Search

Over the past six decades, dye laser technology has improved substantially. The usage of solid matrices containing laser dyes is becoming more and more popular as a viable substitute for the traditional liquid dye solutions. In this research, we designed and built a tunable solid dye laser device which consists of three main parts. (i) The active material producing the laser beam, which is a polymer rod [glycidyl methacrylate (GMA) polymer] doped with the laser dyes pyrromethene 597 (PM-597) or Nile blue (Nb-690). (ii) The pumping source is xenon linear flashlamp driven by a homemade power supply. (iii) Two broadband mirrors providing the optical feedback stable optical resonator. The properties of the gain medium and hence the laser emission characteristics were determined, and the results showed the efficiency of the homemade tunable solid dye laser device, that is suitable for a variety of applications. [ABSTRACT FROM AUTHOR]

Traditional distributed feedback (DFB) or distributed Bragg reflector (DBR) lasers typically have commonly employed buried gratings as frequency-selective optical feedback mechanisms. However, the fabrication of such gratings often requires regrowth processes, which introduce significant technical challenges, particularly for material systems such as GaAs and GaSb. While metal gratings have been implemented in GaSb-based lasers, they incur additional absorption losses, thereby constraining the device's efficiency and achievable output power. Herein, we introduce a laterally coupled dielectric Bragg grating structure, which enables highly controllable, deterministic, and stable coupling between the grating and the optical mode. Our device demonstrates a continuous-wave output power of 47.02 mW at room temperature, exhibiting stable single-mode operation from 300 to 1000 mA and a maximum side mode suppression ratio of 46.7 dB. These results underscore the innovative lateral coupled dielectric grating as a feasible and technologically superior approach for fabricating DFB and DBR lasers, which hold universal applicability across different material platforms and wavelength bands. [ABSTRACT FROM AUTHOR]

The study shows that, in waveguide (WG) configuration, the coupling of a 2D plasmonic metamaterial grating (MMG) having a conventional Bragg period along the guide but a distinct period along the transverse axis can lead to Electromagnetically‐Induced‐Transparency (EIT) behavior. This epitomizes that metamaterials, as functional photonic building blocks, can lead to low losses in many standard devices if properly designed. The study reported the observation in passive WGs of a marked Fano‐type EIT resonance with record high‐quality factor: Q = 5000 and contrast >20 dB. Unlike any standard metal grating, MMG‐assisted waveguides exhibit strong grating coupling strength and low‐loss properties simultaneously. This concept is further applied to demonstrate single‐frequency‐emission electrically‐injected Distributed Feedback (DFB) lasers in the near‐infrared telecom domain. The key point is that laser emission occurs at the peak of EIT, i.e., the maximum in transmission. It therefore addresses one of the main critical issues of DFB lasers related to the single frequency yield. The laser performances are state‐of‐the‐art (Ith < 20 mA, Pmax > 20 mW at I = 200 mA, SMSR > 50 dB, optical feedback tolerance >−21 dB compliant with IEEE 802.3 standard). The presented approach, compatible with existing industrial technologies, is promising for real‐life telecom applications. [ABSTRACT FROM AUTHOR]

The Radixact system (Accuray Inc., Sunnyvale, CA) is the latest platform release based on the TomoTherapy technology. The most recent system does not apply a leaf latency model correction after plan optimization to ensure the correct MLC leaf‐open time (LOT) agreement between the TPS and machine delivery. The MLC uses optical sensors to measure the delivered LOTs in real‐time and individual leaf‐specific latency corrections are made to ensure agreement. The aim of this study was to assess the performance of the Radixact MLC with leaf‐specific latency correction using the optical sensor's real‐time feedback. Specifically, the study statistically evaluated the MLC LOT errors observed from 290 plan‐specific quality assurance (PSQA) measurements. Repeatability testing was performed to quantify the uncertainty in the MLC feedback system delivery by analyzing > 1300 delivered treatment fractions throughout the course of radiotherapy. The clinical impact was evaluated by estimating the resulting dose difference in the patient targets due to the measured plan latencies. Our study measured an average plan latency equal to 2.0 ± 0.4 ms (0.6% ± 0.2%) for 290 PSQAs. Repeatability tests showed a mean standard deviation in plan latencies measuring 0.05 ms (0.02%). The deviation from the TPS in the mean target dose due to the plan latencies was estimated to be 0.0% ± 0.2% (range: ‐0.7%–1.1%). The current MLC system with real‐time optical sensor feedback is capable of accurately delivering the TPS‐generated sinograms. Repeatability test results showed that the system allows for high reliability in daily sinogram delivery. The MLC latency deviations were shown to have minimal clinical impact on the overall target dosimetry. [ABSTRACT FROM AUTHOR]

This paper presents a pioneering approach to bolstering network security and privacy by implementing chaotic optical communication with a hybrid optical feedback system (HOFS). The current baseline methods in network security are often less feasible for hybrid feedback systems, including limited robustness, compromised security, and synchronization challenges. Therefore, this paper proposes a hybrid approach to address these shortcomings by integrating the HOFS into chaotic optical communication systems (HOFS-COCS) to overcome the baseline challenges. This paper aims to improve network security while significantly maintaining efficient communication channels. Moreover, We designed two algorithms, one for chaotic maps generation and another for text encryption and decryption, to improve security in the hybrid feedback system. Our findings demonstrate through rigorous experimentation and analysis that the proposed (HOFS-COCS) method significantly improves network security by enabling reliable chaos generation, synchronization, and secure message transmission in chaotic optical communication systems. This research represents a significant advancement towards enhanced secrecy and synchronization in chaotic optical communication systems, promising a paradigm shift in network security protocols. [ABSTRACT FROM AUTHOR]

