Search

In the electrocatalytic CO2 reduction reaction (CO2RR), metal catalysts with an oxidation state generally demonstrate more favorable catalytic activity and selectivity than their corresponding metallic counterparts. However, the persistence of oxidative metal sites under reductive potentials is challenging since the transition to metallic states inevitably leads to catalytic degradation. Herein, a thorough review of research on oxidation-state stabilization in the CO2RR is presented, starting from fundamental concepts and highlighting the importance of oxidation state stabilization while revealing the relevance of dynamic oxidation states in product distribution. Subsequently, the functional mechanisms of various oxidation-state protection strategies are explained in detail, and in situ detection techniques are discussed. Finally, the prevailing and prospective challenges associated with oxidation-state protection research are discussed, identifying innovative opportunities for mechanistic insights, technology upgrades, and industrial platforms to enable the commercialization of the CO2RR. [ABSTRACT FROM AUTHOR]

Background: Coprophagy plays a vital role in maintaining growth and development in many small herbivores. Here, we constructed a coprophagy model by dividing rabbits into three groups, namely, control group (CON), sham-coprophagy prevention group (SCP), and coprophagy prevention group (CP), to explore the effects of coprophagy prevention on growth performance and cecal microecology in rabbits. Results: Results showed that CP treatment decreased the feed utilization and growth performance of rabbits. Serum total cholesterol and total triglyceride in the CP group were remarkably lower than those in the other two groups. Furthermore, CP treatment destroyed cecum villi and reduced the content of short-chain fatty acids (SCFAs) in cecum contents. Gut microbiota profiling showed significant differences in the phylum and genus composition of cecal microorganisms among the three groups. At the genus level, the abundance of Oscillospira and Ruminococcus decreased significantly in the CP group. Enrichment analysis of metabolic pathways showed a significantly up-regulated differential metabolic pathway (PWY-7315, dTDP-N-acetylthomosamine biosynthesis) in the CP group compared with that in the CON group. Correlation analysis showed that the serum biochemical parameters were positively correlated with the abundance of Oscillospira, Sutterella, and Butyricimonas but negatively correlated with the abundance of Oxalobacte and Desulfovibrio. Meanwhile, the abundance of Butyricimonas and Parabacteroidesde was positively correlated with the concentration of butyric acid in the cecum. Conclusions: In summary, coprophagy prevention had negative effects on serum biochemistry and gut microbiota, ultimately decreasing the growth performance of rabbits. The findings provide evidence for further revealing the biological significance of coprophagy in small herbivorous mammals. [ABSTRACT FROM AUTHOR]

All-for-one tourism plays an increasingly important role in the development of national tourism, and rural landscape is endowed with multiple functions in all-for-one tourism pattern. After Yuan’an County was listed as the second batch of national all-in-one tourism demonstration zones, the establishment of all-in-one tourism puts forward higher requirements for the planning and promotion of rural landscape in Yuan’an County. By analyzing the status quo of rural landscape construction through landscape cultural characteristics, landscape differentiation and landscape management mechanism, combined with the current style of Luyuan Village in Yuan’an County, the paper discusses the promotion strategy and implementation approach of rural landscape in the perspective of all-region tourism from natural ecological landscape, settlement life landscape and economic production landscape, in order to bring new thinking for the improvement of rural landscape in China. [ABSTRACT FROM AUTHOR]

The voltage-dependent anion channel 1 (VDAC1), a pore protein located in the outer mitochondrial membrane, has been confirmed to be related to cancer in cell or animal evidence. However, there is no available pan-cancer analysis of VDAC1. Herein, we investigated the potential roles of VDAC1 in tumorigenesis and progression based on the Cancer Genome Atlas (TCGA), Gene Expression Omnibus (GEO), and Clinical Proteomic Tumor Analysis Consortium (CPTAC) datasets. The expression of VDAC1 increased in most cancers, and the upregulation of VDAC1 distinctly correlated with the poor prognosis in patients, including breast invasive carcinoma, cervical squamous cell carcinoma, pancreatic adenocarcinoma, lung adenocarcinoma, and skin cutaneous melanoma. We also found VDAC1 S104 phosphorylation raised in various cancers, such as breast cancer, colon cancer, and lung adenocarcinoma. Moreover, the expression of VDAC1 was related to the estimated infiltration value of cancer-associated fibroblasts in bladder urothelial carcinoma, colon adenocarcinoma, kidney renal papillary cell carcinoma, and testicular germ cell tumors. At last, we showed that VDAC1-related oxidative phosphorylation and metabolic regulation may partially explain its association with tumorigenesis and progression. Taken together, this pan-cancer analysis provides relatively comprehensive information on the potential value of VDAC1 as a prognostic biomarker and therapeutic target. [ABSTRACT FROM AUTHOR]

Developing robust electrocatalysts and advanced devices is important for electrochemical carbon dioxide (CO2) reduction toward the generation of valuable chemicals. We present herein a carbon‐confined indium oxide electrocatalyst for stable and efficient CO2 reduction. The reductive corrosion of oxidative indium to the metallic state during electrolysis could be prevented by carbon protection, and the applied carbon layer also optimizes the reaction intermediate adsorption, which enables both high selectivity and activity for CO2 reduction. In a liquid‐phase flow cell, the formate selectivity exceeds 90 % in a wide potential window from −0.8 V to −1.3 V vs. RHE. The continuous production of ca. 0.12 M pure formic acid solution is further demonstrated at a current density of 30 mA cm−2 in a solid‐state electrolyte mediated reactor. This work provides significant concepts in the parallel development of electrocatalysts and devices for carbon‐neutral technologies. [ABSTRACT FROM AUTHOR]

