Search

Abstract The development of supporting materials based on carbon nanotubes (CNTs) impregnated with iron nanoparticles via a sustainable and green synthesis employing plant extract of Punica granatum L. leaves was carried out for the iron nanoparticle modification and the following impregnation into the carbon nanotubes composites (CNT-Fe) that were also coated with polypyrrole (CNT-Fe + PPy) for use as electrode for supercapacitor and triboelectric nanogenerators. The electrochemical characterization of the materials by cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) assays revealed that the CNT-Fe + PPy gave rise to better performance due to the association of double-layer capacitance behavior of carbon derivative in association with the pseudocapacitance contribution of PPy resulting in an areal capacitance value 202 mF/ cm2 for the overall composite. In terms of the application of electrodes in triboelectric nanogenerators, the best performance for the composite of CNT-Fe + PPy was 60 V for output voltage and power density of 6 μW/cm2. The integrated system showed that the supercapacitors can be charged directly by the nanogenerator from 0 to 42 mV in 300 s. The successful green synthesis of iron nanoparticles on CNT and further PPy coating provides a feasible method for the design and synthesis of high-performance SCs and TENGs electrode materials. This work provides a systematic approach that moves the research front forward by generating data that underpins further research in self-powered electronic devices.

In this study, glutaraldehyde cross-linked chitosan support, as well as the catalysts obtained after loading Ag metal (Ag/Chitosan), were synthesised and applied for adsorption and reduction of phenol red dye in an aqueous solution. The Ag/chitosan catalysts were characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and inductively coupled plasma-optical emission spectrometry (ICP-OES) analysis techniques. The catalytic reduction and adsorption performance of phenol red dye with Ag/chitosan and cross-linked chitosan, respectively, was performed at ambient reaction conditions. The reduction of dye was carried out using sodium borohydride (NaBH4) as the reducing agent, while the progress of adsorption and reduction study was monitored with ultraviolet-visible (UV-vis) spectrophotometry technique. The reduction of the phenol red dye varied with the amount of catalyst, the concentration of NaBH4, Ag metal loading, reaction temperature, phenol red dye concentration and initial pH of the dye solution. The dye solution with a nearly-neutral pH (6.4) allowed efficient adsorption of the dye, while acidic (pH = 4) and alkaline (pH = 8, 11, 13.8) solutions showed incomplete or no adsorption of dye. The reusability of the Ag/chitosan catalyst was applied for the complete reduction of the dye, where no significant loss of catalytic activity was observed. Hence, the applicability of cross-linked chitosan and Ag/catalyst was thus proven for both adsorption and reduction of phenol red dye in an aqueous solution and can be applied for industrial wastewater treatment.

In this report, 1-ethyl-3-methylimidazolium acetate, [EMIM][AcO] ionic liquid (IL) and acetic acid (AA) comprised solvents were used for the thermal treatment of poly (vinylidene difluoride), PVDF. Here, besides the various combinations of IL and AA in solvents, the pure IL and AA were also applied as a solvent upon thermal treatments. The samples obtained after the treatment were analysed for structural and crystalline phase changes, porosity, and molecular weight distribution with various analytical techniques. The Kamlet-Taft parameters measurement of the IL and AA containing solvents with different solvatochromic dyes was also performed to examine their solvent properties and correlate with the properties of the treated PVDF materials. The treatment of PVDF with pure IL results in the formation of highly carbonaceous material due to extensive dehydroflurination (DHF) as well as possibly successive cross-linking in the polymer chains. Upon IL and AA combined solvent treatment, the neat PVDF which composed of both α- and β crystalline phases was transformed to porous and β-phase rich material whereas in case of pure AA the non-porous and pure α-phase polymeric entity was obtained. A combined mixture of IL and AA resulted in a limited the DHF process and subsequent cross-linking in the polymer chains of PVDF allowed the formation of a porous material. It was observed that the porosity of the thermally treated materials was steadily decreasing with increase in the amount of AA in solvents composition and solvent with an AA:IL mole ratio of 2:1 resulted in a PVDF material with the highest porosity amongst the applied solvents. A recovery method for the IL and AA combined solvent after the thermal treatment of PVDF was also established. Hence, with varying the type of solvents in terms of composition, the highly carbonaceous materials as well as materials with different porosities as well as crystalline phases can be obtained. Most importantly here, we introduced new IL and AA containing recoverable solvents for the synthesis of porous PVDF material with the electroactive β-phase.

