Search

Core-shell GaInN/GaN multiquantum shell (MQS) nanowires (NWs) are gaining great attention for high-efficiency micro-light-emitting diodes (micro-LEDs) owing to the minimized etching region on their sidewall, nonpolar or semipolar emission planes, and ultralow density of dislocations. In this study, we evaluated the changes in NW morphologies and the corresponding device properties induced by GaInN/GaN superlattice (SL) structures. The cathodoluminescence intensities of the samples with 20 and 40 pairs of SLs were about 2.2 and 3.4 times higher, respectively, than that of the sample without SLs. The high-resolution scanning transmission electron microscopy (STEM) inspection confirmed that the high growth temperature of SLs prevented growth in the semipolar plane region close to the n-GaN core. A similar phenomenon was also observed for the GaN quantum barriers of the semipolar MQS region under a high growth temperature of 810 °C. This phenomenon was ascribed to the passivation of the semipolar plane surface by hydrogen atoms and the high probability of decomposition through NH

GaInN/GaN multi-quantum-shell (MQS) nanowires (NWs) are gaining increasing attention as promising materials for developing highly efficient long-wavelength micro-light emitting diodes (LEDs). To improve the emission properties in GaInN/GaN MQS NWs, it is necessary to suppress the emission from the (0001) c-plane MQS at the apex region, which featured with low crystalline quality. In this study, we investigated the enhancement of optical properties and the realization of micro-LEDs by confirming the effect of the (0001) plane region. A 7.9-fold enhancement of the electroluminescence (EL) intensity was demonstrated by removal the (0001) plane region via inductively coupled plasma (ICP) dry etching, owing to the promoted current injection into the (1–101) semi-polar and (10–10) non-polar sidewall area. To investigate the effect of the emission area on the samples with and without truncated (0001) plane region, devices with three different mesa areas (50 × 50, 100 × 100, and 100 × 200 μm2) were fabricated. An increased EL intensity with the reduced mesa areas was observed in the samples without dry etching of the (0001)-plane area, because more current can be injected into the sidewall region with higher crystalline quality and luminous efficiency than the (0001)-plane MQS. Under the same injection current density, the truncated samples’ light output was increased for more than ten times as compared to the samples without (0001)-plane etching. Therefore, it confirms the possibility of realizing highly efficient GaInN/GaN MQS NWs LEDs by eliminating the (0001) plane MQS region. A precise etching and surface passivation of the apex region is expected to further reduce the reverse leakage current and improve the performance in NW-LEDs.

The morphology and crystalline quality of p-GaN shells on coaxial GaInN/GaN multiple quantum shell (MQS) nanowires (NWs) were investigated using metal-organic chemical vapor deposition. By varying the trimethylgallium (TMG) flow rate, Mg doping, and growth temperature, it was verified that the TMG supply and growth temperature were the dominant parameters in the control of the p-GaN shape on NWs. Specifically, a sufficiently high TMG supply enabled the formation of a pyramid-shaped NW structure with a uniform p-GaN shell. The ratio of the growth rate between the c- and m-planes on the NWs was calculated to be approximately 0.4545. High-angle annular dark-field scanning transmission electron microscopy characterization confirmed that no clear extended defects were present in the n-GaN core and MQS/p-GaN shells on the sidewall. Regarding the p-GaN shell above the c-plane MQS region, only a few screw dislocations and Frank-type partial dislocations appeared at the interface between the serpentine c-plane MQS and the p-GaN shell near the tips. This suggested that the crystalline quality of the MQS structure can trigger the formation of screw dislocations and Frank-type partial dislocations during the p-GaN growth. The growth mechanism of the p-GaN shell on NWs was also discussed. To inspect the electronic properties, a prototype of a micro light-emitting diode (LED) with a chip size of 50 × 50 μm2 was demonstrated in the NWs with optimal growth. By correlating the light output curve with the electroluminescence spectra, three different emission peaks (450, 470, and 510 nm) were assignable to the emission from the m-, r-, and c-planes, respectively.