Developing robust electrocatalysts and advanced devices is important for electrochemical carbon dioxide (CO2) reduction toward the generation of valuable chemicals. We present herein a carbon‐confined indium oxide electrocatalyst for stable and efficient CO2 reduction. The reductive corrosion of oxidative indium to the metallic state during electrolysis could be prevented by carbon protection, and the applied carbon layer also optimizes the reaction intermediate adsorption, which enables both high selectivity and activity for CO2 reduction. In a liquid‐phase flow cell, the formate selectivity exceeds 90 % in a wide potential window from −0.8 V to −1.3 V vs. RHE. The continuous production of ca. 0.12 M pure formic acid solution is further demonstrated at a current density of 30 mA cm−2 in a solid‐state electrolyte mediated reactor. This work provides significant concepts in the parallel development of electrocatalysts and devices for carbon‐neutral technologies. [ABSTRACT FROM AUTHOR]

Bimetallic sulfides are expected to realize efficient CO2 electroreduction into formate over a wide potential window, however, they will undergo in situ structural evolution under the reaction conditions. Therefore, clarifying the structural evolution process, the real active site and the catalytic mechanism is significant. Here, taking Cu2SnS3 as an example, we unveiled that Cu2SnS3 occurred self‐adapted phase separation toward forming the stable SnO2@CuS and SnO2@Cu2O heterojunction during the electrochemical process. Calculations illustrated that the strongly coupled interfaces as real active sites driven the electron self‐flow from Sn4+ to Cu+, thereby promoting the delocalized Sn sites to combine HCOO* with H*. Cu2SnS3 nanosheets achieve over 83.4 % formate selectivity in a wide potential range from −0.6 V to −1.1 V. Our findings provide insight into the structural evolution process and performance‐enhanced origin of ternary sulfides under the CO2 electroreduction. [ABSTRACT FROM AUTHOR]

Bimetallic sulfides are expected to realize efficient CO2 electroreduction into formate over a wide potential window, however, they will undergo in situ structural evolution under the reaction conditions. Therefore, clarifying the structural evolution process, the real active site and the catalytic mechanism is significant. Here, taking Cu2SnS3 as an example, we unveiled that Cu2SnS3 occurred self‐adapted phase separation toward forming the stable SnO2@CuS and SnO2@Cu2O heterojunction during the electrochemical process. Calculations illustrated that the strongly coupled interfaces as real active sites driven the electron self‐flow from Sn4+ to Cu+, thereby promoting the delocalized Sn sites to combine HCOO* with H*. Cu2SnS3 nanosheets achieve over 83.4 % formate selectivity in a wide potential range from −0.6 V to −1.1 V. Our findings provide insight into the structural evolution process and performance‐enhanced origin of ternary sulfides under the CO2 electroreduction. [ABSTRACT FROM AUTHOR]

We report an amino‐functionalized indium‐organic framework for efficient CO2 reduction to formate. The immobilized amino groups strengthen the absorption and activation of CO2 and stabilize the active intermediates, which endow an enhanced catalytic conversion to formate despite the inevitable reduction and reconstruction of the functionalized indium‐based catalyst during electrocatalysis. The reconstructed amino‐functionalized indium‐based catalyst demonstrates a high Faradaic efficiency of 94.4 % and a partial current density of 108 mA cm−2 at −1.1 V vs. RHE in a liquid‐phase flow cell, and also delivers an enhanced current density of ca. 800 mA cm−2 at 3.4 V for the formate production in a gas‐phase flow cell configuration. This work not only provides a molecular functionalization and assembling concept of hybrid electrocatalysts but also offers valuable understandings in electrocatalyst evolution and reactor optimization for CO2 electrocatalysis and beyond. [ABSTRACT FROM AUTHOR]

We report an amino‐functionalized indium‐organic framework for efficient CO2 reduction to formate. The immobilized amino groups strengthen the absorption and activation of CO2 and stabilize the active intermediates, which endow an enhanced catalytic conversion to formate despite the inevitable reduction and reconstruction of the functionalized indium‐based catalyst during electrocatalysis. The reconstructed amino‐functionalized indium‐based catalyst demonstrates a high Faradaic efficiency of 94.4 % and a partial current density of 108 mA cm−2 at −1.1 V vs. RHE in a liquid‐phase flow cell, and also delivers an enhanced current density of ca. 800 mA cm−2 at 3.4 V for the formate production in a gas‐phase flow cell configuration. This work not only provides a molecular functionalization and assembling concept of hybrid electrocatalysts but also offers valuable understandings in electrocatalyst evolution and reactor optimization for CO2 electrocatalysis and beyond. [ABSTRACT FROM AUTHOR]

