Search

The lag in quantitative methods and detection techniques for geologic information has resulted in time-consuming and human-experienced geologic analysis in tunnels. Geochemical indicators of rocks can be used to identify adverse geology and to explain the intrinsic causes of damage to normal rocks. This study proposes a method to identify adverse geology by extracting and imaging the indicator elements. The mapping relationship between rock components and geologic bodies is quickly determined by indicator element extraction based on factor analysis, and then the data are gridded for image output. The location and size of the target adverse geology are visually identified through the distribution images of the indicator elements, thus reducing data dimensions and analysis time. A non-destructive, in-situ and fast element detection technique in tunnels was adopted to speed up the process of geology identification. The accuracy of the detection was validated by comparing field and laboratory test results. This study further confirms and refines the previous research, and the results provide references for geological, mining and underground projects.

To reinforce natural rubber latex foam, fumed silica and precipitated silica are introduced into latex foam prepared using the Dunlop process as fillers. Four types of silica, including Aerosil 200 (hydrophilic fumed silica), Reolosil DM30, Aerosil R972 (hydrophobic fumed silica), and Sipernat 22S (precipitated silica), are investigated. The latex foam with added silica presents better mechanical and physical properties compared with the non-silica foam. The hydrophobic nature of the fumed silica has better dispersion in natural rubber compared to hydrophilic silica. The specific surface area of silica particles (BET) also significantly influences the properties of the latex foam, with larger specific surface areas resulting in better dispersity in the rubber matrix. It was observed that exceeding 2 phr led to difficulties in the foaming process (bulking). Furthermore, higher loading of silica also affected the rubber foam, resulting in an increased shrinkage percentage, hardness, compression set, and crosslink density. The crosslink density increased from 11.0 ± 0.2 mol/cm3 for non-silica rubber to 11.6 ± 0.6 mol/cm3 for Reolosil DM30. Reolosil DM30 also had the highest hardness, with a hardness value of 52.0 ± 2.1 IRHD, compared to 45.0 ± 1.3 IRHD for non-silica foam rubber and 48 ± 2.4 IRHD for hydrophilic fumed silica Aerosil 200. Hydrophobic fumed silica also had the highest ability to return to its original shape, with a recovery percentage of 88.0% ± 3.5% compared to the other fumed silica. Overall, hydrophobic fumed silica had better results than hydrophilic silica in both fumed and precipitated silica.

The demodulation phase error will cause the quadrature error to be coupled to the rate output, resulting in performance deterioration of the MEMS gyroscope. To solve this problem, an in-run automatic demodulation phase error compensation method is proposed in this paper. This method applies square wave angular rate input to the gyroscope and automatically identifies the value of the demodulation phase error through the designed automatic identification algorithm. To realize in-run automatic compensation, the demodulation phase error corresponding to the temperature point is measured every 10 °C in the full-temperature environment (−40~60 °C). The relationship between temperature and demodulation phase error is fitted by a third-order polynomial. The temperature is obtained by the temperature sensor and encapsulated in the ceramic packages of the MEMS gyroscope, and the in-run automatic compensation is realized based on the fitting curve. The temperature hysteresis effect on the zero-rate output (ZRO) of the gyroscope is eliminated after compensation. The bias instability (BI) of the three gyroscopes at room temperature (25 °C) is reduced by four to eight times to 0.1°/h, while that at full-temperature environment (−40~60 °C) is reduced by three to four times to 0.1°/h after in-run compensation.

Recycling flexible polyurethane foam (F-PUF) scraps is difficult due to the material’s high cross-linking structure. In this work, a wedge-block-reinforced extruder with a considerable enhanced shear extrusion and stretching area between the rotating screw and the stationary wedge blocks was utilized to recycle F-PUF scraps into powder containing surface-active hydroxyl groups. The powder was then utilized for the quantitative replacement of polyol in the foaming process. Characterizations showed that the continuous shear extrusion and stretching during the extrusion process reduced the volume mean diameter (VMD) of the F-PUF powder obtained by extruding it three times at room temperature to reach 54 μm. The -OH number (OHN) of the powder prepared by extruding it three times reached 19.51 mgKOH/g due to the mechanochemical effect of the powdering method. The F-PUF containing recycled powder used to quantitively replace 10 wt.% polyol was similar in microstructure and chemical structure to the original F-PUF, with a compression set of 2%, indentation load deflection of 21.3 lbf, resilience of 43.4%, air permeability of 815.7 L/m2·s, tensile strength of 73.0 Kpa, and tear strength of 2.3 N/cm, indicating that the recycling method has potential for industrial applications.

