Search

Purpose: The article's objective is formalization of the model, the main stages and creative methods of training technical specialists, the definition of features and directions for further education development in the post-industrial era. The article is aimed at revealing the nature of creativity, highlighting the essence of the functions of methods of creative activity and their importance for students of technical specialties. Design/methodology/approach: The work uses critical analysis of scientific and methodological sources, system and convergent analysis methods, generalization and systematization of practical experience. The method of convergent generalization made it possible to identify key indicators of the model of creative competencies. The conceptual model of creative competence was developed based on the results of cooperation on the frame of master's programs for the project managers training. For the practical part of research, a qualitative method was used (participant observation, individual interview, tests). Findings: The need to train technical specialists in the methods of creative search using modern technologies, which allows to achieve the effects of the intellectual potential development for the individual, the state and society, is justified. An experiment on training project managers of two Ukrainian institutes in creative technologies proved the feasibility of implementing such training. Based on the calculation of the creative competencies’ development of the first- and second-year study technical specialists, the need to add a mandatory creative component to educational programs has been determined. Implications/Recommendations: To assess the quality of training, a methodology for assessing the level of competence has been applied. This made it possible to identify a low level of some competencies and, at the stage of improving the curriculum, plan the necessary corrective actions for the development of weak components of competencies. Since project-oriented learning is used, the model is similar to the model of the classical project life cycle and will be especially useful in the implementation of innovative projects in production. The article presents a framework for teaching students creative competence, which can be used by other educational institutions. Originality/value: The review of literary sources proved that so far very little attention has been paid to the development of creative competencies in students of technical specialties, although these competencies will be the competitive advantage of a person in the competition with artificial intelligence. The model of creative competencies for the technical specialists training is presented, which is divided into four areas, which in turn are divided into four components. These areas relate to the sampling and systematization of knowledge; adaptation to user requirements; awareness and dissemination of hidden knowledge; transition to the active use of knowledge. [ABSTRACT FROM AUTHOR]

The formation of a development portfolio is one of the key challenges facing any level of system. The aim of the article is to present a model of optimal value-oriented portfolio formation for the development of a complex system, taking into account mutual influence of portfolio components on each other. It analyses the methodology of portfolio development management of organizations, considers different approaches to forming a portfolio of projects, proposes the formation of a portfolio of organization development based on the value-oriented approach, considers multi-criteria model of project selection in the organization development portfolio, taking into account the mutual influence of the components of the portfolio on each other. As the basic method of forming a portfolio of regional community development using the value-based approach, taking into account the existing limits on the total value of the portfolio in the computable period is proposed. The problems of incomplete application of the portfolio management methodology in the system of public development management in Ukraine were reflected. The paper determined that although the project approach is increasingly used in Ukraine to manage the development of territories, for many acute problems portfolio development management is not used. The necessity of managers training for portfolio management of regional systems development has been substantiated. Suggested the use of value-oriented methodology of project management to manage regional development, which significantly improves the quality of planning and effectiveness of the implementation of development strategy through projects. [ABSTRACT FROM AUTHOR]

Copyright of Jurídicas CUC is the property of Corporacion Universidad de la Costa, CUC and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The Li2WO4 single crystal was first grown by applying the Czochralski technique with weight control and low-temperature-gradients. A single crystal of Li2WO4 is one of the perspective materials for researching rare events. The heat capacity for a Li2W1−0.0125Mo0.0125O4 single crystal has been determined by DSC calorimetry in the temperature range 320–997 K for the first time. No anomalies in the heat capacity associated with phase transitions were found. The standard formation enthalpy for the Li2WO4 single crystal was studied using reaction calorimetry. It has been shown that the relation of standard formation enthalpies for Li2W1−xMoxO4 (x = 0.15–0) with function (1−x)W + xMo are close to linear, which allows one to predict the thermodynamic properties for single crystals with isotopes Li2W1861−0.0125Mo1000.0125O4 and Li2W186O4. It was shown that single crystals with isotopes are more thermodynamically stable than without isotopes. [ABSTRACT FROM AUTHOR]

The diffusion of hydrogen adsorbed inside layered MoS2 crystals has been studied by means of quasi-elastic neutron scattering, neutron spin-echo spectroscopy, nuclear reaction analysis, and X-ray photoelectron spectroscopy. The neutron time-of-flight and neutron spin-echo measurements demonstrate fast diffusion of hydrogen molecules parallel to the basal planes of the two dimensional crystal planes. At room temperature and above, this intra-layer diffusion is of a similar speed to the surface diffusion that has been observed in earlier studies for hydrogen atoms on Pt surfaces. A significantly slower hydrogen diffusion was observed perpendicular to the basal planes using nuclear reaction analysis. [ABSTRACT FROM AUTHOR]

