Search

Nucleoside antivirals are a leading class of compounds prescribed as a first-line treatment for viral infections. However, inherent limitations such as low solubility and circulation lifetime can necessitate multi-intraday dosing. Here, we deploy the 1,2-dialdehyde glyoxal to generate antiviral nucleoside prodrugs with enhanced pharmacokinetic properties and extended-release activity to combat poor patient adherence. The near-quantitative reaction of glyoxal with acyclovir (ACV) drastically improves ACV solubility and enables subsequent drug release with a half-life of 1.9 h under physiological conditions. Further, glyoxal caging thermoreversibly disrupts ACV activity against HIV-1 reverse transcription in vitro and HSV-1 pathology in cellulo . Finally, the amenability of a panel of nucleoside reverse transcriptase inhibitors to glyoxal caging showcases the potential of this highly versatile method for achieving timed-release activation of a clinically important class of antiviral therapeutics.

DNA-aptamer-functionalized electrode arrays can provide an intriguing method for detecting pathogen-derived exometabolites. This work addresses the limitations of previous aptamer-based pathogen detection methods by introducing a novel surface design that bridges the gap between initial efforts in this area and the demands of a point-of-care device. Specifically, the use of a diblock copolymer coating on a high-density microelectrode array and Cu-mediated cross coupling reactions that allow for the exclusive functionalization of that coating by any electrode or set of electrodes in the array provides a device that is stable for 1 year and compatible with the multiplex detection of small-molecule targets. The new chemistry developed allows one to take advantage of a large number of electrodes in the array with one experiment described herein capitalizing on the use of 960 individually addressable electrodes.

Adenosine-to-inosine (A-to-I) editing is one of the most widespread post-transcriptional RNA modifications and is catalyzed by adenosine deaminases acting on RNA (ADARs). Varying across tissue types, A-to-I editing is essential for numerous biological functions, and dysregulation leads to autoimmune and neurological disorders, as well as cancer. Recent evidence has also revealed a link between RNA localization and A-to-I editing, yet understanding of the mechanisms underlying this relationship and its biological impact remains limited. Current methods rely primarily on in vitro characterization of extracted RNA that ultimately erases subcellular localization and cell-to-cell heterogeneity. To address these challenges, we have repurposed endonuclease V (EndoV), a magnesium-dependent ribonuclease that cleaves inosine bases in edited RNA, to selectively bind and detect A-to-I edited RNA in cells. The work herein introduces an endonuclease V immunostaining assay (EndoVIA), a workflow that provides spatial visualization of edited transcripts, enables rapid quantification of overall inosine abundance, and maps the landscape of A-to-I editing within the transcriptome at the nanoscopic level., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Electrochemical aptamer-based sensors support the high-frequency, real-time monitoring of molecules-of-interest in vivo. Achieving this requires methods for correcting the sensor drift seen during in vivo placements. While this correction ensures EAB sensor measurements remain accurate, as drift progresses it reduces the signal-to-noise ratio and precision. Here, we show that enzymatic cleavage of the sensor's target-recognizing DNA aptamer is a major source of this signal loss. To demonstrate this, we deployed a tobramycin-detecting EAB sensor analog fabricated with the DNase-resistant "xenonucleic acid" 2'O-methyl-RNA in a live rat. In contrast to the sensor employing the equivalent DNA aptamer, the 2'O-methyl-RNA aptamer sensor lost very little signal and had improved signal-to-noise. We further characterized the EAB sensor drift using unstructured DNA or 2'O-methyl-RNA oligonucleotides. While the two devices drift similarly in vitro in whole blood, the in vivo drift of the 2'O-methyl-RNA-employing device is less compared to the DNA-employing device. Studies of the electron transfer kinetics suggested that the greater drift of the latter sensor arises due to enzymatic DNA degradation. These findings, coupled with advances in the selection of aptamers employing XNA, suggest a means of improving EAB sensor stability when they are used to perform molecular monitoring in the living body., (© 2024 Wiley-VCH GmbH.)

Nucleic acids and proteins possess encoded "languages" that can be used for information storage or to direct function. However, each biopolymer is limited to encoding its respective "language." Using a peptide nucleic acid (PNA) scaffold, nucleobase and amino acid residues can be installed on a singular backbone, enabling a single biopolymer to encode both languages. Our laboratory previously reported the development of a "bilingual" PNA biopolymer that incorporates a sequence-specific nucleic acid code interspersed with hydrophobic (alanine) and hydrophilic (lysine) amino acid residues at defined positions to produce amphiphilic character. We observed the amphiphilic amino acid residues directing the biopolymer to undergo self-assembly into micelle-like structures, while the nucleic acid recognition was harnessed for disassembly. Herein, we report a series of bilingual PNA sequences having amino acid residues with varying lengths, functional group charges, hydrophobicities, and spacings to elucidate the effect of these parameters on micelle assembly and nucleic acid recognition. Negative charges in the hydrophilic block or increased bulkiness of the hydrophobic side chains led to assembly into similarly sized micelles; however, the negative charge additionally led to increased critical micelle concentration. Upon PNA sequence truncation to decrease the spacing between side chains, the biopolymers remained capable of self-assembling but formed smaller structures. Characterization of disassembly revealed that each variant retained sequence recognition capabilities and stimuli-responsive disassembly. Together, these data show that the amino acid and nucleic acid sequences of amphiphilic bilingual biopolymers can be customized to finely tune the assembly and disassembly properties, which has implications for applications such as the encapsulation and delivery of cargo for therapeutics., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

RNA function is increasingly appreciated to be more complex than merely communicating between DNA sequence and protein structure. RNA localization has emerged as a key contributor to the intricate roles RNA plays in the cell, and the link between dysregulated spatiotemporal localization and disease warrants an exploration beyond sequence and structure. However, the tools needed to visualize RNA with precise resolution are lacking in comparison to methods available for studying proteins. In the past decade, many techniques have been developed for imaging RNA, and in parallel super resolution and single-molecule techniques have enabled imaging of single molecules in cells. Of these methods, single molecule localization microscopy (SMLM) has shown significant promise for probing RNA localization. In this review, we highlight current approaches that allow super resolution imaging of specific RNA transcripts and summarize challenges and future opportunities for developing innovative RNA labeling methods that leverage the power of SMLM., (© 2023 Wiley-VCH GmbH.)