Localized surface plasmons exhibit promising capabilities in optoelectronic devices. In most cases, the metal nanoparticle arrays are located on interfaces or inside optical cavities. Fano interferences have been observed and explained via the interference between the waves generated by the localized surface plasmon and dielectric interfaces. Conventionally, these Fano interferences are modeled using the modified Fresnel equation. However, certain issues persist in the fundamental physics or in the numerical calculation process. Here, we adopt the equivalent medium theory (Maxwell-Garnett theory, MGT) to calculate and elucidate Fano interferences in different structures, in the region comprising nanoparticle arrays and dielectrics equivalent to a homogeneous layer of media via the mean field theory. Using this method, the Fano interference can be modeled by mixing different materials, i.e., metals and dielectrics in these cases. Furthermore, a multiple-layered equivalent medium theory is proposed to significantly improve the scalability of this simplified numerical method. In other words, this method can be easily extended to nanoparticles with different shapes, sizes, and materials; in addition, it exhibits robust practicability. Compared with the modified Fresnel equation and finite-difference time-domain methods, this MGT-based method can effectively minimize the calculation process, which is beneficial to the prospective application of plasmon photonics.

Improving current injection into r- and m-planes of nanowires (NWs) is essential to realizing efficient GaInN/GaN multiple quantum shell (MQS) NW-based light-emitting diodes (LEDs). Here, we present the effects of different p-GaN shell growth conditions on the emission characteristics of MQS NW-LEDs. Firstly, a comparison between cathodoluminescence (CL) and electroluminescence (EL) spectra indicates that the emission in NW-LEDs originates from the top region of the NWs. By growing thick p-GaN shells, the variable emission peak at around 600 nm and degradation of the light output of the NW-LEDs are elaborated, which is attributable to the localization of current in the c-plane region with various In-rich clusters and deep-level defects. Utilizing a high growth rate of p-GaN shell, an increased r-plane and a reduced c-plane region promote the deposition of indium tin oxide layer over the entire NW. Therefore, the current is effectively injected into both the r- and m-planes of the NW structures. Consequently, the light output and EL peak intensity of the NW-LEDs are enhanced by factors of 4.3 and 13.8, respectively, under an injection current of 100 mA. Furthermore, scanning transmission electron microscope images demonstrate the suppression of dislocations, triangular defects, and stacking faults at the apex of the p-GaN shell with a high growth rate. Therefore, localization of current injection in nonradiative recombination centers near the c-plane was also inhibited. Our results emphasize the possibility of realizing high efficacy in NW-LEDs via optimal p-GaN shell growth conditions, which is quite promising for application in the long-wavelength region.

High crystalline quality coaxial GaInN/GaN multiple quantum shells (MQSs) grown on dislocation-free nanowires are highly in demand for efficient white-/micro-light-emitting diodes (LEDs). Here, we propose an effective approach to improve the MQS quality during the selective growth by metal-organic chemical vapor deposition. By increasing the growth temperature of GaN barriers, the cathodoluminescent intensity yielded enhancements of 0.7 and 3.9 times in the samples with GaN and AlGaN spacers, respectively. Using an AlGaN spacer before increasing the barrier temperature, the decomposition of GaInN quantum wells was suppressed on all planes, resulting in a high internal quantum efficiency up to 69%. As revealed by scanning transmission electron microscopy (STEM) characterization, the high barrier growth temperature allowed to achieve a clear interface between GaInN quantum wells and GaN quantum barriers on the c-, r-, and m-planes of the nanowires. Moreover, the correlation between the In incorporation and structure features in MQS was quantitatively assessed based on the STEM energy-dispersive X-ray spectroscopy mapping and line-scan profiles of In and Al fractions. Ultimately, it was demonstrated that the unintentional In incorporation in GaN barriers was induced by the evaporation of predeposited In-rich particles during low-temperature growth of GaInN wells. Such residual In contamination was sufficiently inhibited by inserting low Al fraction (∼6%) AlGaN spacers after each GaInN well. During the growth of AlGaN spacers, AlN polycrystalline particles were deposited on the surrounding dummy substrate, which suppressed the evaporation of the predeposited In-rich particles. Thus, the presence of AlGaN spacers certainly improved the uniformity of In fraction through five GaInN quantum wells and reduced the diffusion of point defects from n-core to MQS active structures. The superior coaxial GaInN/GaN MQS structures with the AlGaN spacer are supposed to improve the emission efficiency in white-/micro-LEDs.

The dependence of optical properties on impurity concentrations and excitation power was explored. In particular, it was found that the peak shift of photoluminescence (PL) is proportional to the boron concentration. This might be due to donor–acceptor pair (DAP) recombination via double deep acceptor levels (D-centers), where the occupancy of the D*-center increased with the B concentration, and the recombination via the D*-center for longer wavelengths became dominant. Moreover, the relative constants B and C were calculated by BC model fitting from the internal quantum efficiency (IQE) curve as a function of excitation power. The theoretical extrapolation based on BC model predicted that high impurity concentrations are sufficient to suppress the droop phenomenon of efficiency induced by the increased excitation power.