Low-temperature mechanical chemical devulcanization is a process that can produce reclaimed rubber with exceptional mechanical properties. However, the inadequacy and low efficiency of the devulcanization have significantly restricted its application. To address the issues, alcoholic amines, including hydroxyethyl ethylenediamine (AEEA), ethanolamine (ETA), and diethanol amine (DEA), are utilized as devulcanizing agents to promote the devulcanization process. Careful characterizations are conducted to reveal the devulcanizing mechanism and to depict the performances of reclaimed rubbers. Results show that the amine groups in the devulcanizing agents can react with sulfur after the crosslink bonds are broken by mechanical shear force, thus blocking the activity of sulfur and introducing hydroxyl groups into the rubber chains. The incorporation of alcoholic amines can enhance the devulcanizing degree and devulcanizing efficiency, reduce the Mooney viscosity, and improve the mechanical and anti-aging performance. When using DEA as the devulcanizing agent, the sol content of reclaimed rubber increases from 13.1% to 22.4%, the devulcanization ratio increases from 82.1% to 89.0%, the Mooney viscosity decreases from 135.5 to 83.6, the tensile strength improves from 14.7 MPa to 16.3 MPa, the retention rate of tensile strength raises from 55.2% to 82.6% after aging for 72 h, while the devulcanization time is shortened from 21 min to 9.5 min, compared with that without using alcoholic amines. Therefore, alcoholic amines exhibit remarkable advantages in the devulcanization of waste rubber, thus indicating a promising direction for the advancement of research in the area of waste rubber reclamation.

The development of artificial intelligence technology provides a new model for substation inspection in the power industry, and effective defect diagnosis can avoid the impact of substation equipment defects on the power grid and improve the reliability and stability of power grid operation. Aiming to combat the problem of poor recognition of small targets due to large differences in equipment morphology in complex substation scenarios, a visual fault detection algorithm of substation equipment based on improved YOLOv5 is proposed. Firstly, a deformable convolution module is introduced into the backbone network to achieve adaptive learning of scale and receptive field size. Secondly, in the neck of the network, a simple and effective BiFPN structure is used instead of PANet. The multi-level feature combination of the network is adjusted by a floating adaptive weighted fusion strategy. Lastly, an additional small object detection layer is added to detect shallower feature maps. Experimental results demonstrate that the improved algorithm effectively enhances the performance of power equipment and defect recognition. The overall recall rate has increased by 7.7%, precision rate has increased by nearly 6.3%, and mAP@0.5 has improved by 4.6%. The improved model exhibits superior performance.

Abstract Background The H9N2 subtype of avian influenza virus (AIV) has become the most widespread subtype of AIV among birds in Asia, which threatens the poultry industry and human health. Therefore, it is important to establish methods for the rapid diagnosis and continuous surveillance of H9N2 subtype AIV. Methods In this study, an antigen-capture enzyme-linked immunosorbent assay (AC-ELISA) and a colloidal gold immunochromatographic test (ICT) strip using monoclonal antibodies (MAbs) 3G4 and 2G7 were established to detect H9N2 subtype AIV. Results The AC-ELISA method and ICT strip can detect H9N2 subtype AIV quickly, and do not cross-react with other subtype AIVs or other viruses. The detection limit of AC-ELISA was a hemagglutinin (HA) titer of 4 for H9N2 subtype AIV per 100 μl sample, and the limit of detection of the HA protein of AIV H9N2 was 31.5 ng/ml. The ICT strip detection limit was an HA titer of 4 for H9N2 subtype AIV per 100 μl sample. Moreover, both detection methods exhibited good reproducibility and repeatability, with coefficients of variation

