Search

Numerous redox transformations that are essential to life are catalyzed by metalloenzymes that feature Earth-abundant metals. In contrast, platinum-group metals have been the cornerstone of many industrial catalytic reactions for decades, providing high activity, thermal stability, and tolerance to chemical poisons. We assert that nature's blueprint provides the fundamental principles for vastly expanding the use of abundant metals in catalysis. We highlight the key physical properties of abundant metals that distinguish them from precious metals, and we look to nature to understand how the inherent attributes of abundant metals can be embraced to produce highly efficient catalysts for reactions crucial to the sustainable production and transformation of fuels and chemicals.

We report the discovery that a perhydroxylated dodecaborate cluster ([B12(OH)12]2-) can act as an inorganic polyol, serving as a molecular cross-linker in the synthesis of polyurethane-based materials. We further demonstrate how the inherent robustness of the utilized boron cluster can effectively enhance the thermal stability of the produced polyurethane materials incorporating [B12(OH)12]2- building blocks compared to analogous polymers made from carbon-based polyols. Ultimately, this approach provides a potential route to tune the chemical and physical properties of soft materials through incorporation of polyhedral boron-rich clusters into the polymer network.

Four metalloporphyrinic metal–organic frameworks (MOFs) were successfully synthesized and exhibited enhanced activities for the photooxidation of a sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES). Among them, a Sn-porphyrin functionalized 2D MOF, namely CSLA-21-NH2(Sn), showed a half-life of 1.5 min for CEES oxidation under blue LED, featuring as one of the fastest photocatalysts for CEES degradation. [ABSTRACT FROM AUTHOR]

The isoreticular expansion and functionalization of charged-polarized porosity has been systematically explored by the rational design of 11 isostructural zwitterionic metal-organic frameworks (ZW-MOFs). This extended series of general structural composition {[M3F(L1)3(L2)1.5]·guests}n was prepared by employing the solvothermal reaction of Co and Ni tetrafluoroborates with a binary ligand system composed of zwitterionic pyridinium derivatives and traditional functionalized ditopic carboxylate auxiliary ligands (HL1·Cl = 1-(4-carboxyphenyl)-4,4′-bipyridinium chloride, Hcpb·Cl; or 1-(4-carboxyphenyl-3-hydroxyphenyl)-4,4′-bipyridinium chloride, Hchpb·Cl; and H2L2 = benzene-1,4-dicarboxylic acid, H2bdc; 2-aminobenzene-1,4-dicarboxylic acid, H2abdc; 2,5-dihydroxy-1,4-benzenedicarboxylic acid, H2dhbdc; biphenyl-4,4′-dicarboxylic acid, H2bpdc; or stilbene-4,4′-dicarboxylic acid, H2sdc). Single-crystal structure analyses revealed cubic crystal symmetry (I-43m, a = 31-36 Å) with a 3D pore system of significant void space (73-81%). The pore system features three types of pores being systematically tunable in size ranging from 17.4 to 18.8 Å (pore I), 8.2 to 12.8 Å (pore II), and 4.8 to 10.4 Å (pore III) by the choice of auxiliary ligands. All members of this series have noninterpenetrating structures and exhibit robust architectures, as evidenced by their permanent porosity and high thermal stability (up to 300 °C). The structural integrity and specific surface areas could be systematically optimized using supercritical CO2 exchange methods for framework activation resulting in BET surface areas ranging from 1250 to 2250 m2/g. Most interestingly, as a structural landmark, we found the pore surfaces lined with charge gradients employed by the pyridinium ligands. This key feature results in significant adsorption of carbon dioxide and methane which is attributed to polarization effects. With this contribution we pioneer the reticulation of pyridinium building blocks into extended zwitterionic networks in which specific properties can be targeted.

Computational high-throughput screening was carried out to assess a large number of experimentally reported metal-organic frameworks (MOFs) and zeolites for their utility in hexane isomer separation. Through the work, we identified many MOFs and zeolites with high selectivity (SL+M > 10) for the group of n-hexane, 2-methylpentane, and 3-methylpentane (linear and monobranched isomers) versus 2,2-dimethylbutane and 2,3-dimethylbutane (dibranched isomers). This group of selective sorbents includes VICDOC (Fe2(BDP)3), a MOF with triangular pores that is known to exhibit high isomer selectivity and capacity. For three of these structures, the adsorption isotherms for a 10-component mixture of hexane and heptane isomers were calculated. Subsequent simulations of column breakthrough curves showed that the DEYVUA MOF exhibits a longer process cycle time than VICDOC MOF or MRE zeolite, which are previously reported, high-performing materials, illustrating the importance of capacity in designing MOFs for practical applications. Among the identified candidates, we synthesized and characterized a MOF in a new copper form with high predicted adsorbent capacity (qL+M > 1.2 mol/L) and moderately high selectivity (SL+M ≈ 10). Finally, we examined the role of pore shape in hexane isomer separations, especially of triangular-shaped pores. We show through the potential energy surface and three-dimensional siting analyses that linear alkanes do not populate the corners of narrow triangular channels and that structures with nontriangular pores can efficiently separate hexane isomers. Detailed thermodynamic analysis illustrates how differences in the free energy of adsorption contribute to shape-selective separation in nanoporous materials.

