Search

Carnassial teeth, as one of the most important teeth in dogs, are commonly affected by different types of injuries and pathological disorders, which require endodontic treatment. Lateral canals, which leave the main root canal, and apical deltas are present in the root canal system of dogs. These canals represent small branches that leave the main root canal at a sharp angle and terminate in a region of the periodontal ligament on the external root surface. In this study, 200 teeth were included, of which 100 were superior fourth premolars and 100 were inferior first molars. Lateral canals were present in a total of 30 roots of superior fourth premolar teeth, whereas in inferior first molars, these canals were found in 3% of roots. In superior fourth premolars, lateral canals were mostly present in the apical third, 86%, while 14% were present in the middle third of the root. In inferior first molars, lateral canals were found in 3% of the roots, 2% in the apical third and 1% in the middle third of the roots. The knowledge of the complex root canal morphology is essential for any endodontic treatment. Due to the presence and frequency of lateral canals, it is imperative to perform more thorough cleaning and instrumentation while performing endodontic treatment on superior fourth premolars compared to inferior first molars., Competing Interests: Declaration of competing interest All the authors have read and approved the manuscript. The authors have no conflict of interests to declare., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Objective: Molar crown configuration plays an important role in systematics, and functional and comparative morphology. In particular, the number of cusps on primate molars is often used to identify fossil species and infer their phylogenetic relationships. However, this variability deserves renewed consideration as a number of studies now highlight important developmental mechanisms that may be responsible for the presence of molar cusps in some mammalian taxa. Experimental studies of rodent molars suggest that cusps form under a morphodynamic, patterning cascade model of development (PCM) that involve the iterative formation of enamel knots. This model posits that the size, shape and location of the first-forming cusps determines the presence and positioning of later-forming cusps., Design: Here we test whether variation in accessory cusp presence in 13 Macaca fascicularis mandibular second molars (M2s) is consistent with predictions of the PCM. Using micro-CT, we imaged these M2s and employed geometric morphometrics to examine whether shape variation in the enamel-dentine junction (EDJ) correlates with accessory cusp presence., Results: We find that accessory cusp patterning in macaque M2s is broadly consistent with the PCM. Molars with accessory cusps were larger in size and possessed shorter relative cusp heights compared to molars without accessory cusps. Peripheral cusp formation was also associated with more centrally positioned primary cusps, as predicted by the PCM., Conclusions: While these results demonstrate that a patterning cascade model is broadly appropriate for interpreting cusp variation in Macaca fascicularis molars, it does not explain all manifestations of accessory cusp expression in this sample., Competing Interests: Declaration of Competing Interest The authors have no competing interest to disclose., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Heleocola piceanus, a new, relatively large metatherian from Upper Cretaceous ('Edmontonian') strata of the Williams Fork Formation in northwestern Colorado is described, based on a recently discovered jaw fragment (MWC 9744), in addition to three isolated teeth initially referred by other studies to Aquiladelphis incus and Glasbius piceanus. Although sharing several morphologic characters with the Lancian genus Glasbius, H. piceanus lower molars are considerably larger than those of Glasbius and differ from the latter in lacking a buccal cingulid, possessing carnassiform notches on the cristid obliqua and entocristid, and bearing an entoconulid on m3. To examine the relationship of Heleocola piceanus to other metatherians, H. piceanus was scored into a previously existing taxon-character matrix. Our phylogenetic analysis recovers H. piceanus as the sister taxon to Glasbius, which is consistent with our morphologic comparisons. H. piceanus represents the oldest member of the Glasbiidae. A regression equation for predicting body mass of dentally conservative metatherians that utilizes the length of m1 estimates the mass of H. piceanus at 855-1170 g, which is comparable in mass to today's muskrat (Ondatra zibethicus) and large relative to other Late Cretaceous pediomyoids. Based upon its molar morphology, specifically the low inflated cusps, low height differential between the trigonid and talonid, and near-bunodont morphology, H. piceanus is interpreted as an omnivore with a plant-dominated diet., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Eberle et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Purpose: The aim of this study was to investigate the accessory root canal morphology of maxillary first molars in a Black South African subpopulation., Methods: Micro-computed tomography was used to investigate 101 maxillary first molars (from 50 male and 51 female teeth, right 53 teeth, left 48 teeth). The prevalence of chamber canals, and the number, type and location (root third) of accessory canals were recorded. The relationships between arch side, sex and age were examined using chi-squared tests of association. Intra- and inter-observer reliability were assessed using Cohen's kappa test., Results: Intra- and inter-rater agreement was 96.9% and 98.1%, respectively. Variations in accessory root canal anatomy according to side, sex and age were evident. Chamber canals were identified in 10.9% of teeth. Accessory canals were found mainly in the apical third of most teeth in the sample, and distributed predominantly in the mesio-buccal root. Apical deltas were most prevalent in the mesio-buccal root, and their frequency decreased in the palatal and then finally the disto-buccal root., Conclusion: Accessory root canals were common in this population, and showed a diverse range of anatomy. The present findings will be of assistance to clinicians during endodontic treatment and will also be valuable for educational purposes.

The phylogenetic relationships of the small-bodied catarrhine Pliobates cataloniae (∼11.6 Ma, NE Iberian Peninsula) have been controversial since its original description. However, the recent report of additional dentognathic remains has supported its crouzeliid pliopithecoid status. Based on the available hypodigm, the molar enamel-dentine junction (EDJ) shape of P. cataloniae is compared with that of other pliopithecoids from the same basin as well as both extinct and extant hominoids to further evaluate its pliopithecoid affinities. We also quantitatively compare the EDJ shape among these taxa by means of landmark-based three-dimensional geometric morphometrics using principal component analysis (PCA), canonical variate analysis, and between-group PCA. Permutation tests are performed to test whether Pliobates variation exceeds that of extant hominoid genera. Results indicate that Pliobates is similar in molar EDJ shape to other pliopithecoids, particularly crouzeliids. The variation displayed by Pliobates upper molars is less marked at the EDJ level than at the outer enamel surface, probably owing to differential enamel wear and intraspecific differences in enamel thickness. Multivariate analyses of EDJ shape show that all pliopithecoids (including Pliobates) cluster together in the PCAs, canonical variate analyses, and between-group PCAs and occupy a different portion of the morphospaces from extinct and extant hominoids. Posterior and typicality probabilities strongly support the classification of Pliobates as a pliopithecoid, wheras permutation tests fail to reject the single-genus hypothesis for the P. cataloniae hypodigm. We conclude that P. cataloniae is a crouzeliid pliopithecoid, as recently supported by cladistic analyses of craniodental characters, and that previous cladistic results that supported a stem hominoid status are attributable to postcranial convergences with crown hominoids. Our results further highlight the potential of three-dimensional geometric morphometrics analyses of the EDJ shape for better informing fossil primate alpha-taxonomy by means of quantitatively testing hypotheses about tooth shape variation., Competing Interests: Declaration of competing interest There is no conflict of interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: This study aimed to investigate the differences in the buccolingual inclination and transverse width of maxillary and mandibular first molars among different vertical facial types., Methods: In all, 78 samples were divided into three groups based on the GoGn-SN angle: the low-angle group (n = 26, mean age=24.21±5.11), average-angle group (n = 26, mean age=22.66±3.72), and high-angle group (n = 26, mean age=22.23±2.43). Cone beam computed tomography (CBCT) measurements were used to assess the buccolingual inclination of the axis of the maxillary and mandibular first molars, as well as the buccolingual inclination of the alveolar bone, the dental arch width, and the basal bone width. One-way ANOVA, the LSD test, and Pearson correlation analysis were performed., Results: The high-angle group showed significantly greater lingual inclination of the maxillary alveolar bone than the low-angle group and average-angle group (p < 0.001; p < 0.05). The difference in buccolingual inclination of the axis of the maxillary first molar and the alveolar bone was significantly greater in the high-angle group than in the low-angle group (p < 0.05). Both the maxillary and mandibular dental arch were significantly narrower in the high-angle group than in the other two groups. The mandibular basal bone was also significantly narrower in the high-angle group than in the low-angle group and average-angle group (p < 0.001; p < 0.01)., Conclusions: The alveolar bone of maxillary first molar in the high-angle group was more palatal inclined than that the low-angle group and the average-angle group, which suggests that orthodontists should pay more attention to the root-bone relationship in the high-angle group during expansion treatment to prevent bone fenestration and dehiscense., Competing Interests: Declaration of competing interest None., (Copyright © 2024 The Authors. Published by Elsevier Masson SAS.. All rights reserved.)

