Search

Abstract Background Early versions of spinal muscular atrophy (SMA) scoliosis correction surgery often involved sublaminar devices. Recently, the utilization of pedicle screws has gained much popularity. Pedicle screws are generally believed to provide additional deformity correction, but pedicle size and rotational deformity limit their application in the thoracic spine, resulting in a hybrid construct involving pedicle screws and sublaminar wire. Studies of the efficacy of hybrid instrumentation in SMA scoliosis are often limited by the scarcity of the disease itself. In this study, we aimed to compare the surgical outcomes between hybrid constructs involving pedicle screws and sublaminar wire and sublaminar wire alone in patients with SMA scoliosis. Methods We retrospectively reviewed the clinical records and radiographic assessments of patients with SMA scoliosis who underwent corrective surgery between 1993 and 2017. The radiographic assessments included deformity correction and progressive changes in the major curve angle, pelvic tilt (PT) and coronal balance (CB). The correction of deformities was observed postoperatively and at the patient’s 2-year follow-up to test the efficacy of each type of construct. Results Thirty-three patients were included in this study. There were 14 and 19 patients in the wiring and hybrid construct groups, respectively. The hybrid construct group demonstrated a higher major curve angle correction (50.5° ± 11.2° vs. 36.4° ± 8.4°, p

Background: Early versions of spinal muscular atrophy (SMA) scoliosis correction surgery often involved sublaminar devices. Recently, the utilization of pedicle screws has gained much popularity. Pedicle screws are generally believed to provide additional deformity correction, but pedicle size and rotational deformity limit their application in the thoracic spine, resulting in a hybrid construct involving pedicle screws and sublaminar wire. Studies of the efficacy of hybrid instrumentation in SMA scoliosis are often limited by the scarcity of the disease itself. In this study, we aimed to compare the surgical outcomes between hybrid constructs involving pedicle screws and sublaminar wire and sublaminar wire alone in patients with SMA scoliosis.Methods: We retrospectively reviewed the clinical records and radiographic assessments of patients with SMA scoliosis who underwent corrective surgery between 1993 and 2017. The radiographic assessments included deformity correction and progressive changes in the major curve angle, pelvic tilt (PT) and coronal balance (CB). The correction of deformities was observed postoperatively and at the patient's 2-year follow-up to test the efficacy of each type of construct.Results: Thirty-three patients were included in this study. There were 14 and 19 patients in the wiring and hybrid construct groups, respectively. The hybrid construct group demonstrated a higher major curve angle correction (50.5° ± 11.2° vs. 36.4° ± 8.4°, p < 0.001), a higher apical vertebral rotation correction (10.6° ± 3.9° vs. 4.8° ± 2.6°, p < 0.001), and a reduced progression of the major curve angle at the 2-year follow-up (5.1° ± 2.9° vs. 8.7° ± 4.8°, p < 0.001). A moderate correlation was observed between the magnitude of correction of the apical vertebral rotation angle and the major curve (r = 0.528, p = 0.002).Conclusion: This study demonstrated that hybrid instrumentation can provide a greater magnitude of correction in major curve and apical rotation as well as less major curve progression than sublaminar wire instrumentation alone in patients with SMA scoliosis. Level of evidence III. [ABSTRACT FROM AUTHOR]

