Search

The use of perylenediimide (PDI) building blocks in materials for organic electronic is of considerable interest. The introduction of peripheral groups in their ortho and bay positions radically modify their optoelectronic properties. In this article, we describe an efficient method to afford regioisomerically pure 1,6/7-(NO2)2- and (NH2)2-PDIs employing two key steps: the selective crystallization of 1,6-(NO2)2-perylene-3,4,9,10-tetracarboxy tetrabutylester and the nitration of regiopure 1,7-Br2-PDI with silver nitrite. The optoelectronic properties of the resulting regioisomerically pure dinitro, diamino-PDIs and bisazacoronenediimides (BACDs) are reported and demonstrate the need to separate both regioisomers of such n-type organic semiconductors for their inclusion in advanced optoelectronic devices.

Motion-induced change in emission (MICE) is a phenomenon that can be employed to develop various types of probes, including temperature and viscosity sensors. Although MICE, arising from the conformational motion in particular compounds, has been studied extensively, this phenomenon has not been investigated in depth in mechanically interlocked molecules (MIMs) undergoing coconformational changes. Herein, we report the investigation of a thermoresponsive dynamic homo[2]catenane incorporating pyrene units and displaying relative circumrotational motions of its cyclophanes as evidenced by variable-temperature

A multi-environment computational approach is proposed to study the modulation of the emission behavior of the triphenylamine (Z)-4-benzylidene-2-methyloxazol-5(4H)-one (TPA-BMO) molecule [Tang et al., J. Phys. Chem. C 119, 21875 (2015)]. We aim at (1) proposing a realistic description of the molecule in several environments (solution, aggregate, polymer matrix), (2) modelling its absorption and emission properties, and (3) providing a qualitative understanding of the experimental observations by highlighting the photophysical phenomena leading to the emission modulation. To this purpose, we rely on (TD-)DFT calculations and classical Molecular Dynamics simulations, but also on the hybrid ONIOM QM/QM' approach and the in situ chemical polymerization methodology. In low-polar solvents, the investigation of the potential energy surfaces and the modulation of the emission quantum yield can be attributed to possible photophysical energy dissipation caused by low-frequency vibrational modes. In the aggregate and in the polymer matrix, the emission modulation can be qualitatively interpreted in terms of the possible restriction of the intramolecular vibrations. For these two systems, our study highlights that a careful modelling of the environment is far from trivial but is fundamental to model the optical properties of the fluorophore.

Here, we report an approach to the synthesis of highly charged enantiopure cyclophanes by the insertion of axially chiral enantiomeric binaphthyl fluorophores into the constitutions of pyridinium-based macrocycles. Remarkably, these fluorescent tetracationic cyclophanes exhibit a significant AIE compared to their neutral optically active binaphthyl precursors. A combination of theoretical calculations and time-resolved spectroscopy reveal that the AIE originates from limited torsional vibrations associated with the axes of chirality present in the chiral enantiomeric binaphthyl units and the fine-tuning of their electronic landscape when incorporated within the cyclophane structure. Furthermore, these highly charged enantiopure cyclophanes display CPL responses both in solution and in the aggregated state. This unique duality of AIE and CPL in these tetracationic cyclophanes is destined to be of major importance in future development of photonic devices and bio-applications., National Science Foundation (NSF) DMR-2003739, United States Department of Energy (DOE) DE-SC0000989, SHyNE Resource NSF ECCS-2025633, IIN, Northwestern's MRSEC program NSF DMR-1720139, MCIN/AIE EQC2019-006543-P, ERDF A way of making Europe, FEDER(ERDF)/Junta de Andalucia-Consejeria de Transformacion Economica, Industria, Conocimiento y Universidades P18-FR-2877

