Search

Objectives Aerosols and splatter are routinely generated in dental practice and can be contaminated by potentially harmful bacteria or viruses such as SARS-CoV-2. Therefore, preprocedural mouthwashes containing antiseptic agents have been proposed as a potential measure for infection control in dental practice. This review article aims to summarize the clinical (and, if insufficient, preclinical) evidence on preprocedural mouthwashes containing antiseptic agents and to draw conclusions for dental practitioners. Methods Literature on preprocedural mouthwashes for reduction of bacterial or viral load in dental aerosols was searched and summarized. Results Preprocedural mouthwashes, particularly those containing chlorhexidine digluconate (CHX), cetylpyridinium chloride (CPC), or essential oils (EO), can significantly reduce the bacterial load in dental aerosols. With respect to viruses such as HSV-1, there are too little clinical data to draw any clear recommendations. On the other hand, clinical data is consolidating that CPC-containing mouthwashes can temporarily reduce the intraoral viral load and infectivity in SARS-CoV-2 positive individuals. Nevertheless, potential risks and side effects due to regular antiseptic use such as ecological effects or adaptation of bacteria need to be considered. Conclusions The use of preprocedural mouthwashes containing antiseptics can be recommended according to currently available data, but further studies are needed, particularly on the effects on other viruses besides SARS-CoV-2. When selecting a specific antiseptic, the biggest data basis currently exists for CHX, CPC, EO, or combinations thereof. Clinical relevance Preprocedural mouthwashes containing antiseptics can serve as part of a bundle of measures for protection of dental personnel despite some remaining ambiguities and in view of potential risks and side effects.

Zusammenfassung Hintergrund Unter dem Begriff „Rezession“ wird das Freiliegen der Schmelz-Zement-Grenze und Wurzeloberfläche durch apikale Verlagerung der marginalen Gingiva verstanden. Vestibuläre Rezessionen können sowohl bei guter als auch bei schlechter Mundhygiene auftreten und weisen eine multifaktorielle Ätiologie auf. Da sie nicht nur ein ästhetisches Problem für Patienten darstellen, sondern unter anderem mit Überempfindlichkeiten, erschwerter Plaquekontrolle, Entwicklung von kariösen und nicht-kariösen Zahnhartsubstanzdefekten und zunehmendem parodontalen Attachmentverlust einhergehen können, ist oftmals eine Rezessionsdeckung mittels plastisch-parodontalchirurgischer Maßnahmen indiziert. Fallvorstellung Bei einer 23-jährigen Patientin mit einer Rezession an Zahn 41 (Rezessionstyp 1; 5 mm) nach bereits alio loco erfolgter kieferorthopädischer Therapie und mit Diabetes mellitus Typ I sollten primär durch Entfernung eines lingual geklebten verseilten Retainers, Frenektomie des in die Rezession einstrahlenden Frenulum labiale und kieferorthopädischer Korrektur des labialen Wurzeltorques günstige Voraussetzungen für eine anschließend geplante plastisch-parodontalchirurgische Rezessionsdeckung geschaffen werden. Die Rezession konnte allerdings allein durch Frenektomie und die beschriebenen kieferorthopädischen Maßnahmen in 8 Monaten aktiver Behandlungszeit von 5 mm auf 2 mm reduziert und eine Stabilität über 18 Monate dokumentiert werden. Auf die ursprünglich geplante plastisch-parodontalchirurgische Rezessionsdeckung konnte somit verzichtet werden. Schlussfolgerungen Der hier dargestellte Fallbericht zeigt deutlich, dass unter Berücksichtigung der zu Grunde liegenden Ätiologie (labialer Wurzeltorque sowie einstrahlendes Frenulum labiale) eine Rezession Typ 1 allein durch Frenektomie und kieferorthopädische Maßnahmen stabil gedeckt werden kann. Dies ist gerade in Fällen mit den Therapieerfolg möglicherweise erschwerenden Allgemeinerkrankungen (wie Diabetes mellitus Typ I im vorliegenden Fall) einer plastisch-parodontalchirurgischen Intervention vorzuziehen.

