Search

The VariCol and ModiCon processes are two variants of the simulated moving bed (SMB) process, characterized by the modulation of the length of zones of the chromatographic column train and the feed concentration. These features give more flexibility than the conventional operation, leading to essential improvements in the separation and purification of mixtures. The optimal performance comparison of these two variants, the hybrid formed by their combination, and the conventional SMB process are scarce in the literature. This comparison helps discover new characteristics of each single and combined operation mode and creates guidelines to select the appropriate operation mode for possible real applications. In this work, the performance comparison of the ModiCon, VariCol, ModiCon+VariCol, and SMB processes is carried out in terms of maximal throughput for specific product purity values. Particular emphasis is placed on both the ModiCon and the hybrid ModiCon+VariCol processes characteristics. A strategy for combining and optimizing the ModiCon and the VariCol processes was determined. As a case study, the enantioseparation of guaifenesin was considered. In the ModiCon process, more than two modulation subintervals did not improve the performance in the separation. The optimal pattern, based on two subintervals, has zero feed concentration in the first subinterval and the maximal concentration in the second one. The best result for the hybrid operation (ModiCon+VariCol) was reached when the feed port moves simultaneously as the SMB process switching period. The optimal throughput of the ModiCon and the ModiCon+VariCol processes was almost doubled than that of the SMB process. These performances were based on larger zones I and II and not in zones II and III as occur with the SMB and VariCol process. The throughput in the hybrid operation increases more significantly than the ModiCon process when 5 columns were considered instead of 6. The hybrid operation could be more attractive for a system with a few numbers of columns., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Objective: Compounded oral solutions for respiratory illnesses such as the common cold and cough are commonly prepared and dispensed by licensed pharmacists in the United States and Puerto Rico (PR). Standard protocols for their preparation and quality assessment and for patient counseling are available for most of the prescribed compounded solutions. However, in PR there is a common prescription approach colloquially referred to as "mezclitas": mixtures of antitussives, expectorants, decongestants, and other active ingredients available in commercial solutions for which there are no science-driven compounding guidelines for local pharmacists., Methods: This study evaluated the physicochemical stability of a commonly dispensed compounded preparation (containing guaifenesin, dextromethorphan, and dexamethasone) that is used for the treatment of respiratory illnesses in PR. The stability indicators tested included clarity, odor, pH, and viscosity. Changes in stability indicators were evaluated for different storage conditions (ambient temperature and refrigerated) over a period of 6 months., Results: The samples exhibited small changes in color, odor, and viscosity. Although the observed changes were small, they may be indicative of chemical and/or physical transformations that occurred over time. A survey of local pharmacists also evidenced the absence of standardized protocols for the preparation and dispensation of the mezclitas in PR., Conclusion: In spite of the absence of protocols for compounding oral solutions for respiratory illnesses, our study suggests that the stability of such solutions is not heavily compromised. However further chemical and physical testing is needed and the findings of such testing used to develop standardized protocols for the compounding of oral solutions for respiratory illnesses.

Keggin-type polyoxometalate derived ionic liquids (POM-ILs) have recently been presented as effective solvent systems for biomass delignification. To investigate the mechanism of lignin dissolution in POM-ILs, the system involving POM-IL ([C4C1Im] 3 [PW 12 O 40 ]) and guaiacyl glycerol-β-guaiacyl ether (GGE), which contains a β-O-4 bond (the most dominant bond moiety in lignin), was studied using quantum mechanical calculations and molecular dynamics simulations. These studies show that more stable POM-IL structures are formed when [C4C1Im] + is anchored in the connecting four terminal oxygen region of the [PW 12 O 40 ] 3- surface. The cations in POM-ILs appear to stabilize the geometry by offering strong and positively charged sites, and the POM anion is a good H-bond acceptor. Calculations of POM-IL interacting with GGE show the POM anion interacts strongly with GGE through many H-bonds and π-π interactions which are the main interactions between the POM-IL anion and GGE and are strong enough to force GGE into highly bent conformations. These simulations provide fundamental models of the dissolution mechanism of lignin by POM-IL, which is promoted by strong interactions of the POM-IL anion with lignin.

The magnetic composite hydrogel was fabricated by the graft copolymerization of itaconic acid (IA) onto starch and Alginic acid in the presence graphene sheets (Gr) and Fe 3 O 4 nanoparticles (Fe 3 O 4 @Gr-IA/St-Alg) for Guaifenesin (GFN) delivery and wound healing. The Fe 3 O 4 @Gr-IA/St-Alg biomaterial is a hydrogel network endowed the material with magnetic property. In addition, GFN not only achieved effectively bound to the magnetic hydrogel, but also released in a controlled manner. The using external magnetic field has significantly positive influence on the drug release rate. To close, these hydrogel drug carriers offer a favorable platform for magnetically targeted drug delivery as well as a dress for wound healing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Two sensitive chromatographic methods have been developed, and validated for chlorpheniramine maleate (CM), phenylephrine (PE) and guaifenesin (GF) determination in their mixture and in presence of GF related substance guaiacol (GL) and preservative namely; sodium benzoate (NaB). The first method was based on thin layer chromatographic separation (TLC) followed by densitometric determination of the separated spots. The separation was achieved using silica gel 60 F254 TLC plates and ethyl acetate: methanol: toluene: ammonia (7:1.5:1:0.5, by volume) as a developing system. Densitometric quantification of the three drugs was carried by the reflectance mode at 270 nm. The second method was based on the use of high-performance liquid chromatography with diode array detection, by which the proposed components were separated on a reversed phase C18 analytical column using phosphate buffer pH 2.9 (containing 0.1 g Heptane-1-sulphonic acid sodium salt) and acetonitrile (85:15, v/v) at 0.8 mL/min for 4 minutes then 1 mL/min till end of the run using flow rate online switching technique. Both methods were validated according to the ICH guidelines and successfully applied for the determination of CM, PE, and GF in pure powder and in combined cough syrup without interference from the excipients., (© The Author(s) 2019. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

A respected number of drugs suffer from bitter taste which results in patient incompliance. With the aim of solving the bitterness of guaifenesin, dimethyl maleate, maleate, glutarate, succinate, and dimethyl succinate prodrugs were designed and synthesized. Molecular orbital methods were utilized for the design of the ester prodrugs. The density functional theory (DFT) calculations revealed that the hydrolysis efficiency of the synthesized prodrugs is significantly sensitive to the pattern of substitution on C=C bond and distance between the nucleophile and the electrophile. The hydrolysis of the prodrugs was largely affected by the pH of the medium. The experimental t 1/2 for the hydrolysis of guaifenesin dimaleate ester prodrugs in 1N HCl was the least and for guaifenesin dimethyl succinate was the highest. Functional heterologous expression of TAS2R14, a broadly tuned bitter taste receptor responding to guaifenesin, and experiments using these prodrugs revealed that, while some of the prodrugs still activated the receptor similarly or even stronger than the parent substance, succinate derivatization resulted in the complete loss of receptor responses. The predicted binding modes of guaifenesin and its prodrugs to the TAS2R14 homology model suggest that the decreased activity of the succinate derivatives may be caused by a clash with Phe247., (© 2018 John Wiley & Sons A/S.)

