Search

The differentiation of clenbuterol abuse and unintentional ingestion from contaminated meat is crucial with respect to the valuation of an adverse analytical finding in human sports doping control. The proportion of the two enantiomers of clenbuterol may serve as potential discriminating parameter. For the determination of the individual enantiomers, specific methods were developed and validated for the different matrices under investigation based on chiral chromatography coupled to tandem mass spectrometry. Data are presented from the administration to humans of clenbuterol from a pharmaceutical preparation, and from cattle meat and liver containing residues. A shift in the proportion of the enantiomers in cattle meat is detected and this signature is also found in human urine after ingestion. Thus, an altered enantiomeric composition of clenbuterol may be used to substantiate athletes' claims following adverse analytical findings in doping control. However, in meat, the enantiomeric composition was found to be highly variable. Species as well as tissue dependent variances need to be considered in interpreting enantiomer discrimination. Analysis of post administration urines from a controlled experiment comparing the administration of racemic clenbuterol from a registered pharmaceutical preparation and the administration of residue-containing meat and liver (nonracemic mixture) from treated animals is reported. Furthermore doping control samples from Mexican U17 World Championship 2011 of the Fédération Internationale de Football Association (FIFA), with adverse analytical findings for clenbuterol, were re-analysed.

Besides the identification point system to assure adequate set-up of instrumentation, European Commission Decision 2002/657/EC includes performance criteria regarding relative ion abundances in mass spectrometry and chromatographic retention time. In confirmatory analysis, the relative abundance of two product ions, acquired in selected reaction monitoring mode, the ion ratio should be within certain ranges for confirmation of the identity of a substance. The acceptable tolerance of the ion ratio varies with the relative abundance of the two product ions and for retention time, CD 2002/657/EC allows a tolerance of 5%. Because of rapid technical advances in analytical instruments and new approaches applied in the field of contaminant testing in food products (multi-compound and multi-class methods) a critical assessment of these criteria is justified. In this study a large number of representative, though challenging sample extracts were prepared, including muscle, urine, milk and liver, spiked with 100 registered and banned veterinary drugs at levels ranging from 0.5 to 100 µg/kg. These extracts were analysed using SRM mode using different chromatographic conditions and mass spectrometers from different vendors. In the initial study, robust data was collected using four different instrumental set-ups. Based on a unique and highly relevant data set, consisting of over 39 000 data points, the ion ratio and retention time criteria for applicability in confirmatory analysis were assessed. The outcomes were verified based on a collaborative trial including laboratories from all over the world. It was concluded that the ion ratio deviation is not related to the value of the ion ratio, but rather to the intensity of the lowest product ion. Therefore a fixed ion ratio deviation tolerance of 50% (relative) is proposed, which also is applicable for compounds present at sub-ppb levels or having poor ionisation efficiency. Furthermore, it was observed that retention time shifts, when using gradient elution, as is common practice nowadays, are mainly observed for early eluting compounds. Therefore a maximum retention time deviation of 0.2 min (absolute) is proposed. These findings should serve as input for discussions on the revision of currently applied criteria and the establishment of a new, globally accepted, criterion document for confirmatory analysis. Copyright © 2016 John Wiley & Sons, Ltd.

In agriforensics, time of administration is often debated when illegal drug residues, such as clenbuterol, are found in frequently traded cattle. In this proof-of-concept work, the feasibility of obtaining retrospective timeline information from segmented calf tail hair analyses has been studied. First, an ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) hair analysis method was adapted to accommodate smaller sample sizes and in-house validated. Then, longitudinal 1 cm segments of calf tail hair were analyzed to obtain clenbuterol concentration profiles. The profiles found were in good agreement with calculated, theoretical positions of the clenbuterol residues along the hair. Following assessment of the average growth rate of calf tail hair, time of clenbuterol administration could be retrospectively determined from segmented hair analysis data. The data from the initial animal treatment study (n = 2) suggest that time of treatment can be retrospectively estimated with an error of 3-17 days.

Selective estrogen receptor modulators (SERMs), anti-estrogens and aromatase inhibitors are prohibited in human sports doping. However, they also present a risk of being used illegally in animal husbandry for fattening purposes. A method was developed and validated using UHPLC-MS/MS for the determination and confirmation of SERMs, anti-estrogens and aromatase inhibiters in bovine and porcine urine. This method was used in a survey of more than 200 bovine and porcine urine samples from Dutch farms. In 18 out of 103 porcine urine samples (17%) and two out of 114 bovine samples (2%) formestane, an aromatase inhibitor, was detected. None of the other compounds was detected. From human doping control it is known that formestane can, in some cases, be of natural origin. Analyses of reference samples from untreated bovine and porcine animals demonstrated the presence of formestane in bovine animals, but not yet in porcine animals. Future research will focus on whether the detected formestane in porcine and bovine urine is from endogenous or exogenous origin, using GC-c-IRMS.