The thermoelectric properties of a series of the polycrystalline samples of titanium dichalcogenides with partial substitution of Ti for Nb and S for Se were investigated. It was found that sintering of the samples improved the thermoelectric efficiency (ZT), and the maximum ZT was achieved at sintering temperature of 600°C. A further increase in the sintering temperature (850°C and 950°C) led to the recrystallization of the samples, as a result, the Seebeck coefficient sharply decreased and electrical conductivity dramatically increased. The temperature dependences of electrical conductivity σ(T) in the temperature range from 4.2 to 300 K and Seebeck coefficient S(T) in the temperature range from 77 to 300 K were investigated in order to determine the nature of the observed improvements in thermoelectric properties due to double substitutions and sintering. Two‐dimensionalization of electron transport properties of Ti1−xNbxS2−ySey solid solutions was found. The Fermi energy EF2D was estimated using the temperature dependences of Seebeck coefficient. The relationship between the Fermi energy EF2D and figure of merit ZT was established. The effect of sintering on parameters σ(T), S(T), charge carrier concentration (n2D), mobility (µ), and thermal conductivity (k) was found. The optimal value of Fermi energy EF2D in terms of figure of merit ZT = 0.31 at room temperature (T = 300 K) was found for Ti0.98Nb0.02S1.3Se0.7 sample sintered at 600°C. [ABSTRACT FROM AUTHOR]

We investigate the thermoelectric properties of bulk polycrystalline samples of WSe2‐based compounds with partial substitutions in the cationic (W) and the anionic (Se) sublattices in the temperature range from 4.2 to 650 K. The substitution of W for Nb leads to a significant increase in the charge carrier concentration, however, deteriorates the charge carrier mobility. In contrast, the substitution of selenium for sulfur increases the charge carrier mobility, the thermal conductivity, and the Seebeck coefficient but conductivity changes non‐monotonical. We show that the addition of sulfur in anionic sublattice affects the grain sizes in the polycrystalline material. Using substitutions in the anionic and cationic sublattices, we find the optimal ratio of the elements for better thermoelectric efficiency. The W0.98Nb0.02Se1.7S0.3 sample showed the best value of the figure of merit ZT = 0.26 (T = 650 K). [ABSTRACT FROM AUTHOR]

The Mo–S phase diagram exhibits two stable compounds: well-recognized layered molybdenum disulfide MoS2 and less studied molybdenum sesquisulfide Mo2S3. Here, we build a theoretical framework for the exfoliation of Mo2S3 based on density functional theory calculations and further experimentally prove its dispersibility under ultrasonic treatment and demonstrate its potential for use in gas detectors. First, we report computational studies of both Mo2S3 exfoliation and molecular adsorption on the Mo2S3 surface. The calculations reveal the preferential direction for the fragmentation of the Mo2S3 crystal along the (1̅01) plane and, likely, chemisorptive interaction of solvent molecules, such as H2O or DMSO, with the (1̅01) Mo2S3 surface. Next, we experimentally study the sonication of bulk Mo2S3 samples in organic solvents and show that, indeed, they may be converted to colloidal nanosized sheets. Solid particles in the dispersions retain the initial Mo2S3 crystal structure and have the shape of plates with typical thicknesses of 5–30 nm and lateral sizes of 100–400 nm. Finally, we investigate the gas sensing properties of the Mo2S3 films deposited from the dispersions towards moisture gas and several representative volatile organic compounds. [ABSTRACT FROM AUTHOR]

The Li 2 WO 4 single crystal was first grown by applying the Czochralski technique with weight control and low-temperature-gradients. A single crystal of Li 2 WO 4 is one of the perspective materials for researching rare events. The heat capacity for a Li 2 W 1-0.0125 Mo 0.0125 O 4 single crystal has been determined by DSC calorimetry in the temperature range 320-997 K for the first time. No anomalies in the heat capacity associated with phase transitions were found. The standard formation enthalpy for the Li 2 WO 4 single crystal was studied using reaction calorimetry. It has been shown that the relation of standard formation enthalpies for Li 2 W 1- x Mo x O 4 ( x = 0.15-0) with function (1- x )W + x Mo are close to linear, which allows one to predict the thermodynamic properties for single crystals with isotopes Li 2 W 186 1-0.0125 Mo 100 0.0125 O 4 and Li 2 W 186 O 4 . It was shown that single crystals with isotopes are more thermodynamically stable than without isotopes.