Search

The inevitable formation of passivating oxide films on the surface of the TiFe intermetallic compound limits its performance as a stationary hydrogen storage material. Extensive experimental efforts have been dedicated to the activation of TiFe, i.e. oxide layer removal prior to utilization for hydrogen storage. However, development of an efficient activation protocol necessitates a fundamental understanding of the composition and structure of the air-exposed surface and its interaction with hydrogen, which currently is absent. Therefore, in this study we explored the growth and nature of the oxide films on the most exposed TiFe surface (110) in depth using static and dynamic first-principles methods. We identified the lowest energy structures for six oxygen coverages up to approximately 1.12 nm of thickness with a global optimization method and studied the temperature effects and structural evolution of the oxide phases in detail via ab-initio molecular dynamics (AIMD). Based on structural similarity and coordination analysis, motifs for TiO2, TiFeO3 as well as Ti(FeO2)x (x = 2, 3 or 5) phases were identified. On evaluating the interaction of the oxidized surface with hydrogen, a minimal energy barrier of 0.172 eV was predicted for H2 dissociation while the H migration from the top of the oxidized surface to the bulk TiFe was limited by several high-lying energy barriers above 1.4 eV. Our mechanistic insights will prove themselves valuable for informed designs towards new activation methods of TiFe and related systems as hydrogen storage materials.

Fabrication approaches, materials, and performance of quantum dot-based infrared photodetectors are reviewed, highlighting opportunities and needs. Device data from 80 articles is provided and analyzed in a publicly available visualization tool.

This study classified the types of dining-out activities into three categories: visiting restaurants, using delivery services, and using take-out services to understand how customers’ various dining-out activities were carried out during the COVID-19 pandemic. The study used the Theory of Planed Behavior (TPB) model to analyze the structural relationship between the main factors and three dining-out activities. An online survey method was used to distribute and collect survey link addresses through respondents’ SNS and e-mail and a data analysis was performed on the final 429(85.8%) effective samples. A paired t-test and structural equation modeling (SEM) were used to investigate customers’ dining-out activities. This study is of significant contribution in that it compared and analyzed customers’ various dining-out activities using the TPB model, laid the theoretical foundation for related research, and suggested ways to help related industry workers establish marketing strategies under the pandemic.

Primary chemomechanical impacts of confinement on hydrogen storage performance are studied using a nanolaminate structure where reduced graphene oxide (rGO) encapsulates palladium (Pd) nanoparticles. Three contributing factors are identified that can alter the reaction enthalpy: nanosizing, chemical interaction with the encapsulant, and mechanical stress induced strain from a combination of clamping force and lateral pulling force exerted on the Pd nanoparticles. The mechanical contributions are quantified by combining transmission electron microscopy, ab initio computation, and continuum elasticity theory, from which the encapsulation is found to exert an additional strain of 4.96% and 2.99% before and after hydrogen absorption, respectively, increasing the Pd and Pd hydride (PdHx) reaction enthalpy by 1.3–2.8 kJ (mol H2)−1. The effect of the chemical interaction with rGO also raises the reaction enthalpy by up to 1.6 kJ (mol H2)−1, while the nanosizing effect decreases the reaction enthalpy. The three contributing factors to the reaction enthalpy are found to be similar in magnitude, where the net effect is in agreement with the measured enthalpy increase of 3.7 kJ (mol H2)−1 from the bulk value. Hydrogen absorption kinetics and capacity also improved, which is attributed to facile nucleation of the hydrogen-rich phase enabled by the inhomogeneous strain distribution over the encapsulated PdHx nanoparticles. These results demonstrate that the chemomechanical effect can be controlled in the nanolaminate structure, providing an ideal template for tuning hydrogen storage performance.

Batteries based on solid-state electrolytes, including Li

Nanoencapsulation using graphene derivatives enables the facile fabrication of two-dimensional (2D) nanocomposites with unique microstructures and has been generally applied to many fields of energy materials. Particularly, metal hydrides such as MgH

