Search

Color centers in diamond are promising platforms for quantum technologies. Most color centers in diamond discovered thus far emit in the visible or near-infrared wavelength range, which are incompatible with long-distance fiber communication and unfavorable for imaging in biological tissues. Here, we report the experimental observation of a new color center that emits in the telecom O-band, which we observe in silicon-doped bulk single crystal diamonds and microdiamonds. Combining absorption and photoluminescence measurements, we identify a zero-phonon line at 1221 nm and phonon replicas separated by 42 meV. Using transient absorption spectroscopy, we measure an excited state lifetime of around 270 ps and observe a long-lived baseline that may arise from intersystem crossing to another spin manifold.

Nanodiamonds are at the heart of a plethora of emerging applications in areas ranging from nanocomposites and tribology to nanomedicine and quantum sensing. The development of alternative synthesis methods, a better understanding, and the availability of ultrasmall nanodiamonds of less than 3 nm size with a precisely engineered composition, including the particle surface and atomic defects in the diamond crystal lattice, would mark a leap forward for many existing and future applications. Yet today, we are unable to accurately control nanodiamond composition at the atomic scale, nor can we reliably create and isolate particles in this size range. In this perspective, we discuss recent advances, challenges, and opportunities in the synthesis, characterization, and application of ultrasmall nanodiamonds. We particularly focus on the advantages of bottom-up synthesis of these particles and critically assess the physicochemical properties of ultrasmall nanodiamonds, which significantly differ from those of larger particles and bulk diamond.

Indium nitride (InN) has been of significant interest for creating and studying two-dimensional electron gases (2DEG). Herein we demonstrate the formation of 2DEGs in ultrathin doped and undoped 2D InN nanosheets featuring high carrier mobilities at room temperature. The synthesis is carried out via a two-step liquid metal-based printing method followed by a microwave plasma-enhanced nitridation reaction. Ultrathin InN nanosheets with a thickness of ∼2 ± 0.2 nm were isolated over large areas with lateral dimensions exceeding centimeter scale. Room temperature Hall effect measurements reveal carrier mobilities of ∼216 and ∼148 cm

Glycosylation is arguably the most important functional post-translational modification in brain cells and abnormal cell surface glycan expression has been associated with neurological diseases and brain cancers. In this study we developed a novel method for uptake of fluorescent nanodiamonds (FND), carbon-based nanoparticles with low toxicity and easily modifiable surfaces, into brain cell subtypes by targeting their glycan receptors with carbohydrate-binding lectins. Lectins facilitated uptake of 120 nm FND with nitrogen-vacancy centers in three types of brain cells - U87-MG astrocytes, PC12 neurons and BV-2 microglia cells. The nanodiamond/lectin complexes used in this study target glycans that have been described to be altered in brain diseases including sialic acid glycans

Fluorescent nanodiamonds (fNDs) are emerging as important tools for imaging and sensing in biology, which enable the optical detection, for example, of temperature and magnetic fields at the nanoscale. At the same time, their unique physicochemical properties allow fNDs to drastically improve the properties of nanocomposites. Here, we report the integration of fNDs into electrospun poly-ϵ-caprolactone (PCL) fibers and the use of the resulting hybrid material as a nontoxic and multifunctional bioscaffold. We investigate the morphology, size distribution, optical properties, wettability, and biocompatibility of PCL fibers containing 0.2 and 0.4 wt % fNDs and demonstrate the quantum sensing capability of the nanocomposite via optically detected magnetic resonance measurements of the nitrogen-vacancy center in fNDs. We find that the use of ethanol as a cosolvent improves the dispersion of fNDs into PCL fibers and reduces the occurrence of fiber defects. We demonstrate that the PCL/fND scaffold is not cytotoxic for mesenchymal stem cells and even promotes cell adhesion and cell proliferation up to 21 days because of an increase in wettability compared to pure PCL fibers. Our results highlight the immense potential of PCL/fND nanocomposites as smart bioscaffolds for advanced biomedical applications such as tissue engineering, biosensing, and theranostics.