Objectives: The continuous evolution of highly pathogenic H5N6 avian influenza viruses (AIVs) causes outbreaks in wildfowl and poultry, and occasional human infections. The aim of this study was to better understand the genetic relationships between these H5N6 AIVs from eastern China and other AIVs. Methods: In 2016, 1623 cloacal swabs were sampled from poultry in 18 LPMs in eastern China, and subsequently characterized systematically using gene sequencing, phylogenetic studies, and antigenic analysis. In addition, their pathogenicity in mammals was studied in BALB/c mice, which were inoculated with viruses, with survival rate and body weight recorded daily for 14 days. Results: In total, 56 H5N6 AIVs were isolated in eastern China and five representative isolates were selected for further study. In our study, the H5N6 AIVs clustered into clade 2.3.4.4, Group C, and their six internal segments were derived from H6N6 and H9N2 viruses, or both, suggesting extensive reassortant among H5N6 AIVs with other subtypes. These H5N6 viruses could replicate in the lungs without prior adaptation, and exhibited slight-to-moderate virulence in mice. Conclusions: The continuous circulation of these novel H5N6 viruses suggests the importance of persistent surveillance of H5N6 AIVs in poultry.

In the present scenario of development in technology, the applications of stretchable conductive elastomers in modern electronic equipments have aroused great interest. Non-covalent bonding modification of carbon nanotubes (CNTs) using dopamine has improved the dispersion of CNT@PDA and interfacial interaction with the rubber matrix. The SiO2@Ag core-shell particles were prepared by coated with silver nanoparticles (AgNPs) on the surface of SiO2 using dopamine oxidation self-polymerization and electroless plating process. ESBR composites were prepared by latex co-coagulation method, where CNT@PDA and SiO2@Ag were used to develop an 1D-3D synergistic conductive network in ESBR composites. One-dimensional (1D) CNT@PDA were incorporated in three-dimensional (3D) spherical SiO2@Ag core-shell particles, which effectively prevented the agglomeration of SiO2@Ag and CNT@PDA. Again, 1D CNT@PDA could also be used as bridges to interact with 3D SiO2@Ag to develop the charge transfer more effectively in ESBR composites. The optimum electrical conductivity of the ESBR/CNT@PDA/SiO2@Ag composites was 0.2 S/cm, which was found to be higher than that of single filler. Moreover, the high electrical conductivity can be controlled at low tensile strain. The mechanical property of ESBR/CNT@PDA/SiO2@Ag composite was also improved by 105.4% as compared by ESBR/CNTs. This work provides a new idea for the fabrication of stretchable conductive elastomer composites with high performance.

Abstract Background In 2020, a new coronavirus, SARS-CoV-2, quickly spread worldwide within a few months. Although coronaviruses typically infect the upper or lower respiratory tract, the virus RNA can be detected in plasma. The risk of transmitting coronavirus via transfusion of blood products remains. As more asymptomatic infections are identified in COVID-19 cases, blood safety has become particularly important. Methylene blue (MB) photochemical technology has been proven to inactivate lipid-enveloped viruses with high efficiency and safety. The present study aimed to investigate the SARS-CoV-2 inactivation effects of MB in plasma. Methods The SARS-CoV-2 virus strain was isolated from Zhejiang University. The live virus was harvested from cultured VERO-E6 cells, and mixed with MB in plasma. The MB final concentrations were 0, 1, 2, and 4 μM. The “BX-1 AIDS treatment instrument” was used at room temperature, the illumination adjusted to 55,000 ± 0.5 million Lux, and the plasma was irradiated for 0, 2, 5, 10, 20, and 40 mins using light at a single wavelength of 630 nm. Virus load changes were measured using quantitative reverse transcription- PCR. Results BX-1 could effectively eliminate SARS-CoV-2 within 2 mins in plasma, and the virus titer declined to 4.5 log10 TCID50 (median tissue culture infectious dose)/mL. Conclusion BX-1 is based on MB photochemical technology, which was designed to inactivate HIV-1 virus in plasma. It was proven to be safe and reliable in clinical trials of HIV treatment. In this study, we showed that BX-1 could also be applied to inactivate SARS-CoV-2. During the current outbreak, this technique it has great potential for ensuring the safety of blood transfusions, for plasma transfusion therapy in recovering patients, and for preparing inactivated vaccines.

