Search

The oxidation of 3,4-dihydroxybenzaldehyde (3,4-DHB) on glassy carbon electrodes gives rise to stable redox-active electropolymerized films containing a quinone moiety. The redox response of the films is that anticipated for a surface-immobilized redox couple, and the pH dependence of the redox activity of these films is 60 mV/pH unit, which is very close to the anticipated Nernstian dependence of 59 mV/pH unit. We have characterized the dependence of the growth of these films on the solution concentration of 3,4-DHB, the potential for deposition, the time of deposition, and the pH. In addition, we have measured their permeability and apparent diffusion coefficient ([D.sub.app]) of these films. These films exhibit potent and persistent electrocatalytic behavior toward NADH oxidation. In a flow injection analysis determination, the limit of detection is estimated to be in the submicromolar regime.

The development of rapid, accurate, sensitive, and low-cost diagnostic methods for COVID-19 detection in real-time is the unique way to control infection sources and monitor illness progression. In this work, we propose an electrochemical biosensor for the rapid and accuracy diagnosis of COVID-19, through the determination of ORF 1ab specific sequence. The biosensor is based on the immobilization of a thiolated sequence partially complementary (domain 1) to ORF 1ab on gold screen-printed electrodes and the use of bifunctional Au@Pt/Au core@shell nanoparticles modified with a second thiolated sequence partially complementary to ORF 1ab (domain 2) as electrochemical indicator of the hybridization of DNA sequences. The synthesized Au@Pt/Au nanoparticles consist of an Au core, a shell of Pt (Au@Pt NPs), that provides an excellent electrocatalytic activity toward the oxygen reduction reaction (ORR) even after formation of hybrid biomaterials by modification, through the Au protuberances growth on the NPs surface, with an oligonucleotide with recognition ability. The ORR electrochemical activity, enhanced by the label element (Au@Pt/Au NPs), has been employed, for the first time, as indicator of the hybridization event. Based on this strategy, target sequences of the SARS-CoV-2 virus have been detected with a detection limit of 32 pM. The selectivity of the biosensor was confirmed by analysing ORF 1ab sequence in the presence of DNA sequences from other viruses. The biosensor has been successfully applied to the direct detection of the virus in non-amplified samples of nasopharyngeal swabs from infected and non-infected patients. Results compare well with those obtained through RT-qPCR but our method is more rapid since does not need any amplification process., Competing Interests: Declaration of competing interest None., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

A novel immunosensor based on electrochemiluminescence resonance energy transfer (ECL-RET) for the sensitive determination of N protein of the SARS-CoV-2 coronavirus is described. For this purpose, bifunctional core@shell nanoparticles composed of a Pt-coated Au core and finally decorated with small Au inlays (Au@Pt/Au NPs) have been synthesized to act as ECL acceptor, using [Ru (bpy) 3 ] 2+ as ECL donor. These nanoparticles are efficient signaling probes in the immunosensor developed. The proposed ECL-RET immunosensor has a wide linear response to the concentration of N protein of the SARS-CoV-2 coronavirus with a detection limit of 1.27 pg/mL. Moreover, it has a high stability and shows no response to other proteins related to different virus. The immunosensor has achieved the quantification of N protein of the SARS-CoV-2 coronavirus in saliva samples. Results are consistent with those provided by a commercial colorimetric ELISA kit. Therefore, the developed immunosensor provides a feasible and reliable tool for early and effective detection of the virus to protect the population., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

The development of DNA-sensing platforms based on new synthetized Methylene Blue functionalized carbon nanodots combined with different shape gold nanostructures (AuNs), as a new pathway to develop a selective and sensitive methodology for SARS-CoV-2 detection is presented. A mixture of gold nanoparticles and gold nanotriangles have been synthetized to modify disposable electrodes that act as an enhanced nanostructured electrochemical surface for DNA probe immobilization. On the other hand, modified carbon nanodots prepared a la carte to contain Methylene Blue (MB-CDs) are used as electrochemical indicators of the hybridization event. These MB-CDs, due to their structure, are able to interact differently with double and single-stranded DNA molecules. Based on this strategy, target sequences of the SARS-CoV-2 virus have been detected in a straightforward way and rapidly with a detection limit of 2.00 aM. Moreover, this platform allows the detection of the SARS-CoV-2 sequence in the presence of other viruses, and also a single nucleotide polymorphism (SNPs). The developed approach has been tested directly on RNA obtained from nasopharyngeal samples from COVID-19 patients, avoiding any amplification process. The results agree well with those obtained by RT-qPCR or reverse transcription quantitative polymerase chain reaction technique., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 Elsevier B.V. All rights reserved.)

