Search

Alginate encapsulation is a well-known technique used to protect microorganisms from adverse conditions. However, it is also known that the viscosity of the alginate is dependent on its composition and degree of polymerization and that thermal treatments, such as pasteurization and sterilization, can affect the structure of the polymer and decrease its protection efficiency. The goal of this study was to evaluate the protective effect of encapsulation, using alginates of different viscosities treated at different temperatures, on Lactiplantibacillus plantarum 299v under in vitro gastrointestinal conditions and cold storage at 4 °C and -15 °C, respectively. Steady- and dynamic-shear rheological tests were used to characterize the polymers. Thermal treatments profoundly affected the rheological characteristics of alginates with high and low viscosity. However, the solutions and gels of the low-viscosity alginate were more affected at a temperature of 117 °C. The capsules elaborated with high-viscosity alginate solution and pasteurized at 63 °C for 30 min provided better protection to the cells of L. plantarum 299v under simulated gastrointestinal and cold storage conditions.

Prebiotic effects have been attributed to agave fructans through bacterial and yeast fermentations, but there are few reports on their use as raw materials of a carbon source. Kefir milk is a fermented drink with lactic acid bacteria and yeast that coexist in a symbiotic association. During fermentation, these microorganisms mainly consume lactose and produce a polymeric matrix called kefiran, which is an exopolysaccharide composed mainly of water-soluble glucogalactan, suitable for the development of bio-degradable films. Using the biomass of microorganisms and proteins together can be a sustainable and innovative source of biopolymers. In this investigation, the effects of lactose-free milk as a culture medium and the addition of other carbon sources (dextrose, fructose, galactose, lactose, inulin and fructans) in concentrations of 2, 4 and 6% w / w , coupled with initial parameters such as temperature (20, 25 and 30 °C), % of starter inoculum (2, 5 and 10% w / w ) was evaluated. The method of response surface analysis was performed to determine the optimum biomass production conditions at the start of the experiment. The response surface method showed that a 2% inoculum and a temperature of 25 °C were the best parameters for fermentation. The addition of 6% w / w agave fructans in the culture medium favored the growth of biomass (75.94%) with respect to the lactose-free culture medium. An increase in fat (3.76%), ash (5.57%) and protein (7.12%) content was observed when adding agave fructans. There was an important change in the diversity of microorganisms with an absence of lactose. These compounds have the potential to be used as a carbon source in a medium culture to increase kefir granule biomass. There was an important change in the diversity of microorganisms with an absence of lactose, where the applied image digital analysis led to the identification of the morphological changes in the kefir granules through modification of the profile of such microorganisms.

Encapsulation is a process in which a base material is encapsulated in a wall material that can protect it against external factors and/or improve its bioavailability. Among the different encapsulation techniques, ionic gelation stands out as being useful for thermolabile compounds. The aim of this work was to encapsulate Saccharomyces boulardii by ionic gelation using agavins (A) and whey protein (WP) as wall materials and to evaluate the morphostructural changes that occur during in vitro gastrointestinal digestion. Encapsulations at different levels of A and WP were analyzed using microscopic, spectroscopic and thermal techniques. Encapsulation efficiency and cell viability were evaluated. S. boulardii encapsulated at 5% A: 3.75% WP (AWB6) showed 88.5% cell survival after the simulated gastrointestinal digestion; the bead showed a significantly different microstructure from the controls. The mixture of A and WP increased in the survival of S. boulardii respect to those encapsulated with alginate, A or WP alone. The binary material mixture simultaneously allowed a controlled release of S. boulardii by mostly diffusive Fickian mechanisms and swelling. The cell-release time was found to control the increment of the Damköhler number when A and WP were substrates for S. boulardii , in this way allowing greater protection against gastrointestinal conditions.

The objective of this work was to obtain biomaterials as gelatin films or biofilms produced by casting, reinforced with a microfiber (MF) from Agave angustifolia Haw bagasse and bentonite (BN) nanoparticles and evaluate the effect of such reinforcements at different concentrations. Agave microfibers were obtained by a non-abrasive chemical method. Three formulations based on gelatin with glycerol were reinforced with microfiber, bentonite and both materials with 1.5, 3.5 and 5.5% w / w solids content. Physicochemical properties were determined using SEM and FTIR, thickness, soluble matter and moisture. The XRD, barrier, mechanical and thermal properties were measured. The films' micrographs showed agglomerations on the surface. Interactions between its functional groups were found. The solubility increased when the MF concentration increased. The thickness of the films was between 60 and 110 μm. The crystallinity ranged from 23 to 86%. The films with both MF and BN and 3.5% w / w solids had the lowest barrier properties, while the film with 5.5% w / w solids showed the highest mechanical properties, being thermally resistant. Overall, Agave microfibers together with bentonite were able to improve some of the films' properties, but optimized mixing conditions had to be used to achieve good particle dispersion within the gelatin matrix to improve its final properties. Such materials might have the potential to be used as food packaging.

