Search

Background: Hepatic impairment can impact apixaban pharmacokinetics and pharmacodynamics by decreasing cytochrome P450-mediated metabolism and factor X production., Objective: This study evaluated the effect of mild or moderate (Child-Pugh A and B) hepatic impairment on apixaban pharmacokinetics, pharmacodynamics, and safety., Methods: This open-label, parallel-group, single-dose study included eight mildly and eight moderately hepatically impaired subjects, and 16 healthy subjects. Subjects received a single oral apixaban 5-mg dose (day 1). Pharmacokinetic, pharmacodynamic, and safety assessments were completed at prespecified time points. Apixaban maximum plasma concentration and area under the concentration-time curve to infinity were compared between subjects with hepatic impairment and healthy subjects., Results: Apixaban area under the concentration-time curve to infinity point estimates and 90% confidence intervals were 1.03 (0.80-1.32) and 1.09 (0.85-1.41) for subjects with mild and moderate hepatic impairment vs healthy subjects. Maximum plasma concentration results were similar. Mean (standard deviation) apixaban unbound fraction was 6.8% (1.4), 7.9% (1.8), and 7.1% (1.3) in subjects with mild or moderate hepatic impairment and in healthy subjects. Mean change from baseline in international normalized ratio (3 h post-dose) was 14.7%, 12.7%, and 10.7% for subjects with mild or moderate hepatic impairment and healthy subjects, respectively. A direct relationship was observed between apixaban anti-factor Xa activity and plasma concentration across groups. No serious adverse events or discontinuations due to adverse events occurred., Conclusions: Mild or moderate hepatic impairment had no clinically relevant impact on apixaban pharmacokinetic or pharmacodynamic measures, suggesting that dose adjustment may not be required., (© 2021. The Author(s).)

Objective: PAR (protease-activated receptor)-4 antagonism has antiplatelet effects under conditions of high shear stress. We aimed to establish whether PAR4 antagonism had additive antithrombotic activity in the presence of factor Xa inhibition in an ex vivo model of acute arterial injury. Approach and Results: Fifteen healthy volunteers (29±6 years, 7 women) completed a phase zero double-blind randomized controlled crossover trial. Ex vivo platelet activation, platelet aggregation, and thrombus formation were measured following blood perfusion of low shear and high shear stress chambers. Upstream of the chambers, extracorporeal blood was admixed with (1) vehicle, (2) low-dose apixaban (20 ng/mL), (3) high-dose apixaban (80 ng/mL), (4) BMS-986141 (400 ng/mL), (5) BMS-968141 and low-dose apixaban, or (6) BMS-968141 and high-dose apixaban in 6 sequential studies performed in random order. Compared with vehicle, BMS-986141 demonstrated selective inhibition of PAR4-AP (agonist peptide)-stimulated platelet aggregation, platelet-monocyte aggregates, and P-selectin expression ( P ≤0.01 for all). Total thrombus area was reduced under both low shear and high shear stress conditions for all drug infusions ( P <0.0001 for all versus vehicle). BMS-968141 reduced total (≤44.4%) and platelet-rich (≤39.3%) thrombus area, whereas apixaban reduced total (≤42.9%) and fibrin-rich (≤31.6%) thrombus area. Combination of BMS-986141 with apixaban caused a further modest reduction in total thrombus area (9.6%-12.4%), especially under conditions of high shear stress ( P ≤0.027)., Conclusions: In the presence of factor Xa inhibition, PAR4 antagonism with BMS-986141 further reduces thrombus formation, especially under conditions of high shear stress. This suggests the potential for additive efficacy of combination PAR4 antagonism and factor Xa inhibition in the prevention of atherothrombotic events.