A direct and simple fluorescent assay for the total polyphenol determination based on the bioconjugate formed between the laccase enzyme (TvL from Trametes versicolor) and carbon nanodots (CD) is developed. One of the most used reactions for the determination of phenols is based on the enzymatic reaction of their oxidation to quinones. In this work, CD has been biofunctionalized with TvL (TvL-CD) and employed as a fluorescent label to follow the enzymatic reaction. The bioconjugate was formed and characterized by spectroscopy and microscopy. The optimal TvL-CD ratio was established. The reaction between the bioconjugate and a phenolic compound such as gallic acid (GA) was followed by monitoring the fluorescence bioconjugate decrease due to the quenching effect of the quinones generated in the enzymatic reaction. These studies confirm that bioconjugation does not inhibit the enzymatic activity and the fluorescence decrease during the enzymatic reaction is mainly due to an electron transfer processes. Based on these results, a new method for the quantitative determination of polyphenols measured as GA concentration is developed. The detection and quantification limit was found to be 7.4 and 25 μM, respectively. Subsequently, the method has been applied to the direct determination of GA in wine, juice, and rice leaf extracts., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

Given the great utility that having fast, efficient and cost-effective methods for the detection of SARS-CoV-2 in wastewater can have in controlling the pandemic caused by this virus, the development of new dependable and specific SARS-CoV-2 coronavirus sensing devices to be applied to wastewater is essential to promote public health interventions. Therefore, herein we propose a new method to detect SARS-CoV-2 in wastewater based on a carbon nanodots-amplified electrochemiluminescence immunosensor for the determination of the SARS-CoV-2 Spike S1 protein. For the construction of the immunosensor, N-rich carbon nanodots have been synthetized with a double function: to contribute as amplifiers of the electrochemiluminescent signal in presence of [Ru(bpy) 3 ] 2+ and as antibody supports by providing functional groups capable of covalently interacting with the SARS-CoV-2 Spike S1 antibody. The proposed ECL immunosensor has demonstrated a high specificity in presence of other virus-related proteins and responded linearly to SARS-CoV-2 Spike S1 concentration over a wide range with a limit of detection of 1.2 pg/mL. The immunosensor has an excellent stability and achieved the detection of SARS-CoV-2 Spike S1 in river and urban wastewater, which supplies a feasible and reliable sensing platform for early virus detection and therefore to protect the population. The detection of SARS-CoV-2 Spike S1 in urban wastewater can be used as a tool to measure the circulation of the virus in the population and to detect a possible resurgence of COVID-19., (Copyright © 2022. Published by Elsevier B.V.)

Carbon nanodots modified with Neutral Red covalently inserted in the nanostructure (NR-CDs) have been prepared by a simple synthesis method based on microwave irradiation under controlled temperature and pressure. The synthetized NR-CDs have been characterized by different techniques, demonstrating the covalent bonding of Neutral Red molecules to the carbon dots nanostructure. Fluorescence activity of the prepare NR-CDs has been explored showing different interaction pathways with singled and doubled stranded DNA. These studies have been successfully applied to develop a new fluorescence DNA hybridization assay to the detection of a specific DNA sequence of Escherichia coli bacteria., (© 2022. The Author(s).)

Gold nanotriangles (AuNTs) functionalized with dithiolated oligonucleotides have been employed to develop an amplification-free electrochemical biosensor for SARS-CoV-2 in patient samples. Gold nanotriangles, prepared through a seed-mediated growth method and exhaustively characterized by different techniques, serve as an improved electrochemical platform and for DNA probe immobilization. Azure A is used as an electrochemical indicator of the hybridization event. The biosensor detects either single stranded DNA or RNA sequences of SARS-CoV-2 of different lengths, with a low detection limit of 22.2 fM. In addition, it allows to detect point mutations in SARS-CoV-2 genome with the aim to detect more infective SARS-CoV-2 variants such as Alpha, Beta, Gamma, Delta, and Omicron. Results obtained with the biosensor in nasopharyngeal swab samples from COVID-19 patients show the possibility to clearly discriminate between non-infected and infected patient samples as well as patient samples with different viral load. Furthermore, the results correlate well with those obtained by the gold standard technique RT-qPCR, with the advantage of avoiding the amplification process and the need of sophisticated equipment., (© 2022. The Author(s).)

This work focuses on the development of an electrochemiluminescent nanostructured DNA biosensor for SARS-CoV-2 detection. Gold nanomaterials (AuNMs), specifically, a mixture of gold nanotriangles (AuNTs) and gold nanoparticles (AuNPs), are used to modified disposable electrodes that serve as an improved nanostructured electrochemiluminescent platform for DNA detection. Carbon nanodots (CDs), prepared by green chemistry, are used as coreactants agents in the [Ru(bpy) 3 ] 2+ anodic electrochemiluminescence (ECL) and the hybridization is detected by changes in the ECL signal of [Ru(bpy) 3 ] 2+ /CDs in combination with AuNMs nanostructures. The biosensor is shown to detect a DNA sequence corresponding to SARS-CoV-2 with a detection limit of 514 aM., (Copyright © 2022 Elsevier B.V. All rights reserved.)

A simple carbon nanodot-based electrogenerated chemiluminescence biosensor is described for sensitive and selective detection of microRNA-21 (miRNA-21), a biomarker of several pathologies including cardiovascular diseases (CVDs). The photoluminescent carbon nanodots (CNDs) were obtained using a new synthesis method, simply by treating tiger nut milk in a microwave reactor. The synthesis is environmentally friendly, simple, and efficient. The optical properties and morphological characteristics of the CNDs were exhaustively investigated, confirming that they have oxygen and nitrogen functional groups on their surfaces and exhibit excitation-dependent fluorescence emission, as well as photostability. They act as co-reactant agents in the anodic electrochemiluminescence (ECL) of [Ru(bpy) 3 ] 2+ , producing different signals for the probe (single-stranded DNA) and the hybridized target (double-stranded DNA). These results paved the way for the development of a sensitive ECL biosensor for the detection of miRNA-21. This was developed by immobilization of a thiolated oligonucleotide, fully complementary to the miRNA-21 sequence, on the disposable gold electrode. The target miRNA-21 was hybridized with the probe on the electrode surface, and the hybridization was detected by the enhancement of the [Ru(bpy) 3 ] 2+ /DNA ECL signal using CNDs. The biosensor shows a linear response to miRNA-21 concentration up to 100.0 pM with a detection limit of 0.721 fM. The method does not require complex labeling steps, and has a rapid response. It was successfully used to detect miRNA-21 directly in serum samples from heart failure patients without previous RNA extraction neither amplification process., (© 2021. The Author(s).)