Teeth with different chemical compositions can show vastly different physical properties, so knowledge of elemental composition is required to use animal teeth as substitutes for human teeth in research. In vitro, energy dispersive X-ray spectroscopy (EDX), improved by calibration standards and Si3N4-window material, enables determining local elemental compositions of inorganic and organic compounds without sample destruction. Six human molars, bovine incisors, murine incisors, and murine molars were analyzed. EDX-field scans and line scans were analyzed for elements Ca, P, O, C, N, F, Na, Mg, Fe, Cl, and S. Furthermore, Ca/P- and Ca/N-Ratios were calculated. The presence of iron in murine incisor enamel was investigated using additional wavelength dispersive X-ray spectroscopy measurements (WDX) near the enamel surface. Bovine and human enamel and dentin revealed close similarities regarding elemental composition. The median (25–75% percentiles) of At%Ca was 21.1 (20.8–21.3) in human enamel, 21.0 (20.7–21.2) in bovine enamel, and in murine enamel, 18.3 (17.85–18.88) for molars and 18.35 (18.00–18.75) for incisors. In dentin, murine teeth revealed a higher At%Ca compared to human and bovine teeth. Significant differences between human and bovine teeth were found for nitrogen in dentin, with a median of 4.5 (3.3–5) At%N for human dentin and 2.7 (2.3–3.2) At%N for bovine dentin. The Ca/P-Ratio was the highest in human and bovine enamel, which did not differ significantly. Enamel from murine molars had a higher Ca/P-Ratio than murine incisors and the highest Ca/P-Ratio in dentin was observed for human teeth and murine molars (1.49). WDX revealed iron in the outer 10 µm of pre- and post-eruptive enamel of murine incisors. Pre- and post-eruptive enamel on murine incisors only differed significantly in At%Ca (p = 0.041) and At%P (p = 0.026) with both At% higher in the pre-eruptive enamel. Murine teeth differ significantly from human and bovine teeth in terms of the elemental composition of enamel and dentin.

Objective In a cohort of 500 patients complaining about adverse effects from dental materials, allergies were found to be contributing to the patients’ subjective complaints in only about 14% of the cases. Therefore, the aim of this retrospective study was to investigate an enlarged cohort of 625 patients reporting on adverse effects from dental materials on non-allergy-related dental or orofacial findings with relevance for their subjective complaints. Methods 625 patients visiting a specialized consultation on suspected adverse effects from dental materials were characterized regarding age and sex distribution, subjective complaints, allergies, and dental and orofacial findings with relevance for their subjective complaints. Results This cohort comprised about 81% females and the median age was 58 years. The most often reported subjective complaints were burning mouth (43.8%), taste disorders (28.8%) and dry mouth (22.7%). Allergies toward dental materials were found in 12.3%. In 28.0% of the patients, no dental or orofacial findings with relevance for the subjective complaints expressed by the patients could be found. 19.8% of the patients exhibited relevant functional symptoms, 16.2% relevant orofacial diseases, 15.2% relevant mechanical irritations, 10.1% or 9.4% relevant tooth-related or plaque-related symptoms, respectively, 9.4% hyposalivation, and in 7.2% relevant manufacturing faults were found. Significance In patients complaining about adverse effects from dental materials, a wide variety of dental or orofacial findings need to be considered despite allergies, although a quarter of the patients did not present any relevant dental or orofacial finding. Therefore, specialized consultations and close collaboration with experts from other fields are eligible.

The oral biofilm is associated with the most common oral diseases such as caries, periodontitis, and peri-implantitis. It is also linked to failures of dental treatment approaches (eg, direct or indirect restorations because of adjacent caries). Therefore, the development of materials with antibacterial properties is desirable. However, the design of meaningful tests to confirm such properties faces severe problems because of the complexity of the interaction of materials with the oral biofilm. Furthermore, owing to practical reasons, such tests need to be performed in vitro. In contrast, there is a need for predictive data that are comparable between different laboratories. Therefore, standardization of such tests has been advocated. The International Organization for Standardization (ISO) with its Technical Committee 106–Dentistry maybetherelevant platform forthis purpose. A standard (ISO 3990) is being developed for testing the antibacterial properties of dental restorative materials. This standard defines basic requirements for sample preparation, selection of bacterial strains, test methods and assessment, and reporting of results. It is considered to be the first step, and regular revisions are planned as new scientific evidence emerges. The support of the scientific communities providing multidisciplinary input is needed. Key Words. Antibacterial; dental material; standardization; ISO standards; microbiology.