Introduction and Aims: Violations of the mandibular canal (MC) and mental foramen (MF) and subsequent injuries to their neurovascular bundle have been reported after surgical and nonsurgical dental procedures. Besides using advanced technologies such as cone-beam computed tomography (CBCT), clinicians should be aware of the anatomy and location of MC and MF in different populations. This study aims to describe the morphologic characteristics of the MF, MC, and its intrabony location in relation to the apices of mandibular posterior teeth in an Emirati subpopulation using CBCT., Methods: A total of 3700 CBCT scans were screened, and 154 scans that met the inclusion and exclusion criteria were randomly selected. The scans were assessed using 3-dimensional multiplanar imaging for the following structures: the location of MF and the MC course, its intrabony location, and its relationship to the apices of the mandibular posterior teeth. The data were analysed statistically using SPSS software., Results: The MC ran lingually and inferiorly at the posterior region and became more buccal and superior towards the MF. The distal root of the mandibular second molar was found to be the closest root to the MC (2.06 ± 1.83 mm). Moreover, the most common location of the MF was distal to the contact area between the 2 premolars (0.83 ± 1.84 mm) with a significant negative correlation to age (with and increase in age, the MF moves distally). The distance between the root apices and the MC was statistically significantly affected by age (positive correlation) and gender (male patients had a greater distance)., Conclusions: The common course of the MC is lingual and inferior posteriorly and becomes more buccal and superior towards the MF, which is located mostly between the mandibular first and second premolars. Furthermore, the distal root of the mandibular second molar is the closest to the MC and has a positive relationship with age., Competing Interests: Conflict of interest None disclosed., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

This study aims to compare the shaping ability of three systems using micro-computed tomography (micro-CT). Moderately-curved mesial canals of 36 mandibular molars were assigned to three groups (n = 24); Protaper Next (PTN, 0.25, 0.06), WaveOne Gold (WOG, 0.25, 0.07), TruNatomy (TRN, 0.25, 0.04), and instrumentation was performed. Pre- and post-micro-CT scans were obtained. Canal volume and surface, structure model index (SMI), centroid shift, canal transportation, and untouched canal were analyzed. One-way ANOVA and Student's t-test were used for statistics. There was no difference in SMI, centroid shift, and centering ability between the study groups (p > .05). Removed dentin and canal surface changes were lower in TRN, while untouched dentin walls were higher (p < .05). Cross-sections became more rounded (p < .05), but not significant between groups (p > .05). Considering the removed dentin by TRN, it can be used in critical dentin thickness, such as the danger zone (DZ). PTN, WOG, and WOG kept the original canal course similarly. Untouched dentin by TRN (41%) was wider than PTN and WOG, consequently, meticulous irrigation is recommended. TRN, which provides a controlled increase in canal volume, can be used in thin dentin such as the DZ, however, its use should be supported by copious irrigation and brushing considering the rate of untouched dentin walls. RESEARCH HIGHLIGHTS: TRN presented a higher untouched dentin wall compared to PTN and WOG. Canal volume and surface changes were the lowest in the TRN group. The centering abilities were similar in PTN, WOG, and TRN., (© 2024 The Author(s). Microscopy Research and Technique published by Wiley Periodicals LLC.)

Background: To investigate the anatomic features of the root furcation of permanent mandibular first molars., Methods: A total of 50 extracted mandibular first molars (25 two-rooted and 25 three-rooted) were collected and scanned using micro-computed tomography. The digital models of teeth and root canal systems were reconstructed three-dimensionally. The tooth models were displayed in parallel projection mode from buccal and distal views. Screenshots were captured and subsequently analyzed using Image-Pro Plus 6.0 software after calibration. The furcation angle, root trunk length, maximum depth and level of distal root concaves of mesial roots, and length of enamel projections were measured, and the furcation types (classified into type V, type U and type W) were detected. Statistical analysis was performed using the Shapiro-Wilk's test, one-way analysis of variance, Student's t-test and Chi-square test., Results: The mean furcation angle between the distobuccal (DB) and distolingual (DL) roots (in distal view) was the greatest (59.2°), whereas the furcation angle between the mesial and DL roots (in buccal view) was the smallest (25.4°) among the four furcation angles (all p < 0.05). Regarding the furcation types, bucco-lingual root trunk length, maximum depth and site of the distal root concavities, and enamel projection length, no significant differences were detected between the three- and two-rooted molar groups (all p > 0.05). The frequency of type V was the highest (54.0%), followed by type U (26.0%), and type W had the lowest occurrence rate (20.0%). The mean length of distal root trunk in the three-rooted mandibular molars was significantly greater than that of the buccal/lingual one (3.7 mm vs. 3.0 mm, p < 0.01). The maximum depth of the distal concavities of the mesial roots was on average 0.66 ± 0.19 mm, and the site was located at an average of 2.8 ± 1.3 mm below furcation. The mean length of buccal enamel projections was significantly longer than that of lingual ones (3.1 mm vs. 0.7 mm, p < 0.01)., Conclusions: The furcation anatomy of the mandibular first molar is complex, and the presence of the DL root may further complicate its topography. A thorough understanding of these anatomic features is essential for successful periodontal treatment., (© 2024. The Author(s).)

This study employed e-Vol DXS cone beam computed tomography (CBCT) software to assess dentin remnants in the furcation area of mesial canals in mandibular molars during root canal retreatment (RCR). Four groups (Reciproc®, ProTaper Next®, Race Evo®, Protaper Gold®) were subjected to RCR, and CBCT images were captured before (T1) and after (T2) treatment. Measurements of remaining dentin thickness at 1 mm and 3 mm below the furcation were scrutinized. Results revealed no significant differences in mean thicknesses of mesiobuccal (MB) and mesiolingual (ML) canals at 1 mm and 3 mm from the furcation pre-treatment (T1). Post-treatment (T2) showed analogous findings, with no significant differences in mean thicknesses. However, disparities were found between MB and ML canals at both distances, both before and after retreatment. In essence, the evaluated instruments exhibited safety in RCR, implying that they are appropriate for use in critical areas of mandibular molars without inducing excessive wear. This study underscores the reliability of these instruments in navigating danger zones during RCR, and contributes valuable insights for dental practitioners who handle complex root canal scenarios in mandibular molars.

Aim: To investigate the root number and morphology of the maxillary second molars in the Syrian population besides bilateral symmetry, and the effect of gender., Methods: 250 Cone Beam Computed Tomography (CBCT) images (140 females, 110 males) were examined by two endodontists. The detailed analysis included the number of roots, the number of canals and their configurations, bilateral symmetry, and relation to gender. The evaluation was made according to Vertucci classification by analyzing the CBCT images at all levels (Axial, Coronal, Sagittal, Oblique, and 3D). The Chi-square statistical analysis was performed to compare the canals' morphologies and bilateral symmetry in both genders via SPSS., Result: The most common shape of the upper second molars is three roots (90.4%). There were significant differences between males and females regarding the symmetry of the number of roots (P < 0.05). The root canal configuration was mainly Vertucci type I classification in the Distobuccally (93.4%) and palatal root (99.6%). The most common type in the mesial root was type I (29.5%), showing all varieties of Vertucci classifications (except VII, and VIII) percentage of MB2 of 70.5%. The ratio of symmetry was (59.6%) with no significant statistical difference between the genders (P = 0.708)., Conclusion: Most maxillary second molars in the examined Syrian population were types (II) (associated with MB2 cases with three roots and four canals). In terms of symmetry, the number of roots surpassed the canal configuration. Males had a greater symmetrical tendency in the number of roots than females., (© 2024. The Author(s).)

Introduction: Symmetry is balance, some correspondence in the size, form, and arrangements of parts on opposite sides of a plane, line, or point. The opposite of this concept is asymmetry, or imbalance., Objective: This retrospective study compared two methods for assessing arch symmetry with linear measurements based on triangles, to determine their applicability and efficiency., Methods: Two groups were enrolled: children (n=20) and adults (n=20), and the arch symmetry was assessed from linear measurements. Method 1: the incisor-canine (INC), canine-molar (CM), and incisor-molar (INM) distances (paired t-test and Pearson correlation). Method 2: a mathematical equation between the cusps measurements of the canines and the distobuccal of the first molars leading to result 1 (t-test for one sample and bootstrapping analysis). Dental casts were digitized and analyzed using a software program. The Bland-Altman test compared the methods (α=0.05)., Results: The Bland-Altman test revealed concordance between the methods; however, separately the results were different: In method 1, the mandibular arch did not demonstrate correlation (children, INC r=0.33; CM r=0.45; INM r=0.51; adults, CM r=0.46; INM r=0.35), however, the maxilla revealed a strong correlation in children and a strong/moderate correlation in adults. In method 2, both arches were symmetrical (p>0.05)., Conclusion: Method 1 may be appropriate during orthodontic treatment, and method 2 may be indicated for final treatment. These methods are useful; however, only method 1 identified the side of asymmetry. The methods can contribute to future studies in syndromic and non-syndromic patients, before and after orthognathic surgeries and orthodontic treatment, comparing results.