Enzyme activity requires sequential binding and chemical transformation of substrates. While directed evolution and random mutagenesis are common methods for improving catalytic activity, these methods do not allow for independent control of K M and k cat . To achieve such control, we envisioned that the colocalization of aptamers and enzymes that act on the same molecule could increase catalytic efficiency through preconcentration of substrate. We explored this concept with cocaine esterase and anticocaine aptamers having varying K D values, both encapsulated in MS2 virus-like particles. Rate enhancements were observed with magnitudes dependent on both aptamer:enzyme stoichiometry and aptamer K D , peaking when aptamer K D and enzyme K M were roughly equivalent. This beneficial effect was lost when either aptamer binding was too tight or the aptamers were not constrained to be close to the catalyst. This work demonstrates a modular way to enhance catalysis by independently controlling substrate capture and release to the processing enzyme.

In this paper, we propose ways to address diversity, equity, and inclusion (DEI) challenges and outline steps and methodologies for creating allies and empowering leaders to support DEI efforts in science, technology, engineering, mathematics, and medicine (STEMM) for underrepresented minorities (URMs).

The deamination of adenosine to inosine is an important modification in nucleic acids that functionally recodes the identity of the nucleobase to a guanosine. Current methods to analyze and detect this single nucleotide change, such as sequencing and PCR, typically require time-consuming or costly procedures. Alternatively, fluorescent "turn-on" probes that result in signal enhancement in the presence of target are useful tools for real-time detection and monitoring of nucleic acid modification. Here we describe forced-intercalation PNA (FIT-PNA) probes that are designed to bind to inosine-containing nucleic acids and use thiazole orange (TO), 4-dimethylamino-naphthalimide (4DMN), and malachite green (MG) fluorogenic dyes to detect A-to-I editing events. We show that incorporation of the dye as a surrogate base negatively affects the duplex stability but does not abolish binding to targets. We then determined that the identity of the adjacent nucleobase and temperature affect the overall signal and fluorescence enhancement in the presence of inosine, achieving an 11-fold increase, with a limit of detection (LOD) of 30 pM. We determine that TO and 4DMN probes are viable candidates to enable selective inosine detection for biological applications., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Fluorophore bioconjugation to proteins, nucleic acids, and other important molecules can provide a powerful approach to sensing, imaging, and quantifying chemical and biological processes. One of the most prevalent methods for fluorophore attachment is through the formation of amide bonds, which are often facilitated by coupling agents to activate carboxylic acid moieties for subsequent nucleophilic attack by amines. 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methyl-morpholinium chloride (DMTMM) is among the most popular of these coupling agents for bioconjugation due to its ability to facilitate amide bond formation in water. After observing quenching of 5-fluoresceinamine (5-FAM)-conjugated oligonucleotides in the presence of DMTMM, we sought to evaluate the magnitude and scope of this challenge by surveying the effect of DMTMM on a range of fluorescent dyes. A higher quenching effect was consistently observed for xanthene dyes compared to that for cyanine dyes. Further analysis of the impact of DMTMM on FAM shows that quenching occurs independently of whether the dye is free in solution or attached to an oligonucleotide or antibody. Furthermore, we found that FAM-conjugated DNA was unable to recover its fluorescence after the removal of DMTMM, and UV-vis and NMR analyses suggest the formation of new products, such as an adduct formed between FAM and the dimethoxytriazine of DMTMM. As such, DMTMM at high concentrations is not recommended for coupling reactions where targets are fluorescently labeled. This research serves as a word of caution to those utilizing xanthene-containing fluorophores in bioconjugation reactions involving DMTMM., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

RNA editing or "epitranscriptomic modification" refers to the processing of RNA that occurs after transcription to alter the sequence or structure of the nucleic acid. These chemical alterations can be found on either the ribose sugar or the nucleobase, and although many are "silent" and do not change the Watson-Crick-Franklin code of the RNA, others result in recoding events. More than 170 RNA modifications have been identified so far, each having a specific biological purpose. Additionally, dysregulated RNA editing has been linked to several types of diseases and disorders. As new modifications are discovered and our understanding of their functional impact grows, so does the need for selective methods of identifying and mapping editing sites in the transcriptome.The most common methods for studying RNA modifications rely on antibodies as affinity reagents; however, antibodies can be difficult to generate and often have undesirable off-target binding. More recently, selective chemical labeling has advanced the field by offering techniques that can be used for the detection, enrichment, and quantification of RNA modifications. In our method using acrylamide for inosine labeling, we demonstrated the versatility with which this approach enables pull-down or downstream functionalization with other tags or affinity handles. Although this method did enable the quantitative analysis of A-to-I editing levels, we found that selectivity posed a significant limitation, likely because of the similar reactivity profiles of inosine and pseudouridine or other nucleobases.Seeking to overcome the inherent limitations of antibodies and chemical labeling methods, a more recent approach to studying the epitranscriptome is through the repurposing of proteins and enzymes that recognize modified RNA. Our laboratory has used Endonuclease V, a repair enzyme that cleaves inosine-containing RNAs, and reprogrammed it to instead bind inosine. We first harnessed EndoV to develop a preparative technique for RNA sequencing that we termed EndoVIPER-seq. This method uses EndoV to enrich inosine-edited RNAs, providing better coverage in RNA sequencing and leading to the discovery of previously undetected A-to-I editing sites. We also leveraged EndoV to create a plate-based immunoassay (EndoVLISA) to quantify inosine in cellular RNA. This approach can detect differential A-to-I editing levels across tissue types or disease states while being independent of RNA sequencing, making it cost-effective and high-throughput. By harnessing the molecular recognition capabilities of this enzyme, we show that EndoV can be repurposed as an "anti-inosine antibody" to develop new methods of detecting and enriching inosine from cellular RNA.Nature has evolved a plethora of proteins and enzymes that selectively recognize and act on RNA modifications, and exploiting the affinity of these biomolecules offers a promising new direction for the field of epitranscriptomics.