Chemical interactions on the surface of a functional nanoparticle are closely related to its crystal facets, which can regulate the corresponding energy storage properties like hydrogen absorption. In this study, we reported a one-step growth of magnesium (Mg) particles with both close- and nonclose-packed facets, that is, {0001} and {21¯ 1¯ 6} planes, on atomically thin reduced graphene oxide (rGO). The detailed microstructures of Mg/rGO hybrids were revealed by X-ray diffraction, selected-area electron diffraction, high-resolution transmission electron microscopy, and fast Fourier transform analysis. Hydrogen storage performance of Mg/rGO hybrids with different orientations varies: Mg with preferential high-index {21¯ 1¯ 6} crystal surface shows remarkably increased hydrogen absorption up to 6.2 wt % compared with the system exposing no preferentially oriented crystal surfaces showing inferior performance of 5.1 wt % within the first 2 h. First-principles calculations revealed improved hydrogen sorption properties on the {21¯ 1¯ 6} surface with a lower hydrogen dissociation energy barrier and higher stability of hydrogen atoms than those on the {0001} basal plane, supporting the hydrogen uptake experiment. In addition, the hydrogen penetration energy barrier is found to be much lower than that of {0001} because of low surface atom packing density, which might be the most critical process to the hydrogenation kinetics. The experimental and calculation results present a new handle for regulating the hydrogen storage of metal hydrides by controlled Mg facets.

Magnesium borohydride (Mg(BH4)2, abbreviated here MBH) has received tremendous attention as a promising onboard hydrogen storage medium due to its excellent gravimetric and volumetric hydrogen storage capacities. While the polymorphs of MBH-alpha (α), beta (β), and gamma (γ)-have distinct properties, their synthetic homogeneity can be difficult to control, mainly due to their structural complexity and similar thermodynamic properties. Here, we describe an effective approach for obtaining pure polymorphic phases of MBH nanomaterials within a reduced graphene oxide support (abbreviated MBHg) under mild conditions (60-190 °C under mild vacuum, 2 Torr), starting from two distinct samples initially dried under Ar and vacuum. Specifically, we selectively synthesize the thermodynamically stable α phase and metastable β phase from the γ-phase within the temperature range of 150-180 °C. The relevant underlying phase evolution mechanism is elucidated by theoretical thermodynamics and kinetic nucleation modeling. The resulting MBHg composites exhibit structural stability, resistance to oxidation, and partially reversible formation of diverse [BH4]- species during de- and rehydrogenation processes, rendering them intriguing candidates for further optimization toward hydrogen storage applications.

Layered boron compounds have attracted significant interest in applications from energy storage to electronic materials to device applications, owing in part to a diversity of surface properties tied to specific arrangements of boron atoms. Here we report the energy landscape for surface atomic configurations of MgB2 by combining first-principles calculations, global optimization, material synthesis and characterization. We demonstrate that contrary to previous assumptions, multiple disordered reconstructions are thermodynamically preferred and kinetically accessible within exposed B surfaces in MgB2 and other layered metal diborides at low boron chemical potentials. Such a dynamic environment and intrinsic disordering of the B surface atoms present new opportunities to realize a diverse set of 2D boron structures. We validated the predicted surface disorder by characterizing exfoliated boron-terminated MgB2 nanosheets. We further discuss application-relevant implications, with a particular view towards understanding the impact of boron surface heterogeneity on hydrogen storage performance., Layered boron compounds attract enormous interest in applications. This work reports first-principles calculations coupled with global optimization to show that the outer boron surface in MgB2 nanosheets undergo disordering and clustering, which is experimentally confirmed in synthesized MgB2 nanosheets.

An investigation is reported of possible kinetic limitations to MgB2 hydrogenation. The role of H–H bond breaking, a necessary first step in the hydrogenation process, is assessed for bulk MgB2, ball-milled MgB2, as well as MgB2 mixed with Pd, Fe and TiF3 additives. The Pd and Fe additives in the MgB2 material exist as dispersed metallic particles in the size range ~5–40 nm diameter. In contrast, TiF3 reacts with MgB2 to form Ti metal, elemental B and MgF2, with the Ti and the MgF2 phases proximate to each other and coating the MgB2 particulates with a film of thickness ~3 nm. Sieverts studies of hydrogenation kinetics are reported and compared to the rate of H–H bond breaking as measured by H-D exchange studies. The results show that H–H bond dissociation does not limit the rate of hydrogenation of MgB2 because H–H bond cleavage occurs rapidly compared to the initial MgB2 hydrogenation. The results also show that surface diffusion of hydrogen atoms cannot be a limiting factor for MgB2 hydrogenation. Instead, it is speculated that it is the intrinsic stability of the B–B extended hexagonal ring structure in MgB2 that hinders the hydrogenation of this material. This supposition is supported by B K-edge x-ray absorption measurements of the materials, which showed spectroscopically that the B–B ring was intact in the material systems studied. The TiF3/MgB2 system was examined further theoretically with reaction thermodynamics and phase nucleation kinetic calculations to better understand the production of Ti metal when TiB2 is thermodynamically favored. The results show that there exist physically reasonable ranges for which nucleation kinetics supersede thermodynamics in determining the reactive pathway for the TiF3/MgB2 system and perhaps for other additive systems as well.