Objectives: This study tests whether (1) premolar topography of extant "prosimians" (strepsirrhines and tarsiers) successfully predicts diet and (2) whether the combination of molar and premolar topography yields higher classification accuracy than using either tooth position in isolation., Materials and Methods: Dental topographic metrics (ariaDNE, relief index, and orientation patch count rotated) were calculated for 118 individual matched-pairs of mandibular fourth premolars (P 4 ) and second molars (M 2 ). The sample represents 7 families and 22 genera. Tooth variables were analyzed in isolation (P 4 only; M 2 only), together (P 4 and M 2 ), and combined (PC1 scores of bivariate principal component analyses of P 4 and M 2 for each metric). Discriminant function analyses were conducted with and without a measure of size (two-dimensional surface area)., Results: When using topography only, "prosimian" P 4 shape predicts diet with a success rate that is slightly higher than that of M 2 shape. When absolute size is included, premolars and molars perform comparably well. Including both premolar and molar topography (separately or combined) improves classification accuracy for every analysis beyond considering either in isolation. Classification accuracy is highest when premolar and molar topography and size are included., Discussion: Our findings indicate that molar teeth incompletely summarize the functional requirements of oral food breakdown for a given diet, and that the mechanism selecting for premolar form is more varied than what is expressed by molar teeth. Finally, our findings suggest that fossil P 4 s (in isolation or with the M 2 ) can be used for meaningful dietary reconstruction of extinct primates., (© 2024 The Author(s). American Journal of Biological Anthropology published by Wiley Periodicals LLC.)

Introduction: To evaluate the prevalence of single root with a single root canal and four-root configurations in the maxillary first and second molars, and analyze how geographic region, ethnicity, sex, and age impact these outcomes., Methods: Researchers from 44 nations examined 26,400 maxillary molars using cone-beam computed tomography scans to gather data on the proportions of single roots with single canals and four-root configurations. All observers underwent prior calibration regarding the step-by-step assessment protocol and anatomical concepts to ensure consistent evaluations across all assessed locations. Tests were conducted to evaluate the intraobserver and interobserver reliability. Demographic data including ethnicity, gender, and age were collected for each participant. The potential impact of imaging voxel size and field-of-view on bias was also assessed. The primary results were depicted as odds ratios and untransformed proportion forest plots with 95% confidence intervals. Additionally, a meta-analysis was performed to compare various subgroups and identify sources of variation among them. Statistical significance was set at 5%., Results: The prevalence of single-rooted with a single canal and four-rooted configurations in the maxillary first molar was 0.16% and 0.28%, respectively, while in the maxillary second molar, it was 2.56% and 0.83%. Males tended to exhibit lower percentages of single roots with a single canal (P < .05) and higher percentages of four-rooted configurations (P > .05) in the second molar, whereas the African subgroup displayed lower proportions for both configurations. Additionally, in both teeth, single roots with a single canal were more prevalent among older patients. Voxel size and field-of-view did not significantly influence the results (P > .05)., Conclusions: The proportions of single-rooted with a single canal and four-rooted configurations were low, and demographic factors such as geographic region, ethnicity, sex, and age may have influenced the outcomes for the maxillary second molar., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Objective: This paper investigates whether deciduous upper molars and lower canines have sexual dimorphic features, exploring these teeth' dimensions and the presence of Zuckerkandl's tubercle and Carabelli's cusp on the first and second upper molars., Design: We analyzed 64 pairs of dental plaster casts from 34 females and 30 males aged between 3 and 12 years. We measured the first and second deciduous upper molars and the lower deciduous canines (maximum mesiodistal and buccolingual length), and we registered the presence of the Zuckerkandl's tubercle and the Carabelli's cusp on the first and second upper molars, respectively., Results: Regarding the differentiation between sexes using Carabelli's cusp and Zuckerkandl's tubercle, the classification was not independent of Carabelli's cusp presence only for tooth 65 (p = 0.035). In all other teeth, whether for Carabelli's cusp or Zuckerkandl's tubercle, their presence was similar for both sexes. There were statistically significant differences between sexes (p < 0.05) for the buccolingual measurements of both upper second molars, the first right upper molar, and the right canine. The developed model allowed for a 64.1% accuracy in sex estimation., Conclusions: The study suggests that while Carabelli's cusp and Zuckerkandl's tubercle in upper deciduous molars don't consistently differ between sexes, tooth size, particularly the buccolingual measurements of certain teeth, including upper deciduous molars and lower canines, may provide a more reliable criterion for sex estimation. The developed model depicted moderate accuracy, underscoring the need for a multifactorial approach when estimating sex from skeletal remains. It suggests that while dental features can contribute to sex estimation, they should be used in conjunction with other skeletal or molecular markers to improve accuracy., Competing Interests: Declaration of Competing Interest The authors declare no existing conflict of interests., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background: Facial divergence during growth and development affects both the anterior and posterior alveolar bone dimensions in the maxilla and mandible, and the dentoalveolar compensation mechanism in severe vertical skeletal discrepancies remains unclear., Aims: To evaluate the: (1) difference in dentoalveolar heights among subjects with different vertical facial patterns; (2) association between the dentoalveolar bone height and other cephalometric variables; (3) effect of sex on dentoalveolar height measurements., Material and Methods: Non-growing subjects with skeletal Class I (0°

Objectives: Grotta-Riparo di Uluzzo C (Apulia, southern Italy) is a pivotal site for investigating the evolution of the Middle Paleolithic and the earliest phases of the Upper Paleolithic in southern Italy, as the extensive stratigraphic record of this site includes a thick Mousterian sequence followed by the Uluzzian. Here, we investigate the taxonomic affinity of seven unpublished deciduous human teeth retrieved from the site of Uluzzo C in 1960., Materials and Methods: The teeth are represented by seven plaster dental casts, which are housed at the Museo Civico di Paleontologia e Paletnologia in Maglie (Lecce, Apulia). The location of the original specimens remains unknown, rendering these casts the only human remains evidence yielded by Uluzzo C to date. Based on occlusal-view photographs and digital models of the casts, we examined the external morphology and morphometry of the teeth, comparing them to Homo sapiens and H. neanderthalensis samples. Through geometric morphometric methods and statistical analyses, we analyzed the crown outline of the deciduous molars., Results: The teeth show morphological and morphometric features that are variably found in H. neanderthalensis, H. sapiens, or both. Specifically, crown outline analysis shows that all molars fall within H. neanderthalensis variability, except for Uluzzo 853 (lower right deciduous first molar), which falls within H. sapiens variability., Discussion: This study provides the first taxonomic assessment of the hominin teeth from Uluzzo C. The results contribute additional insights into the Paleolithic peopling of southern Italy during a crucial period marked by the persistence of post-Tyrrhenian Neanderthal techno-complexes and the arrival of H. sapiens., (© 2024 The Author(s). American Journal of Biological Anthropology published by Wiley Periodicals LLC.)