In simulations of radiative‐convective equilibrium (RCE), and with sufficiently large domains, organized convection enhances top of atmosphere outgoing longwave radiation due to the reduced cloud coverage and drying of the mean climate state. As a consequence, estimates of climate sensitivity and cloud feedbacks may be affected. Here, we use a multi‐model ensemble configured in RCE to study the dependence of explicitly calculated cloud feedbacks on the existence of organized convection, the degree to which convection within a domain organizes, and the change in organized convection with warming sea surface temperature. We find that, when RCE simulations with organized convection are compared to RCE simulations without organized convection, the propensity for convection to organize in RCE causes cloud feedbacks to have larger magnitudes due to the inclusion of low clouds, accompanied by a much larger inter‐model spread. While we find no dependence of the cloud feedback on changes in organization with warming, models that are, on average, more organized have less positive, or even negative, cloud feedbacks. This is primarily due to changes in cloud optical depth in the shortwave, specifically high clouds thickening with warming in strongly organized domains. The shortwave cloud optical depth feedback also plays an important role in causing the tropical anvil cloud area feedback to be positive which is directly opposed to the expected negative or near zero cloud feedback found in prior work. Plain Language Summary: Tropical clouds play an important role in the uncertainty associated with understanding how the Earth's climate responds to an imposed warming. Here, we look at how organized cloud systems associated with the tropics affect the processes that govern the climate response to warming. We find that strongly organized cloud systems reduce how strongly the Earth responds to warming. This is primarily associated with the changes in the optical properties of high clouds. These cloud properties impact the overall understanding of the role tropical clouds play in modulating the Earth's temperature and calls into question prior assumptions of its behavior. Key Points: Domains with organized convection have cloud feedbacks with the same sign but larger inter‐model spread than domains without organizationThe cloud feedback parameter is less positive, or even negative, for more strongly organized domainsIn radiative‐convective equilibrium, the tropical anvil cloud area feedback is positive due to the shortwave cloud optical depth feedback [ABSTRACT FROM AUTHOR]

Self-mixing interference (SMI) has emerged as a powerful non-contact vibration sensing technique, leveraging the inherent coupling between laser emission and external optical feedback. However, conventional SMI systems often face limitations in signal resolution and measurement accuracy, particularly when probing low-amplitude vibrations or low-reflectivity targets. This study proposes a frequency modulation (FM) approach, FM-SMI, to enhance the capabilities of SMI setups. By intentionally modulating the laser frequency of 20 kHz, the FM-SMI technique induces a segmentation of the interference signal, effectively increasing the temporal resolution and facilitating the detection of finer vibration details. Comprehensive experiments involving oscillating speakers and rotating silicon wafers validate the superior performance of the FM-SMI system. Notably, the frequency-modulated signals exhibit stability and robustness, even under low-amplitude vibration conditions or when targeting low-reflectivity surfaces. The enhanced signal quality, coupled with numerical processing techniques, enables precise extraction of vibration characteristics, including amplitude variations and surface topographies. The proposed FM-SMI approach demonstrates its potential as a versatile tool for high-precision, non-contact vibration measurements across diverse applications, such as, non-destructive testing and the characterization of vibration induced by the rotational systems. [ABSTRACT FROM AUTHOR]

Feedback-insensitive Quantum Dot (QD) comb lasers hold significant promise for integrated dense wavelength division multiplexing photonic systems due to their ability to generate multiple wavelengths and operate without bulky isolators, facilitating the development of high-density and large-scale photonic integrated circuits. In this study, we investigated the optical feedback (OFB) influence of the InAs/GaAs QD comb laser from various perspectives. Our findings reveal that the comb laser exhibits a stable locking region with consistent optical spectra across a range of OFB strengths (−45 to −10 dB). Furthermore, under a high OFB strength of −10 dB, there is a notable 40 dB suppression of relative intensity noise in the low-frequency range (below 1 GHz). Transmission experiments demonstrate clear eye openings at 25 Gbps using a bit pattern of 231-1 pseudorandom binary sequence. Remarkably, the bit error rates decrease by five orders of magnitude under −10 dB OFB. These results indicate the ultra-robustness of 100 GHz grid QD comb laser, which exhibits great transmission enhancement under a strong OFB of −10 dB. [ABSTRACT FROM AUTHOR]

Introduction: In this paper, recent developments in non-destructive testing of 3D-printed ceramics and monitoring of additive manufacturing of ceramics are presented. Methods: In particular, we present the design and use of an inline midinfrared optical coherence tomography (MIR-OCT) system to evaluate printed and micro-structured specimens in lithography-based ceramic manufacturing (LCM). Results: The proposed system helps with the detection of microdefects (e.g., voids, inclusions, deformations) that are already present in green ceramic components, thereby reducing the energy and costs incurred. Discussion: The challenges during integration are discussed. Especially, the prospects for MIR-OCT imaging combined with machine learning are illustrated with regard to inline inspection during LCM of printed ceramics. [ABSTRACT FROM AUTHOR]

To solve the problem of large feedback gain coefficient required for delay feature hiding in existing chaotic secure laser communication systems, a chaotic secure communication system based on all optical chaos injection double-loop electro-optical phase feedback loop was designed. Firstly, optical chaos was generated by all optical feedback and coupled to two electro-optic phase chaos feedback loops. Then, the nonlinear coupling of information and chaotic carrier was achieved through phase modulation to participate in the generation of chaotic carrier. Finally, the signal was decrypted by optical chaos synchronization at the detection end. The complexity, TDS hiding, synchronization, robustness and communication performance of chaotic signals in the system were analyzed by MATLAB software. The results demonstrate that the designed chaotic secure communication system has higher complexity and the TDS are completely hidden when the feedback coefficient is small.

The measurement and control of mechanical resonators are critical for cavity magnomechanics, which has emerged as an important frontier for hybrid quantum systems based on magnonics. Traditional microwave-based measurements require handling high-frequency signals and cannot achieve field distribution detection. Here, we demonstrate a method for optically measuring and manipulating a ferromagnetic mechanical resonator. This technique allows for direct observation of the response and field distribution of mechanical oscillations during magnomechanically induced transparency/absorption processes, confirming that the mechanical mode S 1 , 2 is coupled with the magnon. The optical measurement not only serves to validate the magnomechanical coupling theory but also reduces the necessity for high-frequency measurements. Furthermore, we utilize the instantaneously measured results to implement feedback control of the self-oscillating mechanical resonator to overcome the dynamical back-action limit, achieving a threefold enhancement of phonon lasing amplitude. This feedback control lays the foundation for the study of quantum cavity magnomechanics, such as the feedback cooling of a magnomechanical resonator. [ABSTRACT FROM AUTHOR]

Thin film lithium niobate (TFLN) has become a promising material platform for large scale photonic integrated circuits (PICs). As an indispensable component in PICs, on-chip electrically tunable narrow-linewidth lasers have attracted widespread attention in recent years due to their significant applications in high-speed optical communication, coherent detection, precision metrology, laser cooling, coherent transmission systems, light detection and ranging (LiDAR). However, research on electrically driven, high-power, and narrow-linewidth laser sources on TFLN platforms is still in its infancy. This review summarizes the recent progress on the narrow-linewidth compact laser sources boosted by hybrid TFLN/III-V semiconductor integration techniques, which will offer an alternative solution for on-chip high performance lasers for the future TFLN PIC industry and cutting-edge sciences. The review begins with a brief introduction of the current status of compact external cavity semiconductor lasers (ECSLs) and recently developed TFLN photonics. The following section presents various ECSLs based on TFLN photonic chips with different photonic structures to construct external cavity for on-chip optical feedback. Some conclusions and future perspectives are provided. [ABSTRACT FROM AUTHOR]