Orthodontic tooth movement is a complex process involving the remodeling of extracellular matrix and bone as well as inflammatory processes. During orthodontic treatment, sterile inflammation and mechanical loading favor the production of receptor activator of NF-κB ligand (RANKL). Simultaneously, expression of osteoprotegerin (OPG) is inhibited. This stimulates bone resorption on the pressure side. Recently, heat shock protein 27 (HSP27) was shown to be expressed in the periodontal ligament after force application and to interfere with inflammatory processes.We investigated the effects of phosphorylated HSP27 on collagen synthesis (COL1A2 mRNA), inflammation (IL1B mRNA, IL6 mRNA, PTGS2 protein) and bone remodeling (RANKL protein, OPG protein) in human periodontal ligament fibroblasts (PDLF) without and with transfection of a plasmid mimicking permanent phosphorylation of HSP27 using real-time quantitative polymerase chain reaction (RT-qPCR), western blot and enzyme-linked immunosorbent assays (ELISAs). Furthermore, we investigated PDLF-induced osteoclastogenesis after compressive strain in a co-culture model with human macrophages.In particular, phosphorylated HSP27 increased gene expression of COL1A2 and protein expression of PTGS2, while IL6 mRNA levels were reduced. Furthermore, we observed an increasing effect on the RANKL/OPG ratio and osteoclastogenesis mediated by PDLF.Phosphorylation of HSP27 may therefore be involved in the regulation of orthodontic tooth movement by impairment of the sterile inflammation response and osteoclastogenesis.HINTERGRUND: Die kieferorthopädische Zahnbewegung ist ein komplexer Prozess, der den Umbau der extrazellulären Matrix und des Knochens sowie entzündliche Prozesse umfasst. Während der kieferorthopädischen Behandlung begünstigen sterile Entzündungen und mechanische Belastungen die Produktion von RANKL („receptor activator of NF-κB ligand“). Gleichzeitig wird die Expression von OPG (Osteoprotegerin) gehemmt. Dies stimuliert die Knochenresorption auf der Druckseite. Kürzlich wurde gezeigt, dass das Hitzeschockprotein 27 (HSP27) im parodontalen Ligament nach Krafteinwirkung exprimiert wird und in die Entzündungsprozesse eingreift.Wir untersuchten die Auswirkungen von phosphoryliertem HSP27 auf die Kollagensynthese (COL1A2 mRNA), die Entzündung (IL1B mRNA, IL6 mRNA, PTGS2-Protein) und den Knochenumbau (RANKL-Protein, OPG-Protein) in humanen parodontalen Ligamentfibroblasten (PDLF) mittels RT-qPCR („real-time quantitative polymerase chain reaction“) Western Blot und ELISAs („enzyme-linked immunosorbent assays“), ohne und mit Transfektion eines Plasmids, das die permanente Phosphorylierung von HSP27 nachahmt. Darüber hinaus untersuchten wir die durch PDLF induzierte Osteoklastogenese nach Druckbelastung in einem Kokulturmodell mit humanen Makrophagen.Das phosphorylierte HSP27 erhöhte die Genexpression von COL1A2 und die Proteinexpression von PTGS2, während die IL6-mRNA-Spiegel reduziert wurden. Außerdem beobachteten wir eine steigernde Wirkung auf das RANKL/OPG-Verhältnis und die durch PDLF vermittelte Osteoklastogenese.Die Phosphorylierung von HSP27 könnte daher an der Regulierung der kieferorthopädischen Zahnbewegung durch Beeinträchtigung der sterilen Entzündungsreaktion und der Osteoklastogenese beteiligt sein.

The emergence of the Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) represents an unprecedented threat for the human population, necessitating rapid and effective intervention measures. Given the main infection route by airborne transmission, significant attention has been bestowed upon the use of antiseptic mouthrinses as a way to possibly reduce infectious viral titers. However, clinical evaluations are still sparse. Thus, we evaluated a wide variety of antiseptic agents that can be used as mouthrinses for their antiviral effects in vitro and their respective mode of action. One of the most promising antiseptic agents (benzalkoniumchloride, BAC) was used in a randomized placebo-controlled clinical trial with subsequent analysis of viral loads by RT-qPCR and virus rescue in cell culture. Mechanistic analysis revealed that treatment with BAC and other antiseptic agents efficiently inactivated SARS-CoV-2 in vitro by primarily disrupting the viral envelope, without affecting viral RNA integrity. However, the clinical application only resulted in a mild reduction of viral loads in the oral cavity. These results indicate that gargling with mouthrinses comprising single antiseptic agents may play a minor role towards a potential reduction of transmission rates and thus, these findings are of utmost importance when considering alternative COVID-19 prevention strategies.

The extracellular matrix is a critical component of microbial biofilms, such as dental plaque, maintaining the spatial arrangement of cells and coordinating cellular functions throughout the structure. The extracellular polymeric substances that comprise the matrix include carbohydrates, nucleic acids, proteins, and lipids, which are frequently organized into macromolecular complexes and/or are associated with the surfaces of microbial cells within the biofilm. Cariogenic dental plaque is rich in glucan and fructan polysaccharides derived from extracellular microbial metabolism of dietary sucrose. By contrast, the matrix of subgingival dental plaque is a complex mixture of macromolecules that is still not well understood. Components of the matrix escape from microbial cells during lysis by active secretion or through the shedding of vesicles and serve to anchor microbial cells to the tooth surface. By maintaining the biofilm in close association with host tissues, the matrix facilitates interactions between microorganisms and the host. The outcome of these interactions may be the maintenance of health or the development of dental disease, such as caries or periodontitis. The matrix affords microbial cells protection against chemical and physical insults and hinders the eradication of pathogenic dental plaque. Therefore, strategies to control the matrix are critical to maintain oral health. This review discusses recent advances in our understanding of the composition, origins, and function of the dental plaque matrix, with a focus on subgingival dental plaque. New strategies to control subgingival dental plaque based on targeting the biofilm matrix are also considered.