Abstract Background Highly pathogenic influenza A (H5N8) viruses have caused several worldwide outbreaks in birds and are of potential risk to humans. Thus, a specific, rapid and sensitive method for detection is urgently needed. Methods In the present study, TaqMan minor groove binder probes and multiplex real-time RT-PCR primers were designed to target the H5 hemagglutinin and N8 neuraminidase genes. A total of 38 strains of avian influenza viruses and other viruses were selected to test the performance of the assay. Results The results showed that only H5 and N8 avian influenza viruses yielded a positive signal, while all other subtypes avian influenza viruses and other viruses were negative. High specificity, repeatability, and sensitivity were achieved, with a detection limit of 10 copies per reaction. Conclusions The developed assay could be a powerful tool for rapid detection of H5N8 influenza viruses in the future.

ABSTRACTThe mutations in the SARS-CoV-2 virus genome during COVID-19 dissemination are unclear. In 788 COVID-19 patients from Zhejiang province, we observed decreased rate of severe/critical cases compared with patients in Wuhan. For mechanisms exploration, we isolated one strain of SARS-CoV-2 (ZJ01) from a mild COVID-19 patient. Thirty-five specific gene mutations were identified. Phylogenetic and relative synonymous codon usage analysis suggested that ZJ01 may be a potential evolutionary branch of SARS-CoV-2. We classified 54 global virus strains based on the base (C or T) at positions 8824 and 28247 while ZJ01 has T at both sites. The prediction of the Furin cleavage site (FCS) and sequence alignment indicated that the FCS may be an important site of coronavirus evolution. ZJ01 mutations identified near the FCS (F1-2) caused changes in the structure and electrostatic distribution of the S surface protein, further affecting the binding capacity of Furin. Single-cell sequencing and ACE2-Furin co-expression results confirmed that the Furin expression was especially higher in glands, liver, kidneys, and colon. The evolutionary pattern of SARS-CoV-2 towards FCS formation may result in its clinical symptom becoming closer to HKU-1 and OC43 caused mild flu-like symptoms, further showing its potential in differentiating into mild COVID-19 subtypes.

ABSTRACTThe H7N9 viruses have been circulating for six years. The insertion of a polybasic cleavage site in the haemagglutinin (HA) protein of H7N9 has resulted in the emergence of a highly pathogenic (HP) avian influenza virus. Currently, there are limited studies on neutralizing monoclonal antibodies(mAbs) against HP H7N9 AIVs. In this study, mice were immunized with inactivated H7N9 vaccine of A/ZJU01/PR8/2013 to produce murine mAbs. Finally, two murine mAbs against the HA of low pathogenic (LP) virus were produced and characterized. Characterization included determining mAbs binding breadth and affinity, in vitro neutralization capacity, and potential in vivo protection. Two of these mAbs, 1H10 and 2D1, have been identified to have therapeutic and prophylactic efficacy against the HP strain in mouse passive transfer-viral challenge experiments. The mAb 1H10 was most efficacious, even if the treatment-time was as late as 72 h post-infection, or the therapeutic dose was as low as 1 mg/kg; and it was confirmed to have haemagglutination inhibition and neutralizing activity on both LP-and HP-H7N9 strains. Further study indicated that the protection provided by 2D1 was mediated by antibody-dependent cellular cytotoxicity. The mAbs described here provide promising results and merit further development into potential antiviral therapeutics for H7N9 infection.