Peptide nucleic acids (PNAs) are high-affinity synthetic nucleic acid analogs capable of hybridization with native nucleic acids. PNAs synthesized having amino acid sidechains installed at the γ-position along the backbone provide a template for a single biopolymer to simultaneously encode nucleic acid and amino acid sequences. Previously, we reported the development of "bilingual" PNAs through the synthesis of an amphiphilic sequence featuring separate blocks of hydrophobic and hydrophilic amino acid functional groups. These PNAs combined the sequence-specific binding activity of nucleic acids with the structural organization properties of peptides. Like other amphiphilic compounds, these γ-PNAs were observed to assemble spontaneously into micelle-like nanostructures in aqueous solutions and disassembly was induced through hybridization to a complementary sequence. Here, we explore whether assembly of these bilingual PNAs is possible by harnessing the nucleic acid code. Specifically, we designed an amphiphile-masking duplex system in which spontaneous amphiphile assembly is prevented through hybridization to a nucleic acid masking sequence. We show that the amphiphile is displaced upon introduction of a releasing sequence complementary to the masking sequence through toehold mediated displacement. Upon release, we observe that the amphiphile proceeds to assemble in a fashion consistent with our previously reported structures. Our approach represents a novel method for controlled stimuli-responsive assembly of PNA-based nanostructures., Competing Interests: The authors report no conflicting interests., (This journal is © The Royal Society of Chemistry.)

Small molecule contaminants pose a significant threat to the environment and human health. While regulations are in place for allowed limits in many countries, detection and remediation of contaminants in more resource-limited settings and everyday environmental sources remains a challenge. Functional nucleic acids, including aptamers and DNA enzymes, have emerged as powerful options for addressing this challenge due to their ability to non-covalently interact with small molecule targets. The goal of this perspective is to outline recent efforts toward the selection of aptamers for small molecules and describe their subsequent implementation for environmental applications. Finally, we provide an outlook that addresses barriers that hinder these technologies from being widely adopted in field friendly settings and propose a path forward toward addressing these challenges., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Aptamers are widely used in small molecule detection applications due to their specificity, stability, and cost effectiveness. One key challenge in utilizing aptamers in sensors is matching the binding affinity of the aptamer to the desired concentration range for analyte detection. The most common methods for modulating affinity have inherent limitations, such as the likelihood of drastic changes in aptamer folding. Here, we propose that substituting guanosine for inosine at specific locations in the aptamer sequence provides a less perturbative approach to modulating affinity. Inosine is a naturally occurring nucleotide that results from hydrolytic deamination of adenosine, and like guanine, it base pairs with cytosine. Using the well-studied cocaine binding aptamer, we systematically replaced guanosine with inosine and were able to generate sequences having a range of binding affinities from 230 nM to 80 μM. Interestingly, we found that these substitutions could also modulate the specificity of the aptamers, leading to a range of binding affinities for structurally related analytes. Analysis of folding stability via melting temperature shows that, as expected, aptamer structure is impacted by guanosine-to-inosine substitutions. The ability to tune binding affinity and specificity through guanosine-to-inosine substitution provides a convenient and reliable approach for rapidly generating aptamers for diverse biosensing applications.

#MentorFirst (mentorfirst.org) is an initiative aimed at dispelling negative practices all-too-often still seen in academia, promoting best mentoring practices, and building a community of proactive mentors., Competing Interests: Competing interestsThe authors declare no competing interests., (© Springer Nature Limited 2022.)

Conversion of in vitro selected aptamers into functional metabolic sensors is hampered by reduced in vivo aptamer binding and limited tunability of cellular metabolite levels. In this issue of Cell Chemical Biology, Ortega et al. (2021) construct RNA sensors of fructose-6-bisphosphate (FBP) that report on metabolite levels within single yeast cells., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Small-molecule toxins pose a significant threat to human health and the environment, and their removal is made challenging by their low molecular weight. Aptamers show promise as affinity reagents for binding these toxins, and recently, aptamers have been utilized for both sensing and remediation applications. We found that functionalization of ultrafiltration membranes with aptamers provides a convenient scaffold for toxin sequestration, but our initial efforts in this area were limited by low functionalization efficiencies and the ability to only capture a single target molecule. Herein, we describe detailed optimization of our aptamer-functionalized ultrafiltration membrane system and subsequent use for simultaneous removal of multiple small-molecule toxins. We examine multiple critical components involved in fabricating and functionalizing the membranes, including PEG polymer molecular weight for membrane fabrication, grafting conditions for pMAA attachment, and coupling reagents for aptamer functionalization. This screening enabled us to identify a set of unique conditions in which we were able to achieve high flux, near quantitative yield for DNA attachment, and effective overall depletion of both toxins and bacterial cells. Furthermore, we demonstrate the attachment of multiple aptamers and subsequent parallel removal of atrazine, bisphenol A, and microcystin-LR in a complex lake water matrix. Our rigorous evaluation resulted in depletion of multiple small-molecule toxins, contaminants, and microorganisms, demonstrating the potential of aptamer-functionalized membranes as point-of-use decontamination systems.