Global reliance on fossil fuel combustion for energy production has contributed to the rising concentration of atmospheric CO2, creating significant global climate challenges. In this regard, direct air capture (DAC) of CO2 from the atmosphere has emerged as one of the most promising strategies to counteract the harmful effects on the environment, and the further development and commercialization of this technology will play a pivotal role in achieving the goal of net‐zero emissions by 2050. Among various DAC adsorbents, metal–organic frameworks (MOFs) show great potential due to their high porosity and ability to reversibly adsorb CO2 at low concentrations. However, the adsorption efficiency and cost‐effectiveness of these materials must be improved to be widely deployed as DAC sorbents. To that end, this perspective provides a critical discussion on several types of benchmark MOFs that have demonstrated high CO2 capture capacities, including an assessment of their stability, CO2 capture mechanism, capture‐release cycling behavior, and scale‐up synthesis. It then concludes by highlighting limitations that must be addressed for these MOFs to go from the research laboratory to implementation in DAC devices on a global scale so they can effectively mitigate climate change. [ABSTRACT FROM AUTHOR]

Some metal organic frameworks (MOFs) incorporate nodes that are nanoscale metal oxides, and the hydroxy-containing functional groups on them provide opportunities for introducing catalytic sites with precisely defined structures. Investigations have been done to understand the structures of these groups on nodes and node vacancies, because, in prospect, atomic-scale modulation of the composition, areal density, and/or siting of the groups would open up possibilities for exquisite tuning of the siting and performance of subsequently anchored catalytic units (e.g., single metal ions, pairs of metal ions, or well-defined metal-ion-containing clusters). We have combined infrared (IR) spectroscopy and density functional theory (DFT) to demonstrate tuning of these sites, namely, hydrogen-bonded OH/OH2 groups on the Zr6 nodes of the MOFs UiO-66 and NU-1000 via the intermediacy of node methoxy (or ethoxy) groups formed from methanol (or ethanol). Methoxy (or ethoxy) groups on node vacancy sites are converted to a structure incorporating one vacant Zr site and one terminal OH group per face by reaction with water. Our results highlight how the combination of DFT and IR spectroscopy facilitates the determination of the identity and chemistry of the functional groups on MOF node vacancies and defect sites.

The Zr6 nodes of the metal-organic frameworks (MOFs) UiO-66 and UiO-67 are metal oxide clusters of atomic precision and can be used as catalyst supports. The bonding sites on these nodes - that is, hydrogen-bonded H2O/OH groups on UiO-67 and non-hydrogen-bonded terminal OH groups on UiO-66 - were regulated by modulation of the MOF syntheses. Ir(C2H4)2(C5H7O2) complexes reacted with these sites to give site-isolated Ir(C2H4)2 complexes, each anchored to the node by two Ir-Onode bonds. The supported iridium complexes on these sites have been characterized by infrared (IR) and extended X-ray absorption fine structure (EXAFS) spectroscopies and density functional theory calculations. The ethylene ligands on iridium are readily replaced by CO, and the νCO frequencies of the resultant complexes and those of comparable complexes reported elsewhere show that the support electron-donor tendencies increase in the order HY zeolite 蠐 UiO-66 < UiO-67 (= NU-1000) < ZrO2 < MgO. The sharpness of the IR νCO bands shows that the degree of uniformity of the support bonding sites decreases in the order ZrO2 ≈ UiO-67 ≈ NU-1000 < MgO < UiO-66 蠐 HY zeolite. The reactivity of supported Ir(CO)2 complexes with C2H4 to form Ir(C2H4)(CO) and Ir(C2H4)2(CO) is influenced by the support electron-donor properties, with the reactivity increasing in the order MgO = ZrO2 = NU-1000 (not reactive) < UiO-66 < UiO-67 蠐 HY zeolite. Density functional theory calculations characterizing the complexes supported on NU-1000, UiO-66/67, and HY zeolite concur with the use of the calculated νCO bands as indicators of electron-donor properties of the supported metal catalysts. Our calculations also show that the reactivity of the supported Ir(CO)2 complexes with C2H4 is correlated with the electron-donor properties of the iridium center. The supported Ir(C2H4)2 samples are precatalysts for ethylene hydrogenation and ethylene dimerization, with the activity for each reaction increasing with increasing electron-withdrawing strength of the support.

Metal-organic frameworks with Zr6 nodes, UiO-66 and NU-1000, were investigated as supports for Ir(CO)2 and Ir(C2H4)2 complexes. A single bonding site for the iridium is identified on the nodes of NU-1000, whereas two sites are identified on UiO-66, although at low iridium loadings only one site is occupied. Density functional theory calculations provide structural results that are in good agreement with infrared and X-ray absorption fine-structure spectra. The reactivity of node-supported Ir(CO)2 with C2H4 and the catalytic activity and selectivity of the species initially present as Ir(C2H4)2 for ethylene hydrogenation and dimerization were investigated both experimentally and computationally and shown to be strongly influenced by the node.