Search

Purpose: To assess the clinical concept of patient treatment with fixed tooth- and implant-supported restorations in a university-based undergraduate program after 13 to 15 years. Materials and Methods: In total, 30 patients (mean age 56 years) who had received multiple tooth- and implant-supported restorations were recalled after 13 to 15 years. The clinical assessment comprised biologic and technical parameters as well as patient satisfaction. Data were analyzed descriptively, and the 13- to 15-year survival rates for tooth- and implant-supported single crowns and fixed dental prostheses (FDPs) were calculated. Results: The survival rate of tooth-supported restorations amounted to 88.3% (single crowns) and 69.6% (FDPs); in implants, it reached 100% for all types of restorations. Overall, 92.4% of all restorations were free of technical complications. The most common technical complication was chipping of the veneering ceramic (tooth-supported restorations: 5.5%; implant-supported restorations: 13% to 15.9%) regardless of the material used. For tooth-supported restorations, increased probing depth = 5 mm was the most frequent biologic complication (22.8%), followed by endodontic complications of root canal-treated teeth (14%) and loss of vitality at abutment teeth (8.2%). Peri-implantitis was diagnosed in 10.2% of implants. Conclusions: The results of this study indicate that the clinical concept implemented in the undergraduate program and performed by undergraduate students works well. The clinical outcomes are similar to those reported in the literature. In general, the majority of biologic complications occur in reconstructed teeth, whereas implant-supported restorations are more prone to technical complications. [ABSTRACT FROM AUTHOR]

Purpose: To assess oral health-related quality of life (OHRQoL) and patient satisfaction with a three-implant-retained mandibular overdenture. Materials and Methods: In this randomized crossover clinical trial, 20 edentulous patients received a new set of conventional complete dentures (CDs; baseline). Subsequently, three implants were placed in the anterior mandible: two were placed in the canine regions bilaterally and one in the midline. After successful osseointegration, CDs were attached to the implants using resilient attachments. The overdenture was retained either by three implants (test group) or two implants (control group). The sequence of treatment was randomized such that each patient experienced both treatment options for 6 months each. OHRQoL was assessed at baseline and after 6 months of function for each treatment option using the Oral Health Impact Profile (OHIP-14) and visual analog scale (VAS) scores. Statistical analyses were performed using Friedman and Wilcoxon signed rank tests. Results: CD resulted in significantly higher OHIP-14 and VAS scores (25.25 + 6.42, 8.55 + 1.73) compared to both the control group (11.15 + 5.39, 4 + 2; P < .001) and the test group (6.25 + 4.02, 2.06 + 1.48; P < .001). Similarly, significantly higher mean OHIP-14 and VAS scores were noted for the control group compared to the test group (P < .001). Conclusions: Overdentures retained by three implants resulted in better OHRQoL scores and higher patient satisfaction compared to overdentures retained by two implants and CDs. [ABSTRACT FROM AUTHOR]

Abstract Background Intraoral scans (IOS) provide three-dimensional images with approximate true colors representing a possible tool in teledentistry for remote examination. The aim of the present cross-sectional validation study was, therefore, to evaluate the levels of agreement between remote diagnoses derived from IOS and diagnoses based on clinical examinations for assessing dental and periodontal conditions. Methods The test sample comprised 10 patients representing different clinical conditions. Following the acquisition of IOS (Trios, 3Shape), a full-mouth dental and periodontal examination was done and periapical radiographs were taken. Ten dentists were asked to perform dental and periodontal scorings for each of the ten patients on a tablet computer presenting the IOS. Scores included diagnosis of gingivitis/periodontitis, and evaluated presence as well as amount of plaque and calculus, and presence of teeth exhibiting gingival recession, furcation involvement, erosion, tooth wear, stain, and non-carious cervical lesion, as well as presence of decayed, filled, and crowned teeth and implants. In a second round of assessments, the periapical radiographs were provided and the dentists were able to change the scores. The time for the remote assessment was recorded. The agreement between remote and clinical scorings (reference) was then analyzed descriptively. Results The mean time for the tele assessment was 3.17 min and the additional consultation of the radiographs accounted for another 1.48 min. The sensitivity and specificity values were 0.61 and 0.39 for gingivitis and 0.67 and 0.33 for periodontitis, with no relevant changes when radiographs were provided for the diagnosis of periodontitis (0.72 and 0.28). The agreement for dichotomized dental and periodontal indices ranged between 78 and 95%. With the provision of radiographs, the remote examiners were able to detect existing filled teeth, crowned teeth, and implants, whereas the detection of decayed teeth (70%) was not improved. Conclusions The remote examination using IOS was effective in detecting dental findings, whereas periodontal conditions could not be assessed with the same accuracy. Still, remote assessment of IOS would allow a time-efficient screening and triage of patients. Improvement of the image quality of IOS may further allow to increase the accuracy of remote assessments in dentistry. According to the Swiss Regulation this investigation is not a clinical trial and therefore no registration in a WHO-registry is needed.

