Search

With the advances in skeletal muscle tissue engineering, new platforms have arisen with important applications in biology studies, disease modeling, and drug testing. Current developments highlight the quest for engineering skeletal muscle tissues with higher complexity that can better mimicThe authors review the latest advances inIn recent years, more sophisticated

Biofabrication approaches, such as three-dimensional (3D) bioprinting of hydrogels, have recently garnered increasing attention, especially in the construction of 3D structures that mimic the complexity of tissues and organs with the capacity for cytocompatibility and post-printing cellular development. However, some printed gels show poor stability and maintain less shape fidelity if parameters such as polymer nature, viscosity, shear-thinning behavior, and crosslinking are affected. Therefore, researchers have incorporated various nanomaterials as bioactive fillers into polymeric hydrogels to address these limitations. Carbon-family nanomaterials (CFNs), hydroxyapatites, nanosilicates, and strontium carbonates have been incorporated into printed gels for application in various biomedical fields. In this review, following the compilation of research publications on CFNs-containing printable gels in various tissue engineering applications, we discuss the types of bioprinters, the prerequisites of bioink and biomaterial ink, as well as the progress and challenges of CFNs-containing printable gels in this field.

Hybrid-crosslinked systems, which can be formed using heat and visible light, are significant for improving the stability of hydrogels under physiological conditions. However, several challenges for their practical application remain, such as shrinking under culture medium conditions or the neutral pH in the small intestine. Therefore, a multi-sensitive hydrogel with response to external conditions has been designed and prepared, which could be employed as a biopolymer ink formulation for three-dimensional printing in bioengineering applications. When exposed to body temperature and visible light, the N-succinyl hydroxybutyl methacrylated chitosan (NS-HBC-MA) undergoes a sol-gel phase transition. The NS-HBC-MA hydrogel exhibits pH-responsive swelling, effectively preventing shrinkage at a neutral pH. Furthermore, NS-HBC-MA hydrogel demonstrates excellent biocompatibility and biodegradability. This study demonstrates that the NS-HBC-MA hydrogel has significant potential for various applications, including wound healing, delivery systems, and tissue engineering.

Bioengineering of tissues and organs has the potential to generate functional replacement organs. However, achieving the full-thickness vascularization that is required for long-term survival of living implants has remained a grand challenge, especially for clinically sized implants. During the pre-vascular phase, implanted engineered tissues are forced to metabolically rely on the diffusion of nutrients from adjacent host-tissue, which for larger living implants results in anoxia, cell death, and ultimately implant failure. Here it is reported that this challenge can be addressed by engineering self-oxygenating tissues, which is achieved via the incorporation of hydrophobic oxygen-generating micromaterials into engineered tissues. Self-oxygenation of tissues transforms anoxic stresses into hypoxic stimulation in a homogenous and tissue size-independent manner. The in situ elevation of oxygen tension enables the sustained production of high quantities of angiogenic factors by implanted cells, which are offered a metabolically protected pro-angiogenic microenvironment. Numerical simulations predict that self-oxygenation of living tissues will effectively orchestrate rapid full-thickness vascularization of implanted tissues, which is empirically confirmed via in vivo experimentation. Self-oxygenation of tissues thus represents a novel, effective, and widely applicable strategy to enable the vascularization living implants, which is expected to advance organ transplantation and regenerative medicine applications. ispartof: ADVANCED FUNCTIONAL MATERIALS vol:31 issue:42 ispartof: location:Germany status: published

BACKGROUND: Three-dimensional (3D) printing using hydrogel has made great strides when it comes to mimicking 3D artificial tissue in the medical field. However, most structures do not mimic the dynamic movement of the tissues. Without imitating dynamic movements, there are limitations on the extent to which the proper implementation of the tissue's own functions can be achieved. METHOD: In this study, we intend to present an approach to solving this problem using hydroxybutyl methacrylated chitosan (HBC-MA), a photo-crosslinkable/temperature reversible chitosan polymer. In addition, stereolithography-3D (SLA-3D) printing technology was used, which is more likely to mimic the complex microstructure. As a control, a 3D structure made with pristine poly(ethylene glycol) dimethacrylate (PEG-DMA) was created, and a 4D structure was prepared by adding HBC-MA to poly(ethylene glycol) dimethacrylate (PEG-DMAP) resin. RESULTS: HBC-MA caused the expansion of water into the polymer matrix at low temperature, and the 4D structure resulted in expansion of the polymer volume, generating dynamic movement due to the expansion of water. Conversely, as the temperature rose, deswelling occurred, followed by a decrease in the volume, showing a shape memory property of returning to the existing structure. Morphological, swelling, and mechanical analysis further confirmed the principle of dynamic movement. In addition, parameters were provided through calculation of the bending ratio angle (θ). CONCLUSION: Through this, it is suggested that HBC-MA can be applied as a core polymer for SLA-4D printing, and has high potential for realizing the dynamic movement of tissue. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s13770-020-00264-6) contains supplementary material, which is available to authorized users.

