Search

The interplay of nontrivial topology and superconductivity in condensed matter physics gives rise to exotic phenomena. However, materials are extremely rare where it is possible to explore the full details of the superconducting pairing. Here, we investigate the momentum dependence of the superconducting gap distribution in a novel Dirac material PdTe. Using high resolution, low temperature photoemission spectroscopy, we establish it as a spin-orbit coupled Dirac semimetal with the topological Fermi arc crossing the Fermi level on the (010) surface. This spin-textured surface state exhibits a fully gapped superconducting Cooper pairing structure below Tc~4.5K. Moreover, we find a node in the bulk near the Brillouin zone boundary, away from the topological Fermi arc.These observations not only demonstrate the band resolved electronic correlation between topological Fermi arc states and the way it induces Cooper pairing in PdTe, but also provide a rare case where surface and bulk states host a coexistence of nodeless and nodal gap structures enforced by spin-orbit coupling., Comment: accepted by PRL

Occupancy of different structural positions in a crystal lattice often seems to play a key role in material prop-erties. Several experimental techniques have been developed to uncover this issue, all of them being mostly bulk sensitive. However, many materials including topological insulators (TIs), which are among the most intriguing modern materials, are intended to be used in devices as thin films, for which the sublattice occupancy may differ from the bulk. One of the possible approaches to occupancy analysis is X-ray Photoelectron Diffraction (XPD), a structural method in surface science with chemical sensitivity. We applied this method in a case study of Sb2(Te1-xSex)3 mixed crystals, which belong to prototypical TIs. We used high-angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) as a reference method to verify our analysis. We revealed that the XPD data for vacuum cleaved bulk crystals are in excellent agreement with the reference ones. Also, we demonstrate that the anion occupancy near a naturally formed surface can be rather different from that of the bulk. The present results are relevant for a wide range of compositions where the system remains a topological phase, as we ultimately show by probing the transiently occupied topological surface state above the Fermi level by ultrafast photoemission.

Magnetic topological insulators (MTIs) have recently become a subject of poignant interest; among them, Z

Topological phases of matter offer exciting possibilities to realize lossless charge and spin information transport on ultrafast time scales. However, this requires detailed knowledge of their nonequilibrium properties. Here, we employ time-, spin- and angle-resolved photoemission to investigate the ultrafast response of the Sb(111) spin-polarized surface state to femtosecond-laser excitation. The surface state exhibits a giant mass enhancement which is observed as a kink structure in its energy-momentum dispersion above the Fermi level. The kink structure, originating from the direct coupling of the surface state to the bulk continuum, is characterized by an abrupt change in the group velocity by ~70%, in agreement with our GW-based band structure calculations. Our observation of this connectivity in the transiently occupied band structure enables the unambiguous experimental verification of the topological nature of the surface state. The influence of bulk-surface coupling is further confirmed by our measurements of the electron dynamics, which show that bulk and surface states behave as a single thermalizing electronic population with distinct contributions from low-k electron-electron and high-k electron-phonon scatterings. These findings are important for future applications of topological semimetals and their excitations in ultrafast spintronics. Understanding the coupling between spin-polarised topological surface states and the bulk provides insight into ultrafast spin dynamics. Here, this coupling is shown to be accompanied by a large mass enhancement in the Sb(111) surface electronic structure, leading to unusual dynamics.

Finding stimuli capable of driving an imbalance of spin-polarised electrons within a solid is the central challenge in the development of spintronic devices. However, without the aid of magnetism, routes towards this goal are highly constrained with only a few suitable pairings of compounds and driving mechanisms found to date. Here, through spin- and angle-resolved photoemission along with density functional theory, we establish how the $p$-derived bulk valence bands of semiconducting 1T-HfSe$_2$ possess a local, ground-state spin texture spatially confined within each Se-sublayer due to strong sublayer-localised electric dipoles orientated along the $c$-axis. This hidden spin-polarisation manifests in a `coupled spin-orbital texture' with in-equivalent contributions from the constituent $p$-orbitals. While the overall spin-orbital texture for each Se sublayer is in strict adherence to time-reversal symmetry (TRS), spin-orbital mixing terms with net polarisations at time-reversal invariant momenta are locally maintained. These apparent TRS-breaking contributions dominate, and can be selectively tuned between with a choice of linear light polarisation, facilitating the observation of pronounced spin-polarisations at the Brillouin zone centre for all $k_z$. We discuss the implications for the generation of spin-polarised populations from 1T-structured transition metal dichalcogenides using a fixed energy, linearly polarised light source., Comment: 11 pages, 6 figures

A magnetic field modifies optical properties and provides valley splitting in a molybdenum disulfide (MoS