Objectives In the context of the phase-down of amalgam, development of easily applicable, permanent restorative materials is of high clinical interest. Aim of this study was to evaluate the clinical performance of a novel, tooth-colored, self-adhesive bulk-fill restorative (SABF, 3M Oral Care) and a conventional bulk-fill composite (Filtek One, 3M Oral Care; FOBF) for restoring class II cavities. The null-hypothesis tested was that both materials perform similar regarding clinical performance. Materials and methods In this randomized split-mouth study, 30 patients received one SABF and one FOBF restoration each. Scotchbond Universal (3M Oral Care) was used as adhesive for FOBF (self-etch mode), while SABF was applied directly without adhesive. Restorations were evaluated by two blinded examiners at baseline, 6 months and 12 months employing FDI criteria. Non-parametric statistical analyses and χ2-tests (α = 0.05) were applied. Results Thirty patients (60 restorations) were available for the 6- and 12-month recalls exhibiting 100% restoration survival. All restorations revealed clinically acceptable FDI scores at all time points and for all criteria. Only regarding esthetic properties, FOBF performed significantly better than SABF regarding surface lustre (A1) and color match and translucency (A3) at all time points and marginal staining (A2b) at 12 months. Conclusions The null-hypothesis could not be rejected. Both materials performed similarly regarding clinical performance within the first year of clinical service. SABF exhibited slightly inferior, but clinically fully acceptable esthetic properties as compared to FOBF. Clinical relevance Within the limitations of this study, the self-adhesive bulk-fill restorative showed promising results and may be recommended for clinical use.

Helicobacter pylori is associated with chronic gastritis, gastric or duodenal ulcers, and gastric cancer. Since the oral cavity is the entry port and the first component of the gastrointestinal system, the oral cavity has been discussed as a potential reservoir of H. pylori. Accordingly, a potential oral-oral transmission route of H. pylori raises the question concerning whether close contact such as kissing or sharing a meal can cause the transmission of H. pylori. Therefore, this topic has been investigated in many studies, applying different techniques for detection of H. pylori from oral samples, i.e. molecular techniques, immunological or biochemical methods and traditional culture techniques. While molecular, immunological or biochemical methods usually yield high detection rates, there is no definitive evidence that H. pylori has ever been isolated from the oral cavity. The specificity of those methods may be limited due to potential cross-reactivity, especially with H. pylori-like microorganisms such as Campylobacter spp. Furthermore, the influence of gastroesophageal reflux has not been investigated so far. This review aims to summarize and critically discuss previous studies investigating the potential colonization of H. pylori in the oral cavity and suggest novel research directions for targeting this critical research question.

Interfaces between dentin, enamel and luting agents were characterized using low vacuum Scanning Electron Microscopy (SEM). After smear layer creation, one of three luting agents (RelyX Unicem 2, Clearfil SA Cement and Panavia F 2.0/ED Primer II) was applied on 60 enamel-dentin specimens and dual-cured or self-cured. Specimens were polished (Experiment 1) and subsequently demineralized and deproteinized (Experiment 2). Adhesive interfaces were analyzed (low vacuum SEM, ×3000). Presence of an interdiffusion zone, tag-like structures (dentin) and marginal gaps (enamel) were assessed. Non-parametrical tests (χ2-test, α = 0.05) were performed. The first null-hypothesis was that the adhesive interface micromorphology between enamel and dentin and self-adhesive resin cements (SARCs) is similar with conventional resin cement used with a self-etch adhesive (CRC+SE). The second null-hypothesis was that the micromorphology is not influenced by curing modes. Interdiffusion zones and tag-like structures (dentin) were observed more frequently for CRC+SE compared to SARCs. For each luting agent, there was a non-significant (p &gt, 0.05) tendency for interdiffusion zone and tag-like structures detectable in more specimens after self-curing compared to dual-curing. Marginal gaps (enamel) were found only for SARCs. The first null-hypothesis was not rejected fully: Tag-like structures and interdiffusion zones in dentin were found for CRC+SE and SARCs. The second null-hypothesis was not rejected.