Increasingly, artificial intelligent systems look to neuromorphic photonics for its speed and its low loss, high bandwidth interconnects. Silicon photonics has shown promise to enable the creation of large scale neural networks. Here, we propose a monolithic silicon opto-electronic resonator spiking neuron. Existing designs of photonic spiking neurons have difficulty scaling due to their dependence on certain nonlinear effects, materials, and devices. The design discussed here uses optical feedback from the transmission of a continuously pumped microring PN modulator to achieve excitable dynamics. It is cascadable, capable of operating at GHz speeds, and compatible with wavelength-division multiplexing schemes for linear weighting. It is a Class 2 excitable device via a subcritical Hopf bifurcation constructed from devices commonly found in many silicon photonic chip foundries. Silicon photonics can be used to create high-speed large-scale neuromorphic systems for artificial intelligent tasks. Here, the authors discuss the design details and behavior of a resonator spiking neuron that can be fabricated in a commercial silicon photonics foundry process. [ABSTRACT FROM AUTHOR]

Lasing in the bad-cavity regime has promising applications in quantum precision measurement and frequency metrology due to the reduced sensitivity of the laser frequency to cavity-length fluctuations. Thus far, relevant studies have been mainly focused on conventional cavities whose finesse is high enough that the resonance linewidth is sufficiently narrow compared to the cavity's free spectral range, though still in the bad-cavity regime. However, lasing output from the cavity whose finesse is close to the limit of 2 has never been experimentally accessed. Here, we demonstrate an extremely bad-cavity laser, analyze the physical mechanisms limiting cavity finesse, and report on the worst-ever laser cavity with finesse reaching 2.01. The optical cavity has a reflectance close to zero and only provides weak optical feedback. The laser power can be as high as tens of μW and the spectral linewidth reaches a few kHz, over one thousand times narrower than the gain bandwidth. In addition, the measurement of cavity pulling reveals a pulling coefficient of 0.0148, the lowest value ever achieved for a continuous-wave laser. Our findings open up an unprecedentedly innovative perspective for future new ultra-stable lasers, which could possibly trigger future discoveries in optical clocks, cavity QED, continuous-wave superradiant laser, and explorations of quantum many-body physics. [ABSTRACT FROM AUTHOR]

A method for generating bandwidth-enhanced chaotic laser with time-delay signature suppression by a microring resonator is proposed and demonstrated experimentally. Through multiple beam interference effect and nonlinear effect within a microring resonator, chaotic laser generated by conventional optical feedback is optimized. A chaotic laser with the standard bandwidth of 26.5 GHz, the spectrum flatness of ±1.5 dB, and the time-delay signature value of 0.09 is obtained. The influence of the injection power and the frequency detuning on the optimized characteristics of chaotic laser are analyzed. The results show that chaotic laser with the standard bandwidth above 20 GHz and the spectrum flatness below ±3.5 dB can be achieved simultaneously in wide operating parameter regions. Furthermore, the effect of the radius of a microring resonator on the characteristics of the chaotic laser is investigated. The results show that a microring resonator can realize the performance optimization of chaotic laser. Due to the decreased loss, the time-delay signature suppression is better as the radius of a microring resonator increases. This scheme is simple and integration-compatible, which contributes to the development of an integrated, time-delay signature suppressed and broadband chaotic laser sources. [ABSTRACT FROM AUTHOR]

Random lasing (RL) is an optical phenomenon that arises from the combination of light amplification with optical feedback through multiple scattering events. In this paper, we present our investigations of RL generation from human blood samples. We tested mixtures of rhodamine B dye solutions with different blood components, including platelets, lymphocytes, erythrocytes, and whole blood. Intense coherent RL was obtained in all cases at relatively low pump thresholds, except for erythrocytes. We also studied the potential of RL signal analysis for biosensing applications using blood samples from healthy individuals and patients suffering from Chronic Lymphocytic Leukemia (CLL). CLL is a blood disease characterized by a high count of lymphocytes with significant morphological changes. A statistical analysis of the RL spectra based on principal component and linear discriminant analyses was conducted for classification purposes. RL-based sample discrimination was conducted for whole blood, platelet, and lymphocyte samples, being especially successful (86.7%) for the latter. Our results highlight the potential of RL analysis as a sensing tool in blood. [ABSTRACT FROM AUTHOR]

We report the development of an optical feedback linear cavity-enhanced absorption spectroscopy instrument for HO2 detection using a distributed feedback (DFB) diode laser operating at 1506 nm. A direct and accurate method of reflectivity measurement based on the analysis of cavity mode signals was proposed. A differential circuit was used to judge the zero crossing point of the optical feedback cavity mode in the center of the frequency locking region, and shift the laser operating current to the non-resonant region. In this way, a ring-down signal was obtained with a time of 17.9 μs, corresponding to an effective absorption pathlength of 5.37 km. Combining the standing wave condition, the relationship between cavity length and drive voltage of the PZT mounted on the cavity rear mirror is translated into a correlation between the transmitted light wavenumber and the PZT voltage. The spectral resolution was improved from 290 MHz to 97 MHz by precisely tuning the PZT voltage. The achieved detection sensitivity of the system was 7 × 10− 10 cm− 1 with a data acquisition time of 10.6 s. The absorption spectrum of HO2 at 6638.205 cm− 1 was measured at a cell pressure of 50 mbar with a detection limit of 3.24 × 109 molecule/cm3. [ABSTRACT FROM AUTHOR]

In situ measurements of water vapour isotopic composition in polar regions has provided needed constrains of post-deposition processes involved in the archiving of the climatic signal in ice core records. During polar winter, the temperatures, and thus the specific humidity, are so low that current commercial techniques are not able to measure the vapour isotopic composition with enough precision. Here, we make use of new developments in infrared spectroscopy and combine an optical-feedback frequency-stabilised laser source (OFFS technique) using a V-shaped cavity optical feedback (VCOF) cavity and a high-finesse cavity ring-down spectroscopy (CRDS) cavity to increase the signal-to-noise ratio while measuring absorption transitions of water isotopes. We present a laboratory infrared spectrometer leveraging all these techniques dedicated to measure water vapour isotopic composition at low humidity levels. At 400 ppmv , the instrument demonstrates a precision of 0.01 ‰ and 0.1 ‰ in δ18O and d-excess, respectively, for an integration time of 2 min. This set-up yields an isotopic composition precision below 1 ‰ at water mixing ratios down to 4 ppmv , which suggests an extrapolated precision in δ18O of 1.5 ‰ at 1 ppmv. Indeed, thanks to the stabilisation of the laser by the VCOF, the instrument exhibits extremely low drift and very high signal-to-noise ratio. The instrument is not hindered by a strong isotope–humidity response which at low humidity can create extensive biases on commercial instruments. [ABSTRACT FROM AUTHOR]

