Search

This paper presents the results of the thermal, mechanical and dielectric measurements conducted on polymer nanocomposites consisting of epoxy and polyhedral oligomeric silsesquioxane (POSS). The material composites were analyzed with a scanning electron microscope (SEM), an atomic force microscope (AFM) and a transmission electron microscope (TEM). Glass transition temperatures of the composites were measured with differential scanning calorimeter (DSC). Stress, strain, modulus and impact strength of epoxy nanocomposites were tested. Ac and lightning impulse (LI) breakdown strength of the composites were measured. Relative permittivity, loss factor and volume resistivity measurements were also conducted on the material samples. Two types of POSS, glycidyl and octaglycidyldimethylsilyl, were used in different quantities. Statistical analysis was applied to the measurement results to determine the effects of the additive type and amount on the properties of epoxy. The paper discusses the possibilities and restrictions in order to achieve advantages in high voltage applications using polyhedral oligomeric silsesquioxanes. Index Terms--Epoxy, polyhedral oligomeric silsesquioxane, thermal, mechanical and dielectric properties.

Vitamin B 12 (cyano- or hydroxo-cobalamin) acts, via its coenzymes, methyl- and adenosyl-cobalamin, as a partner for enzymatic reactions in humans catalysed by methionine synthase and methylmalonyl-CoA mutase. As well as its association with pernicious anaemia, human B 12 deficiency may also be a risk factor for neurological illnesses, heart disease and cancer. In the present work the effect of vitamin B 12 (hydroxocobalamin) on the formation of DNA adducts by the epoxide phenyloxirane (styrene oxide), a genotoxic metabolite of phenylethene (styrene), has been studied using an in vitro model system. Styrene was converted to its major metabolite styrene oxide as a mixture of enantiomers using a microsomal fraction from the livers of Sprague-Dawley rats with concomitant inhibition of epoxide hydrolase. However, microsomal oxidation of styrene in the presence of vitamin B 12 gave diastereoisomeric 2-hydroxy-2-phenylcobalamins. The quantitative formation of styrene oxide-DNA adducts was investigated using 2-deoxyguanosine or calf thymus DNA in the presence or absence of vitamin B 12 . Microsomal incubations containing either deoxyguanosine or DNA in the absence of vitamin B 12 gave 2-amino-7-(2-hydroxy-1-phenylethyl)-1,7-dihydro-6H-purin-6-one [N7-(2-hydroxy-1-phenylethyl)-guanine], and 2-amino-7-(2-hydroxy-2-phenylethyl)-1,7-dihydro-6H-purin-6-one [N7-(2-hydroxy-2-phenylethyl)guanine] as the principal adducts. With deoxyguanosine the level of formation of guanine adducts was ca. 150 adducts/10 6 unmodified nucleoside. With DNA the adduct level was 36 pmol/mg DNA (ca. 1 adduct/0.83 × 10 5 nucleotides). Styrene oxide adducts from deoxyguanosine or DNA were not detected in microsomal incubations of styrene in the presence of vitamin B 12 . These results suggest that vitamin B 12 could protect DNA against genotoxicity due to styrene oxide and other xenobiotic metabolites. However, this potential defence mechanism requires that the 2-hydroxyalkylcobalamins derived from epoxides are not 'anti-vitamins' and ideally liberate, and therefore, recycle vitamin B 12 . Otherwise, depletion of vitamin B 12 leading to human deficiency could increase the risk of carcinogenesis initiated by genotoxic epoxides., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

In this contribution, we propose a label-free immunosensor, based on a novel type of electrolyte-gated field-effect transistor (EGOFET), for ultrasensitive detection of the C-reactive protein (CRP). The recognition layer of the biosensor is fabricated by physical adsorption of the anti-CRP monoclonal antibody onto a poly-3-hexyl thiophene (P3HT) organic semiconductor surface. A supplementary nonionic hydrophilic polymer is used as a blocking agent preventing nonspecific interactions and allowing a better orientation of the antibodies immobilized onto the P3HT surface. The whole biomolecule immobilization procedure does not require any pretreatment of the organic semiconductor surface, and the whole functionalization process is completed in less than 30 min. Surface plasmon resonance (SPR) measurements were performed to assess the amount of biomolecules physisorbed onto the P3HT and to evaluate the CRP binding proprieties of the deposited anti-CRP layer. A partial surface coverage of about 23 % of adsorbed antibody molecules was found to most efficiently sense the CRP. The electrical performance of the EGOFET immunosensor was comparable to that of a bare P3HT EGOFET device, and the obtained CRP calibration curve was linear over six orders of magnitude (from 4 pM to 2 μM). The relative standard deviation of the individual calibration points, measured on immunosensors fabricated on different chips, ranged between 1 and 14 %, and a detection limit of 2 pM (220 ng/L) was established. The novel electronic immunosensor is compatible with low-cost fabrication procedures and was successfully employed for the detection of the CRP biomarker in the clinically relevant matrix serum. Graphical abstract Schematic of the EGOFET immunosensor for CRP detection. The anti-CRP monoclonal antibody layer is physisorbed on the P3HT organic semiconductor and the CRP is directly measured by a label-free electronic EGOFET transducer.