Herein, we introduce a flexible, biocompatible, robust and conductive electrospun fiber mat as a substrate for flexible and stretchable electronic devices for various biomedical applications. To impart the electrospun fiber mats with electrical conductivity, poly(3,4-ethylenedioxythiophene) (PEDOT), a conductive polymer, was interpenetrated into nitrile butadiene rubber (NBR) and poly(ethylene glycol) dimethacrylate (PEGDM) crosslinked electrospun fiber mats. The mats were fabricated with tunable fiber orientation, random and aligned, and displayed elastomeric mechanical properties and high conductivity. In addition, bending the mats caused a reversible change in their resistance. The cytotoxicity studies confirmed that the elastomeric and conductive electrospun fiber mats support cardiac cell growth, and thus are adaptable to a wide range of applications, including tissue engineering, implantable sensors and wearable bioelectronics.

Bioavailability and bone loss inhibitory effects of vitamin D2 derived from UV-irradiated shiitake mushroom were determined in vivo. The effect of the absence of ovaries on the bioavailability of vitamin D2 and bone structure was also investigated. Sham operated (sham) and ovariectomized (OVX) rats were divided in 3 groups according to their diets, i.e. control: only vitamin D-deficient diets; UV(X): vitamin D-deficient diets with non-irradiated mushroom powder; UV(O): vitamin D-deficient diets with irradiated mushroom powder. The obtained results showed that vitamin D2 from shiitake mushroom was able to increase bone mineral density and trabecular bone structure of femur bone as well as its bioavailability. The absence of estrogen induced adverse effects not only on bioavailability of vitamin D2 but also on trabecular bone. In conclusion, vitamin D2-fortified shiitake mushroom might help postmenopausal women increase vitamin D2 bioavailability and retard trabecular bone loss. Abbreviations: OVX: ovariectomized; 25(OH)D: 25-hydroxyvitamin D; 1,25(OH)2D: 1,25-dihydroxyvitamin D; BMD: bone mineral density; micro-CT: micro computed tomography; RSM: response surface methodology; RP-HPLC: Reverse phase-high performance liquid chromatography; MS/MS: tandem mass spectrometry; E2: estradiol; NTx: N-terminal telopeptide of type I collagen; BV/TV: bone volume/total volume; BS/BV: bone surface/bone volume; Tb.Th: trabecular thickness; Tb.Sp: trabecular separation.

To reduce the required capital and time investment in the development of new pharmaceutical agents, there is an urgent need for preclinical drug testing models that are predictive of drug response in human tissues or organs. Despite tremendous advancements and rigorous multistage screening of drug candidates involving computational models, traditional cell culture platforms, animal models and most recently humanized animals, there is still a large deficit in our ability to predict drug response in patient groups and overall attrition rates from phase 1 through phase 4 of clinical studies remain well above 90%. Organ-on-a-chip (OOC) platforms have proven potential in providing tremendous flexibility and robustness in drug screening and development by employing engineering techniques and materials. More importantly, in recent years, there is a clear upward trend in studies that utilize human-induced pluripotent stem cell (hiPSC) to develop personalized tissue or organ models. Additionally, integrated multiple organs on the single chip with increasingly more sophisticated representation of absorption, distribution, metabolism, excretion and toxicity (ADMET) process are being utilized to better understand drug interaction mechanisms in the human body and thus showing great potential to better predict drug efficacy and safety. In this review, we summarize these advances, highlighting studies that took the next step to clinical trials and research areas with the utmost potential and discuss the role of the OOCs in the overall drug discovery process at a preclinical and clinical stage, as well as outline remaining challenges.