According to EU legislation a confirmatory method used for residue analysis should be able to confirm the identity of a compound beyond reasonable doubt. To provide an adequate instrumental set-up, Commission Decision 2002/657/EC introduced the concept of "identification points". A second aspect to assure unequivocal confirmation, is the establishment of ion ratio and retention time criteria. Currently, the gold standard for confirmatory analysis of most veterinary drug residues is liquid chromatography (LC) coupled to tandem mass spectrometry (MS/MS) in selected reaction monitoring (SRM) acquisition mode, isolating one precursor ion and monitoring two a priori selected product ions, yielding 4 identification points. We comprehensively evaluated the use of different low and high resolution LC-MS(/MS) techniques and acquisition modes with respect to the selectivity of 100 veterinary drugs in liver, muscle and urine extracts aiming to critically review the currently established identification points system. A comparison among MS/MS in SRM mode with high resolution mass spectrometry (HRMS) in full scan, all ion fragmentation and targeted MS/MS was made based on a unique inter-laboratory study, which comprises 21 laboratories from four different continents and equipment from all major vendors. In total 186 samples were analysed yielding results for 9282 analyte/matrix combinations. It was observed that the false positive rate approximately doubles if no ion ratio criterion is applied indicating that this criterion is important to prevent false positive results. Full scan HRMS analysis, only monitoring the molecular ion and allowing a ±5 ppm mass tolerance is, in general, less selective than low resolution MS/MS using SRM, and thus full scan alone is considered not sufficient for confirmatory analysis. Furthermore, even though the number of data on all ion fragmentation and targeted MS/MS at high resolution was limited, based on the data obtained, it was observed that the acquisition mode as well as the mass resolution needed, very much depend on the matrix and the compound itself. For complex matrix extracts and non-selective compounds (worst-case situation), only targeted MS/MS, monitoring the precursor ion and a single product ion in HR-MS using a maximum of ±5 ppm mass deviation, leads to comparable selectivity and false positive and negative rate as SRM monitoring two product ions in LR-MS. We conclude that the currently applied identification point system as established in commission decision 2002/657/EC should be revised with respect to the allocation of identification points.

The effect of 17ß-19-nortestosterone (17ßNT) treatment of barrows on residue levels and growth was evaluated. Five barrows were treated three times during the fattening period with 17ßNT phenylpropionate (Nandrosol, nandrolone phenylpropionate 50¿mg/ml,1¿mg/kg body weight). Another five barrows were untreated and five boars (untreated) were kept as positive control. Boars and treated barrows showed a 13 and 9% improvement in growth compared to untreated barrows, with mean final body weights of 121.6, 117.8 and 109.0¿kg, respectively. The bulbourethral glands of the treated barrows were three times heavier than untreated barrows. The histology of the prostate and bulbourethral gland of the treated barrows was comparable to the boars, whereas the control barrows showed atrophic glands. Levels of 17ßNT ester in hair from treated barrows were high, whereas boars and untreated barrows did not show levels above LLQ. It is concluded that analysis of hair can detect illegal treatment with 17ßNT ester in barrows. The size of the bulbourethral gland can also be used for screening in the slaughterhouse.