This work focuses on the combination of molybdenum disulfide (MoS 2 ) and à la carte functionalized carbon nanodots (CNDs) for the development of DNA biosensors for selective and sensitive detection of pathogens. MoS 2 flakes prepared through liquid-phase exfoliation, serves as platform for thiolated DNA probe immobilization, while thionine functionalized carbon nanodots (Thi-CNDs) are used as electrochemical indicator of the hybridization event. Spectroscopic and electrochemical studies confirmed the interaction of Thi-CNDs with DNA. As an illustration of the pathogen biosensor functioning, DNA sequences from InIA gen of Listeria monocytogenes bacteria and open reading frame sequence (ORF1ab) of SARS-CoV-2 virus were detected and quantified with a detection limit of 67.0 fM and 1.01 pM, respectively. Given the paradigmatic selectivity of the DNA hybridization, this approach allows pathogen detection in the presence of other pathogens, demonstrated by the detection of Listeria monocytogenes in presence of Escherichia coli. We note that this design is in principle amenable to any pathogen for which the DNA has been sequenced, including other viruses and bacteria. As example of the application of the method in real samples it has been used to directly detect Listeria monocytogenes in cultures without any DNA Polymerase Chain Reaction (PCR) amplification process., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Introduction: Onychomycosis is a frequent and underdiagnosed condition. Approximately 90% of toenail onychomycosis infections are caused by dermatophytes, but classical diagnosis based on culture and microscopy observation is slow and has low sensitivity. Both limitations can be solved incorporating molecular techniques to routine diagnosis of onychomycosis., Objective: Prospective evaluation of the utility of incorporating in the clinical laboratory workflow a commercial real time PCR (qPCR) for dermatophytes detection in nails after potassium hydroxide direct observation screening., Materials and Methods: 152 nail samples were included (34 KOH negative and 118 KOH positive) and processed by culture and qPCR., Results: In the negative KOH group, only one dermatophyte grew in culture and three were detected by qPCR. In the group of positive KOH, 57 dermatophytes grew in culture and 81 were detected by qPCR. In this group, 25% of diagnosed dermatophytes were detected only by qPCR. The sensitivity of qPCR compared to culture is 92.8% and time of response decreases from days to hours., Conclusion: Based in our results, we propose a workflow algorithm for a clinical laboratory that eliminates culture for qPCR positive samples., (Copyright © 2020 Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. Published by Elsevier España, S.L.U. All rights reserved.)

A rapid fluorometric method is described for the determination of lactate and cholesterol by using ZnO nanowires (ZnO NWs). The assay is based on the detection of the hydrogen peroxide generated during the enzymatic reactions of the oxidation of lactate or cholesterol. Taking advantage of the electrostatic interactions between the enzymes and the ZnO NWs, two bioconjugates were prepared by mixing the nanomaterial and the enzymes, viz. lactate oxidase (LOx) or cholesterol oxidase (ChOx). The enzymatically generated hydrogen peroxide quenches the fluorescence of the ZnO NWs, which have emission peaks at 384 nm and at 520 nm under 330 nm photoexcitation. H 2 O 2 quenches the 520 nm band more strongly. Response is linear up to 1.9 μM lactate concentration, and up to 1.1 μM cholesterol concentration. Relative standard deviation was found to be 5%. The detection limits for lactate and cholesterol are 0.54 and 0.24 μM, respectively. Graphical abstractSchematic representation of fluorescence assay based on ZnO nanowires photoluminiscence for lactate and colesterol detection.

This work reports on the advantages of using carbon nanodots (CNDs) in the development of reagent-less oxidoreductase-based biosensors. Biosensor responses are based on the detection of H 2 O 2 , generated in the enzymatic reaction, at 0.4 V. A simple and fast method, consisting of direct adsorption of the bioconjugate, formed by mixing lactate oxidase, glucose oxidase, or uricase with CNDs, is employed to develop the nanostructured biosensors. Peripherical amide groups enriched CNDs are prepared from ethyleneglycol bis-(2-aminoethyl ether)-N,N,N',N'-tetraacetic acid and tris(hydroxymethyl)aminomethane, and used as precursors. The bioconjugate formed between lactate oxidase and CNDs was chosen as a case study to determine the analytical parameters of the resulting L-lactate biosensor. A linear concentration range of 3.0 to 500 µM, a sensitivity of 4.98 × 10 -3 µA·µM -1 , and a detection limit of 0.9 µM were obtained for the L-lactate biosensing platform. The reproducibility of the biosensor was found to be 8.6%. The biosensor was applied to the L-lactate quantification in a commercial human serum sample. The standard addition method was employed. L-lactate concentration in the serum extract of 0.9 ± 0.3 mM (n = 3) was calculated. The result agrees well with the one obtained in 0.9 ± 0.2 mM, using a commercial spectrophotometric enzymatic kit.