Ascorbic acid (ASC), paracetamol (PAR) and guaifenesin (GUF) are co-formulated together as analgesic and expectorant effervescent powder. This work describes a selective stability indicating HPTLC-densitometric method which is the first developed stability indicating one for chromatographic separation of the three studied drugs in presence of paracetamol toxic impurity [4-aminophenol (4-AP)] and guaifenesin related substance [impurity, (guaiacol) (GUC)]. The chromatographic separation was carried out on HPTLC 60F254 plates using chloroform-acetone-trifluoroacetic acid (6.5:3.5:0.30, by volume) as a developing system with UV detection at 254 nm. Factors affecting chromatographic separation have been optimized and good separation was obtained between the studied components where (ASC Rf = 0.05, 4-AP Rf = 0.12, GUF Rf = 0.24, PAR Rf = 0.41 and GUC Rf = 0.56). Method validation has been performed according to ICH guidelines and linearity was achieved in the range of 0.4-2.4, 0.4-2.8 and 4-15 μg/band for ASC, PAR and GUF, respectively. In order to evaluate the developed method it was applied for determination of the cited drugs in G.C.Mol® effervescent powder and the obtained results were statistically compared with those obtained by applying the reported HPLC method using Student's t- and F-tests where no significant difference was observed. The developed method has the advantages over the reported HPLC one of being more sensitive and selective which permit its application in quality control analysis of the cited their in presence of drug impurities.

An electrode has been developed based on using a composite of hematoxylin/graphene/ZnO nanocomposite to modify a glassy carbon electrode (GCE). The electrode (HGGCE) was tested and found to be applicable for the voltammetric analysis of levodopa in the presence of vitamin B 6 , theophylline and guaifenesin using a 0.1 M phosphate buffer solution (PBS) pH 7 as the solvent. The HGGCE was used as the working electrode in cyclic voltammetry (CV) and square wave voltammetry (SWV) studies on the electrochemical behavior of levodopa at its surface. The results showed a dramatic enhancement in the oxidation current of levodopa and a shift in its oxidation potential towards more negative potentials as opposed to identical tests using bare GCE as the working electrode. The studies showed that the increase in the oxidation current has two linear profiles in two concentration ranges of 0.05 - 90.0 and 90.0 - 1000.0 μM. The detection limit of SWV analysis using the modified electrode was determined to be 0.03 μM (S/N = 3). Further advantages of the methods based on HGGCE include the simple modification procedure of the electrode, as well as its excellent sensitivity and reproducibility. The modified electrode was eventually found to be applicable to the determination of mixtures of levodopa, vitamin B 6 , theophylline and guaifenesin in real samples.

The separation of aminoglutethimide enantiomers by the continuous multicolumn chromatographic processes were investigated experimentally and theoretically, where the columns were packed with cellulose tris 3,5-dimethylphenyl-carbamate stationary phase (brand name Chiralcel OD) and mobile phase was a mixture of n-hexane and ethanol with monoethanolamine additive. The continuous enantioseparation processes included a synchronous shifting process (SMB) and an asynchronous shifting process (VARICOL), which allowed reducing the column number (here from six-column SMB to five-column VARICOL process). Transport-dispersive model with the consideration of both intraparticle mass transfer resistance and axial dispersion was adopted to design and optimize the operation conditions for the separation of aminoglutethimide enantiomers by SMB process and VARICOL process. According to the optimized operation conditions, experiments were carried out on VARICOL-Micro unit using five-column VARICOL process with 1/1.5/1.5/1 configuration and six-column SMB process with 1/2/2/1 configuration. Products of R-aminoglutethimide (R-AG) enantiomer and S-aminoglutethimide (S-AG) enantiomer with more than 99.0% purity were obtained continuously from extract stream and raffinate stream, respectively. Furthermore, the experiemntal data obtained from five-column VARICOL process were compared with that from six-column SMB process, the feasibility and efficiency for the separation of guaifenesin enantiomers by VARICOL processes were evaluated., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Rationale: A current challenge for analytical chemists is the development of the measurement systems and approaches required to understand dynamic processes such as tablet dissolution. The design and development of oral tablets could be improved by the availability of detailed information about the rates of release of the individual tablet components. Small footprint mass spectrometry (MS) systems are gaining use for on-line reaction monitoring because of their ability to rapidly determine multiple reactant, intermediate, and product species. We have therefore assessed the utility of such MS systems to the study of dissolution processes., Methods: Aqueous dissolution media containing phosphate and other non-volatile buffer salts were pumped from a standard USPII dissolution vessel through an active splitter and back. The splitter sampled the dissolution stream and diluted it into a make-up flow which was pumped to a small single quadrupole mass spectrometer. Single ion monitoring was used to quantify the ions of interest. Three different bio-relevant dissolution media were studied to gauge the effect of the sample matrix., Results: Individual dissolution profiles were obtained from a tablet containing three drugs, and lactose as the soluble filler. This was successfully demonstrated with three different bio-relevant media designed to reflect the pH of the different sections of the human gastro-intestinal tract. Component concentrations as low as 0.06 µg/mL (representing 1% dissolution) were detected. The MS dissolution profiles correlated with the visual observation of tablet dissolution. MS gave linear responses with concentration for the individual components, although analysis of the tablet solution indicated that ion suppression is an area for further investigation., Conclusions: An on-line MS system was used to determine the individual dissolution profiles of three drugs and lactose as they were released from the same tablet. The level of each of these components in solution was determined every 10 seconds, and each had a similar release profile. The dissolution profiles were determined using inorganic buffer solutions at three different bio-relevant pHs., (Copyright © 2015 John Wiley & Sons, Ltd.)