The capabilities of imaging technologies, fluorescent sensors, and optogenetics tools for cell biology are advancing. In parallel, cellular reprogramming and organoid engineering are expanding the use of human neuronal models in vitro. This creates an increasing need for tissue culture conditions better adapted to live-cell imaging. Here, we identify multiple caveats of traditional media when used for live imaging and functional assays on neuronal cultures (i.e., suboptimal fluorescence signals, phototoxicity, and unphysiological neuronal activity). To overcome these issues, we develop a neuromedium called BrainPhys™ Imaging (BPI) in which we optimize the concentrations of fluorescent and phototoxic compounds. BPI is based on the formulation of the original BrainPhys medium. We benchmark available neuronal media and show that BPI enhances fluorescence signals, reduces phototoxicity and optimally supports the electrical and synaptic activity of neurons in culture. We also show the superior capacity of BPI for optogenetics and calcium imaging of human neurons. Altogether, our study shows that BPI improves the quality of a wide range of fluorescence imaging applications with live neurons in vitro while supporting optimal neuronal viability and function., Current media for neuronal cell and organoid cultures are suboptimal for functional imaging and optogenetics experiments, owing to phototoxicity and unphysiological performance. Here the authors formulate an optimised neuronal medium to support live cell imaging and electrophysiological activity.

Durable, sensitive, wearable electronics are highly desirable for monitoring everything from vital signs to athletic performance. However, electronic textiles with excellent function stability comf...

Diamond-based implant materials make up an emerging research area where the materials could be prepared to promote cellular functions, decrease bacteria attachment, and be suitable for potential in situ imaging. Up until now, diamond implants have been fabricated using coating technologies or embedding diamond nanoparticles in polymer matrices. Here we demonstrated a method of manufacturing diamond implants using laser cladding technology to 3D print a composite of diamond and fused titanium material. Using this method, we could prepare composite scaffolds of up to 50% diamond, which has never been achieved before. We next investigated the interfacial properties of these scaffolds for potential applications in implants. The addition of diamond to the biomaterial results in a 30% decrease in the water contact angle, making the scaffolds more hydrophilic and improving cellular adhesion and proliferation.

Diamond nitrogen-vacancy (NV) centers constitute a promising class of quantum nanosensors owing to the unique magneto-optic properties associated with their spin states. The large surface area and photostability of diamond nanoparticles, together with their relatively low synthesis costs, make them a suitable platform for the detection of biologically relevant quantities such as paramagnetic ions and molecules in solution. Nevertheless, their sensing performance in solution is often hampered by poor signal-to-noise ratios and long acquisition times due to distribution inhomogeneities throughout the analyte sample. By concentrating the diamond nanoparticles through an intense microcentrifugation effect in an acoustomicrofluidic device, we show that the resultant dense NV ensembles within the diamond nanoparticles give rise to an order-of-magnitude improvement in the measured acquisition time. The ability to concentrate nanoparticles under surface acoustic wave (SAW) microcentrifugation in a sessile droplet is, in itself, surprising given the well-documented challenge of achieving such an effect for particles below 1 μm in dimension. In addition to a demonstration of their sensing performance, we thus reveal in this work that the reason why the diamond nanoparticles readily concentrate under the SAW-driven recirculatory flow can be attributed to their considerably higher density and hence larger acoustic contrast compared to those for typical particles and cells for which the SAW microcentrifugation flow has been shown to date.

Detonation nanodiamonds (DNDs) are becoming increasingly important in science and technology with applications from drug delivery to tribology. DNDs are known to self-assemble into fractal-like aggregates in water, but their colloidal properties remain poorly understood. Here, the effect of salt and particle concentration on the size and shape of these aggregates is investigated using dynamic light scattering and small-angle X-ray scattering. Our results suggest the existence of two particle aggregate populations with diameters on the scale of 50 nm and 300 nm, respectively. The concentration of NaCl, in the range 0.005–1 mM, does not have a significant effect on the size or shape of the particle aggregates. The hydrodynamic radius of both aggregate populations decreases as the DND concentration increases from 0.01 to 2 mg mL−1. At the same time, the particle aggregates become denser and their overall shape changes from disk-like to rod-like with increasing DND concentration. We identify unexpected similarities between the aggregate structures observed for DNDs and those commonly observed for concentrated colloidal particles in high salt environments, described by classical colloid aggregation theories. Our results contribute to the fundamental understanding of the colloidal properties of DNDs and pave the way for the engineering of novel nanoparticle-based systems that make use of DNDs’ unique colloidal properties for future applications.

