Search

Previously, some bacteria were shown to harbour enzymes capable of catalysing the oxidative cleavage of the double bond of t-anethole and related compounds. The cofactor dependence of these enzymes remained enigmatic due to a lack of biochemical information. We report on catalytic and structural details of a representative of this group of oxidative enzymes: t-anethole oxygenase from Stenotrophomonas maltophilia (TAO Sm ). The bacterial enzyme could be recombinantly expressed and purified, enabling a detailed biochemical study that has settled the dispute on its cofactor dependence. We have established that TAO Sm contains a tightly bound b-type heme and merely depends on dioxygen for catalysis. It was found to accept t-anethole, isoeugenol and O-methyl isoeugenol as substrates, all being converted into the corresponding aromatic aldehydes without the need of any cofactor regeneration. The elucidated crystal structure of TAO Sm has revealed that it contains a unique active site architecture that is conserved for this distinct class of heme-containing bacterial oxygenases. Similar to other hemoproteins, TAO Sm has a histidine (His121) as proximal ligand. Yet, unique for TAOs, an arginine (Arg89) is located at the distal axial position. Site directed mutagenesis confirmed crucial roles for these heme-liganding residues and other residues that form the substrate binding pocket. In conclusion, the results reported here reveal a new class of bacterial heme-containing oxygenases that can be used for the cleavage of alkene double bonds, analogous to ozonolysis in organic chemistry., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Flavin monooxygenases (FMOs) have been widely used in the biosynthesis of natural compounds due to their excellent stereoselectivity, regioselectivity and chemoselectivity. Stenotrophomonas maltophilia flavin monooxygenase (SmFMO) has been reported to catalyze the oxidation of various thiols to corresponding sulfoxides, but its activity is relatively low. Herein, we obtained a mutant SmFMO F52G which showed 4.35-fold increase in k cat /K m (4.96 mM -1 s -1 ) and 6.84-fold increase in enzyme activity (81.76 U/g) compared to the SmFMO WT (1.14 mM -1 s -1 and 11.95 U/g) through semi-rational design guided by structural analysis and catalytic mechanism combined with high-throughput screening. By forming hydrogen bond with O4 atom of FAD isoalloxazine ring and reducing steric hindrance, the conformation of FAD isoalloxazine ring in SmFMO F52G is more stable, and NADPH and substrate are closer to FAD isoalloxazine ring, shortening the distances of hydrogen transfer and substrate oxygenation, thereby increasing the rate of reduction and oxidation reactions and enhancing enzyme activity. Additionally, the overall structural stability and substrate binding capacity of the SmFMO F52G have significant improved than that of SmFMO WT . The strategy used in this study to improve the enzyme activity of FMOs may have generality, providing important references for the rational and semi-rational engineering of FMOs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Dhilirane-type meroterpenoids (DMs) featuring a 6/6/6/5/5 ring system represent a rare group of fungal meroterpenoids. To date, merely 11 DMs have been isolated or derived, leaving their chemical diversity predominantly unexplored. Herein, we leverage an understanding of biosynthesis to develop a workflow for discovery of DMs by genome mining, metabolite analysis, and tailoring enzyme catalysis. Twenty-three new DMs, including seven unprecedented scaffolds, were consequently identified. An α-ketoglutarate (α-KG)-dependent oxygenase DhiD was found to catalyze the stereodivergent ring contraction of dhilirolide D to form the dhilirane skeleton; while the cytochrome P450 DhiH reshaped the structural diversity by establishing diverse C-C bonds and oxidation. Crystallographic and mutagenesis experiments provide a molecular basis for the DhiD reaction and its stereodivergent products. Notably, DhiD exhibits substrate-controlled catalytic versatility in the chemical expansion of DMs through ring contraction, hydroxylation, dehydrogenation, epoxidation, isomerization, epimerization, and α-ketol cleavage. Bioassay results demonstrated that the obtained meroterpenoids exhibited anti-inflammatory and insecticidal activities. Our work provides insight into nature's arsenal for DM biosynthesis and the functional versatility of α-KG-dependent oxygenase and P450, which can be applied for target discovery and diversification of DM-type natural products.

A gene cluster responsible for the degradation of nicotinic acid (NA) in Bacillus niacini has recently been identified, and the structures and functions of the resulting enzymes are currently being evaluated to establish pathway intermediates. One of the genes within this cluster encodes a flavin monooxygenase (BnFMO) that is hypothesized to catalyze a hydroxylation reaction. Kinetic analyses of the recombinantly purified BnFMO suggest that this enzyme catalyzes the hydroxylation of 2,6-dihydroxynicotinic acid (2,6-DHNA) or 2,6-dihydroxypyridine (2,6-DHP), which is formed spontaneously by the decarboxylation of 2,6-DHNA. To understand the details of this hydroxylation reaction, we determined the structure of BnFMO using a multimodel approach combining protein X-ray crystallography and cryo-electron microscopy (cryo-EM). A liganded BnFMO cryo-EM structure was obtained in the presence of 2,6-DHP, allowing us to make predictions about potential catalytic residues. The structural data demonstrate that BnFMO is trimeric, which is unusual for Class A flavin monooxygenases. In both the electron density and coulomb potential maps, a region at the trimeric interface was observed that was consistent with and modeled as lipid molecules. High-resolution mass spectral analysis suggests that there is a mixture of phosphatidylethanolamine and phosphatidylglycerol lipids present. Together, these data provide insights into the molecular details of the central hydroxylation reaction unique to the aerobic degradation of NA in Bacillus niacini .

Rieske dioxygenases have a long history of being utilized as green chemical tools in the organic synthesis of high-value compounds, due to their capacity to perform the cis-dihydroxylation of a wide variety of aromatic substrates. The practical utility of these enzymes has been hampered however by steric and electronic constraints on their substrate scopes, resulting in limited reactivity with certain substrate classes. Herein, we report the engineering of a widely used member of the Rieske dioxygenase class of enzymes, toluene dioxygenase (TDO), to produce improved variants with greatly increased activity for the cis-dihydroxylation of benzoates. Through rational mutagenesis and screening, TDO variants with substantially improved activity over the wild-type enzyme were identified. Homology modeling, docking studies, molecular dynamics simulations, and substrate tunnel analysis were applied in an effort to elucidate how the identified mutations resulted in improved activity for this polar substrate class. These analyses revealed modification of the substrate tunnel as the likely cause of the improved activity observed with the best-performing enzyme variants., (© 2024 Wiley Periodicals LLC.)

Alkane monooxygenase (AlkB) is a membrane-spanning metalloenzyme that catalyzes the terminal hydroxylation of straight-chain alkanes involved in the microbially mediated degradation of liquid alkanes. According to the cryoEM structures, AlkB features a unique multihistidine ligand coordination environment with a long Fe-Fe distance in its active center. Up to now, how AlkB employs the diiron center to activate dioxygen and which species is responsible for triggering the hydroxylation are still elusive. In this work, we constructed computational models and performed quantum mechanics/molecular mechanics (QM/MM) calculations to illuminate the electronic characteristics of the diiron active center and how AlkB carries out the terminal hydroxylation. Our calculations revealed that the spin-spin interaction between two irons is rather weak. The dioxygen may ligate to either the Fe1 or Fe2 atom and prefers to act as a linker to increase the spin-spin interaction of two irons, facilitating the dioxygen cleavage to generate the highly reactive Fe(IV)═O. Thus, AlkB employs Fe(IV)═O to trigger the hydrogen abstraction. In addition, the previously suggested mechanism that AlkB uses both the dioxygen and Fe-coordinated water to perform hydroxylation was calculated to be unlikely. Besides, our results indicate that AlkB cannot use the Fe-coordinated dioxygen to directly trigger hydrogen abstraction.