Background: The increasing global prevalence of multidrug-resistant bacteria is forcing clinicians to prescribe combination antibiotic regimens to treat serious infections. Currently, the joint activity of a combination is quantified by comparing the observed and expected effects using a reference model. These reference models make different assumptions and interpretations of synergy. They fail to: (i) account for multiple bacterial subpopulations with differing susceptibilities; (ii) quantify or interpret the explicit interaction (synergy/antagonism) mechanisms; and (iii) accommodate spontaneous mutations., Aims: To develop better study designs, mathematical models, metrics and pharmacodynamic analyses to assist with the identification of highly active combinations that are translatable to the clinical context to address the mounting antibiotic resistance threat., Sources: PubMed, references of identified studies and reviews, and personal experience when evidence was lacking., Content: We reviewed metrics and approaches for quantifying the joint activity of the combination. The first example is using experimental data from an in vitro checkerboard synergy panel to develop and illustrate a less model-dependent method for assessing combination regimens. In the second example a pharmacokinetic/pharmacodynamic model was developed using mechanism-based mathematical modelling and monotherapy and combination therapy data obtained from an in vitro hollow fibre infection model evaluating linezolid and rifampin regimens against Mycobacterium tuberculosis., Implications: Mechanism-based mathematical approach provides an excellent platform for describing the time course of effect while taking into account the mechanisms of different antibiotics and differing pathogen susceptibilities. This approach allows for the future integration of 'omics' data describing host-pathogen interactions, that will provide a systems-level understanding of the underlying infectious process, and enable the design of effective combination therapies., (Copyright © 2017. Published by Elsevier Ltd.)

Acute kidney injury (AKI) occurs in a substantial proportion of critically ill patients receiving intravenous colistin. In the pharmacokinetic/toxicodynamic analysis reported here, the relationship of the occurrence of AKI to exposure to colistin and a number of potential patient factors was explored in 153 critically ill patients, none of whom were receiving renal replacement therapy. Tree-based modeling revealed that the rates of AKI were substantially higher when the average steady-state plasma colistin concentration was greater than ∼2 mg/liter., (Copyright © 2017 American Society for Microbiology.)

Objectives: The emergence of polymyxin resistance threatens to leave clinicians with few options for combatting drug-resistant Acinetobacter baumannii . The objectives of the current investigation were to define the in vitro emergence of polymyxin resistance and identify a combination regimen capable of eradicating A. baumannii with no apparent drug susceptibilities., Methods: Two clonally related, paired, A. baumannii isolates collected from a critically ill patient who developed colistin resistance while receiving colistin methanesulfonate in a clinical population pharmacokinetic study were evaluated: an A. baumannii isolate collected before (03-149.1, polymyxin-susceptible, MIC 0.5 mg/L) and an isolate collected after (03-149.2, polymyxin-resistant, MIC 32 mg/L, carbapenem-resistant, ampicillin/sulbactam-resistant). Using the patient's unique pharmacokinetics, the patient's actual regimen received in the clinic was recreated in a hollow-fibre infection model (HFIM) to track the emergence of polymyxin resistance against 03-149.1. A subsequent HFIM challenged the pan-resistant 03-149.2 isolate against polymyxin B, meropenem and ampicillin/sulbactam alone and in two-drug and three-drug combinations., Results: Despite achieving colistin steady-state targets of an AUC 0-24 >60 mg·h/L and C avg of >2.5 mg/L, colistin population analysis profiles confirmed the clinical development of polymyxin resistance. During the simulation of the patient's colistin regimen in the HFIM, no killing was achieved in the HFIM and amplification of polymyxin resistance was observed by 96 h. Against the polymyxin-resistant isolate, the triple combination of polymyxin B, meropenem and ampicillin/sulbactam eradicated the A. baumannii by 96 h in the HFIM, whereas monotherapies and double combinations resulted in regrowth., Conclusions: To combat polymyxin-resistant A. baumannii , the triple combination of polymyxin B, meropenem and ampicillin/sulbactam holds great promise., (© The Author 2017. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Background: Intravenous colistin is difficult to use because plasma concentrations for antibacterial effect overlap those causing nephrotoxicity, and there is large inter-patient variability in pharmacokinetics. The aim was to develop dosing algorithms for achievement of a clinically desirable average steady-state plasma colistin concentration (C ss,avg ) of 2mg/L., Methods: Plasma concentration-time data from 214 adult critically-ill patients (creatinine clearance 0-236mL/min; 29 receiving renal replacement therapy (RRT)) were subjected to population pharmacokinetic analysis. Development of an algorithm for patients not receiving RRT was based upon the relationship between the dose of colistimethate that would be needed to achieve a desired C ss,avg and creatinine clearance. The increase in colistin clearance when patients were on RRT was determined from the population analysis and guided the supplemental dosing needed. To balance potential antibacterial benefit against risk of nephrotoxicity the algorithms were designed to achieve target attainment rates of >80% for C ss,avg ≥2 and <30% for C ss,avg ≥4mg/L., Results: When algorithm doses were applied back to individual patients not on RRT (including patients prescribed intermittent dialysis on a non-dialysis day), >80% of patients with creatinine clearance <80mL/min achieved C ss,avg ≥2mg/L; but for patients with creatinine clearance ≥80mL/min target attainment was <40%, even with the maximum allowed daily dose of 360mg colistin base activity. For patients receiving RRT, target attainment rates were >80% with the proposed supplemental dosing. In all categories of patients, <30% of patients attained C ss,avg ≥4mg/L., Conclusions: The project has generated clinician-friendly dosing algorithms and pointed to circumstances where intravenous monotherapy may be inadequate., (© The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.)

