Search

International audience; The synthesis of undecylenic acid partial esters can be performed at mild temperature with a classical esterification reaction catalyzed by dodecylbenzene sulfonic acid (DBSA). A semi‐empirical molecular modeling on the different reaction intermediates indicates that DBSA can strongly decrease their heats of formation through hydrogen bonding. Diester formation seems to be thermodynamically favored with a selectivity for alpha, alpha, or alpha, beta forms that depend on the geometry of the catalyst‐intermediate configuration. Triesters are not favored but a high selectivity for monoesters requires a kinetic control. Experimental approach, considering different DBSA concentrations and temperature partially confirms the theoretical predictions but surfactant properties of DBSA and monoesters may induce nonpredicted geometries. Global apparent activation energies are calculated, corresponding to the formation and hydrolysis of mono and diesters. If water trapping allows the decrease of hydrolysis reaction constants, the presence of water and subsequent phase separation may explain differences between theoretical and experimental results and could help increasing monoester selectivity.

We report herein the synthesis of two non-ionic amphiphiles with a cholesterol hydrophobic moiety that can be used as chemical additives for biochemical studies of membrane proteins. They were designed to show a high similarity with the planar steroid core of cholesterol and small-to-medium polar head groups attached at the C3 position of ring-A on the sterol skeleton. The two Chol-Tris and Chol-DG have a Tris-hydroxymethyl and a branched diglucose polar head group, respectively, which provide them sufficient water solubility when mixed with the "gold standard" detergent n-Dodecyl-β-D-Maltoside (DDM). The colloidal properties of these mixed micelles were investigated by means of surface tension (SFT) measurements and dynamic light scattering (DLS) experiments and showed the formation of globular micelles of about 8 nm in diameter with a critical micellar concentration of 0.20 mM for DDM:Chol-DG and 0.22 mM for DDM:Chol-Tris. We showed that mixed micelles do not alter the extraction potency of a G-protein coupled receptor (GPCR): the human adenosine A2A receptor (A

International audience; Fluorinated surfactants have scarcely been explored for the direct extraction of proteins from membranes because fluorination is believed to abrogate detergency. However, we have recently shown that a commercially available fluorinated surfactant readily solubilizes lipid membranes, thereby suggesting that fluorination per se does not interfere with detergent activity. In this work, we developed new fluorinated surfactants that exhibit detergency in terms of both lipid-vesicle solubilization and membrane-protein extraction. The compounds made and tested contain two glucose moieties as polar headgroup, a hydrogenated thioether linker, and a perfluorinated alkyl tail with either 4, 6, or 8 carbon atoms. The physicochemical properties of the micelles formed by the three fluorinated surfactants were evaluated by NMR spectroscopy, surface tensiometry, isothermal titration calorimetry, dynamic light scattering, small-angle X-ray scattering, and analytical ultracentrifugation. At 25 °C, micellization was mainly entropy-driven, and the CMC values were found to decrease with chain length of the fluorinated tail, whereas the aggregation number increased with chain length. Remarkably, all three surfactants were found to solubilize lipid vesicles and extract a broad range of proteins from Escherichia coli membranes. These findings demonstrate, for the first time, that nonionic fluorinated surfactants could be further exploited for the direct extraction and solubilization of membrane proteins.

International audience; We report herein the design and synthesis of a novel series of alkyl glycosides detergents consisting of a nonionic polar headgroup that comprises two glucose moieties in a branched arrangement (DG), onto which octane-, decane- and dodecanethiols were grafted leading to ODG, DDG, and DDDG detergents. Micellization in aqueous solution was studied by isothermal titration calorimetry (ITC), 1H NMR spectroscopy, and surface tensiometry (SFT). Critical micellar concentration values were found to decrease by a factor of ~10 for each pair of methylene groups added to the alkyl chain, ranging from ~0.05 mM to 9 mM for DDDG and ODG, respectively. Dynamic light scattering (DLS) and analytical ultracentrifugation sedimentation velocity (AUC-SV) experiments were used to investigate the size and the composition of the micellar aggregates, showing that the aggregation number significantly increased from ~40 for ODG to ~80 for DDDG. All new compounds were able to solubilize MPs from bacterial membranes, insect cells, as well as Madin Darby Canine Kidney (MDCK) cells. In particular, native human adenosine receptor (A2AR) and bacterial transporter BmrA were solubilized efficiently. A striking thermostability improvement of +13 and +9°C when ODG and DDG were respectively applied to wild type and full length A2AR. Taken together, this novel detergent series shows promising detergent potency for solubilization and stabilization of MPs and, thus, makes a valuable addition to the chemical toolbox available for extracting and handling these important but challenging membrane protein targets.