Bio-based fuels are becoming more and more important due to the depleting fossil resources. The production of biodiesel from algae oil is challenging compared to terrestrial vegetable oils, as algae oil consists of polar fatty acids, such as phospholipids and glycolipids, as well as non-polar triglycerides and free fatty acids common in vegetable oils. It is shown that a single sulphonated solid acid catalyst can perform the esterification and transesterification reactions of both polar and non-polar lipids. In mild reaction conditions (60-70 °C) Nafion NR50 catalyst produces methyl palmitate (FAME) from the palmitic acid derivatives of di-, and tri-glyceride, free fatty acid, and phospholipid with over 80% yields, with the glycolipid derivative giving nearly 40% yields of FAME. These results demonstrate how the polar and non-polar lipid derivatives of algal oil can be utilised as feedstocks for biodiesel production with a single catalyst in one reaction step., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Polystyrene (PS, 1), polycaprolactone homopolymers (PCL, 2) and 3-Iodo-2-propynyl n-butylcarbamate (IPBC, 3) were physically mixed in dichloromethane (DCM) and processed into solid microspheres by using emulsion solvent evaporation method. Five different compositions with varying PS/PCL ratio were tested. The phase morphology of the microspheres was studied using Phase imaging atomic force microscopy (AFM) of polished cross-sections. Scanning electron microscopy was utilized to assess the distribution of IPBC in the polymer microspheres. The phase separation of the PS and PCL polymers in solvent cast films was assessed using polarized light optical microscopy of 11 polymer blends (0-100 wt-% PCL in PS). The PS/PCL-IPBC microspheres were incubated in water at RT and the release of IPBC was studied using high performance liquid chromatography (HPLC) at time points 1, 7 and 30 days. The microspheres dispersed in water borne outdoor paint matrix were tested for their antifouling activity against moulds in vitro.

Pyridyl derivatives of lipoic acid were prepared as ligands for the study of the interaction with thyroxine (T4). Thin self-assembled films of the ligands were prepared in 70% ethanol on gold and their interaction with T4 was studied by titration experiments in an aqueous buffer solution using Surface Plasmon Resonance (SPR). The thickness and refractive index of the ligand layers were calculated from SPR spectra recorded in two media, also allowing for surface coverage and the density of the layers to be estimated. Two ligands, a 4-pyridyl and a bis(2-hydroxyethyl) derivative of lipoic acid, were selected to investigate the feasibility for producing molecularly imprinted self-assembled layers on gold for T4. The methodology was to co-assemble T4 and the ligand onto the gold surface, elute the T4 from the layer under alkaline conditions, and study the rebinding of T4 to the layer. Multiple elution/rebinding cycles were conducted in different buffer solutions, and rebinding of T4 could be observed, with a moderate binding affinity that depended greatly on the solvent used. More optimal binding was observed in HBS buffer, and the affinity of the interaction could be slightly increased when the 4-pyridyl and bis(2-hydroxy-ethyl) derivatives of lipoic acid were combined in the imprinted layer.

Colloidal gold has been used as a label in sandwich assays for human IgG, in which intercalating N-[tris(hydroxymethyl)methyl]acrylamide (pTHMMAA) polymers have been employed to stabilise the particles coated with antibody fragments. A direct absorbance reading of the particles could be obtained from sandwich assays on polystyrene, and a strongly amplified response was observed in similar assays based on Surface Plasmon Resonance (SPR): for h-IgG, detection limits below 100 pg/mL could be achieved. Three different polymer lengths and two different particles sizes were compared in sandwich assays performed on polystyrene and gold. The resulting binding curves fitted well to the Langmuir-Freundlich isotherm and the binding constants were in good agreement with the values found in earlier studies. The amplification afforded by the nanoparticles was strongly dependent on the antigen concentration, on the type of polymer and on the particle size. Compared to the direct response of the antigen, amplification factors larger than 100 could be achieved. The study proves that the polymers give stabilised particles, which can be used in highly sensitive sandwich assays., (Copyright (c) 2010 Elsevier Inc. All rights reserved.)