We report a thin-film optical amplifier integrated on a fiber facet based on polymer-coated distributed feedback (DFB) microcavities, which are fabricated on a planar substrate and then transferred onto fiber tips by means of a flexible transfer technique. The amplified light directly couples into the fiber and is detected when coupled out at the other end after propagating along the fiber for about 20 cm. A prominently amplification factor of about 4.33 at 578.57 nm is achieved by sending supercontinuum pulses into the hundreds of micrometers' DFB microcavities along the normal direction, which is also the axis direction of the fiber. The random distortions of grating lines generated during the transfer process result in a larger amplification spectral range and a less strict polarization dependence for injected light. Benefitting from the device size of hundreds of micrometers and the ease of integration, polymer amplifiers based on DFB microcavities demonstrate significant application potentials in optical communication systems and miniaturized optical devices. [ABSTRACT FROM AUTHOR]

We experimentally demonstrate a scheme for generating massively parallel and real-time physical random bits (PRBs) by using weak-resonant-cavity Fabry-Perot laser diodes (WRC-FPLDs) with optical feedback. By using external optical feedback to modify the nonlinear dynamic behavior of the longitudinal modes in WRC-FPLDs, the chaotic behavior of each channel can be induced under suitable feedback strength. By filtering these longitudinal modes, a real-time PRBs at 10 Gbits/s can be generated by using field programmable gate array (FPGA) board for the real-time post-processing of a single-channel chaotic signal. Considering the presence of up to 70 longitudinal modes within a broad spectral range exceeding 40 nm, each of these modes can be used to extract chaotic time sequences for random number generation. Therefore, our PRB generation scheme has the potential to achieve a data throughput of over 700 Gbits/s. [ABSTRACT FROM AUTHOR]

We experimentally investigate the dynamics characteristics of a two-state quantum dot laser (TSQDL) subject to optical feedback. Firstly, we inspect the impact of the temperature on the power-current characteristics of the ground state (GS) lasing and the excited state (ES) lasing in the TSQDL operating at free-running. The results demonstrate that with the decrease in the temperature, the threshold current for GS lasing ( I t h G S ) and the threshold current for ES lasing ( I t h E S ) decrease very slowly. There exists a current for GS quenching ( I Q G S ), which is gradually increased with the decrease in the temperature. After introducing optical feedback, the overall trend of change is similar to those obtained under free-running. Next, through inspecting the time series and power spectrum of the output from the TSQDL under optical feedback, the dynamical characteristics of the TSQDL are investigated under different feedback ratios, and diverse dynamical states including quasi-chaos pulse package, chaos state, regular pulse package, quasi-period two, quasi-regular pulsing, and chaos regular pulse package have been observed. Finally, for the TSQDL biased at three different cases: lower than I t h E S , slightly higher than I t h E S , and higher than I t h E S , nonlinear dynamic state evolutions with the increase in feedback ratio are inspected, respectively. The results show that, for the TSQDL biased at lower than I t h E S , it presents an evolution route of stable state—quasi-chaos pulse package—chaos state—regular pulse package. For the TSQDL biased at slightly larger than I t h E S , it presents an evolution route of stable state—quasi-regular pulsing—quasi-period two—chaos regular pulse package. For the TSQDL biased at higher than I t h E S , the TSQDL always behaves stable state within the range of feedback ratio that the experiment can achieve. However, with the increase in optical feedback ratio, the number of longitudinal modes for GS lasing and ES lasing are changed. [ABSTRACT FROM AUTHOR]

In this paper a novel optical vector network analyzer (OVNA) utilizing a distributed feedback semiconductor optical amplifier (DFB-SOA) is introduced. The proposed OVNA is implemented by converting the transmission response of the optical device under test (ODUT) into the electrical domain. The main principle of the OVNA is predicated on the optical carrier restoration facilitated by the wavelength-selective amplification attribute of the DFB-SOA. The implemented OVNA effectively determined the transmission spectrum of an optical filter possessing a passband of 9-GHz bandwidth, achieving a commendable resolution of 25 MHz in the measurement process. The dynamic range of the OVNA can be broadened by adjust the driven current under the DFB-SOA. Additionally, the detection range of our system can be expanded through the utilization of broadband optoelectronic devices. Furthermore, the OVNA possesses considerable potential for integration onto a single chip. [ABSTRACT FROM AUTHOR]

The authors report incoherent random laser action in systems where the optical feedback is provided by multiple scattering generated by different classes of silver nanoparticles in the colloidal state, having plasmon resonances at different frequencies. They found improved performance of triangular silver nanoplates as compared to nanospheres, with a threshold as low as 1 mJ/cm2 and a 5 times lower optimal silver concentration, due to plasmonic enhancement effects and tuning of the plasmon resonance. The nanoparticles were also tested for stability against illumination by the pump laser, as the onset of pulsed laser melting is comparable to random laser threshold in terms of pump fluence, severely limiting the range of operation of nanoparticles with main plasmon resonance close to the pump wavelength. The optimal approach to choose plasmonic nanoparticles for random lasing must, therefore, take the stability aspect into serious consideration as well as the plasmonic enhancement of random lasing. [ABSTRACT FROM AUTHOR]

In this paper, we propose using a chaotic system composed of nanolasers (NLs) as a physical entropy source. Combined with post-processing technologies, this system can produce high-quality physical random number sequences. We investigated the parameter range for achieving time-delay signature (TDS) concealment in the chaotic system. This study demonstrates that NLs exhibit noticeable TDS only under optical feedback. As mutual injection strength between the master NLs (MNLs) increases, the TDS of the MNLs is gradually suppressed until they are completely concealed. Compared to MNLs, the slave NL (SNL) exhibits better TDS suppression performance. Additionally, we investigated the chaotic and highly unpredictable regions of the SNL, demonstrating that high-quality chaotic signals can be produced over a wide range of parameters. Using TDS hidden and highly unpredictable chaotic signals as the source of random entropy, the effects of different post-processing techniques on random number extraction were compared. The results indicate that effective post-processing can enhance the unpredictability of the random sequence. This study successfully utilized NLs for random number generation, showcasing the potential and application prospects of NLs in the field of random numbers. [ABSTRACT FROM AUTHOR]