As a way to drive chemical reactions by renewable solar energy, photocatalytic technology is an appealing strategy for carbon recycle and value‐added CO2 utilization mimicking the natural photosynthetic system to remedy energy and environmental problems. During the recent decades of exploration, extensive research has been reported on 2D nanomaterials in photocatalytic CO2 reduction because of their unique structural properties. This review highlights the ongoing development of modification strategies for 2D nanomaterials from the viewpoints of defect engineering, surface modification, and hybrid construction, following the sequence of inside‐to‐outside design of the photocatalysts. These methodologies can expand the scope of light absorption, promote the separation of photogenerated charge carriers, and enhance the adsorption and activation of CO2, thus effectively improve the photocatalytic efficiency. The future challenges and opportunities for developing modified 2D photocatalysts are also discussed. It is hoped that this review can provide useful guidelines toward further research on 2D nanocatalysis for CO2 photocatalytic conversion. [ABSTRACT FROM AUTHOR]

• For the first time, first-principles calculations are used to predict the lattice thermal conductivity of free-standing monolayer XS2 (X = mo and W) and monolayer XS2 supported on SiC (0001) and ZnO (0001) substrates. • The lattice thermal conductivity of monolayer XS2 supported on SiC (0001) and ZnO (0001) substrates show a significant decrease, and the decrease is even greater for the monolayer XS2 supported on ZnO (0001) substrates, reaching about 65–70 %. • The substrate drives softening of the acoustic branch, making the low-frequency phonon group velocity decrease and the three-phonon scattering enhance. • From the perspective of atomic bonding, the substrate breaks the symmetry of bonding of monolayer XS2, which leads to the increase of phonon anharmonicity and ultimately to a decrease in thermal conductivity of monolayer XS2. Thermoelectric materials have properties such as direct conversion of waste heat into electricity and environmental friendliness, which make them promising for renewable energy utilization, however, the lower conversion efficiency limits the large-scale application of thermoelectric materials. Monolayer transition metal dichalcogenides (TMDs) are candidates for thermoelectric materials due to their high power factor, but their higher thermal conductivity (TC) limits the further improvement of the figure of merit (ZT). Here, we employ first-principles calculations and solve the Boltzmann transport equation (BTE) to compare the lattice TC of free-standing monolayer XS 2 (X = Mo and W) and monolayer XS 2 supported on SiC (0001) and ZnO (0001) substrates. We find that the lattice TC of monolayer XS 2 supported on SiC (0001) and ZnO (0001) substrates are sharply reduced. Especially supported on the ZnO (0001) substrate, the lattice TC of XS 2 reduce by 65 %–70 %, which is expected to improve the thermoelectric properties of monolayer XS 2. In addition, we report the underlying cause of this significant reduction in TC. Firstly, the substrate drives softening of the acoustic branch, which leads to a decrease of phonon group velocity in the low-frequency and an enhancement of the three-phonon scattering. Then, the asymmetric bonding of XS 2 is induced by the substrates, which enhance phonon anharmonicity and reduce the phonon lifetime. Our results demonstrate that the lattice TC of monolayer XS 2 can be tuned by adjusting the substrate, which has certain reference values for the thermoelectric design of XS 2. SiC (0001) and ZnO (0001) substrates break the symmetry of the monolayer XS 2 (X = Mo and W) bonding, resulting in an increase in phonon anharmonicity, which reduces the contribution of the low-frequency acoustic branch of monolayer XS 2 to the thermal conductivity. [Display omitted] [ABSTRACT FROM AUTHOR]

Background: With the progress of therapeutic drug monitoring (TDM) technology and the development of evidence-based medicine, many guidelines were developed and implemented in recent decades. Objective: The aim was to evaluate the current status of TDM guidelines and provide suggestions for their development and updates based on Appraisal of Guidelines for Research and Evaluation (AGREE) II. Methods: The TDM guidelines were systematically searched for among databases including PubMed, Embase, China National Knowledge Infrastructure, Wanfang Data, and the Chinese biomedical literature service system and the official websites of TDM-related associations. The search period was from inception to 6 April 2023. Four researchers independently screened the literature and extracted data. Any disagreement was discussed and reconciled by another researcher. The quality of guidelines was assessed using the AGREE II instrument. Results: A total of 92 guidelines were included, including 57 technical guidelines, three management guidelines, and 32 comprehensive guidelines. The number of TDM guidelines has gradually increased since 1979. The United States published the most guidelines (20 guidelines), followed by China (15 guidelines) and the United Kingdom (ten guidelines), and 23 guidelines were developed by international organizations. Most guidelines are aimed at adult patients only, while 28 guidelines include special populations. With respect to formulation methods, there are 23 evidence-based guidelines. As for quality evaluation results based on AGREE II, comprehensive guidelines scored higher (58.16%) than technical guidelines (51.36%) and administrative guidelines (50.00%). Conclusion: The number of TDM guidelines, especially technical and comprehensive ones, has significantly increased in recent years. Most guidelines are confronted with the problems of unclear methodology and low quality of evidence according to AGREE II. More evidence-based research on TDM and high-quality guideline development is recommended to promote individualized therapy. [ABSTRACT FROM AUTHOR]