Introduction: Understanding the intricate anatomical morphology of fused-rooted mandibular second molars (MSMs) is essential for root canal treatment. The present study utilized a deep learning approach to identify the three-dimensional root canal morphology of MSMs from two-dimensional X-ray images., Methods: A total of 271 fused-rooted MSMs were included in the study. Micro-computed tomography reconstruction images and two-dimensional X-ray projection images were obtained. The ground truth of three-dimensional root canal morphology was determined through micro-computed tomography images, which were classified into merging, symmetrical, and asymmetrical types. To amplify the X-ray image dataset, traditional augmentation techniques from the python package Augmentor and a multiangle projection method were employed. Identification of root canal morphology was conducted using the pretrained VGG19, ResNet18, ResNet50, and EfficientNet-b5 on X-ray images. The classification results from convolutional neural networks (CNNs) were then compared with those performed by endodontic residents., Results: The multiangle projection augmentation method outperformed the traditional approach in all CNNs except for EfficientNet-b5. ResNet18 combined with the multiangle projection method outperformed all other combinations, with an overall accuracy of 79.25%. In specific classifications, accuracies of 81.13%, 86.79%, and 90.57% were achieved for merging, symmetrical, and asymmetrical types, respectively. Notably, CNNs surpassed endodontic residents in classification performance; the average accuracy for endodontic residents was only 60.38% (P < .05)., Conclusions: CNNs were more effective than endodontic residents in identifying the three-dimensional root canal morphology of MSMs. The result indicates that CNNs possess the capacity to employ two-dimensional images effectively in aiding three-dimensional diagnoses., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Objective: The purpose of the study was to evaluate the proximity between the root apices of maxillary molars and maxillary sinus floor using cone-beam computed tomography (CBCT) in the southern Turkish subpopulation., Design: For the study, 246 CBCT images were analyzed. The absence of antagonist teeth was excluded. Kwak's types III and V were detailed with three divisions. Division M; the penetration of the mesial root only, Division D; the penetration of the distal root only, and Division MD; the penetration of both buccal roots. The distance between the maxillary sinus and the root apices was measured. Student's t-test, one-way ANOVA, and chi-square were used for statistical analysis., Results: The penetration of maxillary molars was 24.40%. The highest prevalence belonging to Type I. Division MD was 44.35% for Type III and 40.42% for Type V. Division M was higher than Division D. The distances between the sinus and root apices were 1.35-2.41 mm in Type I. The distance decreased with age (p < 0.05)., Conclusion: Both buccal root penetration into the sinus was higher than the single root penetration. The distance of the second molar root apices to the sinus was closer than the first molar. One-quarter of the first and second molars were inside the sinus. A greater likelihood of penetration of the root apices into the sinus with increased age., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Introduction: The aim of this study was to evaluate changes in geometry following root canal preparation using R-Motion instruments with different apical sizes and tapers., Methods: Fifty-four mesial canals of mandibular molars with single curvature of angles ranging between 20° and 30° were stratified into 3 groups according to their internal anatomy (R-Motion 25/.06, 30/.04, Reciproc Blue) (n = 18 per group). Micro-computed tomography was used to standardize the samples before instrumentation and, after instrumentation, to assess canal transportation, changes in canal volume and centering ability. Canals were irrigated with 17% EDTA and sodium hypochlorite, and the final rinse included subsonic agitation of these solutions. Measurements were analyzed automatically using the Dragonfly software (Come, Montreal, Canada) and were confirmed by a technician and an endodontist, based on a previously validated methodology. The results were analyzed using the Kruskal-Wallis's and Mann-Whitney's tests. The level of statistical significance was set at 5%., Results: Significant differences were found in the coronal third for canal transportation, with Reciproc Blue R25 having greater values compared with both R-Motion instruments (P < .05) and greater changes in volume when compared with R-Motion 30/.04 (P < .05)., Conclusions: R-Motion of apical size and taper 25/.06 and 30/.04 were associated with similar changes in geometry following root canal preparation in curved mesial canals of mandibular molars, whereas Reciproc Blue was associated with greater canal transportation in the coronal root third., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Background: The anatomical proximity between the root apex of the maxillary posterior teeth and the maxillary sinus can lead to complications, including odontogenic maxillary sinusitis. While several studies have investigated similar variables in different populations, there is limited research on the Indonesian population. This study aimed to describe the anatomical position of the maxillary posterior teeth in relation to the floor of the maxillary sinus using CT scans., Methods: A total of 122 patients (432 maxillary premolars and 1,282 maxillary molars) underwent CT scans to evaluate 1,711 roots. The vertical relationship between the root apex of the maxillary posterior teeth and the maxillary sinus was classified into three types: IS (inside sinus), CO (sinus contact), and OS (outside sinus)., Results: The IS type was predominantly found in the palatal roots of the first molars, accounting for 20% of the total roots in this type. The CO type was most frequently observed in the mesiobuccal roots of the second molars, representing 18% of the total roots in this type. The OS type was most commonly found in the first premolar, comprising 20% of the total roots in this type., Conclusions: The palatal roots of the first molars exhibited the highest frequency of proximity to the maxillary sinus. CT scans can effectively assess the relationship between the root apex of the posterior teeth and the maxillary sinus., Clinical Relevance: Clinicians should consider this information comprehensively when planning treatments for maxillary molars., (© 2024. The Author(s).)

Background: Many indices have been suggested to help orthodontists in predicting the ideal dental arch width. One of these was Pont's index which was established by Pont. He suggested equations to predict the ideal maxillary dental arch width (interpremolar and intermolar) from the combined mesiodistal width of the maxillary incisors. This study aimed to test the applicability of Pont's index as an orthodontic diagnostic tool in Egyptian population and to compare the results with those obtained from studies of different ethnic subjects., Methods: This study was performed using dental casts of 184 Egyptian individuals (82 males and 102 females; age range, 19-24 years). The casts were divided into 46 casts with normal occlusion, 46 casts with class I, 46 casts with class II and 46 casts with class III malocclusion, according to Angle's classification. Alginate impressions were taken for all patients and poured immediately using dental plaster. The real models were transformed into digital models using three-dimensional laser scanner to allow digital model analysis. Predicted arch widths were calculated using Pont's equations. The predicted values were compared to the measured values., Results: Intra class correlation coefficient (ICC) (absolute agreement) between measured and predicted arch widths was determined. Poor absolute agreement was found between measured arch width values and the corresponding values calculated according to Pont's index., Conclusion: According to the results of this study, Pont's index is not a reliable method for predicting the ideal dental arch widths in Egyptian populations., (© 2024. The Author(s).)

BACKGROUND The goal of conventional endodontic therapy is to clean the root canal system thoroughly, restore tooth function, and prevent re-infection. Success depends on understanding root canal morphology, resolving apical periodontitis, and using proper techniques. Studies highlight variations in root canal anatomy, with cone-beam computed tomography (CBCT) being crucial for accurate diagnosis despite its high cost and limited availability. MATERIAL AND METHODS This retrospective study reviewed CBCT images of 1820 (907 male, 913 female) patients aged 18 to 78 years. Analysis included 2081 mandibular first molars for variations in root and canal morphology and right- and left-side symmetry. Inter-orifice distance was measured, along with distance from the cementoenamel junction (CEJ) to the level of canal bifurcation. RESULTS In this study, 96.01% of teeth had 2 roots and 3.89% had 3 roots. The percentages of canal configuration were 77.70% for 3 canals, 21.58% for 4 canals, 0.67% for 2 canals, and 0.05% for 1 canal. The inter-orifice distance was 2.07 mm for 2 canals in 1 root and 2.86 mm for 2 canals in separate distal roots. Distance from the CEJ to canal bifurcation varied significantly between 2 canals within 1 distal root (3.35 mm), 2 canals in separate distal roots (1.60 mm), as well as between distal (3.35 mm) and mesial roots (1.10 mm). CONCLUSIONS In mandibular first molars, only 3.89% have additional distolingual roots. Sex and ethnicity showed no influence on number of roots and canals. Distal canals showed a deeper bifurcation and greater inter-orifice distance than did mesial canals.