In this study, the improvement of reverse leakage current characteristics with a sputtered (SP) -AlN buffer layer in GaInN-based green light-emitting diodes (LEDs) has been presented for the first time. To understand the origin of the improvement, a detailed review and careful analysis of reverse leakage current characteristics were performed. The review and analysis identified that the improvement was primarily caused by the suppression of variable-range-hopping process obtained by replacing conventional low-temperature GaN buffer. Verification that threading dislocations and V- defects can enhance the variable-range-hopping process has been received. We believe that this study will contribute to the realization of green LEDs with advantages of high reliability, a long lifetime, and electrical robustness.

We investigate single-cycle terahertz (THz) field-induced nonlinear absorption in doped silicon carbide. We find that the nonlinear response is ultrafast, and we observe up to 20% reduction of transmission of single THz pulses at peak field strengths of 280 kV/cm. We model the field and temperature dependence of the nonlinear response by a finite-difference time-domain simulation that incorporates the temporally nonlocal nonlinear conductivity of the silicon carbide. Nonlinear two-dimensional THz spectroscopy reveals that the nonlinear absorption has an ultrafast subpicosecond recovery time, with contributions from both sum-frequency generation and four-wave mixing, in the form of a photon-echo signal. The ultrafast nonlinearity with its equally fast recovery time makes silicon carbide an interesting candidate material for extremely fast nonlinear THz modulators.

The superior crystalline quality of coaxial GaInN/GaN multiple-quantum shell (MQS) nanowires (NWs) was demonstrated by employing an AlGaN undershell during metal-organic chemical vapor deposition. Scanning transmission electron microscopy (STEM) results reveal that the NW structure consists of distinct GaInN/GaN regions on different positions of the NWs and the cores were dislocation-free. High-resolution atomic contrast STEM images verified the importance of AlGaN undershells in trapping the point defects diffused from n-core to MQSs (m-planes), as well as the improvement of the grown crystal quality on the apex region (c-planes). Time-integrated and time-resolved photoluminescence (PL) measurements were performed to clarify the mechanism of the emission within the coaxial GaInN/GaN MQS NWs. The improved internal quantum efficiency in the NW sample was attributed to the unique AlGaN undershell, which was able to suppress the point defects diffusion and reduce the dislocation densities on c-planes. Carrier lifetimes of 2.19 ns and 8.44 ns were derived from time-resolved PL decay curves for NW samples without and with the AlGaN undershell, respectively. Hence, the use of an AlGaN undershell exhibits promising improvement of optical properties for NW-based white and micro light-emitting diodes.

A comprehensive study of surface passivation effect on porous fluorescent silicon carbide (SiC) was carried out to elucidate the luminescence properties by temperature dependent photoluminescence (PL) measurement. The porous structures were prepared using an anodic oxidation etching method and passivated by atomic layer deposited (ALD) Al2O3 films. An impressive enhancement of PL intensity was observed in porous SiC with ALD Al2O3, especially at low temperatures. At temperatures below 150 K, two prominent PL emission peaks located at 517 nm and 650 nm were observed. The broad emission peak at 517 nm was attributed to originate from the surface states in the porous structures, which was supported by X-ray photoelectron spectra characterization. The emission peak at 650 nm is due to donor-acceptor-pairs (DAP) recombination via nitrogen donors and boron-related double D-centers in fluorescent SiC substrates. The results of the present work suggest that the ALD Al2O3 films can effectively suppress the non-radiative recombination for the porous structures on fluorescent SiC. In addition, we provide the evidence based on the low-temperature time-resolved PL that the mechanism behind the PL emission in porous structures is mainly related to the transitions via surface states.