As an important inter-unit of lignin, guaiacylglycerol-β-guaiacyl (GG) ether has been synthesized, and characterized using terahertz time-domain spectroscopy in the frequency range of 5-85 cm(-1). Seven absorption peaks have been observed. Among these peaks, the 49.8 cm(-1) and 57.6 cm(-1) vibrations are propose to be characteristic absorption peaks of GG ether. Raman spectra were also measured in the range of 50-3500 cm(-1). The vibrations of the two lowest energy forms, i.e., erythro 1r4s and threo 1s4s, were calculated using density functional theory at the B3LYP/6-311G∗∗ level and assigned according to potential energy distribution. In addition, the contents of erythro and threo forms in GG sample could be estimated by comparing the waveform similarities between theoretical and observed curves in the 33.0-80.0 cm(-1) range. Results showed that the observed curve of GG sample is a combination of erythro 1s4r and threo 1s4s. The four absorption vibrations below 33.0 cm(-1) could be assigned to phonon, inter-molecular modes and/or hydrogen bond vibrations. Terahertz spectra and Raman spectra, together with theoretical calculations, could be powerful methods for predicting contents of different isomers in sample., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The coordination behavior of a series of transition metal ions named Cr(III), Fe(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) with a mono negative tridentate guaifenesin ligand (GFS) (OOO donation sites) and 1,10-phenanthroline (Phen) is reported. The metal complexes are characterized based on elemental analyses, IR, (1)H NMR, solid reflectance, magnetic moment, molar conductance, UV-vis spectral studies, mass spectroscopy, ESR, XRD and thermal analysis (TG and DTG). The ternary metal complexes were found to have the formulae of [M(GFS)(Phen)Cl]Cl·nH2O (M=Cr(III) (n=1) and Fe(III) (n=0)), [M(GFS)(Phen)Cl]·nH2O (M=Mn(II) (n=0), Zn(II) (n=0) and Cu(II) (n=3)) and [M(GFS)(Phen)(H2O)]Cl·nH2O (M=Co(II) (n=0), Ni(II) (n=0) and Cd(II) (n=4)). All the chelates are found to have octahedral geometrical structures. The ligand and its ternary chelates are subjected to thermal analyses (TG and DTG). The GFS ligand, in comparison to its ternary metal complexes also was screened for their antibacterial activity on gram positive bacteria (Bacillus subtilis and Staphylococcus aureus), gram negative bacteria (Escherichia coli and Neisseria gonorrhoeae) and for in vitro antifungal activity against (Candida albicans). The activity data show that the metal complexes have antibacterial and antifungal activity more than the parent GFS ligand. The complexes were also screened for its in vitro anticancer activity against the Breast cell line (MFC7) and the results obtained show that they exhibit a considerable anticancer activity., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The separation of guaifenesin enantiomers by both simulated moving bed (SMB) process and Varicol process was investigated experimentally and theoretically, where the columns were packed with cellulose tris 3,5-dimethylphenylcarbamate (Chiralcel OD) stationary phase and a mixture of n-hexane and ethanol was used as mobile phase. The operation conditions were designed based on the separation region with the consideration of mass transfer resistance and axial dispersion, and the experiments to separate guaifenesin enantiomers were carried out on VARICOL-Micro unit using SMB process with the column configuration of 1/2/2/1 and Varicol process with the column configuration of 1/1.5/1.5/1, respectively. Single enantiomer with more than 99.0% purity was obtained in both processes with the productivity of 0.42 genantiomer/dcm(3) CSP for SMB process and 054 genantiomer/dcm(3) CSP for Varicol process. These experimental results obtained from SMB and Varicol processes were compared with those reported from literatures. In addition, according to the numerical simulation, the effects of solid-film mass transfer resistance and axial dispersion on the internal profiles were discussed, and the effect of column configuration on the separation performance of SMB and Varicol processes was analyzed for a few columns system. The feasibility and efficiency for the separation of guaifenesin enantiomers by SMB and Varicol processes were evaluated., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The solubility of 3-(2-methoxyphenoxy)-propane-1,2-diol, the well-known chiral drug guaifenesin 1, in water has been investigated by means of polythermal and isothermal approaches. It was found that the solubilities of racemic and enantiomeric diols rac- and (R)-1 depend strongly on temperature. The ternary phase diagram of the guaifenesin enantiomers in water in the temperature range between 10°C and 40°C was constructed. Clear evidence was obtained that rac-1 crystallizes as a stable conglomerate. The Meyerhoffer coefficient for the guaifenesin-water system is more than two and strongly depends on temperature. Neither crystalline hydrates nor polymorphs were detected within the range of conditions covered. Metastable zone width data with regard to primary nucleation were also collected for rac-1 and (R)-1. On the basis of the knowledge acquired, the resolution of racemic guaifenesin by preferential crystallization from solution could be realized successfully., (© 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.)

A novel method was developed for the simultaneous determination of guaifenesin (GUA) and ketorolac tromethamine (KET) enantiomers in plasma samples. Since GUA probably increases the absorption of coadministered drugs (e.g., KET), it would be extremely important to monitor KET plasma levels for the purpose of dose adjustment with a subsequent decrease in the side effects. Enantiomeric resolution was achieved on a polysaccharide-based chiral stationary phase, amylose-2, as a chiral selector under the normal phase (NP) mode and using ornidazole (ORN) as internal standard. This innovative method has the advantage of the ease and reliability of sample preparation for plasma samples. Sample clean-up was based on simply using methanol for protein precipitation followed by direct extraction of drug residues using ethanol. Both GUA and KET enantiomers were separated using an isocratic mobile phase composed of hexane/isopropanol/trifluoroacetic acid, 85:15:0.05 v/v/v. Peak area ratios were linear over the range 0.05-20 µg/mL for the four enantiomers S (+) GUA, R (-) GUA, R (+) KET, and S (-) KET. The method was fully validated according to the International Conference on Harmonization (ICH) guidelines in terms of system suitability, specificity, accuracy, precision, robustness, and solution stability. Finally, this procedure was innovative to apply the rationale of developing a chiral high-performance liquid chromatography (HPLC) procedure for the simultaneous quantitative analysis of drug isomers in clinical samples., (© 2014 Wiley Periodicals, Inc.)

Three dimensional (3D) printing was used as a novel medicine formulation technique for production of viable tablets capable of satisfying regulatory tests and matching the release of standard commercial tablets. Hydroxypropyl methylcellulose (HPMC 2208) (Methocel™ K100M Premium) and poly(acrylic acid) (PAA) (Carbopol(®) 974P NF) were used as a hydrophilic matrix for a sustained release (SR) layer. Hypromellose(®) (HPMC 2910) was used as a binder while microcrystalline cellulose (MCC) (Pharmacel(®) 102) and sodium starch glycolate (SSG) (Primojel(®)) were used as disintegrants for an immediate release (IR) layer. Commercial guaifenesin bi-layer tablets (GBT) were used as a model drug (Mucinex(®)) for this study. There was a favourable comparison of release of the active guaifenesin from the printed hydrophilic matrix compared with the commercially available GBT. The printed formulations were also evaluated for physical and mechanical properties such as weight variation, friability, hardness and thickness as a comparison to the commercial tablet and were within acceptable range as defined by the international standards stated in the United States Pharmacopoeia (USP). All formulations (standard tablets and 3D printed tablets) showed Korsmeyer-Peppas n values between 0.27 and 0.44 which indicates Fickian diffusion drug release through a hydrated HPMC gel layer., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The interactions of metoprolol tartrate (MPT) and guaifenesin (GF) drugs with human serum albumin (HSA) and human hemoglobin (HMG) proteins at pH 7.4 were studied by fluorescence and circular dichroism (CD) spectroscopy. Drugs quenched the fluorescence spectra of HSA and HMG proteins through a static quenching mechanism. For each protein-drug system, the values of Stern-Volmer quenching constant, bimolecular quenching constant, binding constant and number of binding site on the protein molecules were determined at 288.15, 298.15, 310.15 and 318.15 K. It was found that the binding constants of HSA-MPT and HSA-GF systems were smaller than those of HMG-MPT and HMG-GF systems. For both drugs, the affinity of HMG was much higher than that of HSA. An increase in temperature caused a negative effect on the binding reactions. The number of binding site on blood proteins for MPT and GF drugs was approximately one. Thermodynamic parameters showed that MPT interacted with HSA through electrostatic attraction forces. However, hydrogen bonds and van der Waals forces were the main interaction forces in the formation of HSA-GF, HMG-MPT and HMG-GF complexes. The binding processes between protein and drug molecules were exothermic and spontaneous owing to negative ∆H and ∆G values, respectively. The values of binding distance between protein and drug molecules were calculated from Förster resonance energy transfer theory. It was found from CD analysis that the bindings of MPT and GF drugs to HSA and HMG proteins altered the secondary structure of HSA and HMG proteins.