The Fermi arcs are signatures of exotic states in solids because they defy conventional concept of Fermi surfaces as closed contours in momentum space. Fermi arcs were first discovered in cuprates, and caused by the pseudogap. Weyl semimetals provided another way to generate Fermi arcs by breaking either the time reversal symmetry (TRS) or inversion symmetry of a 3D Dirac semimetal, which can result in a Weyl semimetal with pairs of Weyl nodes that have opposite chirality. The bulk-boundary correspondence associated with the Chern number leads to the emergence of Fermi arcs on the boundary. Here, we present experimental evidence that pairs of magnetically split hole- and electron-like Fermi arcs emerge below the Neel temperature, in the antiferromagnetic (AFM) state of cubic NdBi due to a novel band splitting effect. Whereas TRS is broken by the AFM order, both inversion and nonsymmorphic TRS are preserved in the bulk, precluding the possibility of a Weyl semimetal. The observed magnetic splitting is highly unusual, as it creates bands of opposing curvature, that changes with temperature and follows the antiferromagnetic order parameter. This is completely different from previously reported cases of magnetic splittings such as traditional Zeeman and Rashba, where the curvature of the bands is preserved. Therefore, our finding represents a new Fermionic state created by new type of magnetic band splitting in the presence of a long-range AFM order that are not readily explained by existing theoretical ideas., 16 pages, 4 figures main text and 20 pages, 12 figures supplement

The formation of large polarons has been proposed as reason for the high defect tolerance, low mobility, low charge carrier trapping and low nonradiative recombination rates of lead halide perovskites. Recently, direct evidence for large-polaron formation has been reported from a 50% effective mass enhancement in angle-resolved photoemission of CsPbBr3 over theory for the orthorhombic structure. We present in-depth band dispersion measurements of CsPbBr3 and GW calculations which lead to almost identical effective masses at the valence band maximum of 0.203+/-0.016 m0 in experiment and 0.226 m0 in orthorhombic theory. We argue that the effective mass can be explained solely on the basis of electron-electron correlation and large-polaron formation cannot be concluded from photoemission data., Comment: Version 2 contains more precise theoretical values and supplemental material

Ferromagnetic topological insulators exhibit the quantum anomalous Hall effect, which is potentially useful for high-precision metrology, edge channel spintronics, and topological qubits. The stable 2+ state of Mn enables intrinsic magnetic topological insulators. MnBi

Fermi surfaces, three-dimensional (3D) abstract interfaces that define the occupied energies of electrons in a solid, are important for characterizing and predicting the thermal, electrical, magnetic, and optical properties of crystalline metals and semiconductors [1]. Angle-resolved photoemission spectroscopy (ARPES) is the only technique directly probing the Fermi surface by measuring the Fermi momenta ( kF ) from energy- and angular distribution of photoelectrons dislodged by monochromatic light [2]. Existing electron analyzers are able to determine a number of kF -vectors simultaneously, but current technical limitations prohibit a direct high-resolution 3D Fermi surface mapping. As a result, no such datasets exist, strongly limiting our knowledge about the Fermi surfaces and restricting a detailed comparison with the widely available nowadays calculated 3D Fermi surfaces. Here we show that using a simpler instrumentation, based on the Fourier electron optics combined with a retardation field of the detector, it is possible to perform 3D-mapping within a very short time interval and with very high resolution. We present the first detailed experimental 3D Fermi surface recorded in the full Brillouin zone along the kz-direction as well as other experimental results featuring multiple advantages of our technique. In combination with various light sources, including synchrotron radiation, our methodology and instrumentation offer new opportunities for high-resolution ARPES in the physical and life sciences.

V-doped (Bi,Sb)$_2$Te$_3$ has a ten times higher magnetic coercivity than its Cr-doped counterpart and therefore is believed to be a superior system for the quantum anomalous Hall effect (QAHE). The QAHE requires the opening of a magnetic band gap at the Dirac point. We do not find this gap by angle-resolved photoelectron spectroscopy down to 1 K. By x-ray magnetic circular dichroism (XMCD) we directly probe the magnetism at the V site and in zerofield. Hysteresis curves of the XMCD signal show a strong dependence of the coercivity on the ramping velocity of the magnetic field. The XMCD signal decays on a time scale of minutes which we conclude contributes to the absence of a detectable magnetic gap at the Dirac point., 12 pages, 3 figures

