Search

The combination of electrogenerated chemiluminescence (ECL) and aptamer-gated indicator delivering (gAID) magnetic mesoporous silica nanoparticles embedded into glass fibre paper functionalised with poly(ethyleneglycol) and N-(3-triethoxysilylpropyl)diethanolamine allowed the development of a rapid test that detects penicillin directly in diluted milk down to 50 ± 9 ppt in

Microbial contamination of fuels by fungi and bacteria presents risks of corrosion and fuel system fouling. In this work, a rapid test for the determination of microbial genomic DNA from aqueous fuel extracts is presented. It combines test strips coated with polystyrene core/mesoporous silica shell particles, to the surface of which modified fluorescent molecular beacons are covalently grafted, with a smartphone detection system. In the hairpin loop, the beacons incorporate a target sequence highly conserved in all bacteria, corresponding to a fragment of the 16S ribosomal RNA gene, which is also present to a significant extent in the 18S rRNA gene of fungi, allowing for broadband microbial detection. In the developed assay, the presence of genomic DNA extracts from bacteria and fungi down to ca. 20-50 μg L-1 induced a distinct fluorescence response. The optical read-out was adapted for on-site monitoring by combining a 3D-printed case with a conventional smartphone, taking advantage of the sensitivity of contemporary complementary metal oxide semiconductor (CMOS) detectors. Such an embedded assembly allowed to detect microbial genomic DNA in aqueous extracts down to ca. 0.2-0.7 mg L-1 and presents an important step toward the on-site uncovering of fuel contamination in a rapid and simple fashion.

Rapid testing methods for the use directly at a point of need are expected to unfold their true potential especially when offering adequate capabilities for the simultaneous measurement of multiple analytes of interest. Considering the unique modularity, high sensitivity, and selectivity of antibody‐gated indicator delivery (gAID) systems, a multiplexed assay for three small‐molecule explosives (TATP, TNT, PETN) was thus developed, allowing to detect the analytes simultaneously with a single test strip at lower ppb concentrations in the liquid phase in, The three small‐molecule explosives TATP, TNT and PETN can be detected simultaneously with a single test strip at lower ppb concentrations in the liquid phase in

Vor dem Hintergrund der einzigartigen Modularitat, hohen Empfindlichkeit und Selektivitat von Antikorper‐gesteuerten Indikatorfreisetzungssystemen (gAID‐Systemen) wurde hier ein Multiplex‐Assay fur drei organische Explosivstoffmolekule (TATP, TNT, PETN) entwickelt, der es erlaubt, die Analyten gleichzeitig in flussiger Phase mit einem einzelnen Teststreifen und einem Fluoreszenzlesegerat bzw. Smartphone als Detektor in Konzentrationen bis in den unteren ppb‐Bereich in

[EN] In this work, the optimization of the immunochemical response of antibody-gated indicator delivery (gAID) systems prepared with mesoporous silica nanoparticles has been studied along various lines of system tailoring, targeting the peroxide-type explosive TATP as an exemplary analyte. The mechanism of detection of these gAID systems relies on a displacement of an antibody "cap" bound to hapten derivatives anchored to the surface of a porous hybrid material, allowing the indicator cargo stored in the mesopores to escape and massively amplify the analyte-related signal. Since our aim was to obtain gAID systems with the best possible response in terms of sensitivity, selectivity, and assay time, sera obtained from different immunization boosts were screened, the influence of auxiliary reagents was assessed, structural hapten modification (hapten heterology) was investigated, and various indicator dyes and host materials were tested. Considering that highly selective and sensitive immunological responses are best obtained with highaffinity antibodies which, however, could possess rather slow dissociation constants, leading to slow responses, the main challenge was to optimize the immunochemical recognition system for a rapid response while maintaining a high sensitivity and selectivity. The best performance was observed by grafting a slightly mismatching (heterologous) hapten to the surface of the nanoparticles in combination with high-affinity antibodies as "caps", yielding for the first time gAID nanomaterials for which the response time could be improved from hours to, This research was funded by the German Research Foundation (DFG; CL 761/1-19), the Spanish Government (project RTI2018-100910-B-C41 (MCUI/FEDER, EU)), and the Generalitat Valenciana (project PROMETEO 2018/024).