Complex light metal hydrides are promising candidates for efficient, compact solid-state hydrogen storage. (De)hydrogenation of these materials often proceeds via multiple reaction intermediates, the energetics of which determine reversibility and kinetics. At the solid-state reaction front, molecular-level chemistry eventually drives the formation of bulk product phases. Therefore, a better understanding of realistic (de)hydrogenation behavior requires considering possible reaction products along all stages of morphological evolution, from molecular to bulk crystalline. Here, we use first-principles calculations to explore the interplay between intermediate morphology and reaction pathways. Employing representative complex metal hydride systems, we investigate the relative energetics of three distinct morphological stages that can be expressed by intermediates during solid-state reactions: i) dispersed molecules; ii) clustered molecular chains; and iii) condensed-phase crystals. Our results verify that the effective reaction energy landscape strongly depends on the morphological features and associated chemical environment, offering a possible explanation for observed discrepancies between X-ray diffraction and nuclear magnetic resonance measurements. Our theoretical understanding also provides physical and chemical insight into phase nucleation kinetics upon (de)hydrogenation of complex metal hydrides.

Hydrogen is a long-term clean energy carrier that enables completely carbon-free energy production. However, practical implementation of hydrogen fuel technologies is restricted because of lack of ...

Magnesium-based materials provide some of the highest capacities for solid-state hydrogen storage. However, efforts to improve their performance rely on a comprehensive understanding of thermodynamic and kinetic limitations at various stages of (de)hydrogenation. Part of the complexity arises from the fact that unlike interstitial metal hydrides that retain the same crystal structures of the underlying metals, MgH2 and other magnesium-based hydrides typically undergo dehydrogenation reactions that are coupled to a structural phase transformation. As a first step towards enabling molecular dynamics studies of thermodynamics, kinetics, and (de)hydrogenation mechanisms of Mg-based solid-state hydrogen storage materials with changing crystal structures, we have developed an analytical bond order potential for Mg-H systems. We demonstrate that our potential accurately reproduces property trends of a variety of elemental and compound configurations with different coordinations, including small clusters and bulk lattices. More importantly, we show that our potential captures the relevant (de)hydrogenation chemical reactions 2H (gas)→H2 (gas) and 2H (gas)+Mg (hcp)→MgH2 (rutile) within molecular dynamics simulations. This verifies that our potential correctly prescribes the lowest Gibbs free energies to the equilibrium H2 and MgH2 phases as compared to other configurations. It also indicates that our molecular dynamics methods can directly reveal atomic processes of (de)hydrogenation of the Mg-H systems.

Tavorite LiVPO4F has great potential as a cathode material due to its high energy density, superior thermal stability and fast kinetics. It has been controversial whether the redox reaction pathway of LiVPO4F is symmetric or not, but the origin of such symmetric/asymmetric redox reaction pathways has not been clearly understood. By combining ab initio calculations with experiments, we found that oxygen defects on fluorine sites, OF−, can be a key factor that affects the symmetry of the redox pathway of LiVPO4F1−δOδ (δ < 1). The computational results indicate that (1) the thermodynamically metastable ‘triclinic’ polymorph of VPO4F1−δOδ, which maintains the structural symmetry of LiVPO4F, can be kinetically stabilized considering its marginally higher energy than the stable ‘monoclinic’ phase; and (2) the OF− defects slightly destabilize the intermediate phase (x = 0.667) (Li0.667VPO4F versus Li0.667VPO4F0.917O0.083), inferring that the presence of OF− defects can induce the asymmetric redox pathway of LiVPO4F1−δOδ. We also experimentally found that the concentration of OF− defects is critically affected by the synthesis process of LiVPO4F, and VPO4F with lower OF− concentration can support the possible presence of the metastable (triclinic) phase, leading to the redox pathway being prone to being symmetric. Therefore, controlling oxygen defects by a synthesis processes can affect electrochemical performance via different redox reaction pathways of LiVPO4F. This understanding provides further possibilities for improving the electrochemical performance.