Chip scars in fossil teeth are a lasting evidence that bears on human evolution. Chip dimensions in posterior teeth of hominins, apes and white-lipped peccary (Tayassu pecari) are measured from published occlusal images. The results are plotted as D/D m vs. h/D m , where h, D and D m denote indent distance, chip width and mean tooth crown diameter. The hominin species follow a similar pattern where D/D m monotonically increases up to h/D m  ≈ 0.3. The behavior for the apes is characterized by two phases. In the first, h/D m monotonically increases up to h/D m  ≈ 0.26 while in the second (h/D m  ≈ 0.26 to 0.42), D/D m experiences a drastic change in behavior. The interpretation of chip morphology is assisted by results from controlled spherical indentation tests on extracted human molars. This study shows that in addition to the commonly recognized chipping due to cusp loading, a chip may also initiate from the inner wall of the tooth's central fossa. Accordingly, it is suggested that the chipping in hominins generally initiates from a (worn) cusp while that in apes involves cusp loading up to h/D m  ≈ 0.26 and fossa loading thereafter. The behavior for T. pecari is much similar to that of the apes. The fossa chipping is facilitated by a consumption of hard, large-size diet (e.g., plants, roots, barks and nuts) and presence of broad central fossa, conditions that are met in apes. Finally, a simple expression for the critical chipping force P ch due to fossa loading is developed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Objectives: This study aimed to investigate the relationship between the aspect ratios of mandibular molar roots at the apical 3-mm level and their root canal complexity., Design: This study used micro-CT imaging to analyze 163 two-rooted mandibular molars. The aspect ratios of the roots at the apical 3-mm level were categorized as "< 2.75" or "≥ 2.75" (mesial) and "< 1.75" or "≥ 1.75" (distal). A two-dimensional (2D) analysis focused on four apical axial cross-section levels to determine the presence of main and accessory canals and isthmus. Additionally, a three-dimensional (3D) assessment of the apical 4-mm of both roots examined main and accessory canals, apical foramina, apical deltas, and middle mesial canals., Results: Mesial roots with aspect ratios ≥ 2.75 showed a higher number of main canals at all levels compared to those with aspect ratios < 2.75 at the 3-mm level. Additionally, the ≥ 2.75 group exhibited more accessory canals and a higher average number of accessory canals. The 3D assessment confirmed significantly more accessory canals and apical foramina in the ≥ 2.75 group. The prevalence of roots with apical deltas was nearly double in the ≥ 2.75 group, and middle mesial canals were exclusively found in this group. In the distal root, the ≥ 1.75 group showed a significantly higher number of main canals at all axial levels. No significant differences were observed between groups in terms of accessory canals, apical foramina, or deltas., Conclusions: A higher root aspect ratio is related to higher anatomical complexity., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Objectives: This study presents biological affinities between the last hunter-fisher-gatherers and first food-producing societies from the Nile Valley. We investigate odontometric and dental tissue proportion changes between these populations from the Middle Nile Valley and acknowledge the biological processes behind them., Materials and Methods: Dental remains of 329 individuals from Nubia and Central Sudan that date from the Late Pleistocene to the mid-Holocene are studied. Using 3D imaging techniques, we investigated outer and inner metric aspects of upper central incisors, and first and second upper molars., Results: Late Paleolithic and Mesolithic foragers display homogeneous crown dimensions, dental tissue proportions, and enamel thickness distribution. This contrasts with Neolithic trends for significant differences from earlier samples on inner and outer aspects. Finally, within the Neolithic sample differences are found between Nubian and Central Sudanese sites., Discussion: Substantial dental variation appears to have occurred around 6000 bce in the Nile Valley, coinciding with the emergence of food-producing societies in the region. Archeological and biological records suggest little differences in dietary habits and dental health during this transition. Furthermore, the substantial variations identified here would have happened in an extremely short time, a few centuries at most. This does not support in situ diet-related adaptation. Rather, we suggest these data are consistent with some level of population discontinuity between the Mesolithic and Neolithic samples considered here. Complex settlement processes could also explain the differences between Nubia and Central Sudan, and with previous results based on nonmetric traits., (© 2024 The Authors. American Journal of Biological Anthropology published by Wiley Periodicals LLC.)

This study investigated the root canal morphology of fused-rooted mandibular second molars based on the pulp chamber floor (PCF) and analysed the correlation between the external morphology of the radicular groove, and the internal morphology of the PCF and root canal configuration. A total of 291 fused-rooted teeth collected from the Chinese population were scanned using micro-computed tomography and a dental operating microscope was used for observing the PCFs. The classification of the PCF and root canal configuration were identified according to modified Min et al.'s and Gao et al.'s classifications, respectively. Additionally, a new radicular groove classification was proposed. The correlation among these morphological characteristics was investigated using the chi-square test and Fisher's exact test (p < 0.05). The results showed that 74.2% of teeth had C-shaped PCFs, while 21.0% had non-C-shaped PCFs. As for the root canal configurations, 37.5% of teeth were merging type, 40.9% were symmetrical type, and 14.8% were asymmetrical type. Statistical analysis revealed a significant correlation between the PCF types and the root canal configurations (p < 0.001). The dominant root canal types for teeth with C-shaped PCFs were merging and symmetrical types, while the asymmetrical type was not identified in non-C-shaped PCFs. In addition, significant morphological association between the root canals and radicular grooves was also revealed (p < 0.001). Teeth with different PCF morphologies exhibit specific patterns of root canal category distribution. Understanding the morphological nuances of the root canal based on the PCF can assist clinicians in predicting and identifying the canal configuration beneath the visible orifice., (© 2024 Australian Society of Endodontology Inc.)

Background: This study quantitatively analyzed the anatomic structure of the alveolar bone in the maxillary molar region at three potential locations for Temporary Anchorage Device (TAD) placement. Additionally, the study compared the variability in this region across different age groups, sagittal skeletal patterns, vertical facial types, and sexes., Methods: In this retrospective cone-beam computed tomography study, the buccal alveolar bone was analyzed in the posterior molar area of 200 patients, the measurement items include buccal alveolar bone height, alveolar bone thickness, interradicular distance, and maxillary retromolar space., Results: Buccal alveolar height was greatest in the U56 region. The interradicular space was largest in the U56 region and increased from the alveolar crest to the sinus floor. Buccal alveolar bone thickness was highest in the U67 region and generally increased from the alveolar crest to the sinus floor. The maxillary retromolar space gradually increased from the alveolar crest to the root apex., Conclusions: TADs are safest when placed in the buccal area between the maxillary second premolar and the first molar, particularly at the 9 mm plane. The U67 region is the optimal safe zone for TAD placement for maxillary dentition distalization. TADs placement in adolescents can be challenging. Maxillary third molar extraction can be considered for maxillary dentition distalization., (© 2024. The Author(s).)

Purpose: This study was conducted to investigate the root canal anatomy of maxillary first molars in Black South Africans., Methods: Micro-computed tomography was used to investigate 101 maxillary first molars (53 teeth from the right, 48 from the left; 50 male and 51 female teeth). The number of root canals in each tooth was determined, and the relationship between side, sex and age was analyzed using chi-squared test. To determine intra- and inter-observer reliability, Cohen's kappa coefficients were calculated., Results: Intra- and inter-rater agreements of 96.92% and 98.08% were achieved, respectively. Most teeth contained either three or four canals, but a second, third and fourth mesio-buccal canal was found in 60.39%, 5.94% and 0.99% of teeth, respectively. The disto-buccal and palatal roots contained predominantly single canals, but additional canals were noted in 2.97% and 1.98% of teeth. Four canals were common in females and teeth on the right side often contained a second mesio-buccal canal. However, the prevalence of a third mesio-buccal canal was higher in males than in females., Conclusion: The teeth studied showed diversity and variations between sexes and arch sides. These findings will aid clinicians in endodontic treatment and will be applicable for educational purposes.

Purpose: Although gingival thickness has been extensively studied in permanent dentition, the literature regarding marginal gingival thickness in primary dentition is insufficient. The purpose of this study was to assess the variations in marginal gingival thickness in preschool-age children. Methods: A cross-sectional study of 4,109 primary teeth was conducted. Using a reamer, the transgingival probing method was employed to assess marginal gingival thickness in healthy preschoolers. Inter-examiner and intra-examiner reproducibility were assessed via the intraclass correlation coefficient. Results: Descriptive statistics revealed that primary maxillary left second molars had the highest mean marginal gingival thickness (1.06 mm), whereas primary mandibular right central incisors had the lowest mean marginal gingival thickness (0.74 mm). Gender-based independent sample t-tests revealed significant differences in the values of primary maxillary right canines (females had greater values than males; P=0.03) and primary mandibular right first molars (males had greater values than females; P=0.01). An inter-arch comparison revealed significant differences between the primary second molars (maxillary more than mandibular; P=0.001). Conclusions: This study reports the first documented marginal gingival thicknesses of primary dentition. It reveals substantial variations in the values of primary maxillary right canines and primary mandibular right first molars and between primary maxillary and mandibular second molars.

Objective: This descriptive observational study aimed to determine clinically relevant and applicable data of enamel thickness (ETH), considering the mesio-distal differences of anterior and posterior permanent teeth and their relationships., Material and Methods: The sample consisted of right-sided standardized radiographs of 34 individuals (21 females and 13 males), aged between 13 and 24 (average 16) years, with all permanent teeth intact and without crowding. Four periapical and four interproximal radiographs were obtained and digitized. ETH measurements (mesial to distal contact points at the dentin-enamel junction) were performed after correction for radiographic image magnification. The Students' t-test was applied to the differences between paired means, with the Pearson correlation to evaluate the correlation between them., Results: The mesial and distal ETH increased from the anterior to the posterior teeth. Incisor ETH ranged between 0.60 and 0.84 mm. Canines, premolars, and molars were more than 1.0 mm thick, and molar enamel reached values between 1.26 and 1.44 mm., Conclusion: Distal ETH was significantly greater than the mesial ETH, and progressively thicker from the anterior to posterior teeth. Interproximal reduction (IPR) of the lower central and upper lateral incisors should be avoided, reduced, or performed on their distal surfaces. There is a positive and significant correlation between ETH and the mesial and distal surfaces of the teeth. Periapical radiographs and evaluation of the remaining ETH are necessary in cases of retreatment. The location and number of tooth size discrepancies should be considered in treatment planning and appropriately compensated with IPR.