Flavin-containing monooxygenase from Methylophaga sp. ( m FMO) was previously discovered to be a valuable biocatalyst used to convert small amines, such as trimethylamine, and various indoles. As FMOs are also known to act on sulfides, we explored m FMO and some mutants thereof for their ability to convert prochiral aromatic sulfides. We included a newly identified thermostable FMO obtained from the bacterium Nitrincola lacisaponensis ( Ni FMO). The FMOs were found to be active with most tested sulfides, forming chiral sulfoxides with moderate-to-high enantioselectivity. Each enzyme variant exhibited a different enantioselective behavior. This shows that small changes in the substrate binding pocket of m FMO influence selectivity, representing a tunable biocatalyst for enantioselective sulfoxidations.

N -Acetylnorloline synthase (LolO) is one of several iron(II)- and 2-oxoglutarate-dependent (Fe/2OG) oxygenases that catalyze sequential reactions of different types in the biosynthesis of valuable natural products. LolO hydroxylates C2 of 1- exo -acetamidopyrrolizidine before coupling the C2-bonded oxygen to C7 to form the tricyclic loline core. Each reaction requires cleavage of a C-H bond by an oxoiron(IV) (ferryl) intermediate; however, different carbons are targeted, and the carbon radicals have different fates. Prior studies indicated that the substrate-cofactor disposition (SCD) controls the site of H · abstraction and can affect the reaction outcome. These indications led us to determine whether a change in SCD from the first to the second LolO reaction might contribute to the observed reactivity switch. Whereas the single ferryl complex in the C2 hydroxylation reaction was previously shown to have typical Mössbauer parameters, one of two ferryl complexes to accumulate during the oxacyclization reaction has the highest isomer shift seen to date for such a complex and abstracts H · from C7 ∼ 20 times faster than does the first ferryl complex in its previously reported off-pathway hydroxylation of C7. The detectable hydroxylation of C7 in competition with cyclization by the second ferryl complex is not enhanced in 2 H 2 O solvent, suggesting that the C2 hydroxyl is deprotonated prior to C7-H cleavage. These observations are consistent with the coordination of the C2 oxygen to the ferryl complex, which may reorient its oxo ligand, the substrate, or both to positions more favorable for C7-H cleavage and oxacyclization.

Particulate MMO (pMMO) catalyzes the oxidation of methane to methanol and also ammonia to hydroxylamine. Experimental characterization of the active site has been very difficult partly because the enzyme is membrane-bound. However, recently, there has been major progress mainly through the use of cryogenic electron microscopy (cryoEM). Electron paramagnetic resonance (EPR) and X-ray spectroscopy have also been employed. Surprisingly, the active site has only one copper. There are two histidine ligands and one asparagine ligand, and the active site is surrounded by phenyl alanines but no charged amino acids in the close surrounding. The present study is the first quantum chemical study using a model of that active site (Cu D ). Low barrier mechanisms have been found, where an important part is that there are two initial proton-coupled electron transfer steps to a bound O 2 ligand before the substrate enters. Surprisingly, this leads to large radical character for the oxygens even though they are protonated. That result is very important for the ability to accept a proton from the substrates. Methods have been used which have been thoroughly tested for redox enzyme mechanisms.

Structure-guided engineering of a CHMO from Amycolatopsis methanolica (AmCHMO) was performed for asymmetric sulfoxidation activity and stereoselectivity toward omeprazole sulfide. Initially, combinatorial active-site saturation test (CASTing) and iteratively saturation mutagenesis (ISM) were performed on 5 residues at the "bottleneck" of substrate tunnel, and MT3 was successfully obtained with a specific activity of 46.19 U/g and R-stereoselectivity of 99 % toward OPS. Then, 4 key mutations affecting the stereoselectivity were identified through multiple rounds of ISM on residues at the substrate binding pocket region, resulting MT8 with an inversed stereoselectivity from 99 % (R) to 97 % (S). MT8 has a greatly compromised specific activity of 0.08 U/g. By introducing additional beneficial mutations, MT11 was constructed with significantly increased specific activity of 2.29 U/g and stereoselectivity of 97 % (S). Enlarged substrate tunnel is critical to the expanded substrate spectrum of AmCHMO, while reshaping of substrate binding pocket is important for stereoselective inversion. Based on MD simulation, pre-reaction states of MT3-OPS proR , MT8-OPS proS , and MT11-OPS proS were calculated to be 45.56 %, 17.94 %, and 28.65 % respectively, which further confirm the experimental data on activity and stereoselectivity. Our results pave the way for engineering distinct activity and stereoselectivity of BVMOs toward bulky prazole thioethers., (© 2024 Wiley-VCH GmbH.)

A versatile and robust end-group derivatization approach using oximes has been developed for the detection of oxidative degradation of synthetic polyisoprenes and polybutadiene. This method demonstrates broad applicability, effectively monitoring degradation across a wide molecular weight range through ultraviolet (UV)-detection coupled to gel permeation chromatography. Importantly, it enables the effective monitoring of degradation via derivatization-induced UV-maximum shifts, even in the presence of an excess of undegraded polyene, overcoming limitations previously reported with refractive index detectors. Notably, this oxime-based derivatization methodology is used in enzymatic degradation experiments of synthetic polyisoprenes characterized by a cis: trans ratio with the rubber oxygenase Lcp K30 . It reveals substantial UV absorption in derivatized enzymatic degradation products of polyisoprene with molecular weights exceeding 1000 g mol -1 - an unprecedented revelation for this enzyme's activity on such synthetic polyisoprenes. This innovative approach holds promise as a valuable tool for advancing research into the degradation of synthetic polyisoprenes and polybutadiene, particularly under conditions of low organocatalytic or enzymatic degradation activity. With its broad applicability and capacity to reveal previously hidden degradation processes, it represents a noteworthy contribution to sustainable polymer chemistry., (© 2024 The Authors. Macromolecular Rapid Communications published by Wiley‐VCH GmbH.)

Rieske nonheme iron aromatic ring-hydroxylating oxygenases (RHOs) play pivotal roles in determining the substrate preferences of polycyclic aromatic hydrocarbon (PAH) degraders. However, their potential to degrade high molecular weight PAHs (HMW-PAHs) has been relatively unexplored. NarA2B2 is an RHO derived from a thermophilic Hydrogenibacillus sp. strain N12. In this study, we have identified four "hotspot" residues (V236, Y300, W316, and L375) that may hinder the catalytic capacity of NarA2B2 when it comes to HMW-PAHs. By employing structure-guided rational enzyme engineering, we successfully modified NarA2B2, resulting in NarA2B2 variants capable of catalyzing the degradation of six different types of HMW-PAHs, including pyrene, fluoranthene, chrysene, benzo[a]anthracene, benzo[b]fluoranthene, and benzo[a]pyrene. Three representative variants, NarA2B2 W316I , NarA2B2 Y300F-W316I , and NarA2B2 V236A-W316I-L375F , not only maintain their abilities to degrade low-molecular-weight PAHs (LMW-PAHs) but also exhibited 2 to 4 times higher degradation efficiency for HMW-PAHs in comparison to another isozyme, NarAaAb. Computational analysis of the NarA2B2 variants predicts that these modifications alter the size and hydrophobicity of the active site pocket making it more suitable for HMW-PAHs. These findings provide a comprehensive understanding of the relationship between three-dimensional structure and functionality, thereby opening up possibilities for designing improved RHOs that can be more effectively used in the bioremediation of PAHs., Competing Interests: Conflict of interest The authors declare no competing interests., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

One-pot biosynthesis of vanillin from ferulic acid without providing energy and cofactors adds significant value to lignin waste streams. However, naturally evolved carotenoid cleavage oxygenase (CCO) with extreme catalytic conditions greatly limited the above pathway for vanillin bioproduction. Herein, CCO from Thermothelomyces thermophilus ( Tt CCO) was rationally engineered for achieving high catalytic activity under neutral pH conditions and was further utilized for constructing a one-pot synthesis system of vanillin with Bacillus pumilus ferulic acid decarboxylase. Tt CCO with the K192N-V310G-A311T-R404N-D407F-N556A mutation ( Tt CCO M3 ) was gradually obtained using substrate access channel engineering, catalytic pocket engineering, and pocket charge engineering. Molecular dynamics simulations revealed that reducing the site-blocking effect in the substrate access channel, enhancing affinity for substrates in the catalytic pocket, and eliminating the pocket's alkaline charge contributed to the high catalytic activity of Tt CCO M3 under neutral pH conditions. Finally, the one-pot synthesis of vanillin in our study could achieve a maximum rate of up to 6.89 ± 0.3 mM h -1 . Therefore, our study paves the way for a one-pot biosynthetic process of transforming renewable lignin-related aromatics into valuable chemicals.