Here, we systematically investigated the growth conditions of an n-GaN cap layer for nanowire-based light emitters with a tunnel junction. Selective-area growth of multiple quantum shell (MQS)/nanowire core-shell structures on a patterned n-GaN/sapphire substrate was performed by metal-organic vapor phase epitaxy, followed by the growth of a p-GaN, an n++/ p++-GaN tunnel junction, and an n-GaN cap layer. Specifically, two-step growth of the n-GaN cap layer was carried out under various growth conditions to determine the optimal conditions for a flat n-GaN cap layer. Scanning transmission electron microscopy characterization revealed that n++-GaN can be uniformly grown on the m-plane sidewall of MQS nanowires. A clear tunnel junction, involving 10-nm-thick p++-GaN and 3-nm-thick n++-GaN, was confirmed on the nonpolar m-planes of the nanowires. The Mg doping concentration and distribution profile of the p++-GaN shell were inspected using three-dimensional atom probe tomography. Afterward, the reconstructed isoconcentration mapping was applied to identify Mg-rich clusters. The density and average size of the Mg clusters were estimated to be approximately 4.3 × 1017 cm-3 and 5 nm, respectively. Excluding the Mg atoms contained in the clusters, the remaining Mg doping concentration in the p++-GaN region was calculated to be 1.1 × 1020 cm-3. Despite the lack of effective activation, a reasonably low operating voltage and distinct light emissions were preliminarily observed in MQS nanowire-based LEDs under the optimal n-GaN cap growth conditions. In the fabricated MQS-nanowire devices, carriers were injected into both the r-plane and m-plane of the nanowires without a clear quantum confinement Stark effect.

Multi-color emission from coaxial GaInN/GaN multiple-quantum-shell (MQS) nanowire-based light-emitting diodes (LEDs) was identified. In this study, MQS nanowire samples for LED processes were selectively grown on patterned commercial GaN/sapphire substrates using metal–organic chemical vapor deposition. Three electroluminescence (EL) emission peaks (440, 540, and 630 nm) were observed, which were primarily attributed to the nonpolar m-planes, semipolar r-planes, and the polar c-plane tips of nanowire arrays. A modified epitaxial growth sequence with improved crystalline quality for MQSs was used to effectively narrow the EL emission peaks. Specifically, nanowire-based LEDs manifested a clear redshift from 430 nm to 520 nm upon insertion of AlGaN spacers after the growth of each GaInN quantum well. This demonstrates the feasibility of lengthening the EL emission wavelength since an AlGaN spacer can suppress In decomposition of the GaInN quantum wells during ramping up the growth temperature for GaN barriers. EL spectra showed stable emission peaks as a function of the injection current, verifying the critical feature of the non-polarization of GaN/GaInN MQSs on nanowires. In addition, by comparing EL and photoluminescence spectra, the yellow-red emission linked to the In-fluctuation and point defects in the c-plane MQS was verified by varying the activation annealing time and lowering the growth temperature of the GaInN quantum wells. Therefore, optimization of MQS nanowire growth with a high quality of c-planes is considered critical for improving the luminous efficiency of nanowire-based micro-LEDs/white LEDs.

Coaxial GaInN/GaN multiple-quantum-shells (MQSs) nanowires (NWs) were grown on an n-type GaN/sapphire template employing selective growth by metal-organic chemical vapour deposition (MOCVD). To improve the cathodoluminescence (CL) emission intensity, an AlGaN shell was grown underneath the MQS active structures. By controlling the growth temperature and duration, an impressive and up to 11-fold enhancement of CL intensity is achieved at the top area of the GaInN/GaN MQS NWs. The spatial distribution of Al composition in the AlGaN undershell was assessed as a function of position along the NW and analysed by energy-dispersive X-ray measurement and CL characterisation. By introducing an AlGaN shell underneath GaInN/GaN MQS, the diffusion of point defects from the n-core to MQS is effectively suppressed because of the lower formation energy of vacancies-complexes in AlGaN in comparison to GaN. Moreover, the spatial distribution of Al and In was attributed to the insufficient delivery of gas precursors to the bottom of the NWs and the anisotropy diffusion on the nonpolar m-planes. This investigation can shed light on the effect of the AlGaN undershell on improving the emission efficiency of NW-based white and micro-light-emitting diodes (LEDs).

GaInN/GaN multiple quantum shells (MQS) nanowires and p-GaN shells were embedded with n-GaN layers through tunnel junction (TJ) shells using metalorganic chemical vapor deposition (MOCVD) method. The MQS nanowires were selectively grown on n-GaN/sapphire or GaN substrates. The fabrication process of laser structures with different resonators of 600500, 750, 1000 μm, and cavity widths of 7, 12, and 17 μm were investigated with insulating layer on the sidewalls of the ridge. The structures of the fabricated devices were characterized by scanning electron microscope (SEM) and current-voltage-light output characteristics were evaluated. Two different methods for mirror formation, etching and cleavage, were developed for the laser devices. During the investigation, a superior mirror formation suffered from the difference in etching rate between GaInN and GaN, generating concaves in the MQS region. Bluegreen light emission was observed from the entire ridge surface of the MQS index-guided laser structures. A maximum current density of emission at 17.9 kA/cm2 has been confirmed in the devices. The electroluminescence and cathodoluminescence measurements demonstrated that the r-plane and c-plane at the top of the MQS are dominant at low current densities, and the m-plane emission becomes stronger as the current density increases.

