11 results on '"Hsuan-Lin Lai"'
Search Results
2. Prescription pattern and effectiveness of antihypertensive drugs in patients with aortic dissection who underwent surgery
- Author
-
Kuang-Ming Liao, Chuan-Wei Shen, Yun-Hui Huang, Chun-Hui Lu, Hsuan-Lin Lai, and Chung-Yu Chen
- Subjects
aortic dissection ,prescription patterns ,antihypertensive drugs ,β-blockers ,angiotensin-converting enzyme inhibitor ,angiotensin receptor blocker ,Therapeutics. Pharmacology ,RM1-950 - Abstract
Background: Surgical patients with aortic dissection often require multiple antihypertensive drugs to control blood pressure. However, the prescription pattern and effectiveness of antihypertensive drugs for these patients are unclear. We aimed to investigate the prescription pattern and effectiveness of different classes of antihypertensive drugs in surgical patients with aortic dissection.Methods: Newly diagnosed aortic dissection patients who underwent surgery, aged >20 years, from 1 January 2012 to 31 December 2017 were identified. Patients with missing data, in-hospital mortality, aortic aneurysms, or congenital connective tissue disorders, such as Marfan syndrome, were excluded. Prescription patterns of antihypertensive drugs were identified from medical records of outpatient visits within 90 days after discharge. Antihypertensive drugs were classified into four classes: 1) β-blockers, 2) calcium channel blockers (CCBs), 3) renin–angiotensin system, and 4) other antihypertensive drugs. Patients were classified according to the number of classes of antihypertensive drugs as follows: 1) class 0, no exposure to antihypertensive drugs; 2) class 1, antihypertensive drugs of the same class; 3) class 2, antihypertensive drugs of two classes; 4) class 3, antihypertensive drugs of three classes; or 5) class 4, antihypertensive drugs of four classes. The primary composite outcomes included rehospitalization associated with aortic dissection, death due to aortic dissection, and all-cause mortality.Results: Most patients were prescribed two (28.87%) or three classes (28.01%) of antihypertensive drugs. In class 1, β-blockers were most commonly used (8.79%), followed by CCBs (5.95%). In class 2, β-blockers+CCB (10.66%) and CCB+RAS (5.18%) were the most common drug combinations. In class 3, β-blockers + CCB+RAS (14.84%) was the most prescribed combination. Class 0 had a significantly higher hazard of the composite outcome (HR, 2.1; CI, 1.46–3.02; p < 0.001) and all-cause mortality (HR, 2.34; CI, 1.56–3.51; p < 0.001) than class 1. There were no significant differences in hazards for rehospitalization associated with aortic dissection among classes.Conclusion: Among operated patients with type A aortic dissection, no specific type of antihypertensive drug was associated with a better outcome, whereas among those with type B aortic dissection, the use of β-blockers and CCBs was related to a significantly lower risk of the composite outcome.
- Published
- 2023
- Full Text
- View/download PDF
3. Adherence and treatment patterns of disease-specific drugs among patients with pulmonary arterial hypertension: A nationwide, new-user cohort study
- Author
-
Cheng-Yu Tsai, Chuan-Wei Shen, Hsuan-Lin Lai, and Chung-Yu Chen
- Subjects
pulmonary arterial hypertension ,treatment patterns ,medication adherence ,pharmacoepidemiogy ,proportion of days covered ,Therapeutics. Pharmacology ,RM1-950 - Abstract
Background: Pulmonary arterial hypertension (PAH) is an incurable pulmonary disease that might result in right heart failure and death. Treatment guidelines recommend upfront or sequential combination therapy for patients with PAH. Recently, several PAH-targeted medications have been approved in Taiwan. This study aimed to investigate treatment patterns and medication adherence in real-world settings.Method: This was a new-user design study on patients treated with PAH-specific medication between 1 January 2014, and 31 December 2019. Data were extracted from the National Health Insurance Research Database. Medication adherence was evaluated by the proportion of days covered (PDC). Adherence was defined as PDC ≥ .8. Statistical analyses were performed to compare the study outcomes. Logistic regression analysis was performed to identify the association between baseline characteristics and adherence. P < .05 indicated statistical significance.Results: A total of 1,900 patients with PAH were identified, and 75.3% of them were females. The mean (standard deviation (SD)) age was 57.2 (17.5) years. Only 23 (1.2%) patients began the initial combination therapy. A total of 148 (7.8%) patients switched their initial treatment to another treatment, and 159 (8.4%) patients had sequential combination therapy. The most common combination therapy was endothelin receptor antagonist (ERA) plus phosphodiesterase-5 inhibitor (PDE5i), mostly macitentan plus sildenafil, for initial or sequential combination. The mean (SD) PDC was .71 (.33), and 1,117 (58.8%) patients were adherent. A significant difference in mean PDC was observed between initial ERA users and PDE5i users (p < .0001). No factor was significantly associated with medication adherence.Conclusion: Patients with PAH mostly initiated sildenafil as monotherapy, and macitentan was added as a sequential combination therapy. The initial ERA and combination groups showed higher medication adherence. Further investigations are needed to identify other factors associated with adherence.