Carbon nanotube (CNT), as reinforcing agents in natural rubber (NR), has gained a large amount of consideration due to their excellent properties. Uniform dispersion of CNT is the key to obtaining high-performance NR nanocomposites. In this contribution, a novel ultrasonic grinding dispersion method of CNT with waterjet-produced rubber powder (WPRP) as a carrier is proposed. Microscopic morphologies show that a Xanthium-like structure with WPRP as the core and CNTs as the spikes is formed, which significantly improves the dispersion of CNT in the NR matrix and simultaneously strengthens the bonding of the WPRP and NR matrix. With the increase in the WPRP loading, the Payne effect of CNT/WPRP/NR composites decreases, indicating the effectiveness of the dispersion method. The vulcanization MH and ML value and crosslinking density increase with the increase in the WPRP loading, whereas the scorch time and cure time exhibit a decreasing trend when the WPRP loading is less than 15 phr. It is found that the CNT/WPRP/NR composites filled with 5 phr WPRP have a 4% increase in 300% modulus, a 3% increase in tensile strength, while a 5% decrease in Akron abrasion loss, compared to CNT/NR composites.

In the context of protecting the ecological environment and carbon neutrality, high-value recycling of flexible polyurethane foam (F-PUF) scraps, generated in the production process, is of great significance to save petroleum raw materials and reduce energy consumption. In the present study, F-PUF scraps were ground into powder by strong shear regrinding using two-roll mill and then reused as a partial replacement of polyol for re-foaming. A series of characterizations were employed to investigate the effect of milling cycles, roller temperatures, and content of the powder on the properties of the powder and F-PUF containing powder. It was revealed that the mechanochemical effect induced breaking of the cross-linking structure and increased activity of the powder. The volume mean diameter (VMD) of powder prepared with 7 milling cycles, at room temperature, is about 97.73 μm. The microstructure and density of the F-PUF containing powder prepared in the above-mentioned manner to replace up to 15 wt.% polyol, is similar to the original F-PUF, with resilience 49.08% and compression set 7.8%, which indicates that the recycling method will play an important role in industrial applications.

There is a worldwide pandemic of Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection; yet our understanding remains limited on the characteristic of antibodies, especially for dynamic long-term tracking. Sequential serum samples were collected up to 416 days post onset of symptoms (POS) from 102 patients who were hospitalized with coronavirus disease 2019 (COVID-19). Immunoglobulin (Ig)G, IgM, and IgA levels targeting SARS-CoV-2 spike 1 receptor-binding domain (S1-RBD), spike 2 extracellular domain (S2-ECD), and nucleocapsid protein (N) were quantified as well as neutralizing activity. We were pleasantly surprised to find that the antibody remained detective and effective for more than a year POS. We also found the varied reactions of different antibodies as time passed: N-IgA rose most rapidly in the early stage of infection, while S2-IgG was present at a high level in the long time of observation. This study described the long traceable antibody response of the COVID-19 and offered hints about targets to screen for postinfectious immunity and for vaccination development of SARS-CoV-2.

Abstract Background The H6N1 subtype of avian influenza viruses (AIVs) can infect people with an influenza-like illness; the H6N1 viruses possess the ability for zoonotic transmission from avians into mammals, and possibly pose a threat to human health. Methods In 2017, live poultry markets (LPMs) in Zhejiang Province were surveyed for AIVs. To better understand the genetic relationships between these strains from Eastern China and other AIVs, all gene segments of these strains were sequenced and compared with sequences available in GenBank. In this study, we analyzed the receptor-binding specificity, antigenic characteristics, and pathogenicity of these two H6N1 viruses. Results In 2017, two H6N1 AIVs were isolated from chickens during surveillance for AIVs in LPMs in Eastern China. Phylogenetic analysis showed that these strains shared genetic characteristics from H6, H10, H1, and H4 AIVs found in ducks and wild birds in East Asia. These AIV strains were able to replicate in mice without prior adaptation. Conclusions In this study, we report the discovery of new strains of H6N1 viruses from chickens with novel gene reassortments. Our results suggest that these chickens play an important role generating novel reassortments in AIVs, and emphasize the need for continued surveillance of AIV strains circulating in poultry.