[Display omitted] • Heterogeneous MnO 2 nanoparticles are uniformly embeded into laser-induced graphene. • MnO 2 /LIG electrodes with customizable shapes are assembled to planar micro-supercapacitors. • Planar MnO 2 /LIG-MSCs can be fabricated on a variety of flexible substrates. • Flexible MnO 2 /LIG-MSCs show excellent areal capacitance and electrochemical performances. • The addition of MnO 2 changes the hydrophobic properties of the electrode. Flexible planar microsupercapacitors (MSCs), with the advantages of small size, easy integration and expansion on electronic devices, have emerged as one of the most critical power devices in wearable and portable electronics. However, most processes involve independent preparation of electrode materials, patterned microelectrodes, and subsequent modular integration, making the steps very complicated. Herein, we have developed a novel, simple and one-step laser direct writing process to design planar shape-controllable MnO 2 nanoparticles evenly embedded in laser-induced graphene (MnO 2 /LIG) MSCs on different flexible substrates. The obtained MnO 2 /LIG MSCs show an outstanding areal specific capacity of 15.04 mF cm−2, a high energy density of 1.22 mWh cm−2 at a good power density of 1.278 mW cm−2, good mechanical flexibility and remarkable modular integration due to effective design of pseudocapacitive MnO 2 nanoparticles evenly embedded in highly conductive LIG with 3D porous structure. This universal manufacturing route for controllable assembly of flexible planar MSCs with other pseudocapacitive nanoparticles embedded into LIG, thus broadening their flexible and wearable application as a promising storage device to meet the modular integration and biocompatibility. [ABSTRACT FROM AUTHOR]

The temperature field due to laser-induced discharge surface strengthening (LIDSS) has significant influence on the microstructure transformation and also the formation quality of discharge pit. A transient axisymmetric thermal model is developed to estimate the temperature distribution during LIDSS based on Fourier heat conduction equation. In the model, a Gaussian heat input distribution is assumed; temperature-dependent material properties are applied and the latent heat of fusion and vaporization is calculated on an enthalpy method. As an application, we use this model to compute the temperature field during the process of tungsten tool electrode machining 1045 steel workpiece and find that the computational results are well consistent with the experimental data. [ABSTRACT FROM AUTHOR]

Several discharge areas by laser-guided discharge (LGD) were compared with those by common arc discharge. The randomicity of discharge areas by common arc discharge was controlled by laser guiding on two scales: large scale (the spacing of the discharge areas) and small scale (the inside of the discharge area). The position of the discharge area overlapped completely with a laser focus; therefore, the distribution and surface shape of the discharge areas were controlled. The stochastic movement of anode spot in the discharge area was controlled by laser guiding. As such, the repetitive melting and solidifying of microstructures in the discharge area was constrained. The tempered microstructures in the discharge area were voided, the utilization efficiency of input energy was improved, and the strengthened depth of the discharge areas was increased. The regularity of cross-sectional shape of the discharge area was also improved. The hardness of microstructures in both discharge areas is greater than that of the base material. The highest level of hardness of microstructures in both discharge areas measures above 1000 HV. In summary, the hardness of microstructures in the discharge area by LGD is larger and more discrete than that by common arc discharge. [ABSTRACT FROM AUTHOR]

This paper studies the surface melting in the atmosphere by YAG laser-guided micro-arc discharge. In three kinds of surface conditions (free, oiled, and polyethylene covered), we try to control the diameter and the power density of discharge pit. It is found that the power density of 3 × 106 W/cm2 of discharge pit on the oiled surface is moderate to form the melted layer thicker than that of the others, adapting to strengthen the surface of material, and the power density of 1.07 × 107 W/cm2 of discharge pit on the polyethylene-covered surface is highest to form the deepest discharge pit among them, adapting to remove the material. [ABSTRACT FROM AUTHOR]

Electrocatalytic CO2 reduction (ECR) powered by renewable electricity has attracted of wide attention because of its advantages to produce high‐value‐added chemicals and fuels. Additionally, ECR played a crucial role in addressing the challenge of excessive fossil fuel consumption caused by global warming. Herein, a unique armor structure with Ni nanoparticles coated by a carbon shell containing Ni─N─C (Ni─NP@Ni─SA) for industrial ECR to CO in pH‐universal electrolytes is designed. Ni─NP@Ni─SA catalyst exhibits ≈100% CO Faradaic efficiency, and CO partial current density can reach 500, 361, and 615 mA cm−2 in strong alkaline (pH 14), neutral (pH 7.2) and strong acidic (pH 1) electrolytes, respectively. Moreover, Ni─NP@Ni─SA can drive the rechargeable Zn‐CO2 battery with a high power density of 3.45 mW cm−2, and outstanding stability over 36 h. The structural characterizations and theoretical calculation together present that the electron penetration effect of Ni─NP@Ni─SA can strengthen the electronic enrichment state of Ni single atom, which facilitates the reaction kinetics of ECR by decreasing the formation energy barrier of key intermediate *COOH. This work pioneers a new design strategy to enhance the activity of single‐atom catalysts and seek high‐efficiency electrocatalysts for ECR in pH‐universal electrolytes. [ABSTRACT FROM AUTHOR]