The objective of this study was to clinically and radiologically evaluate the performance of a short (8 mm), 1-piece, zirconia implant after an observation period of 1 year in function. A total of 47 patients with 1 missing tooth in the position of a premolar or molar were recruited. Short (8 mm), 1-piece, zirconia implants were placed and loaded after a healing period of 2 to 4 months with monolithic crowns made of 3 different materials. Implants were followed up for one year and clinically and radiologically assessed. A total of 46 implants were placed. One was excluded since no primary stability was achieved at implant placement. At the 1-year follow-up, mean marginal bone loss 1 year after loading was 0.05 ± 0.47 mm. None of the implants showed marginal bone loss greater than 1 mm or clinical signs of peri-implantitis. A total of 2 implants were lost during the healing phase and another after loading, resulting in a survival rate of 93% after 1 year. All lost implants showed a sudden increased mobility with no previous signs of marginal bone loss or peri-implant infection. The short, 8 mm, zirconia implants showed stable marginal bone levels over the short observation period of 1 year. Although they revealed slightly lower survival rates, they can be suggested for the use in sites with reduced vertical bone. Scientific data are very limited, and long-term data are not yet available, and therefore, they are needed.

Purpose: To assess the clinical, technical, and esthetic outcomes of directly veneered zirconia abutments cemented onto non-original titanium bases over 3 years.Materials and Methods: A total of 24 healthy patients with a single missing tooth in the maxilla or mandible (incisors, canines, or premolars) received a two-piece implant with a screw-retained veneered zirconia restoration extraorally cemented on a titanium base abutment. Baseline measurements and follow-up examinations were performed at 6 months, 1 year, and 3 years following loading. Radiographic, clinical, technical, and esthetic parameters were assessed. Wilcoxon signed rank test was used to analyze the data.Results: Mean marginal bone levels measured 0.54 ± 0.39 mm (median: 0.47 mm, range: 0.07 mm to 1.75 mm) at baseline and 0.52 ± 0.39 mm (median: 0.39 mm, range: 0.06 mm to 1.33 mm) at 3 years. Mean probing depth around the implants increased from 3.0 ± 0.6 mm at baseline to 3.8 ± 0.8 mm at 3 years (P = .001). Bleeding on probing changed from 27.1% ± 20.7% (baseline) to 51.5% ± 26.1% (3 years) (P = .001). The mean plaque control record amounted to 11.1% ± 21.2% (baseline) and 14.4% ± 13.89% (3 years) (P = .261). Two implants were lost at 3.5 and 30 months postloading due to peri-implantitis, resulting in a 91.7% implant survival rate. Patient satisfaction was high at 3 years.Conclusion: Zirconia restorations cemented onto the tested non-original titanium bases should not be recommended for daily clinical use, as they were associated with significant increases in BOP and PD values and varying marginal bone levels 3 years after placement. [ABSTRACT FROM AUTHOR]