A single run approach for rapid detection of nitrification inhibitor, dicyandiamide (DCD) using electrogenerated chlorine assisted polymerization through azo bond, under acidic conditions and at a preanodized screen printed carbon electrode (SPCE*) is presented. The role of chloride containing support electrolyte in acidic medium along with oxygen functionalities/edge sites are found to be crucial for the successful oxidative polymerization and subsequent adsorption of oxidized products on the electrode surface. The SEM, cyclic voltammetry and X-ray photoelectron spectroscopy studies were used to characterize the polymer film formation. The system exhibited a linear range between 20 and 170 μM with a detection limit of 3 μM (S/N = 3). The method was successfully tested for the detection of DCD in dairy and water samples. Simultaneous detection of DCD in the presence of melamine has also been demonstrated.

Dimethyl carbonate (DMC) and glycidol are considered industrially important chemical entities and there is a great benefit if these moieties can be synthesized from biomass-derived feedstocks such as glycerol or its derivatives. In this report, both DMC and glycidol were synthesized in an integrated process from glycerol derived 1,3-dichloro-2-propanol and CO2 through a metal-free reaction approach and at mild reaction conditions. Initially, the chlorinated cyclic carbonate, i.e., 3-chloro-1,2-propylenecarbonate was synthesized using the equivalent interaction of organic superbase 1,8-diazabicyclo [5.4.0] undec-7-ene (DBU) and 1,3-dichloro-2-propanol with CO2 at room temperature. Further, DMC and glycidol were synthesized by the base-catalyzed transesterification of 3-chloro-1,2-propylenecarbonate using DBU in methanol. The synthesis of 3-chloro-1,2-propylenecarbonate was performed in different solvents such as dimethyl sulfoxide (DMSO) and 2-methyltetrahydrofuran (2-Me-THF). In this case, 2-Me-THF further facilitated an easy separation of the product where a 97% recovery of the 3-chloro-1,2-propylenecarbonate was obtained compared to 63% with DMSO. The use of DBU as the base in the transformation of 3-chloro-1,2-propylenecarbonate further facilitates the conversion of the 3-chloro-1,2 propandiol that forms in situ during the transesterification process. Hence, in this synthetic approach, DBU not only eased the CO2 capture and served as a base catalyst in the transesterification process, but it also performed as a reservoir for chloride ions, which further facilitates the synthesis of 3-chloro-1,2-propylenecarbonate and glycidol in the overall process. The separation of the reaction components proceeded through the solvent extraction technique where a 93 and 89% recovery of the DMC and glycidol, respectively, were obtained. The DBU superbase was recovered from its chlorinated salt, [DBUH][Cl], via a neutralization technique. The progress of the reactions as well as the purity of the recovered chemical species was confirmed by means of the NMR analysis technique. Hence, a single base, as well as a renewable solvent comprising an integrated process approach was carried out under mild reaction conditions where CO2 sequestration along with industrially important chemicals such as dimethyl carbonate and glycidol were synthesized.