Antibody Fab'-fragments have been immobilised on hydrophilic gold by direct self-assembly, and embedded in a matrix of non-ionic hydrophilic polymers, tris(hydroxymethyl)methylacrylamide, carrying lipoate terminal linking groups. Different polymers were synthesised, and co-adsorbed or post-adsorbed between the antibody fragments in order to optimise the antigen binding. Various factors were investigated that influence the activity of the immobilised Fab'-fragments for binding of the antigen, human IgG. The Fab'-fragments were immobilised in dense layers close to monolayer coverage, and the stoichiometric efficiency of immobilisation was up to 30%, with the human IgG also approaching monolayer coverage. The cleaning of the gold surface was a crucial factor in preservation of activity. Besides the usual treatment in hot ammonia/peroxide solution, hot DMSO appeared to be highly effective as a cleaning agent.

Chloroprene (2-chloro-1,3-butadiene, 1) is oxidised by cytochrome P450 enzymes in mammalian liver microsomes to several metabolites, some of which are reactive towards DNA and are mutagenic. Much less of the metabolite (1-chloroethenyl)oxirane (2a/2b) was formed by human liver microsomes compared with microsomes from Sprague-Dawley rats and B6C3F1 mice. Epoxide (2a/2b) was a substrate for mammalian microsomal epoxide hydrolases, which showed preferential hydrolysis of the (S)-enantiomer (2b). The metabolite 2-chloro-2-ethenyloxirane (3a/3b) was rapidly hydrolysed to 1-hydroxybut-3-en-2-one (4) and in competing processes rearranged to 1-chlorobut-3-en-2-one (5) and 2-chlorobut-3-en-1-al (6). The latter compound isomerised to (Z)-2-chlorobut-2-en-1-al (7). In microsomal preparations from human, rat and mouse liver, compounds 4, 5 and 7 were conjugated by glutathione both in the absence and presence of glutathione transferases. There was no evidence for the formation of a chloroprene diepoxide metabolite in any of the microsomal systems. The major adducts from the reaction of (1-chloroethenyl)oxirane (2a/2b) with calf thymus DNA were identified as N7-(3-chloro-2-hydroxy-3-buten-1-yl)-guanine (20) and N3-(3-chloro-2-hydroxy-3-buten-1-yl)-2'-deoxyuridine (23), with the latter being derived by alkylation at N-3 of 2'-deoxycytidine, followed by deamination. Adducts in DNA were identified by comparison with those derived from individual deoxyribonucleosides. The metabolite (Z)-2-chlorobut-2-en-1-al (7) formed principally two adducts with 2'-deoxyadenosine which were identified as a pair of diastereoisomers of 3-(2'-deoxy-beta-d-ribofuranosyl)-7-(1-hydroxyethyl)-3H-imidazo[2,1-i]purine (25). The chlorine atom of chloroprene thus leads to different intoxication and detoxication profiles compared with those for butadiene and isoprene. The results infer that in vivo oxidations of chloroprene catalysed by cytochrome P450 are more important in rodents, whereas hydrolytic processes catalysed by epoxide hydrolases are more pronounced in humans. The reactivity of chloroprene metabolites towards DNA is important for the toxicology of chloroprene, especially when detoxication is incomplete.

Acrolein is a ubiquitous environmental contaminant that has been found to be mutagenic in prokaryotic and eukaryotic cells. In the present study, we examined the reactions of acrolein with 2'-deoxyadenosine and calf thymus single- and double-stranded DNA in aqueous buffered solutions at physiological conditions. The deoxynucleoside adducts were isolated by reversed-phase liquid chromatography, and their structures were determined by their UV absorbance, mass spectrometry, and 1H and 13C NMR spectroscopy. The reaction of 2'-deoxyadenosine with acrolein resulted in the formation of four structurally different adducts (dAI, dAII, dAIII, dAIV). The structures of the novel acrolein adducts, dAIII and dAIV, were assigned as 3-[N(6)-(2'-deoxyadenosinyl)]propanal (dAIII) and 9-(2'-deoxyribosyl-6-(3-formyl-1,2,5,6-tetrahydropyridyl)purine (dAIV), respectively. The adduct dAIII was found to arise via a Dimroth rearrangement of adduct dAI, while the adduct dAIV was shown to be formed upon further reaction of acrolein with dAIII. In the reaction of acrolein with calf thymus DNA, all studied 2'-deoxyadenosine-acrolein adducts were observed. For the first time, it is shown that the N(6)-adduct and the adducts which are derived from two acrolein units are formed in calf thymus DNA.