[EN] We report herein the design of a strip-based rapid test utilizing bio-inspired hybrid nanomaterials for the in situ and at site detection of the drug scopolamine (SCP) using a smartphone for readout, allowing SCP identification in diluted saliva down to 40 nM in less than 15 min. For this purpose, we prepared a nanosensor based on mesoporous silica nanoparticles loaded with a fluorescent reporter (rhodamine B) and functionalized with bethanechol, a potent agonist of recombinant human muscarinic acetylcholine receptor M-2 (M-2-AChR). M-2-AChR interaction with the anchored bethanechol derivative leads to capping of the pores. The sensing mechanism relies on binding of SCP to M-2-AChR resulting in pore opening and delivery of the entrapped rhodamine B reporter. Moreover, the material was incorporated into strips for lateral-flow assays coupled to smartphone readout, giving fast response time, good selectivity, and exceptional sensitivity. In an attempt to a mobile analytical test system for law enforcement services, we have also developed a dualplex lateral flow assay for SCP and 3,4-methylenedioxypyrovalerone (MDPV) also known as the so-called "cannibal drug"., This research was funded by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government), the Agencia Estatal de Investigacion (AEI), the European Union (projects RTI2018-100910-B-C41 and RTI2018-101599-B-C22-AR (MCIU/AEI/FEDER, EU), the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (Project PROMETEO 2018/024) and the German Research Foundation (DFG; CL 761/1-19). E. G. is grateful to the Spanish MEC for her FPU grant (FPU16/02464).

The aim of this study is to determine the efficiency of loading and release of several zwitterionic, neutral, anionic and cationic dyes into/from mesoporous nanoparticles to find the optimum loading and release conditions for their application in detection protocols. The loading is carried out for MCM-41 type silica supports suspended in phosphate-buffered saline (PBS) buffer (pH 7.4) or in acetonitrile, involving the dyes (rhodamine B chloride, rhodamine 101 chloride, rhodamine 101 perchlorate, rhodamine 101 inner salt, meso-(4-hydroxyphenyl)-boron–dipyrromethene (BODIPY), sulforhodamine B sodium salt and fluorescein 27). As a general trend, rhodamine-based dyes are loaded with higher efficiency, when compared with BODIPY and fluorescein dyes. Between the rhodamine-based dyes, their charge and the solvent in which the loading process is carried out play important roles for the amount of cargo that can be loaded into the materials. The delivery experiments carried out in PBS buffer at pH 7.4 reveal for all the materials that anionic dyes are more efficiently released compared to their neutral or cationic counterparts. The overall best performance is achieved with the negatively charged sulforhodamine B dye in acetonitrile. This material also shows a high delivery degree in PBS buffer.

Functional core/shell particles are highly sought after in analytical chemistry, especially in methods suitable for single-particle analysis such as flow cytometry because they allow for facile multiplexed detection of several analytes in a single run. Aiming to develop a powerful bead platform of which the core particle can be doped in a straightforward manner while the shell offers the highest possible sensitivity when functionalized with (bio)chemical binders, polystyrene particles were coated with different kinds of mesoporous silica shells in a convergent growth approach. Mesoporous shells allow us to obtain distinctly higher surface areas in comparison with conventional nonporous shells. While assessing the potential of narrow- as well as wide-pore silicas such as Mobil composition of matter no. 41 (MCM-41) and Santa Barbara amorphous material no. 15 (SBA-15), especially the synthesis of the latter shells that are much more suitable for biomolecule anchoring was optimized by altering the pH and both, the amount and type of the mediator salt. Our studies showed that the best performing material resulted from a synthesis using neutral conditions and MgSO4 as an ionic mediator. The analytical potential of the particles was investigated in flow cytometric DNA assays after their respective functionalization for individual and multiplexed detection of short oligonucleotide strands. These experiments revealed that a two-step modification of the silica surface with amino silane and succinic anhydride prior to coupling of an amino-terminated capture DNA (c-DNA) strand is superior to coupling carboxylic acid-terminated c-DNA to aminated core/shell particles, yielding limits of detection (LOD) down to 5 pM for a hybridization assay, using labeled complementary single-stranded target DNA (t-DNA) 15mers. The potential of the use of the particles in multiplexed analysis was shown with the aid of dye-doped core particles carrying a respective SBA-15 shell. Characteristic genomic sequences of human papillomaviruses (HPV) were chosen as the t-DNA analytes here, since their high relevance as carcinogens and the high number of different pathogens is a relevant model case. The title particles showed a promising performance and allowed us to unequivocally detect the different high- and low-risk HPV types in a single experimental run.