Background: Pretreatment is the critically important step for the production of ethanol from lignocelluloses. In this study, hardwood birch (Betula pendula) and softwood spruce (Norway spruce) woods were pretreated with a newly synthesized morpholinium ionic liquid, 1-H-3-methylmorpholinium chloride ([HMMorph][Cl]), followed by enzymatic hydrolysis and fermentation to ethanol. Results: [HMMorph][Cl] was synthesized using inexpensive raw materials, i.e., hydrochloric acid and N-methyl morpholine, following a simple process. The influence of pretreatment time (2, 3, 5, and 8 h) and temperature (120 and 140°C) in terms of hydrolysis efficiency was investigated. Glucose yields from enzymatic hydrolysis were improved from 13.7% to 45.7% and 12.9% to 51.8% after pretreatment of birch and spruce woods, respectively, under optimum pretreatment conditions (i.e., at 140°C for 3 h) as compared to those from pristine woods. Moreover, the yields of ethanol production from birch and spruce were increased to 34.8% and 44.2%, respectively, while the yields were negligible for untreated woods. Conclusions: This study demonstrated the ability of [HMMorph][Cl] as an inexpensive agent to pretreat both softwood and hardwood.How to cite: Mohammadi M, Shafiei M, Karimi K. Improvement of ethanol production from birch and spruce pretreated with 1‐H‐3‐methylmorpholinium chloride. Electron J Biotechnol 2019;41. https://doi.org/10.1016/j.ejbt.2019.07.004. Keywords: Betula, Biofuels, Cellulase, Cellulose, Ethanol, Hydrolysis, Ionic liquid, Lignin, Lignocellulose, Morpholinium ionic liquid, Pretreatment

A microwave assisted reaction protocol for Suzuki–Miyaura cross-coupling has been developed. Substituted arylboronic acids and arylsulfonyl chlorides coupled under microwave irradiation (MWI) to produce cross-biphenyls in high yields under aerobic condition. The principal advantage of this protocol is that formation of cross-biphenyls was achieved within shorter time along with desulfurization of arylsulfonyl chloride. In-situ generated Pd nanoparticles (NPs) act as catalyst in the reaction. Substituents like methyl, halogens, cyano, amino and t-butyl groups in arylboronic acids tolerate the reaction condition. Pd NPs could be reused several times under chosen reaction conditions without losing its activity significantly. The product formation and the role of the catalyst for the cross-coupling reaction has been rationalised with the help of a proposed mechanism. This reaction is one of the examples of In-situ generated Nanoparticles-catalyzed Organic Synthesis Enhancement (i-NOSE) approach. The approach derives its importance in terms of catalyst’s (i) simple preparation method, (ii) stability under the chosen reaction condition, (iii) substrate specificity, (iv) simple filtration to recover the catalyst and (v) easy regeneracy which clearly indicate that the approach could be applicable for various types of catalytic transformations.

Ionic liquids (ILs) have been receiving much attention as solvents in various areas of biochemistry because of their various beneficial properties over the volatile solvents and ILs availability in myriad variants (perhaps as many as 108) owing to the possibility of paring one cation with several anions and vice-versa as well as formulations as zwitterions. Their potential as solvents lies in their tendency to offer both directional and non-directional forces toward a solute molecule. Because of these forces, ionic liquids easily undergo intermolecular interactions with a range of polar/non-polar solutes, including biomolecules such as proteins and DNA. The interaction of genomic species in aqueous/non-aqueous states assists in unraveling their structure and functioning, which have implications in various biomedical applications. The charge density of ionic liquids renders them hydrophilic and hydrophobic, which retain intact over long-range of temperatures. Their ability in stabilizing or destabilizing the 3D-structure of a protein or the double-helical structure of DNA has been assessed superior to the water and volatile organic solvents. The aptitude of an ion in influencing the structure and stability of a native protein depends on their ranking in the Hofmeister series. However, at several instances, a reverse Hofmeister ordering of ions and specific ion-solute interaction has been observed. The capability of an ionic liquid in terms of the tendency to promote the coiling/uncoiling of DNA structure is noted to rely on the basicity, electrostatic interaction, and hydrophobicity of the ionic liquid in question. Any change in the DNA's double-helical structure reflects a change in its melting temperature (Tm), compared to a standard buffer solution. These changes in DNA structure have implications in biosensor design and targeted drug-delivery in biomedical applications. In the current review, we have attempted to highlight various aspects of ionic liquids that influence the structure and properties of proteins and DNA. In short, the review will address the issues related to the origin and strength of intermolecular interactions, the effect of structural components, their nature, and the influence of temperature, pH, and additives on them.