This study aimed to characterize the anatomical and physiological features of pits and fissures in primary and permanent molars by microtomographic (micro-CT) examination and three-dimensional (3D) printing. The occlusal surfaces of 84 primary molars and 60 permanent third molars were examined. The samples were scanned with micro-CT and the occlusal surface separated. The areas of the crown, its occlusal part, and fissures and pits were calculated. Digital impression of the occlusal surface was created and 3D printed. The frequency of different fissure types was determined by direct observation. Data were subjected to statistical analysis using Mann-Whitney U Test and chi-square test ( p < 0.05). There was statistically significant difference between the ratio of occlusal surface and the crown area for the molars in primary and permanent dentitions (24.78% and 28.85% respectively, p < 0.05). In terms of the percentage ratio of the fissure area to the occlusal surface (24.24% and 22.30%) and the fissure area to the crown (6.02% and 6.52%), no significant difference was observed ( p > 0.05). V-shaped fissures were predominant in both primary and permanent teeth, with a higher occurrence in primary dentition (59.48%, p < 0.05). Permanent molars exhibited a higher prevalence of I-type and U-type fissure configurations compared to primary molars ( p < 0.05), with I-type fissures being the least common in primary molars. In both dentitions there was no statistically significant difference in the prevalence of IK-configuration ( p > 0.05). The fissure depth was significantly greater in permanent molars than primary molars ( p < 0.05). In conclusion, this study revealed remarkable diversity in fissure morphology among primary and permanent molars., Competing Interests: The authors declare no conflict of interest., (©2024 The Author(s). Published by MRE Press.)

Objective: The patterning cascade model of crown morphogenesis has been studied extensively in a variety of organisms to elucidate the evolutionary history surrounding postcanine tooth form. The current research is the first to use a large modern human sample to examine whether the crown configuration of lower deciduous and permanent molars aligns with expectations derived from the model. This study has two main goals: 1) to determine if metameric and antimeric pairs significantly differ in size, accessory trait expression, and relative intercusp spacing, and 2) assess whether the relative distance among early-forming cusps accounts for observed variation in accessory cusp expression., Methods: Tooth size, intercusp distance, and morphological trait expression data were collected from 3D scans of mandibular dental casts representing participants of the Harvard Solomon Islands Project. Paired tests were utilized to compare tooth size, accessory trait expression, and relative intercusp distance between diphyodont metameres and permanent antimeres. Proportional odds logistic regression was implemented to investigate how the odds of greater accessory cusp expression vary as a function of the distance between early-developing cusps., Results/significance: Comparing paired molars, significant differences were identified for tooth size and cusp 5 expression. Several relative intercusp distances emerged as important predictors of cusp 6 expression, however, results for cusp 5 and cusp 7 did not match expected patterns. These findings support previous quantitative genetic results and suggest the development of neighboring crown structures represents a zero-sum partitioning of cellular territory and resources. As such, this study contributes to a better understanding of the foundations of deciduous and permanent molar crown variation in humans., Competing Interests: The authors have declared no competing interests exist., (Copyright: © 2024 Kenessey et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Understanding how epigenetic factors impact dental phenotypes can help refine the use of teeth for elucidating biological relationships among human populations. We explored relationships among crown size, principal cusp spacing, and accessory cusp expression in maxillary dental casts of nutritionally supplemented (n = 34) and non-supplemented (n = 39) individuals from Tezonteopan, Mexico. We hypothesized that the non-supplemented group would exhibit smaller molar crowns and reduced intercusp spacing. Since intercusp spacing is thought to be more sensitive to epigenetic influences than crown size, we predicted that the supplemented and non-supplemented groups would differ more in the former than the latter. Previous work suggests that molar accessory cusp expression may be elevated under conditions of stress. We therefore expected evidence of greater Carabelli and Cusp 5 trait expression in the non-supplemented group. We further hypothesized that anterior teeth would be affected by nutritional stress during development, with the non-supplemented group having smaller anterior tooth crowns and therefore limited space to form the tuberculum dentale. Finally, we tested whether the presence of molar accessory traits followed predictions of the Patterning Cascade Model of tooth morphogenesis in the entire sample. Our results supported the expectation that cusp spacing would differ more than molar crown size between the two groups. Carabelli trait showed little evidence of frequency differences between groups, but some evidence of greater trait scores in the non-supplemented group. The non-supplemented group also showed evidence of greater Cusp 5 frequency and expression. In the central incisors and canines, there was strong evidence for smaller crown sizes and reduced tuberculum dentale frequency in the non-supplemented group. With both groups pooled together, there was strong evidence of closer mesiodistal distances among principal cusps in molars with accessory cusps, a finding that is consistent with the PCM. Overall, our findings suggest that nutritional stress may affect accessory cusp expression., Competing Interests: The authors have declared no competing interests exist., (Copyright: © 2024 Blankenship-Sefczek et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Purpose: This study aimed to measure and analyze the transverse indicators of normodivergent patients with different sagittal skeletal malocclusions, to explore the transverse characteristics of different sagittal skeletal malocclusions., Methods: Lateral cephalograms and CBCT of 90 normodivergent patients with skeletal Class Ⅰ, Ⅱ and Ⅲ in their permanent dentition were collected. Dolphin software was applied to measure the widths of the basal bone, alveolar bone, dental arch and buccolingual inclination angle of the corresponding teeth in the maxillary and mandibular canine, premolar and molar areas. SPSS 22.0 software package was applied for statistical analysis of the data., Results: The widths of the mandibular basal bone in canine, premolar and molar areas of skeletal Class Ⅲ were (27.15±2.74), (39.30±2.82) and (59.97±2.93) mm, respectively. The widths of the mandibular alveolar bone of skeletal Class Ⅲ were (25.38±1.78), (34.51±2.28) and (47.72±2.73) mm, respectively. The dental arch widths of the maxillary premolar and mandibular canine areas of skeletal Class Ⅲ were (48.70±2.35) and (30.69±2.31)mm, respectively. The above data of skeletal Class Ⅲ were significantly larger than those of skeletal Class Ⅰ and Ⅱ(P＜0.01). The dental arch widths of the maxillary canine, maxillary molar and mandibular molar areas of skeletal Class Ⅲ were (38.88±1.90), (59.51±3.40) and (56.01±2.86)mm, respectively, which were significantly larger than those of skeletal Class Ⅱ(P＜0.05). The maxillomandibular width difference of basal bone in the canine, premolar and molar areas of skeletal Class Ⅲ were (4.69±2.84), (2.31±2.39) and (3.27±2.05) mm, respectively, which were significantly less than that of skeletal Class Ⅰ and Ⅱ(P＜0.01). Compared with skeletal Class Ⅰ, the maxillary canines and first molars of skeletal Class Ⅱ had larger lingual inclination level, while the maxillary first premolars and first molars of skeletal Class Ⅲ had larger buccal inclination level, the mandibular canines and the mandibular first premolars of skeletal Class Ⅲ had larger lingual inclination level(P＜0.01)., Conclusions: For normodivergent patients, the width of the mandibular base bone, alveolar bone, and maxillary and mandibular dental arch in skeletal Class Ⅲ is the widest, which is more likely to have width discrepancy in basal bone. In skeletal Class Ⅲ, the maxillary teeth are buccally inclined, and the mandibular teeth are ingually inclined. In skeletal Class Ⅱ, the maxillary teeth are lingually inclined, and the mandibular teeth are compensatory upright.

Objectives: This retrospective study explored the incidence of independent distal-lingual root (DLR) in mandibular first molars and the morphologic features of distal furcations through cone beam computed tomography (CBCT) in Beijing population., Methods: A total of 401 CBCT images of both mandibular first molars existed were included. The sex of the patients, the incidence of DLR, the distal root trunk length (DRT), the locations of distal furcation entrance (DFE), and the separation angle of distal furcation (ADF) were recorded., Results: The incidence rates of DLR were 33.2% on the subject level and 26.8% on the tooth level. The incidence of DLR was not different between genders but was higher on the right sides. The DRT values were 4.15 mm±1.02 mm. The ADF was 65.56°±11.56°. The DFE was located lingually, and 97.2% DFE was located more apically than buccal/lingual furcations., Conclusions: A high incidence of DLR was found in the Beijing population. The DRT was longer than buccal and lingual sites. The DFE was located lingually with a wide separation. Understanding the morphological features of distal furcation can help clinicians to make proper treatment plans.