Objectives To determine the clinical performance of partial ceramic crowns (PCCs) luted with a conventional resin cement combined with a universal adhesive without or with selective enamel etching or luted with a self-adhesive resin cement. Methods In a split-mouth design, each three CAD/CAM-PCCs (Vita Mark II, Cerec) were placed in 50 patients. Two PCCs were luted with a conventional resin cement (RelyX Ultimate) combined with a universal adhesive (Scotchbond Universal) without (SB-E) or with (SB+E) selective enamel etching. The third PCC was luted with a self-adhesive resin cement (RelyX Unicem 2; RXU). Chi-square tests (�����0.05) were applied. Based on clinical failures (complete debonding or need for replacement of the restorations), Kaplan-Meier survival analysis was performed. Results 31 patients were evaluated clinically using FDI criteria at 39 months. Clinically acceptable results were detected over time, except for "fracture of material and retention" (inacceptable fractures and debondings). Within materials, statistically significant differences (p�������0.003) between baseline and 39 months were found for "marginal adaptation" and "marginal staining". At 39-month, SB+E and SB-E showed significantly better results compared to RXU in "marginal adaptation"(p�������0.021) and "marginal staining"(p�������0.013). Kaplan-Meier analysis showed higher survival rates after 39 months for SB+E (96%) and SB-E (88%) compared to RXU (69%) with statistically significant differences between RXU vs. SB-E (p��=��0.022) and RXU vs. SB+E (p�������0.001). Conclusions After 39-months, PCCs luted with the self-adhesive resin cement exhibited a statistically significant inferior survival rate compared to restorations luted with the conventional resin cement combined with a universal adhesive without or with selective enamel etching. Clinical significance Currently, self-adhesive resin cements cannot be recommended for luting partial ceramic crowns. However, the standard adhesive luting procedure comprising a universal adhesive and luting composite yielded good clinical results for more than 3 years irrespectively of application of a selective enamel etching step.

The antimicrobial photodynamic therapy (aPDT) is a promising approach for the control of microbial and especially fungal infections such as mucosal mycosis. TMPyP [5,10,15, 20-tetrakis(1-methylpyridinium-4-yl)-porphyrin tetra p-toluenesulfonate] is an effective photosensitizer (PS) that is commonly used in aPDT. The aim of this study was to examine the localization of TMPyP in Candida albicans before and after irradiation with visible light to get information about the cellular mechanism of antifungal action of the photodynamic process using this PS. Immediately after incubation of C. albicans with TMPyP, fluorescence microscopy revealed an accumulation of the PS in the cell envelope. After irradiation with blue light the complete cell showed red fluorescence, which indicates, that aPDT is leading to a damage in the cell wall with following influx of PS into the cytosol. Incubation of C. albicans with Wheat Germ Agglutinin (WGA) could confirm the cell wall as primary binding site of TMPyP. The finding that the porphyrin accumulates in the fungal cell wall and does not enter the interior of the cell before irradiation makes it unlikely that resistances can emerge upon aPDT. The results of this study may help in further development and modification of PS in order to increase efficacy against fungal infections such as those caused by C. albicans.

Biofilm formation depends on many factors, one of them being the surface (substrate) on which the biofilm is formed, and dental restorative materials are such substrates. Biofilms play a crucial role for caries formation and inflammation of gingival, periodontal, or mucosal tissues next to restorations. Even general health problems such as systemic infections in immunocompromised patients may result from biofilms on dental materials (e.g., on dentures). Furthermore, biofilms may change material or surface properties. Biofilms on restorative materials have been investigated by several in vitro, in situ, and in vivo methods measuring a large number of different endpoints. Basically, datasets obtained from different methodological approaches are most suitable for final assessments. While surface properties like wettability or surface free energy (SFE) influence biofilm formation to a certain extent, the most relevant surface properties are material roughness followed by surface chemistry. The pellicle, which is formed rapidly on restorations after in vivo exposure, masks or levels off the influence of surface properties like wettability or SFE on biofilm formation. The prevention of biofilm formation is mainly based on general oral hygiene regimens. Furthermore, optimal polishing of restorative materials is instrumental. Several antimicrobial substances have been incorporated into restorative materials, which act by being released or as surface repellents. However, the optimal biofilm-preventive restorative material has not been found so far. New approaches in this context should aim at: (1) better understanding the role of the biofilm matrix (extracellular polymeric substance), and (2) implementing ecology-based approaches for the modification of dysbiotic disease-associated biofilms.

