable, and rapid tool to identify oligosaccharide structures using automated spectral matching.

A precise, sensitive and reliable RP-HPLC method was developed to enable not only unequivocal determination of alpha-lactalbumin and beta-lactoglobulin in bovine whey samples, but also simultaneous measurement of proteose peptone, caseinomacropeptide, bovine serum albumin and immunoglobulin G. The optimised method on the Resource RPC column allowed separation of the proteins in 30 min and could be applied to the analysis of soluble proteins in a variety of commercial and laboratory whey products. Furthermore, some qualitative information on protein heterogeneity and quality could be derived from the RP-HPLC analyses with additional data available from on-line electrospray mass spectrometry. Within- and between-day repeatability over a wide range of concentrations was excellent (RSD< or =5%) for all proteins except immunoglobulin G and bovine serum albumin where RSD was 7-10%. Analysis of grouped data from whey protein concentrate and whey protein isolate samples gave a limit of detection of < or =0.3% powder mass and a limit of quantitation of < or =1.0% powder mass for all proteins except immunoglobulin G. Limits of detection and quantitation were 0.6% and 2.0%, respectively, for this protein. Quantitative data obtained by the RP-HPLC method compared very favourably with data obtained by alternative methods of whey protein analysis.

An enzymatic method for hydrolyzing bovine milk proteins was developed. Purified milk proteins (alpha-lactalbumin, beta-lactoglobulin, and beta-casein) were hydrolyzed in 0.1 M Hepes buffer (pH 7.5) containing pronase E, aminopeptidase M, and prolidase at 37 degrees C for 20 h. Free glutamine and other amino acids were derivatized with phenylisothiocyanate and separated using a C18 Pico-Tag column. Amino acids were eluted from the column with an aqueous sodium acetate-acetonitrile gradient with detection at 254 nm. Glutamine recoveries from hydrolyzed alpha-lactalbumin, beta-lactoglobulin, and beta-casein were 78 +/- 4, 98 +/- 3, and 101 +/- 3% of the theoretical values, respectively. The recoveries of most amino acids were comparable with those obtained using acid hydrolysis, except for the recoveries of proline and acidic amino acids. These peptide bonds appeared to be resistant to enzymatic hydrolysis and also to inhibit the hydrolysis of adjacent amino acids. Free glutamine was found to be very stable (97% recovery) under the enzymatic hydrolysis conditions.

Bovine whey comprises four major protein groups [σ-lactalbumin, β-lactoglobulin variants A and B, bovine serum albumin and immunoglobulin (specifically IgG) which have a diverse range of molecular masses, pI values, number of phenotypic variants and subunit compositions. The development of a capillary zone electrophoresis method to separate these whey proteins is described. Initially separation of the individual whey proteins was evaluated using a number of different buffer systems with pKa values above pH 7. At buffer pH values greater than 7, protein-capillary wall interactions were minimized as the majority of the whey proteins had a net negative charge because their pI values are in the range pH 4–6. A wide range of buffer additives (organic modifiers and surfactants) were also added to alter the chemistry of the separation, to further block protein-capillary wall interactions and to thus optimize the resolution of the different protein peaks. A sample buffer/separation buffer system was developed which eliminated an initial solvent trough that coincided with the IgG peak. This made it possible to quantify the IgG protein. Optimum resolution and analysis time (10 min) for the four whey proteins was achieved with a sample buffer consisting of 10 mM phosphate, pH 7.4 and a separation buffer consisting of 150 mM sodium borate, pH 8.5 containing 0.05% Tween 20. This method was succesfully used to separate a mixture of commercially purified whey proteins and to separate and quantitate the individual whey proteins in an acid whey sample.

beta-Lactoglobulin is a whey protein that affects milk composition and product functionality and which can be present in up to eight genetic variant forms. A free zone capillary electrophoresis method has been developed to separate and identify the beta-lactoglobulin A, B and C variants. Three buffer systems [borate, 2-(N-morpholino)-ethanesulphonic acid (MES) and bis(2-hydroxyethyl)imino-tris(hydroxymethyl)methane (Bistris)] were examined over a range of pH values and with the addition of the separation buffer modifiers Tween 20 and/or ethanolamine. The most successful combination of these was 50 mM MES at pH 8.0 with the addition of 0.1% Tween 20 which clearly resolved the three variants from both each other and from the other whey proteins even though the MES buffer was acting well outside its pKa range (pH 5.3-7.3). The retention times and identification of the individual variants were verified by spiking with commercially purified beta-lactoglobulin A and B proteins and a beta-lactoglobulin AC whey. The method was then used to phenotype beta-lactoglobulin in a sample population of New Zealand Jersey cows.

Extensive hydrolysis of whey protein isolate by Alcalase was shown to induce gelation mainly via hydrophobic interactions. The aim of this work was to characterize the peptides released in order to better understand this phenomenon. The apparent molecular mass distribution indicated that aggregates were formed by small molecular mass peptides (

Extensive hydrolysis of whey protein isolate by Alcalase 2.4L produces a gel. The objectives of this study were to compare enzyme-induced gelation with the plastein reaction by determining the types of interactions involved in gelation. The average chain length of the peptides did not increase during hydrolysis and reached a plateau after 30 min to be approximately 4 residues, suggesting that the gel was formed by small molecular weight peptides held together by non-covalent interactions. The enzyme-induced gel network was stable over a wide range of pH and ionic strength and, therefore, showed some similarities with the plastein reaction. Disulfide bonds were not involved in the gel network. The gelation seems to be caused by physical aggregation, mainly via hydrophobic interactions with hydrogen bonding and electrostatic interactions playing a minor role.

A capillary zone electrophoresis (CZE) method to separate the peptide series val-gly n , where n is 1 to 4, has been evaluated and compared to separation by reversed-phase high-performance liquid chromatography (RP-HPLC). The method was able to quantitate peptides present at very low concentrations (down to 0.05 m M ) with high reproducibility and accuracy and was capable of separating peptides differing in size by only a single glycine residue. It could also separate the peptides val-gly and leu-gly which differed in only a single side-chain methylene group. The method was fast, required small sample volumes, and proved to be superior to RP-HPLC. The suitability of the CZE method to analyze peptide uptake by dairy starter bacteria is discussed.

The separation of the four major whey proteins by sodium dodecyl sulphate (SDS)-capillary gel electrophoresis (CGE) is described. Whilst commercially purified whey proteins could be analysed using the recommended protocol, the more complex nature of an acid whey and a reconstituted whey protein concentrate (WPC) powder necessitated considerable refinement of the CGE sample buffer. Individual whey proteins in the acid whey and WPC samples were then also separated and quantitated using capillary zone electrophoresis, polyacrylamide gel electrophoresis (PAGE) and HPLC methods and the results were compared. The values obtained for alpha-lactalbumin (alpha-Lac) and beta-lactoglobulin (beta-Lg) were consistent throughout the various methods, although size-exclusion HPLC, SDS-PAGE and SDS-CGE could not separate the two beta-Lg variants or the glycosylated form of alpha-Lac from the beta-Lg. There was considerable variation in the values for the bovine serum albumin and immunoglobulin determined by the different methods and it was concluded that none of the methods could satisfactorily quantitate all four whey proteins.