Bioengineered functional muscle tissues are beneficial for regenerative medicine due to their treatment potential for various debilitating disorders, including myopathy and traumatic injuries. However, the contractile properties of engineered muscle constructs are lacking compared with their native counterparts. Here, we used microfluidic spinning to fabricate photocrosslinkable gelatin methacryloyl (GelMA) hydrogel fibres with well-defined surface morphologies for engineering muscle tissues. We examined whether the combination of topographical cues from surface micropatterning and biochemical stimulation with recombinant agrin can improve the generation of bioengineered muscle tissue. Topographical cues on micropatterned fibres promoted alignment of C2C12 myoblasts and augmented myotube formation during differentiation, as assessed by increased myotube length, aspect ratio, and the elevated mRNA expression of myogenic genes. Moreover, agrin treatment significantly increased acetylcholine receptor expression/clustering and myotube formation and upregulated dystrophin expression in differentiated C2C12 myotubes. Interestingly, the combination of topographical cues with agrin treatment further enhanced myotube maturation and functionality as shown by improved contractility under electrical stimulation. Thus, combining topographical cues and agrin treatment improved functions of engineered muscle tissue, which has potential in biorobotics, drug screening, tissue engineering, and regenerative medicine.

Cell transplantation therapy provides a potential solution for treating skeletal muscle disorders, but cell survival after transplantation is poor. This limitation could be addressed by grafting donor cells onto biomaterials to protect them against harsh environments and processing, consequently improving cell viability in situ. Thus, we present here the fabrication of poly(lactic-co-glycolic acid) (PLGA) ultrathin ribbons with “canal-like” structures using a microfabrication technique to generate ribbons of aligned murine skeletal myoblasts (C2C12). We found that the ribbons functionalized with a solution of 3,4-dihydroxy-l-phenylalanine (DOPA) and then coated with poly-l-lysine (PLL) and fibronectin (FN) improve cell attachment and support the growth of C2C12. The viability of cells on the ribbons is evaluated following the syringe-handling steps of injection with different needle sizes. C2C12 cells readily adhere to the ribbon surface, proliferate over time, align (over 74%), maintain high viability (o...

Hydrogel-based scaffolds have been widely used to fabricate artificial tissues capable of replacing tissues and organs. However, several challenges inherent in fabricating tissues of large size and complex morphology using such scaffolds while ensuring cell viability remain. To address this problem, we synthesized gelatin methacryloyl (GelMA) based bioink with cells for fabricating a scaffold with superior characteristics. The bioink was grafted onto a Z-stacking bioprinter that maintained the cells at physiological temperature during the printing process, without exerting any physical pressure on the cells. Various parameters, such as the bioink composition and light exposure time, were optimized. The printing accuracy of the scaffolds was evaluated using photorheological studies. The internal morphology of the scaffolds at different time points was analyzed using electron microscopy. The Z-stacked scaffolds were fabricated using high-speed printing, with the conditions optimized to achieve high model reproducibility. Stable adhesion and high proliferation of cells encapsulated within the scaffold were confirmed. We introduced various strategies to improve the accuracy and reproducibility of Z-stack GelMA bioprinting while ensuring that the scaffolds facilitated cell adhesion, encapsulation, and proliferation. Our results demonstrate the potential of the present method for various applications in tissue engineering.

Bioink based 3D bioprinting is a promising new technology that enables fabrication of complex tissue structures with living cells. The printability of the bioink depends on the physical properties such as viscosity. However, the high viscosity bioink puts shear stress on the cells and low viscosity bioink cannot maintain complex tissue structure firmly after the printing. In this work, we applied dual crosslinkable bioink using Kappa-carrageenan (&kappa, CA) to overcome existing shortcomings. &kappa, CA has properties such as biocompatibility, biodegradability, shear-thinning and ionic gelation but the difficulty of controlling gelation properties makes it unsuitable for application in 3D bioprinting. This problem was solved by synthesizing methacrylated Kappa-carrageenan (MA-&kappa, CA), which can be dual crosslinked through ionic and UV (Ultraviolet) crosslinking to form hydrogel using NIH-3T3 cells. Through MA substitutions, the rheological properties of the gel could be controlled to reduce the shear stress. Moreover, bioprinting using the cell-laden MA-&kappa, CA showed cell compatibility with enhanced shape retention capability. The potential to control the physical properties through dual crosslinking of MA-&kappa, CA hydrogel is expected to be widely applied in 3D bioprinting applications.