RNA undergoes extensive biochemical modification following transcription. In addition to RNA splicing, transcripts are processed by a suite of enzymes that alter the chemical structure of different nucleobases. Broadly termed as 'RNA editing,' these modifications impart significant functional changes to translation, localization, and stability of individual transcripts within the cell. These changes are dynamic and required for a number of critical cellular processes, and dysregulation of these pathways is responsible for several disease states. Accurately detecting, measuring, and mapping different RNA modifications across the transcriptome is vital to understanding their broader functions as well as leveraging these events as diagnostic biomarkers. Here, we review recent advances in profiling several types of RNA modifications, with particular emphasis on adenosine-to-inosine (A-to-I) and N 6 -methyladenosine (m 6 A) RNA editing. We especially highlight approaches that utilize proteins to detect or enrich modified RNA transcripts before sequencing, and we summarize recent insights yielded from these techniques., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Adenosine-to-inosine (A-to-I) editing is a conserved eukaryotic RNA modification that contributes to development, immune response, and overall cellular function. Here, we utilize Endonuclease V (EndoV), which binds specifically to inosine in RNA, to develop an EndoV-linked immunosorbency assay (EndoVLISA) as a rapid, plate-based chemiluminescent method for measuring global A-to-I editing signatures in cellular RNA. We first optimize and validate our assay with chemically synthesized oligonucleotides. We then demonstrate rapid detection of inosine content in treated cell lines, demonstrating equivalent performance against current standard RNA-seq approaches. Lastly, we deploy our EndoVLISA for profiling differential A-to-I RNA editing signatures in normal and diseased human tissue, illustrating the utility of our platform as a diagnostic bioassay. Together, the EndoVLISA method is cost-effective, straightforward, and utilizes common laboratory equipment, offering a highly accessible new approach for studying A-to-I editing. Moreover, the multi-well plate format makes this the first assay amenable for direct high-throughput quantification of A-to-I editing for applications in disease detection and drug development., (© 2021 Wiley-VCH GmbH.)

Aptamers are widely employed as recognition elements in small molecule biosensors due to their ability to recognize small molecule targets with high affinity and selectivity. Structure-switching aptamers are particularly promising for biosensing applications because target-induced conformational change can be directly linked to a functional output. However, traditional evolution methods do not select for the significant conformational change needed to create structure-switching biosensors. Modified selection methods have been described to select for structure-switching architectures, but these remain limited by the need for immobilization. Herein we describe the first homogenous, structure-switching aptamer selection that directly reports on biosensor capacity for the target. We exploit the activity of restriction enzymes to isolate aptamer candidates that undergo target-induced displacement of a short complementary strand. As an initial demonstration of the utility of this approach, we performed selection against kanamycin A. Four enriched candidate sequences were successfully characterized as structure-switching biosensors for detection of kanamycin A. Optimization of biosensor conditions afforded facile detection of kanamycin A (90 μM to 10 mM) with high selectivity over three other aminoglycosides. This research demonstrates a general method to directly select for structure-switching biosensors and can be applied to a broad range of small-molecule targets., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Peptide nucleic acid (PNA) is a unique synthetic nucleic acid analog that has been adopted for use in many biological applications. These applications rely upon the robust Franklin-Watson-Crick base pairing provided by PNA, particularly at lower ionic strengths. However, our understanding of the relationship between the kinetics of PNA:DNA hybridization and ionic strength is incomplete. Here we measured the kinetics of association and dissociation of PNA with DNA across a range of ionic strengths and temperatures at single-molecule resolution using total internal reflection fluorescence imaging. Unlike DNA:DNA duplexes, PNA:DNA duplexes are more stable at lower ionic strength, and we demonstrate that this is due to a higher association rate. While the dissociation rate of PNA:DNA duplexes is largely insensitive to ionic strength, it is significantly lower than that of DNA:DNA duplexes having the same number and sequence of base pairing interactions. The temperature dependence of PNA:DNA kinetic rate constants indicate a significant enthalpy barrier to duplex dissociation, and to a lesser extent, duplex formation. This investigation into the kinetics of PNA:DNA hybridization provides a framework towards better understanding and design of PNA sequences for future applications., Competing Interests: The authors declare no competing interests., (This journal is © The Royal Society of Chemistry.)

Controlling the structure and activity of nucleic acids dramatically expands their potential for application in therapeutics, biosensing, nanotechnology, and biocomputing. Several methods have been developed to impart responsiveness of DNA and RNA to small-molecule and light-based stimuli. However, heat-triggered control of nucleic acids has remained largely unexplored, leaving a significant gap in responsive nucleic acid technology. Moreover, current technologies have been limited to natural nucleic acids and are often incompatible with polymerase-generated sequences. Here we show that glyoxal, a well-characterized compound that covalently attaches to the Watson-Crick-Franklin face of several nucleobases, addresses these limitations by thermoreversibly modulating the structure and activity of virtually any nucleic acid scaffold. Using a variety of DNA and RNA constructs, we demonstrate that glyoxal modification is easily installed and potently disrupts nucleic acid structure and function. We also characterize the kinetics of decaging and show that activity can be restored via tunable thermal removal of glyoxal adducts under a variety of conditions. We further illustrate the versatility of this approach by reversibly caging a 2'- O -methylated RNA aptamer as well as synthetic threose nucleic acid (TNA) and peptide nucleic acid (PNA) scaffolds. Glyoxal caging can also be used to reversibly disrupt enzyme-nucleic acid interactions, and we show that caging of guide RNA allows for tunable and reversible control over CRISPR-Cas9 activity. We also demonstrate glyoxal caging as an effective method for enhancing PCR specificity, and we cage a biostable antisense oligonucleotide for time-release activation and titration of gene expression in living cells. Together, glyoxalation is a straightforward and scarless method for imparting reversible thermal responsiveness to theoretically any nucleic acid architecture, addressing a significant need in synthetic biology and offering a versatile new tool for constructing programmable nucleic acid components in medicine, nanotechnology, and biocomputing.