As a new type of semiconductor laser, photonic crystal surface-emitting lasers (PCSELs) feature large-area single-mode surface emission with high power and high beam quality. The unique features of single-mode lasing over a large area active region are implemented by the in-plane optical feedback from two-dimensional (2D) photonic crystal cavities. In larger PCSEL cavities, the lasing gain threshold becomes similar for the fundamental and high-order modes, which degrades single-mode operation. Here, we investigate the impact of carrier injection on PCSEL modes by controlling the injection area and the gain mode interaction. Optical and electrical simulations are carried out to calculate the gain mode overlapping factor for different p electrode designs. We fabricated 250 × 250 µm2 photonic crystal cavities with different p electrode sizes for injection area control. The PCSEL device characterization results show that devices with an electrode size to cavity side length ratio of 0.6 have the maximum slope efficiency and a lower lasing threshold with a single lobe beam profile. Such selective carrier injection can also provide gain-guided resonance in the PCSEL cavities and enhance optical gain in the fundamental mode while suppressing gain in the high-order modes. [ABSTRACT FROM AUTHOR]

Background and purpose: By employing three surface‐guided radiotherapy (SGRT)‐assisted positioning methods, we conducted a prospective study of patients undergoing SGRT‐based deep inspiration breath‐hold (DIBH) radiotherapy using a Sentine/Catalys system. The aim of this study was to optimize the initial positioning workflow of SGRT‐DIBH radiotherapy for breast cancer. Materials and methods: A total of 124 patients were divided into three groups to conduct a prospective comparative study of the setup accuracy and efficiency for the daily initial setup of SGRT‐DIBH breast radiotherapy. Group A was subjected to skin marker plus SGRT verification, Group B underwent SGRT optical feedback plus auto‐positioning, and Group C was subjected to skin marker plus SGRT auto‐positioning. We evaluated setup accuracy and efficiency using cone‐beam computed tomography (CBCT) verification data and the total setup time. Results: In groups A, B, and C, the mean and standard deviation of the translational setup‐error vectors were small, with the highest values of the three directions observed in group A (2.4 ± 1.6, 2.9 ± 1.8, and 2.8 ± 2.1 mm). The rotational vectors in group B (1.8 ± 0.7°, 2.1 ± 0.8°, and 1.8 ± 0.7°) were significantly larger than those in groups A and C, and the Group C setup required the shortest amount of time, at 1.5 ± 0.3 min, while that of Group B took the longest time, at 2.6 ± 0.9 min. Conclusion: SGRT one‐key calibration was found to be more suitable when followed by skin marker/tattoo and in‐room laser positioning, establishing it as an optimal daily initial set‐up protocol for breast DIBH radiotherapy. This modality also proved to be suitable for free‐breathing breast cancer radiotherapy, and its widespread clinical use is recommended. [ABSTRACT FROM AUTHOR]

Electrosurgical and ultrasonic devices are used in surgical procedures for hemostatic sealing and bisection of vascular tissues. Previous benchtop studies alternatively demonstrated successful infrared laser sealing and cutting of blood vessels, in a sequential, two-step approach. This study describes a smaller, laparoscopic device compatible design, and simultaneous approach to sealing and bisection of vessels, with potential optical feedback. A 1470-nm infrared diode laser sealed and bisected 40 porcine renal arteries, ex vivo. A reciprocating, side-firing, optical fiber, housed in a transparent square quartz optical chamber (2.7 × 2.7 × 25 mm outer dimensions), delivered laser energy over an 11 mm scan length, with a range of incident powers (41–59 W) and treatment times (5–21 s). Vessel diameters ranged from 2.5 to 4.8 mm. Vessel burst pressure measurements were performed on each cut end (n = 80) with success indicated by pressures exceeding 360 mmHg. All vessel ends were successfully sealed and bisected (80/80). The highest incident power, 59 W, yielded short treatment times of 5–6 s. Peak temperatures on the external chamber surface reached 103 oC. Time to cool down to body temperature measured 37 s. Infrared lasers simultaneously seal and bisect blood vessels, with treatment times comparable to, and temperatures and cooling times lower than reported for conventional devices. Future work will focus on integrating the fiber and chamber into a standard 5-mm-outer-diameter laparoscopic device. Customization of fiber scan length to match vessel size may also reduce laser energy deposition, enabling lower peak temperatures, treatment times, and cooling times. [ABSTRACT FROM AUTHOR]

The propagation of nonlinear waves, such as fires, weather fronts, and disease spread, has drawn attention since the dawn of time. A well-known example of nonlinear wave–fronts–in our daily lives is the domino waves, which propagate equally toward the left or right flank due to their reciprocal coupling. However, there are other situations where front propagation is not fully understood, such as bistable fronts with nonreciprocal coupling. These couplings are characterised by the fact that the energy emitter and receiver are not interchangeable. Here, we study the propagation of nonlinear waves in a bistable optical chain forced by nonreciprocal optical feedback. The spatiotemporal evolution and the front speeds are characterised as a function of the nonreciprocal coupling. We derive an equation to describe the interacting optical elements in a liquid crystal light valve with nonreciprocal optical feedback and compare the experimental results with numerical simulations of the coupled bistable systems. Understanding and harnessing nonlinear wave propagation has been a long-standing research topic in physics. In a controlled optical experiment, the authors realize a coupled bistable optical chain and study nonlinear wave propagation under nonreciprocal optical feedback, revealing unexpected behaviours of nonlinear wave propagation. [ABSTRACT FROM AUTHOR]

To robustly and adaptively reconstruct displacement, we propose the amplitude modulation integral reconstruction method (AM-IRM) for displacement sensing in a self-mixing interferometry (SMI) system. By algebraically multiplying the SMI signal with a high-frequency sinusoidal carrier, the frequency spectrum of the signal is shifted to that of the carrier. This operation overcomes the issue of frequency blurring in low-frequency signals associated with continuous wavelet transform (CWT), enabling the precise extraction of the Doppler frequency of the SMI signal. Furthermore, the synchrosqueezing wavelet transform (SSWT) is utilized to enhance the frequency resolution of the Doppler signal. Our experimental results demonstrate that the proposed method achieves a displacement reconstruction accuracy of 21.1 nm (0.89%). Additionally, our simulations demonstrated that this method can accurately reconstruct target displacement under the conditions of time-varying optical feedback intensity or a signal-to-noise ratio (SNR) of 0 dB, with a maximum root mean square (RMS) error of 22.2 nm. These results highlight its applicability in real-world environments. This method eliminates the need to manually determine the window length for time–frequency conversion, calculate the parameters of the SMI system, or add additional optical devices, making it easy to implement. [ABSTRACT FROM AUTHOR]