Objectives SARS-CoV-2 is mainly transmitted by inhalation of droplets and aerosols. This puts healthcare professionals from specialties with close patient contact at high risk of nosocomial infections with SARS-CoV-2. In this context, preprocedural mouthrinses with hydrogen peroxide have been recommended before conducting intraoral procedures. Therefore, the aim of this study was to investigate the effects of a 1% hydrogen peroxide mouthrinse on reducing the intraoral SARS-CoV-2 load. Methods Twelve out of 98 initially screened hospitalized SARS-CoV-2-positive patients were included in this study. Intraoral viral load was determined by RT-PCR at baseline, whereupon patients had to gargle mouth and throat with 20 mL of 1% hydrogen peroxide for 30 s. After 30 min, a second examination of intraoral viral load was performed by RT-PCR. Furthermore, virus culture was performed for specimens exhibiting viral load of at least 103 RNA copies/mL at baseline. Results Ten out of the 12 initially included SARS-CoV-2-positive patients completed the study. The hydrogen peroxide mouthrinse led to no significant reduction of intraoral viral load. Replicating virus could only be determined from one baseline specimen. Conclusion A 1% hydrogen peroxide mouthrinse does not reduce the intraoral viral load in SARS-CoV-2-positive subjects. However, virus culture did not yield any indication on the effects of the mouthrinse on the infectivity of the detected RNA copies. Clinical relevance The recommendation of a preprocedural mouthrinse with hydrogen peroxide before intraoral procedures is questionable and thus should not be supported any longer, but strict infection prevention regimens are of paramount importance. Trial registration German Clinical Trials Register (ref. DRKS00022484)

Antimicrobial resistance is a serious issue for public health care all over the world. While resistance toward antibiotics has attracted strong interest among researchers and the general public over the last 2 decades, the directly related problem of resistance toward antiseptics and biocides has been somewhat left untended. In the field of dentistry, antiseptics are routinely used in professional care, but they are also included in lots of oral care products such as mouthwashes or dentifrices, which are easily available for consumers over-the-counter. Despite this fact, there is little awareness among the dental community about potential risks of the widespread, unreflected, and potentially even needless use of antiseptics in oral care. Cetylpyridinium chloride (CPC), a quaternary ammonium compound, which was first described in 1939, is one of the most commonly used antiseptics in oral care products and included in a wide range of over-the-counter products such as mouthwashes and dentifrices. The aim of the present review is to summarize the current literature on CPC, particularly focusing on its mechanism of action, its antimicrobial efficacy toward biofilms, and on potential risks of resistance toward this antiseptic as well as underlying mechanisms. Furthermore, this work aims to raise awareness among the dental community about the risk of resistance toward antiseptics in general.

Objectives The aims of this study were to investigate the antimicrobial efficacy of antiseptics in saliva-derived microcosm biofilms, and to examine phenotypic adaption of bacteria upon repeated exposure to sub-inhibitory antiseptic concentrations. Methods Saliva-derived biofilms were formed mimicking caries- or gingivitis-associated conditions, respectively. Microbial compositions were analyzed by semiconductor-based 16S rRNA sequencing. Biofilms were treated with CHX, CPC, BAC, ALX, and DQC for 1 or 10 min, and colony forming units (CFU) were evaluated. Phenotypic adaptation of six selected bacterial reference strains toward CHX, CPC, and BAC was assessed by measuring minimum inhibitory concentrations (MICs) over 10 passages of sub-inhibitory exposure. Protein expression profiles were investigated by SDS-PAGE. Results Both biofilms showed outgrowth of streptococci and Veillonella spp., while gingivitis biofilms also showed increased relative abundances of Actinomyces, Granulicatella, and Gemella spp. Antiseptic treatment for 1 min led to no relevant CFU-reductions despite for CPC. When treated for 10 min, CPC was most effective followed by BAC, ALX, CHX, and DQC. Stable adaptations with up to fourfold MIC increases were found in E. coli toward all tested antiseptics, in E. faecalis toward CHX and BAC, and in S. aureus toward CPC. Adapted E. coli strains showed different protein expression as compared with the wildtype strain. Conclusion Antiseptics showed limited antimicrobial efficacy toward mature biofilms when applied for clinically relevant treatment periods. Bacteria showed phenotypic adaptation upon repeated sub-inhibitory exposure. Clinical relevance Clinicians should be aware that wide-spread use of antiseptics may pose the risk of inducing resistances in oral bacteria.