Open Access funding enabled and organized by CAUL and its Member Institutions KRD is supported by a Mid-Career Fellowship from the Hospital Research Foundation (C-MCF-58–2019). KD is supported by funding from the UK Engineering and Physical Sciences Research Council (EP/P030017/1) and the Australian Research Council (FL210100099). CC acknowledges the support of a PhD scholarship jointly from the University of Adelaide and University of Nottingham. This study was funded by the Australian Research Council Centre of Excellence for Nanoscale BioPhotonics (CE140100003). PR acknowledges funding through the RMIT Vice-Chancellor’s Research Fellowship and ARC DECRA Fellowship scheme (DE200100279). Purpose A current focus of the IVF field is non-invasive imaging of the embryo to quantify developmental potential. Such approaches use varying wavelengths to gain maximum biological information. The impact of irradiating the developing embryo with discrete wavelengths of light is not fully understood. Here, we assess the impact of a range of wavelengths on the developing embryo. Methods Murine preimplantation embryos were exposed daily to wavelengths within the blue, green, yellow, and red spectral bands and compared to an unexposed control group. Development to blastocyst, DNA damage, and cell number/allocation to blastocyst cell lineages were assessed. For the longer wavelengths (yellow and red), pregnancy/fetal outcomes and the abundance of intracellular lipid were investigated. Results Significantly fewer embryos developed to the blastocyst stage when exposed to the yellow wavelength. Elevated DNA damage was observed within embryos exposed to blue, green, or red wavelengths. There was no effect on blastocyst cell number/lineage allocation for all wavelengths except red, where there was a significant decrease in total cell number. Pregnancy rate was significantly reduced when embryos were irradiated with the red wavelength. Weight at weaning was significantly higher when embryos were exposed to yellow or red wavelengths. Lipid abundance was significantly elevated following exposure to the yellow wavelength. Conclusion Our results demonstrate that the impact of light is wavelength-specific, with longer wavelengths also impacting the embryo. We also show that effects are energy-dependent. This data shows that damage is multifaceted and developmental rate alone may not fully reflect the impact of light exposure. Publisher PDF

The conversion of layered transition metal carbides and/or nitrides (MXenes) into zero-dimensional structures with thicknesses and lateral dimensions of a few nanometers allows these recently discovered materials with exceptional electronic properties to exploit the additional benefits of quantum confinement, edge effects, and large surface area. Conventional methods for the conversion of MXene nanosheets and quantum dots, however, involve extreme conditions such as high temperatures and/or harsh chemicals that, among other disadvantages, lead to significant degradation of the material as a consequence of their oxidation. Herein, we show that the large surface acceleration-on the order of 10 million

Additively manufactured selective laser melted titanium (SLM-Ti) opens the possibility of tailored medical implants for patients. Despite orthopedic implant advancements, significant problems remain with regard to suboptimal osseointegration at the interface between the implant and the surrounding tissue. Here, we show that applying a nanodiamond (ND) coating onto SLM-Ti scaffolds provides an improved surface for mammalian cell growth while inhibiting colonization of Staphylococcus aureus bacteria. Owing to the simplicity of our methodology, the approach is suitable for coating SLM-Ti geometries. The ND coating achieved 32 and 29% increases in cell density of human dermal fibroblasts and osteoblasts, respectively, after 3 days of incubation compared with the uncoated SLM-Ti substratum. This increase in cell density complements an 88% reduction in S. aureus detected on the ND-coated SLM-Ti substrata. This study paves a way to create facile antifouling SLM-Ti structures for biomedical implants.

