Search

While two-dimensional (2D) hexagonal boron nitride (h-BN) is emerging as an atomically thin and dangling bond-free insulating layer for next-generation electronics and optoelectronics, its practical implementation into miniaturized integrated circuits has been significantly limited due to difficulties in large-scale growth directly on epitaxial semiconductor wafers. Herein, the realization of a wafer-scale h-BN van der Waals heterostructure with a 2 in. AlGaN/GaN high-electron mobility transistor (HEMT) wafer using metal-organic chemical vapor deposition is presented. The combination of state-of-the-art microscopic and spectroscopic analyses and theoretical calculations reveals that the heterointerface between ∼2.5 nm-thick h-BN and AlGaN layers is atomically sharp and exhibits a very weak van der Waals interaction without formation of a ternary or quaternary alloy that can induce undesired degradation of device performance. The fabricated AlGaN/GaN HEMT with h-BN shows very promising performance including a cutoff frequency (fT) and maximum oscillation frequency (fMAX) as high as 28 and 88 GHz, respectively, enabled by an effective passivation of surface defects on the HEMT wafer to deliver accurate information with minimized power loss. These findings pave the way for practical implementation of 2D materials integrated with conventional microelectronic devices and the realization of future all-2D electronics.

Remanufacturing has emerged as a way to solve production problems, as raw material costs increase and environmental pollution caused by discarded equipment occurs. The process can extend product lifetime and prevent waste of resources. In particular, it has economical efficiency for large equipment such as GIS (Gas Insulated Switchgear). The crucial points in remanufacturing are determining replaceable parts and economic valuation. To address these issues, we propose a framework for remanufacturing GIS with remaining lifetime prediction. We construct a regression model for remaining useful life (RUL) in the proposed framework using GIS sensor data. The cost of the replacement parts is estimated with the selected sensors. To validate the effectiveness of the proposed framework, we conducted accelerated life testing on a GIS for data acquisition and applied our framework. The experimental results demonstrate that the tree-based RUL regression model outperforms the others in prediction accuracy. In the simulation of part replacement, the important sensor-based decision-making improves RUL significantly.

Hexagonal boron nitride (h-BN), an insulating two-dimensional (2D) layered material, has recently attracted tremendous interest motivated by the extraordinary properties it shows across the fields of optoelectronics, quantum optics, and electronics, being exotic material platforms for various applications. At an early stage of h-BN research, it has been explored as an ideal substrate and insulating layers for other 2D materials due to its atomically flat surface free of dangling bonds and charged impurities, and high thermal conductivity. Recent discoveries of structural and optical properties of h-BN have expanded potential applications into emerging electronics and photonics fields. h-BN shows a very efficient deep-ultraviolet band-edge emission despite its indirect bandgap nature, as well as stable room temperature single-photon emission over a wide wavelength range, showing a great potential for next-generation photonics. In addition, h-BN is extensively being adopted as active media for low energy electronics, including nonvolatile resistive switching memory, radio-frequency devices, and low dielectric constant materials for next-generation electronics. This article is protected by copyright. All rights reserved.

We present resistive switching (RS) behavior of few-layer hexagonal boron nitride (h-BN) mediated by defects and interfacial charge transfer. Few-layer h-BN is grown by metal-organic chemical vapor deposition and used as active RS medium in Ti/h-BN/Au structure, exhibiting clear bipolar RS behavior and fast switching characteristics about ∼25 ns without an initial electroforming process. Systematic investigation on microstructural and chemical characteristics of the h-BN reveals that there are structural defects such as homoelemental B-B bonds at grain boundaries and nitrogen vacancies, which can provide preferential pathways for the penetration of Ti

Remarkable improvements in both structural and optical properties of wafer-scale hexagonal boron nitride (h-BN) films grown by metal-organic chemical vapor deposition (MOCVD) enabled by high-temperature post-growth annealing is presented. The enhanced crystallinity and homogeneity of the MOCVD-grown h-BN films grown at 1050 °C is attributed to the solid-state atomic rearrangement during the thermal annealing at 1600 °C. In addition, the appearance of the photoluminescence by excitonic transitions as well as enlarged optical band gap were observed for the post-annealed h-BN films as direct consequences of the microstructural improvement. The post-growth annealing is a very promising strategy to overcome limited crystallinity of h-BN films grown by typical MOCVD systems while maintaining their advantage of multiple wafer scalability for practical applications towards two-dimensional electronics and optoelectronics.

The structural evolution of h-BN powder by bead-milling is investigated. A unique initial stage in h-BN milling is discovered in which the x-ray diffraction (XRD) out-of-plane (0 0 2) and (0 0 4) peak intensities increase distinctly up to 3 and 4.8 times respectively, corresponding to an effective c-axis ordering of the h-BN particles. The structural evolution of h-BN due to milling is correlated to the change in the dominant milling mechanism from out-of-plane cleaving to in-plane cutting. An abnormal contraction of out-of-plane (0 0 2) interplanar spacing up to 0.044 A due to bead-milling is reported, which could be attributed to the introduction of oxygen functional groups (B-O and N-O) on the h-BN powder.