• ZnTi-LDH nanosheets were prepared for the oxidation of benzyl alcohol. • Benzyl alcohol would be chemisorbed on ZnTi-LDH forming surface coordination species. • Surface coordination species harvest visible light and induce the photocatalysis. • Oxygen vacancies would be induced in ZnTi-LDHs after the adsorption of BA. • Oxygen vacancies would benefit the oxidation of Benzyl alcohol. ZnTi-LDH nanosheets have been synthesized as photocatalysts for selective oxidation of benzyl alcohol (BA) to benzaldehyde (BAD) under visible light irradiation. Based on UV–vis DRS, in-situ FTIR and XPS results, it was revealed that BA would be efficiently chemisorbed and activated on ZnTi-LDH forming the surface coordination species, which contributed to harvesting visible light and induced the photocatalytic reaction. The ESR spectra suggested that oxygen vacancies would be produced in ZnTi-LDHs after the adsorption of BA molecules. More exposed surface OH groups would induce more oxygen vacancies, which would serve as the centers for capturing photoelectrons from the photoexcited surface coordination species and act as active sites for enhanced O 2 adsorption and activation, resulting outstanding photocatalytic activity. Finally, a possible mechanism was proposed to illustrate the photocatalytic process which mediated by surface coordination species formed by the interaction between ZnTi-LDH and BA. [ABSTRACT FROM AUTHOR]

Extreme heat events prolong the reproductive period and threaten soybean yield, whereas the specific stage at which individual fruits growth is delayed, and yield/yield components at the node, region, and plant levels under short-term heat stress in the reproductive stage are elusive. In this study, heat treatments (40/30 °C) were applied at 0–6 days (HT F0-6), 6–12 days (HT F6-12), 12–18 days (HT F12-18), and 0–12 days (HT F0-12) after the plant's first flower opened, and a control treatment (32/22 °C) was performed. The influences of heat stress on fruit development and yield/yield components at the node, region, and plant levels were investigated. As a result, the growth of individual fruits at nodes was delayed by HT F0-6 and HT F0-12 , which was primarily caused by the prolongation of flowering to pods with a length of 2 cm. Interestingly, there were no significant differences in yield between the control treatment and the various high-temperature stress treatments at the plant level. Further analysis of the regional yield of soybean showed that the yield in the bottom and top regions of plants played significant roles in compensating for yield loss in the middle region after HT F0-12. Moreover, the delayed growth of individual fruits in the middle region was negatively correlated with yield. Our results indicate that the prolongation of fruit development induced by HT F0-6 and HT F0-12 may adversely affect soybean yield. However, the spatial compensation of plants could help maintain soybean yield under various short-term high temperature stress treatments during the reproductive period, which should be considered when breeding for and selecting heat-tolerant varieties. [ABSTRACT FROM AUTHOR]

Coprophagy prevention (CP) affects the growth performance, hepatic lipid synthesis, and gut microbiota in rabbits. Supplementation with Clostridium butyricum (C. butyricum, Strain number: CCTCC M 2019962) has been found to improve growth performance in rabbits. However, it remains unknown whether C. butyricum can ameliorate the effects of CP on hepatic lipid synthesis and the underlying mechanisms are yet to be elucidated. Therefore, this study aimed to investigate the impact of CP on hepatic lipid synthesis and the underlying mechanism based on the gut–liver axis. The findings revealed that supplementation with C. butyricum could reverse CP-related growth performance, lipid accumulation, bile acid synthesis, and inflammation. Furthermore, C. butyricum exerted protective effects on the gut by preserving intestinal barrier integrity and modulating gut microbiota composition; these factors may represent potential mechanisms through which C. butyricum improves CP-related outcomes. Specifically, C. butyricum reshaped the microbiota by increasing butyric acid levels, thereby maintaining secondary bile acid (deoxycholic acid, chenodeoxycholic acid) balance and attenuating the inhibitory effects of the FXR/SHP pathway on lipid synthesis (SREBP1c/ApoA1). Moreover, the activation of butyrate/GPR43pathway by C. butyricum reduced damage to the intestinal barrier (ZO-1/Occludin/Claudin1) and restored the gut immune microenvironment in CP rabbits. In summary, supplementation with C. butyricum can alleviate the adverse effects of CP on growth performance and hepatic lipid synthesis by modulating the gut–liver axis. [ABSTRACT FROM AUTHOR]

Carbon dioxide (CO2) conversion is promising in alleviating the excessive CO2 level and simultaneously producing valuables. This work reports the preparation of carbon nanorods encapsulated bismuth oxides for the efficient CO2 electroconversion toward formate production. This resultant catalyst exhibits a small onset potential of −0.28 V vs. RHE and partial current density of over 200 mA cm−2 with a stable and high Faradaic efficiency of 93 % for formate generation in a flow cell configuration. Electrochemical results demonstrate the synergistic effect in the Bi2O3@C promotes the rapid and selective CO2 reduction in which the Bi2O3 is beneficial for improving the reaction kinetics and formate selectivity, while the carbon matrix would be helpful for enhancing the activity and current density of formate production. This work provides effective bismuth‐based MOF derivatives for efficient formate production and offers insights in promoting practical CO2 conversion technology. [ABSTRACT FROM AUTHOR]