Antibody-gated indicator delivery (gAID) systems based on mesoporous silica nano- and microparticle scaffolds are a promising class of materials for the sensitive chemical detection of small-molecule analytes in simple test formats such as lateral flow assays (LFAs) or microfluidic chips. Their architecture is reminiscent of drug delivery systems, only that reporter molecules instead of drugs are stored in the voids of a porous host particle. In addition, the pores are closed with macromolecular “caps” through a tailored “gatekeeping” recognition chemistry so that the caps are opened when an analyte has reacted with a “gatekeeper”. The subsequent uncapping leads to a release of a large number of indicator molecules, endowing the system with signal amplification features. Particular benefits of such systems are their modularity and adaptability. With the example of the immunochemical detection of type-I pyrethroids by fluorescent dye-releasing gAID systems, the influence of several tuning modes on the optimisation of such hybrid sensory materials is introduced here. In particular, different mesoporous silica supports (from nano- and microparticles to platelets and short fibres), different functionalisation routes and different loading sequences were assessed. The materials’ performances were evaluated by studying their temporal response behaviour and detection sensitivity, including the tightness of pore closure (through the amount of blank release in the absence of analyte) and the release kinetics. Our results indicate that the better the paratope-accommodating Fab region of the antibody “cap” fits into the host material's pore opening, the better the closing/opening mechanism can be controlled. Because such materials are well-suited for LFAs, performance assessment included a test-strip format besides conventional assays in suspension. In combination with dyes as indicators and smartphones for read-out, simple analytical tests for use by untrained personnel directly at a point-of-need such as an aeroplane cabin can be devised, allowing for sensitivities down to the μg kg−1 range in

The employment of type-I pyrethroids for airplane disinfection in recent years underlines the necessity to develop sensing schemes for the rapid detection of these pesticides directly at the point-of-use. Antibody-gated indicator-releasing materials were thus developed and implemented with test strips for lateral-flow assay-based analysis employing a smartphone for readout. Besides a proper matching of pore sizes and gating macromolecules, the functionalization of both the material's outer surface as well as the strips with PEG chains enhanced system performance. This simple assay allowed for the detection of permethrin as a target molecule at concentrations down to the lower ppb level in less than 5 minutes.

Commercial bead-based assays are commonly built upon polystyrene particles. The polymeric carrier can be encoded with organic dyes and has ideal material properties for cytometric applications such as low density and high refractive index. However, functional groups are conventionally integrated during polymerization and subsequent modification is limited to the reactivity of those groups. Additionally, polystyrene as the core material leads to many hydrophobic areas still being present on the beads’ surfaces even after functionalization, rendering the particles prone to nonspecific adsorption during an application. The latter calls for several washing steps and the use of additives in (bio)analytical assays. In this contribution, we show how these limitations can be overcome by using monodisperse polystyrene (PS) core/silica (SiO2) shell particles (SiO2@PS). Two different hydrophobic BODIPY (boron–dipyrromethene) dyes were encapsulated inside a poly(vinylpyrrolidone) (PVP) -stabilized polystyrene core in...

The synthesis, characterization, and application of mesoporous materials containing boron–dipyrromethene (BODIPY) moieties that allow the sensitive and selective detection of HgII in aqueous environments by fluorescence enhancement is reported. For this purpose, BODIPY dye I containing a thia‐aza crown ether receptor as the fluorescent probe for the detection of HgII in aqueous environments is encapsulated into mesoporous materials to avoid self‐quenching or aggregation in water. Determination of HgII is accomplished within a few seconds with high selectivity and sensitivity, reaching a limit of detection of 12 ppt. The determination of trace amounts of HgII in natural waters and in fish extracts is demonstrated by using our sensing material. The incorporation of the material into several μ‐PAD strips yields a portable, cheap, quick, and easy‐to‐handle tool for trace HgII analysis in water.

A droplet-based microfluidic sensor was developed for the detection of Hg2+ traces in water. The approach uses gated mesoporous nanoparticles loaded with a fluorescent BODIPY dye. The squaraine-based gating mechanism is highly selective for Hg2+ and the indicator release mechanism ensures sensitive detection. The microfluidic system is modular and was assembled from simple PTFE/PFA tubes, while detection was realized with standard optomechanic, optic, and electronic parts. The sensor shows a stable response without memory effects and allows the detection of Hg2+ in water down to 20 ppt.