A hollow fiber liquid-phase microextraction technique coupled with high-performance liquid chromatography with fluorescence detection was employed for determination and evaluation of the binding characteristics of drugs to bovine serum albumin (BSA). Enantiomers of guaifenesin (an expectorant drug) were investigated as a model system. After optimization of some influencing parameters on microextraction, the proposed method was used for calculation of the target drug distribution coefficient between n-octanol and the buffer solution as well as study of drug-BSA binding in physiological conditions. The developed method shows a new, improved and simple procedure for determination of free drug concentration in biological fluids and the extent of drug-protein binding., (Copyright © 2011 John Wiley & Sons, Ltd.)

A simple, rapid, and efficient method, dispersive liquid-liquid microextraction (DLLME) coupled with high-performance liquid chromatography-fluorescence detector, has been developed for the determination of guaifenesin (GUA) enantiomers in human urine samples after an oral dose administration of its syrup formulation. Urine samples were collected during the time intervals 0-2, 2-4, and 4-6 h and concentration and ratio of two enantiomers was determined. The ratio of R-(-) to S-(+) enantiomer concentrations in urine showed an increase with time, with R/S ratios of 0.66 at 2 h and 2.23 at 6 h. For microextraction process, a mixture of extraction solvent (dichloromethane, 100 μL) and dispersive solvent (THF, 1 mL) was rapidly injected into 5.0 mL diluted urine sample for the formation of cloudy solution and extraction of enantiomers into the fine droplets of CH(2)Cl(2). After optimization of HPLC enantioselective conditions, some important parameters, such as the kind and volume of extraction and dispersive solvents, extraction time, temperature, pH, and salt effect were optimized for dispersive liquid-liquid microextraction process. Under the optimum extraction condition, the method yields a linear calibration curve in the concentration range from 10 to 2000 ng/mL for target analytes. LOD was 3.00 ng/mL for both of the enantiomers., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This paper reported the modulation of enzyme activity by organic small molecule. The esterification activity of Penicillin G acylase (PGA) was improved more than 70-fold by the addition of 10% N-methylimidazole. Some control experiments have been designed to demonstrate the catalytic specificity of PGA. The structure and the amount of additive were optimized to improve the product yield. The influence of N-methylimidazole on the PGA conformation was investigated by FTIR and autodock simulation. Seven substrates were used to evaluate the effect of structure on the PGA-catalyzed transesterification. A series of products were successfully synthesized with the yield ranged from 56% to 84% and PGA showed specific recognition on the substrate with phenyl group in the presence of 10% N-methylimidazole., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The accuracy in predicting different chemometric methods was compared when applied on ordinary UV spectra and first order derivative spectra. Principal component regression (PCR) and partial least squares with one dependent variable (PLS1) and two dependent variables (PLS2) were applied on spectral data of pharmaceutical formula containing pseudoephedrine (PDP) and guaifenesin (GFN). The ability to derivative in resolved overlapping spectra chloropheniramine maleate was evaluated when multivariate methods are adopted for analysis of two component mixtures without using any chemical pretreatment. The chemometrics models were tested on an external validation dataset and finally applied to the analysis of pharmaceuticals. Significant advantages were found in analysis of the real samples when the calibration models from derivative spectra were used. It should also be mentioned that the proposed method is a simple and rapid way requiring no preliminary separation steps and can be used easily for the analysis of these compounds, especially in quality control laboratories., (Copyright © 2011 John Wiley & Sons, Ltd.)

A simple and rapid analytical procedure was proposed for the determination of chromatographic peaks by means of partial least squares multivariate calibration (PLS) of high-performance liquid chromatography with diode array detection (HPLC-DAD). The method is exemplified with analysis of quaternary mixtures of potassium guaiacolsulfonate (PG), guaifenesin (GU), diphenhydramine HCI (DP) and carbetapentane citrate (CP) in syrup preparations. In this method, the area does not need to be directly measured and predictions are more accurate. Though the chromatographic and spectral peaks of the analytes were heavily overlapped and interferents coeluted with the compounds studied, good recoveries of analytes could be obtained with HPLC-DAD coupled with PLS calibration. This method was tested by analyzing the synthetic mixture of PG, GU, DP and CP. As a comparison method, a classsical HPLC method was used. The proposed methods were applied to syrups samples containing four drugs and the obtained results were statistically compared with each other. Finally, the main advantage of HPLC-PLS method over the classical HPLC method tried to emphasized as the using of simple mobile phase, shorter analysis time and no use of internal standard and gradient elution., (Copyright © 2010 Elsevier B.V. All rights reserved.)

The objective of this study was to investigate the influence of talc and humidity conditions during storage on the crystal growth of guaifenesin on the surface of melt-extruded matrix tablets. Tablets consisted of the model drug guaifenesin in a matrix of either Acryl-EZE(R) or Eudragit(R) L10055 and either no talc, 25% or 50% talc. After processing, the hot-melt-extruded matrix tablets were supersaturated with amorphous guaifenesin, which resulted in the development of guaifenesin drug crystals on exposed surfaces of the tablet during storage (all tablets were stored at 24 degrees C). A previously developed, quantitative test was used to assay for surface guaifenesin. In tablets with a drug-to-polymer ratio of 19:81, talc-containing tablets exhibited an earlier onset of crystal growth (storage at 17% relative humidity). The presence of talc also increased the amount of surface crystallization and was independent of the talc concentration, since the talc levels used in this study exceeded the critical nucleant concentration. Additional non-melting components did not have an additive effect on surface crystal growth. High humidity during storage (78%) increased guaifenesin crystallization, but moisture uptake of tablets did not correlate with increased drug recrystallization. When storage at 17% relative humidity was interrupted for 3days by storage at 78% relative humidity before the tablets were returned to their previous low RH storage conditions, crystal growth quickly increased during the high RH interval and remained at an elevated level throughout the remaining storage period. A similar intermediate period of low, 17% relative humidity in tablets stored before and after that time at 78% RH did not affect surface crystallization levels. The effects of humidity and talc on the crystallization of guaifenesin from melt-extruded dosage forms supersaturated with amorphous drug were ascribed to heterogeneous nucleation.