Additively manufactured 316L stainless steels (316L SS) using laser powder bed fusion technique (L-PBF) exhibit an excellent combination of high strength and ductility compared to the conventional counterpart. The outstanding material mechanical properties originate from the sub-grain cellular structures developed during the rapid solidification inherent to L-PBF. These structures consist of elongated cells decorated by high density of dislocations, trapped solute, and fine precipitates at their boundaries. The impact of such cellular structures on corrosion resistances, however, remains incompletely understood. In addition, the L-PBF process leads to high surface roughness and usually around 0.1 to 0.5% of porosity. However, the pitting potential of the L-PBF 316L SS can be an order of magnitude higher than the conventional, well annealed counterpart. In this talk, we will first present a detailed multi-scale characterization of the microstructural features unique to L-PBF 316L SS. In a second part, we will present our experimental-simulation integration approach where we combine surface chemistry mapping and electron and atomic force microscopy with multi-scale simulations to understand the effect of local microstructure variations on pitting and metal dissolution rates in NaCl and HCl environments. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. Authors acknowledge the support of the Laboratory Directed Research and Development (LDRD) program (20-SI-004) at LLNL.

The authors and journal retract the article, “Achievement of Gradual Conductance Characteristics Based on Interfacial Phase-Change Memory for Artificial Synapse Applications” [...]

In this paper, an interfacial phase change memory (iPCM) based on superlattice (SL) structure was fabricated by stacking GeTe/Sb2Te3 alternatively, and synaptic characteristics such as linearity and symmetry of long-term potentiation (LTP)/long-term depression (LTD) were measured by Keithley 4200A-CSC parameter analyzer. The conventional phase change memory (PCM) based on Ge-Sb-Te alloy with the identical bottom electrode contact size was also fabricated for comparison.

Magnesium has a different crystal structure from its dihydride with hydrogenation leading to a phase transition from the hexagonal closely packed Mg into a tetragonal $\ensuremath{\alpha}\text{\ensuremath{-}}\mathrm{Mg}{\mathrm{H}}_{2}$ rutile type structure. Such materials exhibit complex hydrogen uptake and release kinetics because hydrogen diffusivities significantly change when the crystal structure changes. To provide a foundational understanding of (de)hydrogenation kinetics that is applicable to all stages of the reaction, we performed statistically averaged molecular dynamics simulations to derive hydrogen diffusivities as a function of temperature and hydrogen content for both magnesium and magnesium hydride. Our studies confirm that hydrogen diffusivities in magnesium hydride are much lower than in magnesium, in agreement with experimental data. Additionally, we observe that in either magnesium or magnesium hydride, higher hydrogen compositions result in reduced diffusivities. The latter was not revealed by prior experiments, which were conducted at fixed hydrogen composition. Finally, we discover a non-Arrhenius behavior in magnesium hydride. The physical origin of this behavior is also discussed.

Metal borides have attracted the attention of researchers due to their useful physical properties and unique ability to form high hydrogen-capacity metal borohydrides. We demonstrate improved hydrogen storage properties of a nanoscale Mg-B material made by surfactant ball milling MgB2 in a mixture of heptane, oleic acid, and oleylamine. Transmission electron microscopy data show that Mg-B nanoplatelets are produced with sizes ranging from 5 to 50 nm, which agglomerate upon ethanol washing to produce an agglomerated nanoscale Mg-B material of micron-sized particles with some surfactant still remaining. X-ray diffraction measurements reveal a two-component material where 32% of the solid is a strained crystalline solid maintaining the hexagonal structure with the remainder being amorphous. Fourier transform infrared shows that the oleate binds in a "bridge-bonding"fashion preferentially to magnesium rather than boron, which is confirmed by density functional theory calculations. The Mg-B nanoscale material is deficient in boron relative to bulk MgB2 with a Mg-B ratio of ∼1:0.75. The nanoscale MgB0.75 material has a disrupted B-B ring network as indicated by X-ray absorption measurements. Hydrogenation experiments at 700 bar and 280 °C show that it partially hydrogenates at temperatures 100 °C below the threshold for bulk MgB2 hydrogenation. In addition, upon heating to 200 °C, the H-H bond-breaking ability increases ∼10-fold according to hydrogen-deuterium exchange experiments due to desorption of oleate at the surface. This behavior would make the nanoscale Mg-B material useful as an additive where rapid H-H bond breaking is needed.