Straightforward methods for detecting adenosine-to-inosine (A-to-I) RNA editing are key to a better understanding of its regulation, function, and connection with disease. We address this need by developing a novel reagent, N-(4-ethynylphenyl)acrylamide (EPhAA), and illustrating its ability to selectively label inosine in RNA. EPhAA is synthesized in a single step, reacts rapidly with inosine, and is "click"-compatible, enabling flexible attachment of fluorescent probes at editing sites. We first validate EPhAA reactivity and selectivity for inosine in both ribonucleosides and RNA substrates, and then apply our approach to directly monitor in vitro A-to-I RNA editing activity using recombinant ADAR enzymes. This method improves upon existing inosine chemical-labeling techniques and provides a cost-effective, rapid, and non-radioactive approach for detecting inosine formation in RNA. We envision this method will improve the study of A-to-I editing and enable better characterization of RNA modification patterns in different settings., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Adenosine to-inosine (A-to-I) RNA editing is a conserved post-transcriptional modification that is critical for a variety of cellular processes. A-to-I editing is widespread in nearly all types of RNA, directly imparting significant global changes in cellular function and behavior. Dysfunctional RNA editing is also implicated in a number of diseases, and A-to-I editing activity is rapidly becoming an important biomarker for early detection of cancer, immune disorders, and neurodegeneration. While millions of sites have been identified, the biological function of the majority of these sites is unknown, and the regulatory mechanisms for controlling editing activity at individual sites is not well understood. Robust detection and mapping of A-to-I editing activity throughout the transcriptome is vital for understanding these properties and how editing affects cellular behavior. However, accurately identifying A-to-I editing sites is challenging because of inherent sampling errors present in RNA-seq. We recently developed Endonuclease V immunoprecipitation enrichment sequencing (EndoVIPER-seq) to directly address this challenge by enrichment of A-to-I edited RNAs prior to sequencing. This protocol outlines how to process cellular RNA, enrich for A-to-I edited transcripts with EndoVIPER pulldown, and prepare libraries suitable for generating RNA-seq data. © 2020 Wiley Periodicals LLC. Basic Protocol 1: mRNA fragmentation and glyoxalation Basic Protocol 2: EndoVIPER pulldown Basic Protocol 3: RNA-seq library preparation and data analysis., (© 2020 Wiley Periodicals LLC.)

Oligonucleotide aptamers can be converted into structure-switching biosensors by incorporating a short, typically labeled oligonucleotide that is complementary to the analyte-binding region. Binding of a target analyte can disrupt the hybridization equilibrium between the aptamer and the labeled-complementary oligo producing a concentration-dependent signal for target-analyte sensing. Despite its importance in the performance of a biosensor, the mechanism of analyte-response of most structure-switching aptamers is not well understood. In this work, we employ single-molecule fluorescence imaging to investigate the competitive kinetics of association of a labeled complementary oligonucleotide and a target analyte, l-tyrosinamide (L-Tym), interacting with an L-Tym-binding aptamer. The complementary readout strand is fluorescently labeled, allowing us to measure its hybridization kinetics with individual aptamers immobilized on a surface and located with super-resolution techniques; the small-molecule L-Tym analyte is not labeled in order to avoid having an attached dye molecule impact its interactions with the aptamer. We measure the association kinetics of unlabeled L-Tym by detecting its influence on the hybridization of the labeled complementary strand. We find that L-Tym slows the association rate of the complementary strand with the aptamer but does not impact its dissociation rate, suggesting an S N 1-like mechanism where the complementary strand must dissociate before L-Tym can bind. The competitive model revealed a slow association rate between L-Tym and the aptamer, producing a long-lived L-Tym-aptamer complex that blocks hybridization with the labeled complementary strand. These results provide insight about the kinetics and mechanism of analyte recognition in this structure-switching aptamer, and the methodology provides a general means of measuring the rates of unlabeled-analyte binding kinetics in aptamer-based biosensors.

Creating accurate maps of A-to-I RNA editing activity is vital to improving our understanding of the biological role of this process and harnessing it as a signal for disease diagnosis. Current RNA sequencing techniques are susceptible to random sampling limitations due to the complexity of the transcriptome and require large amounts of RNA material, specialized instrumentation, and high read counts to accurately interrogate A-to-I editing sites. To address these challenges, we show that Escherichia coli Endonuclease V (eEndoV), an inosine-cleaving enzyme, can be repurposed to bind and isolate A-to-I edited transcripts from cellular RNA. While Mg 2+ enables eEndoV to catalyze RNA cleavage, we show that similar levels of Ca 2+ instead promote binding of inosine without cleavage and thus enable high affinity capture of inosine in RNA. We leverage this capability to demonstrate EndoVIPER-seq (Endonuclease V inosine precipitation enrichment sequencing) as a facile and effective method to enrich A-to-I edited transcripts prior to RNA-seq, producing significant increases in the coverage and detection of identified editing sites. We envision the use of this approach as a straightforward and cost-effective strategy to improve the epitranscriptomic informational density of RNA samples, facilitating a deeper understanding of the functional roles of A-to-I editing.

The heteroduplex hybridization thermodynamics of DNA with either RNA or TNA are greatly affected by DNA pyrimidine content, where increased DNA pyrimidine content leads to significantly increased duplex stability. Little is known, however, about the effect that purine or pyrimidine content has on the hybridization kinetics of these duplexes. In this work, single-molecule imaging is used to measure the hybridization kinetics of oligonucleotides having varying DNA pyrimidine content with complementary DNA, RNA, and TNA sequences. Results suggest that the change in duplex stability from DNA pyrimidine content (corresponding to purine content in the complementary TNA or RNA) is primarily due to changes in the dissociation rate, and not single-strand ordering or other structural changes that increase the association rate. Decreases in heteroduplex hybridization rates with pyrimidine content are similar for RNA and TNA, indicating that TNA behaves as a kinetic analogue for RNA.

Nature encodes the information required for life in two fundamental biopolymers: nucleic acids and proteins. Peptide nucleic acid (PNA), a synthetic analog comprised of nucleobases arrayed along a pseudopeptide backbone, has the ability to combine the power of nucleic acids to encode information with the versatility of amino acids to encode structure and function. Historically, PNA has been perceived as a simple nucleic acid mimic having desirable properties such as high biostability and strong affinity for complementary nucleic acids. In this feature article, we aim to adjust this perception by highlighting the ability of PNA to act as a peptide mimic and showing the largely untapped potential to encode information in the amino acid sequence. First, we provide an introduction to PNA and discuss the use of conjugation to impart tunable properties to the biopolymer. Next, we describe the integration of functional groups directly into the PNA backbone to impart specific physical properties. Lastly, we highlight the use of these integrated amino acid side chains to encode peptide-like sequences in the PNA backbone, imparting novel activity and function and demonstrating the ability of PNA to simultaneously mimic both a peptide and a nucleic acid.

