Search

The preparation of core–sheath fibers by electrospinning is a topic of significant interest for producing composite fibers with distinct core and sheath functionalities. Moreover, in core–sheath fibers, low-molecular-weight substances or nanosized inorganic additives can be deposited in a targeted manner within the core or the sheath. Commonly, for obtaining a core–sheath structure, coaxial electrospinning is used. It requires a coaxial spinneret and suitable immiscible solvents for the inner and outer solutions. The single-nozzle spinneret electrospinning of emulsions can address these issues, but use of a stabilizing agent is needed. A third approach—preparation of core–sheath fibers by single-nozzle spinneret electrospinning of homogeneous blend solutions of two polymers or of a polymer/low-molecular-weight substance—has been much less studied. It circumvents the difficulties associated with the coaxial and the emulsion electrospinning and is thoroughly discussed in this review. The formation of core–sheath fibers in this case is attributed to phase-separation-driven self-organization during the electrospinning process. Some possibilities for obtaining core–double sheath fibers using the same method are also indicated. The gained knowledge on potential applications of core–sheath fibers prepared by single-nozzle spinneret electrospinning of emulsions and homogeneous blend solutions is also discussed. [ABSTRACT FROM AUTHOR]

The present study aimed to fabricate innovative fibrous materials with various biological activities from poly(3-hydroxybutyrate), sodium hyaluronate (HA), chitosan (Ch), Melissa officinalis (MO), Hypericum perforatum (HP) extract, or a combination of both extracts. Electrospinning or electrospinning followed by dip coating and the subsequent formation of a polyelectrolyte complex were the methods used to prepare these materials. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) were applied for investigating the morphology of materials, their thermal characteristics, and their surface chemical composition. The composition and design of the mats had an influence on the in vitro release behavior of the main bioactive compounds present in the MO and HP extracts incorporated in the materials. It was found that as-created materials comprising a combination of both extracts and a Ch/HA complex exerted higher antioxidant activity than that of (non-)coated MO-containing mats and Ch/HA-coated mats containing HP. The novel materials manifested antibacterial efficacy towards the pathogenic bacteria S. aureus and E. coli, as evidenced by the performed microbiological screening. Furthermore, the mats possessed a great growth inhibitory effect on HeLa cancer cells but had a less pronounced effect on the growth of normal mouse BALB/3T3 fibroblasts. The loading of both extracts in the mats and the formation of coating led to the enhancement of the in vitro anticancer and antibacterial activities of the materials. Thus, the novel materials have potential for use in local cancer therapy as well as for use as wound dressings. [ABSTRACT FROM AUTHOR]

Novel fibrous materials with diverse biological properties containing a model drug of the 8-hydroxyquinoline group—5-amino-8-hydroxyquinoline (5A8Q)—were fabricated using a one-pot method by electrospinning poly(vinyl alcohol) (PVA)/carboxymethyl cellulose (CMC)/5A8Q solutions. Experiments were performed to prepare Cu2+ (Fe3+) complexes of the crosslinked PVA/CMC/5A8Q materials. The formation of complexes was proven by using scanning electron microscopy (SEM), attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy, energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS). The release of 5A8Q and 5A8Q.Cu2+ (Fe3+) was studied and their in vitro release profiles were mostly impacted by the hydrophilic/hydrophobic properties of the materials. The performed microbiological assays revealed that fibrous materials containing 5A8Q and their complexes exhibited good antibacterial and antifungal efficacy. Their activity was stronger against bacteria S. aureus than against bacteria E. coli and fungi C. albicans. Cell viability tests using MTT showed that the presence of 5A8Q and its complexes in the fibrous materials resulted in a significant decrease in the HeLa and MCF-7 cancer cell viability for the various times of cell incubation. Moreover, the observed cytotoxicity of the mats against cancer cells was greater than that against non-cancer HaCaT keratinocytes. All these properties make the novel materials potential candidates for the design of wound healing materials and as drug delivery systems for local therapy of cervical and breast cancer. [ABSTRACT FROM AUTHOR]

Fibrous materials composed of core–sheath fibers from poly(ethylene oxide) (PEO), beeswax (BW) and 5-nitro-8-hydroxyquinoline (NQ) were prepared via the self-organization of PEO and BW during the single-spinneret electrospinning of a homogeneous blend solution of the partners. Additionally, the application of the same approach enabled the preparation of fibrous materials composed of core–double sheath fibers from PEO, poly(L-lactide) (PLA) and NQ or 5-chloro-7-iodo-8-hydroxyquinoline (CQ), as well as from PEO, poly(ε-caprolactone) (PCL) and NQ. The consecutive selective extraction of BW and of the polyester with hexane and tetrahydrofuran, respectively, evidenced that core–double sheath fibers from PEO/polyester/BW/drug consisted of a PEO core, a polyester inner sheath and a BW outer sheath. In order to evaluate the possibility of the application of fibrous materials from PEO/BW/NQ, PEO/PLA/BW/NQ, PEO/PCL/BW/NQ and PEO/PLA/BW/CQ for plant protection, microbiological studies were performed using both phytopathogenic microorganisms (Pseudomonas corrugata, Fusarium graminearum and Fusarium avenaceum) and beneficial microorganisms (Pseudomonas chlororaphis, Bacillus amyloliquefaciens and Trichoderma asperellum). It was found that the fibrous materials had anti-bacterial and anti-fungal activity against both phytopathogenic and beneficial microorganisms. This is the first report on the activity of fibrous materials loaded with 8-hydroxyquinoline derivatives not only against phytopathogenic but also against beneficial microorganisms that are of importance in agriculture. [ABSTRACT FROM AUTHOR]