The MbnBC enzyme complex converts cysteine residues in a peptide substrate, MbnA, to oxazolone/thioamide groups during the biosynthesis of copper chelator methanobactin (Mbn). MbnBC belongs to the mixed-valent diiron oxygenase (MVDO) family, of which members use an Fe(II)Fe(III) cofactor to react with dioxygen for substrate modification. Several crystal structures of the inactive Fe(III)Fe(III) form of MbnBC alone and in complex with MbnA have been reported, but a mechanistic understanding requires determination of the oxidation states of the crystallographically observed Fe ions in the catalytically active Fe(II)Fe(III) state, along with the site of MbnA binding. Here, we have used electron nuclear double resonance (ENDOR) spectroscopy to determine such structural and electronic properties of the active site, in particular, the mode of substrate binding to the MV state, information not accessible by X-ray crystallography alone. The oxidation states of the two Fe ions were determined by 15 N ENDOR analysis. The presence and locations of both bridging and terminal exogenous solvent ligands were determined using 1 H and 2 H ENDOR. In addition, 2 H ENDOR using an isotopically labeled MbnA substrate indicates that MbnA binds to the Fe(III) ion of the cluster via the sulfur atom of its N -terminal modifiable cysteine residue, with displacement of a coordinated solvent ligand as shown by complementary 1 H ENDOR. These results, which underscore the utility of ENDOR in studying MVDOs, provide a molecular picture of the initial steps in Mbn biosynthesis.

Extradiol dioxygenases (EDOs) catalyzing meta-cleavage of catecholic compounds promise an effective way to detoxify aromatic pollutants. This work reported a novel scenario to engineer our recently identified Type I EDO from Tcu3516 for a broader substrate scope and enhanced activity, which was based on 2,3-dihydroxybiphenyl (2,3-DHB)-liganded molecular docking of Tcu3516 and multiple sequence alignment with other 22 Type I EDOs. 11 non-conservative residues of Tcu3516 within 6 Å distance to the 2,3-DHB ligand center were selected as potential hotspots and subjected to semi-rational design using 6 catecholic analogues as substrates; the mutants V186L and V212N returned with progressive evolution in substrate scope and catalytic activity. Both mutants were combined with D285A for construction of double mutants and final triple mutant V186L/V212N/D285A. Except for 2,3-DHB (the mutant V186L/D285A gave the best catalytic performance), the triple mutant prevailed all other 5 catecholic compounds for their degradation; affording the catalytic efficiency k cat /K m value increase by 10-30 folds, protein T m (structural rigidity) increase by 15 °C and the half-life time enhancement by 10 times compared to the wild type Tcu3516. The molecular dynamic simulation suggested that a stabler core and a more flexible entrance are likely accounting for enhanced catalytic activity and stability of enzymes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

SznF, a member of the emerging family of heme-oxygenase-like (HO-like) di-iron oxidases and oxygenases, employs two distinct domains to catalyze the conversion of N ω -methyl-L-arginine (L-NMA) into N-nitroso-containing product, which can subsequently be transformed into streptozotocin. Using unrestricted density functional theory (UDFT) with the hybrid functional B3LYP, we have mechanistically investigated the two sequential hydroxylations of L-NMA catalyzed by SznF's binuclear iron central domain. Mechanism B primarily involves the O-O bond dissociation, forming Fe(IV)=O, induced by the H + /e - introduction to the Fe A side of μ-1,2-peroxo-Fe 2 (III/III), the substrate hydrogen abstraction by Fe(IV)=O, and the hydroxyl rebound to the substrate N radical. The stochastic addition of H + /e - to the Fe B side (mechanism C) can transition to mechanism B, thereby preventing enzyme deactivation. Two other competing mechanisms, involving the direct O-O bond dissociation (mechanism A) and the addition of H 2 O as a co-substrate (mechanism D), have been ruled out., (© 2024 Wiley‐VCH GmbH.)

Rieske non-heme iron oxygenases are ubiquitously expressed in prokaryotes. These enzymes catalyze a wide variety of reactions, including cis-dihydroxylation, mono-hydroxylation, sulfoxidation, and demethylation. They contain a Rieske-type [2Fe-2S] cluster and an active site with a mono-nuclear iron bound to a 2-His carboxylate triad. Naphthalene 1,2 dioxygenase, a representative of this family, catalyzes the conversion of naphthalene to (+)-cis-(1R,2S)-dihydroxy-1,2-dihydronaphthalene. This transformation requires naphthalene, two electrons, and an oxygen molecule. The first structure of the terminal oxygenase component of a Rieske non-heme iron oxygenase to be determined was naphthalene 1,2 dioxygenase (NDO-O). In this article, we describe in detail the methods used to recombinantly express and purify NDO-O in rich and minimal salts media, the crystallization of NDO-O for structure determination by X-ray crystallography, the challenges faced, and the methods used for the preparation of enzyme ligand complexes. The methods used here resulted in the determination of several NDO-O complexes with aromatic substrates, nitric oxide, oxygen molecule, and products, leading to an initial understanding of the mechanism of enzyme catalysis and the molecular determinants of the regio- and stereo-specificity of this class of enzymes., (Copyright © 2024. Published by Elsevier Inc.)

α-Ketoglutarate-dependent non-heme iron (α-KG NHI) oxygenases compose one of the largest superfamilies of tailoring enzymes that play key roles in structural and functional diversifications. During the biosynthesis of meroterpenoids, α-KG NHI oxygenases catalyze diverse types of chemical reactions, including hydroxylation, desaturation, epoxidation, endoperoxidation, ring-cleavage, and skeletal rearrangements. Due to their catalytic versatility, keen attention has been focused on functional analyses of α-KG NHI oxygenases. This chapter provides detailed methodologies for the functional analysis of the fungal α-KG NHI oxygenase SptF, which plays an important role in the structural diversification of andiconin-derived meroterpenoids. The procedures included describe how to prepare the meroterpenoid substrate using a heterologous fungal host, measure the in vitro enzymatic activity of SptF, and how to perform structural and mutagenesis studies on SptF. These protocols are also applicable to functional analyses of other α-KG NHI oxygenases., (Copyright © 2024. Published by Elsevier Inc.)