- Published
- 2023
- Full Text
- View/download PDF
4. Prescription pattern and effectiveness of antihypertensive drugs in patients with aortic dissection who underwent surgery.
- Author
-
Kuang-Ming Liao, Chuan-Wei Shen, Yun-Hui Huang, Chun-Hui Lu, Hsuan-Lin Lai, and Chung-Yu Chen
- Subjects
AORTIC dissection ,DRUG efficacy ,CALCIUM antagonists ,ARACHNOID cysts ,ANGIOTENSIN-receptor blockers ,ANTIHYPERTENSIVE agents ,AORTIC aneurysms ,ACE inhibitors - Abstract
Background: Surgical patients with aortic dissection often require multiple antihypertensive drugs to control blood pressure. However, the prescription pattern and effectiveness of antihypertensive drugs for these patients are unclear. We aimed to investigate the prescription pattern and effectiveness of different classes of antihypertensive drugs in surgical patients with aortic dissection. Methods: Newly diagnosed aortic dissection patients who underwent surgery, aged >20 years, from 1 January 2012 to 31 December 2017 were identified. Patients with missing data, in-hospital mortality, aortic aneurysms, or congenital connective tissue disorders, such as Marfan syndrome, were excluded. Prescription patterns of antihypertensive drugs were identified from medical records of outpatient visits within 90 days after discharge. Antihypertensive drugs were classified into four classes: 1) β-blockers, 2) calcium channel blockers (CCBs), 3) renin-angiotensin system, and 4) other antihypertensive drugs. Patients were classified according to the number of classes of antihypertensive drugs as follows: 1) class 0, no exposure to antihypertensive drugs; 2) class 1, antihypertensive drugs of the same class; 3) class 2, antihypertensive drugs of two classes; 4) class 3, antihypertensive drugs of three classes; or 5) class 4, antihypertensive drugs of four classes. The primary composite outcomes included rehospitalization associated with aortic dissection, death due to aortic dissection, and all-cause mortality. Results: Most patients were prescribed two (28.87%) or three classes (28.01%) of antihypertensive drugs. In class 1, β-blockers were most commonly used (8.79%), followed by CCBs (5.95%). In class 2, β-blockers+CCB (10.66%) and CCB+RAS (5.18%) were the most common drug combinations. In class 3, β-blockers + CCB+RAS (14.84%) was the most prescribed combination. Class 0 had a significantly higher hazard of the composite outcome (HR, 2.1; CI, 1.46-3.02; p < 0.001) and all-cause mortality (HR, 2.34; CI, 1.56-3.51; p < 0.001) than class 1. There were no significant differences in hazards for rehospitalization associated with aortic dissection among classes. Conclusion: Among operated patients with type A aortic dissection, no specific type of antihypertensive drug was associated with a better outcome, whereas among those with type B aortic dissection, the use of β-blockers and CCBs was related to a significantly lower risk of the composite outcome. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
5. Prescription pattern and effectiveness of antihypertensive drugs in patients with aortic dissection who underwent surgery.