Fluorescence microscopy has dramatically advanced our understanding of the processes that drive biological systems by enabling the imaging and tracking of biomolecules of interest inside of living cells. In particular, proteins of interest can be genetically tagged with fluorescent proteins or labeled with small molecule fluorophore probes to enable visualization. However, both of these methods are generally limited in signal-to-background resolution and options are limited for achieving temporal control over labeling. Photoreactive "fluorogenic" dyes can overcome these limitations and enable user-defined crosslinking with low background fluorescence. In this chapter, we discuss current approaches for live cell protein labeling with particular emphasis on the novel use of photoreactive fluorogenic dyes for protein imaging. We further describe in detail the synthesis and characterization of a fluorogenic malachite green probe functionalized with a photoreactive diazirine crosslinker and illustrate how to apply this probe toward covalent photoaffinity labeling and imaging of target proteins in live cells., (© 2020 Elsevier Inc. All rights reserved.)

Nucleic acids and proteins are the fundamental biopolymers that support all life on Earth. Nucleic acids store large amounts of information in nucleobase sequences while peptides and proteins utilize diverse amino acid functional groups to adopt complex structures and perform wide-ranging activities. Although nature has evolved machinery to read the nucleic acid code and translate it into amino acid code, the extant biopolymers are restricted to encoding amino acid or nucleotide sequences separately, limiting their potential applications in medicine and biotechnology. Here we describe the design, synthesis, and stimuli-responsive assembly behavior of a bilingual biopolymer that integrates both amino acid and nucleobase sequences into a single peptide nucleic acid (PNA) scaffold to enable tunable storage and retrieval of tertiary structural behavior and programmable molecular recognition capabilities. Incorporation of a defined sequence of amino acid side-chains along the PNA backbone yields amphiphiles having a "protein code" that directs self-assembly into micellar architectures in aqueous conditions. However, these amphiphiles also carry a "nucleotide code" such that subsequent introduction of a complementary RNA strand induces a sequence-specific disruption of assemblies through hybridization. Together, these properties establish bilingual PNA as a powerful biopolymer that combines two information systems to harness structural responsiveness and sequence recognition. The PNA scaffold and our synthetic system are highly generalizable, enabling fabrication of a wide array of user-defined peptide and nucleotide sequence combinations for diverse future biomedical and nanotechnology applications.

The highly competitive nature of academic environments might seem to suggest that success can only be obtained at the cost of taking good care of oneself. However, sacrificing self-care can be extremely harmful. Herein, we explore ways that high performance and self-care can be mutually reinforcing and produce long-term success., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The development of high fidelity polymerases and streamlined synthesis of threose nucleic acid (TNA) triphosphates and phosphoramidites has made TNA accessible as a motif for generating nuclease-resistant high-affinity aptamers, antisense oligos, and synthetic genetic biopolymers. Little is known, however, about the thermostability trends of TNA:DNA duplexes. Here we investigate the thermostability of 14 TNA:DNA duplexes with the goal of elucidating the fundamental factors governing TNA:DNA duplex stability. We find that purine content in TNA significantly influences the stability and conformation of TNA:DNA duplexes. Low TNA purine content destabilizes duplexes, with T m values often 5 °C lower than analogous DNA:DNA and RNA:DNA duplexes. By contrast, TNA:DNA duplexes having high TNA purine content display greater stability than DNA:DNA or RNA:DNA duplexes having the same sequences. High TNA purine content leads TNA:DNA duplexes to adopt conformations similar to RNA:RNA (A-form) configuration, whereas duplexes with low TNA purine content have conformations more similar to DNA:DNA (B-form) configuration. These insights provide a basis for understanding and predicting TNA:DNA duplex stability, which is anticipated to guide the practical use of TNA in biotechnology applications.

Genetically encoded fluorescent proteins or small-molecule probes that recognize specific protein binding partners can be used to label proteins to study their localization and function with fluorescence microscopy. However, these approaches are limited in signal-to-background resolution and the ability to temporally control labeling. Herein, we describe a covalent protein labeling technique using a fluorogenic malachite green probe functionalized with a photoreactive cross-linker. This enables a controlled covalent attachment to a genetically encodable fluorogen activating protein (FAP) with low background signal. We demonstrate covalent labeling of a protein in vitro as well as in live mammalian cells. This method is straightforward, displays high labeling specificity, and results in improved signal-to-background ratios in photoaffinity labeling of target proteins. Additionally, this probe provides temporal control over reactivity, enabling future applications in real-time monitoring of cellular events.

Navigating scientific challenges, persevering through difficulties, and coping with failure are considered hallmarks of a successful scientist. However, relatively few studies investigate how undergraduate science, technology, engineering, and mathematics (STEM) students develop these skills and dispositions or how instructors can facilitate this development in undergraduate STEM learning contexts. This is a critical gap, because the unique cultures and practices found in STEM classrooms are likely to influence how students approach challenges and deal with failures, both during their STEM education and in the years that follow. To guide research aimed at understanding how STEM students develop a challenge-engaging disposition and the ability to adaptively cope with failure, we generate a model representing hypotheses of how students might approach challenges and respond to failures in undergraduate STEM learning contexts. We draw from theory and studies investigating mindset, goal orientations, attributions, fear of failure, and coping to inform our model. We offer this model as a tool for the community to test, revise, elaborate, or refute. Finally, we urge researchers and educators to consider the development, implementation, and rigorous testing of interventions aimed at helping students develop a persevering and challenge-engaging disposition within STEM contexts.