Extradiol dioxygenases are a class of non-heme iron-dependent enzymes found in eukaryotes and prokaryotes that play a vital role in the aerobic catabolism of aromatic compounds. They are generally divided into three evolutionarily independent superfamilies with different protein folds. Our recent studies have shed light on the catalytic mechanisms and structure-function relationships of two specific extradiol dioxygenases: 3-hydroxyanthranilate-3,4-dioxygenase, a Type III enzyme essential in mammals for producing a precursor for nicotinamide adenine dinucleotide, and L-3,4-dihydroxyphenylalanine dioxygenase, an uncommon form of Type I enzymes involved in natural product biosynthesis. This work details the expression and isolation methods for these extradiol dioxygenases and introduces approaches to achieve homogeneity and high occupancy of the enzyme metal centers. Techniques such as ultraviolet-visible and electron paramagnetic resonance spectroscopies, as well as oxygen electrode measurements, are discussed for probing the interaction of the non-heme iron center with ligands and characterizing enzymatic activities. Moreover, protein crystallization has been demonstrated as a powerful tool to study these enzymes. We highlight in crystallo reactions and single-crystal spectroscopic methods to further elucidate enzymatic functions and protein dynamics., (Copyright © 2024. Published by Elsevier Inc.)

Oxazinomycin is a C-nucleoside natural product characterized by a 1,3-oxazine ring linked to ribose via a C-C glycosidic bond. Construction of the 1,3-oxazine ring depends on the activity of OzmD, which is a mononuclear non-heme iron-dependent enzyme from a family of enzymes that contain a domain of unknown function (DUF) 4243. OzmD catalyzes an unusual oxidative ring rearrangement of a pyridine derivative that releases cyanide as a by-product in the final stage of oxazinomycin biosynthesis. The intrinsic sensitivity of the OzmD substrate to oxygen along with the oxygen dependency of catalysis presents significant challenges in conducting in vitro enzymatic assays. This chapter describes the detailed procedures that have been used to characterize OzmD, including protein preparation, activity assays, and reaction by-product identification., (Copyright © 2024. Published by Elsevier Inc.)

Rieske non-heme iron-dependent oxygenases (ROs) are a versatile group of enzymes traditionally associated with the degradation of aromatic xenobiotics. In addition, ROs have been found to play key roles in natural product biosynthesis, displaying a wide catalytic diversity with typically high regio- and stereo- selectivity. However, the detailed characterization of ROs presents formidable challenges due to their complex structural and functional properties, including their multi-component composition, cofactor dependence, and susceptibility to reactive oxygen species. In addition, the substrate availability of natural product biosynthetic intermediates, the limited solubility of aromatic hydrocarbons, and the radical-mediated reaction mechanism can further complicate functional assays. Despite these challenges, ROs hold immense potential as biocatalysts for pharmaceutical applications and bioremediation. Using cumene dioxygenase (CDO) from Pseudomonas fluorescens IP01 as a model enzyme, this chapter details techniques for characterizing ROs that oxyfunctionalize aromatic hydrocarbons. Moreover, potential pitfalls, anticipated complications, and proposed solutions for the characterization of novel ROs are described, providing a framework for future RO research and strategies for studying this enzyme class. In particular, we describe the methods used to obtain CDO, from construct design to expression conditions, followed by a purification procedure, and ultimately activity determination through various activity assays., (Copyright © 2024. Published by Elsevier Inc.)

The Rieske non-heme iron oxygenases (Rieske oxygenases) comprise a class of metalloenzymes that are involved in the biosynthesis of complex natural products and the biodegradation of aromatic pollutants. Despite this desirable catalytic repertoire, industrial implementation of Rieske oxygenases has been hindered by the multicomponent nature of these enzymes and their requirement for expensive reducing equivalents in the form of a reduced nicotinamide adenine dinucleotide cosubstrate (NAD(P)H). Fortunately, however, some Rieske oxygenases co-occur with accessory proteins, that through a downstream reaction, recycle the needed NAD(P)H for catalysis. As these pathways and accessory proteins are attractive for bioremediation applications and enzyme engineering campaigns, herein, we describe methods for assembling Rieske oxygenase pathways in vitro. Further, using the TsaMBCD pathway as a model system, in this chapter, we provide enzymatic, spectroscopic, and crystallographic methods that can be adapted to explore both Rieske oxygenases and their co-occurring accessory proteins., (Copyright © 2024. Published by Elsevier Inc.)

The biotechnological potential of Rieske Oxygenases (ROs) and their cognate reductases remains unmet, in part because these systems can be functionally short-lived. Here, we describe a set of experiments aimed at identifying both the functional and structural stability limitations of ROs, using terephthalate (TPA) dioxygenase (from Comamonas strain E6) as a model system. Successful expression and purification of a cofactor-complete, histidine-tagged TPA dioxygenase and reductase protein system requires induction with the Escherichia coli host at stationary phase as well as a chaperone inducing cold-shock and supplementation with additional iron, sulfur, and flavin. The relative stability of the Rieske cluster and mononuclear iron center can then be assessed using spectroscopic and functional measurements following dialysis in an iron chelating buffer. These experiments involve measurements of the overall lifetime of the system via total turnover number using both UV-Visible absorbance and HPLC analyses, as well specific activity as a function of temperature. Important methods for assessing the stability of these multi-cofactor, multi-protein dependent systems at multiple levels of structure (secondary to quaternary) include differential scanning calorimetry, circular dichroism, and metallospectroscopy. Results can be rationalized in terms of three-dimensional structures and bioinformatics. The experiments described here provide a roadmap to a detailed characterization of the limitations of ROs. With a few notable exceptions, these issues are not widely addressed in current literature., (Copyright © 2024. Published by Elsevier Inc.)

Rieske oxygenases are known as catalysts that enable the cleavage of aromatic and aliphatic C-H bonds in structurally diverse biomolecules and recalcitrant organic environmental pollutants through substrate oxygenations and oxidative heteroatom dealkylations. Yet, the unproductive O 2 activation, which is concomitant with the release of reactive oxygen species (ROS), is typically not taken into account when characterizing Rieske oxygenase function. Even if considered an undesired side reaction, this O 2 uncoupling allows for studying active site perturbations, enzyme mechanisms, and how enzymes evolve as environmental microorganisms adapt their substrates to alternative carbon and energy sources. Here, we report on complementary methods for quantifying O 2 uncoupling based on mass balance or kinetic approaches that relate successful oxygenations to total O 2 activation and ROS formation. These approaches are exemplified with data for two nitroarene dioxygenases (nitrobenzene and 2-nitrotoluene dioxygenase) which have been shown to mono- and dioxygenate substituted nitroaromatic compounds to substituted nitrobenzylalcohols and catechols, respectively., Competing Interests: Competing interests The authors declare no competing interests., (Copyright © 2024. Published by Elsevier Inc.)

Oxygenases catalyze crucial reactions throughout all domains of life, cleaving molecular oxygen (O 2 ) and inserting one or two of its atoms into organic substrates. Many oxygenases, including those in the cytochrome P450 (P450) and Rieske oxygenase enzyme families, function as multicomponent systems, which require one or more redox partners to transfer electrons to the catalytic center. As the identity of the reductase can change the reactivity of the oxygenase, characterization of the latter with its cognate redox partners is critical. However, the isolation of the native redox partner or partners is often challenging. Here, we report the preparation and characterization of PbdB, the native reductase partner of PbdA, a bacterial P450 enzyme that catalyzes the O-demethylation of para-methoxylated benzoates. Through production in a rhodoccocal host, codon optimization, and anaerobic purification, this procedure overcomes conventional challenges in redox partner production and allows for robust oxygenase characterization with its native redox partner. Key lessons learned here, including the value of production in a related host and rare codon effects are applicable to a broad range of Fe-dependent oxygenases and their components., (Copyright © 2024. Published by Elsevier Inc.)