To meet the growing demand for global electrical energy storage, high‐energy‐density electrode materials are required for Li‐ion batteries. To overcome the limit of the theoretical energy density in conventional electrode materials based solely on the transition metal redox reaction, the oxygen redox reaction in electrode materials has become an essential component because it can further increase the energy density by providing additional available electrons. However, the increase in the contribution of the oxygen redox reaction in a material is still limited due to the lack of understanding its controlled parameters. Here, it is first proposed that Li‐transition metals (TMs) inter‐diffusion between the phases in Li‐rich materials can be a key parameter for controlling the oxygen redox reaction in Li‐rich materials. The resulting Li‐rich materials can achieve fully exploited oxygen redox reaction and thereby can deliver the highest reversible capacity leading to the highest energy density, ≈1100 Wh kg−1 among Co‐free Li‐rich materials. The strategy of controlling Li/transition metals (TMs) inter‐diffusion between the phases in Li‐rich materials will provide feasible way for further achieving high‐energy‐density electrode materials via enhancing the oxygen redox reaction for high‐performance Li‐ion batteries., A new key parameter for fully exploiting the oxygen redox reaction by Li/transition metals (TMs) inter‐diffusion between the two phases in Co‐free Li‐rich materials is first proposed. The resulting Li‐rich materials can achieve fully exploited oxygen redox reaction and thereby can deliver the highest reversible capacity leading to the highest energy density, ≈1100 Wh kg−1 among Co‐free Li‐rich materials.

Cell-permeable Parkin ameliorates Parkinson’s disease-like phenotypes induced by mitochondrial poisons and aggregated α-synuclein., Parkinson’s disease (PD) is a progressive neurodegenerative disorder characterized by mitochondrial dysfunction, Lewy body formation, and loss of dopaminergic neurons. Parkin, an E3 ubiquitin ligase, is thought to inhibit PD progression by removing damaged mitochondria and suppressing the accumulation of α-synuclein and other protein aggregates. The present study describes a protein-based therapy for PD enabled by the development of a cell-permeable Parkin protein (iCP-Parkin) with enhanced solubility and optimized intracellular delivery. iCP-Parkin recovered damaged mitochondria by promoting mitophagy and mitochondrial biogenesis and suppressed toxic accumulations of α-synuclein in cells and animals. Last, iCP-Parkin prevented and reversed declines in tyrosine hydroxylase and dopamine expression concomitant with improved motor function induced by mitochondrial poisons or enforced α-synuclein expression. These results point to common, therapeutically tractable features in PD pathophysiology, and suggest that motor deficits in PD may be reversed, thus providing opportunities for therapeutic intervention after the onset of motor symptoms.

Magnesium borohydride (Mg(BH

Knowledge and foundational understanding of phenomena associated with the behavior of materials at the nanoscale is one of the key scientific challenges toward a sustainable energy future. Size reduction from bulk to the nanoscale leads to a variety of exciting and anomalous phenomena due to enhanced surface-to-volume ratio, reduced transport length, and tunable nanointerfaces. Nanostructured metal hydrides are an important class of materials with significant potential for energy storage applications. Hydrogen storage in nanoscale metal hydrides has been recognized as a potentially transformative technology, and the field is now growing steadily due to the ability to tune the material properties more independently and drastically compared to those of their bulk counterparts. The numerous advantages of nanostructured metal hydrides compared to bulk include improved reversibility, altered heats of hydrogen absorption/desorption, nanointerfacial reaction pathways with faster rates, and new surface states capable of activating chemical bonds. This review aims to summarize the progress to date in the area of nanostructured metal hydrides and intends to understand and explain the underpinnings of the innovative concepts and strategies developed over the past decade to tune the thermodynamics and kinetics of hydrogen storage reactions. These recent achievements have the potential to propel further the prospects of tuning the hydride properties at nanoscale, with several promising directions and strategies that could lead to the next generation of solid-state materials for hydrogen storage applications.