Ferromagnetic topological insulators exhibit the quantum anomalous Hall effect, which is potentially useful for high-precision metrology, edge channel spintronics, and topological qubits. The stable 2+ state of Mn enables intrinsic magnetic topological insulators. MnBi2Te4 is, however, antiferromagnetic with 25 K Néel temperature and is strongly n-doped. In this work, p-type MnSb2Te4, previously considered topologically trivial, is shown to be a ferromagnetic topological insulator for a few percent Mn excess. i) Ferromagnetic hysteresis with record Curie temperature of 45–50 K, ii) out-of-plane magnetic anisotropy, iii) a 2D Dirac cone with the Dirac point close to the Fermi level, iv) out-of-plane spin polarization as revealed by photoelectron spectroscopy, and v) a magnetically induced bandgap closing at the Curie temperature, demonstrated by scanning tunneling spectroscopy (STS), are shown. Moreover, a critical exponent of the magnetization β ≈ 1 is found, indicating the vicinity of a quantum critical point. Ab initio calculations reveal that Mn–Sb site exchange provides the ferromagnetic interlayer coupling and the slight excess of Mn nearly doubles the Curie temperature. Remaining deviations from the ferromagnetic order open the inverted bulk bandgap and render MnSb2Te4 a robust topological insulator and new benchmark for magnetic topological insulators., The authors thank Ondrej Man for help with lamella preparation for STEM and gratefully acknowledge financial support from the Austrian Science Funds (FWF, I4493-N: P30960-N27), the Impuls- und Vernetzungsfonds der Helmholtz-Gemeinschaft (Grant No. HRSF-0067, Helmholtz-Russia Joint Research Group), the CzechNanoLab project LM2018110 funded by MEYS CR, the CEITEC Nano Research Infrastructure, the Swedish Research Council (Project No. 821-2012-5144), the Swedish Foundation for Strategic Research (Project No. RIF14-0053), the Spanish Ministerio de Ciencia e Innovación (Project No. PID2019-103910GB-I00), Tomsk State University (Project No. 8.1.01.2018), and Saint Petersburg State University (Project No. 73028629). The work was also funded by the Deutsche Forschungsgemeinschaft within SPP1666 Topological Insulators and Germany's Excellence Strategy—Cluster of Excellence Matter and Light for Quantum Computing (ML4Q) EXC 2004/1 — 390534769, and the Graphene Flagship Core 3. G.Bihlmayer gratefully acknowledges computing resources on the supercomputer JURECA at the Jülich Supercomputing Centre., Open access funding enabled and organized by Projekt DEAL.

Proximity to heavy sp-elements is considered promising for reaching a band gap in graphene that could host quantum spin Hall states. The recent report of an induced spin-orbit gap of 0.2 eV in Pb-intercalated graphene detectable by spin-resolved photoemission has spurred renewed interest in such systems (Klimovskikh et al 2017 ACS Nano 11, 368). In the case of Bi intercalation an even larger band gap of 0.4 eV has been observed but was assigned to the influence of a dislocation network (Warmuth et al 2016 Phys. Rev. B 93, 165 437). Here, we study Bi intercalation under graphene on Ir(111) and report a nearly ideal graphene dispersion without band replicas and no indication of hybridization with the substrate. The band gap is small (0.19 eV) and can be tuned by ±25 meV through the Bi coverage. The Bi atomic density is higher than in the recent report. By spin-resolved photoemission we exclude induced spin-orbit interaction as origin of the gap. Quantitative agreement of a photoemission intensity analysis with the measured band gap suggests sublattice symmetry breaking as one of the possible band gap opening mechanisms. We test several Bi structures by density functional theory. Our results indicate the possibility that Bi intercalates in the phase of bismuthene forming a graphene-bismuthene van der Waals heterostructure.

Three-dimensional topological insulators are exotic materials with unique properties. Tetradymite type binary chalcogenides of bismuth and antimony, as well as their mixed crystals, belong to prototypical TIs. Potential device applications of these materials require in-depth knowledge of their stability in the ambient atmosphere and other media maintained during their processing. Here we investigated the reactivity of mixed crystals with anion substitution, Bi2(Se1-xTex)3 and Sb2(Se1-xTex)3, towards molecular oxygen using both in situ and ex situ X-ray photoelectron spectroscopy. The results indicate that, in contrast to cation substitution, partial substitution of tellurium by selenium atoms leads to anomalously high surface reactivity, which even exceeds that of the most reactive binary constituent. We attribute this effect to anion ordering that essentially modifies the bond geometry, especially the respective bond angles as modeled by DFT.

A large Rashba effect is essential for future applications in spintronics. Particularly attractive is understanding and controlling nonequilibrium properties of ferroelectric Rashba semiconductors. Here, time- and angle-resolved photoemission is utilized to access the ultrafast dynamics of bulk and surface transient Rashba states after femtosecond optical excitation of GeTe. A complex thermalization pathway is observed, wherein three different timescales can be clearly distinguished: intraband thermalization, interband equilibration, and electronic cooling. These dynamics exhibit an unconventional temperature dependence: while the cooling phase speeds up with increasing sample temperature, the opposite happens for interband thermalization. It is demonstrated how, due to the Rashba effect, an interdependence of these timescales on the relative strength of both electron-electron and electron-phonon interactions is responsible for the counterintuitive temperature dependence, with spin-selection constrained interband electron-electron scatterings found both to dominate dynamics away from the Fermi level, and to weaken with increasing temperature. These findings are supported by theoretical calculations within the Boltzmann approach explicitly showing the opposite behavior of all relevant electron-electron and electron-phonon scattering channels with temperature, thus confirming the microscopic mechanism of the experimental findings. The present results are important for future applications of ferroelectric Rashba semiconductors and their excitations in ultrafast spintronics. Nanyang Technological University Published version J.S.-B. acknowledges financial support from the Impuls- und Vernetzungsfonds der Helmholtz-Gemeinschaft under grant No. HRSF-0067. I.W. and M.B. acknowledge financial support from the Nanyang Technological University, NAP-SUG. G.S. acknowledges financial support by the Austrian Science Fund (FWF), Projects No. P30960-N27 and I 4493-N. Open access funding enabled and organized by Projekt DEAL.

