Search

This paper describes the operational design and execution of the MAVEN aerobraking phase at Mars from a Navigation Team perspective. MAVEN was designed to perform atmospheric science in a ~150x6200 km altitude elliptical orbit. After the primary science mission, it was decided that MAVEN should circularize its orbit, as much as feasible from a spacecraft and mission standpoint, to better support relay operations with the landers. As a result, MAVEN performed aerobraking in the first half of 2019 to reduce its orbit to ~150x4500 km altitude. Although MAVEN did not decrease its altitude as low as previous aerobraking missions, it had several unique challenges. Science observations continued to be taken during aerobraking, requiring dramatically better Navigation accuracies than typical for such phases. Furthermore, continuous DSN coverage with 2-way Doppler data was not available. So, with 40% less Doppler data, Navigation had to meet prediction accuracies which were an order of magnitude smaller than in previous aerobraking operations. Spacecraft accelerometer data was included in Navigation analyses in order to meet these requirements.

Dragonfly is one of two mission concepts selected in December 2017 to advance into Phase A of NASA’s New Frontiers competition. Dragonfly would address the Ocean Worlds mission theme by investigating Titan’s habitability and prebiotic chemistry and searching for evidence of chemical biosignatures of past (or extant) life. A rotorcraft lander, Dragonfly would capitalize on Titan’s dense atmosphere to enable mobility and sample materials from a variety of geologic settings. This paper describes Dragonfly’s baseline mission design giving a complete picture of the inherent tradespace and outlines the design process from launch to atmospheric entry.

This paper reports on the orbit determination performance for the final 1.5 years of the Cassini Solstice mission, including the mission’s Grand Finale. During this period, Cassini encountered its final eleven targeted flybys of Titan (T116-T126) and executed its last 62 orbits of Saturn. In these final months, the spacecraft’s inclination was gradually raised from near equatorial to near 63 degrees, critical inclination, to prevent the line of apsides from rotating out of Titan’s orbital plane. Critical inclination enables continued Titan flybys, the last of which places Cassini on an impact trajectory with Saturn, thereby satisfying planetary protection requirements. In this reporting period, the orbit period moved from 16 days to nearly 32 and, for the final 6 months, it was brought down to less than 7 days. By design, the spacecraft entered the Saturn atmosphere on its final orbit and vaporized on September 15, 2017. We also report on the particular challenges associated with a stellar occultation, a flyby of Saturn’s rocks, and the last revolutions of the mission’s Grand Finale.

UNKNOWN

UNKNOWN

UNKNOWN

Earth and spacecraft-based observations of the Jovian moon Europa have identified it as the most plausible habitat for extraterrestrial life in our solar system. Recently, NASA has formed a Europa Mission Concept to potentially explore this icy world with a sophisticated instrument suite operating from a spacecraft in orbit about Jupiter. Candidate trajectories have been designed that would use the Jovian moons to repeatedly bring the spacecraft near Europa, providing multiple observation opportunities over the mission duration. This paper describes navigation analyses associated with these trajectories that are being assessed for their operational feasibility. The analysis includes determination of the ΔV requirements for the mission concept and notional spacecraft ephemeris knowledge capability.

This paper reviews the orbit determination performance for the last five years of the Cassini Mission Solstice Tour. During this period of time, Cassini had more than 30 satellite encounters, including Titan, Rhea, and Dione. We report on the navigational flyby accuracy, comparing post-flyby reconstructions and encounter predictions, and discuss the performance improvement and challenges over the years. Finally, we give an overview of the "Grand Finale" end of mission planned for 2017.The Cassini mission has been in orbit in the Saturnian system for more than 11 years, and hasreturned a wealth of discoveries and operational knowledge in the outer Solar System. In this paper, we reported on the last three years of navigation operations focusing on orbit determinationand encounter performance. Modeling and strategy changes over the past years now allow us tonavigate bodies at 100s of meters in accuracy, and consider a miss larger than 1 km an outlier.The Cassini Grand Finale will be spectacular - do not miss it!