A novel electrochemiluminescence (ECL) sensor for the sensitive detection of taurine was developed. Taurine contains an aliphatic amine that gives it co-reactant properties. The ECL response of the taurine/[Ru(bpy) 3 ] 2+ system was analyzed on two different electrodes surfaces, screen-printed graphene and gold electrodes, before and after modification with ZnO nanowires (ZnO NWs). The ZnO NWs modified electrode yielded an enhanced ECL signal, allowing rapid detection of taurine at 5.5 × 10 -6  mol L -1 detection limit. The ECL signal is stable and reproducible. The sensor has been applied to the determination of taurine in a commercial taurine supplement., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The authors report on a fluorometric method for the rapid detection of BRCA1, CFRT and MRP3 gene mutations. These are associated with breast cancer, cystic fibrosis and autoimmune hepatitis diseases, respectively. Carbon nanodots with blue fluorescence (with excitation/emission maxima at 340/440 nm) were synthesized and characterized, and their interactions with DNA were investigated. Changes in the fluorescence intensity following interaction with ssDNA and dsDNA were used for specific DNA sequence of BRCA1, CFRT and MRP3 genes detection. The response to DNAs is linear up to 200 nM and the detection limit is 270 pM. The assay selectivity allows the detection of single gene mutations. Under optimum conditions, the assay can rapidly discriminate between wild type and mutated samples. Graphical abstract Schematic representation of fluorescence assay for rapid detection of gene mutation based on fluorescent carbon nanodots.

Modern radiotherapy techniques (intensity-modulated radiotherapy, volumetric-modulated arctherapy, image-guided radiotherapy) or stereotactic radiotherapy are in expansion in most French cancer centres. The arrival of such techniques requires updates of existing equipment or implementation of new radiotherapy devices with adapted options. With the arrival of these new devices, there is a need to develop a quality and safety policy. This is necessary to ease the process from the setup to the first treated patient. The quality and safety policy is maintained to ensure the quality assurance of the radiotherapy equipment. We conducted a review of the literature on the quality and safety policy in the French legal framework that can be proposed when implementing a new radiotherapy device., (Copyright © 2018. Published by Elsevier Masson SAS.)

Lactic acid is a relevant analyte in the food industry, since it affects the flavor, freshness, and storage quality of several products, such as milk and dairy products, juices, or wines. It is the product of lactose or malo-lactic fermentation. In this work, we developed a lactate biosensor based on the immobilization of lactate oxidase (LOx) onto N , N '-Bis(3,4-dihydroxybenzylidene) -1,2-diaminobenzene Schiff base tetradentate ligand-modified gold nanoparticles (3,4DHS-AuNPs) deposited onto screen-printed carbon electrodes, which exhibit a potent electrocatalytic effect towards hydrogen peroxide oxidation/reduction. 3,4DHS-AuNPs were synthesized within a unique reaction step, in which 3,4DHS acts as reducing/capping/modifier agent for the generation of stable colloidal suspensions of Schiff base ligand-AuNPs assemblies of controlled size. The ligand-in addition to its reduction action-provides a robust coating to gold nanoparticles and a catalytic function. Lactate oxidase (LOx) catalyzes the conversion of l-lactate to pyruvate in the presence of oxygen, producing hydrogen peroxide, which is catalytically oxidized at 3,4DHS-AuNPs modified screen-printed carbon electrodes at +0.2 V. The measured electrocatalytic current is directly proportional to the concentration of peroxide, which is related to the amount of lactate present in the sample. The developed biosensor shows a detection limit of 2.6 μM lactate and a sensitivity of 5.1 ± 0.1 μA·mM -1 . The utility of the device has been demonstrated by the determination of the lactate content in different matrixes (white wine, beer, and yogurt). The obtained results compare well to those obtained using a standard enzymatic-spectrophotometric assay kit., Competing Interests: The authors declare no conflict of interest. The founding sponsors had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, and in the decision to publish the results.