The nitrogen-vacancy (NV) centre is a fluorescent defect in diamond that is of critical importance for applications from ensemble sensing to biolabelling. Hence, understanding and optimising the creation of NV centres in diamond is vital for technological progress in these areas. We demonstrate that simultaneous electron irradiation and annealing of a high-pressure high-temperature diamond sample increases the NV centre creation efficiency from substitutional nitrogen defects by up to 117 % with respect to a sample where the processes are carried out consecutively, but using the same process parameters. This increase in fluorescence is supported by visible and infrared absorption spectroscopy experiments. Our results pave the way for a more efficient creation of NV centres in diamond as well as higher overall NV densities in the future.

Until recently, the number of emission colors available from fluorescent diamond particles was primarily limited to red to near-infrared fluorescence from the nitrogen-vacancy color center in type Ib synthetic diamond and green fluorescence associated with the nitrogen-vacancy-nitrogen center in type Ia natural diamond. Using our recently reported rapid thermal annealing technique, we demonstrate the capability of producing fluorescent diamond particles that exhibit distinctive blue, green, yellow, and red fluorescence from the same synthetic diamond starting material. Utilizing these multiple colored diamonds, we analyze their fluorescence characteristics both in-solution as well as on-substrate and additionally evaluate their viability in simple multiplex imaging and cellular bioimaging experiments. While there are still challenges associated with their immediate use in traditional multiplex imaging, this novel approach opens new opportunities to enhance the capability and flexibility of fluorescent diamond particles at the nanoscale.

Sabrina Heng, Xiaozhou Zhang, Jinxin Pei, Alaknanda Adwal, Philipp Reineck, Brant C. Gibson, Mark R. Hutchinson and Andrew D. Abell

The conversion of layered transition metal carbides and/or nitrides (MXenes) into zero-dimensional structures with thicknesses and lateral dimensions of a few nanometers allows these recently discovered materials with exceptional electronic properties to exploit the additional benefits of quantum confinement, edge effects, and large surface area. Conventional methods for the conversion of MXene nanosheets and quantum dots, however, involve extreme conditions such as high temperatures and/or harsh chemicals that, among other disadvantages, lead to significant degradation of the material as a consequence of their oxidation. Herein, we show that the large surface acceleration.on the order of 10 million gs.produced by high-frequency (10 MHz) nanometer-order electromechanical vibrations on a chipscale piezoelectric substrate is capable of efficiently nebulizing, and consequently dimensionally reducing, a suspension of multilayer Ti3C2Tz (MXene) into predominantly monolayer nanosheets and quantum dots while, importantly, preserving the material from any appreciable oxidation. As an example application, we show that the high-purity MXene quantum dots produced using this room-temperature chemical-free synthesis method exhibit superior performance as electrode materials for electrochemical sensing of hydrogen peroxide compared to the highly oxidized samples obtained through conventional hydrothermal synthesis. The ability to detect concentrations as low as 5 nM is a 10-fold improvement to the best reported performance of Ti3C2Tz MXene electrochemical sensors to date. Funding Agencies|Australian Research CouncilAustralian Research Council [DP180102110]; SSF Synergy Program [EM16-0004]; Knut and Alice Wallenberg (KAW) FoundationKnut & Alice Wallenberg Foundation [KAW2015.0043]; ARC DECRA FellowshipAustralian Research Council [DE200100279]; RMIT University