Carbon dioxide (CO2) conversion is promising in alleviating the excessive CO2 level and simultaneously producing valuables. This work reports the preparation of carbon nanorods encapsulated bismuth oxides for the efficient CO2 electroconversion toward formate production. This resultant catalyst exhibits a small onset potential of −0.28 V vs. RHE and partial current density of over 200 mA cm−2 with a stable and high Faradaic efficiency of 93 % for formate generation in a flow cell configuration. Electrochemical results demonstrate the synergistic effect in the Bi2O3@C promotes the rapid and selective CO2 reduction in which the Bi2O3 is beneficial for improving the reaction kinetics and formate selectivity, while the carbon matrix would be helpful for enhancing the activity and current density of formate production. This work provides effective bismuth‐based MOF derivatives for efficient formate production and offers insights in promoting practical CO2 conversion technology. [ABSTRACT FROM AUTHOR]

A convenient method for the oxysulfenylation of alkenes using dimethyl sulfoxide/oxalyl chloride is described. Cycloalkenes give trans-adducts stereospecifically. The reactions of styrene are highly regioselective for Markovnikov adducts, whereas aliphatic alkenes lead to anti-Markovnikov adducts mainly. [ABSTRACT FROM AUTHOR]

Abstract The quality of dehydrated vegetables is affected by the degree to which they are returned to their original state during rehydration (restorability). At present, whether this mechanism occurs at the cell-wall or cell-membrane level is unclear. This paper reviews the important factors affecting the mechanism of dehydration–rehydration, focusing on the analysis of the composition and structure of the cell wall and cell membrane, and summarizes the related detection and analytical techniques that can be used to explore the mechanisms of dehydration–rehydration at the cell-wall and cell-membrane levels. The integrity and permeability of the cell membrane affect water transport during the dehydration–rehydration process. The cell wall and cell membrane are supporting materials for tissue morphology. The arabinan side chains of the primary structure and fibers are important for water retention. Water transport may be classified as symplastic and apoplastic. Cell membrane disruption occurs with symbiotic transport but increases the drying rate. An in-depth analysis of the dehydration–rehydration mechanism of vegetables will help develop and improve their processing methods and inspire new applications. [ABSTRACT FROM AUTHOR]

Nanosized spinel ferrites MFe2O4 (M = Mn, Co, Ni, Cu, Zn)-coated flaky FeSiAl alloy composites were synthesized successfully. Nano-ferrites preferentially grow into nanoplatelets due to induced or restricted growth on the flaky surface of FeSiAl. With annealing temperature increasing, the ferrites' nanosheets thicken gradually and then grow into irregular particles. The annealing temperature not only affects the nanosized morphology and coating but also the magnetic properties of flaky FeSiAl composites. The saturation magnetization of CuFe2O4- or NiFe2O4-coated FeSiAl is approximate 69 emu/g, where the value of MnFe2O4-, CoFe2O4- and ZnFe2O4-coated FeSiAl show a decreasing trend generally from 64 emu/g to 55.7 emu/g annealing at 800 °C, respectively. The saturation magnetization of flaky FeSiAl composites was improved with the increased annealing temperature, except for those coated with ZnFe2O4 and NiFe2O4. These results are useful for improving the comprehensive properties of ferrite-coated flaky FeSiAl alloy composites. [ABSTRACT FROM AUTHOR]

Background. Lymph node metastasis (LNM) is the main route of metastasis in lung adenocarcinoma (LA), and preoperative prediction of LNM in early LA is key for accurate medical treatment. We aimed to establish a preoperative prediction model of LNM of early LA through clinical data mining to reduce unnecessary lymph node dissection, reduce surgical injury, and shorten the operation time. Methods. We retrospectively collected imaging data and clinical features of 1121 patients with early LA who underwent video-assisted thoracic surgery at the First Hospital of China Medical University from 2004 to 2021. Logistic regression analysis was used to select variables and establish the preoperative diagnosis model using random forest classifier (RFC). The prediction results from the test set were used to evaluate the prediction performance of the model. Results. Combining the results of logistic analysis and practical clinical application experience, nine clinical features were included. In the random forest classifier model, when the number of nodes was three and the n -tree value is 500, we obtained the best prediction model (accuracy = 0.9769), with a positive prediction rate of 90% and a negative prediction rate of 98.69%. Conclusion. We established a preoperative prediction model for LNM of early LA using a machine learning random forest method combined with clinical and imaging features. More excellent predictors may be obtained by refining imaging features. [ABSTRACT FROM AUTHOR]

• Heterogeneous components are uniformly embedded into laser-induced graphene (LIG). • Shape-controllable MoS 2 /LIG electrodes are assembled into flexible in-plane MSCs. • Flexible planar MSCs are fabricated on various substrates to expand the application. • Flexible planar MoS 2 /LIG-MSCs exhibit high area specific capacitance. • MoS 2 /LIG-MSCs maintain excellent electrochemical performance at bending states. [Display omitted] As an essential miniature energy storage device, flexible in-plane micro-supercapacitors (MSCs) have the advantages of rapid charge and discharge, instantaneously high power output, long cycle stability and easy integration. However, the synthesis of electrode materials, the preparation of patterned microelectrodes and the subsequent modular integration are usually carried out independently, and the steps are very complicated. Accordingly, an effective and fast fabrication process involving laser direct writing technique is introduced to prepare shape-controllable MoS 2 nanoparticle-embedded laser-induced graphene (MoS 2 /LIG) patterned electrodes on various substrates for flexible planar MSCs. The embedding of MoS 2 nanoparticles can effectively improve the hydrophobic properties of MoS 2 /LIG hybrid electrodes, which is more conducive to the adsorption and desorption of aqueous electrolyte ions. Benefiting from the engineering of pseudocapacitive MoS 2 nanoparticles uniformly embedded in good conductive LIG with 3D porous structure, our flexible planar MoS 2 /LIG MSC demonstrates a superior areal capacitance of 35.3 mF cm–2, a high energy density of 4.91 mW h cm–2 at a power density of 0.18 mW cm–2, good cycle stability, outstanding mechanical flexibility, and prominent modular integration. The universal process route developed in this work can be used for controllable assembly of many similar flexible planar integrated MSCs, and may accelerate their potential application in flexible and wearable electronics. [ABSTRACT FROM AUTHOR]