A sensitive and specific liquid chromatography-electrospray ionization-mass spectrometry method for the identification and quantification of pentoxyverine citrate and guaifenesin in human plasma has been developed. After extraction from plasma samples by ethyl acetate, the internal standard and analytes were separated by high-performance liquid chromatographic on a Shim-pack VP-ODS C(18) column (150 x 2.0 mm) using a mobile phase consisting of A (methanol) and B (0.4% glacial acetic acid and 4 mmol/L ammonium acetate) (A:B, 43 : 57). Analysis was performed on a Shimadzu LC/MS-2010A in selected ion monitoring mode with a positive electrospray ionization interface. The method was linear in the concentration range of 1.0-640.0 ng/mL for pentoxyverine citrate and 0.025-6.4 microg/mL for guaifenesin. The inter- and intra- precision were all within 12% and accuracy ranged from 85 to 115%.The lower limits of quantification were 1.0 ng/mL for pentoxyverine citrate and 25.0 ng/mL for guaifenesin. The extraction recovery was on average 81.95% for pentoxyverine citrate and 89.03% for guaifenesin. This is the first assay method reported for the simultaneous determination of pentoxyverine citrate and guaifenesin in plasma using one chromatographic run., (Copyright (c) 2009 John Wiley & Sons, Ltd.)

Objectives: This study investigated the effect of aqueous film coating on the recrystallization of guaifenesin from acrylic, hot-melt extruded matrix tablets., Methods: After hot-melt extrusion, matrix tablets were film-coated with either hypromellose or ethylcellulose. The effects of the coating polymer, curing and storage conditions, polymer weight gain, and core guaifenesin concentration on guaifenesin recrystallization were investigated., Results: The presence of either film coating on the guaifenesin-containing tablets was found to prolong the onset time of drug crystallization. The coating polymer was the most important factor determining the delay in the onset of crystallization, with the more hydrophilic polymer, hypromellose, having a higher solubilization potential for the guaifenesin and delaying crystallization for longer period (3 or 6 months in tablets stored at 40 degrees C or 25 degrees C, respectively) than the more hydrophobic ethylcellulose, which displayed a lower solubilization potential for guaifenesin (crystal growth on tablets cured for 2 hours at 60 degrees C occurred within 3 weeks, whereas uncoated tablets displayed surface crystal growth after 30 minutes). Crystal morphology was also affected by the film coating. Elevated temperatures during both curing and storage, incomplete film coalescence, and high core drug concentrations all contributed to an earlier onset of crystal growth.

In continuous chromatography simulated moving bed (SMB) is a firmly established powerful technique for the separation of fine chemicals and enantiomers. The use of a controller could improve the operation conditions and increase the productivity of an SMB unit. However, the performance of any controller is greatly affected by the reliability and the quality of the feedback information from the plant. Therefore, to overcome the limitations of optical detectors, such as UV and polarimeter, an automated on-line HPLC monitoring system was developed and installed to monitor the product streams. The performance of the system is tested experimentally separating a mixture of guaifenesin enantiomers on Chiralcel OD columns with ethanol as mobile phase in our laboratory SMB unit under both linear and nonlinear chromatographic conditions. The results show that the new monitoring system provides precise and accurate data about the concentration of the components in the two product streams. Moreover, they prove that despite disturbances a combination of the controller and the new on-line monitoring system allows to fulfill the product specifications and to improve the performance of the process in terms of feed throughput and solvent consumption.

Nitric oxide (NO) mediates activation of satellite precursor cells to enter the cell cycle. This provides new precursor cells for skeletal muscle growth and muscle repair from injury or disease. Targeting a new drug that specifically delivers NO to muscle has the potential to promote normal function and treat neuromuscular disease, and would also help to avoid side effects of NO from other treatment modalities. In this research, we examined the effectiveness of the NO donor, iosorbide dinitrate (ISDN), and a muscle relaxant, methocarbamol, in promoting satellite cell activation assayed by muscle cell DNA synthesis in normal adult mice. The work led to the development of guaifenesin dinitrate (GDN) as a new NO donor for delivering nitric oxide to muscle. The results revealed that there was a strong increase in muscle satellite cell activation and proliferation, demonstrated by a significant 38% rise in DNA synthesis after a single transdermal treatment with the new compound for 24 h. Western blot and immunohistochemistry analyses showed that the markers of satellite cell myogenesis, expression of myf5, myogenin, and follistatin, were increased after 24 h oral administration of the compound in adult mice. This research extends our understanding of the outcomes of NO-based treatments aimed at promoting muscle regeneration in normal tissue. The potential use of such treatment for conditions such as muscle atrophy in disuse and aging, and for the promotion of muscle tissue repair as required after injury or in neuromuscular diseases such as muscular dystrophy, is highlighted.

The aim of the study was to gain insight into the role of the each unit of lignin in the formation of products. Glycerol, guaiacol, the mixture of glycerol and guaiacol (Gly&Gua), and guaiacylglycerol-beta-guaiacyl ether (GGGE) were used as lignin model compounds to study fragmentation of lignin in an excess of water and p-cresol at 400 degrees C. The products have been analyzed employing gas chromatography (GC)-mass spectrometer (MS) and gas chromatography-frame ionization detector for qualitative and quantitative analysis. GC-MS analysis indicated that phenol, o-cresol, methyl-anisole, di-methyl-phenol, ethyl-methyl-phenol, 2-(hydroxy-benzyl)-4-methyl-phenol (BMP) and 2-(2-hydroxy-5-methyl-benzyl)-4-methyl-phenol were formed. The products were similar to the products by the fragmentation of lignin. The products, except o-cresol, were primarily derived from glycerol and/or guaiacol. We also found that the amount of BMP derived from GGGE, which has glycerol unit and guaiacol unit in its structure, is much more than that derived from Gly&Gua. The increase of the BMP yield by reaction with GGGE compared with (glycerol and/or guaiacol) indicates that guaiacylglycerol unit with linkage of Gly&Gua plays an important role in the formation of BMP and also it is suggested that the BMP formation from GGGE has pathways other than that from Gly&Gua.

In the absence of a suitable controller, currently simulated moving beds (SMBs) are operated suboptimally to cope with system uncertainties and to guarantee robustness of operation. Recently, we have developed a 'cycle to cycle' optimizing controller that not only makes use of minimal system information, i.e. only the Henry constants and average bed voidage, but also optimizes the process performance and taps the full economic potential of the SMB technology. The experimental implementation of the 'cycle to cycle' optimizing controller had been carried out for achiral separation. For chiral separation however, application of any online controller has not been possible because an appropriate online monitoring system has not been available. This work reports and discusses the first experimental implementation of the 'cycle to cycle' optimizing control for chiral separations. A mixture of guaifenesin enantiomers is separated on Chiralcel OD columns with ethanol as mobile phase in a eight-column four sections laboratory SMB unit. The results show that the controller, although using minimal information about the retention of the two enantiomers, is able to meet product and process specifications, can optimize the process performance, and is capable of rejecting disturbances that may occur during the operation of the SMB plant.