A tunnel junction and a n-GaN cap layer grown on the multi-quantum shells (MQS) /nanowires are introduced to decrease the resistivity and optical loss. The selective-area growth of the MQS/nanowire core-shell structures on the template was performed by metalorganic vapour phase epitaxy (MOVPE). Further, the MQS structure was covered with the tunnel junction and the n-GaN cap layer. Here, the growth conditions of the n-GaN cap layer were systemically investigated. The effect of p-GaN shape on the morphology of grown n-GaN cap layer was also assessed.

As a potential material for white light source, high luminous efficiency of fluorescent SiC requires a concentration of higher than 1.0×1019 cm-3 for both the donor (Nd) and acceptor (Na) and a film thickness of about 120 μm. In this study, we focus on the epitaxial growth of fluorescent 4H-SiC by closed sublimation growth in terms of different growth temperatures to increase the doping concentration of boron and nitrogen. In addition, the effect of growth pressure on the surface morphology was investigated. The photoluminescence (PL) intensity of the sample grown at 1900 °C is higher than that grown at 1800 °C. This result indicates that a higher temperature of 1900 °C can increase the boron (B) and nitrogen (N) doping concentration. However, it was confirmed that the surface of the sample grown at 1900 °C was rough. The surface morphology was significantly improved with an increased pressure to 9000 Pa. Meanwhile, the growth time was extended to increase the film thickness, and the amount of BN, which is the doping source of B acceptor, was increased accordingly. As a result, strong PL emission intensity with high internal quantum efficiency (IQE) was successfully demonstrated in 4H-SiC sample, which is comparable to that in fluorescent 6H-SiC.

The selective-monolithic growth of coaxial GaInN/GaN NWs was investigated by changing the TEG flow rate, barrier and well growth temperature during MQS growth. In incorporation increased with a higher TEG flow rate. However, In-rich flakes were formed the NWs resulting in the deterioration of crystal quality. Using a higher growth temperature of quantum barriers, abnormal growth at the top of NWs was eliminated. As a result, the CL emission intensity was enhanced. Furthermore, the occurrence of In desorption was suppressed by decreasing the growth temperature of quantum wells. Therefore, these results are promising for NW-based white LEDs.

This study investigated the fabrication of porous fluorescent SiC using a constant voltage-controlled anodic oxidation process. The application of a high, constant voltage resulted in a spatial distinction between the porous structures formed inside the fluorescent SiC substrates, due to the different etching rates at the terrace and the large step bunches. Large, dendritic porous structures were formed as the etching process continued and the porous layer thickened. Under the conditions of low hydrofluoric acid (HF) concentration, the uniformity of the dendritic porous structures through the entire porous layer was considerably improved compared with the conditions of high HF concentration. The resulting large uniform structure offered a sizable surface area, and promoted the penetration of atomic layer-deposited (ALD) Al2O3 films (ALD&ndash, Al2O3). The emission intensity in the porous fluorescent SiC was confirmed via photoluminescence (PL) measurements to be significantly improved by a factor of 128 after ALD passivation. With surface passivation, there was a clear blueshift in the emission wavelength, owing to the effective suppression of the non-radiative recombination rate in the porous structures. Furthermore, the spatial uniformity of emitted light was examined via PL mapping using three different excitation lasers, which resulted in the observation of uniform and distinctive emissions in the fluorescent SiC bulk and porous areas.

We investigated the effects of different growth facets of 6H-SiC and different voltage waveforms on the porous structure and luminescence properties. The structure formed on the surface after anodic etching significantly changed because of the difference in the growth plane, whereas dendritic and columnar pores were observed inside the Si- and C-face samples. These large porous structures were shown to promote the penetration depth of the atomic-layer-deposited Al2O3 films, and a recorded passivation depth of 30 μm layer was confirmed in C-face porous SiC. From the results using a fluorescence microscope and photoluminescence spectra measurement, it was concluded that the pulsed-voltage etching was preferable for fabricating uniform porous structures compared with the constant-voltage etching. However, the enhancement of the luminescence intensity needs to be further improved to realize high luminescent efficiency in porous fluorescent SiC.