[Display omitted] • Fe 2 O 3 - c and Fe 2 O 3 - h nanocrystals were prepared through the calcination of Fe-MOF. • Fe 2 O 3 - c nanocrystals have better DOMF performance than Fe 2 O 3 - h nanocrystals. • The phase engineering of Fe 2 O 3 affects CH 4 adsorption ability during DOMF process. The direct oxidation of methane (CH 4) under mild conditions is a highly desirable technology to achieve the low-carbon and atom-economic production of high-value-added C1 oxygenates. However, the difficult activation of the C H bond of CH 4 and the overoxidation of C1 oxygenates to carbon dioxide (CO 2) are still the major bottlenecks. Herein, we systematically investigate the phase engineering of Fe 2 O 3 in dependence on the performance of the direct oxidation of CH 4. The cubic phase of Fe 2 O 3 (Fe 2 O 3 - c) nanocrystals enables the direct oxidation of CH 4 to HCOOH (DOMF) under mild aqueous conditions, and the HCOOH yield and selectivity could reach 6.315 mmol g cat −1 h−1 and 89.4%, which are 69.3 and 1.34 times higher than those of the hexagonal phase of Fe 2 O 3 (Fe 2 O 3 - h) nanocrystals. Mechanism experiments indicate that Fe 2 O 3 - c nanocrystals can optimal CH 4 adsorption behavior, favoring to the occurrence of the DOMF. In addition, in situ DRIFTS demonstrates that the DOMF is the radical reaction process that the activation of C H bond is caused by the ·OH radical. Subsequently, the unstable CH 3 OOH and stable CH 3 OH intermediates undergo further oxidation to form HCOOH. This work offers the phase engineering strategy to enhance the catalytic performance and reveal the reaction mechanism for the direct oxidation of CH 4. [ABSTRACT FROM AUTHOR]

• C. butyricum can alleviate the coprophagy prevention induced intestine inflammation. • C. butyricum can reshape intestinal microflora and improve intestinal immune microenvironment. • C. butyricum inhibits apoptosis and promotes mucosal repair by inhibiting Flagellin-TLR5 signaling pathway. As bacteria synthesize nutrients primarily in the cecum, coprophagy is indispensable for supplying rabbits with essential nutrients. Recent research has demonstrated its pivotal role in maintaining intestinal microbiota homeostasis and immune regulation in rabbits, although the specific mechanism remains unknown. Here, we used coprophagy prevention (CP) to investigate the effects of coprophagy on the cecum homeostasis and microbiota in New Zealand white rabbits. Furthermore, whether supplementation of Clostridium butyricum (C. butyricum) may alleviate the cecum inflammation and apoptosis caused by CP was also explored. Four groups were randomly assigned: control (Con), sham-coprophagy prevention (SCP), coprophagy prevention (CP), and CP and C. butyricum addition (CPCB). Compared to Con and SCP, CP augmented cecum inflammation and apoptosis, as well as bacterial adhesion to the cecal epithelial mucosa, while decreasing the expression of tight junction proteins (ZO-1, occluding, and claudin-1). The relative abundance of short-chain fatty acids (SCFAs)-producing bacteria was significantly decreased in the CP group. Inversely, there was an increase in the Firmicutes/Bacteroidetes ratio and the relative abundance of Christensenellaceae_R-7_group. Additionally, CP increased the levels of Flagellin, IFN-γ, TNF-a, and IL-1β in cecum contents and promoted the expression of TLR5/MyD88/NF-κB pathway in cecum tissues. However, the CPCB group showed significant improvements in all parameters compared to the CP group. Dietary C. butyricum supplementation significantly increased the production of SCFAs, particularly butyric acid, triggering anti-inflammatory, tissue repairing, and barrier-protective responses. Notably, CPCB effectively mitigated CP-induced apoptosis and inflammation. In summary, CP disrupts the cecum epithelial barrier and induces inflammation in New Zealand white rabbits, but these effects can be alleviated by C. butyricum supplementation. This process appears to be largely associated with the TLR5/MyD88/NF-κB signaling pathway. [ABSTRACT FROM AUTHOR]

