Search

Purpose: To evaluate the published literature on tooth--tissue supported removable partial dentures (RPDs) and determine the attachment system that provides the best clinical outcome. Materials and Methods: A comprehensive search of studies published up to November 2021 was performed in the PubMed/MEDLINE, Web of Science, and Cochrane Library databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) criteria. The study protocol was approved and was registered in the International Prospective Register of Systematic Reviews (PROSPERO: CRD42021268449). The PICO question was, "What is the best attachment system used in Kennedy class I and II removable partial dentures?" Results: The search identified 871 articles, of which 21 met the inclusion criteria. The evaluation period in the studies ranged from 3 to 282 months. A total of 1,357 patients were included, of which 526 used prostheses with attachments. The mini SG attachment (extracoronal) was the most commonly used attachment, and the survival rate ranged from 37% to 98.1% in 10 studies, with no significant differences between the systems. Among the 10 studies selected for quantitative analysis, the meta-analysis revealed an overall failure rate of 16.6% (95% CI: 10.4% to 25.4%) and heterogeneity of I² = 65.725 (q value: 26.258, P = .002). Conclusions: Clinical studies comparing different attachment systems for rehabilitation are lacking. Our findings suggest that attachment-retained RPDs have good retention and better esthetics than conventional RPDs, and the extracoronal attachment system is the most viable choice for treatment at the free end. [ABSTRACT FROM AUTHOR]

Purpose: To identify and map the scientific evidence regarding factors associated with the nonadaptation of completely edentulous patients to mandibular complete dentures. Materials and Methods: This scoping review followed the PRISMA-ScR statement for Scoping Reviews and was based on guidelines proposed by Arksey and O'Malley and the Joanna Briggs Institute Manual for Evidence Synthesis. The methodology was registered on the Open Science Framework. An electronic search strategy was conducted in PubMed/MEDLINE, Web of Science, Scopus, Cochrane Library, Virtual Health Library, ClinicalTrials.gov, Google Scholar, and ProQuest databases was conducted. Studies that evaluated factors associated with adaptation to and acceptance of mandibular complete dentures were included, such as sociodemographic, psychologic, patient-related, and denture-related items. Results: The search conducted in March 2022 yielded 9,978 studies. In total, 24 studies were included for data extraction. Sociodemographic factors did not interfere with adaptation to a mandibular complete denture. Psychologic factors and patient-related aspects showed greater association with nonadaptation to mandibular complete dentures than denturereported factors. Conclusion: Although it is suggestive that psychologic and patient-related factors have higher association with the acceptance of new dentures, data must be interpreted with caution due to the variability of methodologies of the studies included in this review. [ABSTRACT FROM AUTHOR]

Objective: The surgical treatment of Eagle syndrome involves an intra- or extraoral approach. This systematic review set out to consolidate current knowledge on the prevalence of complications associated with intraoral and external approaches. Methods: Seven main electronic and two gray literature databases were searched. Studies were blindly selected by two reviewers based on pre-defined eligibility criteria. Studies evaluating any type of complication in the treatment of Eagle syndrome were considered eligible. Risk of bias was assessed using the Joanna Briggs Institute Critical Appraisal Checklist for studies reporting prevalence data, case reports, and case series. The Comprehensive Meta-Analysis software (Software version 3.0 – Biostat, Englewood, NJ, USA) was used to perform all meta-analyses. Results: Out of 1728 articles found on all databases, 36 were included for qualitative analysis. Twenty were included for quantitative analysis and meta-analysis. Conclusion: In this study, the highest rate of complications was found in the intraoral approach. [ABSTRACT FROM AUTHOR]