The evolution of additive manufacturing (AM) technologies, biomaterial development and our increasing understanding of cell biology has created enormous potential for the development of personalized regenerative therapies. In the context of skeletal tissue engineering, physical and biological demands play key roles towards successful construct implantation and the achievement of bone, cartilage and blood vessel tissue formation. Nevertheless, meeting such physical and biological demands to mimic the complexity of human tissues and their functionality is still a significant ongoing challenge. Recent studies have demonstrated that combination of AM technologies and advanced biomaterials has great potential towards skeletal tissue engineering. This review aims to analyze how the most prominent technologies and discoveries in the field converge towards the development of advanced constructs for skeletal regeneration. Particular attention is placed on hybrid biofabrication strategies, combining bioinks for cell delivery with biomaterial inks providing physical support. Hybrid biofabrication has been the focus of recent emerging strategies, however there has been limited review and analysis of these techniques and the challenges involved. Furthermore, we have identified that there are multiple hybrid fabrication strategies, here we present a category system where each strategy is reviewed highlighting their distinct advantages, challenges and potential applications. In addition, bioinks and biomaterial inks are the main components of the hybrid biofabrication strategies, where it is recognized that such platforms still lack optimal physical and biological functionality. Thus, this review also explores the development of composite materials specifically targeting the enhancement of physical and biological functionality towards improved skeletal tissue engineering. Biofabrication strategies capable of recreating the complexity of native tissues could open new clinical possibilities towards patient-specific regenerative therapies and disease models. Several reviews target the existing additive manufacturing (AM) technologies that may be utilised for biomedical purposes. However, this work presents a unique perspective, describing how such AM technologies have been recently translated towards hybrid fabrication strategies, targeting the fabrication of constructs with converging physical and biological properties. Furthermore, we address composite bioinks and biomaterial inks that have been engineered to overcome traditional limitations, and might be applied to the hybrid fabrication strategies outlined. This work offers ample perspectives and insights into the current and future challenges for the fabrication of skeletal tissues aiming towards clinical and biomedical applications. [Display omitted] [ABSTRACT FROM AUTHOR]

Background: In patients with Marfan syndrome (MFS), surgical correction of spinal deformities with hooks and/or pedicle screws involves a higher rate of complications than in patients with adolescent idiopathic scoliosis. Therefore, sublaminar instrumentation is often a last resort option. This study wants to assess the ability of sublaminar fixation to achieve three-dimensional scoliosis correction and spine stabilization compared with hook and/or pedicle screw systems. Methods: Twenty-one MFS patients who underwent posterior spinal fusion at a highly specialized medical center in 1995–2017 were divided into two different groups retrospectively evaluated at a minimum follow-up of 2 years. Group 1 (8 patients) was composed by hooks and screws instrumentation, while Group 2 (13 patients) was composed by hook or pedicle screw system associated to sublaminar wires/bands. Radiological (correction and long-term stability) and general endpoints (mean blood loss, surgery time, and complications) were compared between the groups. Results: The degree of correction compared with the preoperative status was satisfactory with both approaches, although the difference between them was not significant. No significant differences were found for general endpoints between groups. Conclusion: Our data suggest that scoliosis correction with sublaminar fixation is not inferior to treatment with hooks and/or pedicle screws. Level of Evidence: III.

Hybrid Mita (Suzuki) method is a newly developed technique of scoliosis surgery. This concept consists of three components: rib mobilization, rod rotation maneuver and hook rotation maneuver, which does not require intra-operative CT scan with lower risk of screw malposition. The aim of this study is to evaluate the efficacies of this method for correction in scoliosis. : This is a retrospective observational study, consist of eighty-nine idiopathic scoliosis patients who underwent this method between 2009 and 2016 with minimum 2-years follow-up. The curve pattern, Cobb angle, hump height and angle, peri-operative events and complications were analyzed. The mean pre- and post-operative Cobb angle was 50.9° and 10.1°, respectively. The average correction rate was 80.5%. Hump height was reduced from 20.2 mm to 9.8 mm and hump angle reduced from 13.1° to 6.1 ° in average. The correction loss at the final follow-up was 0.3° in average. There were two local superficial infection cases, but there was no instrumentation failure such as malposition or dislodgement, or pseudarthrosis. This novel method is promising to provide excellent clinical correction to idiopathic scoliosis, which is no less than all pedicle screw constructs. The technique of the skillful utilization of hooks in spinal surgery should not perish from the stage. [ABSTRACT FROM AUTHOR]