Pterygium is a corneal alteration that can cause visual impairment, which has been traditionally treated with the sap of Sedum dendroideum D.C. The pharmacological effect of a dichloromethane extract of S. dendroideum was demonstrated and implemented in a pterygium model on the healing process of corneal damage caused by phorbol esters. In mice of the ICR strain, a corneal lesion was caused by intravitreal injection of tetradecanoylphorbol acetate (TPA). The evolution of the corneal scarring process was monitored with vehicle, dexamethasone, and dichloromethane extract of S. dendroideum treatments by daily ophthalmic administration for fifteen days. The lesions were evaluated in situ with highlighted images of fluorescence of the lesions. Following treatment levels in eyeballs of IL-1α, TNF-α, and IL-10 cytokines were measured. The effective dose of TPA to produce a pterygium-like lesion was determined. The follow-up of the evolution of the scarring process allowed us to define that the treatment with S. dendroideum improved the experimental pterygium and had an immunomodulatory effect by decreasing TNF-α, IL-1α, and maintaining the level of IL-10 expression, without difference with respect to the healthy control. Traditional medical use of S. dendroideum sap to treat pterygium is fully justified by its compound composition.

Background: Research studies concerning the overall effect of the addition of plasticizers, cross-linking and strengthening agents in gelatin film-forming mixtures are very scarce. Also, there are no studies focused on the interactions among their individual components, or showing what sort of effects they might cause all together. A gelatin film obtained from a composite consisting of tannic acid, bentonite and glycerol was evaluated. Nine gelatin films were manufactured by the casting method, using these materials, following a 2(3) factorial design with five replicates on the central point., Results: The interactions among gelatin, tannic acid and bentonite caused a decrease in hydrogen bonds, while the polar groups of the gelatin chains were less exposed to interactions with water molecules. There was an increase in temperature and enthalpy of gelatin denaturation, due to increasing tannic acid and bentonite concentration. Tactoids were found in the gelatin films, caused mainly by bentonite polydispersion., Conclusions: A synergistic effect among tannic acid, bentonite and glycerol, which overall improved the measured gelatin film properties, was found. The best film formulation was that with 40, 150 and 250 g kg(-1) gelatin of tannic acid, bentonite and glycerol respectively, displaying a tensile strength of 38 MPa, an elongation at break of 136%, water vapor permeability of 1.28 × 10(-12) g (Pa s m)(-1) and solubility of 23.4%. © 2015 Society of Chemical Industry., (© 2015 Society of Chemical Industry.)

Masa or dough from nixtamalized maize with cassava (Cf) and malanga flour (Mf) addition at 20, 30 and 40 % (w/w) were prepared making seven treatments. The produced masas or doughs were subjected to chemical analysis, rheological and mechanical tests. Tortillas were manufactured from these doughs and mechanical tests were undertaken. Doughs from tubers had less protein and lipid content but higher nitrogen free extract than the control. All doughs presented weak viscoelastic gel-like behavior, with those of Mf behaving mainly as viscous systems. Doughs with Cf showed lower decrease in both the elastic (G') and viscous (G") moduli than those with Mf. The adhesiveness and cohesiveness of doughs with Mf showed a higher reduction of maximum force than those with Cf. Tortillas with Cf were more elastic with higher tensile strength than those with Mf. Using Cf as partial substitution of maize might lower production costs, but Mf is not particularly suitable as maize substitute in tortilla production. Tortillas with 40 % (w/w) cassava flour, presented the highest preference on a sensory test.

The morphostructure of grain rice Morelos A-98 was characterized in five stages of physiological maturation, in order to generate morphometric information during the filling process. Micrographic images from optical and scanning electron microscopy coupled to a digital capture system were used. Images were digitally processed to measure different descriptors such as shape, fractal dimension, and surface texture. Results showed that, two weeks after anthesis, an accelerated grain filling was observed, particularly on those grains positioned in the distal panicle zone, compared to those located in the base of this one. As deposition of assimilates in the grain increased, the area and perimeter of the transversal cut of the grains also increased (P ≤ 0.05); meanwhile, the rounded shape factor tended to increase as well (P ≤ 0.05), while the elliptic shape factor decreased. As the dehydrated endosperm passed from "milky" to "doughy" stages, values of fractal dimension area and endosperm perimeter as well as surface texture values showed that grain borders tended to become smoother and that there was a greater structured endosperm area (P ≤ 0.05).

Background: Antioxidant and chelating activities were determined in protein hydrolysates that were produced by treating a protein isolate of a non-toxic genotype of Jatropha curcas with the protease preparation alcalase., Results: 50 min protein hydrolysate with a degree of hydrolysis of 31.7% showed highest antioxidant and chelating activity. These activities were also determined in six peptidic fractions that were separated by gel filtration chromatography of the 50 min hydrolysate. The lower-molecular-weight peptidic fractions had the highest antioxidant and chelating activities, which correlated with a higher content in antioxidant and chelating amino acids such as tyrosine and histidine., Conclusion: Results show that J. curcas represents a good source of bioactive peptides. This may be important for the revalorization of defatted J. curcas flour, a by-product resulting form oil extraction for biodiesel production. This is especially important in Third World and developing countries such as Mexico., (Copyright © 2011 Society of Chemical Industry.)