A new Jovian satellite tour is proposed by NASA, which would include numerous flybys of the moon Europa, and would explore its potential habitability by characterizing the existence of any water within and beneath Europa's ice shell. This paper describes the results of a covariance study that was undertaken on a sample tour to assess the navigational challenges and capabilities of such a mission from an orbit determination (OD) point of view, and to help establish a delta V budget for the maneuvers needed to keep the spacecraft on the reference trajectory. Additional parametric variations from the baseline case were also investigated. The success of the Europa Clipper mission will depend on the science measurements that it will enable. Meeting the requirements of the instruments onboard the spacecraft is an integral part of this analysis.

Jupiter's moon Europa is a prime candidate in the search for present-day habitable environments outside of the Earth. A number of missions have provided increasingly detailed images of the complex surface of Europa, including the Galileo mission, which also carried instruments that allowed for a limited investigation of the environment of Europa. A new mission to Europa is needed to pursue these exciting discoveries using close-up observations with modern instrumentation designed to address the habitability of Europa. In all likelihood the most cost effective way of doing this would be with a spacecraft carrying a comprehensive suite of instruments and performing multiple flybys of Europa. A number of notional trajectory designs have been investigated, utilizing gravity assists from other Galilean moons to decrease the period of the orbit and shape it in order to provide a globally distributed coverage of different regions of Europa. Navigation analyses are being performed on these candidate trajectories to assess the total Delta V that would be needed to complete the mission, to study how accurately the flybys could be executed, and to determine which assumptions most significantly affect the performance of the navigation system.

The Cassini spacecraft has been in orbit around Saturn for just over 7 years, with a planned 7-year extension, called the Solstice Mission, which started on September 27, 2010. The Solstice Mission includes 205 maneuvers and 70 flybys which consist of the moons Titan, Enceladus, Dione, and Rhea. This mission is designed to use all available propellant with a statistical margin averaging 0.6 m/s per encounter, and the work done to prove and ensure the viability of this margin is highlighted in this paper.

Telemetry data are used to improve navigation of the Saturn orbiting Cassini spacecraft. Thrust induced delta V's are computed on-board the spacecraft, recorded in telemetry, and downlinked to Earth. This paper discusses how and why the Cassini Navigation team utilizes spacecraft delta V telemetry. Operational changes making this information attractive to the Navigation Team will be briefly discussed, as will spacecraft hardware and software algorithms responsible for the on-board computation. An analysis of past delta V telemetry, providing calibrations and accuracies that can be applied to the estimation of future delta V activity, is described.

This paper describes the optical navigation image (opnav) planning for the Cassini extended mission, which includes nine low-altitude flybys of the icy satellites including seven of Enceladus, one of Dione and one of Rhea.

Dynamic modeling of the spacecraft and Saturn system, tracking data, including radio-metric and optical navigation data, and measurement modeling associated with the final trajectory analysis are described. Navigation predictions produced during the operational phase are compared with the final trajectory in order to gain insight into navigation performance and maneuver execution errors. Special attention is given to refinement of the dynamical environment of Saturn, particularly Titan, during the first two orbits.

Of the eight Saturnian icy satellites. all but Mimas and Tethys had low altitude targeted flybys during the 4-year primary Cassini spacecraft tour. In November 2004, the existence of a potential low-altitude Tethys flyby was discovered; this low-altitude flyby, added to the nominal tour in March 2005, corresponded to a 1500 km non-targeted periapsis altitude on September 24, 2005 with an associated (delta)v cost of approximately 8 mis. This memo details the methods used to determine the Rev-15 non-targeted Tethys flyby altitude, driven by navigational requirements and operational constraints, in addition to several trajectory modifications implemented to reduce total (delta)v costs, and in some cases. render simultaneous increases in scientific return.

After nearly seven years of interplanetary cruise and four planetary gravity assists, the Cassini spacecraft was successfully captured into orbit around Saturn on 1 July 2004.