Commercial bead-based assays are commonly built upon polystyrene particles. The polymeric carrier can be encoded with organic dyes and has ideal material properties for cytometric applications such as low density and high refractive index. However, functional groups are conventionally integrated during polymerization and subsequent modification is limited to the reactivity of those groups. Additionally, polystyrene as the core material leads to many hydrophobic areas still being present on the beads' surfaces even after functionalization, rendering the particles prone to nonspecific adsorption during an application. The latter calls for several washing steps and the use of additives in (bio)analytical assays. In this contribution, we show how these limitations can be overcome by using monodisperse polystyrene (PS) core/silica (SiO

[DE] Mit DNA verschlossene und mit Farbstoff beladene mesoporöse Siliciumdioxid-Nanopartikel wurden zum Nachweis von Mycoplasma bis zu einer Nachweisgrenze von ca. 70 genomischen DNA-Kopien pro mu-L in real kontaminierten Zellkulturmedien ohne die Hilfe von PCR-Techniken eingesetzt., Diese Arbeit wurde durch die Spanische Regierung (MAT2009-14564-C04-01 und SAF2010 15512) und die Generalitat Valenciana (PROMETEO/2009/016 und 2010/005) unterstützt. E.C. dankt dem Spanischen Bildungsministerium für ein Stipendium

The coupling of gated-indicator delivery with highly specific biochemical recognition is an innovative strategy for the detection of DNA sequences, able to compete with classical methods which need PCR amplification, in important areas such as point-of-care diagnostics or detection of specific biological contaminations with pathogens. Such comparatively simple and cheap yet highly selective and sensitive assays hold promise for use in less-developed areas of the world., Financial support from the Spanish Government (MAT2009-14564-C04-01 and SAF2010 15512), the Generalitat Valenciana (PROM-ETEO/2009/016 and 2010/005) is gratefully acknowledged. E. C. thanks the Ministerio de Educacion for a fellowship. L. M. thanks Generalitat Valenciana for her Post-Doc VALI + D contract.

[EN] A novel nanodevice consisting of mesoporous nanoparticles loaded with vancomycin and capped with epsilon-poly-L-lysine (epsilon-PL) was prepared and its interaction with different Gram-negative bacteria studied. A remarkable improvement in the efficacy of the antimicrobial drug epsilon-PL and a broadening of the antimicrobial spectrum of vancomycin is demonstrated., The authors thank the Spanish Government (project MAT2012-38429-C04-01) the Generalitat Valenciana (project PROMETEO/2009/016) and the CIBER-BBN for their support. N.M. also thanks the Ministerio de Ciencia e Innovacion for her FPI grant. L.M. also thanks Generalitat Valenciana for her post-doc VALI+D contract.

[EN] A novel mesoporous silica material containing boron-dipyrromethene (BODIPY) moieties (I) is employed for the detection of nerve agent simulants (NASs) and the organophosphate nerve or chemical warfare agents (CWAs) Sarin (GB), Soman (GD), and Tabun (GA) in aqueous environments. The reactive BODIPY dye with an optimum positioned hydroxyl group undergoes acylation reactions with phosph(on)ate substrates, yielding a bicyclic ring. Due to aggregation of the dyes in water, the sensitivity of the free dye in solution is very low. Only after immobilization of the BODIPY moieties into the silica substrates is aggregation inhibited and a sensitive determination of the NASs diethyl cyanophosphonate (DCNP), diethyl chlorophosphate (DCP) and diisopropyl fluorophosphate (DFP) possible. The signaling mode is a strong quenching of the fluorescence, reaching LODs in the pM range. The best performing hybrid material was singled out from a library of hybrid silicas varying in morphology and surface functionalization. The response to actual CWAs such as GB, GD, and GA has also been tested, offering similar behavior as for the simulants. The proposed reaction mechanism has been verified by investigation of other model materials, containing for instance BODIPY moieties without an optimum hydroxyl group (III) or a BODIPY dye with an all-aliphatic counterpart (IV). The latter can only form a monocyclic reaction product, showing much less reactivity as I. Assays with other possible competitors have been additionally carried out, showing favorably low cross-reactivities. Finally, the determination of NASs in several natural waters has been demonstrated. (C) 2017 Elsevier B.V. All rights reserved., Financial support from the Alexander von Humboldt Foundation, Germany's Federal Ministry for Economic Affairs and Energy, the Generalitat Valenciana (Project PROMETEOII/2014/047), the Spanish Government and European FEDER funds (Project MAT2015-64139-C4) is gratefully acknowledged. We thank S. Selve (Technical University Berlin) for TEM images, A. Zehl (Humboldt University Berlin) for elemental analysis, D. Pfeifer and C. Jager (BAM, Div. 1.3) for NMR support, A. Zimathies (BAM, Div. 1.3) for N2 adsorption/desorption measurements and T. Fischer (BAM, Div. 1.9) for support with the fluorescence decay measurements.