Objectives: This study aimed to assess the influence of translucent monolithic versus bilayered crowns and whether the use of a CoCr base abutments affects the fatigue and fracture resistance of screwed implant‐supported single crowns with external connections under mechanical cycling. Materials and Methods: Fifty specimens were divided into groups: (1) metal–ceramic (MC) crown, (2) veneered zirconia crown (Zr), (3) veneered zirconia crown with a CoCr base abutment (ZrB), (4) monolithic translucent zirconia crown (MZr), and (5) monolithic translucent zirconia crown with a CoCr base abutment (MZrB). Specimens underwent mechanical cycling (5 × 106 cycles; 150 N) evaluating fatigue resistance (number of failures) and those that failed were subsequently subjected to fractographic analyses (stereomicroscope and scanning electron microscope) to evaluate failure location and area, and maximum fracture load was also measured. Results: The failure‐related survival rate (100%) and maximum fracture resistance of the MZrB were significantly higher than those of MC and Zr (50%; p < 0.05). There were no significant differences in the failure rate and fracture resistance when a CoCr base abutment was used or not in the translucent monolithic Zr groups (p > 0.05;MZrB vs. MZr). Failure location, with MC crowns' fractures, noted at the screw area (p = 0.043), while all‐ceramic crowns were mostly in the cuspid and to failure area, the Zr group had the largest mean (15.55 ± 9.17 mm2) among the groups, significant difference only when compared with MC (1.62 ± 0.81 mm2) (p = 0.025). Conclusions: Translucent monolithic zirconia crowns exhibited significantly higher fatigue and fracture resistance compared with conventional MC and bilayered crowns. Clinical Significance: The appropriate choice of material and manufacturing technique is crucial for predicting the higher clinical performance of single crowns. Enhanced mechanical resistance in terms of fatigue and fracture resistance can be achieved by replacing MC and bilayered restorations with computer‐aided design and computer‐aided manufacturing monolithic zirconia. [ABSTRACT FROM AUTHOR]

Objective: In ICU patients on mechanical ventilation (MV), ventilator-associated pneumonia (VAP) is a common infection. However, such infection can be prevented through oral care protocols. The objective of this study was to compare the efficiency of the use of chlorhexidine and oral hygiene protocols (brushing and clinical procedures) with that of the use of chlorhexidine alone (intervention group and control group, respectively) in decreasing the prevalence of VAP in patients ≥ 18 years of age admitted to the ICU and requiring MV. Methods: In this systematic review and meta-analysis, studies were identified through searches of various national and international databases, as well as of the gray literature, and were selected in accordance with eligibility criteria. Results: We evaluated six studies, involving a collective total of 1,276 patients. We classified the risk of bias as low in three studies, high in two, and uncertain in one; among the six risk domains evaluated, a low risk of bias was predominant in five. The results for random risks were similar in terms of direction and statistical magnitude—chi-square = 6.34; risk difference: −0.06 (95% CI: −0.11 to −0.02); I2 = 21%; p = 0.007. There was a decrease in the prevalence of VAP in the intervention group (n = 1,276) included in the meta-analysis. Conclusions: Protocols that include the mechanical removal of oral biofilm in combination with the use of chlorhexidine can reduce the incidence of VAP among ICU patients requiring MV. [ABSTRACT FROM AUTHOR]

Ectodermal dysplasia is a group of hereditary syndromes that presents defects in the development of one or more tissues of ectodermal origin. This study aimed to describe an oral rehabilitation of a patient with ectodermal dysplasia. Performed with fixed and removable prostheses, it returned the function and aesthetics, raising his self-esteem. Patient went for outpatient treatment at the Hospital for Craniofacial Anomalies in the dental prosthesis sector, complaining of esthetics and impaired masticatory function. On intraoral examination, numerous tooth absences were observed due to agenesis and malformation in the few remaining teeth (teeth region 13, 11, 21 23). After the clinical and radiographic examination, the treatment included the manufacture of total crowns milled in elements 11, 13, 21, and 23 (06 elements), with bilateral fittings in the canine region to receive a removable partial denture (class I of Kennedy), placing teeth on the free ends due to the impossibility of installing implants. In the lower arch, the only teeth the patient had were the canines 33 and 43, with the aggravating factor that they were rotated and malformed. A fixed canine-to-canine denture and a removable partial denture for the posterior region were made. [ABSTRACT FROM AUTHOR]