We have developed a biosensing platform for lactate determination based on gold electrodes modified with diamond nanoparticles of 4nm of nominal diameter, employing the enzyme lactate oxidase and (hydroxymethyl)ferrocene (HMF) as redox mediator in solution. This system displays a response towards lactate that is completely different to those typically observed for lactate biosensors based on other nanomaterials, such as graphene, carbon nanotubes, gold nanoparticles or even diamond nanoparticles of greater size. We have observed by cyclic voltammetry that, under certain experimental conditions, an irreversible wave (E(0)=+0.15V) appears concomitantly with the typical Fe(II)/Fe(III) peaks (E(0)=+0.30V) of HMF. In this case, the biosensor response to lactate shows simultaneous electrocatalytic peaks at +0.15V and +0.30V, indicating the concurrence of different feedback mechanisms. The achievement of a biosensor response to lactate at +0.15V is very convenient in order to avoid potential interferences. The developed biosensor presents a linear concentration range from 0.02mM to 1.2mM, a sensitivity of 6.1μAmM(-1), a detection limit of 5.3μM and excellent stability. These analytical properties compare well with those obtained for other lactate-based biosensors that also include nanomaterials and employ HMF as redox mediator., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The interaction of small molecules with DNA has found diagnostic and therapeutic applications. In this work, we propose the use of two different dyes, in particular Azure A and Safranine, as bifunctional markers of on-surface DNA hybridization and potent tools for screening of specific gene mutations directly in real DNA PCR amplicons extracted from blood cells. By combining spectroscopic and electrochemical methods we demonstrate that both dyes can interact with single and double stranded DNA to a different extent, allowing reliable hybridization detection. From these data, we have also elucidated the nature of the interaction. We conclude that the binding mode is fundamentally intercalative with an electrostatic component. The dye fluorescence allows their use as nucleic acid stains for the detection of on-surfaces DNA hybridization. Its redox activity is exploited in the development of selective electrochemical DNA biosensors., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The substitution of hydrogen with chlorine in the metallacarborane [3,3-Fe(1,2- closo -C 2 B 9 H 11 ) 2 ] - cluster modulates the formal potential of the Fe 3+ /Fe 2+ redox couple, shifting it to a more positive value. Hence, very similar redox probes with a wide range of formal potentials, ranging from negative to positive values, are available. Thus, we have achieved the synthesis and studied the electrochemical behaviour of the sodium salt of [3,3-Fe(8,9,12-Cl 3 -1,2- closo -C 2 B 9 H 8 ) 2 ] - in aqueous media. This strategy allows tuning of the redox potential of the [3,3-Fe(1,2- closo -C 2 B 9 H 11 ) 2 ] - framework with a minor change in its shape and dimensions. We also describe the interaction of the prepared [3,3-Fe(8,9,12-Cl 3 -1,2- closo -C 2 B 9 H 8 ) 2 ] - and the pristine [3,3-Fe(1,2- closo -C 2 B 9 H 11 ) 2 ] - with DNA. These studies have been carried out not only with DNA in solution but also with DNA immobilized on screen-printed gold electrodes. The results obtained point to a strong interaction between the metallacarboranes and DNA, to a different extent with single stranded DNA (ssDNA) compared to double stranded DNA (dsDNA). This property makes them selective and wide-ranging potential electrochemical indicators of hybridization. The suitability of these new redox indicators for selective DNA biosensor development has been probed by the direct detection of two different mutations associated with cystic fibrosis in PCR amplicons extracted from blood cells.

A label-free DNA and single nucleotide polymorphism (SNP) sensing method is described. It is based on the use of the pseudodielectric function of gallium plasmonic nanoparticles (GaNPs) deposited on Si (100) substrates under reversal of the polarization handedness condition. Under this condition, the pseudodielectric function is extremely sensitive to changes in the surrounding medium of the nanoparticle surface providing an excellent sensing platform competitive to conventional surface plasmon resonance. DNA sensing has been carried out by immobilizing a thiolated capture probe sequence from Helicobacter pylori onto GaNP/Si substrates; complementary target sequences of Helicobacter pylori can be quantified over the range of 10 pM to 3.0 nM with a detection limit of 6.0 pM and a linear correlation coefficient of R(2) = 0.990. The selectivity of the device allows the detection of a single nucleotide polymorphism (SNP) in a specific sequence of Helicobacter pylori, without the need for a hybridization suppressor in solution such as formamide. Furthermore, it also allows the detection of this sequence in the presence of other pathogens, such as Escherichia coli in the sample. The broad applicability of the system was demonstrated by the detection of a specific gene mutation directly associated with cystic fibrosis in large genomic DNA isolated from blood cells.

Multi-tasking 3,4-dihydroxysalophen Schiff base tetradentate ligand (3,4-DHS) as reductant, stabilizer, and catalyst in a new concept of gold nanoparticles (AuNPs) synthesis is demonstrated. 3,4-DHS is able to reduce HAuCl4 in water, acting also as capping agent for the generation of stable colloidal suspensions of Schiff base ligand-AuNPs assemblies of controlled size by providing a robust coating to AuNPs, within a unique reaction step. Once deposited on carbon electrodes, 3,4-DHS-AuNPs assemblies show a potent electrocatalytic effect towards hydrazine oxidation and hydrogen peroxide oxidation/reduction.