[EN] The synthesis of capped mesoporous silica nanoparticles (MSN) conjugated with an antibody (AB) as a gatekeeper has been carried out in order to obtain a delivery system able to release an entrapped cargo (dye) in the presence of a target molecule (antigen) to which the conjugated antibody binds selectively. In particular, MSN loaded with rhodamine B and functionalized on the external surface with a suitable derivative of N-(t-butyl)- 3-oxo-(5a,17b)-4-aza-androst-1-ene-17-carboxamide (finasteride) have been prepared (S1). The addition of polyclonal antibodies against finasteride induced capping of the pores due to the interaction with the anchored hapten-like finasteride derivative to give a MSN¿hapten¿AB nanoparticle S1-AB. It was found that the addition of capped material S1-AB to water solutions containing finasteride resulted in displacement of the antibody, pore uncapping and entrapped-dye release. The response of the gated material is highly selective, and only finasteride, among other steroids, was able to induce a significant uncapping process. Compared with finasteride, the finasteride metabolite was able to release 17% of the dye, whereas the exogen steroids testosterone, metenolone and 16-b-hydroxystanozolol only induced very little release of rhodamine B (lower than 10%) from aqueous suspensions containing sensing solid S1-AB. A detection limit as low as 20 ppb was found for the fluorimetric detection of finasteride. In order to evaluate a possible application of the material for label-free detection of finasteride, the capped material was isolated and stored to give final sensing solid S1-AB-i. It was found to display a similar behavior towards finasteride as to that shown by freshly prepared S1-AB; even after a period of two months, no significant loss of selectivity or sensitivity was noted. Moreover, to study the application for the detection of finasteride in biological samples, this ¿aged¿ material, S1-AB-i, was tested using commercially available blank urine as matrix. Samples containing 70 and 90% blank urine were spiked with a defined amount of finasteride, and the concentration was determined using capped S1-AB-i. Recovery ranges from 94% to 118% were reached., Financial support from the Spanish Government (project MAT2009-14564-C04-01) and the Generalitat Valenciana (Spain) (projects PROMETEO/2009/016 and PROMETEO/2010/008) is gratefully acknowledged. E. C. thanks the Minesterio de Ciencia e Innovacion (MICINN, Spain) for her fellowship.

The Front Cover shows how differences in color and fluorescence on a test strip can be easily read out with a mobile device. Two reference spots frame the sensitive spot that indicates the presence of trace amounts of HgII below the threshold in a natural water sample. This dipstick contains a hybrid material that combines boron‐dipyrromethene (BODIPY) probes sterically loaded into specifically tailored mesoporous silica particles, allowing for ultrasensitive HgII detection through enhanced fluorescence within a few seconds. More information can be found in the Full Paper by K. Rurack and co‐workers on page 957 in Issue 12, 2018 (DOI: https://doi.org/10.1002/open.201800111).

Chemical warfare (CW) agents are toxic chemicals that have been used in several terrorist attacks in recent years. Among CW species, nerve agents are probably the most dangerous; their high toxicity and facile synthesis underscores the need to detect these lethal compounds with quick, reliable procedures. Analytical methods based on enzymatic assays and physical measurements have generally been used to detect these hazards. However, these protocols usually have limitations such as low selectivity, poor portability, and a certain level of complexity. In recent years, several chromogenic and fluorogenic sensors, and reagents for the detection of nerve agents have been described. For instance, approaches that involve perborate-mediated oxidation of organophosphorus agents, fluorescent probes based on polyethylene terephthalate (PET), assays that use oximate-containing derivatives, molecularly imprinted polymers, nanoparticles, carbon nanotubes, porous silicon, displacement-like procedures, and cyclization reactions in push–pull chromophores have been reported. Most of these protocols rely on changes in fluorescence properties, whereas few examples deal with color modulations. Colorimetric detection is particularly appealing because it uses low-cost, widely available instrumentation and allows assays to be detected with the naked eye. However, the development of selective, sensitive chromogenic probes for the detection of deadly chemical species is still rare. Given our interest in the design of novel hybrid organic– inorganic materials as probes, we focused on the preparation of a new optical test for the detection of nerve agent mimics based on nerve agent control of mass transport to the surface of functionalized silica nanoparticles. The chromogenic approach (Scheme 1) involves the use of silica nanoparticles that are functionalized with two different subunits— thiol groups (SH) and aliphatic alcohols (OH). The role of the

This paper describes the design of new controlled delivery systems consisting of a mesoporous support functionalized on the pore outlets with a certain hapten able to interact with an antibody that acts as a nanoscopic cap. The opening protocol and delivery of the entrapped guest is related by a displacement reaction involving the presence in the solution of the antigen to which the antibody is selective. As a proof-of-the-concept, the solid MCM-41 was selected as support and was loaded with the dye [Ru(bipy)(3)]Cl(2). Then a suitable derivative of the hapten 4-(4-aminobenzenesulfonylamino)benzoic acid was anchored on the outer surface of the mesoporous support (solid S1). Finally the pores were capped with a polyclonal antibody for sulfathiazole (solid S1-AB). Delivery of the dye in the presence of a family of sulfonamides was studied in phosphate-buffered saline (PBS; pH 7.5). A selective uncapping of the pores and dye delivery was observed for sulfathiazole. This delivery behavior was compared with that shown by other solids that were prepared as models to assess the effect of the hapten and its interaction with antibody in the dye delivery control in the presence of the antigen.