TiCl3 and TiF3 additives are known to facilitate hydrogenation and dehydrogenation in a variety of hydrogen storage materials, yet the associated mechanism remains under debate. Here, experimental and computational studies are reported for the reactivity with hydrogen gas of bulk and ball-milled TiCl3 and TiF3 at the temperatures and pressures for which these additives are observed to accelerate reactions when added to hydrogen storage materials. TiCl3, in either the α or δ polymorphic forms and of varying crystallite size ranging from ∼5 to 95 nm, shows no detectable reaction with prolonged exposure to hydrogen gas at elevated pressures (∼120 bar) and temperatures (up to 200 °C). Similarly, TiF3 with varying crystallite size from ∼4 to 25 nm exhibits no detectable reaction with hydrogen gas. Post-exposure vibrational and electronic structure investigations using Fourier transform infrared spectroscopy and x-ray absorption spectroscopy confirm this analysis. Moreover, there is no significant promotion of H2 dissociation at either interior or exterior surfaces, as demonstrated by H2/D2 exchange studies on pure TiF3. The computed energy landscape confirms that dissociative adsorption of H2 on TiF3 surfaces is thermodynamically inhibited. However, Ti-based additives could potentially promote H2 dissociation at interfaces where structural and compositional varieties are expected, or else by way of subsequent chemical transformations. At interfaces, metallic states could be formed intrinsically or extrinsically, possibly enabling hydrogen-coupled electronic transfer by donating electrons.

Solid-state hydrogen storage materials undergo complex phase transformations in which kinetics are often limited by hydrogen diffusion that significantly changes during hydrogen uptake and release. Here we perform robust statistically-averaged molecular dynamics simulations to obtain a well-converged analytical expression for hydrogen diffusivity in bulk palladium that is valid throughout all stages of the reaction. Our studies confirm the experimentally observed dependence of the diffusivity on concentration and temperature and elucidate the underlying physics. Whereas at low hydrogen concentrations, a single dilute hopping barrier dominates, at high hydrogen concentrations, diffusion exhibits multiple hopping barriers corresponding to hydrogen-rich and hydrogen-poor local environments.

We herein describe a simple, enzyme-free, and label-free strategy for the detection of miRNA based on target-triggered catalytic hairpin assembly (CHA) and fluorescence enhancement of DNA-silver nanoclusters (DNA-AgNCs). This strategy employs two hairpin probes that are rationally designed to contain AgNCs and guanine (G)-rich DNA sequence, respectively. In principle, the two hairpin probes, which exist independently, form a hybridized complex in the presence of target miRNA through CHA reaction, thereby inducing strong fluorescence signal of AgNCs by the presence of G-rich sequence placed in close proximity. Importantly, target miRNA is released after the first CHA reaction, which promotes another CHA reaction, consequently leading to the significantly enhanced fluorescence signal of AgNCs. Based on this one-step, homogeneous, and isothermal amplification method, we successfully detected the target miRNA with high selectivity and sensitivity. In addition, the practical applicability of this strategy was also demonstrated by analyzing the target miRNA in human serum.

Robust time-averaged molecular dynamics has been developed to calculate finite-temperature elastic constants of a single crystal. We find that when the averaging time exceeds a certain threshold, the statistical errors in the calculated elastic constants become very small. We applied this method to compare the elastic constants of Pd and PdH0.6 at representative low (10 K) and high (500 K) temperatures. The values predicted for Pd match reasonably well with ultrasonic experimental data at both temperatures. In contrast, the predicted elastic constants for PdH0.6 only match well with ultrasonic data at 10 K; whereas, at 500 K, the predicted values are significantly lower. We hypothesize that at 500 K, the facile hydrogen diffusion in PdH0.6 alters the speed of sound, resulting in significantly reduced values of predicted elastic constants as compared to the ultrasonic experimental data. Literature mechanical testing experiments seem to support this hypothesis.