Background: In patients with Marfan syndrome (MFS), surgical correction of spinal deformities with hooks and/or pedicle screws involves a higher rate of complications than in patients with adolescent idiopathic scoliosis. Therefore, sublaminar instrumentation is often a last resort option. This study wants to assess the ability of sublaminar fixation to achieve three-dimensional scoliosis correction and spine stabilization compared with hook and/or pedicle screw systems. Methods: Twenty-one MFS patients who underwent posterior spinal fusion at a highly specialized medical center in 1995–2017 were divided into two different groups retrospectively evaluated at a minimum follow-up of 2 years. Group 1 (8 patients) was composed by hooks and screws instrumentation, while Group 2 (13 patients) was composed by hook or pedicle screw system associated to sublaminar wires/bands. Radiological (correction and long-term stability) and general endpoints (mean blood loss, surgery time, and complications) were compared between the groups. Results: The degree of correction compared with the preoperative status was satisfactory with both approaches, although the difference between them was not significant. No significant differences were found for general endpoints between groups. Conclusion: Our data suggest that scoliosis correction with sublaminar fixation is not inferior to treatment with hooks and/or pedicle screws. Level of Evidence: III. [ABSTRACT FROM AUTHOR]

The radiographic apparent assumed that the asymptomatic adjacent segment disease ASD is common after lumbar fusion, but this does not correlate with the functional outcomes while compensatory increased motion and stresses at the adjacent level of fusion is well-known to be associated to ASD [4,5,8]. Newly developed, hybrid and flexible stabilizations are allocated to substitute for mostly the superior level of the fusion in an attempt to reduce the number of fusion levels and likelihood of degeneration process at the adjacent levels during the fusion with pedicle screws. Nevertheless, its biomechanical efficiencies still remain unknown and the complications associated with failure of constructs such screw loosening and toggling should be elucidated [4]. In the current study, a finite element (FE) study was performed using a validated L2/S1 model subjected to a moment of 10 Nm and follower load of 100 N to assess the biomedical behavior of hybrid constructs based on dynamic topping off, semi-rigid fusion using polymeric and composite materials. [ABSTRACT FROM AUTHOR]

Synchrotron radiation inline phase-contrast imaging combined with computed tomography (SR-inline-PCI-CT) offers great potential for non-invasive characterization and three-dimensional visualization of fine features in weakly absorbing materials and tissues. For cartilage tissue engineering, the biomaterials and any associated cartilage extracellular matrix (ECM) that is secreted over time are difficult to image using conventional absorption-based imaging techniques. For example, three-dimensional printed polycaprolactone (PCL)/ alginate/cell hybrid constructs have low, but different, refractive indices and thicknesses. This paper presents a study on the optimization and utilization of inline-PCI-CT for visualizing the components of three-dimensional printed PCL/alginate/cell hybrid constructs for cartilage tissue engineering. First, histological analysis using Alcian blue staining and immunofluorescent staining assessed the secretion of sulfated glycosaminoglycan (GAGs) and collagen type II (Col2) in the cell-laden hybrid constructs over time. Second, optimization of inline PCI-CT was performed by investigating three sample-to-detector distances (SDD): 0.25, 1 and 3 m. Then, the optimal SDD was utilized to visualize structural changes in the constructs over a 42-day culture period. The results showed that there was progressive secretion of cartilage-specific ECM by ATDC5 cells in the hybrid constructs over time. An SDD of 3 m provided edgeenhancement fringes that enabled simultaneous visualization of all components of hybrid constructs in aqueous solution. Structural changes that might reflect formation of ECM also were evident in SR-inline-PCI-CT images. Summarily, SR-inline-PCI-CT images captured at the optimized SDD enables visualization of the different components in hybrid cartilage constructs over a 42-day culture period. [ABSTRACT FROM AUTHOR]