Rieske-type non-heme iron oxygenases (ROs) are an important family of non-heme iron enzymes. They catalyze a diverse range of transformations in secondary metabolite biosynthesis and xenobiotic bioremediation. ROs typically shuttle electrons from NAD(P)H to the oxygenase component via reductase component(s). This chapter describes our recent biochemical characterization of stachydrine demethylase Stc2 from Sinorhizobium meliloti. In this work, the eosin Y/sodium sulfite pair serves as the photoreduction system to replace the NAD(P)H-reductase system. We describe Stc2 protein purification and quality control details as well as a flow-chemistry to separate the photo-reduction half-reaction and the oxidation half-reaction. Our study demonstrates that the eosin Y/sodium sulfite photo-reduction pair is a NAD(P)H-reductase surrogate for Stc2-catalysis in a flow-chemistry setting. Experimental protocols used in this light-driven Stc2 catalysis are likely to be applicable as a photo-reduction system for other redox enzymes., (Copyright © 2024. Published by Elsevier Inc.)

Methanotrophs are environmentally friendly microorganisms capable of converting gas to liquid using methane monooxygenases (MMOs). In addition to methane-to-methanol conversion, MMOs catalyze the conversion of alkanes to alcohols and alkenes to epoxides. Herein, the efficacy of epoxidation by type I and II methanotrophs was investigated, and type II methanotrophs were observed to be more efficient in converting alkenes to epoxides. Subsequently, three (Epoxide hydrolase) EHs of different origins were overexpressed in the type II methanotroph Methylosinus trichosporium OB3b to produce 1,2-diols from epoxide. Methylosinus trichosporium OB3b expressing Caulobacter crescentus EH produced the highest amount of (R)-1,2-propanediol (251.5 mg/L) from 1-propene. These results demonstrate the possibility of using methanotrophs as a microbial platform for diol production and the development of a continuous bioreactor for industrial applications., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Co-oxidation of a range of alkenes, dienes, and aromatic compounds by whole cells of the isoprene-degrading bacterium Rhodococcus sp. AD45 expressing isoprene monooxygenase was investigated, revealing a relatively broad substrate specificity for this soluble diiron centre monooxygenase. A range of 1-alkynes (C 2 -C 8 ) were tested as potential inhibitors. Acetylene, a potent inhibitor of the related enzyme soluble methane monooxygenase, had little inhibitory effect, whereas 1-octyne was a potent inhibitor of isoprene monooxygenase, indicating that 1-octyne could potentially be used as a specific inhibitor to differentiate between isoprene consumption by bona fide isoprene degraders and co-oxidation of isoprene by other oxygenase-containing bacteria, such as methanotrophs, in environmental samples. The isoprene oxidation kinetics of a variety of monooxygenase-expressing bacteria were also investigated, revealing that alkene monooxygenase from Xanthobacter and soluble methane monooxygenases from Methylococcus and Methylocella, but not particulate methane monooxygenases from Methylococcus or Methylomicrobium, could co-oxidise isoprene at appreciable rates. Interestingly the ammonia monooxygenase from the nitrifier Nitrosomonas europaea could also co-oxidise isoprene at relatively high rates, suggesting that co-oxidation of isoprene by additional groups of bacteria, under the right conditions, might occur in the environment., (© 2023 The Authors. Environmental Microbiology Reports published by Applied Microbiology International and John Wiley & Sons Ltd.)

Mononuclear nonheme iron enzymes catalyze a large variety of oxidative transformations responsible for various biosynthesis and metabolism processes. Unlike their P450 counterparts, non-heme enzymes generally possess flexible and variable coordination architecture, which can endow rich reactivity for non-heme enzymes. This Concept highlights that the coordination dynamics of iron can be a key player in controlling the activity and selectivity of non-heme enzymes. In ergothioneine synthase EgtB, the coordination switch of the sulfoxide radical species enables the efficient and selective C-S coupling reaction. In iron(II)- and 2-oxoglutarate-dependent (Fe/2OG) oxygenases, the conformational flip of ferryl-oxo intermediate can be extensively involved in selective oxidation reactions. Especially, the five-coordinate ferryl-oxo species may allow the substrate coordination via O or N atom, which may facilitate the C-O or C-N coupling reactions via stabilizing the transition states and inhibiting the unwanted hydroxylation reactions., (© 2023 Wiley-VCH GmbH.)

Rieske nonheme iron oxygenases use two metallocenters, a Rieske-type [2Fe-2S] cluster and a mononuclear iron center, to catalyze oxidation reactions on a broad range of substrates. These enzymes are widely used by microorganisms to degrade environmental pollutants and to build complexity in a myriad of biosynthetic pathways that are industrially interesting. However, despite the value of this chemistry, there is a dearth of understanding regarding the structure-function relationships in this enzyme class, which limits our ability to rationally redesign, optimize, and ultimately exploit the chemistry of these enzymes. Therefore, in this work, by leveraging a combination of available structural information and state-of-the-art protein modeling tools, we show that three "hotspot" regions can be targeted to alter the site selectivity, substrate preference, and substrate scope of the Rieske oxygenase p -toluenesulfonate methyl monooxygenase (TsaM). Through mutation of six to 10 residues distributed between three protein regions, TsaM was engineered to behave as either vanillate monooxygenase (VanA) or dicamba monooxygenase (DdmC). This engineering feat means that TsaM was rationally engineered to catalyze an oxidation reaction at the meta and ortho positions of an aromatic substrate, rather than its favored native para position, and that TsaM was redesigned to perform chemistry on dicamba, a substrate that is not natively accepted by the enzyme. This work thus contributes to unlocking our understanding of structure-function relationships in the Rieske oxygenase enzyme class and expands foundational principles for future engineering of these metalloenzymes.

Monooxygenases, an important class of enzymes, have been the subject of enzyme engineering due to their high activity and versatile substrate scope. Reactions performed by these biocatalysts have long been monitored by a colorimetric method involving the coupling of a dye precursor to naphthalene hydroxylation products generated by the enzyme. Despite the popularity of this method, we found the dye product to be unstable, preventing quantitative readout. By incorporating an extraction step to solubilize the dye produced, we have improved this assay to the point where quantitation of enzyme activity is possible. Further, by incorporating spectral deconvolution, we have, for the first time, enabled independent quantification of the two possible regioisomeric products: 1-naphthol and 2-naphthol. Previously, such analysis was only possible with chromatographic separation, increasing the cost and complexity of analysis. The efficacy of our improved workflow was evaluated by monitoring the activity of a toluene-4-monooxygenase enzyme from Pseudomonas mendocina KR-1. Our colorimetric regioisomer quantification was found to be consistent with chromatographic analysis by HPLC. The development and validation of a quantitative colorimetric assay for monooxygenase activity that enables regioisomeric distinction and quantification represents a significant advance in analytical methods to monitor enzyme activity. By maintaining facile, low-cost, high-throughput readout while incorporating quantification, this assay represents an important alternative to more expensive chromatographic quantification techniques., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Chlorophyllide a oxygenase (CAO) is responsible for converting chlorophyll a to chlorophyll b in a two-step oxygenation reaction. CAO belongs to the family of Rieske-mononuclear iron oxygenases. Although the structure and reaction mechanism of other Rieske monooxygenases have been described, a member of plant Rieske non-heme iron-dependent monooxygenase has not been structurally characterized. The enzymes in this family usually form a trimeric structure and electrons are transferred between the non-heme iron site and the Rieske center of the adjoining subunits. CAO is supposed to form a similar structural arrangement. However, in Mamiellales such as Micromonas and Ostreococcus, CAO is encoded by two genes where non-heme iron site and Rieske cluster localize on the distinct polypeptides. It is not clear if they can form a similar structural organization to achieve the enzymatic activity. In this study, the tertiary structures of CAO from the model plant Arabidopsis thaliana and the Prasinophyte Micromonas pusilla were predicted by deep learning-based methods, followed by energy minimization and subsequent stereochemical quality assessment of the predicted models. Furthermore, the chlorophyll a binding cavity and the interaction of ferredoxin, which is the electron donor, on the surface of Micromonas CAO were predicted. The electron transfer pathway was predicted in Micromonas CAO and the overall structure of the CAO active site was conserved even though it forms a heterodimeric complex. The structures presented in this study will serve as a basis for understanding the reaction mechanism and regulation of the plant monooxygenase family to which CAO belongs., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Enzyme engineering plays a central role in the development of biocatalysts for biotechnology, chemical and pharmaceutical manufacturing, and environmental remediation. Rational design of proteins has historically relied on targeting active site residues to confer a protein with desirable catalytic properties. However, additional "hotspots" are also known to exist beyond the active site. Structural elements such as subunit-subunit interactions, entrance tunnels, and flexible loops influence enzyme catalysis and serve as potential "hotspots" for engineering. For the Rieske oxygenases, which use a Rieske cluster and mononuclear iron center to catalyze a challenging set of reactions, these outside of the active site regions are increasingly being shown to drive catalytic outcomes. Therefore, here, we highlight recent work on structurally characterized Rieske oxygenases that implicates architectural pieces inside and outside of the active site as key dictators of catalysis, and we suggest that these features may warrant attention in efforts aimed at Rieske oxygenase engineering., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Jennifer Bridwell-Rabb is a co-editor for the Biocatalysis and Biotransformation issue., (Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The development of mild, efficient, and enantioselective methods for preparing chiral fluorinated compounds has been a long-standing challenge. Herein, we report a promiscuous cyclohexanone monooxygenase (CHMO) for the photoinduced synthesis of chiral α-fluoroketones via enantioselective reductive dehalogenation of α,α-halofluoroketones. Wild-type CHMO from Acinetobacter sp. possesses this promiscuous ability innately; however, the yield and stereoselectivity are low. A structure-guided rational design of CHMO improved the yield and stereoselectivity remarkably. Mechanistic studies and molecular simulations demonstrated that this photoinduced CHMO catalyzes the reductive dehalogenation via a novel electron transfer (ET)/proton transfer (PT) mechanism, distinct from that of previously reported reductases with similar promiscuity. This methodology was expanded to various substrates, and desirable chiral α-fluoroketones were obtained in high yields (up to 99 %) and e.r. values (up to 99:1)., (© 2022 Wiley-VCH GmbH.)