The density, sound velocity, and viscosity of 1-ethyl-3-methylimidazolium chloride [C2mim]Cl in pure water and aqueous solutions of some electrolytes such as potassium chloride, potassium carbonate, and potassium phosphate (weight fraction of salt fixed at ws = 0. 11) have been measured over a wide range of temperatures from 298.15 to 318.15 K. The obtained experimental data have been used to compute various volumetric, compressibility, and viscometric parameters, e.g., apparent molar properties, limiting apparent molar and transfer properties. The co-sphere overlap model was employed to describe the dominant intermolecular interactions in the ternary solutions. Additionally, the structure making/breaking nature of the [C2mim]Cl in the ternary solutions has been discussed in terms of Hepler's constant and the temperature derivative of viscosity B-coefficient (dB/dT). The activation free energy of solvent and solute, activation enthalpy, and activation entropy have been calculated by the application of transition state theory. The calculated parameters have been interpreted in the sense of solvent–solute and solute–solute interactions. The Fourier transform infrared (FTIR) studies also have been done for the studied systems. Volumetric, acoustic, viscometric, and spectroscopic studies can render some evidence and help to understand the aqueous solution behavior of ionic liquids.

High latitude soils can store around 40 % of the Earth’s soil carbon. Here, the authors add 13C-labeled cellulose to frozen mesocosms of boreal forest soils and find that cellulose biopolymers are hydrolysed under frozen conditions and therefore contribute to the slow degradation of soil organic matter.

Abstract Herein we report a 3D heterostructure comprising a hierarchical macroporous carbon foam that incorporates mesoporous carbon nanotubes decorated with cobalt oxide nanoparticles as an unique and highly efficient electrode material for the oxygen evolution reaction (OER) in electrocatalytic water splitting. The best performing electrode material showed high stability after 10 h, at constant potential of 1.7 V vs. RHE (reversible hydrogen electrode) in a 0.1 M KOH solution and high electrocatalytic activity in OER with low overpotential (0.38 V vs RHE at 10 mA cm−2). The excellent electrocatalytic performance of the electrode is rationalized by the overall 3D macroporous structure and with the firmly integrated CNTs directly grown on the foam, resulting in a large specific surface area, good electrical conductivity, as well as an efficient electrolyte transport into the whole electrode matrix concurrent with an ability to quickly dispose oxygen bubbles into the electrolyte. The eminent properties of the three-dimensional structured carbon matrix, which can be synthesized through a simple, scalable and cost effective pyrolysis process show that it has potential to be implemented in large-scale water electrolysis systems.

The removal of lignin from a high-temperature chemi-thermomechanical pulp (HT-CTMP) using a switchable ionic liquid prepared from an organic superbase (1,8-diazabicyclo-[5.4.0]-undec-7-ene (DBU)), monoethanol amine (MEA), and SO2 was investigated. The objective was to measure the fibre properties before and after removal of the lignin to analyse the contributions from lignin in the HT-CTMP fibre to the tensile properties. It was found that the fibre displacement at break - measured in zero span, which is related to fibre strain at break - was not influenced by the lignin removal in this ionic liquid system when tested dry. There was a small increase in displacement at break and a reduction in tensile strength at zero span when tested after rewetting. At short span, the displacement at break decreased slightly when lignin was removed, while tensile strength was almost unaffected when tested dry. Under rewetted conditions, the displacement at break increased and tensile strength decreased after lignin removal. Nevertheless, no dramatic differences in the pulp properties could be observed. Under the experimental conditions, treatment with the ionic liquid reduced the lignin content from 37.4 to 15.5 wt%.

Dehydration of sugars to 5-hydroxymethylfurfural (HMF) has recently been under intensive study by a multitude of research groups. On the other hand, when lignocellulosic biomass is applied as the starting material, very few studies can be found in the open literature. The direct synthesis of HMF, in line with the idea of “one-pot” synthesis strategy from lignocellulose, is demanding since the overall process should encompass dissolution, hydrolysis, and dehydration steps in a single processing unit. Ionic liquid-assisted methods to produce hydroxymethyl-furfural directly from lignocellulosic biomass are reported here together with a short overview of the most important biofuels. In reality, HMF is not suitable to be used as a single-component fuel as such, and, consequently, methods to produce HMF derivatives suitable as liquid fuels are reported.