Treatment of 2'-deoxyadenosine with acrolein at pH 4.6 in 37 degrees C affords unstable adducts containing either one or two fused ring systems where the hydroxypropano units are derived from acrolein. Since the use of 2'-deoxyadenosine resulted in the creation of at least four diastereoisomers for the adduct made up of two fused rings, therefore, for identification and assignment of the products, 9-ethyladenine was used instead as the starting material in the reaction. The products, 3E and 4E, were structurally characterised by UV, mass spectrometry and NMR spectroscopy.

The reactions of guanosine with malonaldehyde in buffered aqueous solutions in the presence of acetaldehyde or formaldehyde were studied. The reaction mixtures were analyzed by RP-HPLC. Two adducts were formed in the reaction of malonaldehyde and acetaldehyde and one in the reaction of malonaldehyde and formaldehyde. The products were isolated and purified by preparative C-18 chromatography and structurally characterized by UV absorbance, 1H NMR, and 13C NMR spectroscopy and mass spectrometry. The adducts formed in the reaction of malonaldehyde and acetaldehyde were identified as 7-(2,2-diformyl-1-methylethyl)-3-(beta-D-ribofuranosyl)pyrimido[1,2-a]-purin-10(3H)-one (M2AA-Guo I) and 2-(3,5-diformyl-4-methyl-1,4-dihydro-1-pyridyl)-9-(beta-D-ribofuranosyl)-purin-6(9H)-one (M2AA-Guo II). In the reaction of malonaldehyde and formaldehyde, the major product was identified as 7-formyl-3-(beta-D-ribofuranosyl)pyrimido[1,2-a]purin-10(8H)-one (M1FA-Guo). The highest yields of M2AA-Guo I and M2AA-Guo II, 7 and 2 mol %, respectively, were obtained in the reaction performed at pH 7.4 and 37 degrees C for 6 days, while M1FA-Guo was produced at a yield of 0.3 mol % after 3 days of reaction at pH 7.4 and 37 degrees C. The products are formed by reactions of malonaldehyde-acetaldehyde and malonaldehyde-formaldehyde condensation products with guanosine and are analogous to the previously identified condensation products formed with adenosine, cytidine, and proteins.

Two fluorescent adenosine derivatives (5 and 7) (Sch. 1) and two 6-amino-9-ethylpurine derivatives (6 and 8) (Sch. 1), were synthesised using 2-chloropropanal and 3-chloropropyne as reagents. The structures of the products were determined by spectroscopic and spectrometric methods (1H-, 13C- and 2D NMR, MS, UV and fluorescence spectrometry). Their fluorescence properties were determined and found to be similar to those of ethenoadenosine. Also, the stabilites of 5 and 7 in aqueous solutions were determined and found to be higher than that of the etheno derivative of adenosine.

Guanosine has been reacted with triformylmethane (TFM) in refluxing pyridine. Four different products, 4-7, were isolated by preparative RP-HPLC, and characterized by 1H and 13C NMR and UV spectroscopy and mass spectrometry. One of the products. the cyclic 1:1 adduct 4, is a stable cyclic carbinolamine formed probably by cyclization of the expected aminomethylene derivative 3. Compound 4 then undergoes reversible dehydration to the fully conjugated adduct 5. The appearance of the additional adducts, 6 and 7, suggests that TFM is prone to transformations resulting in the formation of methylenemalonaldehyde (9) and 1,1,3,3-tetraformylpropane (11).