A simple biosensor with 1,1'-oxalyldiimidazole chemiluminescence (ODI-CL) detection capable of rapidly quantifying and screening alkaline phosphatase (ALP) in raw and pasteurized milk was developed as an indicator for confirming whether commercial milk is properly pasteurized. Fluorescein was formed when standards containing 1.0% milk with different activities of ALP and samples containing 1.0% raw milk were incubated with fluorescein diphosphate (FDP) for 15 min at room temperature. The relative CL intensity of fluorescein measured with the addition of 80 mM H2O2 and ODI formed from the reaction of 2.0 μM bis(2,4,6-trichlorophenyl) oxalate and 10.0 μM 4-methyl imidazole in ethyl acetate was proportional to the concentration of ALP in milk. The range (39∼2500 mU/L) of linear calibration curve (R2 = 0.998) for the quantification of ALP in milk using ODI-CL detection was wider than those using currently applied fluorescence and 1,2-dioxetane CL detections. Also, the limit of detection (3.7 mU/L) determined using the former detection, which has good precision, was lower than those reported using the latter detections. In conclusion, the cost-effective and highly sensitive biosensor with ODI-CL detection can be applied to monitor whether milk is pasteurized according to acceptable ALP activities threshold level (350 mU/L) for public safety newly adopted by US and EU and the internal investigation level (100 mU/L) proposed by EU.

Thermo-sensitive injectable hydrogels that spontaneously react to physiological temperature have been widely studied to be used in biomedical fields. However, several challenges on their unstable structures with large-sized pores and low mechanical strength under physiological conditions must be addressed to enable their practical applications. We synthesized the hydroxybutyl methacrylated chitosan (HBC-MA) hydrogel that possesses both thermo-sensitive and photo-crosslinkable properties. The HBC-MA showed effective sol-gel transition under physiological temperature as well as a sensitive photo-crosslinkable property with visible light capable of skin penetration. The co-nonsolvency property and thermo-sensitivity of HBC-MA prevented unintended loss of the hydrogel graft after being subcutaneously injected in mice. Subsequently applied visible light on the skin beneath which the hydrogel was injected significantly improved the mechanical strength and stability of the graft. The injectable HBC-MA hydrogel developed in this study can be applicable to a wide range of biomedical fields such as drug delivery system and tissue engineering.

The printability of materials used in extrusion based 3D printing is one of the most important properties especially when fabricating objects with architectural complexities. However, this parameter is influenced by several factors (temperature, components, and additives) which makes thorough evaluation and classification challenging. In this study, the printability of food-ink for 3D food printing applications was evaluated by systematically adapting evaluation techniques such as dimensional stability test, handling properties assessment, and shear rheology test using edible hydrocolloid as reference materials. Methylcellulose (MC) was selected as a suitable reference material for its capability to simulate the printability of various types of food applications. In dimensional stability test, the concentrations of reference hydrocolloid mixture that could fabricate structures with height of 20, 40, and 80 mm without significant collapse were 9%, 11%, and 13%, respectively. The deformation behavior and handling properties of printed foods were classified based on the reference material produced at various concentrations (5%–20%). Shear modulus of all samples were in complete agreement with simulation results based on the dimensional stability test indicating that the printability of foods can be predicted and classified by comparing its properties to reference material. The newly established classification system of printability was categorized into grades A, B, C, and D according to the dimensional stability and degree of handling. The validity of this classification system was verified by 3D-printing tests.

This study investigates the potential complications in applying nanoclay‐based waterborne coating to packaging films for food with high moisture content. Multilayer packaging films were prepared by dry laminating commercially available polyvinyl alcohol (PVA)/vermiculite nanocomposite coating films and linear low‐density polyethylene film, and the changes in oxygen barrier properties were investigated according to different relative humidity using 3 types of food simulants. When the relative humidity was above 60%, the oxygen permeability increased sharply, but this was reversible. Deionized water and 3% acetic acid did not cause any large structural change in the PVA/vermiculite nanocomposite but caused a reversible deterioration of the oxygen barrier properties. In contrast, 50% ethanol, a simulant for the semifatty food, induced irreversible structural changes with deterioration of the oxygen barrier property. These changes are due to the characteristics of PVA rather than vermiculite. We believe this manuscript would be of interest to the wide group of researchers, organizations, and companies in the field of developing nanoclay‐based gas barrier packaging for foods with high moisture content. Hence, we wish to diffuse our knowledge to the scientific community.