For hybrid organic-inorganic as well as all-inorganic lead halide perovskites a Rashba effect has been invoked to explain the high efficiency in energy conversion by prohibiting direct recombination. Both a bulk and surface Rashba effect have been predicted. In the valence band of methylammonium (MA) lead bromide a Rashba effect has been reported by angle-resolved photoemission and circular dichroism with giant values of 7-11 eV angstrom. We present band dispersion measurements of MAPbBr(3) and spin-resolved photoemission of CsPbBr3 to show that a large Rashba effect detectable by photoemission or circular dichroism does not exist and cannot be the origin of the high effciency.

Vanadium‐doped Bi2–xTe2.4Se0.6 single crystals, with x = 0.015 and 0.03, are grown by the Bridgman method. Bandstructure characterization by angle‐resolved photoemission spectroscopy (ARPES) measurements shows gapless topological surface states for both vanadium concentrations. The Van‐der‐Pauw resistivity, the Hall charge carrier density, and the mobility in the temperature range from 0.3 to 300 K are strongly dependent on vanadium concentration, with carrier densities as low as 1.5 × 1016 cm−3 and mobilities as high as 570 cm2 V−1s−1. As expected for transport in gapless topological surface states, the resistivity, carrier density, and mobility are constant below 10 K. The magnetoresistance shows weak antilocalization for both vanadium concentrations in the same temperature range. The weak antilocalization is analyzed with the Hikami–Larkin–Nagaoka model, which yields phase‐coherence lengths of up to 250 nm for x = 0.015. Deutsche Forschungsgemeinschaft http://dx.doi.org/10.13039/501100001659 Helmholtz-Gemeinschaft http://dx.doi.org/10.13039/501100001656

Spin-orbit interaction and structure inversion asymmetry in combination with magnetic ordering is a promising route to novel materials with highly mobile spin-polarized carriers at the surface. Spin-resolved measurements of the photoemission current from the Si-terminated surface of the antiferromagnet TbRh2Si2 and their analysis within an ab initio one-step theory unveil an unusual triple winding of the electron spin along the fourfold-symmetric constant energy contours of the surface states. A two-band k⋅p model is presented that yields the triple winding as a cubic Rashba effect. The curious in-plane spin-momentum locking is remarkably robust and remains intact across a paramagnetic-antiferromagnetic transition in spite of spin-orbit interaction on Rh atoms being considerably weaker than the out-of-plane exchange field due to the Tb 4f moments., This work was supported by the German Research Foundation (Grants No. KR-3831/5-1, No. LA655/20-1, GRK1621, Fermi-NESt No. ANR-16-CE92-0018, and SFB1143, project-id 247310070) and the Spanish Ministry of Science, Innovation, and Universities (Grant Nos. FIS2016-76617-P and MAT-2017-88374-P). We also acknowledge funding from the Department of Education of the Basque government (Grant No. IT1164-19), St. Petersburg State University (Project ID 51126254), and the Russian Foundation for Basic Research (Grant No. 20-32-70127). The SR-ARPES experiments at HiSOR were performed with the approval of the Proposal Assessing Committee of the Hiroshima Synchrotron Radiation Center (Proposal No. 18BG023). We also acknowledge the Impuls-und Vernetzungsfonds der Helmholtz Gemeinschaft (Grant No. HRSF-0067)

We show that, although the equilibrium band dispersion of the Shockley-type surface state of two-dimensional Au(111) quantum films grown on W(110) does not deviate from the expected free-electron-like behavior, its nonequilibrium energy-momentum dispersion probed by time- and angle-resolved photoemission exhibits a remarkable kink above the Fermi level due to a significant enhancement of the effective mass. The kink is pronounced for certain thicknesses of the Au quantum well and vanishes in the very thin limit. We identify the kink as induced by the coupling between the Au(111) surface state and emergent quantum-well states which probe directly the buried gold-tungsten interface. The signatures of the coupling are further revealed by our time-resolved measurements which show that surface state and quantum-well states thermalize together behaving as dynamically locked electron populations. In particular, relaxation of hot carriers following laser excitation is similar for both surface state and quantum-well states and much slower than expected for a bulk metallic system. The influence of quantum confinement on the interplay between elementary scattering processes of the electrons at the surface and ultrafast carrier transport in the direction perpendicular to the surface is shown to be the reason for the slow electron dynamics. Nanyang Technological University Published version Financial support from the Impuls-und Vernetzungsfonds der Helmholtz-Gemeinschaft under Grant No. HRSF-0067 (Helmholtz-Russia Joint Research Group) is gratefully acknowledged. M.B. gratefully acknowledges financial support from the Nanyang Technological University, NAP-SUG.