Two zinc-aminoclays [ZnACs] with functionalized primary amines [(-CH2)3NH2] were prepared by a simple sol-gel reaction using cationic metal precursors of ZnCl2 and Zn(NO3)2 with 3-aminopropyl triethoxysilane [APTES] under ambient conditions. Due to the facile interaction of heavy metals with primary amine sites and Zn-related intrinsic antimicrobial activity, toxicity assays of ZnACs nanoparticles (NPs) prior to their environmental and human-health applications are essential. However, such reports remain rare. Thus, in the present study, a cell viability assay of in-vitro HeLa cells comparing ZnCl2, Zn(NO3)2 salts, and ZnO (~50 nm average diameter) NPs was performed. Interestingly, compared with the ZnCl2, and Zn(NO3)2 salts, and ZnO NPs (18.73/18.12/51.49 µg/mL and 18.12/15.19/46.10 µg/mL of IC50 values for 24 and 48 h), the two ZnACs NPs exhibited the highest toxicity (IC50 values of 21.18/18.36 µg/mL and 18.37/17.09 µg/mL for 24 and 48 h, respectively), whose concentrations were calculated on Zn elemental composition. This might be due to the enhanced bioavailability and uptake into cells of ZnAC NPs themselves and their positively charged hydrophilicity by reactive oxygen species (ROS) generation, particularly as ZnACs exist in cationic NP's form, not in released Zn2+ ionic form (i.e., dissolved nanometal). However, in an in-vivo embryotoxicity assay in zebrafish, ZnACs and ZnO NPs showed toxic effects at 50–100 µg/mL (corresponding to 37.88–75.76 of Zn wt% µg/mL). The hatching rate (%) of zebrafish was lowest for the ZnO NPs, particularly where ZnAC-[(NO3)2] is slightly more toxic than ZnAC-[Cl2]. These results are all very pertinent to the issue of ZnACs’ potential applications in the environmental and biomedical fields.

Solid-state metal hydrides are prime candidates to replace compressed hydrogen for fuel cell vehicles due to their high volumetric capacities. Sodium aluminum hydride has long been studied as an archetype for higher-capacity metal hydrides, with improved reversibility demonstrated through the addition of titanium catalysts; however, atomistic mechanisms for surface processes, including hydrogen desorption, are still uncertain. Here, operando and ex situ measurements from a suite of diagnostic tools probing multiple length scales are combined with ab initio simulations to provide a detailed and unbiased view of the evolution of the surface chemistry during hydrogen release. In contrast to some previously proposed mechanisms, the titanium dopant does not directly facilitate desorption at the surface. Instead, oxidized surface species, even on well-protected NaAlH

Current methods for a process simulation cannot simulate the cutting-process flexibly. As is, to simulate a cutting-process, the user needs to prepare the cut product models of the cutting operation based on a cutting path and thickness with respect to a dismantling scenario in advance. In addition, the user need to build these preparations again as the scenario changes, which takes a lot of time. To solve this problem, we proposed a flexible cutting-process simulation methodology containing an automatic cut-product generation in the cutting-process modeling procedure. The cut products are created through CAD operations with the selected device models and the cutting path, which is input by the user. In addition, we implemented the methodology on a commercial system used to test the methodology.

This paper is intended to suggest an approach to an estimation of the work time to optimize the trajectories of workers during decommissioning of nuclear facilities. The working times during decommissioning for nuclear facilities have a great effect on safety and costs. The key feature of this work is to analyze and to evaluate the working times in virtual decommissioning environments. The measured data are statistically analyzed into the mean and variance work time and radiation exposure dose. It is expected that the safety of decommissioning will be improved and decommissioning costs can be reduced. It can be concluded that this work will make it possible to efficiently establish the ALARA plan for decommissioning of nuclear facilities.

Lithium-ion batteries are now reaching the energy density limits set by their electrode materials, requiring new paradigms for Li(+) and electron hosting in solid-state electrodes. Reversible oxygen redox in the solid state in particular has the potential to enable high energy density as it can deliver excess capacity beyond the theoretical transition-metal redox-capacity at a high voltage. Nevertheless, the structural and chemical origin of the process is not understood, preventing the rational design of better cathode materials. Here, we demonstrate how very specific local Li-excess environments around oxygen atoms necessarily lead to labile oxygen electrons that can be more easily extracted and participate in the practical capacity of cathodes. The identification of the local structural components that create oxygen redox sets a new direction for the design of high-energy-density cathode materials.

This study is intended to suggest an ergonomic evaluation on the working postural comfort. This study issued for the first time a methodology in view of combination between visual field and comfort. Especially, the ergonomic evaluation using the virtual decommissioning environments is user-friendly because setup of physical mock-up environments is difficult. This study verified the front and standing postures are best working postures during movement under radiation environments of nuclear facilities. It is expected that this methodology will make it possible to establish the ergonomic plan for decommissioning of nuclear facilities and safety of decommissioning will be improved and also decommissioning costs also can be reduced.

This paper is intended to suggest an approach to the methodology of evaluation on abnormal accidents from human errors during decommissioning of nuclear facilities. A structure of model was established and a mathematical method was also designed to evaluate both normal and abnormal environments. The proposed methodology was verified by applying a practical test case of decommissioning scenarios using the assessment system in virtual decommissioning environment.