Aim: A UHPLC-MS/MS assay was developed to quantify urinary dehydroepiandrosterone (DHEA), 7β-hydroxy-DHEA, cortisone and 6β-hydroxycortisone as potential biomarkers to predict CYP3A activity., Results: A sensitive assay at LLOQ of 0.500 ng/ml with good accuracy and precision was developed for the four analytes in human urine. This UHPLC-MS/MS assay was optimized by eliminating nonspecific loss of the analytes in urine, ensuring complete hydrolysis of the conjugates to unconjugated forms and use of the product ions of [M+H-H 2 O] + for multiple reaction monitoring detection of DHEA and 7β-hydroxy-DHEA., Conclusion: This assay was successfully applied to a pilot clinical study. It is also suitable for future drug-drug interaction studies to continue evaluating the potential of these steroids as biomarkers for CYP3A inhibition and induction.

Our objective was to study the pharmacodynamics of daptomycin in the presence of varying concentrations of human serum (HS) in vitro to quantify the fraction of daptomycin that is 'active'. Time kill experiments were performed with daptomycin (0 to 256 mg/L) against two MRSA strains at log-phase growth, in the presence of HS (0%, 10%, 30%, 50%, 70%) combined with Mueller-Hinton broth. Daptomycin ≥ 2 mg/L achieved 99.9% kill within 8 h at all HS concentrations; early killing activity was slightly attenuated at higher HS concentrations. After 1 h, bacterial reduction of USA300 upon exposure to daptomycin 4 mg/L ranged from -3.1 to -0.5 log10CFU/mL in the presence of 0% to 70% HS, respectively. Bactericidal activity was achieved against both strains at daptomycin ≥ 4 mg/L for all fractions of HS exposure. A mechanism-based mathematical model (MBM) was developed to estimate the active daptomycin fraction at each %HS, comprising 3 bacterial subpopulations differing in daptomycin susceptibility. Time-kill data were fit with this MBM with excellent precision (r2 >0.95). The active fraction of daptomycin was estimated to range from 34.6% to 25.2% at HS fractions of 10% to 70%, respectively. Despite the reported low unbound fraction of daptomycin, the impact of protein binding on the activity of daptomycin was modest. The active fraction approach can be utilized to design in vitro experiments and to optimize therapeutic regimens of daptomycin in humans.