In this paper, an analysis of performance acceleration of an external laser source (ELS) model based polymer fiber gratings (PFGs) by reducing the turn-on delay time (TDelay) is successfully investigated numerically by optimizing model parameters. In contrast to all previous studies that relied either on approximate or experimental equations, the analysis was based on an exact numerical formula. The analysis is based on the investigation of the effect of diode injected current (Iin j), temperature (T), recombination rate coefficients (i.e. Anr, B, and C), and optical feedback (OFB) level. Results have demonstrated that by optimizing model parameters the Delay can be controlled and reduced effectively. [ABSTRACT FROM AUTHOR]

In this study, we investigate the dynamics of quantum dot lasers under optical feedback. In this system of rate equations, the output laser exhibits nonlinear behavior such as chaotic dynamics at different values of the parameters. Change parameters such injection current and optical feedback strength. Finding the frequencies with fast Fourier transform (FFT) for different values of parameters. The rate equation is solved numerically using the delay differential method (dde23) in the MAT LAB program. [ABSTRACT FROM AUTHOR]

The cloud feedback may result in amplification or damping of Arctic warming. Two common techniques used to diagnose the top‐of‐the‐atmosphere cloud feedback are the Adjusted Cloud Radiative Effect (AdjCRE) method and the Cloud Radiative Kernel (CRK) method. We apply both to CMIP5 and CMIP6 model data, finding that the AdjCRE calculated Arctic shortwave cloud feedback is twice as correlated with sea ice loss in CMIP5, and four times in CMIP6, as the CRK method. We find that the CRK method produces Arctic all‐sky residual percentages exceeding 20% in 15 of 18 models. We use the CRK method to decompose the feedback in CMIP5 and CMIP6 finding that its median value changed from negative to positive driven by a less‐negative cloud optical depth feedback. Despite its lack of closure, we conclude that the CRK method is better suited for Arctic SW feedbacks as it is less impacted by surface albedo changes. Plain Language Summary: The cloud feedback is the process by which cloud property changes in a warming climate can either further enhance warming or damp it. The Arctic is warming faster than the rest of the globe, and one of the largest sources of uncertainty in its climate projections is the cloud feedback. There are two popular methods to calculate the cloud feedback: the Adjusted Cloud Radiative Effect technique, and the Cloud Radiative Kernel technique. In this paper we compare the two methods in a suite of climate models by considering the extent to which changes in Arctic sea ice impact the cloud feedbacks. From this analysis we conclude that the Cloud Radiative Kernel method is less affected by sea ice loss. We then apply the Cloud Radiative Kernel technique to data from the two most recent generations of global climate models to investigate how polar day Arctic cloud feedbacks have changed between these generations. We find that the median value of these Arctic feedbacks is slightly positive in the newest generation of models, a change from slightly negative in the previous generation that is largely fueled by a weakening of the feedback associated with changes in cloud optical depth. Key Points: The Cloud Radiative Kernel method is less sensitive to surface albedo changes than the Adjusted Cloud Radiative Effect techniqueThe Cloud Radiative Kernel method provides poor radiative closure in a suite of global climate modelsThe median shortwave Arctic cloud feedback in recent climate models is slightly positive due to a weakened cloud optical depth feedback [ABSTRACT FROM AUTHOR]

An external-cavity laser with resonant optical feedback is a common and mature method to achieve narrow linewidth lasers. Since the proposal of optical feedback in 1964, a series of studies on resonant optical feedback have been reported. Although longer feedback length leads to narrower linewidth, it also introduces coupling of environmental noise and causes instability in the laser cavity, which is detrimental to high-speed tuning of the laser wavelength. With such a challenge, current research on resonant optical feedback primarily focuses on the static results of laser linewidth compression. In order to obtain narrow linewidth high-speed tuned external-cavity lasers, further research on the laser dynamics is required to obtain dynamic tuning of narrow linewidth external-cavity lasers. In this work, we construct an external-cavity laser based on resonant optical feedback, and utilize a coherent detection method to measure the dynamic process of laser linewidth compression and wavelength tuning. Based on resonant optical feedback from the external cavity, the linewidth of the main-cavity laser can be compressed from near 100 kHz to the 100 Hz level, with the frequency noise compressed from the order of 104 to the 102 Hz2/Hz level. Since the wavelength switching process includes frequency shift process, linewidth compression process, and frequency stabilization process, etc., we first conduct a research on laser linewidth compression dynamics. In the results of linewidth compression dynamics, we discover that using a shorter fiber ring results in shorter linewidth compression time, which is advantageous for laser dynamic tuning. We subsequently carry out the laser wavelength switching process with a main-cavity switching time in milliseconds. In the wavelength switching process, while undergoing the frequency shift process of fast tuning transient laser frequency, the laser first undergoes the linewidth broadening process, then enters the main-cavity laser frequency stabilization process and undergoes the linewidth compression process at the same time. The experimental results show that the 100 m feedback fiber ring will not significantly increase the external-cavity laser wavelength switching time under the condition that linewidth compression is faster than main-cavity laser switching, while a longer fiber ring will introduce a strong noise. Our work experimentally demonstrates that shorter feedback ring lengths lead to faster compression, which provides valuable insights for the development of high-speed and high-precision tunable narrow linewidth external-cavity lasers. [ABSTRACT FROM AUTHOR]

Nonlinear dynamics at mid-infrared wavelength is of interest for various applications but has been mainly limited to quantum cascade lasers so far. In this article, we show that interband cascade lasers can generate complex optical chaos with bandwidth in the GHz range and this outperforms the performances of quantum cascade laser chaos. The chaos nature of our signal is confirmed by a thorough time-series analysis. Modeling of the semiconductor laser under short-cavity external optical feedback allows confirming the high bias chaos operation that we observe experimentally. These results pave the way for applications at mid-infrared wavelength, such as private free-space communication. [ABSTRACT FROM AUTHOR]

The study of extreme events (EEs) in photonics has expanded significantly due to straightforward implementation conditions. EEs have not been discussed systematically, to the best of our knowledge, in the chaotic dynamics of a Fabry–Perot laser with optical feedback, so we address this in the current contribution. Herein, we not only find EEs in all modes but also divide the EEs in total output into two categories for further discussion. The two types of EEs have similar statistical features to conventional rogue waves. The occurrence probability of EEs undergoes a saturation effect as the feedback strength increases. Additionally, we analyze the influence of feedback strength, feedback delay, and pump current on the probability of EEs defined by two criteria of EEs and find similar trends. We hope that this work contributes to a deep understanding and serves as inspiration for further research into various multimode semiconductor laser systems. [ABSTRACT FROM AUTHOR]