Next generation wound care technology capable of diagnosing wound parameters, promoting healthy cell growth, and reducing pathogenic infections noninvasively would provide patients with an improved standard of care and accelerated wound repair. Temperature is one of the indicating biomarkers specific to chronic wounds. This work reports a hybrid, multifunctional optical material platform-nanodiamond (ND)-silk membranes as biopolymer dressings capable of temperature sensing and promoting wound healing. The hybrid structure was fabricated through electrospinning, and 3D submicron fibrous membranes with high porosity were formed. Silk fibers are capable of compensating for the lack of an extracellular matrix at the wound site, supporting the wound-healing process. Negatively charged nitrogen vacancy (NV-) color centers in NDs exhibit optically detected magnetic resonance (ODMR) and act as nanoscale thermometers. This can be exploited to sense temperature variations associated with the presence of infection or inflammation in a wound, without physically removing the dressing. Our results show that the presence of NDs in the hybrid ND-silk membranes improves the thermal stability of silk fibers. NV- color centers in NDs embedded in silk fibers exhibit well-retained fluorescence and ODMR. Using the NV- centers as fluorescent nanoscale thermometers, we achieved temperature sensing in 25-50 °C, including the biologically relevant temperature window, for cell-grown ND-silk membranes. An enhancement (∼1.5× on average) in the temperature sensitivity of the NV- centers was observed for the hybrid materials. The hybrid membranes were further tested in vivo in a murine wound-healing model and demonstrated biocompatibility and equivalent wound closure rates as the control wounds. Additionally, the hybrid ND-silk membranes exhibited selective antifouling and biocidal propensity toward Gram-negative Pseudomonas aeruginosa and Escherichia coli, while no effect was observed on Gram-positive Staphylococcus aureus.

Multimodal imaging promises to revolutionize the understanding of biological processes across scales in space and time by combining the strengths of multiple imaging techniques. Fluorescent nanodiamonds (FNDs) are biocompatible, chemically inert, provide high contrast in light- and electron-based microscopy, and are versatile optical quantum sensors. Here it is demonstrated that FNDs also provide high absorption contrast in nanoscale 3D soft X-ray tomograms with a resolution of 28 nm in all dimensions. Confocal fluorescence, atomic force, and scanning electron microscopy images of FNDs inside and on the surface of PC3 cancer cells with sub-micrometer precision are correlated. FNDs are found inside ≈1 µm sized vesicles present in the cytoplasm, providing direct evidence of the active uptake of bare FNDs by cancer cells. Imaging artefacts are quantified and separated from changes in cell morphology caused by sample preparation. These results demonstrate the utility of FNDs in multimodal imaging, contribute to the understanding of the fate of FNDs in cells, and open up new possibilities for biological imaging and sensing across the nano- and microscale.

Hydrogenated detonation nanodiamonds are of great interest for emerging applications in areas from biology and medicine to lubrication. Here, we compare the two main hydrogenation techniques&mdash, annealing in hydrogen and plasma-assisted hydrogenation&mdash, for the creation of detonation nanodiamonds with a hydrogen terminated surface from the same starting material. Synchrotron-based soft X-ray spectroscopy, infrared absorption spectroscopy, and electron energy loss spectroscopy were employed to quantify diamond and non-diamond carbon contents and determine the surface chemistries of all samples. Dynamic light scattering was used to study the particles&rsquo, colloidal properties in water. For the first time, steady-state and time-resolved fluorescence spectroscopy analysis at temperatures from room temperature down to 10 K was performed to investigate the particles&rsquo, fluorescence properties. Our results show that both hydrogenation techniques produce hydrogenated detonation nanodiamonds with overall similar physico-chemical and fluorescence properties.

Nanodiamonds are increasingly used in many areas of science and technology, yet, their colloidal properties remain poorly understood. Here we use direct imaging as well as light and X-ray scattering reveal that purified detonation nanodiamond (DND) particles in an aqueous environment exhibit a self-assembled lace-like network, even without additional surface modification. Such behaviour is previously unknown and contradicts the current consensus that DND exists as mono-dispersed single particles. With the aid of mesoscale simulations, we show that the lace network is likely the result of competition between a short-ranged electrostatic attraction between faceted particles and a longer-ranged repulsion arising from the interaction between the surface functional groups and the surrounding water molecules which prevents complete flocculation. Our findings have significant implications for applications of DND where control of the aggregation behaviour is critical to performance.

Diamond containing the negatively charged nitrogen-vacancy (NV) center is emerging as a significant new system for magnetometry. However, most NV sensors require microscopes to collect the fluorescence signals and are therefore limited to laboratory settings. By incorporating micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, a high-sensitivity and robust fiber platform for magnetic field sensing is demonstrated here. The fluorescence and spin properties of NV centers embedded in the diamond crystals are well preserved during the fiber drawing process, leading to enhanced continuous-wave diamond-magnetometry in fiber-transmitted sensing configurations. The interface doping of diamond particles also leads to reduced fiber propagation loss and benefits the guidance of NV-fluorescence in the hybrid fiber. Using the diamond-fiber system, magnetic field readout through 50 cm of fiber is achieved. This study paves the way for novel fiber-based diamond sensors for field-deployable quantum metrology applications.