The biodegradation of rubber materials is considered as a sustainable recycling alternative, highlighting the use of microorganisms and enzymes in oxidative processes of natural rubber. Currently, the main challenge is the treatment of rubber materials such as waste tyres, where the mixture of rubber polymers with different additives and the cross-linked structure obtained due to the vulcanisation process positions them as highly persistent materials. This study characterises the degradation of different rubber-containing substrates in in vivo and in vitro processes using the bacterium Rhodococcus rhodochrous and the oxygenase latex clearing protein (Lcp) from the same strain. For the first time, the degradation of polyisoprene particles in liquid cultures of R. rhodochrous was analysed, obtaining up to 19.32% mass loss of the polymer when using it as the only carbon source. Scanning electron microscopy analysis demonstrated surface alteration of pure polyisoprene and vulcanised rubber particles after 2 weeks of incubation. The enzyme Lcp RR was produced in bioreactors under rhamnose induction and its activity characterised in oxygen consumption assays at different enzyme concentrations. A maximum consumption of 28.38 µmol O2 /min was obtained by adding 100 µg/mL Lcp RR to a 2% (v/v) latex emulsion as substrate. The bioconversion of natural rubber into reaction degradation products or oligoisoprenoids was calculated to be 32.54%. Furthermore, the mass distribution of the oligoisoprenoids was analysed by liquid chromatography coupled to mass spectrometry (LC-MS) and 17 degradation products, ranging from C20 to C100 oligoisoprenoids, were identified. The multi-enzymatic degradation capacity of R. rhodochrous positions it as a model microorganism in complex degradation processes such as in the case of tyre waste., (© 2022. The Author(s), under exclusive licence to Springer Nature B.V.)

Fungal meroterpenoids are structurally diverse natural products with important biological activities. During their biosynthesis, α-ketoglutarate-dependent oxygenases (αKG-DOs) catalyze a wide range of chemically challenging transformation reactions, including desaturation, epoxidation, oxidative rearrangement, and endoperoxide formation, by selective C-H bond activation, to produce molecules with more complex and divergent structures. Investigations on the structure-function relationships of αKG-DO enzymes have revealed the intimate molecular bases of their catalytic versatility and reaction mechanisms. Notably, the catalytic repertoire of αKG-DOs is further expanded by only subtle changes in their active site and lid-like loop-region architectures. Owing to their remarkable biocatalytic potential, αKG-DOs are ideal candidates for future chemoenzymatic synthesis and enzyme engineering for the generation of terpenoids with diverse structures and biological activities., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Gut microbial production of trimethylamine (TMA) from l-carnitine is directly linked to cardiovascular disease. TMA formation is facilitated by carnitine monooxygenase, which was proposed as a target for the development of new cardioprotective compounds. Therefore, the molecular understanding of the two-component Rieske-type enzyme from Escherichia coli was intended. The redox cofactors of the reductase YeaX (FMN, plant-type [2Fe-2S] cluster) and of the oxygenase YeaW (Rieske-type [2Fe-2S] and mononuclear [Fe] center) were identified. Compounds meldonium and the garlic-derived molecule allicin were recently shown to suppress microbiota-dependent TMA formation. Based on two independent carnitine monooxygenase activity assays, enzyme inhibition by meldonium or allicin was demonstrated. Subsequently, the molecular interplay of the reductase YeaX and the oxygenase YeaW was addressed. Chimeric carnitine monooxygenase activity was efficiently reconstituted by combining YeaX (or YeaW) with the orthologous oxygenase CntA (or reductase CntB) from Acinetobacter baumannii. Partial conservation of the reductase/oxygenase docking interface was concluded. A structure guided mutagenesis approach was used to further investigate the interaction and electron transfer between YeaX and YeaW. Based on AlphaFold structure predictions, a total of 28 site-directed variants of YeaX and YeaW were kinetically analyzed. Functional relevance of YeaX residues Arg271, Lys313 and Asp320 was concluded. Concerning YeaW, a docking surface centered around residues Arg83, Lys104 and Lys117 was hypothesized. The presented results might contribute to the development of TMA-lowering strategies that could reduce the risk for cardiovascular disease., (© 2022 The Author(s).)

This work investigated the structural and electronic properties of the copper mononuclear site of the PmoB part of the pMMO enzyme at the molecular level. We propose that the Cu B catalytic site in the soluble portion of pMMO at room temperature and under physiological conditions is a mononuclear copper complex in a distorted octahedral arrangement with the residues His 33 , His 137 , and His 139 on the equatorial base and two water molecules on the axial axis. Our view was based on the molecular dynamics results and DFT calculations of the electronic paramagnetic resonance parameters and comparisons with experimental EPR data. This new proposed model for the Cu B site brings additional support concerning the recent experimental evidence, which pointed out that a saturated coordination sphere of the copper ion in the Cu B center is an essential factor that makes it less efficient than the Cu C site in the methane oxidation. Therefore, according to the Cu B site model proposed here, an additional step involving a displacement of at least one water molecule of the copper coordination sphere by the O 2 molecule prior to its activation must be necessary. This scenario is less likely to occur in the Cu C center once this one is buried in the alpha-helices, which are part of the pMMO structure bound to the membrane wall, and consequently located in a less solvent-exposed region. In addition, we also present a simple and efficient sequential S-MD/CPKS protocol to compute EPR parameters that can, in principle, be expanded for the study of other copper-containing proteins.