A graphene/AlGaN deep-ultraviolet (UV) photodetector is presented with ultrahigh responsivity of 3.4 × 105 A/W at 261 nm incident wavelength and 149 pW light power. A gain mechanism based on electron trapping at the potential well is proposed to be responsible for the high responsivity. To optimize the trade-off between responsivity and response speed, a back-gate electrode is designed at the AlGaN/GaN two-dimensional electron gas (2DEG) area which eliminates the persistent photocurrent effect and shortens the recovery time from several hours to milliseconds. The 2DEG gate is proposed as an alternative way to apply the back gate electrode on AlGaN based devices on insulating substrates. This work sheds light on a possible way for weak deep-UV light detection. [ABSTRACT FROM AUTHOR]

Magnetite (MFe 2 O 4 , M = Mn, Zn, Ni, Co) nanosheet coated flaky FeSiAl alloy composite powder have been successfully synthesized. The morphology, composition, crystal structures, magnetism and electromagnetic performance of composite powder were studied systematically. Spinel ferrite nanosheet were prepared on the surface of flaky FeSiAl by hydroxide deposition decomposition. This structure will benefit the microwave multiple reflection loss. The saturation magnetization of the composite powder decreased with ferrite coating. The ZnFe 2 O 4 coated composite exhibited higher saturation magnetization while the CoFe 2 O 4 coated composite had the highest coercivity. Owing to the oxide coating, the complex permittivity and dielectric loss of the composite powder were evidently increased while the magnetic loss significantly decreased. Magnetic loss was dominant under 13 GHz and dielectric loss contributed equally as magnetic loss at higher frequency. Therefore, the composite powder attenuate the electromagnetic waves much more efficiently at higher frequency. Our results provide a reference to understand the effect of ferrite nanosheet coating on the magnetism and design the microwave absorption of composite powder materials. [Display omitted] • Magnetite (MFe 2 O 4 , M = Mn, Zn, Ni, Co) nanosheet coated flaky FeSiAl alloy composites have been successfully synthesized. • The flaky FeSiAl@ZnFe 2 O 4 composite exhibited higher saturation magnetization where FeSiAl@CoFe 2 O 4 composite has the highest coercivity. • High frequency attenuation capability is enhanced by loading ferrite. [ABSTRACT FROM AUTHOR]

Natural anthocyanins are safer and nutritious as compared to synthetic pigments; however, their stability is poor. They can produce spontaneous copigmentation with organic acids, leading to the improvement of colour stability, albeit slowly. Box–Behnken experimental design was used to elucidate the mechanism of copigmentation between Vitis amurensis Rupr anthocyanins (0.1 mg/mL) and organic acids (0.87 mg/mL, ferulic acid: d -gluconic acid:caffeic acid:vanillic acid = 1.5:2.5:2.5:0.5, w/w/w/w) promoted by high hydrostatic pressure (HHP; 300 MPa, 2 min). The copigmentation effect and antioxidant activity of anthocyanins were also evaluated. The structure of anthocyanins was analysed using ultraviolet–visible spectroscopy, Fourier-transform infrared spectroscopy, high-performance liquid chromatography, and mass spectrometry. The results of HHP copigmentation showed that the following anthocyanins were newly formed—delphinidin-3- O -catechol, petunidin-3- O -catechol, delphinidin-4-vinyl-catechol, petunidin-3- O -guaiacol, malvidin-4-vinyl-guaiacol, cyanidin-3- O -(6″- O -caffeoyl)-glucoside, peonidin-3- O -(6″- O -caffeoyl)-glucoside, delphinidin-3- O -(6″- O -caffeoyl)-glucoside, malvidin-3- O -glucoside-4-vinyl-guaiacol, and malvidin-3- O -(6″- O -feruloyl)-glucoside—owing to appropriate modifications that increased the copigmentation rate (R = 42.12%), photo-thermal stability (R > 45%), and potential antioxidant activities expressed in vivo ( p  < 0.01 vs. Model Group). [ABSTRACT FROM AUTHOR]

In the present work, a coupled three-dimensional numerical model of fluid flow, heat transfer, and inclusion motion during the solidification of molten steel in slab continuous casting mold has been developed. Based on the model, this paper has studied the inclusion capture during the process. The influence of the primary dendrite arm spacing on inclusion capture has been considered. The inclusion distributions, total masses, and average diameters at different depth from the slab surface have been given out in the present paper. The simulation results revealed the inclusion concentration existed in the solidification process, and the inclusion capturing area varies with the depth from the slab surface. [ABSTRACT FROM AUTHOR]

[Display omitted] • The main source of wine aroma and the formation mechanism are discussed. • The main influencing factors of aroma formation are analyzed. • The production and control of aroma in the winemaking process are concluded. As an important sensory indicator, aroma affects the quality of wine and consumer preference. In this review, the following aspects are comprehensively analyzed: (1) Varietal aroma, fermentation aroma and aging aroma formation mechanism include metabolic pathways etc. (2) The main factors affecting the aroma formation include environment, raw and auxiliary materials and brewing process. (3) In the process of winemaking, environmental factors can be controlled by regulating deficit irrigation, leaf removal and reflective mulch; the quality of raw and auxiliary materials can also be controlled through the varieties breeding of grape and yeast; flash evaporation, ultrasonic aging and other advanced brewing technologies can be used to synergistically control aroma formation. In the future, the wine brewing process can be controlled from the following aspects to ensure the precise regulation of aroma. This research will provide a theoretical basis for the improvement of wine production technology and quality. [ABSTRACT FROM AUTHOR]