Refereed/Peer-reviewed

The nitrogen-vacancy (NV) centre in diamond is a perfect candidate for quantum sensing applications applied to numerous fields of science. Past studies improved the sensitivity of diamonds containing NV centres by increasing their density or prolonging their coherence time. However, few studies discussed the effects of other defects inside the diamond crystal on the sensitivity of the NV centres. In this study, we demonstrated the implication of single substitutional nitrogen defects on the fluorescence emission, charge state stability, coherence time and sensitivity of the NV centres. We found that there is an optimal concentration of nitrogen defects that allows diamond samples to have a high-density of NV centres and high fluorescence without significantly affecting the coherence time. This results will inform the correct choice of diamond characteristics for current and future quantum sensing applications with the NV centres.

Fluorescent nanodiamonds made from high-pressure high-temperature diamond are increasingly used in biological imaging and sensing applications. To date, only red and green fluorescent nanodiamonds are widely available, severely limiting nanodiamond-based multiplexed imaging. Here, we report on recent progress in the fabrication and characterization of fluorescent nanodiamonds with fluorescence colors from 450 nm to 900 nm. The fluorescence originates from a range of fluorescent color centers based on nitrogen, silicon, nickel and vacancy defects in the diamond lattice. The optical properties of these color centers in diamond nanoparticles are discussed in detail and the utility of nanodiamond-based multiplexed bioimaging demonstrated in experiments in-vitro.

This work reports nanodiamond-silk membranes as an optical platform for biosensing and cell growth applications. The hybrid structure was fabricated through electrospinning and mimics a 2D scaffold with high porosity. The negatively charged nitrogen vacancy (NV-) centres in diamond exhibits optically detected magnetic resonance (ODMR), which enables sensing of temperature variations. The NV- centre, as reported in literature, provides a shift of 74 kHz in the ODMR frequency per degree rise in temperature. For our hybrid membranes, we have however observed that the embedded NV- centre provide a greater shift of 95±5 kHz/K in the ODMR frequency. This higher shift in the frequency will result in improved temperature sensitivity enabling the tracking of thermal variations in the biologically relevant window of 25-50 oC. The thermal conductivity of silk and diamond-silk hybrid will be explored to investigate this enhanced temperature sensing ability of diamond. The hybrid diamond-silk membranes are found to be hydrophilic with a contact angle of (65±2)o. The biocompatibility of the membranes is tested both in vitro in skin keratinocyte (HaCaT) cells and in vivo in a live mouse wound model. The membranes did not induce any toxicity to the cell growth and survival. Moreover, we observed resistance towards the growth and attachment of bacteria.

Oxygen vacancies in inorganic semiconductors play an important role in reducing electron–hole recombination, which may have important implications in photocatalysis. Cuprous oxide (Cu2O), a visible light active p-type semiconductor, is a promising photocatalyst. However, the synthesis of photostable Cu2O enriched with oxygen defects remains a challenge. We report a simple method for the gram-scale synthesis of highly photostable Cu2O nanoparticles by the hydrolysis of a Cu(I)-triethylamine [Cu(I)–TEA] complex at low temperature. The oxygen vacancies in these Cu2O nanoparticles led to a significant increase in the lifetimes of photogenerated charge carriers upon excitation with visible light. This, in combination with a suitable energy band structure, allowed Cu2O nanoparticles to exhibit outstanding photoactivity in visible light through the generation of electron-mediated hydroxyl (OH˙) radicals. This study highlights the significance of oxygen defects in enhancing the photocatalytic performance of promising semiconductor photocatalysts.