Biomolecular assembly is a key driving force in nearly all life processes, providing structure, information storage, and communication within cells and at the whole organism level. These assembly processes rely on precise interactions between functional groups on nucleic acids, proteins, carbohydrates, and small molecules, and can be fine-tuned to span a range of time, length, and complexity scales. Recognizing the power of these motifs, researchers have sought to emulate and engineer biomolecular assemblies in the laboratory, with goals ranging from modulating cellular function to the creation of new polymeric materials. In most cases, engineering efforts are inspired or informed by understanding the structure and properties of naturally occurring assemblies, which has in turn fueled the development of predictive models that enable computational design of novel assemblies. This Review will focus on selected examples of protein assemblies, highlighting the story arc from initial discovery of an assembly, through initial engineering attempts, toward the ultimate goal of predictive design. The aim of this Review is to highlight areas where significant progress has been made, as well as to outline remaining challenges, as solving these challenges will be the key that unlocks the full power of biomolecules for advances in technology and medicine.

Aptamers are short nucleic-acid biopolymers selected to have high affinity and specificity for protein or small-molecule target analytes. Aptamers can be engineered into split-aptamer biosensors comprising two nucleic acid strands that coassemble as they bind to a target, resulting in a large signal change from attached molecular probes (e.g., molecular beacons). The kinetics of split-aptamer assembly and their dependence on target recognition are largely unknown; knowledge of these kinetics could help in design and optimization of split-aptamer biosensors. In this work, we measure assembly kinetics of cocaine-dependent split-aptamer molecules using single-molecule fluorescence imaging. Assembly is monitored between a DNA strand tethered to a glass substrate and solutions containing the other strand tagged with a fluorescent label, with varying concentrations of the cocaine analyte. Dissociation rates are measured by tracking individual molecules and measuring their bound lifetimes. Dissociation-time distributions are biexponential, possibly indicating different folded states of the aptamer. The dissociation rate of only the longer-lived complex decreases with cocaine concentration, suggesting that cocaine stabilizes the long-lived aptamer complex. The variation in the slow dissociation rate with cocaine concentration is well described with an equilibrium-binding model, where the dissociation rate approaches a saturation limit consistent with the dissociation-equilibrium constant for cocaine-binding to the split aptamer. This single-molecule methodology provides a sensitive readout of cocaine-binding based on the dissociation kinetics of the split aptamer, allowing one to distinguish target-dependent aptamer assembly from background assembly. This methodology could be used to study other systems where target association affects the stability of aptamer duplexes.

Adenosine-to-inosine (A-to-I) RNA editing is a widespread and conserved post-transcriptional modification, producing significant changes in cellular function and behavior. Accurately identifying, detecting, and quantifying these sites in the transcriptome is necessary to improve our understanding of editing dynamics, its broader biological roles, and connections with diseases. Chemical labeling of edited bases coupled with affinity enrichment has enabled improved characterization of several forms of RNA editing. However, there are no approaches currently available for pull-down of inosines. To address this need, we explore acrylamide as a labeling motif and report here an acrylamidofluorescein reagent that reacts with inosine and enables enrichment of inosine-containing RNA transcripts. This method provides improved sensitivity in the detection and identification of inosines toward a more comprehensive transcriptome-wide analysis of A-to-I editing. Acrylamide derivatization is also highly generalizable, providing potential for the labeling of inosine with a wide variety of probes and affinity handles.

Despite advances in XNA evolution, the binding capabilities of artificial genetic polymers are currently limited to protein targets. Here, we describe the expansion of in vitro evolution techniques to enable selection of threose nucleic acid (TNA) aptamers to ochratoxin A (OTA). This research establishes the first example of an XNA aptamer of any kind to be evolved having affinity to a small-molecule target. Selection experiments against OTA yielded aptamers having affinities in the mid nanomolar range; with the best binders possessing KD values comparable to or better than those of the best previously reported DNA aptamer to OTA. Importantly, the TNA can be incubated in 50% human blood serum for seven days and retain binding to OTA with only a minor change in affinity, while the DNA aptamer is completely degraded and loses all capacity to bind the target. This not only establishes the remarkable biostability of the TNA aptamer, but also its high level of selectivity, as it is capable of binding OTA in a large background of competing biomolecules. Together, this research demonstrates that refining methods for in vitro evolution of XNA can enable the selection of aptamers to a broad range of increasingly challenging target molecules.

Fluorescence-activated cell sorting (FACS) offers a powerful approach to high-throughput library screening in directed evolution experiments. However, FACS is rarely used in the evolution of stereoselective enzymes, due to the difficulty of designing fluorescence-based assays for measuring enantiopurity. Here, we describe a new FACS-based enantiopurity analysis approach that overcomes these limitations by using enantiomeric DNA biosensors labeled with orthogonal fluorophores. By co-encapsulating the biosensors with a mixture of target enantiomers in microfluidic droplets, we could demonstrate the use of FACS to differentiate between droplets having various levels of target enantiopurity. We envision the utility of this method for high-throughput screening of enantiopurity in the directed evolution of stereoselective enzymes, thereby facilitating the discovery of new asymmetric biocatalysts for the synthesis of pharmaceuticals and other high-value chemicals., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Branched DNAs (bDNAs) having comb-like structures have found wide utility in molecular diagnostics and DNA nanotechnology. bDNAs can be generated either by designing and assembling linear DNA molecules into rigid non-covalent structures or by using an orthogonally protected branching unit to synthesize covalently linked structures. Despite the advantages of the covalently linked structures, use of this motif has been hampered by the challenging synthesis of appropriately protected branching monomers. We report the facile synthesis of a branching monomer having orthogonal DMT and Lev protecting groups using readily available δ-velarolactone and 1,3-diaminopropan-2-ol. Using this branching monomer, a comb-shaped bDNA was synthesized having three different DNA arms. The synthesis and hybridization capability of the bDNA was assessed by fluorescence microscopy using fluorescently labeled complementary and mismatched DNA probes. Convenient access to an orthogonally protected branching monomer is anticipated to accelerate applications of bDNAs in applications including diagnostics, biosensing, gene-profiling, DNA computing, multicolor imaging, and nanotechnology.