In this study, composite gelatin-polyaniline (PANI) nanofibers doped with camphorsulfonic acid (CSA) were fabricated by electrospinning and used as substrates to culture C2C12 myoblast cells. We observed enhanced myotube formation on composite gelatin-PANI nanofibers compared to gelatin nanofibers, concomitantly with enhanced myotube maturation. Thus, in myotubes, intracellular organization, colocalization of the dihydropyridine receptor (DHPR) and ryanodine receptor (RyR), expression of genes correlated to the excitation-contraction (E-C) coupling apparatus, calcium transients, and myotube contractibility were increased. Such composite material scaffolds combining topographical and electrically conductive cues may be useful to direct skeletal muscle cell organization and to improve cellular maturation, functionality, and tissue formation.

There is a continuing attempt to study cell to cell interactions to control the growth, function, and differentiation of cells. One approach that can be utilized to assess representative cell to cell interactions is by using three-dimensional cell spheroids, also referred to as cell aggregates, generated by adhering cells to each other through cell-adhesion molecules such as cadherin. Compared with conventional two-dimensional cell monolayer, cell spheroid offers more realistic platform to predict cell behavior in high-throughput manner. To recapitulate the cell spheroid formation in vitro, microwell-mediated culture system has become a robust and efficient tool for providing uniform-sized spheroids. In this review, we first iterate the recent developments and innovations in microwell-mediated cell culture platform, focusing on formation and function of cell spheroids using various cells such as embryonic stem cells, postnatal stem cells, and somatic cells. Furthermore, the recent advancements in applications of cell spheroids generated from microwell-mediated culture system is covered in this article. The discussion on the integrative biology regarding cell to cell interaction and other biological events in cell spheroid is another focal point of this review.

Since the delivery kinetics of different cell types are different, the signal from the target cell is greatly affected by the noise signal of the diagnostic system. This is a major obstacle hindering the practical application of intracellular diagnostic systems, such as tumor heterogeneity. To address these issues, here we present a microRNA detection platform using fluorescence-encoded nanostructured DNA-based probes. The nanostructured DNA was designed to include molecular beacons for detecting cytosolic microRNA as well as additional fluorophores. When the intracellular diagnostic system is delivered, fluorescence signals are generated by the molecular beacons, depending on the concentration of the target microRNA. The fluorescence signals are then normalized to the intensity of the additional fluorophore. Through this simple calculation, the concentration of intracellular microRNA can be determined without interference from the diagnosis system itself. And also it enabled discrimination of microRNA expression heterogeneity in five different breast cancer cell lines.

A stem cell tracking system is in high demand for the determination of cell destinations and for the validation of cell therapeutic efficacy in regenerative transplantation. To date, near-infrared (NIR) imaging technology has received considerable attention in cell behavior monitoring, owing to its patient compatibility, easy accessibility and cost effectiveness. Conventionally, in vivo cell tracking has been visualized by direct in-cell staining with NIR, where it may be achieved by complicated genetic engineering. Such genetic amendment techniques have suffered from serious challenges, which can destroy a cell's metabolism and can accidentally incur unexpected carcinoma. Herein we demonstrate a novel cell nano-modulation method for noninvasive stem cell monitoring. It is simply achieved by conjugating stem cells with lipid-supported, NIR-tagged, polymeric nanoparticles. These engineered cells, which are designated as NIR-labeled light-emitting stem cells (LESCs), maintain their biochemical functionality (i.e., differentiation, quantum efficacy, etc.) even after conjugation. LESCs were used for in situ stem cell monitoring at inoculation sites. It is speculated that the LESC technique could provide a new preparative methodology for in vivo cell tracking in advanced diagnostic medicine, where cell behavior is a critical issue.