Besides the identification point system to assure adequate set-up of instrumentation, European Commission Decision 2002/657/EC includes performance criteria regarding relative ion abundances in mass spectrometry and chromatographic retention time. In confirmatory analysis, the relative abundance of two product ions, acquired in selected reaction monitoring mode, the ion ratio should be within certain ranges for confirmation of the identity of a substance. The acceptable tolerance of the ion ratio varies with the relative abundance of the two product ions and for retention time, CD 2002/657/EC allows a tolerance of 5%. Because of rapid technical advances in analytical instruments and new approaches applied in the field of contaminant testing in food products (multi-compound and multi-class methods) a critical assessment of these criteria is justified. In this study a large number of representative, though challenging sample extracts were prepared, including muscle, urine, milk and liver, spiked with 100 registered and banned veterinary drugs at levels ranging from 0.5 to 100 µg/kg. These extracts were analysed using SRM mode using different chromatographic conditions and mass spectrometers from different vendors. In the initial study, robust data was collected using four different instrumental set-ups. Based on a unique and highly relevant data set, consisting of over 39 000 data points, the ion ratio and retention time criteria for applicability in confirmatory analysis were assessed. The outcomes were verified based on a collaborative trial including laboratories from all over the world. It was concluded that the ion ratio deviation is not related to the value of the ion ratio, but rather to the intensity of the lowest product ion. Therefore a fixed ion ratio deviation tolerance of 50% (relative) is proposed, which also is applicable for compounds present at sub-ppb levels or having poor ionisation efficiency. Furthermore, it was observed that retention time shifts, when using gradient elution, as is common practice nowadays, are mainly observed for early eluting compounds. Therefore a maximum retention time deviation of 0.2 min (absolute) is proposed. These findings should serve as input for discussions on the revision of currently applied criteria and the establishment of a new, globally accepted, criterion document for confirmatory analysis. Copyright © 2016 John WileySons, Ltd.

Selectivity of the confirmation of identity in liquid chromatography (tandem) mass spectrometry using Q-Orbitrap instrumentation was assessed using different acquisition modes based on a representative experimental data set constructed from 108 samples, including six different matrix extracts and containing over 100 analytes each. Single stage full scan, all ion fragmentation, and product ion scanning were applied. By generating reconstructed ion chromatograms using unit mass window in targeted MS(2), selected reaction monitoring (SRM), regularly applied using triple-quadrupole instruments, was mimicked. This facilitated the comparison of single stage full scan, all ion fragmentation, (mimicked) SRM, and product ion scanning applying a mass window down to 1 ppm. Single factor Analysis of Variance was carried out on the variance (s(2)) of the mass error to determine which factors and interactions are significant parameters with respect to selectivity. We conclude that selectivity is related to the target compound (mainly the mass defect), the matrix, sample clean-up, concentration, and mass resolution. Selectivity of the different instrumental configurations was quantified by counting the number of interfering peaks observed in the chromatograms. We conclude that precursor ion selection significantly contributes to selectivity: monitoring of a single product ion at high mass accuracy with a 1 Da precursor ion window proved to be equally selective or better to monitoring two transition products in mimicked SRM. In contrast, monitoring a single fragment in all ion fragmentation mode results in significantly lower selectivity versus mimicked SRM. After a thorough inter-laboratory evaluation study, the results of this study can be used for a critical reassessment of the current identification points system and contribute to the next generation of evidence-based and robust performance criteria in residue analysis and sports doping.

A new sensitive, fast and robust method for the determination of paraquat and diquat residues in potatoes, cereals and pulses is presented. Different extraction conditions (solvent, time and temperature) have been evaluated using barley grain, potatoes and dry lentils containing incurred residues of diquat and paraquat. The finalised procedure involves extraction with a mixture of methanol/water/hydrochloric acid at 80 °C and analysis by liquid chromatography-tandem mass spectrometry. Diquat D4 and Paraquat D6 internal standards were added to the test portions prior to extraction. A small-scale inter-laboratory validation of the developed method for diquat and paraquat using potato and barley samples was conducted by three laboratories. The precision and accuracy of the method were determined from recovery experiments (five replicates) at 0.01 and 0.1 mg kg(-1). The recoveries obtained (n = 180) were in the range of 92-120 % with associated relative standard deviation (RSD) between 1.4-10 % for all compound/commodity/spiking concentration combinations.

Atom lithography uses standing wave light fields as arrays of lenses to focus neutral atom beams into line patterns on a substrate. Laser cooled atom beams are commonly used, but an atom beam source with a small opening placed at a large distance from a substrate creates atom beams which are locally geometrically collimated on the substrate. These beams have local offset angles with respect to the substrate. We show that this affects the height, width, shape, and position of the created structures. We find that simulated effects are partially obscured in experiments by substrate-dependent diffusion of atoms, while scattering and interference just above the substrate limit the quality of the standing wave lens. We find that in atom lithography without laser cooling the atom beam source geometry is imaged onto the substrate by the standing wave lens. We therefore propose using structured atom beam sources to image more complex patterns on subwavelength scales in a massively parallel way. © The Author(s) 2011.

