Search

Abstract: Thin film capacitors with a thickness of 200nm were prepared on SrTiO3 (100), (110) and (111) single crystal substrates at a temperature of 973K by pulsed laser deposition (PLD) using a KrF excimer laser in an O2–O3 atmosphere with a gas pressure of 1Pa using an X7R sintered target. As a result, perovskite BaTiO3 solid solution films were obtained. In the X7R thin films on (100) and (110) SrTiO3, only diffraction peaks with strong intensities from BaTiO3 (100) and (110), respectively, were observed. X7R films on SrTiO3 (111) were grown epitaxially oriented to the crystal plane direction of the substrate by inserting an initial homoepitaxial SrTiO3 layer with a thickness of 4nm. The X7R/SrTiO3 film capacitors yielded a large volumetric efficiency of 50μF/mm3 and a temperature coefficient of capacitance (TCC) of −1.3% to 1.3% which satisfies the EIA standard specifications for X7R. [Copyright &y& Elsevier]

Presents a study which designed a dual-mode thickness-shear quartz pressure sensor for crystal quartz gauge at high pressures and temperatures. Resonator characteristics; Types of quartz pressure sensors used in the petroleum industry; Schematic diagram of the measurement setup used in long-term stability tests; Conclusions.

A serious problem of fingerprint verification devices which are easily available on the market is how to handle ‘‘dry fingers,’’ which make the reading of fingerprints difficult and often result in incorrect verification. Dry fingers are frequently observed in the elderly and in housewives who are frequently engaged in wet work. In these cases, the observed fingerprint tends to become an eroded fingerprint image, with disconnected ridges. This paper proposes a method of handling eroded fingerprint images in which such images that will result in incorrect verification are automatically identified and the ridges are recovered rapidly. First, a method for image quality evaluation that consists of evaluating the noise in the fingerprint image is discussed and the effectiveness of the method is demonstrated. Then, simple ridge recovery is performed by using edge emphasis for images which are automatically judged to be eroded fingerprints. In the experiment, a fingerprint database was acquired in winter, when dry fingers are common. The acceptance rate for the right person (recognition rate) is found to be 94.8% when the rejection rate for other persons is set as 99.99%. When the ridges are recovered in fingerprint images whose quality is judged to be low by the image evaluation measure proposed in this paper, the recognition rate is improved to 96.2%. Furthermore, when tolerance to dry fingers is considered and verification is not performed for low-quality image judged to be difficult to recover, the recognition rate is improved to 97.2%. In environments in which few users have dry fingers, the recognition rate will be improved to 98.8% when the rejection rate for other persons is set as 99.99%. © 2007 Wiley Periodicals, Inc. Electron Comm Jpn Pt 3, 90(10): 40– 53, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/ecjc.20345 [ABSTRACT FROM AUTHOR]

Abstract: Five novel compounds (1–3, 5, and 6), and two known ones (4 and 7) were isolated from the culture broth of Agrocybe praecox. Their structures were determined by the interpretation of spectroscopic data. Compounds 1–4 inhibited hypocotyl growth of lettuce, and 1, 3, and 4 inhibited the root growth. [Copyright &y& Elsevier]