In this study, the growth mechanisms of n-type gallium nitride (GaN) cap layers for embedding nanowire-based multi-quantum-shell (NW-MQS) with a tunnel junction were investigated using the metal–organic vapor-phase epitaxy method. Herein, instead of a p-type GaN layer, n-type GaN cap layers were applied as a contact layer to the anode electrode via a tunnel junction. NW-MQSs were prepared in a rectangular grid arrangement aligning with the m- and a-axis of GaN. The growth mode of the cap layers was controlled in three stages using different growth pressures and temperatures. The first cap layer was a faceted growth mode primarily comprising the r-plane, the second was a lateral growth mode that expanded the area of the c-plane, and the third was an acceleration of lateral growth. Finally, cap layers with a flat surface were realized. Void formation in the cap layers occurred only between the NW-MQSs along the m-axis of GaN. This observation can be attributed to the difference in the coalescence of the cap layers in the a- and m-axis directions. We believe that the NW-MQS structure with the cap layer that was optimized in this study can be used as a highly efficient optical device.

This study aimed to investigate and analyze the impurity doping characteristics in tunnel junctions (TJs) grown on core–shell structures, comprising GaInN/GaN multiple-quantum-shells (MQSs) and GaN nanowires. To this end, the impurity, structural, and electrical properties of the samples were characterized by scanning electron microscopy, scanning transmission electron microscopy, atom probe tomography (APT), nanoscale secondary ion mass spectrometry (NanoSIMS), and electroluminescence of the device which was fabricated for a prototype laser device to demonstrate an electrical operation of the MQSs layer. From the experimental results of NanoSIMS and APT, we demonstrated that the Mg-related problems in the TJ, such as the diffusion to the n++-GaN layer from the p+-GaN layer and formation of clusters in p+-GaN, are critical. Consequently, they cause a high operating voltage and dot-like spot emission of the light-emitting device. Based on the analysis, we suggested remedies and strategies to further improve the TJs that work well.

The minimization of electronics makes heat dissipation of related devices an increasing challenge. When the size of materials is smaller than the phonon mean free paths, phonons transport without internal scatterings and laws of diffusive thermal conduction fail, resulting in significant reduction in the effective thermal conductivity. This work reports, for the first time, the temperature dependent thermal conductivity of doped epitaxial 6H-SiC and monocrystalline porous 6H-SiC below room temperature probed by time-domain thermoreflectance. Strong quasi-ballistic thermal transport was observed in these samples, especially at low temperatures. Doping and structural boundaries were applied to tune the quasi-ballistic thermal transport since dopants selectively scatter high-frequency phonons while boundaries scatter phonons with long mean free paths. Exceptionally strong phonon scattering by boron dopants are observed, compared to nitrogen dopants. Furthermore, orders of magnitude reduction in the measured thermal conductivity was observed at low temperatures for the porous 6H-SiC compared to the epitaxial 6H-SiC. Finally, first principles calculations and a simple Callaway model are built to understand the measured thermal conductivities. Our work sheds light on the fundamental understanding of thermal conduction in technologically-important wide bandgap semiconductors such as 6H-SiC and will impact applications such as thermal management of 6H-SiC-related electronics and devices.

In this study, we discuss the influence of SiH4 flow rates on the structural and optical properties of GaN nanowires (NWs) with multiple-quantum-shells (MQSs). To this end, we prepared two n-GaN core NW samples with different SiH4 flow rates. Subsequently, MQS active layers of the same structure were grown on each n-GaN core NW under identical growth conditions. The samples were characterized by scanning electron microscopy, scanning transmission electron microscopy, energy-dispersive X-ray, and cathodoluminescence (CL) mapping. From the experimental results, we ascertained that a Si-rich layer was created between the sidewall of the NWs and MQSs, in which the number of Si atoms was mainly determined by the SiH4 flow rate. These Si atoms diffused into the MQSs during the growth, and significantly impacted the structural and optical properties, such as the shape and crystalline quality of the MQSs and NWs, and the CL intensity of the MQSs. On the basis of experimental results, we conclude that the SiH4 flow rate during the NW growth plays a critical role in the performance of an MQS-based optoelectronic semiconductor device.