Background: The US Food and Drug Administration (FDA) and European Medicines Agency (EMA) have approved updated dose recommendations for intravenous colistin in patients with various degrees of renal function. We assessed the recommendations in relation to their ability to achieve clinically relevant plasma colistin concentrations., Methods: Pharmacokinetic data from 162 adult critically ill patients (creatinine clearance range, 5.4-211 mL/min) were used to determine the average steady-state plasma colistin concentration (Css,avg) that would be achieved if each patient received the FDA or EMA dose. Target attainment rates for FDA- and EMA-approved daily doses to achieve colistin Css,avg of ≥0.5, ≥1, ≥2, and ≥4 mg/L were determined for each creatinine clearance category (≥80 mL/min, 50 to <80 mL/min, 30 to <50 mL/min, and <30 mL/min)., Results: For creatinine clearance <30 mL/min, 100% of patients receiving the EMA dose achieved a colistin Css,avg ≥1 mg/L, but the attainment rate was as low as 53.1% for patients receiving the FDA-approved dose. For colistin Css,avg ≥2 mg/L, the attainment rates were 87.5% with the EMA dose but only 6.3%-34.4% in patients receiving the FDA dose. Differences in attainment rates for a colistin Css,avg of ≥2 mg/L and ≥4 mg/L extended to patients with creatinine clearance 30 to <50 mL/min. For patients with creatinine clearance ≥80 mL/min, only approximately 65%-75% of patients achieved a colistin Css,avg of ≥1 mg/L with either set of recommendations., Conclusions: The study highlights important differences between the FDA- and EMA-approved dose recommendations and informs the setting of clinical breakpoints., Clinical Trials Registration: NCT00235690., (© The Author 2015. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.)

Background and Objectives: A previously published study of antiretroviral pharmacokinetics in the female genital tract of HIV-infected women demonstrated differing degrees of female genital tract penetration among antiretrovirals. These blood plasma (BP) and cervicovaginal fluid (CVF) data were co-modelled for four antiretrovirals with varying CVF exposures., Methods: Six paired BP and CVF samples were collected over 24 h, and antiretroviral concentrations determined using validated liquid chromatography (LC) with UV detection or LC-mass spectrometry analytical methods. For each antiretroviral, a BP model was fit using Bayesian estimation (ADAPT5), followed by addition of a CVF model. The final model was chosen based on graphical and statistical output, and then non-linear mixed-effects modelling using S-ADAPT was performed. Population mean parameters and their variability are reported. Model-predicated area under the concentration-time curve during the dosing interval (AUC(τ)) and exposure ratios of CVF AUC(τ):BP AUC(τ) were calculated for each drug., Results: The base model uses first-order absorption with a lag time, a two-compartment model, and a series of transit compartments that transfer the drug from BP to CVF. Protein-unbound drug transfers into CVF for efavirenz and atazanavir; total drug transfers for lamivudine and tenofovir. CVF follows a one-compartment model for efavirenz and atazanavir, and a two-compartment model for lamivudine and tenofovir. As expected, inter-individual variability was high. Model-predicted CVF AUC(τ):BP AUC(τ) ratios are consistent with published results., Conclusions: This is the first pharmacokinetic modelling of antiretroviral disposition in BP and CVF. These models will be further refined with tissue data, and used in clinical trials simulations to inform future studies of HIV pre-exposure prophylaxis in women.

With increasing clinical emergence of multidrug-resistant Gram-negative pathogens and the paucity of new agents to combat these infections, colistin (administered as its inactive prodrug colistin methanesulfonate [CMS]) has reemerged as a treatment option, especially for critically ill patients. There has been a dearth of pharmacokinetic (PK) data available to guide dosing in critically ill patients, including those on renal replacement therapy. In an ongoing study to develop a population PK model for CMS and colistin, 105 patients have been studied to date; these included 12 patients on hemodialysis and 4 on continuous renal replacement therapy. For patients not on renal replacement, there was a wide variance in creatinine clearance, ranging from 3 to 169 ml/min/1.73 m(2). Each patient was treated with a physician-selected CMS dosage regimen, and 8 blood samples for PK analysis were collected across a dosage interval on day 3 or 4 of therapy. A linear PK model with two compartments for CMS and one compartment for formed colistin best described the data. Covariates included creatinine clearance on the total clearance of CMS and colistin, as well as body weight on the central volume of CMS. Model-fitted parameter estimates were used to derive suggested loading and maintenance dosing regimens for various categories of patients, including those on hemodialysis and continuous renal replacement. Based on our current understanding of colistin PK and pharmacodynamic relationships, colistin may best be used as part of a highly active combination, especially for patients with moderate to good renal function and/or for organisms with MICs of ≥ 1.0 mg/liter.