The purpose of the study was to investigate the physical state of hot-melt extruded guaifenesin tablets containing either Acryl-EZE or Eudragit L100-55 and to study the physicochemical factors influencing crystal growth of guaifenesin on the surface of the extrudates. The powder mixtures containing Acryl-EZE were extruded on a single-screw Randcastle Microtruder at 20rpm and at temperatures of 90, 95, 110 degrees C (zones 1, 2, 3, respectively) and 115 degrees C (die), before being manually cut into tablets (250+/-5mg). Extrudates containing Eudragit L100-55, TEC and guaifenesin were extruded at temperatures ranging from 60 to 115 degrees C. Modulated differential calorimetry (DSC) was used to demonstrate the plasticizing effect of guaifenesin on Eudragit L100-55. Powder X-ray diffraction (PXRD) showed that while the drug powder is crystalline, extrudates containing up to 25% drug exhibited an amorphous diffraction profile. Extrudates containing higher drug concentrations showed an amorphous profile with some crystalline peaks corresponding to guaifenesin, indicating that the limit of solubility of drug in the matrix had been exceeded. Scanning electron microscopy was used to demonstrate that drug crystallization was a surface phenomenon and dependent on the drug concentration. In vitro dissolution testing showed no effect of surface crystallization of guaifenesin on drug release rates of extruded matrix tablets. The influence of hydrophilic polymeric additives including PVP K25, polycarbophil, PEG 3,350, poloxamer 188 or poly(ethylene oxide) as crystal growth inhibitors was investigated at a level of 10% based on the drug content. The extent of crystal growth was reduced for all additives. Complete drug release in pH 6.8 phosphate buffer was prolonged from 4h in extrudates containing Acryl-EZE and guaifenesin to 8h in extrudates containing Eudragit L100-55, TEC and guaifenesin. Drug release in extrudates containing Eudragit L100-55 and guaifenesin was not affected by the presence of hydrophilic additives present at 10% based on the drug content. In vitro drug release studies showed no significant change during storage for up to 6 months at 25 degrees C/60% relative humidity and 40 degrees C/75% relative humidity.

Dextromethorphan (DXM) is a common component of combination cold medications that has become a popular drug of abuse for young adults. Abusers of DXM have developed a simple acid-base extraction technique to "free-base," or extract, the DXM from the unwanted guaifenesin, coloring agents, sweeteners, and alcohol that are typically included in combination cold preparations. We report a case of DXM overdose after ingestion of this purified "Crystal Dex" and discuss the "Agent Lemon" and single-phase extraction techniques that are used to free-base the dextromethorphan.

The purpose of this study was to investigate the physicochemical properties of poly(ethylene oxide) (PEO) and guaifenesin containing beads prepared by a melt-extrusion process and film-coated with a methacrylic acid copolymer. Solubility parameter calculations, thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), modulated differential scanning calorimetry (MDSC), X-ray powder diffraction (XRPD) and high performance liquid chromatography (HPLC) were used to determine drug/polymer miscibility and/or the thermal processibility of the systems. Powder blends of guaifenesin, PEO and functional excipients were processed using a melt-extrusion and spheronization technique and then film-coated in a fluidized bed apparatus. Solubility parameter calculations were used to predict miscibility between PEO and guaifenesin, and miscibility was confirmed by SEM and observation of a single melting point for extruded drug/polymer blends during MDSC investigations. The drug was stable following melt-extrusion as determined by TGA and HPLC; however, drug release rate from pellets decreased upon storage in sealed HDPE containers with silica desiccants at 40 degrees C/75% RH. The weight loss on drying, porosity and tortuosity determinations were not influenced by storage. Recrystallization of guaifenesin and PEO was confirmed by SEM and XRPD. Additionally, the pellets exhibited a change in adhesion behaviour during dissolution testing. The addition of ethylcellulose to the extruded powder blend decreased and stabilized the drug release rate from the thermally processed pellets. The current study also demonstrated film-coating to be an efficient process for providing melt-extruded beads with pH-dependent drug release properties that were stable upon storage at accelerated conditions.

Lignin is believed to be synthesized by oxidative coupling of 4-hydroxyphenylpropanoids. In native lignin there are some types of reduced structures that cannot be explained solely by oxidative coupling. In the present work we showed via biomimetic model experiments that nicotinamide adenine dinucleotide (NADH), in an uncatalyzed process, reduced a beta-aryl ether quinone methide to its benzyl derivative. A number of other biologically significant reductants, including the enzyme cellobiose dehydrogenase, failed to produce the reduced structures. Synthetic dehydrogenation polymers of coniferyl alcohol synthesized (under oxidative conditions) in the presence of the reductant NADH produced the same kind of reduced structures as in the model experiment, demonstrating that oxidative and reductive processes can occur in the same environment, and that reduction of the in situ-generated quinone methides was sufficiently competitive with water addition. In situ reduction of beta-beta-quinone methides was not achieved in this study. The origin of racemic benzyl structures in lignins therefore remains unknown, but the potential for simple chemical reduction is demonstrated here.

Mineralization of polymeric wood lignin and its substructures is a result of complex reactions involving oxidizing and reducing enzymes and radicals. The degradation of methoxyl groups is an essential part of this process. The presence of wood greatly stimulates the demethoxylation of a non-phenolic lignin model compound (a [O(14)CH(3)]-labeled beta-O-4 dimer) by the lignin-degrading white-rot fungi Phlebia radiata and Phanerochaete chrysosporium. When grown on wood, both fungi produced up to 47 and 40% (14)CO(2) of the applied (14)C activity, respectively, under air and oxygen in 8 weeks. Without wood, the demethoxylation of the dimer by both fungi was lower, varying between 0.5 and 35%. Addition of nutrient nitrogen together with glucose decreased demethoxylation when the fungi were grown on spruce wood under air. Because the evolution of (14)CO(2) in the absence of wood was poor, the fungi may have preferably used wood as a carbon and nitrogen source. The amount of fungal mycelium, as determined by the ergosterol assay, did not show connection to demethoxylation. P. radiata also showed a high demethoxylation of [O(14)CH(3)]-labeled vanillic acid in the presence of birch wood. The degradation of lignin and lignin-related substances should be studied in the presence of wood, the natural substrate for white-rot fungi.