- Author
-
Kung-Ming Laio, Chuan-Wei Shen, Yun-Hui Huang, Chun-Hui Lu, Hsuan-Lin Lai, and Chung-Yu Chen
- Subjects
AORTIC dissection ,DRUG efficacy ,ARACHNOID cysts ,CALCIUM antagonists ,ANGIOTENSIN-receptor blockers ,ANTIHYPERTENSIVE agents ,AORTIC aneurysms ,RENIN-angiotensin system - Abstract
Background: Surgical patients with aortic dissection often require multiple antihypertensive drugs to control blood pressure. However, the prescription pattern and effectiveness of antihypertensive drugs for these patients are unclear. We aimed to investigate the prescription pattern and effectiveness of different classes of antihypertensive drugs in surgical patients with aortic dissection. Methods: Newly diagnosed aortic dissection patients who underwent surgery, aged >20 years, from 1 January 2012 to 31 December 2017 were identified. Patients with missing data, in-hospital mortality, aortic aneurysms, or congenital connective tissue disorders, such as Marfan syndrome, were excluded. Prescription patterns of antihypertensive drugs were identified from medical records of outpatient visits within 90 days after discharge. Antihypertensive drugs were classified into four classes: 1) ß-blockers, 2) calcium channel blockers (CCBs), 3) renin-angiotensin system, and 4) other antihypertensive drugs. Patients were classified according to the number of classes of antihypertensive drugs as follows: 1) class 0, no exposure to antihypertensive drugs; 2) class 1, antihypertensive drugs of the same class; 3) class 2, antihypertensive drugs of two classes; 4) class 3, antihypertensive drugs of three classes; or 5) class 4, antihypertensive drugs of four classes. The primary composite outcomes included rehospitalization associated with aortic dissection, death due to aortic dissection, and all-cause mortality. Results: Most patients were prescribed two (28.87%) or three classes (28.01%) of antihypertensive drugs. In class 1, ß-blockers were most commonly used (8.79%), followed by CCBs (5.95%). In class 2, ß-blockers+CCB (10.66%) and CCB+RAS (5.18%) were the most common drug combinations. In class 3, ß-blockers + CCB+RAS (14.84%) was the most prescribed combination. Class 0 had a significantly higher hazard of the composite outcome (HR, 2.1; CI, 1.46-3.02; p < 0.001) and all-cause mortality (HR, 2.34; CI, 1.56-3.51; p < 0.001) than class 1. There were no significant differences in hazards for rehospitalization associated with aortic dissection among classes. Conclusion: Among operated patients with type A aortic dissection, no specific type of antihypertensive drug was associated with a better outcome, whereas among those with type B aortic dissection, the use of ß-blockers and CCBs was related to a significantly lower risk of the composite outcome. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
6. The optimum sintering condition for KSrPO 4 :Eu 3+ phosphors applied in WLEDs
- Author
-
Yu Ming Peng, Ru-Yuan Yang, Yan-Kuin Su, Hsuan Lin Lai, and Shoou-Jinn Chang
- Subjects
Photoluminescence ,Materials science ,Process Chemistry and Technology ,Mineralogy ,Sintering ,Phosphor ,02 engineering and technology ,010402 general chemistry ,021001 nanoscience & nanotechnology ,Microstructure ,01 natural sciences ,0104 chemical sciences ,Surfaces, Coatings and Films ,Electronic, Optical and Magnetic Materials ,Chemical engineering ,Phase (matter) ,Materials Chemistry ,Ceramics and Composites ,0210 nano-technology ,Luminescence ,Microwave - Abstract
This paper investigates the influence of various sintering temperatures on the microstructure and photoluminescence properties of KSr 0.99 PO 4 :Eu 0.01 3+ phosphors prepared by microwave-assisted sintering. The package properties of KSr 0.99 PO 4 :Eu 0.01 3+ phosphors combined with a n-UV InGaN chip are also investigated. To achieve maximum luminescence, the optimum sintering temperature for KSr 0.99 PO 4 :Eu 0.01 3+ phosphors prepared by microwave assisted-sintering is 1200 °C due to the pure phase and uniform and large particles (as identified by XRD and SEM). The results of the package properties showed that KSr 1−x PO 4 :xEu 3+ (x = 0.01) phosphor sintered at 1200 °C by microwave-assisted sintering could emit orange-red light via the n-UV InGaN chip.
