Search

While highly automated driving relies most of the time on a smooth driving assumption, the possibility of a vehicle performing harsh maneuvers with high dynamic driving to face unexpected events is very likely. The modeling of the behavior of the vehicle in these events is crucial to proper planning and controlling; the used model should present accurate and computationally efficient properties to ensure consistency with the dynamics of the vehicle and to be employed in real-time systems. In this article, we propose an LSTM-based hybrid extended bicycle model able to present an accurate description of the state of the vehicle for both normal and aggressive situations. The introduced model is used in a Model Predictive Path Integral (MPPI) plan and control framework for performing trajectories in high-dynamic scenarios. The proposed model and framework prove their ability to plan feasible trajectories ensuring an accurate vehicle behavior even at the limits of handling.

For autonomous driving or advanced driving assistance, it is key to monitor the vehicle dynamics behavior. Accurate models of this behavior include acceleration, but also the side-slip angle, that eventually results from the complex interaction between the tires and the road. Though it is an essential quantity (e.g. for stability assessment), as opposed to accelerations, it is not measurable through conventional off-the-shelf sensors. Therefore, accurate side-slip angle observers are necessary for the proper planning and control of vehicles. In this paper, we introduce a novel approach that combines model-based side-slip angle estimation with neural networks. We apply our approach to real vehicle data. We prove that the proposed method is able to outperform state-of-the-art methods for normal driving maneuvers, and for near-limits maneuvers where providing accurate estimations becomes challenging.

Accurate velocity estimation is key to vehicle control. While the literature describes how model-based and learning-based observers are able to estimate a vehicle's velocity in normal driving conditions, the challenge remains to estimate the velocity in near-limits maneuvers while using only conventional in-car sensors. In this paper, we introduce a novel neural network architecture based on Long Short-Term Memory (LSTM) networks to accurately estimate the vehicle's velocity in different driving conditions, including maneuvers at the limits of handling. The approach has been tested on real vehicle data and it provides more accurate estimations than state-of-the-art model-based and learning-based methods, for both regular and near-limits driving scenarios. Our approach is robust since the performance of the state-of-the-art observers deteriorates with higher dynamics, while our method adapts to different maneuvers, providing accurate estimations even at the vehicle's limits of handling.

The knowledge of the states of a vehicle is a necessity to perform proper planning and control. These quantities are usually accessible through measurements. Control theory brings extremely useful methods -- observers -- to deal with quantities that cannot be directly measured or with noisy measurements. Classical observers are mathematically derived from models. In spite of their success, such as the Kalman filter, they show their limits when systems display high non-linearities, modeling errors, high uncertainties or difficult interactions with the environment (e.g. road contact). In this work, we present a method to build a learning-based observer able to outperform classical observing methods. We compare several neural network architectures and define the data generation procedure used to train them. The method is evaluated on a kinematic bicycle model which allows to easily generate data for training and testing. This model is also used in an Extended Kalman Filter (EKF) for comparison of the learning-based observer with a state of the art model-based observer. The results prove the interest of our approach and pave the way for future improvements of the technique., Comment: ICSC 2022

This paper explores the capability of deep neural networks to capture key characteristics of vehicle dynamics, and their ability to perform coupled longitudinal and lateral control of a vehicle. To this extent, two different artificial neural networks are trained to compute vehicle controls corresponding to a reference trajectory, using a dataset based on high-fidelity simulations of vehicle dynamics. In this study, control inputs are chosen as the steering angle of the front wheels, and the applied torque on each wheel. The performance of both models, namely a Multi-Layer Perceptron (MLP) and a Convolutional Neural Network (CNN), is evaluated based on their ability to drive the vehicle on a challenging test track, shifting between long straight lines and tight curves. A comparison to conventional decoupled controllers on the same track is also provided., Comment: Published in the IEEE 2018 International Conference on Intelligent Transportation Systems (ITSC 2018)

This paper proposes to combine a 10Hz motion planner based on a kinematic bicycle Model Predictive Control (MPC) and a 100Hz closed-loop Proportional-Integral-Derivative (PID) controller to cope with normal driving situations. Its novelty consists in ensuring the feasibility of the computed trajectory by the motion planner through a limitation of the steering angle depending on the speed. This ensures the validity of the kinematic bicycle model at any time. The architecture is tested on a high-fidelity simulation model on a challenging track with small curve radius, with and without surrounding obstacles., Comment: 7 pages, 9 figures, American Control Conference 2018, Milwaukee, WI (accepted)

This communication presents a longitudinal model-free control approach for computing the wheel torque command to be applied on a vehicle. This setting enables us to overcome the problem of unknown vehicle parameters for generating a suitable control law. An important parameter in this control setting is made time-varying for ensuring finite-time stability. Several convincing computer simulations are displayed and discussed. Overshoots become therefore smaller. The driving comfort is increased and the robustness to time-delays is improved., Comment: IFAC 2017 World Congress, Toulouse

To improve safety and energy efficiency, autonomous vehicles are expected to drive smoothly in most situations, while maintaining their velocity below a predetermined speed limit. However, some scenarios such as low road adherence or inadequate speed limit may require vehicles to automatically adapt their velocity without external input, while nearing the limits of their dynamic capacities. Many of the existing trajectory planning approaches are incapable of making such adjustments, since they assume a feasible velocity reference is given. Moreover, near-limits trajectory planning often implies high-complexity dynamic vehicle models, making computations difficult. In this article, we use a simple dynamic model derived from numerical simulations to design a trajectory planner for high-speed driving of an autonomous vehicle based on model predictive control. Unlike existing techniques, our formulation includes the selection of a feasible velocity to track a predetermined path while avoiding obstacles. Simulation results on a highly precise vehicle model show that our approach can be used in real-time to provide feasible trajectories that can be tracked using a simple control architecture. Moreover, the use of our simplified model makes the planner more robust and yields better trajectories compared to kinematic models commonly used in trajectory planning.

In normal on-road situations, autonomous vehicles will be expected to have smooth trajectories with relatively little demand on the vehicle dynamics to ensure passenger comfort and driving safety. However, the occurrence of unexpected events may require vehicles to perform aggressive maneuvers, near the limits of their dynamic capacities. In order to ensure the occupant's safety in these situations, the ability to plan controllable but near-limits trajectories will be of very high importance. One of the main issues in planning aggressive maneuvers lies in the high complexity of the vehicle dynamics near the handling limits, which effectively makes state-of-the-art methods such as Model Predictive Control difficult to use. This article studies a highly precise model of the vehicle body to derive a simpler, constrained second-order integrator dynamic model which remains precise even near the handling limits of the vehicle. Preliminary simulation results indicate that our model provides better accuracy without increasing computation time compared to a more classical kinematic bicycle model. The proposed model can find applications for contingency planning, which may require aggressive maneuvers, or for trajectory planning at high speed, for instance in racing applications., Comment: Published in the IEEE IV 2017 conference