Proteins of the HD-domain superfamily employ a conserved histidine-aspartate (HD) dyad to coordinate diverse metallocofactors. While most known HD-domain proteins are phosphohydrolases, new additions to this superfamily have emerged such as oxygenases and lyases, expanding their functional repertoire. To date, three HD-domain oxygenases have been identified, all of which employ a mixed-valent Fe II Fe III cofactor to activate their substrates and utilize molecular oxygen to afford cleavage of C-C or C-P bonds via a diferric superoxo intermediate. Phylogenetic analysis reveals an uncharacterized multidomain protein in the pathogenic soil fungus Fonsecaea multimorphosa , herein designated PhoF. PhoF consists of an N-terminal Fe II /α-ketoglutarate-dependent domain resembling that of PhnY and a C-terminal HD-domain like that of PhnZ. PhnY and PhnZ are part of an organophosphonate degradation pathway in which PhnY hydroxylates 2-aminoethylphosphonic acid, and PhnZ cleaves the C-P bond of the hydroxylated product yielding phosphate and glycine. Employing electron paramagnetic resonance and Mössbauer spectroscopies in tandem with activity assays, we determined that PhoF carries out the O 2 -dependent degradation of two aminophosphonates, demonstrating an expanded catalytic efficiency with respect to the individual, but mechanistically coupled PhnY and PhnZ. Our results recognize PhoF as a new example of an HD-domain oxygenase and show that domain fusion of an organophosphonate degradation pathway may be a strategy for disease-causing fungi to acquire increased functional versatility, potentially important for their survival.

Non-canonical heme oxygenases are enzymes that degrade heme to non-biliverdin products within bacterial heme iron acquisition pathways. These enzymes all contain a conserved second-sphere Trp residue that is essential for enzymatic turnover. Here, UV/Vis absorption (Abs) and circular dichroism (CD) spectroscopies were employed to show that the W67F variant of IsdG perturbs the heme substrate conformation. In general, a dynamic equilibrium between "planar" and "ruffled" substrate conformations exists within non-canonical heme oxygenases, and that the second-sphere Trp favors population of the "ruffled" substrate conformation. 1 H nuclear magnetic resonance and magnetic CD spectroscopies were used to characterize the electronic structures of IsdG and IsdI variants with different substrate conformational distributions. These data revealed that the "ruffled" substrate conformation promotes partial porphyrin-to‑iron electron transfer, which makes the meso carbons of the porphyrin ring susceptible to radical attack. Finally, UV/Vis Abs spectroscopy was utilized to quantify the enzymatic rates, and electrospray ionization mass spectrometry was used to identify the product distributions, for variants of IsdG with altered substrate conformational distributions. In general, the rate of heme oxygenation by non-canonical heme oxygenases depends upon the population of the "ruffled" substrate conformation. Also, the production of staphylobilin or mycobilin by these enzymes is correlated with the population of the "ruffled" substrate conformation, since variants that favor population of the "planar" substrate conformation yield significant amounts of biliverdin. These data can be understood within the framework of a concerted rearrangement mechanism for the monooxygenation of heme to meso-hydroxyheme by non-canonical heme oxygenases., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The enzyme BesC from the β - e thynyl-l- s erine biosynthetic pathway in Streptomyces cattleya fragments 4-chloro-l-lysine (produced from l-Lysine by BesD) to ammonia, formaldehyde, and 4-chloro-l-allylglycine and can analogously fragment l-Lys itself. BesC belongs to the emerging family of O 2 -activating non-heme-diiron enzymes with the "heme-oxygenase-like" protein fold (HDOs). Here, we show that the binding of l-Lys or an analogue triggers capture of O 2 by the protein's diiron(II) cofactor to form a blue μ-peroxodiiron(III) intermediate analogous to those previously characterized in two other HDOs, the olefin-installing fatty acid decarboxylase, UndA, and the guanidino- N -oxygenase domain of SznF. The ∼5- and ∼30-fold faster decay of the intermediate in reactions with 4-thia-l-Lys and (4 RS )-chloro-dl-lysine than in the reaction with l-Lys itself and the primary deuterium kinetic isotope effects (D-KIEs) on decay of the intermediate and production of l-allylglycine in the reaction with 4,4,5,5-[ 2 H 4 ]-l-Lys suggest that the peroxide intermediate or a reversibly connected successor complex abstracts a hydrogen atom from C4 to enable olefin formation. Surprisingly, the sluggish substrate l-Lys can dissociate after triggering intermediate formation, thereby allowing one of the better substrates to bind and react. The structure of apo BesC and the demonstrated linkage between Fe(II) and substrate binding suggest that the triggering event involves an induced ordering of ligand-providing helix 3 (α3) of the conditionally stable HDO core. As previously suggested for SznF, the dynamic α3 also likely initiates the spontaneous degradation of the diiron(III) product cluster after decay of the peroxide intermediate, a trait emerging as characteristic of the nascent HDO family.

The hydroxylation of methane (CH 4 ) is crucial to the field of environmental microbiology, owing to the heat capacity of methane, which is much higher than that of carbon dioxide (CO 2 ). Soluble methane monooxygenase (sMMO), a member of the bacterial multicomponent monooxygenase (BMM) superfamily, is essential for the hydroxylation of specific substrates, including hydroxylase (MMOH), regulatory component (MMOB), and reductase (MMOR). The diiron active site positioned in the MMOH α-subunit is reduced through the interaction of MMOR in the catalytic cycle. The electron transfer pathway, however, is not yet fully understood due to the absence of complex structures with reductases. A type II methanotroph, Methylosinus sporium 5, successfully expressed sMMO and hydroxylase, which were purified for the study of the mechanisms. Studies on the MMOH-MMOB interaction have demonstrated that Tyr76 and Trp78 induce hydrophobic interactions through π-π stacking. Structural analysis and sequencing of the ferredoxin domain in MMOR (MMOR-Fd) suggested that Tyr93 and Tyr95 could be key residues for electron transfer. Mutational studies of these residues have shown that the concentrations of flavin adenine dinucleotide (FAD) and iron ions are changed. The measurements of dissociation constants (K d s) between hydroxylase and mutated reductases confirmed that the binding affinities were not significantly changed, although the specific enzyme activities were significantly reduced by MMOR-Y93A. This result shows that Tyr93 could be a crucial residue for the electron transfer route at the interface between hydroxylase and reductase.

Bacterial methane oxidation using the enzyme particulate methane monooxygenase (pMMO) contributes to the removal of environmental methane, a potent greenhouse gas. Crystal structures determined using inactive, detergent-solubilized pMMO lack several conserved regions neighboring the proposed active site. We show that reconstituting pMMO in nanodiscs with lipids extracted from the native organism restores methane oxidation activity. Multiple nanodisc-embedded pMMO structures determined by cryo-electron microscopy to 2.14- to 2.46-angstrom resolution reveal the structure of pMMO in a lipid environment. The resulting model includes stabilizing lipids, regions of the PmoA and PmoC subunits not observed in prior structures, and a previously undetected copper-binding site in the PmoC subunit with an adjacent hydrophobic cavity. These structures provide a revised framework for understanding and engineering pMMO function.