During Cassini's third orbit around Saturn, the Huygens Probe was successfully released on a trajectory that resulted in the probe entering Titan's atmosphere on January 14, 2005, making it both the most distant spacecraft landing and the first spacecraft to successfully land on the moon of another planet. This paper documents the reconstruction of both the orbiter and probe trajectoriespanning the Titan-B and Titan-C encounters.

This paper describes Cassini orbit determination results from the first targeted flyby of Titan.

The Cassini-Huygens spacecraft was launched on October 15, 1997 as a joint NASA/ESA mission to explore Saturn. After a 7 year cruise the spacecraft will enter orbit around Saturn on 1 July 2004 for a 4 year investigation of the Saturnian system. The Cassini Navigation Team is responsible for designing the reference trajectory and conducting operations to realize this design. This paper describes the strategy for achieving project requirements, the characteristics of the Cassini navigation challenge, and the underlying assumptions.

This paper describes the strategy for achieving project requirements, the characteristics of the Cassini navigation challenge, and the underlying assumptions.

UNKNOWN

The Clementine mission is designed to test Strategic Defense Initiative Organization (SDIO) technology, the Brilliant Pebbles and Brilliant Eyes sensors, by mapping the moon surface and flying by the asteroid Geographos. The capability of two of the instruments available on board the spacecraft, the lidar (laser radar) and the UV/Visible camera is used in the covariance analysis to obtain the spacecraft delivery uncertainties at the asteroid. These uncertainties are due primarily to asteroid ephemeris uncertainties. On board optical navigation reduces the uncertainty in the knowledge of the spacecraft position in the direction perpendicular to the incoming asymptote to a one-sigma value of under 1 km, at the closest approach distance of 100 km. The uncertainty in the knowledge of the encounter time is about 0.1 seconds for a flyby velocity of 10.85 km/s. The magnitude of these uncertainties is due largely to Center Finding Errors (CFE). These systematic errors represent the accuracy expected in locating the center of the asteroid in the optical navigation images, in the absence of a topographic model for the asteroid. The direction of the incoming asymptote cannot be estimated accurately until minutes before the asteroid flyby, and correcting for it would require autonomous navigation. Orbit determination errors dominate over maneuver execution errors, and the final delivery accuracy attained is basically the orbit determination uncertainty before the final maneuver.

The Comet Rendezvous Asteroid Flyby (CRAF) mission has the primary goal of determining the composition and physical characteristics of a comet. To achieve this goal, a spacecraft will rendezvous with Comet Kopff and spend 2.5 years near the comet to study it with a variety of instruments. A penetrator will also be released by the spacecraft and propel itself into the nucleus of the comet for direct measurements. This paper presents a typical scenario for orbiting the comet, which provides for meeting all major scientific objectives.

The design of the trajectory for the proposed Comet Rendezvous Asteroid Flyby (CRAF) mission to study comet coma and tail development is examined. A two part trajectory is planned for the CRAF mission to study comet Kopff. It is proposed that, during the 213 day perihelion phase of the trajectory, CRAF should perform multiple petallike flybys at 50-5000 km from the comet's nucleus. Nine days after the perihelion, the spacecraft would transition into the comet tail in the antisun direction to a maximum distance of 50,000 km. The objectives of these two phases of exploration are discussed.

Design options for tethered systems which can produce a variable gravity living environment in space are discussed. Parameters of rotating systems are reviewed, and early studies of rotating systems are recalled. Artificial gravity configurations are shown and their individual advantages and disadvantages are examined.

Potential uses of tethers in the fields of science, transportation, electrodynamics, and space exploration are discussed. Special attention is given to the use of tethers for scientific and planetary application, with descriptions of the type of measurements to be performed in a given science field or a planetary body and the particular method of tether use. Experiments proposed regarding the use of tethers will address some of the pending issues regarding the use of tethers, such as the tether deployment and control laws, the recoil, electrodynamic effects, the strength and survivability of tethers in the lower atmosphere, the stability of a tethered platform, and the propulsion through momentum exchange.