Search

A bifunctional Co modified Fe3O4-Mn catalyst was prepared for Fischer-Tropsch synthesis (FTS). The influence of Co loading on the synergistic effect of Fe-Co as well as FTS performance over Fe1CoxMn1 catalysts was studied. Incorporation of Co species into the Fe3O4-Mn catalyst promoted the reduction of iron oxides, increasing iron active sites during FTS. Moreover, the adding of Co species enhanced the electron transfer from Fe to Co metal, which strengthened the synergistic effect of Fe-Co, improving the catalytic performance. The Fe1CoxMn1 catalyst with higher Co loading promoted further the hydrogenation ability, favoring the shifting of the product distribution towards shorter hydrocarbons. Under optimized conditions of 280 °C, 2.0 MPa and 3000 h−1, the highest yield of liquid fuels was obtained for the Fe1Co1Mn1 catalyst.A bifunctional Co modified Fe3O4-Mn catalyst was prepared for Fischer-Tropsch synthesis (FTS). The influence of Co loading on the synergistic effect of Fe-Co as well as FTS performance over Fe1CoxMn1 catalysts was studied. Incorporation of Co species into the Fe3O4-Mn catalyst promoted the reduction of iron oxides, increasing iron active sites during FTS. Moreover, the adding of Co species enhanced the electron transfer from Fe to Co metal, which strengthened the synergistic effect of Fe-Co, improving the catalytic performance. The Fe1CoxMn1 catalyst with higher Co loading promoted further the hydrogenation ability, favoring the shifting of the product distribution towards shorter hydrocarbons. Under optimized conditions of 280 °C, 2.0 MPa and 3000 h−1, the highest yield of liquid fuels was obtained for the Fe1Co1Mn1 catalyst.

A Ni based mesoporous γ-Al2O3 (MA) catalyst was prepared via partial hydrolysis without organic surfactants and employed in the carbon dioxide methanation reaction. The obtained catalysts were characterized by N2 adsorption–desorption, H2-TPR, XRD, XPS, TG, SEM and TEM-EDS techniques. CO2 methanation was performed in a fixed-bed reactor. A high surface area of MA with excellent hydrothermal stability was obtained, which promoted the dispersion of nickel species, producing a better catalytic performance. Incorporation of more NiO species into the Ni/MA catalyst increased the amount of active metallic Ni sties, further improving the catalytic activity and CH4 selectivity. Moreover, the monolithic skeleton of MA with fabric-like walls suppressed the aggregation of active metallic Ni sites and carbon deposition, enhancing the catalyst's stability, which provides a new insight for potential industrial applications.

The fruiting body pattern is an important agronomic trait of the edible fungus Auricularia auricula-judae, and an important breeding target. There are two types of fruiting body pattern: the cluster type and the chrysanthemum type. We identified the fruiting body pattern of 26 test strains, and then constructed two different near-isogenic pools. Then, we developed sequence characterized amplified region (SCAR) molecular markers associated with the fruiting body pattern based on sequence-related amplified polymorphism (SRAP) markers. Ten different bands (189–522 bp) were amplified using 153 pairs of SRAP primers. The SCAR marker “SCL-18” consisted of a single 522-bp band amplified from the cluster-type strains, but not the chrysanthemum strains. This SCAR marker was closely associated with the cluster-type fruiting body trait of A. auricula-judae. These results lay the foundation for further research to locate and clone genes controlling the fruiting body pattern of A. auricula-judae.