Test strips that in combination with a portable fluorescence reader or digital camera can rapidly and selectively detect chemical warfare agents (CWAs) such as Tabun (GA), Sarin (GB), and Soman (GD) and their simulants in the gas phase have been developed. The strips contain spots of a hybrid indicator material consisting of a fluorescent BODIPY indicator covalently anchored into the channels of mesoporous SBA silica microparticles. The fluorescence quenching response allows the sensitive detection of CWAs in the mu g m(-3) range in a few seconds., Financial support from the Alexander von Humboldt Foundation, the German Federal Ministry for Economic Affairs and Energy, European FEDER funds (MAT2012-38429-C04), the Generalitat Valenciana (PROMETEOII/2014/047), and the Spanish Government is gratefully acknowledged. We thank S. Selve (Technical University Berlin) for TEM images, A. Zehl (Humboldt University Berlin) for elemental analysis, D. Pfeifer (BAM, Div. 1.3) for NMR, A. Zimathies (BAM 1.3) for N2 adsorption/desorption, S. Ewald and A. Lehmann (BAM 1.5 & 1.8) for MS support, and T. Fischer (BAM 1.9) for support with the fluorescence decay measurements.

Copper complexes of chiral iminopyridines prepared from camphane-derived ketones and picolylamine catalyzed the enantioselective Henry (nitroaldol) reaction between nitromethane and a number of aromatic and aliphatic aldehydes with high yields and good enantioselectivities. Iminopyridines derived from (1 R )-(+)-camphor and (1 S )-(+)-ketopinic acid gave the best results to afford the opposite enantiomers in each case, despite the fact they have the same stereochemical pattern at the camphane skeleton. The reactions were carried out without air or moisture exclusion.

Climent Terol, E. (2012). Design of new hybrid materials: Study of its application in new detection formats and in controlled release applications [Tesis doctoral]. Editorial Universitat Politècnica de València. doi:10.4995/Thesis/10251/17939., Palancia

Chiral iminopyridines prepared in a modular fashion from monoterpenic (camphor-derived) ketones and pyridinylalkylamines catalyze the enantioselective Henry (nitro aldol) reaction between nitromethane and o -anisol in the presence of copper(II) acetate, with high yields and good ee (up to 86%) under straightforward experimental conditions without the need for air or moisture exclusion.

The design of comparatively simple and modularly configurable artificial systems able to communicate through the exchange of chemical messengers is, to the best of our knowledge, an unexplored field. As a proof-of-concept, we present here a family of nanoparticles that have been designed to communicate with one another in a hierarchical manner. The concept involves the use of capped mesoporous silica supports in which the messenger delivered by a first type of gated nanoparticle is used to open a second type of nanoparticle, which delivers another messenger that opens a third group of gated nanoobjects.We believe that the conceptual idea that nanodevices can be designed to communicate with one another may result in novel applications and will boost further advances towards cooperative systems with complex behavior as a result of the communication between simple abiotic individual components., Financial support from the Spanish government (project MAT2012-38429-C04-01) and the Generalitat Valencia (project PROMETEO/2009/016) is gratefully acknowledged. E.A. thanks the Universitat Politecnica de Valencia (project SP20120795) for support. C.G. is grateful to the Spanish Ministry of Science and Innovation for a grant. E.C. is grateful to the Adolf-Martens-Fonds for a fellowship. We are indebted to M. Dinter (LTB Lasertechnik Berlin GmbH) for assistance with the graphics.