International audience; The objective of this study is to develop bio-sourced waste chemicals for use as asphalt release agents. Glycerol was extracted from bio-sourced waste and transformed by transesterification into the surfactants undecenoates of glycerol (MUG) and undecenoates of diglycerol (MUDG). They were composed of glycerol, monoglycerol, diglycerol, triglycerol, tetraglycerol and water. The formulations were mixed separately with water at quantities of 5-50%, along with acetone and commercial bio-sourced ARAs in order to observe the effects. The formulations were subjected to performance testing with the asphalt slide test, finding significant reduction in adhesion for a number of different formulations. The interaction of the formulations with bitumen was tested by the bitumen degradation test, which was combined with FTIR-ATR analysis, finding that the formulations do not dissolve the bitumen, but rather were adsorbed by the bitumen. The effects on asphalt mix of the best performing formulation, MUG at 20% in water, was tested by indirect tensile strength, determining that the formulation was acceptable for use in the field.

International audience; The self-assembling properties of glycerol esters in water are well known. Still, few data on glycerol monoesters of undecylenic acid are available. The aim of this study was to highlight the behavior of glycerol monoundecenoate (GM-C11:1) in different diluted and concentrated states. Its self-assembling properties in water and upon solid inorganic surfaces were investigated in the diluted state using surface tension experiments, atomic force microscopy, and cryogenic transmission electron microscopy studies. In the concentrated state, the gelling properties in the presence of water were investigated using polarized light microscopy, differential scanning calorimetry (DSC), and small-angle X-ray scattering (SAXS) experiments. GM-C11:1 at 100 mg/L self-assembles at the liquid/air interfaces as aggregates of approximately 20 nm in diameter, organized into concentric forms. These aggregates are spherical globules composed of several molecules of GM-C11:1. At higher concentrations (1000 and 104 mg/L), GM-C11:1 is able to uniformly coat liquid/air and liquid/solid interfaces. In bulk, GM-C11:1 forms spontaneously aggregates and vesicles. In a more concentrated state, GM-C11:1 assembles into lamellar Lβ and Lα forms in water. By cross-referencing SAXS and DSC findings, we were able to distinguish between interlamellar water molecules strongly bound to GM-C11:1 and other molecules remaining unbound and considered to be “mobile” water. The percentage of water strongly bound was proportional to the percentage of GM-C11:1 in the system. In this case, GM-C11:1 appears to be an effective molecule for surface treatments for which water retention is important.

International audience; Over the past decade, the hexaphyrin skeleton has emerged as a multifaceted frame exhibiting strong interplay between topology, aromaticity, and metal coordination, opening new research areas beyond porphyrins. However, molecular recognition with hexaphyrins has been underexplored, mainly because of the lack of general synthetic strategies leading to sophisticated molecular hosts. Here we have developed a straightforward approach for capping the heteroannulene frame with tripodal units (e.g., tris(2-aminoethyl)amine [tren]) through postsynthetic modification of a readily accessible meso-(2-aminophenyl) tris-substituted platform. The resulting tren-capped hexaphyrins, obtained in three steps from a 5-(aryl)dipyrromethane precursor, display remarkable features: (i) Considering the 28π-conjugated system, instantaneous and site-selective Zn(II) metalation at the level of a dipyrrin versus tren unit triggers a planar-to-singly twisted conformational change and hence a Hückel antiaromatic-to-Möbius aromatic transformation. In spite of the tripodal linkage, a smooth twist and efficient π overlap are preserved. (ii) Selective and cooperative binding of both an acetato ligand and an amino ligand to zinc occurs in distinct confined environments, reminiscent of substrate discrimination at the buried metal centers of metalloenzymes. The ligand binding pockets are allosterically tuned by monoprotonation of the tren unit. (iii) Substantial chiral induction of the molecular twist is achieved using chiral amino ligands (diastereomeric excess up to 77%, the highest reported to date for a Möbius compound), to which is associated a strong chiroptical signature in circular dichroism. These results provide unprecedented insights into molecular recognition with hexaphyrins, paving the way to innovative Möbius-type molecular hosts for sensing and catalysis.

International audience; The direct esterification reaction between glycerol and undecylenic acid or between diglycerol and undecylenic acid generates all the possible types of glycerol or diglycerol esters. Purification by silica gel chromatography resulted in the isolation of each of these types of ester in a pure form. The molecular structures of the compounds isolated were characterized and identified by mass spectrometry, 1H NMR, 13C NMR and DEPT‐135. We then studied the composition of esters of undecylenic acid formed with glycerol or diglycerol as a function of their reaction conditions, which constitute a highly complex system. We purified undecylenic acid esters from each polyol family to allow the structural identification of each ester of glycerol and each ester of diglycerol with undecylenic acid. We found that the polarity of these non‐ionic amphiphilic esters directly affected their affinity for organic and inorganic solvents and that these esters behaved very differently from anionic amphiphilic molecules, such as undecylenic acid.