Biofilm formation depends on many factors, one of them being the surface (substrate) on which the biofilm is formed, and dental restorative materials are such substrates. Biofilms play a crucial role for caries formation and inflammation of gingival, periodontal, or mucosal tissues next to restorations. Even general health problems such as systemic infections in immunocompromised patients may result from biofilms on dental materials (e.g., on dentures). Furthermore, biofilms may change material or surface properties. Biofilms on restorative materials have been investigated by several in vitro, in situ, and in vivo methods measuring a large number of different endpoints. Basically, datasets obtained from different methodological approaches are most suitable for final assessments. While surface properties like wettability or surface free energy (SFE) influence biofilm formation to a certain extent, the most relevant surface properties are material roughness followed by surface chemistry. The pellicle, which is formed rapidly on restorations after in vivo exposure, masks or levels off the influence of surface properties like wettability or SFE on biofilm formation. The prevention of biofilm formation is mainly based on general oral hygiene regimens. Furthermore, optimal polishing of restorative materials is instrumental. Several antimicrobial substances have been incorporated into restorative materials, which act by being released or as surface repellents. However, the optimal biofilm-preventive restorative material has not been found so far. New approaches in this context should aim at: (1) better understanding the role of the biofilm matrix (extracellular polymeric substance), and (2) implementing ecology-based approaches for the modification of dysbiotic disease-associated biofilms.

Objectives The non-steroidal anti-inflammatory drug etoricoxib is the most highly selective inhibitor of cyclooxygenase-2 available (344:1) and has been approved for postoperative pain therapy following dental interventions in Europe. At clinically relevant doses it has been reported to only have marginal effects on the velocity of orthodontic tooth movement (OTM). Its effects on associated dental root resorptions, osteoclastogenesis, trabecular number in the alveolar bone and periodontal bone loss during OTM, however, have not yet been investigated. Material and methods 40 male Fischer344 rats were divided into four groups: 1.5 ml tap water/day p.o. (control, 1), additional 7.8 mg/kg/day etoricoxib (normal dose) for three (2) or seven (3) days/week and 13.1 mg/kg/day (high dose) for seven days/week, respectively (4). After a week of premedication, OTM in anterior direction of the first left upper molar was performed for 28 days by means of a nickel-titanium coil spring (0.25 N). We quantified OTM-associated dental root resorptions, osteoclastogenesis, trabecular number and periodontal bone loss by histomorphometrical, histochemical and μCT analyses of the disected tooth-bearing upper jaw sections. Results After 28 days of OTM, associated reduction of trabecular number seemed to be slightly alleviated by high doses of etoricoxib, whereas no significant other etoricoxib effects in the doses administered could be detected regarding OTM-induced or -associated dental root resorptions, osteoclastogenesis or periodontal bone loss. Conclusions Dental root resorptions, osteoclastogenesis and periodontal bone loss during OTM in rats were not significantly affected by etoricoxib in the clinically relevant dosages investigated with only a slight inhibitory effect on bone remodelling to be expected at high dosages. Etoricoxib is therefore not suitable for the prevention of these detrimental effects, but could be a suitable analgesic during OTM, as it has been reported not to affect tooth movement.

OBJECTIVES The aims of this study were (i) to assess cumulative survival rates of class II resin-based composite and compomer restorations in primary molars with a 5-year observation period and (ii) to analyze the influence of different types of anesthesia and different localizations of the restorations in the teeth. METHODS Patient charts of a private practice for pediatric dentistry were screened for class II resin-based composite (Spectrum TPH3) and compomer (Dyract Posterior; both Dentsply DeTrey) restorations in primary molars with a 5-year observation period used with Adper Prompt L-Pop (3M-ESPE). One restoration per patient (age ≤ 6 years at placement) was randomly selected. RESULTS Two hundred sixty restorations were included (43% resin-based composites, 57% compomers). After 5 years, cumulative survival rates were 43% for resin-based composite and 49% for compomer restorations with no statistically significant differences. There was a tendency for higher survival rates for restorations placed under N2O inhalation sedation or general anesthesia. Distal-occlusal compomer restorations showed significantly lower survival rates (p = 0.003) as compared to mesial-occlusal compomer restorations. CONCLUSION Within the limitations of the study, we conclude that type of restorative material as well as the type of anesthesia do not influence restoration survival rates, although restorations placed in patients receiving N2O inhalation sedation or general anesthesia tend to perform better as compared with patients receiving no anesthesia or only local infiltration. CLINICAL RELEVANCE Resin-based composite and compomer restorations show similar survival rates of more than 43% (annual failure rates less than 11.5%) after 5 years for restoration of primary molars.

AIM To investigate tooth survival and clinical long-term outcomes up to 26 years following guided tissue regeneration (GTR) therapy in deep intra-bony defects. METHODS Patients from three prospective clinical split-mouth studies, which investigated the outcomes of GTR therapy, were re-evaluated 21-26 years after surgery independent of the membrane type used, and tooth survival was assessed according to several site-specific and patient-related factors. RESULTS About 50 patients contributing 102 defects were available for this long-term follow-up. After up to 26 years (median 23.3 years), 52.9% of the teeth were still in situ. The median survival of the extracted teeth was 13.8 years. Patients with diabetes mellitus and/or smoking history lost significantly more teeth in the long term. Compared to the 1-year situation, there was no new median CAL loss after up to 26 years in the teeth which were still in situ. CONCLUSIONS Within the limitations of this study, our data show that more than 50% of the initially seriously diseased teeth were still in situ up to 26 years following GTR therapy despite an overall limited adherence to SPT. In the majority of these teeth, the CAL gain 1 year after GTR could be maintained over this long period.