Das Design von vergleichsweise einfachen und modular konfigurierbaren k nstlichen Systemen, die ber den Austausch von chemischen Botenstoffen miteinander kommunizieren kçnnen, ist unseres Wissens ein bislang unerforschtes Gebiet. In einer grundlegenden Arbeit pr sentieren wir hier eine Serie von Nanopartikeln, die in hierarchischer Art und Weise miteinander kommunizieren kçnnen. Das Konzept beruht auf gedeckelten mesoporçsen Silikat-Tr gern, bei denen der aus einem ersten Typ von gesteuerten Nanopartikeln freigesetzte chemische Botenstoff einen zweiten Typ von gedeckelten Nanopartikeln çffnet, welche wiederum einen anderen Botenstoff freisetzen, die eine dritte Gruppe von gesteuerten Nanoobjekten çffnen. Dieses Konzept, das nanoskopische Objekte so aufgebaut werden kçnnen, dass sie miteinander Informationen austauschen, kann unserer Meinung nach zu einer Reihe neuartiger Anwendungen f hren und wird Fortschritte im Bereich kooperativer Systeme mit komplexen Eigenschaften, die auf der Kommunikation einfacher individueller abiotischer Komponenten basieren, befçrdern.

This critical review is focused on examples reported in the year 2009 dealing with the design of chromogenic and fluorogenic chemosensors or reagents for anions (264 references).

An aptamer-capped mesoporous material for the selective and sensitive detection of &-thrombin in human plasma and serum has been prepared and characterised., The authors thank the Spanish Government (project MAT2012-38429-C04-01, CTQ2010-20541) the Generalitat Valenciana (project PROMETEO/2009/016) and the CIBER-BBN for their support. C. C. thanks the Universitat Politecnica de Valencia (UPV PAID-06-11) for support. M.O. is grateful to the Universitat Politecnica de Valencia for her grant.

This critical review is focused on examples reported in the year 2009 dealing with the design of chromogenic and fluorogenic chemosensors or reagents for anions (264 references).

[EN] Antibodygated MSNs that are loaded with a rhodamine dye and that can be used for the determination of the presence of peroxide-based explosive TATP with a lateral-flow fluorescence reader have been designed and prepared, thereby allowing for detection limits in the lower ppb range. The mechanism of the detection relies on a displacement of the antibody from the surface of the hybrid material because of highly affine antibody-TATP interactions, which release a much larger number of entrapped dye molecules from the pores than antibodies are displaced. The high selectivity of the antibody is retained in the gated material, thus allowing for a remarkable discrimination against H2O2. System design and optimization led to straightforward integration into a lateral-flow assay without further treatment or conditioning of the test strips while guaranteeing fast overall assay times of minus or equal 10 min. Moreover, besides showing a remarkable robustness, the inherent architecture of the assay relies on a single-step immunochemical reaction, that is, it can dispense with secondary (labeled) antibodies and enables ratiometric signal assessment in the presence of the analyte by simple comparison of the fluorescence signals in two zones. Because of the modularity of the approach, the concept is easily generalizable and applicable for many small-molecule analytes. For instance, assays can be imagined that contain various hybrids of S1-AB(n) type, for which each material capped with a certain antibody is loaded with a different dye, thus envisioning multiplexed analysis with such simple assays., Financial support from the Spanish Government (MAT2009-14564-C04-01), the Generalitat Valenciana (PROMETEO/2009/016), the Innovationsfonds (BAM/Bundesministerium fur Wirtschaft und Technologie), and BAM's PhD Program (M.A.W.) is gratefully acknowledged. E.C. thanks the Ministerio de Educacion for a fellowship. We are indebted to J. Schenk, BAM-1.0, for help with the piezo dispenser and S. Fischer and W. Weigel, Scienion AG, Berlin, for support with the spotter.

Hybrid nanoparticles with a large specific surface area are a particularly exciting vehicle for delivery applications. Such highly porous or container-like structures, usually prepared from silica and frequently from gold, can incorporate a large number of chemical substances such as drug and/or indicator molecules. When equipped with a chemically or physically addressable gating function at the openings of the voids, the release of the cargo can be controlled at will. Because many more molecules can be stored as cargo in the pores of the support than there are functional groups as anchoring sites for the gating entities attached to the outer surface (for efficient pore capping), the systems possess inherent features of (signal) amplification. The present article will introduce various design strategies for different types of physical (light, temperature, magnetism) and chemical (pH, metal ions, anion, small organic molecules, enzymes) stimuli in connection with drug and indicator release. We will highlight exciting aspects of combining both features in theranostic applications and will stress which requirements still have to be met by many of the systems to be readily applicable in a sensory context., Financial support from the Innovationsfonds (BAM/Bundesministerium fur Wirtschaft und Technologie), the Spanish Government (project MAT2012-38429-C04-01) and the Generalitat Valenciana (project PROMETEO/2009/016) is gratefully acknowledged.