Color is an important quality attribute of fungi, and a useful marker for classification, genetic, and molecular research. However, there is much debate over which enzymes play key regulatory roles in pigment synthesis pathways among different fungi and even within the same species. Auricularia cornea is the most widely cultivated mushroom in the genus Auricularia; 1.834 million tons of this mushroom were produced in 2016 in China. Thus, systematic studies on its color inheritance and the genes encoding key enzymes for pigment synthesis have high scientific and economic value. In this study, the white strain ACW001 and the purple strain ACP004 of A. cornea were used as dikaryotic parents. Selfing populations of ACW001 and ACP004 were constructed with their monokaryotic strains. The fruiting body color of the two populations was consistent with that of their parents, confirming that the two parents were color homozygotes. All strains in the hybrid population of the two parents produced purple fruiting bodies. A robust hybrid strain (ACW001-33×ACP004-33) was selected from the hybrid population, and 87 monokaryotic strains of ACW001-33×ACP004-33 were obtained as a mapping population. Finally, a testcross population was constructed by crossing the mapping population with the test strain ACW001-9. The color genotype of each monokaryotic strain in the mapping population was identified by a fruiting test. The genomes of the two monokaryotic strains ACW001-33 and ACP004-33 were sequenced, and then simple sequence repeat (SSR) and sequence-related amplified polymorphism (SRAP) molecular marker primers were developed. Then, 88 pairs of primers that could distinguish the genotypes of the mapping population were used to construct a genetic linkage map. The genetic linkage map consisted of 12 linkage groups (LGs) spanning 1315.2 cM. The color control locus was preliminarily located at 24.5 cM of the 11th LG. Fine-mapping primers were designed based on sequence differences between ACW001-33 and ACP004-33 in the primary location region. Four color control candidate genes were located in an 8.2-kb region of ACW001-33_contig733 and a 9.2-kb region of ACP004-33_contig802. Homologous alignment and prediction of conserved domain analyses indicated that two of the color control candidate genes encoded proteins with unknown function, and the other two, ACP004_g11815 and ACP004_g11816, encoded glutamyl aminotransferases. These two genes were consecutively arranged on ACP004-33_contig802, and were likely to encode key enzymes in the γ-glutamine-4-hydroxy-benzoate (GHB) pigment synthesis pathway. Primers were designed from the flanking sequences of the two genes and used to analyze the testcross population. Products were amplified only from the 30 testcross strains with purple fruiting bodies, confirming the accuracy of the localization results. We discuss the deficiencies and advantages of map-based cloning in fungi vs. plants, and summarize the steps and requirements of the map-based cloning method for fungi. This study has provided novel ideas and methods for locating functional genes in fungi.

Auricularia auricula-judae is a traditional edible fungus that is cultivated widely in China. In this study, a genetic linkage map for A. auricula-judae was constructed using a mapping population consisting of 138 monokaryons derived from a hybrid strain (A119-5). The monokaryotic parent strains A14-5 and A18-119 were derived from two cultivated varieties, A14 (Qihei No. 1) and A18 (Qihei No. 2), respectively. In total, 130 simple sequence repeat markers were mapped. These markers were developed using the whole genome sequence of A. auricula-judae and amplified in A14-5, A18- 119, and the mapping population. The map consisted of 11 linkage groups (LGs) spanning 854 cM, with an average interval length of 6.57 cM. A testcross population was derived from crossing between the monokaryon A184-57 (from the wild strain A184 as a tester strain) and the mapping population. Important agronomic trait-related QTLs, including mycelium growth rate on potato dextrose agar for the mapping population, mycelium growth rate on potato dextrose agar and sawdust for the testcross population, growth period (days from inoculation to fruiting body harvesting), and yield for the testcross population, were identified using the composite interval mapping method. Six mycelium growth raterelated QTLs were identified on LG1 and LG4, two growth period-related QTLs were identified on LG2, and three yieldrelated QTLs were identified on LG2 and LG6. The results showed no linkage relationship between mycelium growth rate and growth period. The present study provides a foundation for locating genes for important agronomic characteristics in A. auricula-judae in the future.