We have demonstrated non-polar GaN power diodes (Schottky barrier diode and p–n junction diode) on foreign substrates featuring the true-lateral p–n and metal–semiconductor junctions. The diodes were fabricated on GaN islands laterally overgrown on the mask-patterned sapphire and Si substrates by metalorganic vapor phase epitaxy. The anode and cathode were formed on the opposed a-plane sidewalls of the island, making the device architecture essentially like the 90° rotation of the desired true-vertical power diodes. The ideality factor of the Schottky barrier diode remained 1.0 (from 1.00 to 1.05) over 7 decades in current. Specifically, a high critical electric field of 3.3 MV/cm was demonstrated on the p–n junction diode with avalanche capability. These performances reveal a strong potential of non-polar GaN with the true-lateral junctions for high power applications.

AbstarctWe report for the first time a NUV light to white light conversion in a N-B co-doped 6H-SiC (fluorescent SiC) layer containing a hybrid structure. The surface of fluorescent SiC sample contains porous structures fabricated by anodic oxidation method. After passivation by 20 nm thick Al2O3, the photoluminescence intensity from the porous layer was significant enhanced by a factor of more than 12. Using a porous layer of moderate thickness (~10 µm), high-quality white light emission was realized by combining the independent emissions of blue-green emission from the porous layer and yellow emission from the bulk fluorescent SiC layer. A high color rendering index of 81.1 has been achieved. Photoluminescence spectra in porous layers fabricated in both commercial n-type and lab grown N-B co-doped 6H-SiC show two emission peaks centered approximately at 460 nm and 530 nm. Such blue-green emission phenomenon can be attributed to neutral oxygen vacancies and interface C-related surface defects generated dring anodic oxidation process. Porous fluorescent SiC can offer a great flexibility in color rendering by changing the thickness of porous layer and bulk fluorescent layer. Such a novel approach opens a new perspective for the development of high performance and rare-earth element free white light emitting materials.

An n-GaN nanowire and a GaInN/GaN multi-quantum shell (MQS) were uniformly grown by the continuous flow mode MOVPE with the optimal growth condition. Although the extended defect-free crystal was successfully grown, the MQS may contain point defects acting as the nonradiative recombination centers. The AlGaN underlying shell was found to be effective point defect trap to improve the optical property of the MQS.

Tunable emission wavelengths from 415 nm to 600 nm were demonstrated in coaxial GaInN/GaN multiple quantum shells (MQS) grown on three-dimensional nanostructures. Uniform aperture arrays with different diameters and pitches were patterned on GaN/sapphire substrates by nanoimprint and e-beam lithography. Thereafter, the coaxial GaInN/GaN MQS structures were selectively grown on the nanostructures using metalorganic chemical vapor deposition (MOCVD). To achieve long wavelength emissions, a detailed investigation in terms of height, filling factor, diameter of apertures, and pitch was performed for clarifying the In incorporation in nanostructures. Scanning transmission electron microscopy (STEM) features demonstrate that the diffusion of precursors on SiO2 mask area plays an important role in the coaxially growth of MQS structures on naonopyramids. A growth model based on the diffusion length and pitch was proposed to explain the experimental results. It was clarified that the probability of In incorporation was promoted in nanopyramids with a small pitch (less than 3 times of the diffusion length), wherein direct impinged adatoms on nanopyramids also diffused and participated in the growth on the neighbor. With a decrease in the intervals of aperture patterns, emission longer than 600 nm can be achieved for white and micro light-emitting diodes.

In this study, we attempt to identify the presence of surface defects (SDs) at an n-type GaN surface after high-temperature growth and gain insight into their intrinsic features. To this end, first, we carefully investigate n-type GaN samples with different surface etching depths. Low-temperature photoluminescence (PL) spectra reveal that SDs are most likely nitrogen vacancies (VN) and/or VN-related point defects intensively distributed within ∼100 nm from the n-type GaN surface after a high-temperature growth. We investigate the effect of SDs on the internal quantum efficiency (IQE) of green light-emitting diodes (LEDs) by preparing GaInN-based green LEDs employing a surface-etched n-type GaN, which exhibits a prominent enhancement of the PL efficiency with an increase in the etching depth. This effect is attributable to the reduced non-radiative recombination centers in multiple-quantum-well active regions because the SDs near the n-type GaN surface are removed by etching. We discuss strategies of in situ engineering on SDs to further improve the IQE in GaInN-based green LEDs on the basis of the results presented in this study.