Course-based undergraduate research experiences (CUREs) have gained traction as effective ways to expand the impact of undergraduate research while fulfilling pedagogical goals. In this Perspective, we present innovative ways to incorporate fundamental benefits and principles of CUREs into a classroom environment through information/technology-based research projects that lead to student-generated contributions to digital community resources (CoRes). These projects represent an attractive class of CUREs because they are less resource-intensive than laboratory-based CUREs, and the projects align with the expectations of today's students to create rapid and publicly accessible contributions to society. We provide a detailed discussion of two example types of CoRe projects that can be implemented in courses to impact research and education at the chemistry-biology interface: bioinformatics annotations and development of educational tools. Finally, we present current resources available for faculty interested in incorporating CUREs or CoRe projects into their pedagogical practices. In sharing these stories and resources, we hope to lower the barrier for widespread adoption of CURE and CoRe approaches and generate discussions about how to utilize the classroom experience to make a positive impact on our students and the future of the field of biochemistry.

Next-generation sequencing (NGS) has proven to be an exceptionally powerful tool for studying genetic variation and differences in gene expression profiles between cell populations. However, these population-wide studies are limited by their inability to detect variation between individual cells within a population, inspiring the development of single-cell techniques such as Drop-seq, which add a unique barcode to the mRNA from each cell prior to sequencing. Current Drop-seq technology enables capture, amplification, and barcoding of the entire mRNA transcriptome of individual cells. NGS can then be used to sequence the 3'-end of each message to build a cell-specific transcriptional landscape. However, current technology does not allow high-throughput capture of information distant from the mRNA poly-A tail. Thus, gene profiling would have much greater utility if beads could be generated having multiple transcript-specific capture sequences. Here we report the use of a reversible chain blocking group to enable synthesis of DNA barcoded beads having capture sequences for the constant domains of the T-cell receptor α and β chain mRNAs. We demonstrate that these beads can be used to capture and pair TCRα and TCRβ sequences from total T-cell RNA, enabling reverse transcription and PCR amplification of these sequences. This is the first example of capture beads having more than one capture sequence, and we envision that this technology will be of high utility for applications such as pairing the antigen receptor chains that give rise to autoimmune diseases or measuring the ratios of mRNA splice variants in cancer stem cells.

Three β,γ-modified α-l-threofuranosyl nucleoside triphosphates were synthesized. The β,γ-modified tTTPs undergo a single incorporation event with HIV RT but undergo multiple incorporations to form full-length product with engineered thermophilic polymerases., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Nucleic acid aptamers have emerged as a promising alternative to antibodies for use as recognition elements in therapeutics, bioimaging, and analytical applications. A key benefit that aptamers possess relative to antibodies is their ability to be chemically synthesized. This advantage, coupled with the broad range of modified nucleotide building blocks that can be constructed using chemical synthesis, has enabled the discovery and development of modified aptamers having extraordinary affinity, specificity, and biostability. Early efforts to generate modified aptamers focused on selection of a native DNA or RNA aptamer, followed by post-selection trial-and-error testing of modifications. However, recent advances in polymerase engineering and templated nucleic acid synthesis have enabled the direct selection of aptamers having modified backbones and nucleobases. This review will discuss these technological advances and highlight the improvements in aptamer function that have been realized through in vitro selection of non-natural nucleic acids., (Copyright © 2016 Elsevier Inc. All rights reserved.)

We investigate the effect of buffer identity, ionic strength, pH, and organic cosolvents on the rate of strain-promoted azide-alkyne cycloaddition with the widely used DIBAC cyclooctyne. The rate of reaction between DIBAC and a hydrophilic azide is highly tolerant to changes in buffer conditions but is impacted by organic cosolvents. Thus, bioconjugation reactions using DIBAC can be carried out in the buffer that is most compatible with the biomolecules being labeled, but the use of organic cosolvents should be carefully considered.

Aptamer-based sensors provide a versatile and effective platform for the detection of chemical and biological targets. These sensors have been optimized to function in multiple formats, however, a remaining limitation is the inability to achieve temporal control over their sensing function. To overcome this challenge, we took inspiration from nature's ability to temporally control the activity of enzymes and protein receptors through covalent self-caging. We applied this strategy to structure-switching aptamer sensors through the installation of a cleavable linker between the two DNA fragments that comprise the sensor. Analogous to self-caged proteins, installation of this linker shifts the equilibrium of the aptamer sensor to disfavor target binding. However, activity can be restored in a time-resolved manner by cleavage of the linker. To demonstrate this principle, we chose a photocleavable linker and found that installation of the linker eliminates target binding, even at high target concentrations. However, upon irradiation with 365 nm light, sensor activity is restored with response kinetics that mirror those of the linker cleavage reaction. A key benefit of our approach is generality, which is demonstrated by grafting the photocleavable linker onto a different aptamer sensor and showing that an analogous level of temporal control can be achieved for sensing of the new target molecule. These results demonstrate that nature's self-caging approach can be effectively applied to non-natural receptors to provide precise temporal control over function. We envision that this will be of especially high utility for deploying aptamer sensors in biological environments.

Unzipping of double-stranded nucleic acids by an electric field applied across a wild-type α-hemolysin (αHL) nanopore provides structural information about different duplex forms. In this work, comparative studies on A-form DNA-RNA duplexes and B-form DNA-DNA duplexes with a single-stranded tail identified significant differences in the blockage current and the unzipping duration between the two helical forms. We observed that the B-form duplex blocks the channel 1.9 ± 0.2 pA more and unzips ∼15-fold more slowly than an A-form duplex at 120 mV. We developed a model to describe the dependence of duplex unzipping on structure. We demonstrate that the wider A-form duplex (d = 2.4 nm) is unable to enter the vestibule opening of αHL on the cis side, leading to unzipping outside of the nanopore with higher residual current and faster unzipping times. In contrast, the smaller B-form duplexes (d = 2.0 nm) enter the vestibule of αHL, resulting in decreased current blockages and slower unzipping. We investigated the effects of varying the length of the single-stranded overhang, and studied A-form DNA-PNA duplexes to provide additional support for the proposed model. This study identifies key differences between A- and B-form duplex unzipping that will be important in the design of future probe-based methods for detecting DNA or RNA., (Copyright © 2016 Biophysical Society. Published by Elsevier Inc. All rights reserved.)