In the present work, we have included for the first time diamond nanoparticles (DNPs) in a sol-gel matrix derived from (3-mercaptopropyl)-trimethoxysilane (MPTS) in order to improve electron transfer in a lactate oxidase (LOx) based electrochemical biosensing platform. Firstly, an exhaustive AFM study, including topographical, surface potential (KFM) and capacitance gradient (CG) measurements, of each step involved in the biosensing platform development was performed. The platform is based on gold electrodes (Au) modified with the sol-gel matrix (Au/MPTS) in which diamond nanoparticles (Au/MPTS/DNPs) and lactate oxidase (Au/MPTS/DNPs/LOx) have been included. For the sake of comparison, we have also characterized a gold electrode directly modified with DNPs (Au/DNPs). Secondly, the electrochemical behavior of a redox mediator (hydroxymethyl-ferrocene, HMF) was evaluated at the platforms mentioned above. The response of Au/MPTS/DNPs/LOx towards lactate was obtained. A linear concentration range from 0.053 mM to 1.6 mM, a sensitivity of 2.6 μA mM(-1) and a detection limit of 16 μM were obtained. These analytical properties are comparable to other biosensors, presenting also as advantages that DNPs are inexpensive, environment-friendly and easy-handled nanomaterials. Finally, the developed biosensor was applied for lactate determination in wine samples., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Nanometric size gold nanoparticles capped with thiotic acid are used to coordinate with the Zn (II) present in the catalytic center of Alcohol Dehydrogenase (ADH). In combination with the NADH oxidation molecular catalyst Azure A, electrografted onto carbon screen-printed electrodes, they are used as scaffold electrodes for the construction of a very efficient ethanol biosensor. The final biosensing device exhibits a highly efficient ethanol oxidation with low overpotential of -0.25 V besides a very good analytical performance with a detection limit of 0.14±0.01 μM and a stable response for more than one month., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In this work, we report the modification of a gold electrode with undoped diamond nanoparticles (DNPs) and its applicability to the fabrication of electrochemical biosensing platforms. DNPs were immobilized onto a gold electrode by direct adsorption and the electrochemical behavior of the resulting DNPs/Au platform was studied. Four well-defined peaks were observed corresponding to the DNPs oxidation/reduction at the underlying gold electrode, which demonstrate that, although undoped DNPs have an insulating character, they show electrochemical activity as a consequence of the presence of different functionalities with unsaturated bonding on their surface. In order to develop a DNPs-based biosensing platform, we have selected glucose oxidase (GOx), as a model enzyme. We have performed an exhaustive study of the different steps involved in the biosensing platform preparation (DNPs/Au and GOx/DNPs/Au systems) by atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM) and cyclic voltammetry (CV). The glucose biosensor shows a good electrocatalytic response in the presence of (hydroxymethyl)ferrocene as redox mediator. Once the suitability of the prototype system to determine glucose was verified, in a second step, we prepared a similar biosensor, but employing the enzyme lactate oxidase (LOx/DNPs/Au). As far as we know, this is the first electrochemical biosensor for lactate determination that includes DNPs as nanomaterial. A linear concentration range from 0.05 mM to 0.7 mM, a sensitivity of 4.0 µA mM(-1) and a detection limit of 15 µM were obtained., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Spherical nanoparticles composed of MMX chains can be made by a polymerization strategy driven by electrochemical processes. In particular, the [Pt2(MeCS2)4I2] (MMI2) dimetal subunit is employed as a monomer for the formation of [Pt2(MeCS2)4I]n spherical nanostructures on surfaces. We have paid particular attention to elucidating the general mechanism of the deposition process on the basis of in situ electrochemical measurements. The reduction of MMI2 to give the electrodeposition of nanostructures agrees well with formation of the reduced [MMI2](-) species followed by a disproportionation mechanism mediated by iodide anions. The chemical composition of the particles was determined by energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) to reveal the MMI2 polymer., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A simple strategy for covalent immobilizing DNA sequences, based on the formation of stable diazonized conducting platforms, is described. The electrochemical reduction of 4-nitrobenzenediazonium salt onto screen-printed carbon electrodes (SPCE) in aqueous media gives rise to terminal grafted amino groups. The presence of primary aromatic amines allows the formation of diazonium cations capable to react with the amines present at the DNA capture probe. As a comparison a second strategy based on the binding of aminated DNA capture probes to the developed diazonized conducting platforms through a crosslinking agent was also employed. The resulting DNA sensing platforms were characterized by cyclic voltammetry, electrochemical impedance spectroscopy and spectroscopic ellipsometry. The hybridization event with the complementary sequence was detected using hexaamineruthenium (III) chloride as electrochemical indicator. Finally, they were applied to the analysis of a 145-bp sequence from the human gene MRP3, reaching a detection limit of 210 pg μL(-1)., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Different enzyme immobilization approaches of Trametes versicolor laccase (TvL) onto gold surfaces and their influence on the performance of the final bioanalytical platforms are described. The laccase immobilization methods include: (i) direct adsorption onto gold electrodes (TvL/Au), (ii) covalent attachment to a gold surface modified with a bifunctional reagent, 3,3'-Dithiodipropionic acid di (N-succinimidyl ester) (DTSP), and (iii) integration of the enzyme into a sol-gel 3D polymeric network derived from (3-mercaptopropyl)-trimethoxysilane (MPTS) previously formed onto a gold surface (TvL/MPTS/Au). The characterization and applicability of these biosensors are described. Characterization is performed in aqueous acetate buffer solutions using atomic force microscopy (AFM), providing valuable information concerning morphological data at the nanoscale level. The response of the three biosensing platforms developed, TvL/Au, TvL/DTSP/Au and TvL/MPTS/Au, is evaluated in the presence of hydroquinone (HQ), used as a phenolic enzymatic substrate. All systems exhibit a clear electrocatalytic activity and HQ can be amperometrically determined at -0.10 V versus Ag/AgCl. However, the performance of biosensors - evaluated in terms of sensitivity, detection limit, linear response range, reproducibility and stability - depends clearly on the enzyme immobilization strategy, which allows establishing its influence on the enzyme catalytic activity., (Copyright © 2013 Elsevier B.V. All rights reserved.)

An electrochemical DNA genosensor constructed by using rough gold as electrode support is reported in this work. The electrode surface nanopatterning was accomplished by repetitive square-wave perturbing potential (RSWPP). A synthetic 25-mer DNA capture probe, modified at the 5' end with a hexaalkylthiol, able to hybridize with a specific sequence of lacZ gene from the Enterobacteriaceae bacterial family was assembled to the rough gold surface. A 25 bases synthetic sequence fully complementary to the thiolated DNA capture probe and a 326 bases fragment of lacZ containing a fully matched sequence with the capture probe, which was amplified by a specific asymmetric polymerase chain reaction (aPCR), were employed as target sequences. The hybridization event was electrochemically monitored by using two different indicators, hexaammineruthenium (III) chloride showing an electrostatic DNA binding mode, and pentaamineruthenium-[3-(2-phenanthren-9-yl-vinyl)-pyridine] (in brief RuL) which binds to double stranded DNA (dsDNA) following an intercalative mechanism. After optimization of the different variables involved in the hybridization and detection reactions, detection limits of 5.30 pg μL(-1) and 10 pg μL(-1) were obtained for the 25-mer synthetic target DNA and the aPCR amplicon, respectively. A RSD value of 6% was obtained for measurements carried out with 3 different genosensors prepared in the same manner., (Copyright © 2013 Elsevier B.V. All rights reserved.)