Delay-division-multiplexing (DDM) involves the use of signal preprocessing for the detection of data via sub-Nyquist analog-to-digital sampling, based on preallocated relative sampling delays among optical network users (ONUs) in an orthogonal frequency-division multiplexing (OFDM) passive optical network (PON). If a DDM-PON consists of M virtual groups, the sampling rate at the receivers is only 1/M of the Nyquist rate, but the maximum capacity of each ONU is fixed at 1/M of the total capacity. In this study, we developed a novel DDM scheme that uses hybrid sub-Nyquist sampling rates to accommodate heterogeneous services of different capacities in an OFDM-PON. To equalize the transmission performances using hybrid sub-Nyquist sampling rates, the modification of preprocessing was proposed, and its necessity was demonstrated. Without loss of generality, we experimentally demonstrated a 25-Gbps DDM-OFDM-PON using hybrid sampling at 1/2, 1/8, and 1/32 (or 1/8, 1/16, and 1/32) of the Nyquist rate. Compared to a DDM-PON with a fixed subNyquist rate, the received signals based on hybrid sub-Nyquist sampling rates show similar sensitivities. A loss budget of 26 dB was experimentally achieved using all sub-Nyquist sampling rates after employing the modified preprocessing.

Common swelling agents used in the mechano-chemical rubber devulcanization process usually require high temperatures to achieve satisfactory swelling effects, which results in severe production of pollutants and reduces the selectivity of bond scissions. This work presents an environmentally friendly swelling agent, terpinene, which can swell the rubber crosslink structures at low temperatures. Both a rubber swelling experiment and a rubber reclaiming experiment with a mechano-chemical devulcanization method are conducted to explore the swelling effects of terpinene. After soaking in terpinene at 60 °C for 90 min, the length elongation of the rubber sample reaches 1.55, which is much higher than that in naphthenic oil and is comparable to that in toluene. When adding 3 phr of terpinene for every 100 phr of waste rubber during the reclaiming process, the bond scissions exhibit high selectivity. After revulcanization, the reclaimed rubbers have a tensile strength of 17 MPa and a breaking elongation of 400%. Consequently, the application of terpinene as the swelling agent in the LTMD method can greatly improve the properties of reclaimed rubbers, thereby enhancing the dual value for the economy and environment.

Disc gyroscope manufactured through microelectromechanical systems (MEMS) fabrication processes becomes one of the most critical solutions for achieving high performance. Some reported novel disc constructions acquire good performance in bias instability, scale factor nonlinearity, etc. However, antivibration characteristics are also important for the devices, especially in engineering applications. For multi-ring structures with central anchors, the out-of-plane motions are in the first few modes, easily excited within the vibration environment. The paper presents a multi-ring gyro with good dynamic characteristics, operating at the first resonant mode. The design helps obtain better static performance and antivibration characteristics with anchor points outside of the multi-ring resonator. According to harmonic experiments, the nearest interference mode is located at 30,311 Hz, whose frequency difference is 72.8% far away from working modes. The structures were fabricated with silicon on insulator (SOI) processes and wafer-level vacuum packaging, where the asymmetry is 780 ppm as the frequency splits. The gyro also obtains a high Q-factor. The measured value at 0.15 Pa was 162 k, which makes the structure have sizeable mechanical sensitivity and low noise.

H5N6 avian influenza viruses (AIVs) can cause severe pneumonia and death in humans. However, the molecular determinants of H5N6 influenza virus mammalian adaption are still unclear. Three amino acid substitutions (HA A150V, PA A343T, PB2 E627K) are observed in H5N6 virus A/duck/Zhejiang/6D2/2013 (6D2) in lung-to-lung passage in mice. These substitutions are crucial to the pathogenicity of mouse-adapted virus. In this study, we investigated the contribution of each amino acid substitution in the virus by reverse genetics. The results demonstrate that HA A150V greatly altered the receptor binding preference of 6D2. Virus bearing this substitution acquired increased mortality than mice infected with wild-type 6D2. The PA A343T substitution mildly enhanced viral polymerase activity but the reduced survival rate in mice indicates this substitution may change the immunoreaction of the host. The well-known PB2 E627K substitution increased eight folds the relative polymerase activity compared to PA A343T and resulted in 100% death rate in mice. In addition, we show that PA A343T dramatically exacerbates the effect of PB2 E627K on viral polymerase activity; when combined, these two substitutions work synergistically. However, HA A150V and PA A343T seemed to attenuate PB2 E627K in vivo, which implies the difference between mixed viral populations under natural condition and single population under experiment, specialization and cooperation in quasispecies is important in the process of adaption. This study suggests that HA A150V, PA A343T, and PB2 E627K are crucial in the adaption and increased pathogenicity of H5N6 in mammalian hosts.