Chlorinated drinking water contains several chlorohydroxyfuranone (CHF) by-products whose contribution to cancer risk is not presently known. 3,4-Dichloro-5-hydroxy-2(5H)-furanone (MCA), 3-chloro-4-(chloromethyl)-5-hydroxy-2(5H)-furanone (CMCF), and 3- chloro-4-methyl-5-hydroxy-2(5H)-furanone (MCF) were studied for the induction of DNA damage, using the alkaline single-cell gel (SCG)/comet assay, and for chromosome damage, using sister-chromatid exchange (SCE) and chromosome aberration (CA) tests, in Chinese hamster ovary (CHO) cells. 3-Chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX), the known genotoxic chlorination by-product and a rat carcinogen, was used as a reference chemical. The SCG analyses were done using concentrations that caused little or no cytotoxicity compared to that of the concurrent control cultures. In the cytogenetic tests, the CHFs were tested up to maximum cytotoxicity. MX and MCA were the most cytotoxic of the compounds in CHO cells followed by CMCF and MCF. All of the CHFs induced DNA damage, SCEs and CAs (mainly chromatid-type breaks and exchanges) in a concentration-related manner, with the exception that MCA was a weak inducer of SCEs. There were no significant differences between the lowest concentration of MX, MCA, and CMCF to cause DNA damage (SCG assay). Based on comparisons of the slopes of regression lines, MX was somewhat more potent than either MCA or CMCF, and MCF was clearly less potent than the other three compounds in the assay. The order of potency was MX > CMCF > MCA > MCF in inducing SCEs and MX > MCA > CMCF > MCF in inducing CAs. The data show that there are differences in the potency of genotoxicity among the CHFs tested. In many cases, however, the extent of maximum effect observed was comparable between the compounds. The results suggest that besides MX other CHFs should be considered in the evaluation of genotoxic risks associated with the consumption of chlorinated drinking water., (Copyright 2001 Wiley-Liss, Inc.)

2'-Deoxyadenosine was reacted with malonaldehyde in the presence of formaldehyde or acetaldehyde. The reactions were carried out at 37 degrees C in aqueous solution at acidic conditions. The reaction mixtures were analyzed by HPLC. In both reactions, two major products were formed. The reaction products were isolated and purified by C18 chromatography, and their structures were characterized by UV absorbance, fluorescence emission, (1)H and (13)C NMR spectroscopy, and mass spectrometry. The reaction products isolated from the mixture containing formaldehyde, malonaldehyde, and deoxyadenosine were identified as 3-(2'-deoxy-beta-D-ribofuranosyl)-7H-8-formyl[2,1-i]pyrimidopurine (M(1)FA-dA) and 9-(2'-deoxy-beta-D-ribofuranosyl)-6-(3,5-diformyl-1, 4-dihydro-1-pyridyl)purine (M(2)FA-dA). In the reaction mixture consisting of acetaldehyde, malonaldehyde, and deoxyadenosine, the identities of the products were determined to be 3-(2'-deoxy-beta-D-ribofuranosyl)-7-methyl-8-formyl[2, 1-i]pyrimidopurine (M(1)AA-dA) and 9-(2'-deoxy-beta-D-ribofuranosyl)-6-(3,5-diformyl-4-methyl-1, 4-dihydro-1-pyridyl)purine (M(2)AA-dA). The yields of the compounds were 1.8 and 0.7% for M(1)FA-dA and M(2)FA-dA, respectively, and 6.8 and 10% for M(1)AA-dA and M(2)AA-dA, respectively. All compounds exhibited marked fluorescent properties. These findings show that in addition to direct reaction of a specific aldehyde with 2'-deoxyadenosine, aldehyde conjugates also may react with the base. Although three of the adducts (M(1)FA-dA, M(2)FA-dA, and M(1)AA-dA) could not be detected in reactions carried out under neutral conditions, the possibility that trace amounts of the adducts may be formed under physiological conditions cannot be ruled out. Therefore, conjugate adducts must be considered in work that aims at clarifying the mechanism of aldehyde genotoxicity.

Chlorohydroxyfuranones (CHFs) are mutagenic disinfection by-products found in chlorine-treated drinking water. In the current study, the genotoxicity of four CHFs, 3,4-dichloro-5-hydroxy-2(5H)-furanone (MCA), 3-chloro-4-methyl-5-hydroxy-2(5H)-furanone (MCF), 3-chloro-4-(chloromethyl)-5-hydroxy-2(5H)-furanone (CMCF) and 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX), was determined. Two in vitro assays, the microscale micronucleus assay on L5178Y mouse lymphoma cells and the unscheduled DNA synthesis assay on a hepatocyte primary culture from Fisher F344 rats, were carried out. All four CHFs demonstrated genotoxic effects in both assays. In the two systems used, CMCF was the most genotoxic compound, followed by MCA, MX and MCF, respectively. This work was the first study of the DNA damaging properties of all four CHFs in two in vitro genotoxicity tests. These new data expand the range of genetic damages induced by this group of compounds.