Background Context Favorable clinical outcomes of surgical treatment with Cotrel-Dubousset instrumentation (CDI) or instrumentations that follow the principles of CDI, for adolescent idiopathic scoliosis (AIS) have been reported. However, there are few studies concerning the results with rods of different sizes. Purpose: To find out whether the rod size affects the surgical results for AIS. Study design: A retrospective cohort study based on the same spinal system with different sizes of rod. Patient sample: A consecutive series of 93 patients, who underwent posterior correction with posterior instrumentation and fusion for AIS, were included and retrospectively analyzed. Outcome measures: Postoperative radiologic outcomes were evaluated using coronal curves, percentage of curve correction, and coronal global balance. Methods Ninety-three patients treated during the period January 2000 to December 2008 were included in this study; 48 patients were treated with the Cotrel-Dubousset Horizon (CDH) M10 system with a 6.35-mm rod from January 2000 through December 2004, and a CDH M8 was used with a 5.5-mm rod in another 45 patients from January 2005 through December 2008. The Cobb angle, Risser grade, coronal curves, flexibility of curve, percentage of curve correction, coronal global balance, operative time, and estimated blood loss were measured and analyzed. The same parameters were used when the patient was followed at the OPD. All of the patients underwent regular follow-up for at least 2 years. Results No statistical significance was observed in the demographic data, including age, sex, BMI, and Risser grade, between these 2 groups. The overall average percentage of correction was 60.0%±12.7%: 60.7%±12.5% for the CDH M10 group, and 59%±13.1% for the CDH M8 group. At the final follow-up, the overall average loss of correction was 4.8±3.9° for the CDH M10 group, and 4.3±4.0° for the CDH M8 group. The average percentage of correction at the final follow-up was 50.9%±15.1% for the CDH M10 group, and 51.1%±16.1% for the M8 group. No statistical significance could be observed in the radiologic parameters between these 2 groups. Conclusion The radiologic results for the 5.5-mm rod and the 6.35-mm rod were comparable in terms of correction, loss of correction, and coronal global balance. [ABSTRACT FROM AUTHOR]

Purpose: Computed tomography can be used for three-dimensional (3D) evaluation of adolescent idiopathic scoliosis (AIS) patients, but at the expense of high radiation exposure, and with the limitation of being performed in the supine position. These drawbacks can now be avoided with low-dose stereoradiography, even in routine clinical use. The purpose of this study was to determine the 3D postoperative correction of AIS patients treated by posteromedial translation. Methods: Forty-nine consecutive patients operated for AIS (Lenke 1–4) using posteromedial translation were included. Corrections were evaluated preoperatively, postoperatively and after at least 2 years using the EOS imaging system. 3D angles were measured in the plane of maximum deformity. Results: Mean number of levels fused and operative time were 13.5 ± 1 and 215 ± 25 min, respectively. Main thoracic, proximal thoracic, and lumbar curves corrections averaged 64.4 ± 18, 31 ± 10 and 69 ± 20 %, respectively. Mean T4–T12 kyphosis increased 18.8° ± 9° in the subgroup of hypokyphotic patients. Mean apical vertebral rotation reduction was 48.3 ± 20 %. Trunk height gain averaged 27.8 ± 14 mm. There was no pseudarthrosis or significant loss of correction in any plane during follow-up. Two patients (4 %) developed asymptomatic proximal junctional kyphosis, despite having normal thoracic kyphosis. Their sagittal balance was shifted posteriorly by 36 and 47 mm, respectively, by the operation, but revision surgery was not performed. Conclusions: Low-dose stereoradiography provided 3D reconstructions of the fused and unfused spine in routine clinical use. Postoperative 3D analysis showed that posteromedial translation enhanced sagittal balance correction, without sacrificing frontal or axial correction of the deformity. [ABSTRACT FROM AUTHOR]