Currently, there are three algorithms for screening of syphilis: traditional algorithm, reverse algorithm and European Centre for Disease Prevention and Control (ECDC) algorithm. To date, there is not a generally recognized diagnostic algorithm. When syphilis meets HIV, the situation is even more complex. To evaluate their screening performance and impact on the seroprevalence of syphilis in HIV-infected individuals, we conducted a cross-sectional study included 865 serum samples from HIV-infected patients in a tertiary hospital. Every sample (one per patient) was tested with toluidine red unheated serum test (TRUST), T. pallidum particle agglutination assay (TPPA), and Treponema pallidum enzyme immunoassay (TP-EIA) according to the manufacturer's instructions. The results of syphilis serological testing were interpreted following different algorithms respectively. We directly compared the traditional syphilis screening algorithm with the reverse syphilis screening algorithm in this unique population. The reverse algorithm achieved remarkable higher seroprevalence of syphilis than the traditional algorithm (24.9% vs. 14.2%, p < 0.0001). Compared to the reverse algorithm, the traditional algorithm also had a missed serodiagnosis rate of 42.8%. The total percentages of agreement and corresponding kappa values of tradition and ECDC algorithm compared with those of reverse algorithm were as follows: 89.4%,0.668; 99.8%, 0.994. There was a very good strength of agreement between the reverse and the ECDC algorithm. Our results supported the reverse (or ECDC) algorithm in screening of syphilis in HIV-infected populations. In addition, our study demonstrated that screening of HIV-populations using different algorithms may result in a statistically different seroprevalence of syphilis.

Trisomy 13 (Patau syndrome) is the third most common autosomal trisomy with a prevalence between 1 in 10,000 - 20,000 live births. Robertsonian translocations represent the largest number of chromosomal aberrations in human population with an incidence of 1.23 in 1000 live birth and translocation 13;14 is one of the most frequent Robertsonian translocations (approximately 75%). We sampled umbilical vein blood from a 27-yr-old woman whose ultrasonography findings revealed congenital heart defects, single ventricle, polycystic kidney, median cleft lip and palate and holoprosencephaly at gestational age of 23+6 weeks for karyotype and sequencing during intra-amniotic cavity injection of acrinol for labor induction. Next-generation sequencing indicated 47,XN,+13 and karyotype was identified as 46,XN,+13,rob (13;14). An unexpected problem becomes more and more obvious in human cytogenetics – it seems to become difficult to decide how and when to use the “molecular cytogenetics” or “traditional karyotype analysis”. Molecular cytogenetics, such as next-generation sequencing and array-based comparative genomic hybridization (array-CGH), can detect microdeletions and micro-duplications, but it cannot detect balanced translocations. For this case, we cannot find balanced translocations by Molecular cytogenetics. The purpose of this case is that molecular cytogenetics cannot replace the traditional karyotype analysis, but can serve as a useful complement for G-banding to be used in the clinical cytogenetic diagnosis.

Recently, novel variants of H5 highly pathogenic avian influenza viruses (AIVs) have been frequently isolated from poultry and wild birds in Asia, Europe and North America. Live poultry markets (LPMs) play an important role in the dissemination of influenza viruses. Four H5N2 AIVs were isolated from poultry during surveillance of AIVs in LPMs in Eastern China, in 2015. Whole-genome sequencing, combined with phylogenetic and antigenic analyses were performed to characterize these viruses. These H5N2 viruses had undergone extensive reassortment resulting in two genetic groups of viruses in poultry. These viruses exhibited slightly pathogenicity in mice, and replicated without prior adaptation. The continued circulation of these novel H5N2 viruses may represent a threat to human health.