The work reported here concerned the structural determination of adducts formed in reactions of nucleosides with chlorohydroxyfuranones and with conjugates of malonaldehyde and acetaldehyde. The chlorohydroxyfuranones are bacterial mutagens produced during chlorine disinfection of drinking-water, malonaldehyde is the major end-product of lipid peroxidation, and acetaldehyde is the major metabolite of ethanol. Exogenous sources of acetaldehyde are, for example, tobacco smoke and automobile emissions. The chlorohydroxyfuranones were found to form substituted and unsubstituted cyclic etheno adducts with adenosine, cytidine and guanosine and substituted cyclic propeno adducts with adenosine. The malonaldehyde-acetaldehyde conjugates reacted with adenosine to produce a strongly fluorescent dihydropyridine purine derivative and a substituted propenoformyl adenosine derivative. Most of the adducts identified in this study are new, and their mutagenic properties are as yet unknown.

Malonaldehyde (malondialdehyde, MDA) was reacted with 2'-deoxyadenosine in buffered aqueous solution. HPLC analyses of the reaction mixtures showed that, besides the two previously characterized N6-propenal (M1dA) and N6-oxazocinyl (M3dA) adenine adducts, a third compound eluting at longer retention time was formed. The compound generated a strong peak in the chromatogram recorded by a fluorescence detector. The new compound was isolated by preparative C18 chromatography, and its structure was characterized by UV absorbance, fluorescence emission, 1H and 13C NMR spectroscopy, and mass spectrometry. The product was identified as 9-(2'-deoxyribosyl)-6-(3,5-diformyl-4-methyl-1, 4-dihydro-1-pyridyl)purine (M2AA-dA). The yield of the product was 0.8% following 7 days of reaction at 37 degreesC and pH 4.6. Lower yields were obtained at higher pH conditions. By the addition of acetaldehyde, the yield increased about 10-fold at all studied pH conditions. The adduct was most likely formed by an initial condensation of two molecules of malonaldehyde with one molecule of acetaldehyde followed by reaction of the condensation product with the exocyclic amino group of 2'-deoxyadenosine. The identification of this adduct shows that acetaldehyde may react with DNA bases also through an initially formed malonaldehyde-acetaldehyde condensation product.

Calf thymus DNA was reacted with the extremely potent bacterial mutagen 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) and the structurally related compounds 3,4-dichloro-5-hydroxy-2(5H)-furanone (MCA) and 3-chloro-4-methyl-5-hydroxy-2(5H)-furanone (MCF). The chromatograms of the HPLC analyses of the DNA hydrolysates showed peaks that represented adducted base moieties. It was possible to establish the structures of the adducts by comparing UV spectra and chromatographical properties of the DNA adducts with known adenosine and 2'-deoxyadenosine adducts. The DNA adduct produced by MX was identified as 3-(2'-deoxyribofuranosyl-N6-adenosinyl)propenal (M1A-dR). It was calculated that 1 nucleotide/10(5) nucleotides was converted to M1A-dR. The same adduct was formed also in the reaction of MX with 2'-deoxyadenosine (yield 0.01%). The M1A-dR adduct may play a role in the mutational events induced by MX in Salmonella typhimurium strain TP2428. The adducts produced in the reactions of MCA and MCF with DNA were identified as 3-(2'-deoxyribofuranosyl)-7-formylimidazo[2,1-i]purine (epsilon cA-dR) and 4-(2'-deoxyribofuranosyl-N6-adenosinyl)-3-formyl-3-butenoic acid (fbaA-dR), respectively. The yield of epsilon cA-dR was 5 adducts/ 10(6) nucleotides and of fbaA-dR 4 adducts/10(5) nucleotides. The biological significance of these adducts is unknown.

The bacterial mutagen mucochloric acid was reacted with adenosine in aqueous solutions at 37 degrees C. In the HPLC chromatograms of the reaction mixtures two peaks of unidentified products were observed at longer retention times than the previously characterized "etheno" and "ethenocarbaldehyde" adducts. Following isolation and purification with chromatographic methods, the products were characterized by UV absorbance, 1H and 13C NMR spectroscopy, and thermospray mass spectrometry. The products were found to consist of ethenoadenosine derivatives which bonded an additional adenosine unit to C-8 in the etheno bridge. In one of the products a formyl group and in the other an oxalo group was localized at C-7 in the etheno bridge. The yield of the products was about 0.04 mol% (calculated from the original amount of adenosine) in the reaction mixture held for 4 days at pH 7.4. It was concluded that mucochloric acid acts as an oxidative agent during the course of formation of the products.