Strong sorption to black carbon may limit the environmental risks of organic pollutants, but interactions with cosorbing humic acid (HA) may interfere. We studied the attenuative effect of HA additions on the sorption of polychlorinated biphenyls (PCBs) to a charcoal. "Intrinsic" sorption to HA-amended charcoal was calculated by subtracting the sorption contribution of HA from the total sorption to charcoal and HA. Association of PCBs with HA was proportional to hydrophobicity. However, the planar PCBs 77 and 126 had an additional 2-4 times stronger association than expected from hydrophobicity alone. Sorption isotherms for the raw charcoal fitted slightly better to a three-parameter Polanyi-Dubinin-Manes model than to a two-parameter Langmuir model. Preloading the charcoal with 1-75 mg of HA/g of charcoal increasingly attenuated sorption to charcoal with up to a factor of 10. The resultant isotherms could be described adequately with the Freundlich model. Isotherm nonlinearity increased with HA loading, suggesting increased sorption competition between HA and PCBs. Attenuation was negligible in the PCB picogram per liter to nanogram per liter range and increased at higher PCB concentrations, which points to saturation of binding sites on the charcoal. Attenuation was highest for planar congeners, which suggests an additional site blockage mechanism. These variations due to HA loading and PCB concentration can explain the variability in attenuation reported in earlier work and imply that the use of constant "attenuation factors" to adjust sorption coefficients determined for pure carbonaceous materials in order to apply them to field situations may not be warranted.

The use of beta-agonists as growth promoters in cattle breeding is forbidden in many countries for reasons of fair trade and consumer protection. In recent years the use of liquid chromatography (LC) tandem mass spectrometry (MS/MS) has been shown to be the method of choice for the control of beta-agonists. In this study an LC-MS/MS multiresidue analysis method is presented for trace analysis of 22 beta-agonists. A truly generic concept has been designed based on mixed-mode solid-phase extraction and positive electrospray ionisation LC-MS/MS operated in the multiple reaction monitoring mode. This method allows application to a wide variety of sample matrices such as urine, feed and hair, following minor modifications to the analysis procedure only. The method features fit-for-purpose sensitivity in urine as shown by CCalpha and CCbeta values of less than 0.2 and less than 0.5 microg/l respectively, for all beta-agonists studied (terbutaline and reproterol, less than 0.3 and less than 1.0 respectively). Similar but semiquantitative application to feed and hair showed CCbeta values of less than 10.0 and less than 5.0 microg/kg, respectively. A further simplification and improvement is demonstrated using Ultra Performance LC (UPLC) and fast-switching MS/MS. The successful validation of this method following the latest EU requirements and its application to real samples demonstrate that a new versatile tool has been achieved for veterinary control of beta-agonists.

We present a protocol and calculation methods for the determination of zooplankton ingestion and assimilation rates with stable isotope tracers. These methods have been developed from experiments with the rotifer Brachionus calyciflorus that had been fed 13C-labelled Scenedesmus obliquus. Stable isotope tracers offer the same advantages as radioisotopes. These include the possibility for direct and accurate quantification of ingestion and assimilation rates, short sample analysis times and low animal densities requirements. However, the use of stable isotope tracers requires relatively long sample preparation times and specialist equipment and is, thus, relatively costly for most laboratories. The application of stable isotope tracers in zooplankton feeding studies offers several advantages in comparison with radioisotopes. Firstly, they do not emit harmful radiation and can therefore be applied safely both in the laboratory and in the field. Secondly, the samples can be dried for safe storage and easy transportation. Thirdly, no aggressive chemicals are required for sample analysis.

It is not clear whether sequestration or aging of organic chemicals like polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) limits accumulation in higher levels of aquatic food chains. Therefore, the effect of aging on accumulation was studied in 1(-m3) model ecosystems that mimicked fish-dominated, macrophyte-dominated, and fish- and macrophyte-dominated shallow lakes. Also treatments without fish and macrophytes were included. General characteristics, biomasses, total (Soxhlet-extractable), and labile (6-h Tenax-extractable) PCB and PAH concentrations in sediment and biota were monitored over time. Accumulation data for PCB 28, PCB 149, and fluoranthene (native to the sediment taken from the field) were compared to those for spiked analogues PCB 29, PCB 155, and fluoranthene-d10. Labile fractions for spiked compounds were higher than for their native analogues and decreased over time, suggesting sequestration in the sediment. In the majority of cases, 6-h Tenax-extractable concentrations correlated better with concentrations in biota than Soxhlet-extractable concentrations. Ecosystem structure affected food web accumulation, but replicate variability was too high to detect clear treatment effects. Differences in accumulation between spiked compounds and their native analogues indicated an effect of aging for invertebrates, macrophytes, and benthivorous fish. Thus, aging may translate directly into reduced uptake at higher trophic levels.