Renewed interest in the ferroelectric semi-conductor germanium telluride was recently triggered by the direct observation of a giant Rashba effect and a 30-year-old dream about a functional spin field-effect transistor. In this respect, all-electrical control of the spin texture in this material in combination with ferroelectric properties at the nanoscale would create advanced functionalities in spintronics and data information processing. Here, we investigate the atomic and electronic properties of GeTe bulk single crystals and their (111) surfaces. We succeeded in growing crystals possessing solely inversion domains of similar to 10 nm thickness parallel to each other. Using HAADF-TEM we observe two types of domain boundaries, one of them being similar in structure to the van der Waals gap in layered materials. This structure is responsible for the formation of surface domains with preferential Te-termination (similar to 68%) as we determined using photoelectron diffraction and XPS. The lateral dimensions of the surface domains are in the range of similar to 10-100 nm, and both Ge- and Te-terminations reveal no reconstruction. Using spin-ARPES we establish an intrinsic quantitative relationship between the spin polarization of pure bulk states and the relative contribution of different terminations, a result that is consistent with a reversal of the spin texture of the bulk Rashba bands for opposite configurations of the ferroelectric polarization within individual nanodomains. Our findings are important for potential applications of ferroelectric Rashba semiconductors in nonvolatile spintronic devices with advanced memory and computing capabilities at the nanoscale.

By measuring the spin polarization of GeTe films as a function of light polarization we observed that the bulk states are fully spin polarized in the initial state, in strong contrast with observations for other systems with a strong spin orbit interaction and the surface derived states in the same system. In agreement with state of the art theory, our experimental results show that fully spin polarized bulk states are an intrinsic property of the ferroelectric Rashba semiconductor amp; 945; GeTe 111 . The fact that the measured spin polarization vector does not change with light polarization can be explained by the absence of a mixing of states with a different total angular momentum J

Kürzlich wurde entdeckt, wie sich zwei Klassen topologischer Isolatoren ineinander überführen lassen. Die Art und Weise, wie das geschieht, verspricht neue funktionelle Eigenschaften in den Materialien. So lie en sich elektrische oder spintronische Kanäle mit Spannungspulsen ein und ausschalten

Topological insulators constitute a new phase of matter protected by symmetries. Time-reversal symmetry protects strong topological insulators of the Z2 class, which possess an odd number of metallic surface states with dispersion of a Dirac cone. Topological crystalline insulators are merely protected by individual crystal symmetries and exist for an even number of Dirac cones. Here, we demonstrate that Bi-doping of Pb1−xSnxSe (111) epilayers induces a quantum phase transition from a topological crystalline insulator to a Z2 topological insulator. This occurs because Bi-doping lifts the fourfold valley degeneracy and induces a gap at \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\bar \Gamma $$\end{document}Γ¯, while the three Dirac cones at the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\bar{\rm M}}$$\end{document}M¯ points of the surface Brillouin zone remain intact. We interpret this new phase transition as caused by a lattice distortion. Our findings extend the topological phase diagram enormously and make strong topological insulators switchable by distortions or electric fields., Transitions between topological phases of matter protected by different symmetries remain rare. Here, Mandal et al. report a quantum phase transition from a topological crystalline insulator to a Z2 topological insulator by doping Bi into Pb1-xSnxSe (111) thin films.

To realize spintronic devices based on topological insulators (TIs), well-defined interfaces between magnetic metals and TIs are required. Here, we characterize atomically precisely the interface between the 3d transition metal Fe and the TI Bi2Te3 at different stages of its formation. Using photoelectron diffraction and holography, we show that after deposition of up to 3 monolayers Fe on Bi2Te3 at room temperature, the Fe atoms are ordered at the interface despite the surface disorder revealed by our scanning-tunneling microscopy images. We find that Fe occupies two different sites: a hollow adatom deeply relaxed into the Bi2Te3 quintuple layers and an interstitial atom between the third (Te) and fourth (Bi) atomic layers. For both sites, our core-level photoemission spectra and density-functional theory calculations demonstrate simultaneous chemical bonding of Fe to both Te and Bi atoms. We further show that upon deposition of Fe up to a thickness of 20 nm, the Fe atoms penetrate deeper into the bulk forming a 2-5 nm interface layer containing FeTe. In addition, excessive Bi is pushed down into the bulk of Bi2Te3 leading to the formation of septuple layers of Bi3Te4 within a distance of similar to 25 nm from the interface. Controlling the magnetic properties of the complex interface structures revealed by our work will be of critical importance when optimizing the efficiency of spin injection in TI-based devices.