The present study reports a novel approach for the chromogenic sensing of CO2 using silica nanoparticles N1 functionalized with amino and thiol moieties. The reaction of CO2 present in air with the hybrid silica nanoparticles controlled the access of a squaraine dye to the surface of nanoparticles, due to formation of carbamates between amino groups and carbon dioxide. This competitive reaction results in a simple chromogenic response to CO2. By using these bifunctionalized nanoparticles CO2 detection was achieved using suspensions of N1 in phosphate buffer or by using N1 directly in contact with air containing CO2. The use of nanoparticles that can be easily functionalized with two or more individual groups that are able to react with dyes and CO2, and the possible use of a wide range of different dyes (for signalling), makes this approach highly appealing and versatile for the design of chromo¿fluorogenic dosimeters for the evaluation of the accumulative exposure to CO2 in different environments, Financial support from the Spanish Government (project MAT2012-38429-C04-01) and the Generalitat Valencia (project PROMETEO/2009/016) is gratefully acknowledged. A. A. thanks the Generalitat Valencia for a Santiago Grisolia fellowship. M. E. M. is grateful to the Spanish Ministerio de Ciencia e Innovacion for an FPU grant.

A hybrid nanoscopic capped mesoporous material, that is selectively opened in the presence of nerve agent simulants, has been prepared and used as a probe for the chromo-fluorogenic detection of these chemicals. © 2011 The Royal Society of Chemistry., Financial support from the Spanish Government (project MAT2009-14564-C04-01 and -02) and Generalitat Valenciana (project PROMETEO/2009/016) is gratefully acknowledged. I. C. thanks the UPV for her Fellowship. SCSIE (Universidad de Valencia) is gratefully acknowledged for all the equipment employed.

A new chromo-fluorogenic sensing protocol for anionic surfactants in aqueous environments using silica functionalised nanoparticles containing imidazolium and thiol groups has been developed. © 2011 The Royal Society of Chemistry., Financial support from the Spanish Government (project MAT2009-14564-C04-01) and the Generalitat Valencia (project PROMETEO/2009/016) is gratefully acknowledged. E. C. and C. G. thank the MICINN and the UPV for fellowships.

Bis-functionalised silica surfaces have been designed in order to develop selective and sensitive probes for the chromo-fluorogenic detection of certain guests. The designed system consists of a siliceous support bis-functinalised with thiol and polyamine groups. Thiol groups are suitable reactive centres (R) that are know to react with squaraine dyes (D) inducing bleaching, whereas polyamines act as host sites (H) able to coordinate certain target guests (G). In the absence of G, the reactive groups (R) react with the dye resulting in a bleaching of the solution. On the contrary, the presence of certain guest (G) results in a control of the reaction kinetic between R and D and eventually in a complete reaction inhibition. Different functionalised solids were prepared by reaction of the siliceous surface with different concentrations of mercaptopropyltrimethoxysilane (MPTS) and 3-[2-(2-aminoethylamino)ethylamino]propyl-trimethoxysilane (N3TS). The final materials (solids to ) were characterized employing standard procedures. In a first step the reactivity of the signaling dye D (squaraine ) with the reactive centre R (thiol groups) was studied as a function of the pH using solid that showed a most suitable response. At pH 7 and pH 5 there was a quick reaction between the squaraine and the thiol groups on the surface. On the contrary this reaction is significantly slower at pH 3 due to the different degree of protonation of the amines as a function of the pH. Additionally the reaction of with the squaraine has been studied in the presence of a range of inorganic anions with different structural dimensions and charges, including chloride, perchlorate, nitrate, sulfate, phosphate and pyrophosphate. At pH 3 the reaction of the dye with the thiol groups is still effective in the presence of chloride and perchlorate, but the reaction is highly inhibited in the presence of the anions nitrate, sulfate, phosphate and pyrophosphate. At pH 7 the squaraine reacts very fast with the thiol groups in the presence of all the anions studied. In contrast, at pH 5 only pyrophosphate is able to inhibit, to a certain extent, the reaction of the squaraine with the thiols, resulting in a selective chromo-fluorogenic detection of this anion in pure water. Finally, the observed behaviour was discussed in terms of both, the kinetic rates of the reaction between the thiol and the squaraine groups and the thermodynamic interaction reaction between the anions and the polyamine moieties.

Heparin detective: Silica nanoparticles functionalised with ion-channel scaffolds were prepared and used for the chromofluorogenic sensing of heparin in aqueous environments (see figure). The surface of the nanoparticles was functionalised with polyamines (binding sites) and thiols. The reaction of a dye (squaraine) with the surface thiol groups was selectively inhibited by the coordination of heparin with the partly protonated polyamines.