This paper presents a chaotic system based on novel semiconductor nanolasers (NLs), systematically analyzing its chaotic region and investigating the influence of key parameters on the unpredictability of chaotic output. This study found that under optical feedback conditions, NLs generate chaos across a wide range of feedback parameters, with the highly unpredictable region completely overlapping with the chaotic region. Further injection into the slave lasers enhances the chaotic output, expanding the range of unpredictability. Additionally, we analyzed the impact of internal parameter mismatch on the complexity of chaotic signals and found it to be similar to the scenario when parameters are matched. Using this chaotic system as an entropy source, we constructed a random number generator (RNG) and investigated the effects of internal parameters mismatch and differences in the injection parameters on the generator's performance. The simulation results show that the RNG performs well under different parameter settings, and the generated random sequences pass all random number tests successfully. Therefore, this chaotic system can yield a high-complexity chaotic light source with appropriate parameter selection, and when combined with effective post-processing, it can generate high-quality random numbers. This is crucial for advancing the realization of small-sized, high-randomness RNGs. [ABSTRACT FROM AUTHOR]

Precision beam pointing plays a critical role in free-space optical communications terminals in uplink, downlink and inter-satellite link scenarios. Among the various methods of beam steering, the use of fast steering mirrors (FSM) is widely adopted, with many commercial solutions employing diverse technologies, particularly focusing on small, high-bandwidth mirrors. This paper introduces a method using lightweight, commercial off-the-shelf components to construct a custom closed-loop steering mirror platform, suitable for mirror apertures exceeding 100 mm. The approach involves integrating optical encoders into two off-the-shelf open-loop actuators. These encoders read the signal reflected on purposefully diamond-machined knurled screw knobs, providing maximum contrast between light and dark lines. The resulting steering mirror has the potential to complement or replace FSM in applications requiring a larger stroke, at the expense of motion speed. In the presented setup, the mirror tilt resolution achieved based on the encoder closed-loop signal feedback is 45 μ rad, with a mean slew rate of 1.5 mrad/s. Importantly, the steering assembly is self-locking, requiring no power to maintain a steady pointing angle. Using the mirror to actively correct for a constantly moving incoming beam, a 5-fold increase in concentration of the beam spot on the center of the detector was obtained compared to a fixed position mirror, demonstrating the mirrors ability to correct for satellite platform jitter and drift. [ABSTRACT FROM AUTHOR]

The surface temperature‐mediated change in cloud properties, referred to as the cloud feedback, continues to dominate the uncertainty in climate projections. A larger number of contemporary global climate models (GCMs) project a higher degree of warming than the previous generation of GCMs. This greater projected warming has been attributed to a less negative cloud feedback in the Southern Ocean. Here, we apply a novel "double decomposition method" that employs the "cloud radiative kernel" and "cloud regime" concepts, to two data sets of satellite observations to decompose the interannual cloud feedback into contributions arising from changes within and shifts between cloud morphologies. Our results show that contributions from the latter to the cloud feedback are large for certain regimes. We then focus on interpreting how both changes within and between cloud morphologies impact the shortwave cloud optical depth feedback over the Southern Ocean in light of additional observations. Results from the former cloud morphological changes reveal the importance of the wind response to warming increases low‐ and mid‐level cloud optical thickness in the same region. Results from the latter cloud morphological changes reveal that a general shift from thick storm‐track clouds to thinner oceanic low‐level clouds contributes to a positive feedback over the Southern Ocean that is offset by shifts from thinner broken clouds to thicker mid‐ and low‐level clouds. Our novel analysis can be applied to evaluate GCMs and potentially diagnose shortcomings pertaining to their physical parameterizations of particular cloud morphologies. Plain Language Summary: Climate models project that rising levels of greenhouse gas emissions will raise Earth's global mean surface air temperature. However, the amount of warming to be expected remains highly uncertain. A main underlying cause for this uncertainty is the representation of atmospheric clouds in these models. In particular, the response of clouds to global warming, known as the "cloud feedback" over the Southern Ocean has been linked to higher levels of projected warming. To address the uncertainty, we apply a novel method to two satellite data sets. This method teases apart contributions from changing cloud properties such as their horizontal spatial coverage and their ability to reflect sunlight, to the cloud feedback, and then further dissects each of these contributions into those arising from changes occurring both within groups of cloud types and changes occurring between these groups. Results suggest that a general shift from thick storm‐track clouds to thinner oceanic low‐level clouds exacerbates warming in the Southern Ocean but are partially counterbalanced by cloud thickening in part due to stronger near‐surface winds in the same region. Our novel methods and results can potentially be used to evaluate climate models and aid in tracing their shortcomings to poorly represented physical processes. Key Points: MODIS satellite observations indicate that in the Southern Ocean the interannual cloud optical depth feedback is slightly positiveMore frequently occurring thin low‐level clouds and fewer storm‐track clouds contribute to a positive feedback in the Southern OceanStrengthened near‐surface winds contribute to a negative low‐level cloud feedback in the Southern Ocean [ABSTRACT FROM AUTHOR]

The response of tropical high clouds to surface warming and their radiative feedbacks are uncertain. For example, it is uncertain whether their coverage will contract or expand in response to surface warming and whether such changes entail a stabilizing radiative feedback (iris feedback) or a neutral feedback. Global satellite observations with passive and active remote sensing capabilities over the last two decades can now be used to address such effects that were previously observationally limited. Using these observations, we show that the vertically averaged coverage exhibits no significant contraction or expansion. However, we find a reduction in coverage at the altitude where high clouds peak and are particularly radiatively‐relevant. This results in a negative longwave (LW) feedback and a positive shortwave (SW) feedback which cancel to yield a near‐zero high‐cloud amount feedback, providing observational evidence against an iris feedback. Next, we find that tropical high clouds have risen but have also warmed, leading to a positive, but small, high‐cloud altitude feedback dominated by the LW feedback. Finally, we find that high clouds have been thinning, leading to a near‐zero high‐cloud optical depth feedback from a cancellation between negative LW and positive SW feedbacks. Overall, high clouds lead the total tropical cloud feedback to be small due to the negative LW‐positive SW feedback cancellations. Plain Language Summary: Tropical high clouds can have both cooling and heating effects: by reflecting sunlight, they cool the planet and by preventing terrestrial radiation from escaping to space, they also heat the planet. Despite their influence on how much heat gets stored in the Earth system, there is a surprisingly poor understanding of how these clouds will respond to global warming. This uncertainty is largely due to the paucity of observational data. Now, however, instruments aboard satellites orbiting Earth have provided unprecedented data on the changes in the vertical structure of clouds as well as their heat impacts. Our work shows that the dominant signal in the satellite cloud record is the rise of high clouds in response to warming, not any net contraction of coverage. The high clouds are also found to be warming and thinning. Overall, these high cloud changes induce less reflection of sunlight and allow more terrestrial radiation to escape to space. However, these radiative effects cancel and altogether cause no significant heating impact in the tropics. Key Points: Tropical high clouds are rising, warming, thinning, and when vertically averaged, are not contractingTropical high clouds show a positive altitude radiative feedback and near‐zero optical depth and amount radiative feedbacks [ABSTRACT FROM AUTHOR]