This work is supported by the Russian Science Foundation (Grants No. 18-12-00169 in part of the density functional calculations and No. 18-12-00062 in part of the photoemission measurements) and Saint Petersburg State University (Grant ID 40990069). The support from the Academic D.I. Mendeleev Fund Program of Tomsk State University (Project No. 8.1.01.2018), the Russian Foundation for Basic Researches (Grant No. 18-52-06009), the Science Development Foundation under the President of the Republic of Azerbaijan (Grant No. EIF/MQM/Elm-Tehsil-1-2016-1(26)-71/01/4-M33), the Basque Country Government, Departamento de Educacion, Universidades e Investigacion (Grants No. IT-756-13 and No. IT1301-19) and the Spanish Ministerio de Ciencia e Innovacion (Grant No. FIS2016-75862-P) are acknowledged. J.S.-B. gratefully acknowledges financial support from the Impuls-und Vernetzungsfonds der Helmholtz-Gemeinschaft under Grant No. HRSF-0067 (Helmholtz-Russia Joint Research Group). Calculations were partly performed using computational resources provided by Resource Center “Computer Center of SPbU” (http://cc.spbu.ru) and the SKIFCyberia sup

SmB

SmB6 is predicted to be the first member of the intersection of topological insulators and Kondo insulators, strongly correlated materials in which the Fermi level lies in the gap of a many-body resonance that forms by hybridization between localized and itinerant states. While robust, surface-only conductivity at low temperature and the observation of surface states at the expected high symmetry points appear to confirm this prediction, we find both surface states at the (100) surface to be topologically trivial. We find the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\bar{\varGamma }}$$\end{document}Γ¯ state to appear Rashba split and explain the prominent \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\bar X$$\end{document}X¯ state by a surface shift of the many-body resonance. We propose that the latter mechanism, which applies to several crystal terminations, can explain the unusual surface conductivity. While additional, as yet unobserved topological surface states cannot be excluded, our results show that a firm connection between the two material classes is still outstanding., Samarium hexahoride is argued to be a topological Kondo insulator, but this claim remains under debate. Here, Hlawenka et al. provide a topologically trivial explanation for the conducting states at the (100) surface of samarium hexaboride; an explanation based on Rashba splitting and a surface shift of the Kondo resonance.

Rapid development of experimental techniques has enabled real time studies of solid gas reactions at the level reaching the atomic scale. In the present paper, we focus on a combination of atomic resolution STEM/EDX, which visualizes the reaction zone, and near ambient pressure (NAP) XPS, which collects information for a surface layer of variable thickness under reaction conditions. We compare the behavior of two affined topological insulators, Bi2Te3 and Sb2Te3. We used a simple reaction with molecular oxygen occurring at 298 K, which is of practical importance to avoid material degradation. Despite certain limitations, a combination of in situ XPS and ex situ cross-sectional STEM/EDX allowed us to obtain a self-consistent picture of the solid gas reaction mechanism for oxidation of Sb2Te3 and Bi2Te3 crystals, which includes component redistribution between the oxide and the subsurface layer and Te segregation with formation of a thin ordered layer at the interface. The process is multistep in case of both compounds. At the very beginning of the oxidation process the reactivity is determined by the energy benefit of the corresponding element oxygen bond formation. Further in the oxidation process, the behavior of these two compounds becomes similar and features component redistribution between the oxide and the subsurface layer.

Structure inversion asymmetry is an inherent feature of quantum confined heterostructures with non equivalent interfaces. It leads to a spin splitting of the electron states and strongly affects the electronic band structure. The effect is particularly large in topological insulators because the topological surface states are extremely sensitive to the interfaces. Here, the first experimental observation and theoretical explication of this effect are reported for topological crystalline insulator quantum wells made of Pb1 amp; 8722;xSnxSe confined by Pb1 amp; 8722;yEuySe barriers on one side and by vacuum on the other. This provides a well defined structure asymmetry controlled by the surface condition. The electronic structure is mapped out by angle resolved photoemission spectroscopy and tight binding calculations, evidencing that the spin splitting decisively depends on hybridization and, thus, quantum well width. Most importantly, the topological boundary states are not only split in energy but also separated in space unlike conventional Rashba bands that are splitted only in momentum. The splitting can be strongly enhanced to very large values by control of the surface termination due to the charge imbalance at the polar quantum well surface. The findings thus, open up a wide parameter space for tuning of such systems for device applications