Introduction:Urachal remnant with heterotopic sinus is an extremely rare congenital anomaly, and usually coexists with other congenital anomalies. We report the case of a 32-year-old adult male with urachal remnant with heterotopic sinus.Patient concerns:A 32-year-old adult male presented wi

Female Exopalaemon carinicauda at ovarian maturation stage II rearing by artificial propagation in the laboratory were chosen as test material. The shrimps were gradually acclimated to the experimental salinity levels of 2, 5, 10, 15, 20, 25 and 30 to determine the effects of salinity on spawning, embryonic development and larval growth of E. carinicauda. The results showed that the ovaries of female E. carinicauda could mature at all test salinity levels. However, it failed to spawn at salinity 2. Salinity levels from 10 to 20 were the most favorable for female E. carinicauda spawning. Although larval development was most successful in eggs incubated at salinity levels of 5 to 30, embryonic development were significantly affected by salinity, and the egg incubation period was shorter at salinities of 15, 20 and 25 than at the other salinities. There were no significant effects of salinity on the rates of larval metamorphosis and survival, but the dry mass of individuals was significantly affected by salinity. The dry mass of shrimps reared at salinities of 15 and 20 were significantly higher than at the other salinities. The growth of 20-day old shrimps was significantly affected by salinity. The specific growth rate increased with the increasing salinity level from 5 to 20, and then decreased at the salinity above 20. The mRNA level of gill Na(+)-K(+)-ATPase was high at high and low salinities, and the lowest at the theoretical salinity 17.5, which might be equal to the hemolymph osmotic pressure of E. carinicauda. It was implied that female parent E. carinicauda could reproduce in a wide range of salinities, while 20-day old shrimps presented higher growth rates at salinities near its theoretical isosmotic point.

The effect of ultrasonics in a biological activated carbon membrane reactor on the removal of organic pollutants in micro-polluted water was investigated through parallel experiments. Results showed that ultrasonics at a power of 10 W could enhance biological activity significantly. The effect of ultrasonic treatment could be maintained for 24 h, so the time interval for ultrasonic treatment should be set at 24 h. The ultrasonic effect on biodegradation was studied through the organic load of the bioreactor, 2,3,5-triphenyl tetrazoliumchloride-dehydrogenase activity (TTC-DHA) of biological activated carbon and the apparent molecular size distribution (AMSD) of the organic compounds in influent and effluent water. The ultrasonic field in the reactor was analyzed and the mechanism of biological activity enhancement by ultrasonics was investigated.

The adsorption characteristics and kinetics of 2,4-Dichlorophenol (2,4-DCP) by biological activated carbon (BAC) was studied through contrast experiments with conventional activated sludge alone or quartz as the carrier. The advantage and disadvantage of removing 2,4-DCP using BAC and the mechanism of this process were investigated. The results show that the method of removing 2,4-DCP by BAC is applicable in practices, and the process of BAC demonstrates high removal rate than the process of suspended activated sludge and biofilm with quartz as the carrier. In addition, the BAC process showed high resistance to shock loadings, therefore, it is suitable to be utilized at high organic loading and under long-term operation. In BAC-system, activated carbon could not only adsorb 2,4-DCP but also oxidized 2,4-DCP.

Objective The present study aimed at investigating whether non-surgical periodontal treatment can reduce the Haemoglobin A1c (HbA1c) % level in type 2 diabetic patients. Methods A search of the literature on English publications was performed in Cochrane Central, Medline, ISI Web of Knowledge and EMBASE (until 06 February 2014). An RCT was selected if the subject was type 2 diabetic patients diagnosed with chronic periodontitis, and compared HbA1c% change after non-surgical periodontal treatment alone for at least three months of the study duration. Weighted mean difference for pooled data and large sample size strata were calculated. Heterogeneity and publication bias were explored. Results After the study selection process, only 9 RCTs were suitable. Compared to the control group, the pooled analysis (n=1082) showed −0.27 % (95 % CI:-0.46 % to −0.07 %, p= 0.007) absolute difference in HbA1c % with treatment while studies with sufficient sample size had HbA1c % change of −0.014 % (95 % CI:-0.18 % to 0.16 %, p= 0.87). Publication bias was marginally significant with Egger’s teat (p=0.045) but not with Begg’s test (p=0.72). Conclusion The moderate reduction in HbA1c after the non-surgical therapy in patients with type 2 diabetes is consistent with previous systematic reviews. However, more large scale and high-quality RCTs are necessitated to confirm these results. Electronic supplementary material The online version of this article (doi:10.1186/s13063-015-0810-2) contains supplementary material, which is available to authorized users.