- Published
- 2017
- Full Text
- View/download PDF
7. Effect of different alkali carbonate on the microstructure and photoluminescent properties of YInGe2O7:Eu3+ phosphors
- Author
-
Huang Yu Chen, Ru-Yuan Yang, Shoou-Jinn Chang, and Hsuan Lin Lai
- Subjects
010302 applied physics ,Materials science ,Photoluminescence ,Inorganic chemistry ,Sintering ,Phosphor ,02 engineering and technology ,021001 nanoscience & nanotechnology ,Condensed Matter Physics ,Alkali metal ,Microstructure ,01 natural sciences ,Atomic and Molecular Physics, and Optics ,Electronic, Optical and Magnetic Materials ,Ion ,0103 physical sciences ,Electrical and Electronic Engineering ,0210 nano-technology ,Luminescence ,Excitation - Abstract
For this study, different alkali carbonates (Li2CO3, Na2CO3, and K2CO3) were added to a Eu3+ activated YInGe2O7 phosphor synthesized using conventional sintering and microwave-assisted sintering. The morphology and photoluminescence properties of YInGe2O7:Eu3+ phosphors were investigated and discussed. When the alkali ions were introduced into YInGe2O7:Eu3+ phosphors, the excitation peaks of phosphors were shifted to a short wavelength because the addition of alkali ions may increase the oxygen vacancy in YInGe2O7:Eu3+ phosphors. Additionally, the best enhanced luminescent properties in YInGe2O7:Eu3+ phosphors were obtained through the addition of Li+ ion.
- Published
- 2015
- Full Text
- View/download PDF
8. Microstructure, and luminescence properties of LiBaPO4:Dy3+ phosphors with various Dy3+ concentrations prepared by microwave assisted sintering
- Author
-
Ru-Yuan Yang and Hsuan-Lin Lai
- Subjects
Materials science ,Biophysics ,Analytical chemistry ,Sintering ,Mineralogy ,Phosphor ,General Chemistry ,Condensed Matter Physics ,Microstructure ,Biochemistry ,Microwave assisted ,Atomic and Molecular Physics, and Optics ,Excited state ,Particle ,Chromaticity ,Luminescence - Abstract
LiBaPO 4 :Dy 3+ phosphors were synthesized by microwave-assisted and conventional sintering. XRD analysis confirmed the phase formation of all the LiBaPO 4 :Dy 3+ phosphors. PL results showed that the optimum concentration of Dy 3+ for LiBaPO 4 :Dy 3+ prepared by microwave-assisted sintering is 7 mol%. The phosphors were efficiently excited by the UV–vis light region from 300 to 400 nm, and exhibited blue (483 nm), yellow (576 nm) and red (671 nm) emission corresponding to 4 F 9/2 → 6 H 15/2 , 6 H 13/2 , and 6 H 11/2 transitions, respectively. The microwave-assisted sintering improves the sintering behavior and provides a more uniform particle morphology of LiBa 0.03 PO 4 :0.07Dy 3+ phosphors so as to obtain a luminescence intensity greater than that obtained by conventional sintering even at the same sintering temperature. Moreover, all the chromaticity ( x , y ) of the LiBa 0.03 PO 4 :0.07Dy 3+ phosphors are located in the white region (0.33, 0.37) even on using microwave-assisted sintering as the heat treatment did not influence the purity of LiBa 0.03 PO 4 :0.07Dy 3+ phosphors.
- Published
- 2014
- Full Text
- View/download PDF
9. Effect of the different concentrations of Eu3+ ions on the microstructure and photoluminescent properties of Zn2SiO4:xEu3+ phosphors and synthesized with TEOS solution as silicate source
- Author
-
Brigette Chiou, Ru-Yuan Yang, Cheng-Jye Chu, Yu-Ming Peng, Yan-Kuin Su, and Hsuan-Lin Lai
- Subjects
Photoluminescence ,Materials science ,Organic Chemistry ,Analytical chemistry ,Mineralogy ,chemistry.chemical_element ,Phosphor ,Microstructure ,Atomic and Molecular Physics, and Optics ,Silicate ,Electronic, Optical and Magnetic Materials ,Inorganic Chemistry ,chemistry.chemical_compound ,chemistry ,Impurity ,Particle size ,Electrical and Electronic Engineering ,Physical and Theoretical Chemistry ,Luminescence ,Europium ,Spectroscopy - Abstract
Zn 2 SiO 4 : x Eu 3+ phosphors were synthesized with different concentrations of Eu 3+ ions ( x = 0.001, 0.003, 0.005, 0.007 and 0.01) by using tetraethylorthosilicate (TEOS) solution as silicate source. The samples were sintered at 1200 °C for 2 h in air using solid-state sintering. The XRD results showed the prepared Zn 2 SiO 4 :Eu 3+ phosphors have a small impurity phase of SiO 2 when the Eu 3+ concentration is less than x = 0.005. However, the SEM results showed the prepared particles of Zn 2− x SiO 4 : x Eu 3+ phosphor have spherical shape, and fine size powder morphologies. The PL results showed the intensity of the emission spectra of Zn 2− x SiO 4 : x Eu 3+ phosphor increased first and reached a maximum value at x = 0.005, and then decrease due to concentration quenching effect. Moreover, the intensity of the emission spectra of Zn 2− x SiO 4 : x Eu 3+ ( x = 0.005) phosphor via TEOS solution as silicate source is stronger than that using SiO 2 powder as silicate sources, which may be attributed to the uniform particle size distribution. Moreover, all the chromaticity ( x , y ) of Zn 2− x SiO 4 : x Eu 3+ phosphors are located in the red region (0.63, 0.36) even if adopted TEOS solution as silicate source that would not influence the purity of Zn 2− x SiO 4 : x Eu 3+ phosphor.