Background Synthetic particulate hydroxyapatite (HAP; Ca5(PO4)3(OH)) is used as ingredient in oral care products but its effects on cariogenic biofilms are not clear yet. The primary mode of action of HAP may be acting as a calcium phosphate reservoir when deposited in oral biofilms and release Ca2+ and (hydrogen) phosphate ions upon bacterial acid challenge. The aim of this in vitro study was to test this hypothesis by investigating release of Ca2+ ions and potential buffering effects from HAP upon bacterial acid challenge in planktonic cultures and biofilms of Streptococcus mutans. Methods Planktonic cultures of S. mutans were grown in BHI broth with 1% sucrose or with additional 5% HAP or 5% silica for up to 48 h. Separately, biofilms of S. mutans were grown in BHI for 72 h in total. After 24 h of this biofilm culture, either BHI alone or BHI with additional 0.5% HAP or 0.5% silica was added. After 48 h, BHI with 1% sucrose was added to allow bacterial acid formation. Ca2+ release was determined colorimetrically and pH measurements were performed using a pH electrode. For statistical analysis, non-parametrical procedures were applied (n ≥ 10; Mann-Whitney U test; α = 0.05). Results Relevant release of Ca2+ was only evident in planktonic cultures or biofilms with HAP but not in both other groups (p ≤ 0.001). In suspended biofilms with HAP, median pH was 4.77 after 72 h and about 0.5 pH units higher as compared to both other groups (4.28 or 4.32, respectively; p ≤ 0.001). Conclusions Under the tested conditions, synthetic HAP releases Ca2+ ions upon bacterial acid challenge and may also show some buffering capacity but further studies are needed to investigate whether the concentrations tested here can also be reached clinically in dental biofilms.

Considering increasing number of pathogens resistant towards commonly used antibiotics as well as antiseptics, there is a pressing need for antimicrobial approaches that are capable of inactivating pathogens efficiently without the risk of inducing resistances. In this regard, an alternative approach is the antimicrobial photodynamic therapy (aPDT). The antimicrobial effect of aPDT is based on the principle that visible light activates a per se non-toxic molecule, the so-called photosensitizer (PS), resulting in generation of reactive oxygen species that kill bacteria unselectively via an oxidative burst. During the last 10–20 years, there has been extensive in vitro research on novel PS as well as light sources, which is now to be translated into clinics. In this review, we aim to provide an overview about the history of aPDT, its fundamental photochemical and photophysical mechanisms as well as photosensitizers and light sources that are currently applied for aPDT in vitro. Furthermore, the potential of resistances towards aPDT is extensively discussed and implications for proper comparison of in vitro studies regarding aPDT as well as for potential application fields in clinical practice are given. Overall, this review shall provide an outlook on future research directions needed for successful translation of promising in vitro results in aPDT towards clinical practice.

Objectives To evaluate the clinical performance of two flowable composites for restoring Class-V non-carious cervical lesions (NCCLs), one with novel (ND; N’Durance ® Dimer Flow, Septodont) and one with modified conventional matrix composition (FS; Filtek™ Supreme XTE Flow, 3M-ESPE). The null hypothesis was that both flowable composites perform equally regarding clinical quality and survival. Methods 50 patients received one ND and one FS restoration of NCCLs in premolars using Clearfil Protect Bond (Kuraray) as an adhesive. Restorations were evaluated by two examiners at baseline (BL), 18 and 36 months employing FDI criteria. Non-parametric statistical analyses and χ 2 tests were applied ( α = 0.05). Results 48 patients with both restorations under risk participated in the 36-mo recall. One patient terminated participation after the 18-mo recall. One ND restoration failed at the 18-mo recall (fracture). One FS restoration failed during clinical examination at the 36-mo recall (debonding). 95.8% of restorations each were rated clinically acceptable at 36-mo. No significant differences for all selected FDI criteria were recorded between ND and FS at each examination time point except for the criteria surface staining at 36-mo and marginal staining at 18-mo and 36-mo, where FS showed significantly better results. For each material, no significant differences over time were detected, except for loss of surface lustre for FS (BL to 18 months). Significance Within the limitations of the study, the null hypothesis that materials perform equally could not be rejected. Both flowable composites performed equally regarding survival and similarly regarding clinical performance.