Purpose: To analyze postoperative changes in the cervical sagittal alignment (CSA) of patients with AIS treated by posteromedial translation. Methods: 49 patients with thoracic AIS underwent posterior arthrodesis with hybrid constructs, combining lumbar pedicle screws and thoracic universal clamps. Posteromedial translation was the main correction technique used. 3D radiological parameters were measured from low-dose biplanar radiographs. CSA was assessed using the C2C6 angle, and the central hip vertical axis (CHVA) was used as a reference axis to evaluate patients' balance. Results: Preoperatively, 58 % of patients had thoracic hypokyphosis, and 79 % had a kyphotic CSA. Significant correlation was found ( r = 0.45, P = 0.01) between thoracic hypokyphosis and cervical kyphosis. Increase in T4-T12 thoracic kyphosis (average 14.5° ± 10°) was associated with significant decrease in cervical kyphosis in the early postoperative period. The CSA further improved spontaneously during follow-up by 7.6° ( P < 0.0001). Significant positive correlation ( r = 0.32, P = 0.03) was found between thoracic and cervical improvements. At latest follow-up, 94 % of the patients were normokyphotic and 67 % had a CSA in the physiological range. Sagittal balance of the thoracolumbar spine was not significantly modified postoperatively. However, the procedure significantly changed the position of C2 in regard to the CHVA (C2-CHVA), which reflects headposition ( P = 0.012). At last follow-up, the patients sagittal imbalance was not significantly different from the preoperative imbalance ( P = 0.34). Conclusions: Thoracic hypokyphosis and cervical hypolordosis, observed in AIS, can be improved postoperatively, when the posteromedial translation technique is used for correction. The cervical spine remains adaptable in most patients, but the proportion of patients with physiological cervical lordosis at final follow-up remained low (24.5 %). [ABSTRACT FROM AUTHOR]

Copyright of IRBM is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The article presents a study on the self assessment of appearance by patients who underwent posterior spinal fusion with instrumentation for adolescent idiopathic scoliosis (AIS). There were not significant preoperative differences found in 93 patients in the all pedicle screw cohort and 61 in the hybrid cohort. A better assessment of self-appearance was determined for all pedicle screw constructs.

The article presents a study which compares the efficiency of universal clamps (UCs) and hook in the surgical thoracic correction of adolescent idiopathic scoliosis (AIS). The efficiency of the two methods were assessed among 75 patients who undergone thoracic hook from 2001 to 2003, and 75 patients who undergone thoracic UCs with posteromedial translation. It shows that UC is more efficient, as exemplified by its 55% efficiency against the 2% efficiency of hooks among normokyphotic patients.

Hybrid constructs represent substantial progress in tissue engineering (TE) towards producing implants of a clinically relevant size that recapitulate the structure and multicellular complexity of the native tissue. They are created by interlacing printed scaffolds, sacrificial materials, and cell-laden hydrogels. A suitable biomaterial is a polycaprolactone (PCL); however, due to the higher viscosity of this biopolymer, three-dimensional (3D) printing of PCL is slow, so reducing PCL print times remains a challenge. We investigated parameters, such as nozzle shape and size, carriage speed, and print temperature, to find a tradeoff that speeds up the creation of hybrid constructs of controlled porosity. We performed experiments with conical, cylindrical, and cylindrical shortened nozzles and numerical simulations to infer a more comprehensive understanding of PCL flow rate. We found that conical nozzles are advised as they exhibited the highest shear rate, which increased the flow rate. When working at a low carriage speed, conical nozzles of a small diameter tended to form-flatten filaments and became highly inefficient. However, raising the carriage speed revealed shortcomings because passing specific values created filaments with a heterogeneous diameter. Small nozzles produced scaffolds with thin strands but at long building times. Using large nozzles and a high carriage speed is recommended. Overall, we demonstrated that hybrid constructs with a clinically relevant size could be much more feasible to print when reaching a tradeoff between temperature, nozzle diameter, and speed. [ABSTRACT FROM AUTHOR]