Earlier studies have indicated that the degradation rate of poly(lactic acid) (PDLLA) can be modified by using 2,2'-bis(2-oxazoline) as a chain extender in polymer synthesis to form a lactic acid-based poly(ester-amide) (PEA). In the present study, the effect of an incorporated drug on the degradation rate of the PEA was evaluated. The model drugs, neutral guaifenesin, acidic sodium salicylate (pK(a) 3.0) and basic timolol (pK(a) 9.2), were incorporated into solvent cast PDLLA and PEA films. The drug content in the films was 2% (w/w). The degradation studies were carried out in PBS (pH 7.4, 37 degrees C); the resulting decrease in molecular weight of polymers was determined by size exclusion chromatography and the weight loss of films was measured. In addition, the drug release from the films in PBS (pH 7.4, 37 degrees C) was studied. The model drugs were released from the PDLLA and PEA films in a biphasic or triphasic manner. The final fast release phase of the drugs from both PDLLA and PEA films started when the molecular weight (M(n)) of the polymer had decreased close to 15,000 g/mol. The degradation rate of the PDLLA films was clearly enhanced by incorporated sodium salicylate or timolol. Whereas, the degradation rate of the PEA film was not enhanced by the incorporated drugs. The present results indicate that when compared to the PDLLA film, degradation rate of the PEA film in the presence of the drug is more predictable.

A new approach to galacto-oligosaccharides and galacto-conjugates synthesis performed by the beta-galactosidase from Kluyveromyces lactis is reported. The enzymatic galactosylation of eight kinds of adsorbed aromatic primary alcohols, in particular the two drugs guaifenesin and chlorphenesin, gave the corresponding beta-D-galacto-pyranosides in yields ranging between approximately 10% and 96%. For the first time, we have showed that the adsorption of acceptor substrates onto solid supports such as silica gel influences the yield and the selectivity of galacto-conjugates synthesis. In particular, we observed that adsorption of acceptor favored the synthesis of digalactosylated compounds.

The assembly of the two major cell wall components, cellulose and lignin, were investigated at the atomistic scale using molecular dynamics simulations. To this end, a molecular model of a cellulose crystal corresponding to the allomorph Ibeta and exhibiting different surfaces was considered to mimic the carbohydrate matrix present in native wood cell wall. The lignin model compound considered here is a threo guaiacyl beta-O-4 dimer. The dynamical process of adsorption of the lignin dimer onto the different surfaces of the cellulose crystal was examined. The modes of association between the two constituents were analyzed; energies of adsorption of the dimer are calculated favorable and of the same order of magnitude on all sides of the cellulosic model, suggesting that the deposition of lignin precursors onto cellulose fibers is non-specific from an enthalpic point of view. Interestingly, geometrical characteristics and energetical details of the adsorption are surface-dependent. Computed data have underlined the predominant contribution of van der Waals interactions for adsorption onto the (200) face, as well as the major influence of H-bonding interactions in the dynamical process of adsorption onto (110) and (1-10) faces. A large number of adsorption sites have been identified and a noticeable "flat" geometry of adsorption of the lignin dimer has been observed, as a consequence of the stacking interactions between lignin aromatic rings and C-H groups of cellulose. Importantly, these dispersive interactions lead to a preferential parallel orientation of lignin aromatic rings relative to the cellulose surface, notably on the (200) face. Such a parallel orientation is consistent with previously reported experimental observations.

Sustained-release wax microspheres of guaifenesin, a highly water-soluble drug, were prepared by the hydrophobic congealable disperse method using a salting-out procedure. The effects of formulation variables on the loading efficiency, particle properties, and in-vitro drug release from the microspheres were determined. The type of dispersant, the amount of wetting agent, and initial stirring time used affected the loading efficiency, while the volume of external phase and emulsification speed affected the particle size of the microspheres to a greater extent. The crystal properties of the drug in the wax matrix and the morphology of the microspheres were studied by differential scanning calorimetry (DSC), powder x-ray diffraction (XRD), and scanning electron microscopy (SEM). The DSC thermograms of the microspheres showed that the drug lost its crystallinity during the microencapsulation process, which was further confirmed by the XRD data. The electron micrographs of the drug-loaded microspheres showed well-formed spherical particles with a rough exterior.

Films containing polyethylene oxide (PEO) and a model drug, either guaifenesin (GFN) or ketoprofen (KTP), were prepared by hot-melt extrusion. The thermal properties of the hot-melt extruded films were investigated using differential scanning calorimetry (DSC). Scanning electron microscopy (SEM) was used to examine the surface morphology of the films, and wide angle X-ray diffraction (XRD) was used to investigate the crystalline properties of the polymer, drugs and physical mixtures as well as the solid state structure of the films. The stability of the polymer was studied using gel permeation chromatography. The mechanical properties, including percent elongation and tensile strength of the films, were determined on an Instron according to American Society for Testing Materials (ASTM) procedures. The Hansen solubility parameter was calculated using the Hoftyzer or van Krevelen method to estimate the likelihood of drug--polymer miscibility. Both GFN and KTP were stable during the extrusion process. Melting points corresponding to the crystalline drugs were not observed in the films. Crystallization of GFN on the surface of the film was observed at all concentrations studied, however KTP crystallization did not occur until reaching the 15% level. Guaifenesin and ketoprofen were found to decrease drive load, increase PEO stability and plasticize the polymer during extrusion. The Hansen solubility parameters predicted miscibility between PEO and KTP and poor miscibility between PEO and GFN. The predictions of the solubility parameters were in agreement with the XRD and SEM results. The percent elongation decreased with increasing GFN concentrations and significantly increased with increasing levels of KTP. Both GFN and KTP decreased the tensile strength of the extruded film.

Intramolecular H-bonding interactions were investigated in solution for the threo and erythro diastereomeric forms of a guaiacyl beta-O-4 lignin model compound by using the NMR data obtained from hydroxyl protons. Temperature coefficients of the chemical shifts (ddelta/dT) and coupling constants (3J(HCOH)) were measured in aprotic and protic solutions: DMSO-d6, acetone-d6 and acetone-d6-water. The NMR parameters do not support the existence of strong and persistent intramolecular H-bonds that could participate in the stabilization of the guaiacyl beta-O-4 structure in solution, but instead indicate that intermolecular H-bonds to solvent predominate. 1D NOE experiments nevertheless revealed the presence of a direct chemical exchange between the hydroxyl protons, suggesting the possible existence of weak and transient intramolecular H-bonding interactions. The conformational flexibility of the threo structure was also investigated in acetone solution from the measurement of long-range 1H, 1H and 1H, 13C coupling constants and from NOESY experiments. The NMR data are not consistent with any single conformation, indicating that different conformers co-exist in solution. The experimental results support the conformational flexibility predicted by molecular dynamics simulations performed in a previous study. Finally, both experimental and theoretical approaches indicate that weak intramolecular H-bonds can exist transiently in solution, breaking and reforming as the beta-O-4 molecule undergoes conformational interconversion, but cannot be invoked as possible means of conferring rigidity to the beta-O-4 structure., (Copyright 2004 John Wiley & Sons, Ltd.)