Purpose: To measure the effect of simulated aging on stained resin-ceramic CAD/CAM materials regarding the durability of color and gloss. Materials and Methods: Test specimens (n = 15 per material) were prepared out of CAD/CAM ingots from two resin nanoceramics (Lava Ultimate [LVU], Cerasmart [CER]) and a polymerinfiltrated ceramic (ENA, VITA Enamic) stained with the manufacturer's recommended staining kit using photopolymerization. Control specimens were made of feldspathic ceramic (VITA Mark II [VM2]) and stained by means of ceramic firing. Negative control specimens (n = 15) (no staining) were prepared for each group. Color and gloss measurements were performed before and after each aging cycle by means of mechanical abrasion with a toothbrush. Groups were compared using Kruskal-Wallis test and paired post hoc Conover test. Changes within a group were calculated using Wilcoxon signed-rank test (α = .05). Results: The color difference (ΔE) was statistically significant for all stained CAD/CAM materials after simulated aging: CER (P < .001, 95% CI: 2.96 to 3.69), LVU (P = .004, 95% CI: 1.09 to 1.46), ENA (P = .004, 95% CI: 0.20 to 0.42), and VM2 (P < .001, 95% CI: 0.29 to 1.08). Aging resulted in a statistically significant increase in gloss in the LVU group (P < 0.001, 95% CI: 13.78 to 17.29), whereas in the ENA (P < .001, 95% CI: 7.83 to 12.72), CER (P < .001, 95% CI: 2.69 to 8.44), and VM2 (P = .014, 95% CI: 0.22 to 1.87) groups, a significant decrease in gloss was noted. Conclusion: Color and gloss of stained resin-ceramic CAD/CAM materials changed significantly after aging by means of toothbrush abrasion in vitro. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the effect of aging on the morphology of the interface between monolithic implant crowns and standardized titanium base abutments.Materials and Methods: Four groups of hybrid abutment crowns differing in restorative material (lithium disilicate [LD] or polymer-infiltrated ceramic network [PICN]) and in fabrication procedure of the interfacial zone for luting to a titanium abutment (milled during CAD/ CAM procedure [M] or prefabricated [P]) were formed: LDS-M, LDS-P, PICN-M, and PICN-P (n = 10 each). The morphology of the crown-abutment interface was examined before and after artificial aging using scanning electron microscopy. The total gap length per specimen was measured at both time points, and intergroup (Kruskal-Wallis [KW]) plus pairwise (Wilcoxon Mann-Whitney [WMW]) comparisons were performed (α = .05).Results: Before aging, statistically significant differences in gap length were identified among groups (KW: P = .0369) for PICN-P > LDS-P (WMW: P = .0496) and LDS-M > LDS-P (WMW: P = .0060). The effect of aging among the groups, expressed as an increment of total gap length, was 50% in LDS-M, 30% in LDS-P, 20% in PICN-M, and 30% in PICN-P. After aging, the statistically significant differences in gap length identified among groups (KW: P = .0048) were for PICN-P > LDS-P (WMW: P = .0134); LDS-M > PICN-M (WMW: P = .0204); PICN-P > PICN-M (WMW: P = .0486); and LDS-M > LDS-P (P = .0022). However, comparison of the difference in gap length from before to after aging among the groups was not statistically significant (KW: P = .3549).Conclusion: The cementation interfaces of CAD/CAM crowns on standardized titanium base abutments demonstrated a high percentage of gaps before and after thermomechanical loading. The composition of the restorative material and the nature of the interface influenced the interfacial gap dimension. [ABSTRACT FROM AUTHOR]

Purpose: The aim of the present study was to assess the perceptibility and acceptability threshold values for color differentiation at the restoration and mucosa levels.Materials and Methods: One restored single-tooth implant and the contralateral reference tooth were spectrophotometrically assessed in 20 patients. Perceptibility and acceptability were evaluated by dentists, dental technicians, and laypeople.Results: Dental technicians had the highest sensitivity in the perception of tooth color differences (ΔE = 2.7), followed by dentists (ΔE = 3.3) and laypeople (ΔE = 4.4). Acceptability threshold values were generally higher than perceptibility threshold in all groups. Dental technicians exhibited the highest sensitivity in the perception of mucosa color differences (50% perceptibility at ΔE = 2.65), followed by dentists (ΔE > 3.7) and laypeople (ΔE > 6).Conclusion: Color differences were tolerated with varying degrees among the three groups. Laypeople accepted higher color differences at the mucosa level. [ABSTRACT FROM AUTHOR]

Peri-implant bone dehiscences were grafted either with deproteinized bovine bone mineral (DBBM) block or with particulate DBBM, both covered with a collagen membrane and stabilized with resorbable pins. After 6 months, 17 biopsy samples were included for histologic assessment. Block and particulate DBBM rendered successful tissue integration. Particulate DBBM showed a median of 25.2% of new bone and 31.3% of bone substitute. In the block group, there was a median of 11.5% of new bone and 36.0% of bone substitute. When interpreting the discrepancy in new bone between the groups, the difference in the size of the augmented hard tissue needs to be taken into account. [ABSTRACT FROM AUTHOR]

Copyright of International Journal of Computerized Dentistry is the property of Quintessence Publishing Company Inc. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)