In this study, we aimed to compare the cusp and crown areas of the maxillary first premolar (PM1), second premolar (PM2), and first molar (M1) in males and females in the Malay population and to formulate sex prediction models. For this purpose, the maxillary posterior teeth of 176 dental cast samples (from 88 males and 88 females) were selected and transformed to two-dimensional digital models using 2D-Hirox KH-7700. Cusp and crown area measurements were obtained using Hirox software by tracing the outermost circumference of the tooth cusps. Statistical analysis included independent t-tests, logistic regression analysis, and receiver-operating characteristic (ROC) curves as well as determination of sensitivity and specificity; analysis was performed with SPSS version 26.0. The significance threshold was set at 0.05. All crown and cusp area measurements were significantly larger in males than in females (p < 0.001). The most sexually dimorphic tooth was the first maxillary molar (mean difference, 10.27 mm 2 ), and the most sexually dimorphic cusp was the mesiopalatal cusp (mean difference, 3.67 mm 2 ) of M1. The sex prediction model had a good accuracy, with 80% of selected cases correctly predicted. Hence, we conclude that the maxillary posterior teeth in the Malay population exhibit significant sexual dimorphism, and this information may be used for sex determination as adjuvants along with other procedures., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Background: Human sexual dimorphism is associated with many biological characteristics, including dental variables., Objectives: To investigate if molars fused roots present sex-associated differences., Methods: Panoramic radiographs were used to investigate the frequency and distribution of permanent molars fused roots. Only patients with all first and second permanent molars were included. Third molars were not investigated. Any molar with roots fused apical to the usual furcal position were considered molar fused roots. Comparisons between males and females were performed using chi-square or Fisher's and Mann-Whitney tests and the established alpha was 5% (p<0.05). Sex-differential liability models were also proposed., Results: A total of 84 males and 86 females were included and 1360 molars were analyzed. Among them, 46 (26.06%) present at least one molar with fused root. Second maxillary molars were the most affected teeth. There was an association between sex and molars with fused roots. Females had a 3.4 higher chance to present fused roots than males (OR=3.4, CI 95% 1.6-6.8; p=0.0008). The female: male ratio of molars with fused roots was 2.5:1. The number of molars with fused roots ranged from 1 to 6 per patient, and the mean number of Females presented more molars with fused roots (mean = 1.01; standard deviation = 1.52) than males (mean = 0.31; standard deviation = 0.85) (p<0.05)., Conclusions: Molar fused root of permanent teeth presents sex-associated differences, in which females are more affected than males. Our results support sex-differential liability models for molars fused roots., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier GmbH.. All rights reserved.)

This study aimed to compare the quality of root canal obturation (ratio of area occupied by gutta-percha (G), sealer (S), and presence of voids (V)) in different anatomical irregularities (intercanal communications, lateral irregularities, and accessory canals) located at different thirds of the root canal system of mandibular molar replicas. Sixty-seven 3D printed replicas of an accessed mandibular molar were prepared using ProGlider and ProTaper Gold rotatory systems. Three specimens were randomly selected to be used as controls and did not receive further treatment. The rest were randomly distributed in 4 experimental groups to be obturated using either cold lateral compaction (LC), continuous wave of condensation (CW), and core-carrier obturation (ThermafilPlus (TH) or GuttaCore (GC)) (n=16 per group). AHPlus® sealer was used in all groups. The three controls and a specimen from each experimental group were scanned using micro-computed tomography. The rest of the replicas were sectioned at the sites of anatomical irregularities and examined at 30× magnification. The G, S, and V ratios were calculated dividing the area occupied with each element by the total root canal area and then compared among groups using the Kruskal-Wallis test. Voids were present in all obturation techniques with ratios from 0.01 to 0.15. CW obtained a significantly higher G ratio in the irregularity located in the coronal third (0.882) than LC (0.681), TH (0.773), and GC (0.801) (p<0.05). TH and GC achieved significantly higher G ratios in those located in the apical third (p<0.05). The worst quality of obturation was observed in the loop accessory canal with all obturation techniques. Whitin the limitations of this study, it can be concluded that CW and core-carrier obturation are respectively the most effective techniques for obturating anatomical irregularities located in the coronal and the apical third.

Background: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT)., Methods: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age., Results: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05)., Conclusions: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes., (© 2024. The Author(s).)

Dogs are animals with strong bite force. This strong bite mechanism has led to significant changes in the skeletal system such as fossa masseterica. It can be thought that one side is used more than the other side in chewing and is related to the preference of using the same side's hand, eye and foot. In the study, directional asymmetry and fluctuating asymmetry, which occurs as a result of chewing asymmetry, were examined on the first molar teeth and the fossa masseterica in 85 dog mandibles including a wide diversity of morphotypes. The association of high PC1 values for directional asymmetry with a pronounced cranial index, as evident in breeds like Pekingese, Pomeranian and Bulldog, indicates a potential evolutionary or selective breeding trend favouring brachycephaly. On the contrary, guardian breeds like the German shepherd and Bernese mountain dog, which typically require strong jaws for their roles, showcased reduced PC1 values, which might be related to their functional morphology. Similarly, the PCA results for the first molar teeth shape variations also highlighted the influence of cranial shape, with boxer dogs displaying notably higher PC1 values. The fluctuating asymmetrical distributions provided valuable insights into individualistic variations. Interestingly, no specific breed distribution trend was observed for these asymmetries, indicating a more individual-based variation rather than breed-based. It is essential to note that while these results provide valuable insights, further studies are required to understand the underlying causes better. Factors like genetic variations, developmental processes, dietary habits and external environmental factors could play pivotal roles in these observed morphological differences., (© 2024 Wiley‐VCH GmbH. Published by John Wiley & Sons Ltd.)

Introduction: The purposes of this study were to evaluate the effect of the combined use of object detection for the classification of the C-shaped canal anatomy of the mandibular second molar in panoramic radiographs and to perform an external validation on a multicenter dataset., Methods: The panoramic radiographs of 805 patients were collected from 4 institutes across two countries. The CBCT data of the same patients were used as "Ground-truth". Five datasets were generated: one for training and validation, and 4 as external validation datasets. Workflow 1 used manual cropping to prepare the image patches of mandibular second molars, and then classification was performed using EfficientNet. Workflow 2 used two combined methods with a preceding object detection (YOLOv7) performed for automated image patch formation, followed by classification using EfficientNet. Workflow 3 directly classified the root canal anatomy from the panoramic radiographs using the YOLOv7 prediction outcomes. The classification performance of the 3 workflows was evaluated and compared across 4 external validation datasets., Results: For Workflows 1, 2, and 3, the area under the receiver operating characteristic curve (AUC) values were 0.863, 0.861, and 0.876, respectively, for the AGU dataset; 0.935, 0.945, and 0.863, respectively, for the ASU dataset; 0.854, 0.857, and 0.849, respectively, for the ODU dataset; and 0.821, 0.797, and 0.831, respectively, for the ODU low-resolution dataset. No significant differences existed between the AUC values of Workflows 1, 2, and 3 across the 4 datasets., Conclusions: The deep learning systems of the 3 workflows achieved significant accuracy in predicting the C-shaped canal in mandibular second molars across all test datasets., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: Natural teeth and dental restorations present with various shades and levels of translucency. This study aimed to determine whether these variations in ceramic crowns and scan powder application affect the trueness of intraoral scanners., Methods: Eight identical premade resin typodonts, each prepared for a crown on the maxillary right second molar, were used. Eight lithium disilicate crowns, distinguished by two levels of translucency (high and low) and four shades (BL1, A2, A3, and A4), were fabricated to an identical design and cemented onto each typodont, providing eight distinct experimental groups (2 levels of translucency × 4 shades). Reference scans were acquired using a desktop scanner. Test scans were performed ten times for each experimental group using two different intraoral scanners (Medit i700 and CEREC Primescan AC), with and without the application of scan powder (n = 10). Three-dimensional metrology software was used to assess the trueness of the intraoral scan datasets. Statistical analysis involved the Kruskal-Wallis H test, Mann-Whitney U test, and independent t-test (α=0.05)., Results: For powder-free intraoral scan datasets, the crown shade did not significantly affect trueness within each translucency group (P = 1.000). For both intraoral scanners, compared with low translucency groups, higher marked deviations were exhibited by high translucency groups (P<.001). Scan powder use largely mitigated these differences (P>.05) and enhanced the trueness of the intraoral scan (P<.01)., Conclusions: Shade did not significantly influence the trueness of intraoral scans. High-translucency crowns were scanned with less accuracy than were low-translucency crowns., Clinical Significance: Unlike tooth shade, translucency significantly affected the accuracy of intraoral scans. Therefore, considering the use of scan powder when scanning objects with high translucency may be beneficial., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

As an auxiliary method in the process of human identification, forensic facial approximation (FFA) is an important tool for identifying unknown human bodies whose remains do not present the necessary traceability to any antemortem data collection. Specific characteristics are necessary when addressing children aged between 6 and 10 years, who have little sexual differentiation and a mixed dentition. Due to the chronology of eruption of the permanent second molars in this population, it is not possible to measure facial soft-tissue thickness (FSTT) from specific landmarks such as supra and infra M2. The objective of this research was to report the method for measuring the average FSTT of 32 landmarks adapting the method for adults replacing the landmarks at the upper and lower second molars (Supra M2 and Infra M2) in children up to 10 years of age for a measurement using the deciduous second molars as reference. We found statistical differences for some points, considering the variables of age and sex, but with a maximum difference of 2 mm, which allows the use of a single FSTT table. The deciduous teeth can replace the reference of the thicknesses at the supra and infra M2 landmarks. In addition to the new FSTT data for children in Brazil, we concluded that the proposed adaptation to the deciduous M2 points can be applied to obtain soft-tissue data for 32 facial points., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved.Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn't allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth., (© 2024. The Author(s).)