The development of a 1.65 µm cavity ringdown methane spectrometer for methane isotope analysis is reported. In order to reduce the laser linewidth, simple optical feedback with an 11 m external fiber cavity using a retroreflector was implemented and it improved the sensitivity. The detection limit at the ppt level for both 12CH4 and 13CH4 concentrations at 100 Torr gas pressure was evaluated from the Allan–Werle plot calculated from the dataset obtained at the fixed laser frequency. In contrast, the detection limit estimated from the baseline noise on the absorption spectrum was a few ppb for both methane isotopologues due to the periodic background oscillations that remained even after baseline correction. The system demonstrated the direct measurement of ambient methane in atmospheric room air, and the estimated 13CH4 ratio as well as the methane concentration were in good agreement with the reference values of ambient air. [ABSTRACT FROM AUTHOR]

The immune regulation of the lymphatic system, especially the lymph node (LN), is of great significance for the treatment of diseases and the inhibition of pathogenic organisms spreading in the body. However, achieving precise spatiotemporal control of immune cell activation in LN in vivo remains a challenge due to tissue depth and off‐target effects. Furthermore, minimally invasive and real‐time feedback methods to monitor the regulation of the immune system in LN are lacking. Here, focused ultrasound responsive immunomodulator loaded nanoplatform (FURIN) with near‐infrared II (NIR‐II) luminescence is designed to achieve spatiotemporally controllable immune activation in LN in vivo. The NIR‐II persistent luminescence of FURIN can track its delivery in LN through bioimaging. Under focused ultrasound (FUS) stimulation, the immunomodulator encapsulated in FURIN can be released locally in the LN to activate immune cells such as dendritic cells and the NIR‐II mechanoluminescence of FURIN provides real‐time optical feedback signals for immune activation. This work points to a FUS mediated, spatiotemporal selective immune activation strategy in vivo with the feedback control of luminescence signals via ultrasound responsive nanocomposite, which is of great significance in improving the efficacy and reducing the side effect of immune regulation for the development of potential immunotherapeutic methods in the future. [ABSTRACT FROM AUTHOR]

Time-delayed optical feedback is known to trigger a wide variety of complex dynamical behavior in semiconductor lasers. Adding a second optical feedback loop is naturally expected to further increase the complexity of the system and its dynamics, but due to interference between the two feedback arms, it was also quickly identified as a way to improve the laser stability. While these two aspects have already been investigated, the influence of the feedback phases, i.e., sub-wavelength changes in the mirror positions, on the laser behavior still remains to be thoroughly studied, despite indications that this parameter could have a significant impact. Here, we analyze the effect of the feedback phase on the laser stability in a dual-feedback configuration. We show an increased sensitivity of the laser system to feedback phase changes when two-feedback loops are present and clarify the interplay between the frequency shift induced by the feedback and the interferometric effect between the two feedback arms. [ABSTRACT FROM AUTHOR]

Mid-infrared laser absorption spectroscopy utilizing a high-finesse optical cavity enables high precision trace analysis of gas molecules. In particular, optical detection of radiocarbon (14C) based on cavity ringdown spectroscopy using a quantum cascade laser (QCL) is gaining attention as an alternative to accelerator mass spectrometry. This paper reports a compact-packaged narrow-linewidth QCL system utilizing resonant optical feedback from an external V-shaped cavity. Based on frequency noise analysis, the derived laser linewidth is 44 kHz for 100 μs integration time with the capability to perform seamless frequency scanning around 10 GHz. We installed this laser system within a table-top cavity ringdown spectrometer for 14CO2. A single-shot detection limit of 1.2 × 10−9 cm−1 Hz−1/2 leading to a detectable abundance evaluated from a noise analysis of 0.2 in fraction modern 14C for a 10-s averaging time was achieved. This capability of rapid analysis for 14CO2 is suitable for various applications requiring trace 14C analysis. [ABSTRACT FROM AUTHOR]

Common-signal-induced synchronization of semiconductor lasers with optical feedback inspired a promising physical-layer key distribution with information-theoretic security and potential in high rate. A significant challenge is the requirement to shorten the synchronization recovery time for increasing the key rate without sacrificing the operation parameter space for security. Here, open-loop synchronization of wavelength-tunable multi-section distributed Bragg reflector lasers is proposed as a solution for physical-layer key distribution. Experiments show that the synchronization is sensitive to two operation parameters, i.e., currents of grating section and phase section. Furthermore, fast wavelength-shift keying synchronization can be achieved by direct modulation on one of the two currents. The synchronization recovery time is shortened by one order of magnitude compared to close-loop synchronization. An experimental implementation is demonstrated with a final key rate of 5.98 Mbit/s over 160 km optical fiber distance. It is thus believed that fast-tunable multi-section semiconductor lasers open a new avenue for a high-rate physical-layer key distribution using laser synchronization. [ABSTRACT FROM AUTHOR]

In this paper we report an improved method of coherent sensing through the use of a generalized phase-stepping algorithm to extract magnitude and phase information from interferometric fringes acquired by laser feedback interferometry (LFI). Our approach allows for significantly reduced optical sampling and acquisition times whilst also avoiding the need for fitting to complex models of lasers under optical feedback in post-processing. We investigate theoretically the applicability of this method under different levels of optical feedback, different laser parameters, and for different sampling conditions. We furthermore validate its use experimentally for LFI-based sensing using a terahertz (THz)-frequency laser in both far-field and near-field sensing configurations. Finally we demonstrate our approach for two-dimensional nanoscale imaging of the out-of-plane field supported by individual micro-resonators at THz frequencies. Our results show that fully coherent sensing can be achieved reliably with as little as 4 sampling points per imaging pixel, opening up opportunities for fast coherent sensing not only at THz frequencies but across the visible and infra-red spectrum. [ABSTRACT FROM AUTHOR]

The study examines an extensive and complete synchronization of optimal feedback with quantum dot semiconductor laser mutual coupling system. This has been achieved by resolving the transmitter and receiver equations of the quantum dot lasers. Numerous crisis areas have been observed at the time of investigating the relationship between photon density and time. The authors have selected an optimal time delay for the optical feedback so as to render an appropriate situation for intermittent dynamics. The study analyses the impact created by a long external cavity of QDSL upon the synchronization process in this mutual coupling system, in the presence of the enhancement factor of (α =3). [ABSTRACT FROM AUTHOR]