Detonation nanodiamonds (DNDs) have unique physical and chemical properties that make them invaluable in many applications. However, DNDs are generally assumed to show weak fluorescence, if any, unless chemically modified with organic molecules. We demonstrate that detonation nanodiamonds exhibit significant and excitation-wavelength-dependent fluorescence from the visible to the near-infrared spectral region above 800 nm, even without the engraftment of organic molecules to their surfaces. We show that this fluorescence depends on the surface functionality of the DND particles. The investigated functionalized DNDs, produced from the same purified DND as well as the as-received polyfunctional starting material, are hydrogen, hydroxyl, carboxyl, ethylenediamine, and octadecylamine-terminated. All DNDs are investigated in solution and on a silicon wafer substrate and compared to fluorescent high-pressure high-temperature nanodiamonds. The brightest fluorescence is observed from octadecylamine-functionalized particles and is more than 100 times brighter than the least fluorescent particles, carboxylated DNDs. The majority of photons emitted by all particle types likely originates from non-diamond carbon. However, we locally find bright and photostable fluorescence from nitrogen-vacancy centers in diamond in hydrogenated, hydroxylated, and carboxylated detonation nanodiamonds. Our results contribute to understanding the effects of surface chemistry on the fluorescence of DNDs and enable the exploration of the fluorescent properties of DNDs for applications in theranostics as nontoxic fluorescent labels, sensors, nanoscale tracers, and many others where chemically stable and brightly fluorescent nanoparticles with tailorable surface chemistry are needed.

Biologically compatible fluorescent ion sensors, particularly those that are reversible, represent a key tool for answering a range of fundamental biological questions. We report a rationally designed probe with a 6′-fluoro spiropyran scaffold (5) for the reversible sensing of zinc (Zn 2+ ) in cells. The 6′-fluoro substituent overcomes several limitations normally associated with spiropyran-based sensors to provide an improved signal-To-background ratio and faster photoswitching times in aqueous solution. In vitro studies were performed with 5 and the 6′-nitro analogues (6) in HEK 293 and endothelial cells. The new spiropyran (5) can detect exogenous Zn 2+ inside both cell types and without affecting the proliferation of endothelial cells. Studies were also performed on dying HEK 293 cells, with results demonstrating the ability of the key compound to detect endogenous Zn 2+ efflux from cells undergoing apoptosis. Biocompatibility and photoswitching of 5 were demonstrated within endothelial cells but not with 6, suggesting the future applicability of sensor 5 to study intracellular Zn 2+ efflux in these systems. Refereed/Peer-reviewed

Nanostructured and bulk silicon carbide (SiC) has recently emerged as a novel platform for quantum nanophotonics due to its harboring of paramagnetic color centers, having immediate applications as a single photon source and spin optical probes. Here, using ultra-short pulsed laser ablation, we fabricated from electron irradiated bulk 4H-SiC, 40-50 nm diameter SiC nanoparticles, fluorescent at 850-950 nm. This photoluminescence is attributed to the silicon vacancy color centers. We demonstrate that the original silicon vacancy color centers from the target sample were retained in the final nanoparticles solution, exhibiting excellent colloidal stability in water over several months. Our work is relevant for quantum nanophotonics, magnetic sensing, and biomedical imaging applications.

Cubic boron nitride (cBN) is a synthetic wide band gap material that has attracted attention due to its high thermal conductivity, optical transparency and optical emission. In this work, defects in cBN have been investigated using experimental and theoretical X-ray absorption near edge structure (XANES). Vacancy and O substitutional defects were considered, with O substituted at the N site (ON) to be the most energetically favorable. All defects produce unique signatures in either the B or N K-edges and can thus be identified using XANES. The calculations coupled with electron-irradiation / annealing experiments strongly suggest that ON is the dominant defect in irradiated cBN and remains after annealing. This defect is a likely source of optical emission in cBN.

The nitrogen-vacancy (NV) centre in diamond is a unique optical defect that is used in many applications today and methods to enhance its fluorescence brightness are highly sought after. We observed experimentally an enhancement of the NV quantum yield by up to 7% in bulk diamond caused by an external magnetic field relative to the field-free case. This observation is rationalised phenomenologically in terms of a magnetic field dependence of the NV excited state triplet-to-singlet transition rate. The theoretical model is in good qualitative agreement with the experimental results at low excitation intensities. Our results significantly contribute to our fundamental understanding of the photophysical properties of the NV defect in diamond.