Two families of organic molecules with different backbones have been considered. The first family is based on a macrolactam-like unit that is constrained in a particular conformation. The second family is composed by a substituted central phenyl that allows a larger mobility for its substituents. They have however a common feature, three amide moieties (within the cycle for the macrolactam-like molecule and as substituents for the phenyl) that permit hydrogen bonding when molecules are stacked. In this study we propose a computational protocol to unravel the ability of the different families to self-assemble into organic nanotubes. Starting from the monomer and going towards larger assemblies like dimers, trimers, and pentamers we applied the different protocols to rationalize the behavior of the different assemblies. Both structures and thermodynamics were investigated to give a complete picture of the process. Thanks to the combination of a quantum mechanics approach and molecular dynamics simulations along with the use of tailored tools (non covalent interaction visualization) and techniques (umbrella sampling), we have been able to differentiate the two families and highlight the best candidate for self-assembling purposes.

Photonastic materials present a directional and repeatable deformation of the material shape due to transduction from light energy to mechanical energy. Among these materials, light-responsive polymers, composed of photochromic molecules embedded in a polymer matrix, are of high interest. The present work aims at laying the foundation stone of the modeling of the photomechanical behavior of such systems by proposing a computational strategy that is able to investigate (i) the impact of the polymer matrix on the photochromic properties of a dithienylethene (DTE) switch and (ii) the impact of the photochromic reaction on the polymer environment. Contrary to previous approaches, the present model is able to propose a realistic arrangement of the photochrome embedded in the polymer film, thanks to the adaptation of the so-called "controlled-like polymerization algorithm" [Lemarchand, C. A.; J. Chem. Phys. 2019, 50, 224902]. Our strategy relies on molecular dynamics (MD) simulations and time-dependent density functional theory (DFT) calculations. Careful analysis of MD trajectories and comparison with simulations in solution have shown the rigidification of the DTE molecule due to the presence of the polymer chains, which hindered the interconversion between the DTE open-form isomers and can probably modify the photocyclization quantum yield. Besides, the UV-vis absorption properties of the DTE open-form isomers are more impacted by the polymer embedding than its closed-form counterpart. Concerning the impact of the photoreaction on the polymer matrix, the time evolution of the pressure tensor and of the atomic displacements in the matrix have shown that (i) the cyclization reaction has a negligible impact; (ii) the cycloreversion reaction induces a locally large and anisotropic pressure increase and leads to a collective displacement of the polymer matrix away from the reactive center; and (iii) the characteristic time scale associated with these coupled processes is below 1 ps. Therefore, the two processes involved in photonastic motions, namely, the photoreaction and the relaxation of the polymer matrix after the photoswitch structural change, cannot be decoupled.

A dithienylethene (DTE) photochromic compound functionalized by ureidopyrimidinone (UPy) quadruple hydrogen bonding blocks was synthesized by Takeshita and coworkers [Takeshita et al., Chem. Commun., 2005, 761] in order to form a light-responsive supramolecular self-assembling system. In solution, the formation of supramolecular assemblies was only observed for one DTE isomer, namely the closed-form isomer. To rationalize this experimental finding, with the help of Molecular Dynamics (MD) and (time-dependent) DFT calculations, the behaviour of open-form and closed-form monomers, dimers, hexamers and π-stacked dimers in solution is investigated. Our simulations show that, for the open-form oligomers, the progression of the supramolecular assembly is hindered due to (i) the possible formation of a very stable cyclic dimer for the open-form parallel isomer, (ii) the relative flexibility of the open-form oligomers compared to their closed-form counterparts, and (iii) the possible existence of π-stacked dimers that constitute bottlenecks blocking the progression of the supramolecular self-assembly.

We report a QM (TD-DFT) and QM/QM' (ONIOM) study of the modulation of emission in a series of thiazolo[5,4,b]thieno[3,2-e]pyridine (TTP) derivatives [Huang et al., J. Mater. Chem. C, 2017, 14, 3456]. By computing the excitation energy transfer couplings and the Huang-Rhys (HR) factors, we rationalize the aggregation-caused quenching (ACQ) observed for the parent molecule and the crystallization-induced emission (CIE) observed for the derivatives presenting intra-molecular H-bonding. We also show that the CIE strategy relying on the rigidification of the arch-bridge-like stator should be considered with caution since it can promote the energy dissipation through vibrational motions.