Magnetic doping is expected to open a band gap at the Dirac point of topological insulators by breaking time-reversal symmetry and to enable novel topological phases. Epitaxial (Bi$_{1-x}$Mn$_{x}$)$_{2}$Se$_{3}$ is a prototypical magnetic topological insulator with a pronounced surface band gap of $\sim100$ meV. We show that this gap is neither due to ferromagnetic order in the bulk or at the surface nor to the local magnetic moment of the Mn, making the system unsuitable for realizing the novel phases. We further show that Mn doping does not affect the inverted bulk band gap and the system remains topologically nontrivial. We suggest that strong resonant scattering processes cause the gap at the Dirac point and support this by the observation of in-gap states using resonant photoemission. Our findings establish a novel mechanism for gap opening in topological surface states which challenges the currently known conditions for topological protection., 26 pages, 7 figures

Topological materials promise new functionalities, which are revealed with the help of angle resolved photoemission. Herein, the search for the magnetic bandgap at the Dirac point as a precondition for the quantum anomalous Hall effect is reviewed and its opening for the topological insulator heterostructure MnBi2Te4 Bi2Te3 is demonstrated. Essential preconditions are explained and the reasons why nonmagnetic gaps occur when Se replaces Te. Angle resolved photoelectron spectroscopy ARPES probes the quantum mechanical final state, and this allows investigation of spin manipulation by light using spin resolved ARPES and the dependence of the charge carrier lifetime on the peculiar spin texture of topological states. It is shown that ARPES data do not support SmB6 as the first strongly correlated topological insulator and an alternative, trivial explanation for the results of ARPES and electrical transport experiments is formulated. Epitaxially grown topological crystalline insulators are, due to their dependence on crystal symmetries, more versatile in the control of individual bulk band inversions. It is shown that this leads to topological quantum phase transitions and associated novel functionalities. Finally, the surface and bulk band connectivity of a type II 3D Weyl semimetal is investigated and an outlook is given for the scientific field

SmB6 has recently attracted considerable interest as a candidate for the first strongly correlated topological insulator. Such materials promise entirely new properties such as correlation-enhanced bulk bandgaps or a Fermi surface from spin excitations. Whether SmB6 and its surface states are topological or trivial is still heavily disputed however, and a solution is hindered by major disagreement between angle-resolved photoemission (ARPES) and scanning tunneling microscopy (STM) results. Here, a combined ARPES and STM experiment is conducted. It is discovered that the STM contrast strongly depends on the bias voltage and reverses its sign beyond 1 V. It is shown that the understanding of this contrast reversal is the clue to resolving the discrepancy between ARPES and STM results. In particular, the scanning tunneling spectra reflect a low-energy electronic structure at the surface, which supports a trivial origin of the surface states and the surface metallicity of SmB6 .

The authors investigate the electronic and spin structure of topological surface states across a topological quantum phase transition. They find a surface band gap opening at the Dirac point of the topological surface states, giving rise to massive fermions with nonzero spin polarization on both sides of the phase transition. A mechanism of bulk-mediated scattering processes that increase with decreasing spin-orbit coupling strength is proposed as an explanation for the problem of the unconventional transformation between spin Dirac phases.

Using high-resolution angle-resolved photoemission, we observe a strong spin-dependent renormalization and lifetime broadening of the quasiparticle excitations in the electronic band structure of Ni(111) in an energy window of $\sim$0.3 eV below the Fermi level. We derive a quantitative result for the spin-dependent lifetime broadening by comparing the scattering rates of majority and minority $d$ states, and further show that spin-dependent electron correlations are instead negligible for $sp$ states. From our analysis we experimentally determine the effective on-site Coulomb interaction $U$ caused by Stoner-like interband transitions between majority and minority $d$ states. The present results unambiguously demonstrate the remarkable impact of spin-dependent electron correlation effects originating from single-particle excitations in a prototypical 3$d$ transition metal, paving the way for further refinement of current many-body theoretical approaches., 5 pages, 4 figures, submitted on 24.05.2018

We provide an overview of key fundamental aspects of a vastly growing field of research involving ferrimagnetic heterostructures, with special focus on their functionality in magnetic recording. We firstly describe various important achievements involving the transition to perpendicular magnetic recording and the concomitant increase of the areal density of magnetic bits, and analyze their future progress. This comprises emergent technologies such as heat-assisted magnetic recording, bit-patterned media as well as novel ways of controlling the magnetization through spin-transfer torques, spin Hall and Rashba-Edelstein effects, including their extension to the case of topological states of matter. Next, we highlight the discovery of all-optical switching in ferrimagnets, which offers unique possibilities for increasing the writing speeds via light-matter interaction. This effect has led to a tremendous interest in incorporating ferrimagnetic materials in magnetic memory devices. For this purpose, tunability of intrinsic magnetic properties of ferrimagnetic alloys is critically important. By highlighting exemplary investigations, we demonstrate the unique properties of ferrimagnets, such as magnetic compensation, spin reorientation, or noncollinear magnetic states, which allow for enhanced tunability of functional spintronic devices. In this respect, the miniaturization required to achieve ultrahigh areal bit densities leads to new fundamental challenges in both growth of magnetic nanostructures and control of magnetic properties of ferrimagnets in low dimensions. To this end, we discuss new functionalities of ferrimagnetic nanostructures that pave the way for their incorporation into established concepts of magnetic recording.