We report the in situ generation of aryl diazonium cations of Azure A, a redox-active phenothiazine dye, by reaction between the corresponding aromatic aminophenyl group and sodium nitrite in 0.1 M HCl. The subsequent electrochemical reduction of these dye diazonium salts gives rise to conductive electrografted films onto screen-printed carbon (SPC) electrodes. The resulting Azure A films have a very stable and reversible electrochemical response and exhibit potent and persistent electrocatalytic behavior toward NADH oxidation. We have optimized the electrografting conditions in order to obtain SPC modified electrodes with high and stable electrocatalytic response. The kinetic of the reaction between the NADH and the redox active centers in the Azure A film has been characterized using cyclic voltammetry and single step chronoamperometry. The catalytic currents were proportional to the concentration of NADH giving rise to linear calibration plots up to a concentration of 0.5 mM with a detection limit of 0.57±0.03 μM and a sensitivity of 9.48 A mol cm(-2) μM(-1). The precision of chronoamperometric determinations was found to be 2.3% for five replicate determinations of 3.95 μM NADH. The great stability of such modified electrodes makes them ideal for their application in the development of biosensing platforms based on dehydrogenases., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A general bioanalytical platform for biosensor applications was developed based on three-dimensional ordered macroporous (3DOM) gold film modified electrodes using lactate oxidase (LOx) as a case study, within the framework of developing approaches of broad applicability. The electrode was electrochemically fabricated with an inverted opal template, making the surface area of the 3DOM gold electrode up to 18 times higher than that of bare flat gold electrodes. These new electrochemical transducers were characterized by using Field Emission Scanning Electron Microscopy (FE-SEM), Atomic Force Microscopy (AFM) and the X-ray diffraction (XRD). The biosensor was developed by immobilization of lactate oxidase (LOx), on a 3DOM gold electrode modified with a self-assembled monolayer of dithiobis-N-succinimidyl propionate (DTSP). The resulting lactate oxidase biosensor was characterized by electrochemical impedance spectroscopy (EIS). The 3DOM gold electrode not only provides a good biocompatible microenvironment but also promotes the increase of conductivity and stability. Thus, the developed lactate oxidase bioanalytical platforms showed higher mediated bioelectrocatalytic activity compared to others previously described based on polycrystalline gold transducers. The response to varying lactate concentrations has been obtained in the presence of hydroxymethylferrocene as redox mediator in solution. Under these conditions, the bioanalytical platform response for DTSP covalently bound enzyme was improved with respect to that obtained in absence of DTSP., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A new electrochemical approach for an accurate quantification of DNA base pairs in genomic human DNA amplified by polymerase chain reaction (PCR) is described. The method is based on the immobilization of the sample (a thiolated DNA fragment) on the surface of a screen-printed gold electrode through the -SH group at the 5'-end and the subsequent intercalation of a ruthenium pentaamin complex as a redox indicator. The determination of the base pair number in the sequence is achieved by measuring the changes in the electroactivity of the ruthenium complex using Differential Pulse Voltammetry. Calibration curves correlating current intensity with the base pair number allow determining the size of DNA samples, even when very large (over 100 base pairs) sequences are assayed. The method has been successfully applied to detect the DNA cleavage by a site-specific restriction enzyme. The electrochemical approach developed offers the advantage of ease of performance in comparison to other previously described approaches, which are time-consuming and require sophisticated and expensive instrumentation., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The design, characterization and applicability of a nanostructured biosensor platform are described. The biosensor is developed through the immobilization of three components: a polymeric chitosan network previously modified with a redox mediator (denoted as PCF-Pyr-Ch), an enzyme (glucose oxidase, chosen as a model) and carbon nanotubes onto a solid glassy carbon electrode (C). In order to assess the influence of the nanomaterial in the performance of the resulting analytical device, a second biosensor, free of carbon nanotubes, is developed. The characterization of both biosensing platforms was performed in aqueous phosphate buffer solutions using atomic force microscopy technique. In the presence of glucose, both systems exhibit a clear electrocatalytic activity, and glucose could be amperometrically determined at +0.35 V versus Ag/AgCl. The performance of both biosensors was evaluated in terms of sensitivity, detection limit and linear response range. Finally, the enhancement of the analytical response induced by the presence of carbon nanotubes was evaluated.

A study on optical and electrochemical properties resulting upon interaction of Schiff base ligands with gold nanoparticles is presented. The measurements of the optical absorption and fluorescence properties have provided important information about structure-properties dependence. We show that in function of the isomer structure and its attachment orientation with respect to the metal nanoparticle, their optical properties can be modulated. Nanoparticle assemblies mediated by 3,4-DHS were also obtained based on a control of the interparticle interactions and their electrocatalytic activity toward NADH oxidation was investigated.