Recent work in biomolecule-metal–organic framework (MOF) composites have proven to be an effective strategy for the protection of proteins. However, for other biomacromolecules such as nucleic acids, the encapsulation into MOFs and the related characterizations are at is infancy. We herein report encapsulation of complete gene-set in zeolitic imidazolate framework-8 (ZIF-8) MOFs and intracellular expression of the gene delivered by the MOF composites. Using a GFP plasmid (plGFP) as a proof-of-concept genetic macromolecule, we show successful transfection of mammalian cells with plGFP for up to 4 days, demonstrating the feasibility of DNA@MOF biocomposites as intracellular gene delivery vehicles which occurs over relatively prolonged time points where the cargo nucleic acid is released gradually in order to maintain sustained expression., This is the pre-peer reviewed version of the following article: Encapsulation, Visualization and Expression of Genes with Biomimetically Mineralized Zeolitic Imidazolate Framework-8 (ZIF-8), which has been published in final form at http://dx.doi.org/10.1002/smll.201902268. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions.

Additively manufactured selective laser melted titanium (SLM-Ti) opens the possibility of tailored medical implants for patients. Despite orthopedic implant advancements, significant problems remain with regard to suboptimal osseointegration at the interface between the implant and the surrounding tissue. Here, we show that applying a nanodiamond (ND) coating onto SLM-Ti scaffolds provides an improved surface for mammalian cell growth while inhibiting colonization of

Nanodiamonds are a carbon based class of nanoparticle quickly gaining popularity due to their low toxicity and versatile applications in biology and nanomedicine Their cheap and large scale synthesis, extensive optical characterisation and ease of bio-functionalisation also makes nanodiamonds an attractive material for use in bio-targeting studies Although central nervous system (CNS) cells are well known to functionally communicate via electrical and chemical signals, cell-surface glycans mediate the initial contact between cells and exogenous proteins. Glycosylation, the enzymatic process by which glycans are attached to proteins and lipids, is the most abundant and functionally important type of post-translational modification associated with brain development, neurodegenerative disorders, psychopathologies and brain cancers. The glycan structures on glycoproteins and glycolipids expressed in brain cells play key functional roles in neural development, biological processes and CNS maintenance such as cell adhesion, signal transduction, molecular trafficking and differentiation. Using EDC/NHS chemistry, we have coated fluorescent nanodiamonds with lectin proteins, which can recognise specific glycan receptor structures expressed on the cellular membrane of CNS cells There is substantial value in developing nanoparticle/lectin complexes for targeted nanoparticle based drug delivery in the CNS as their interaction with cell surface glycan receptors readily triggers endocytosis and subsequent trafficking to intracellular organelles such as endosomes and long term storage in the endoplasmic reticulum. We have engineered lectin coated fluorescent nanodiamonds and tested their ability to recognise specific CNS cell types in 2D and 3D models of brain cells in vitro and also applied them in vivo to rat brains Lectin coated nanodiamonds were successfully endocy-tosed by neurons, microglia and astrocytes in vitro and/or in vivo and remained in these cells for at least 48 hours with minimal stress to the host cells.

Nanoparticles made of non-noble metals such as gallium have recently attracted significant attention due to promising applications in UV plasmonics. To date, experiments have mostly focused on solid and liquid pure gallium particles immobilized on solid substrates. However, for many applications, colloidal liquid-metal nanoparticle solutions are vital. Here, we experimentally demonstrate strong UV plasmonic resonances of eutectic gallium-indium (EGaIn) liquid-metal alloy nanoparticles suspended in ethanol. We rationalise experimental results through a theoretical model based on Mie theory. Our results contribute to the understanding of UV plasmon resonances in colloidal liquid-metal EGaIn nanoparticle suspensions. They will also enable further research into emerging applications of UV plasmonics in biomedical imaging, sensing, stretchable electronics, photoacoustics, and electrochemistry.