Rieske dioxygenases belong to the non-heme iron family of oxygenases and catalyze important cis-dihydroxylation as well as O-/N-dealkylation and oxidative cyclization reactions for a wide range of substrates. The lack of substrate coordination at the non-heme ferrous iron center, however, makes it particularly challenging to delineate the role of the substrate for productive O 2 activation. Here, we studied the role of the substrate in the key elementary reaction leading to O 2 activation from a theoretical perspective by systematically considering (i) the 6-coordinate to 5-coordinate conversion of the non-heme Fe II upon abstraction of a water ligand, (ii) binding of O 2 , and (iii) transfer of an electron from the Rieske cluster. We systematically evaluated the spin-state-dependent reaction energies and structural effects at the active site for all combinations of the three elementary processes in the presence and absence of substrate using naphthalene dioxygenase as a prototypical Rieske dioxygenase. We find that reaction energies for the generation of a coordination vacancy at the non-heme Fe II center through thermoneutral H 2 O reorientation and exothermic O 2 binding prior to Rieske cluster oxidation are largely insensitive to the presence of naphthalene and do not lead to formation of any of the known reactive Fe-oxygen species. By contrast, the role of the substrate becomes evident after Rieske cluster oxidation and exclusively for the 6-coordinate non-heme Fe II sites in that the additional electron is found at the substrate instead of at the iron and oxygen atoms. Our results imply an allosteric control of the substrate on Rieske dioxygenase reactivity to happen prior to changes at the non-heme Fe II in agreement with a strategy that avoids unproductive O 2 activation., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Natural products are usually highly complicated organic molecules with special scaffolds, and they are an important resource in medicine. Natural products with complicated structures are produced by enzymes, and this is still a challenging research field, its mechanisms requiring detailed methods for elucidation. Flavin adenine dinucleotide (FAD)-dependent monooxygenases (FMOs) catalyze many oxidation reactions with chemo-, regio-, and stereo-selectivity, and they are involved in the synthesis of many natural products. In this review, we introduce the mechanisms for different FMOs, with the classical FAD (C4a)-hydroperoxide as the major oxidant. We also summarize the difference between FMOs and cytochrome P450 (CYP450) monooxygenases emphasizing the advantages of FMOs and their specificity for substrates. Finally, we present examples of FMO-catalyzed synthesis of natural products. Based on these explanations, this review will expand our knowledge of FMOs as powerful enzymes, as well as implementation of the FMOs as effective tools for biosynthesis.

The azoxy compounds with an intriguing chemical bond [-N=N + (-O - )-] are known to have broad applications in many industries. Our previous work revealed that a nonheme diiron N-oxygenase AzoC catalyzed the oxidization of amino-group to its nitroso analogue in the formation of azoxy bond in azoxymycins biosynthesis. However, except for the reported pyridine alkaloid azoxy compounds, most azoxy bonds of nitrogen heterocycles have not been biosynthesized so far, and the substrate scope of AzoC is limited to p -aminobenzene-type compounds. Therefore, it is very meaningful to use AzoC to realize the biosynthesis of azoxy nitrogen heterocycles compounds. In this work, we further studied the catalytic potential of AzoC toward nitrogen heterocycle substrates including 5-aminopyrimidine and 5-aminopyridine compounds to form new azoxy compounds through directed evolution. We constructed a double mutant L101I/Q104R via molecular engineering with improved catalytic efficiency toward 2-methoxypyrimidin-5-amine. These mutations also proved to be beneficial for N-oxygenation of methyl 5-aminopyrimidine-2-carboxylate. The structural analysis showed that relatively shorter distance between the substrate and the diiron center and amino acid residues of the active center may be responsible for the improvement of catalytic efficiency in L101I/Q104R. Our results provide a molecular basis for broadening the AzoC catalytic activity and its application in the biosynthesis of azoxy six-membered nitrogen catenation compounds.

A bis(μ-oxo)diiron(IV,IV) complex as a model for intermediate Q in the methane monooxygenase reaction cycle has been prepared. The precursor complex with a [Fe III Fe IV (μ-O) 2 ] core was fully characterized by X-ray crystallography and other spectroscopic analyses and was converted to the [Fe IV 2 (μ-O) 2 ] complex via electrochemical oxidation at 1000 mV (vs Ag/Ag + ) in acetone at 193 K. The UV-vis spectral features, Mössbauer parameters (Δ E Q = 2.079 mm/s and δ = -0.027 mm/s), and EXAFS analysis (Fe-O/N = 1.73/1.96 Å and Fe···Fe = 2.76 Å) support the structure of the low-spin ( S = 1, for each Fe) [Fe IV 2 (μ-O) 2 ] core. The rate constants of the hydrogen abstraction reaction from 9,10-dihydroanthracene at 243 K suggest the high reactivity of these synthetic bis(μ-oxo)diiron complexes supported by simple N4 tripodal ligand.

Rieske oxygenases exploit the reactivity of iron to perform chemically challenging C-H bond functionalization reactions. Thus far, only a handful of Rieske oxygenases have been structurally characterized and remarkably little information exists regarding how these enzymes use a common architecture and set of metallocenters to facilitate a diverse range of reactions. Herein, we detail how two Rieske oxygenases SxtT and GxtA use different protein regions to influence the site-selectivity of their catalyzed monohydroxylation reactions. We present high resolution crystal structures of SxtT and GxtA with the native β-saxitoxinol and saxitoxin substrates bound in addition to a Xenon-pressurized structure of GxtA that reveals the location of a substrate access tunnel to the active site. Ultimately, this structural information allowed for the identification of six residues distributed between three regions of SxtT that together control the selectivity of the C-H hydroxylation event. Substitution of these residues produces a SxtT variant that is fully adapted to exhibit the non-native site-selectivity and substrate scope of GxtA. Importantly, we also found that these selectivity regions are conserved in other structurally characterized Rieske oxygenases, providing a framework for predictively repurposing and manipulating Rieske oxygenases as biocatalysts., (© 2022. The Author(s).)

Herein are described substrate oxidations with H 2 O 2 catalyzed by [Fe II (IndH)(CH 3 CN) 3 ](ClO 4 ) 2 [IndH = 1,3-bis(2'-pyridylimino)isoindoline], involving a spectroscopically characterized (μ-oxo)(μ-1,2-peroxo)diiron(III) intermediate ( 2 ) that is capable of olefin epoxidation and alkane hydroxylation including cyclohexane. Species 2 also converts ketones to lactones with a decay rate dependent on [ketone], suggesting direct nucleophilic attack of the substrate carbonyl group by the peroxo species. In contrast, peroxo decay is unaffected by the addition of olefins or alkanes, but the label from H 2 18 O is incorporated into the the epoxide and alcohol products, implicating a high-valent iron-oxo oxidant that derives from O-O bond cleavage of the peroxo intermediate. These results demonstrate an ambiphilic diferric-peroxo intermediate that mimics the range of oxidative reactivities associated with O 2 -activating nonheme diiron enzymes.

Full activity of soluble methane monooxygenase (sMMO) depends upon the formation of a 1:1 complex of the regulatory protein MMOB with each alpha subunit of the (αβγ) 2 hydroxylase, sMMOH. Previous studies have shown that mutations in the core region of MMOB and in the N- and C-termini cause dramatic changes in the rate constants for steps in the sMMOH reaction cycle. Here, X-ray crystal structures are reported for the sMMOH complex with two double variants within the core region of MMOB, DBL1 (N107G/S110A), and DBL2 (S109A/T111A), as well as two variants in the MMOB N-terminal region, H33A and H5A. DBL1 causes a 150-fold decrease in the formation rate constant of the reaction cycle intermediate P , whereas DBL2 accelerates the reaction of the dinuclear Fe(IV) intermediate Q with substrates larger than methane by three- to fourfold. H33A also greatly slows P formation, while H5A modestly slows both formation of Q and its reactions with substrates. Complexation with DBL1 or H33A alters the position of sMMOH residue R245, which is part of a conserved hydrogen-bonding network encompassing the active site diiron cluster where P is formed. Accordingly, electron paramagnetic resonance spectra of sMMOH:DBL1 and sMMOH:H33A complexes differ markedly from that of sMMOH:MMOB, showing an altered electronic environment. In the sMMOH:DBL2 complex, the position of M247 in sMMOH is altered such that it enlarges a molecular tunnel associated with substrate entry into the active site. The H5A variant causes only subtle structural changes despite its kinetic effects, emphasizing the precise alignment of sMMOH and MMOB required for efficient catalysis.