The design and characterization of a new nanostructured organic-inorganic hybrid material and its application to L-lactic acid determination are described. This material is based on the integration of the enzyme lactate oxidase (LOx) and gold nanoparticles (AuNPs) into a sol-gel 3D polymeric network derived from (3-mercaptopropyl)-trimethoxysilane (MPTS) previously formed onto a gold surface. MPTS presents the advantage of forming a 3D polymeric network containing a large number of thiol tail groups distributed throughout its structure that enable both its anchoring onto gold surfaces and the AuNPs incorporation. Moreover, this matrix provides a biocompatible environment that preserves the catalytic activity of LOx after its immobilization and allows the incorporation of a high amount of enzyme, which is expected to improve the sensitivity of the final biosensing device. Characterization of the designed biosensing platform was performed using quartz crystal microbalance (QCM), scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. From the conjunction of these techniques, information about (i) the kinetic of LOx adsorption process in real time, (ii) the amount of LOx incorporated into the network, and (iii) the morphological characteristics at the nanometre level of the designed biosensing material was obtained. This information is very useful on the development of successful biosensing devices. Finally, the response of the biosensor to L-lactic acid was evaluated. The biosensor responds linearly to L-lactic acid in the range of 50 µM to 0.25 mM, with a sensitivity of 3.4 µA mM(-1) and a detection limit of 4.0 µM.

A screening method for rapid detection of gene mutations directly in polymerase chain reaction (PCR) of genomic DNA is described. The method involves the development of a disposable screen-printed gold electrode modified with a thiolated capture probe directly obtained from denaturated PCR genomic DNA, which recognizes (by hybridization) its fully complementary sequence (wild type), giving a signal, whereas no signal is obtained for single-mismatched target (mutant). The detection of the hybridization event is achieved by changes in the metal redox center electroactivity of the complex [Ru(NH(3))(5) L](2+), where L is [3-(2-phenanthren-9-yl-vinyl)-pyridine], at -0.200 V. This complex binds to double-stranded DNA in a very selective form. The method allows discrimination between the wild type and the mutant of gene MRP3 directly in large PCR amplicons extracted from blood cells, without the need to use either synthetic probes or labeled targets. The mutation involves the presence of a single-nucleotide polymorphism (SNP) at base 54 of a 145-base-pair sequence from exon 21 of gene MRP3. Since the presence of this SNP might lead to a variety of hereditary liver disorders, its identification in a rapid and easy form may provide novel therapeutic targets for the future. The screening method proposed has excellent signal reproducibility, with a relative standard deviation of 10%. In addition, with the method developed as little as 6.6 ng/muL PCR product can be detected.

The design and characterization of a lactate biosensor using a nanostructured rough gold surface as a transducer is reported. The biosensor is developed by immobilization of lactate oxidase (LOx), on a rough gold electrode modified with a self-assembled monolayer of dithiobis-N-succinimidyl propionate (DTSP). This bifunctional reagent preserves the rough gold structure and allows further covalent immobilization of the enzyme through the terminal succinimidyl groups. The rough gold electrode is characterized using field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). The preferential orientation and average crystallite size are obtained by X-ray diffraction (XRD). The resulting lactate oxidase monolayers are characterized by electrochemical impedance spectroscopy (EIS). This nanostructured transducer allows higher mediated electrocatalytic activity than polycrystalline ones. The biosensor response to increasing lactate concentrations, using hydroxymethylferrocene as a redox mediator in solution, is linear up to 1.2 mM with a sensitivity of 1.49 microA mM(-1)., (2010 Elsevier B.V. All rights reserved.)

A comparative study of three different strategies to pattern lactate oxidase (LOx) onto bare gold substrates by microcontact printing (muCP) is presented. The quality of the resulting patterns in terms of homogeneity, compactness and stability has been evaluated by atomic force microscopy in both air and aqueous conditions. The following approaches have been tested: (i) LOx was directly stamped to a bare gold surface; (ii) LOx was previously covalently bonded to a thiolated molecule, dithiodipropionic acid di(N-succinimidyl ester) (DTSP), and this conjugate (LOx/DTSP) was transferred from an elastomeric stamp to a bare gold substrate; (iii) formation of a LOx/DTSP micropattern on a bare gold surface (as described in approach ii) was followed by exposure to a solution containing hexadecylmercaptane (HDM). In all cases, the catalytic activity of the final LOx patterns has been assessed by electrochemical measurements. From comparison of the three strategies, it can be concluded that the third one gives rise to LOx patterns that present a high stability and compactness, also offering the advantage of reducing the number of microcontact printing steps to one.

The design and characterization of a new organic-inorganic hybrid composite material for glucose electrochemical sensing are described. This material is based on the entrapment of both gold nanoparticles (AuNPs) and glucose oxidase, which was chosen as a model, into a sol-gel matrix. The addition of spectroscopic grade graphite to this system, which confers conductivity, leads to the development of a material particularly attractive for electrochemical biosensor fabrication. The characterization of the hybrid composite material was performed using atomic force microscopy and scanning electron microscopy techniques. This composite material was applied to the determination of glucose in presence of hydroxymethylferrocene as a redox mediator. The system exhibits a clear electrocatalytic activity towards glucose, allowing its determination at 250 mV vs Ag/AgCl. The performance of the resulting enzyme biosensor was evaluated in terms of sensitivity, detection limit, linear response range, stability and accuracy. Finally, the enhancement of the analytical response of the resulting biosensor induced by the presence of gold nanoparticles was evaluated by comparison with a similar organic-inorganic hybrid composite material without AuNPs.