In this study, the suitability of gelatin methacryloyl (GelMA) nanogels for transdermal delivery of macromolecules was demonstrated. The synthesis of GelMA nanogels (GNs) and fluorescein isothiocyanate labelled bovine serum albumin (FITC-BSA) loaded GelMA nanogels (FGNs) were implemented when confined in water-in-oil nanoemulsion droplets via the photopolymerization of the methacryloyl substituents to create crosslinked nanogels. Both GNs and FGNs existed as fine particles in aqueous condition (pH 7.4) for 7 days. No distinct aggregation of nanogel particles were observed. In the MTT assay, high percentage of cell viability indicated that GNs did not exhibit any growth inhibitory effect or significant cytotoxicity. The skin penetration study results showed that FGNs permeated across the epidermis and into the dermis of a porcine model when compared to the FITC-BSA dissolved in PBS. Possible penetration routes of FITC-BSA through the stratum corneum (SC) were illustrated by visualizing the SC structure with fluorescent signals of FITC-BSA. The penetration mechanism of FGNs across the SC layer was successfully demonstrated by explaining three penetration routes (intercellular, follicular, and transcellular route). The results suggest that GNs have a potential as a transdermal delivery carrier for hydrophilic macromolecules.

The gelatin extracted from mammals of porcine and bovine has been prominently used in pharmaceutical, medical, and cosmetic products. However, there have been some concerns for their usage due to religious, social and cultural objections, and animal-to-human infectious disease. Recently, gelatin from marine by-products has received growing attention as an alternative to mammalian gelatin. In this study, we demonstrate the formation of nanogels (NGs) using fish gelatin methacryloyl (GelMA) and their application possibility to the drug delivery system. The fabrication of fish GelMA NGs is carried out by crosslinking through the photopolymerization of the methacryloyl substituent present in the nanoemulsion droplets, followed by purification and redispersion. There were different characteristics depending on the aqueous phase in the emulsion and the type of solvent used in redispersion. The PBS-NGs/D.W., which was prepared using PBS for the aqueous phase and D.W. for the final dispersion solution, had a desirable particle size (&lt, 200 nm), low PdI (0.16), and high drug loading efficiency (77%). Spherical NGs particles were observed without aggregation in TEM images. In vitro release tests of doxorubicin (DOX)-GelMA NGs showed the pH-dependent release behavior of DOX. Also, the MTT experiments demonstrated that DOX-GelMA NGs effectively inhibited cell growth, while only GelMA NGs exhibit higher percentages of cell viability. Therefore, the results suggest that fish GelMA NGs have a potential for nano-carrier as fine individual particles without the aggregation and cytotoxicity to deliver small-molecule drugs.

Bioavailability and bone loss inhibitory effects of vitamin D

Biologically active materials from marine sources have been receiving increasing attention as they are free from the transmissible diseases and religious restrictions associated with the use of mammalian resources. Among various other biomaterials from marine sources, alginate and fish gelatin (f-gelatin), with their inherent bioactivity and physicochemical tunability, have been studied extensively and applied in various biomedical fields such as regenerative medicine, tissue engineering, and pharmaceutical products. In this study, by using alginate and f-gelatin&rsquo, s chemical derivatives, we developed a marine-based interpenetrating polymer network (IPN) hydrogel consisting of alginate and f-gelatin methacryloyl (f-GelMA) networks via physical and chemical crosslinking methods, respectively. We then evaluated their physical properties (mechanical strength, swelling degree, and degradation rate) and cell behavior in hydrogels. Our results showed that the alginate/f-GelMA hydrogel displayed unique physical properties compared to when alginate and f-GelMA were used separately. These properties included high mechanical strength, low swelling and degradation rate, and an increase in cell adhesive ability. Moreover, for the first time, we introduced and optimized the application of alginate/f-GelMA hydrogel in a three-dimensional (3D) bioprinting system with high cell viability, which breaks the restriction of their utilization in tissue engineering applications and suggests that alginate/f-GelMA can be utilized as a novel bioink to broaden the uses of marine products in biomedical fields.

Online detection and accurate quantification of superoxide anions released from skeletal muscle tissue is important in both physiological and pathological contexts. Above certain physiologically redundant levels, superoxides may exert toxic effects. Here we present design, fabrication, and successful testing of a highly sensitive electrochemical superoxide biosensor based on nanoporous gold (NPG) immobilized with cytochrome-c (cyt-c). A significant 14-fold enhancement in the biosensor sensitivity was achieved using NPG instead of nonporous gold, enabling the device to quantify minuscule levels of superoxides. Such improvement was attributed to the very large surface-to-volume ratio of the NPG network. The average values of superoxide sensitivity and analytical limit of detection (LOD) were 1.90 ± 0.492 nA nM–1 cm–2 and 3.7 nM, respectively. The sensor was employed to measure the rates of superoxide release from C2C12 myoblasts and differentiated myotubes upon stimulation with an endogenous superoxide-prod...