Search

Accurate determination of Se in tea is critical for the quality control and safety of Se supplements. In this paper, we developed a rapid and automatic method for the determination of Se in tea samples using mixed acid (VHNO3:VHClO4 = 4:1) digestion followed by ion exchange chromatographic separation coupled to high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) measurement. The radionuclide 75Se was used as a tracer to monitor the loss of Se during entire separation procedure. The application of an automatic separation system speeded up the separation procedure and shortened the entire analytical time to less than 3 h. High performance liquid chromatography measurement of the sample solution after acid digestion shows the species of Se in the digests was Se(VI). 20 mL of HNO3 (> 5 mol L−1) can effectively elute Se from the column, and ~ 95% of Se can be eluted using 20 mL of 6 mol L−1 HNO3. The decontamination factors of more than 1 × 106 were achieved for the major interfering elements (Ca, Zn and Cu) by forming polyatomic ions for mass spectrometric measurement of 82Se by HR-ICP-MS. Meanwhile most of Br can be also removed and the key interference of 81Br1H+ was significantly suppressed in the HR-ICP-MS measurement of 82Se. The average chemical yield of 75Se was 93.2 ± 0.5%, which fall within 95% confidence interval. The developed method was validated through the analysis of certified reference materials, the measured values are in a good agreement with certified values, confirming the analytical method is reliable and accurate. The method established in this work has been successfully applied for the analysis of some commercially available tea leave samples. [ABSTRACT FROM AUTHOR]

[Display omitted] • U-PSresin was synthesized to use for separation and detection of U(VI). • U-PSresin shows good irradiation and thermal stability. • U-PSresin is demonstrated a highly sensitive detection efficiency of U(VI). • U-PSresin is proved to be used for continuous measurement of U(VI). It is extremely significant to monitor the radioactive uranium during the process of nuclear energy mining and disposal because of its high levels of chemical and radiological toxicity. In this work, a novel uranium plastic scintillator resin (U-PSresin) was successfully synthesized by suspension polymerization and used to rapidly enrich and determine uranium by Liquid Scintillation Counting (LSC). The U-PSresin shows excellent irradiation stability, extremely appropriate adsorption capacity of U(VI) (9.35 mg/g), which is convenient for the accurate measurement of LSC. Meanwhile, U-PSresin has a deviation of less than 5 % in adsorption and measurement repeatability and can be utilized to accurately measure more than 1 mg of natural uranium after enrichment. For different types of spiked water samples, the measurement deviation of U-PSresin is less than 15 %. This work demonstrates that U-PSresin can selectively enrich and quantitatively measure uranium in an aqueous environment, showcasing its significant potential in nuclear emergency scenarios and environmental monitoring. [ABSTRACT FROM AUTHOR]

[Display omitted] • A novel extractant resin DtBuCH18C6@CG-71 was successfully prepared with simple and low-cost method. • DtBuCH18C6@CG-71 exhibited remarkable separation ability of Sr(II) even in high concentration HNO 3 (3–12 mol/L). • DtBuCH18C6@CG-71 possessed great acid, irradiation and thermal resistance stability. • DtBuCH18C6@CG-71 can adeptly sequesters and recovers Sr(II) from wastewater via an automated separation system. Effective removal of radioactive 90Sr is crucial for both management of spent nuclear fuel and recovery of radioactive strontium resources, while it's still a great challenge due to the presence of high acid levels and intense radiation. Herein, a novel porous resin (DtBuCH18C6@CG-71) were synthesized by introducing 4′,4″(5″)-di- tert -butyldicyclohexano-18-crown-6 onto CG-71 resin using vacuum impregnation. The DtBuCH18C6@CG-71 resin maintains superior adsorption abilities in extreme conditions, including high acid resistance (3–12 mol/L HNO 3), substantial γ-irradiation (200 kGy 60Co), and elevated temperatures (50–100 ℃). Impressively, even when exposed to a high concentration of matrix ions (59 elemental ions), the Sr(II) adsorption ratio onto DtBuCH18C6@CG-71 resin remains near 100 % even in highly acidic condition, which performance outpaces most of commercial resins. Dynamic column tests using an automated separation system further confirmed the superior ability of DtBuCH18C6@CG-71 in term of extracting Sr(II) from wastewater. Given its impressive features, cost-effectiveness, and scalability, DtBuCH18C6@CG-71 resin holds promising potential for 90Sr disposal in nuclear wastewater. [ABSTRACT FROM AUTHOR]

99Tc primarily exists high mobility in the natural aqueous environment due to its extremely high solubility and non-complexing features, which can easily cause radioactive pollution. We herein report a general strategy for constructing a novel resin (SiPAN-PEI) with multiple positive charges nitrogen, exhibiting ultrafast adsorption kinetics (< 3 min), superior adsorption capacities (463.96 mg g−1), and excellent selectivity in the presence of excess competitive anions, which exceed those of most commercial resins. Moreover, based on impressive structure stability in extreme conditions, SiPAN-PEI can still maintain superior adsorption abilities after suffering irradiation, calcination, and immersion in strong acid. In addition, the separation performance kept excellently after five loading-washing-eluting cycles and the total adsorption ratio can still reach 97 %. Outstandingly, SiPAN-PEI can remove most of ReO 4 - from simulated nuclear wastewater through a sequential injection automatic separation system and can reduce the concentration of ReO 4 - to the maximum concentration standard set by the World Health Organization (WHO) in a short time. Leveraging density functional theory calculations and other characteristics clearly elucidated adsorption mechanism of anion-exchange between Cl- and TcO 4 -/ReO 4 -. In terms of superior adsorption property, SiPAN-PEI is demonstrated to be a pretty candidate for 99Tc elimination from wastewater. [Display omitted] • A novel resin SiPAN-PEI was successfully synthesized for selective capture of 99Tc. • SiPAN-PEI exhibited excellent adsorption ability of 99Tc in harsh conditions. • Multiple positive charge nitrogen plays a critical role in capture of 99Tc. • SiPAN-PEI demonstrated efficiency capture of 99Tc in simulated wastewater. [ABSTRACT FROM AUTHOR]