- Published
- 2013
- Full Text
- View/download PDF
10. Enhanced Photoluminescent Properties and Crystalline Morphology of LiBaPO4:Tm3+ Phosphor through Microwave Sintering Method
- Author
-
Hsuan Lin Lai, Min-Hang Weng, Shoou-Jinn Chang, and Ru-Yuan Yang
- Subjects
Photoluminescence ,Materials science ,microwave ,Analytical chemistry ,Sintering ,Mineralogy ,Phosphor ,02 engineering and technology ,lcsh:Technology ,01 natural sciences ,Phase (matter) ,0103 physical sciences ,LiBaPO4 ,luminescence ,General Materials Science ,Chromaticity ,lcsh:Microscopy ,lcsh:QC120-168.85 ,010302 applied physics ,lcsh:QH201-278.5 ,lcsh:T ,phosphors ,021001 nanoscience & nanotechnology ,Grain size ,lcsh:TA1-2040 ,lcsh:Descriptive and experimental mechanics ,lcsh:Electrical engineering. Electronics. Nuclear engineering ,lcsh:Engineering (General). Civil engineering (General) ,0210 nano-technology ,Luminescence ,lcsh:TK1-9971 ,Microwave - Abstract
An investigation of the photoluminescent properties and crystalline morphology of blue emitting LiBa1−xPO4:xTm3+ phosphors with various concentrations (x = 0.005–0.030) of Tm3+ ions were synthesized by microwave sintering. For comparison, the LiBa1−xPO4:xTm3+ powders sintered at the same sintering condition but in a conventional furnace were also investigated. LiBaPO4 without second phase was formed no matter which furnace was used. More uniform grain size distributions are obtained by microwave sintering. When the concentration of Tm3+ ion was x = 0.015, the luminescence intensity reached a maximum value, and then decreased with the increases of the Tm3+ concentration due to concentration quenching effect. The microwave sintering significantly enhanced the emission intensity of LiBa1−xPO4:xTm3+ phosphors. Additionally, the d-d interaction is the key mechanism of concentration quenching for LiBaPO4:Tm3+. The chromaticity (x, y) for all LiBa1−xPO4:xTm3+ phosphors are located at (0.16, 0.05), which will be classified as a blue region.
- Published
- 2016
- Full Text
- View/download PDF
11. Energy transfer mechanisms in green emitting LiBaPO4:Tb3+phosphors
- Author
-
Hsuan Lin Lai, Ru-Yuan Yang, Shoou-Jinn Chang, and Yu Ming Peng
- Subjects
Chemistry ,Energy transfer ,Analytical chemistry ,Concentration quenching ,Phosphor ,Chromaticity ,Luminescence ,Photon upconversion ,Ion ,Solid state reaction method - Abstract
Green emitting LiBa 1-x PO4:xTb 3+ up-conversion phosphors with various concentrations (x=0.1, 0.2, 0.3, 0.4, 0.5) of Tb 3+ ions were synthesized by solid state reaction method at 1300 □ for 3 hour in air. The impure phases were appeared as Tb 3+ ion concentration was further increased (x more than 0.2). The luminescence intensity reached a maximum when the concentration of Tb3+ ion was x = 0.2, and then decreased with the increases of the Tb 3+ concentration due to concentration quenching effect. In addition, it is identified that the d-d interaction plays a major role in the mechanism of concentration quenching of LiBaPO 4 :Tb 3+ and all the chromaticity (x, y) of LiBa 1-x PO 4 :xTb 3+ phosphors are located in the green region (0.33, 0.56 ).
- Published
- 2014
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.