The Schiff base derivative (Ch-8Q) of chitosan (Ch) and 8-hydroxyquinoline-2-carboxaldehyde (8QCHO) was prepared and fibrous mats were obtained by the electrospinning of Ch-8Q/polylactide (PLA) blend solutions in trifluoroacetic acid (TFA). Complexes of the mats were prepared by immersing them in a solution of CuCl2 or FeCl3. Electron paramagnetic resonance (EPR) analysis was performed to examine the complexation of Cu2+(Fe3+) in the Ch-8Q/PLA mats complexes. The morphology of the novel materials and their surface chemical composition were studied by scanning electron microscopy (SEM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The performed microbiological screening demonstrated that in contrast to the neat PLA mats, the Ch-8Q-containing mats and their complexes were able to kill all S. aureus bacteria within 3 h of contact. These fibrous materials had efficiency in suppressing the adhesion of pathogenic bacteria S. aureus. In addition, Ch-8Q/PLA mats and their complexes exerted good anticancer efficacy in vitro against human cervical HeLa cells and human breast MCF-7 cells. The Ch-8Q-containing fibrous materials had no cytotoxicity against non-cancer BALB/c 3T3 mouse fibroblast cells. These properties render the prepared materials promising as wound dressings as well as for application in local cancer treatment. [ABSTRACT FROM AUTHOR]

Fungi constitute the largest number of plant pathogens and are responsible for a range of serious plant diseases. Phaeomoniella chlamydospora (P. chlamydospora) and Phaeoacremonium aleophilum (P. aleophilum) are the main fungal pathogens causing esca disease in grapevines. On the other hand, there are beneficial microorganisms such as Trichoderma spp., which are able to control the growth of many phytopathogens. In the present study, innovative, eco-friendly hybrid nanomaterials were created by electrospinning PLLA, followed by the formation of a film of chitosan/Trichoderma asperellum (T. asperellum) spores on the fibers. The polymer carrier used in this study plays an active role in ensuring the viability of the biological agent during storage and, when placed in contact with moisture, ensures the agent's normal development. Oligochitosan, as well as low molecular weight and high molecular weight chitosan, were used. The effects of chitosan molecular weight on the dynamic viscosity of chitosan solutions, film formation, mechanical properties, spore incorporation and growth were studied. The morphology of the prepared nanomaterials, and the presence of a film based on the formation of chitosan/T. asperellum spores on the PLLA fibers, were examined using scanning electron microscopy (SEM). The surface chemical compositions of the fibrous materials were studied using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). The mechanical properties of the obtained materials were also tested. The microbiological screening that was performed revealed that the eco-friendly hybrid nanomaterials incorporated with the beneficial microorganism, T. asperellum, to hamper the growth of the pathogenic P. chlamydospora and P. aleophilum fungi. The suppression rate depended on the viscosity of the chitosan solution used for the film formation. The use of oligochitosan resulted in the most effective infection of the material with T. asperellum spores. The environmentally friendly hybrid nanomaterials obtained in this study—in which the bioagent was embedded—are promising bioactive dressings for protecting grapevines against esca disease. [ABSTRACT FROM AUTHOR]

For the first time, fibrous polylactide (PLA) materials containing plant extract of Portulaca oleracea obtained using supercritical carbon dioxide were successfully prepared by electrospinning. The effect of the extract concentration on the morphology and properties of the obtained materials was studied. P. oleracea extracts of 0–7.5 wt% in 10 wt% PLA solutions were electrospun. The optimal process conditions for the preparation of defect‐free fibers were found. The newly obtained fibrous materials were fully characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, X‐ray diffraction analysis and water contact angle measurements. It was found that the incorporation of the crude extract had a significant effect on the average fiber diameter, thermal characteristics and structure of the obtained materials. Moreover, it was found that the electrospun PLA/P. oleracea materials showed high antioxidant activity. The cytocompatibility of fibrous mats was assessed and it was found that the materials loaded with P. oleracea enhanced the cell viability of mouse BALB/c‐3T3 fibroblasts. Thus the obtained novel materials could be a potential candidate for tissue regeneration and wound healing applications. © 2021 Society of Industrial Chemistry. [ABSTRACT FROM AUTHOR]