Ultrafast dynamics in three-dimensional topological insulators (TIs) opens new routes for increasing the speed of information transport up to frequencies thousand times faster than in modern electronics. However, up to date, disentangling the exact contributions from bulk and surface transport to the subpicosecond dynamics of these materials remains a difficult challenge. Here, using time- and angle-resolved photoemission, we demonstrate that driving a TI from the bulk-conducting into the bulk-insulating transport regime allows to selectively switch on and off the emergent channels of ultrafast transport between the surface and the bulk. We thus establish that ultrafast transport is one of the main driving mechanisms responsible for the decay of excited electrons in prototypical TIs following laser excitation. We further show how ultrafast transport strongly affects the thermalization and scattering dynamics of the excited states up to high energies above the Fermi level. In particular, we observe how inhibiting the transport channels leads to a thermalization bottleneck that substantially slows down electron-hole recombination via electron-electron scatterings. Our results pave the way for exploiting ultrafast transport to control thermalization time scales in TI-based optoelectronic applications, and expand the capabilities of TIs as intrinsic solar cells., Comment: 10 pages, 5 figures

Most recently, theoretical calculations predicted the stability of a novel two-dimensional phosphorus honeycomb lattice named blue phosphorus. Here, we report on the growth of blue phosphorus on Au(111) and unravel its structural details using diffraction, microscopy and theoretical calculations. Most importantly, by utilizing angle-resolved photoemission spectroscopy we identify its momentum-resolved electronic structure. We find that Au(111) breaks the sublattice symmetry of blue phosphorus leading to an orbital-dependent band renormalization upon the formation of a (4 × 4) superstructure. Notably, the semiconducting two-dimensional phosphorus realizes its valence band maximum at 0.9 eV binding energy, however, shifted in momentum space due to the substrate-induced band renormalization.

The behavior of ternary mixed crystals or solid solutions and its correlation with the properties of their binary constituents is of fundamental interest. Due to their unique potential for application in future information technology, mixed crystals of topological insulators with the spin-locked, gapless states on their surfaces attract huge attention of physicists, chemists and material scientists. (Bi1−xSbx)2Te3 solid solutions are among the best candidates for spintronic applications since the bulk carrier concentration can be tuned by varying x to obtain truly bulk-insulating samples, where the topological surface states largely contribute to the transport and the realization of the surface quantum Hall effect. As this ternary compound will be evidently used in the form of thin-film devices its chemical stability is an important practical issue. Based on the atomic resolution HAADF-TEM and EDX data together with the XPS results obtained both ex situ and in situ, we propose an atomistic picture of the mixed crystal reactivity compared to that of its binary constituents. We find that the surface reactivity is determined by the probability of oxygen attack on the Te–Sb bonds, which is directly proportional to the number of Te atoms bonded to at least one Sb atom. The oxidation mechanism includes formation of an amorphous antimony oxide at the very surface due to Sb diffusion from the first two quintuple layers, electron tunneling from the Fermi level of the crystal to oxygen, oxygen ion diffusion to the crystal, and finally, slow Te oxidation to the +4 oxidation state. The oxide layer thickness is limited by the electron transport, and the overall process resembles the Cabrera–Mott mechanism in metals. These observations are critical not only for current understanding of the chemical reactivity of complex crystals, but also to improve the performance of future spintronic devices based on topological materials.

By angle- and spin-resolved photoemission we have studied electronic structure and spin–orbit splitting in graphene/Ni(1 1 1) intercalated with alloy of high spin–orbit materials Bi and Au. Results are compared to ultimate cases of (i) graphene/Ni intercalated only with Au which shows giant Rashba splitting ( ∼ 100 meV) and (ii) graphene/Ni intercalated only with Bi for which spin splitting of the Dirac cone is nearly zero ( ⩽ 10 meV). Our results demonstrate that partial substitution of intercalated Au with Bi reduces spin splitting of the Dirac cone in graphene and even allows for its systematic adjustment through concentration of Bi. Observed effects are ascribed to peculiar electronic structure of Bi which has in the valence band no d electronic states responsible for the onset of giant Rashba effect through electronic hybridization with π band of graphene. We also report in details electronic properties of graphene/Ni(1 1 1) intercalated only with Bi in various concentrations. Such graphene reveals undistorted band structure characteristic to quasifreestanding graphene with small n-doping and a minor band gap at the Dirac point ( ∼ 200 meV) which depends weakly on the concentration of Bi. It has been shown that this gap is related to the symmetry breaking rather than to the topological phase formation.