Knowledge of root canal internal anatomy and its variations is important forproper endodontic treatment. It is therefore necessary to investigate morphological aspects among different dental groups in the same patient to define the best protocol for the case., Aim: To evaluate the morphology and symmetry of homologous incisors, premolars and mandibular molars using cone beam computed tomography (CBCT)., Materials and Method: Descriptive statistical analysis was performed for the frequency of categorical variables, and a chi-square test or Fisher 's exact test was used to test whether gender and side were associated with number of roots, number of canals, and Vertucci's classification. Forty-five CBCT scans were evaluated, and 444 mandibular teeth were analyzed. The number of roots, number of canals, classification of the canals in each root according to Vertucci and presence of a symmetrical relationship between pairs of posterior teeth were analyzed., Results: The resuls showed that 74% of mandibular central incisors had type I root canal, 26% of mandibular lateral incisors had type I and, with a significant difference in the number of canals between males and females (p < 0.05). In mandibular first premolars, 70.5% had type I; and in mandibular second premolars, 98.5% had type I. Mandibular first molars had two roots in 98% of the cases. Second mandibular molars had two roots in 92.5% of the cases, one root in 6%, and three roots in 1.5%. Symmetry between central incisors was higher in females than in males., Conclusión: Teeth of the same group can have different morphologies in the same patient., Competing Interests: The authors declare no potential conflicts of interest regarding the research, authorship, and/or publication of this article., (Copyright© 2024 Sociedad Argentina de Investigación Odontológica.)

Shuotheriids are Jurassic mammaliaforms that possess pseudotribosphenic teeth in which a pseudotalonid is anterior to the trigonid in the lower molar, contrasting with the tribosphenic pattern of therian mammals (placentals, marsupials and kin) in which the talonid is posterior to the trigonid 1-4 . The origin of the pseudotribosphenic teeth remains unclear, obscuring our perception of shuotheriid affinities and the early evolution of mammaliaforms 1,5-9 . Here we report a new Jurassic shuotheriid represented by two skeletal specimens. Their complete pseudotribosphenic dentitions allow reidentification of dental structures using serial homology and the tooth occlusal relationship. Contrary to the conventional view 1,2,6,10,11 , our findings show that dental structures of shuotheriids can be homologized to those of docodontans and partly support homologous statements for some dental structures between docodontans and other mammaliaforms 6,12 . The phylogenetic analysis based on new evidence removes shuotheriids from the tribosphenic ausktribosphenids (including monotremes) and clusters them with docodontans to form a new clade, Docodontiformes, that is characterized by pseudotribosphenic features. In the phylogeny, docodontiforms and 'holotherians' (Kuehneotherium, monotremes and therians) 13 evolve independently from a Morganucodon-like ancestor with triconodont molars by labio-lingual widening their posterior teeth for more efficient food processing. The pseudotribosphenic pattern passed a cusp semitriangulation stage 9 , whereas the tribosphenic pattern and its precursor went through a stage of cusp triangulation. The two different processes resulted in complex tooth structures and occlusal patterns that elucidate the earliest diversification of mammaliaforms., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

This experimental anatomic study aimed to investigate the correlations between the mesio-vestibular canal (MB1) and the second mesio-vestibular canal (MB2) of the mesio-vestibular root of the upper sexts using cone-beam computed tomography (CBCT) imaging. A total of 24 extracted maxillary first molars were collected and subjected to CBCT imaging. The presence, location, and morphology of MB1 and MB2 canals were evaluated using axial, coronal, and sagittal CBCT sections. The interrelation between MB1 and MB2 canals was assessed, including their separate canals, merging, and division points. Among the 24 maxillary first molars examined, 86.5% demonstrated the presence of an MB2 canal in addition to MB1. The MB2 and MB1 were confluent in 80% of the cases with a confluent height of 4,16 mm. The mean distance between MB1 and MB2 canals was 1.85 mm. This study provides detailed information on the anatomic correlations between MB1 and MB2 canals of the mesio-vestibular root in the upper sexts using CBCT imaging. The high prevalence of MB2 canals suggests their significance in endodontic procedures and emphasizes the importance of thorough exploration and identification during root canal treatment. The knowledge of the location and morphology of these canals can aid in successful endodontic therapy and enhance treatment outcomes., Competing Interests: The authors report no conflicts of interest., (Copyright © 2024 by Mutaz B. Habal, MD.)

Purpose/objectives: Tooth carvings are evaluated subjectively. However, subjective evaluations are associated with low intra- and inter-evaluator reliability in providing feedback for the fabrication of better tooth carvings. Therefore, this study aimed to analyze the relationship between subjective evaluation and the morphological characteristics of tooth carvings and their morphological characteristics using the feedback method in the low-scoring group., Methods: Between April 2013 and September 2021, 120 maxillary left first molar carvings fabricated by undergraduate students were subjectively evaluated by an experienced instructor using a five-point scale. The tooth carvings were scanned to obtain three-dimensional shape data and divided into two groups, the high- and low-scoring groups, for principal component analysis. Homologous models with dimensions matching those of the average model were created, and principal component analysis was performed to evaluate the morphological characteristics of the tooth., Results: Principal component analysis indicated that an objective evaluation was possible using homologous model. On increasing the subjective evaluation, the occlusal inclination angle and the cervical region of the tooth became steeper, and the shape of the occlusal surface resembled a parallelogram. In addition, large morphological differences were observed in the position of the cervical region of the tooth, height of contour, and shape of the occlusal surface in the low-scoring group, whereas no such difference was observed in the high-scoring group., Conclusion: Objective evaluation of tooth carving was possible using homologous model. The evaluation of tooth morphological characteristics could be effective in providing feedback to undergraduate students., (© 2023 American Dental Education Association.)

Since the initial discovery of Paranthropus robustus at the site of Kromdraai in 1938, the hypodigm of this species has been expanded by subsequent work at the localities of Swartkrans and Drimolen, with a few fossils also known from Cooper's D, Gondolin and Sterkfontein Member 5. Beginning in 2014, systematic excavations at Kromdraai uncovered a large and previously unknown fossiliferous area, shedding light on Units O and P in the earliest part of the site's stratigraphic sequence. The aim of this paper is to provide detailed descriptions and illustrations of 30 P. robustus craniodental specimens recovered between 2014 and 2017 within the Unit P deposits at Kromdraai. This new sample predates all prior conspecific specimens found at this site (including the holotype of P. robustus from Kromdraai, TM 1517). Its basic dental morphology dimensions and cranial features are compared in a preliminary analysis with other P. robustus samples. The P. robustus sample from Kromdraai Unit P documents previously unknown portions of the P. robustus juvenile cranium. The new dental and cranial remains aid in the exploration of potential morphological distinctions between site-specific P. robustus samples and are compared favorably in size and morphology with the small P. robustus specimens from Drimolen (e.g., DNH 7). These findings do not support the hypothesis that the specimens from Drimolen belong to a different taxonomic group. Instead, they reinforce the presence of a significant degree of sexual dimorphism within P. robustus. The Kromdraai Unit P specimens also contribute to the biodemographic profile of P. robustus. The notable prevalence of infants (i.e., juvenile individuals before the emergence of their first permanent molars) mirrors the natural mortality profiles observed in wild chimpanzees. This suggests a closer resemblance in the processes of accumulation in Kromdraai Unit P and Drimolen than at Swartkrans., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)