Two families of organic molecules with different backbones have been considered. The first family, composed by a substituted central phenyl is considered as flexible. The second one, based on a macrolactam-like unit, is considered as rigid. They have however a common feature, three amide moieties (as substituents for the phenyl and within the cycle for the macrolactam-like molecule) that allow hydrogen bonding when molecules are stacked. In this study we propose a computational protocol to unravel the ability of the different families to self-assemble into organic nanotubes. Starting from the monomer and going towards larger assemblies like dimers, trimers, and pentamers we applied different theoretical protocols to rationalize the behavior of the different assemblies. Both structures and thermodynamics were investigated to give a complete picture of the process. Thanks to the combination of a quantum mechanics approach and molecular dynamics simulations along with the use of tailored tools (non covalent interaction visualization) and techniques (umbrella sampling), we have been able to differentiate the two families and highlight the best candidate for self-assembling purposes.

A multi-scale and multi-environment computational approach is proposed to study of the modulation of the emission behavior of the triphenylamine (Z)-4-benzylidene-2-methyloxazol-5(4H)-one (TPA-BMO) molecule [Tang et al., J. Phys. Chem. C,119, 21875 (2015)]. Going from (TD-)DFT calculations to classical Molecular Dynamics simulations through the hybrid ONIOM QM/QM’ approach and the in situ chemical polymerization methodology, we have rationalized distinct photophysical phenomena: (1) in low-polar solvents, a polarity-dependent solvatochromic effect as well as a modulation of the emission quantum yield, attributed to possible photophysical energy dissipation caused by low-frequency vibrational modes, (2) in the aggregate, a subtle competition between an excitonic coupling and a restriction of the intramolecular vibrations leading to an Aggregation-Induced Emission behavior, and (3) in the polymer matrix, an antagonist effect between the loss of global flexibility and the presence of vibrational modes similar to those observed in solution, explaining a similar emissive behavior within the polymer.

The dipyrrolyldiphenylethene (DPYDPE) molecule shows a switching between aggregation-induced-emission (AIE) and crystallization-induced emission (CIE) upon modification of the stereochemistry of the molecule. Herein, we propose a theoretical study based on molecular dynamics, time-dependent (TD-) density functional theory (DFT), and QM/QM′ calculations to investigate the structural and optical properties of the E and Z isomers in three different phases (solution, crystal, and aggregate). By computing the Huang–Rhys factors and the reorganization energies, we demonstrate that the fluorescence quenching observed in solution for both isomers is due to a nonradiative decay process involving low-frequency vibrational modes assigned to scissoring motions. In the crystal and in the aggregates, the effects of steric hindrance strongly modify the topology of the potential energy surface of the first excited state, and this results in a restriction of the vibrational modes involved in the energy dissipation. The mo...

The straightforward synthesis of a new Cu(I) metal-rich small metallacycle is presented. This compound is luminescent in the solid state with an emission quantum yield of 72% at room temperature and displays a pronounced reversible red-shift of its emission spectra upon cooling. Quantum chemical calculations reveal that these properties are governed by important geometrical relaxations that imply the formation of cuprophilic interactions at the excited states.

International audience; The chemical bond between actinide and the transition metal unsupported by bridging ligands is not well characterized. In this paper we study the electronic properties, bonding nature and optical spectra in a family of [Cp2ThMCp(CO)2](+) complexes where M = Fe, Ru, Os, based on the relativistic two component density functional theory calculations. The Morokuma-Ziegler energy decomposition analysis shows an important ionic contribution in the Th-M interaction with around 25% of covalent character. Clearly, charge transfer occurs on Th-M bond formation, however the orbital term most likely represents a strong charge rearrangement in the fragments due to the interaction. Finally the spin-orbit-ZORA calculation shows the possible NIR emission induced by the [FeCp(CO)2](-) chromophore accomplishing the antenna effect that justifies the sensitization of the actinide complexes.