The reaction of the monomeric lignin model compound guaiacol and the beta-O-4-type dimer erol (1-(4-hydroxy-3-methoxyphenyl)-2(2-methoxyphenoxy)-propane-1,3-diol with laccase from Trametes hirsuta was studied in the presence of the mediator ABTS (2,2'-azino-di[3ethylbenzothiazoline-6-sulfonic acid]). The product mixtures were analyzed by means of aqueous-phase size exclusion chromatography (SEC) with 50 mM NaOH as eluent. Interestingly, in the laccase-catalyzed reaction with both substrates, the mediator not only functioned as an electron carrier but underwent coupling reactions with the substrate to give polymeric coupling products. The molecular weight of these copolymeric products was significantly higher than the molecular weight of products obtained without ABTS. After ultrafiltration, 33% and 21% of the initially applied ABTS could be found in the polymeric product fraction for the substrates guaiacol and erol, respectively, on the basis of nitrogen analysis. When ABTS was added to substrates after full laccase-catalyzed polymerization, the reaction proceeded toward higher molecular weights.

Cleavage of the arylglycerol beta-aryl ether linkage is the most important process in the biological degradation of lignin. The bacterial beta-etherase was described previously and shown to be tightly associated with the cellular membrane. In this study, we aimed to detect and isolate a new extracellular function that catalyses the beta-aryl ether linkage cleavage of high-molecular lignin in the soil fungi. We screened and isolated 2BW-1 cells by using a highly sensitive fluorescence assay system. The beta-aryl ether cleavage enzyme was produced by a newly isolated fungus, 2BW-1, and is secreted into the extracellular fraction. The beta-aryl ether cleavage enzyme converts the guaiacylglycerol beta-O-guaiacyl ether (GOG) to guaiacylglycerol and guaiacol. It requires the C alpha alcohol structure and p-hydroxyl group and specifically attacks the beta-aryl ether linkage of high-molecular mass lignins with addition of two water molecules at the C alpha and C beta positions.

The aqueous solubility of guaifenesin, a highly water-soluble drug, in the presence of salts, sugars, and cosolvents was determined at 25 degrees C and 40 degrees C. The solubility of drug at both temperatures was reduced with increasing concentrations of salts and sugars. The extent of reduction in drug solubility was dependent on the type of salts and sugars used. The salting-out coefficient of additives was calculated by plotting log-linear solubility profiles of the drug against the concentrations of the additives. The solubility of guaifenesin, a neutral compound, was found to be higher at lower pH values, which could be due to hydrogen-bonding effects. At 25 degrees C, glycerin, PEG 300, and propylene glycol increased the solubility of drug at low solvent concentrations while the solubility was reduced at high concentrations. At 40 degrees C, the solubility of drug was reduced at all concentrations of cosolvents. The thermodynamic events accompanying the solubility process were discussed to explain the solubility phenomena observed in the presence of additives. The reduced aqueous solubility of guaifenesin in the presence of additives greatly improved the entrapment of drug into controlled-release wax microspheres.

The threo and erythro forms of guaiacylglycerol-7'-O-methyl 8'-vanillic acid ethers, threo and erythro guaiacylglycerol 8'-vanillin ethers, and threo guaiacylglycerol 8'-(4-hydroxymethyl-2-methoxyphenyl) ether have been isolated from fruits of Boreava orientalis. Structural determinations were made on the basis of UV, MS, 1H- and 13C-NMR spectral data, including two-dimensional shift correlation. The relative configurations were assigned on the basis of 1H-NMR chemical shifts.

The degradation rate of poly(lactic acid) (PLA) is typically modified by copolymerization of the glycolide with lactide. In the present study, the degradation rate of PDLLA was modified by a novel linking of PLA with 2,2'-bis(2-oxazoline). This modification resulted in formation of a more rapidly degrading poly(ester amide) (PEA) for controlled drug release. The hydrolytic degradation of PDLLA and PEA films was studied in PBS (pH 7.4, USP XXIV, 37 degrees C); the resulting decrease in molecular weight was determined by size exclusion chromatography and the weight loss of films was measured. Drug releases of guaifenesin (mw 198.2), timolol (mw 332.4), sodium salicylate (mw 160.1) and FITC-dextran (mw 4400) from PDLLA and PEA films and microspheres were examined in PBS (pH 7.4, 37 degrees C). The degradation rate of PEA was substantially greater than that of PDLLA. The release profiles of all small model drugs (mw <332.4) from PDLLA films were biphasic or triphasic, while the release profiles of small model drugs from PEA films varied extensively. Due to the faster weight loss of PEA, FITC-dextran (mw 4400) was released substantially more rapidly from PEA microspheres than from PDLLA microspheres. In conclusion, all model drugs, except guaifenesin, were released faster from PEA preparations than from PDLLA preparations.

Study Objectives: To investigate the use of in vitro and in vivo data in the development of a sustained-release, carbomer-based dosage form (Entex LA tablets); and to compare the in vitro dissolution of pseudoephedrine from a sustained-release, hydroxypropylcellulose-based dosage form (Entex PSE tablets) and four branded competitors with different sustained-release matrixes., Design: Entex LA: In vitro testing by rotating bottle method and in vivo testing as double-blind, randomized, crossover, 24-hour study. Entex PSE and four competitors: in vitro testing by paddle method., Setting: A pharmaceutical research and development facility., Patients: Fifteen health, adult, volunteer Caucasian men between ages 18 and 40 years., Main Results: Three formulations of Entex LA, varying in carbomer content by 3-5%, were studied. As carbomer content increased, in vitro dissolution rate directionally decreased. Plasma concentrations of active ingredients guaifenesin and phenylpropanolamine were also slightly although directionally decreased. The in vitro method was sensitive to small changes in carbomer content. Larger changes in carbomer content would be required to establish an in vitro-in vivo correlation. The in vitro comparison of Entex PSE and four similar branded products showed important differences in dissolution profiles. The mean cumulative release of pseudoephedrine from Entex PSE was 39% at 1.5 hours, 62% at 4.0 hours, and 80% at 8.0 hours. The other products released pseudoephedrine more rapidly, with the two fastest-dissolving products releasing 61-62% in the first 1.5 hours., Conclusions: Sustained-release, polymer-based dosage forms such as Entex LA and Entex PSE can be complex and pose special challenges in design, development, and reformulation. For Entex LA, changes in polymer concentration and dye system influenced the in vitro (dissolution) performance. In vivo (plasma) data helped establish a defined range in which carbomer concentration could be varied to achieve the best manufacturing performance without affecting product performance. For Entex PSE and four branded competitor products, the cumulative in vitro release (dissolution) of pseudoephedrine varied widely. Release from Entex PSE was more consistent and more gradual than that from some of the comparison products. Because the absorption rate of the active ingredients pseudoephedrine and gauifenesin is governed by the dissolution rate, the observed differences suggest that the products tested may differ in biologic performance. Although in vitro dissolution data may not necessarily correlate with in vivo differences in clinical safety or efficacy, the potential for unexpected product performance may be signaled by inconsistent in vitro dissolution characteristics, especially for sustained-release dosage forms.