The influence of thickness of atomic layer deposited Al2O3 films on nanotextured fluorescent 6H-SiC passivation is investigated. The passivation effect on the light emission has been characterized by photoluminescence and time-resolved photoluminescence at room temperature. The results show that 20nm thickness of Al2O3 layer is favorable to observe a large photoluminescence enhancement (25.9%) and long carrier lifetime (0.86ms). This is a strong indication for an interface hydrogenation that takes place during post-thermal annealing. These result show that an Al2O3 layer could serve as passivation in fluorescent SiC based white LEDs applications.

Broadened emission was demonstrated in coaxial GaInN/GaN multiple quantum shell (MQS) nanowires that were monolithically grown by metalorganic chemical vapor deposition. The non-polar GaInN/GaN structures were coaxially grown on n-core nanowires with combinations of three different diameters and pitches. To broaden the emission band in these three nanowire patterns, we varied the triethylgallium (TEG) flow rate and the growth temperature of the quantum barriers and wells, and investigated their effects on the In incorporation rate during MQS growth. At higher TEG flow rates, the growth rate of MQS and the In incorporation rate were promoted, resulting in slightly higher cathodoluminescence (CL) intensity. An enhancement up to 2&ndash, 3 times of CL intensity was observed by escalating the growth temperature of the quantum barriers to 800 &deg, C. Furthermore, decreasing the growth temperature of the quantum wells redshifted the peak wavelength without reducing the MQS quality. Under the modified growth sequence, monolithically grown nanowires with a broaden emission was achieved. Moreover, it verified that reducing the filling factor (pitch) can further promote the In incorporation probability on the nanowires. Compared with the conventional film-based quantum well LEDs, the demonstrated monolithic coaxial GaInN/GaN nanowires are promising candidates for phosphor-free white and micro light-emitting diodes (LEDs).

Embedded growth of an n-GaN cap layer on multi-quantum shells (MQSs) and nanowires through a tunnel junction (TJ) was investigated for the improvement of current injection to the m-plane of the MQSs. Different growth conditions for an n-GaN cap layer were systematically studied to suppress Mg diffusion and void formation, which are serious problems in this structure. At a high temperature of 900 °C and above, the growth rate on a semi-polar r-plane decreased, and large voids were formed at the bottom part of the nanowires owing to the diffusion of Ga atoms from the r-plane to the m-plane. When the growth temperature decreased to 800 °C, the growth rate on both the m-plane and the r-plane increased, and the size of voids decreased. Simultaneously, Mg diffusion also disappeared because of the low growth temperature of 800 °C. It was found that the growth with an extremely low V/III ratio of 20 at low temperatures increases the lateral growth rate on the m-plane, and void formation is fully suppressed when the MQS height is 700 nm or less.

Nonpolar GaInN/GaN multiple-quantum shells (MQSs) on nanowires (NWs) were investigated for high-efficiency light-emitting diodes (LEDs). The growth conditions of NWs were systematically optimized via a continuous growth mode in metal-organic chemical vapour deposition (MOCVD). The In incorporation rate on the m-planes decreased as the growth temperature elaborated, whereas the crystalline quality is improved. The cathodoluminescence (CL) results revealed that longer growth time of the GaInN well can induce additional In-rich droplets and degrade the emission properties of MQSs. The CL emission intensity and the peak wavelength increased as the number of MQS pairs increased from one to three pairs, which was attributed to the increased In incorporation as the diameter enhanced. The linearly enhanced CL emission intensity with barrier thickness was ascribed to the increase of the electron-hole states from the GaN barrier to the wells, resulting in a larger recombination probability. The scanning transmission electron microscopy (STEM) results demonstrated that a thicker barrier shell can suppress the formation of In-rich droplets. Overall, the feasibility of obtaining high-quality m-plane coaxial GaInN/GaN MQSs structures are promising for NW-based white and micro LEDs.

Structural characterizations of core-shell type nanowire-based materials are difficult because of their tiny 3D structure. In this paper, we prepared the GaInN/GaN multi quantum shell (MQS) grown on the sidewall of the n-GaN nanowire, and scanning transmission micro-scope (STEM) and 3D atom probe are employed for detailed structural characterization of such samples. Furthermore, cathodoluminescence (CL) measurement is carried out for characterization of optical properties. As a result of 3D atom probe measurement, an out-diffusion-like profile of In, where In atoms move from the wells to the outer barriers, was observed. This is considered that the incorporated In atoms in the outer barriers come from In–droplets caused on the top c-plane during the growth of GaInN.