26 results on '"Yang, Wanfeng"'
Search Results
2. Design of Electrocatalysts and Electrochemical Cells for Carbon Dioxide Reduction Reactions.
- Author
-
Yang, Wanfeng, Dastafkan, Kamran, Jia, Chen, and Zhao, Chuan
- Subjects
- *
ELECTRIC battery design & construction , *ELECTROCATALYSTS , *CARBON dioxide reduction , *ELECTROCHEMICAL analysis , *CATALYSTS - Abstract
Abstract: Electrochemical carbon dioxide (CO2) reduction can produce valuable carbonaceous compounds that are in significant demand, due to its ability to decrease the accumulated atmospheric CO2 and improve the intermittent nature of renewable energy sources. Considering the sluggish kinetics of CO2 reduction reaction, the multielectron–proton transfer process, and the inevitable mixed reduction products, designing efficient and robust electrocatalysts that benefit from the structure–activity relationship is the focus to promote CO2 conversion. In this review, various metal‐based materials are first classified and discussed in terms of their structural and elemental compositions for catalytic behaviors. Afterward, the most intrinsic microstructural/electronic effects as well as the influence of compositional alteration on the catalyst activity, selectivity, and stability are summarized. Additionally, recent attempts to develop the assigned electrochemical cells are surveyed and described from a technological point of view. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
3. Formation, lithium storage properties, and mechanism of nanoporous germanium fabricated by dealloying.
- Author
-
Wang, Shengzhen, Ma, Wensheng, Yang, Wanfeng, Bai, Qingguo, Gao, Hui, Peng, Zhangquan, and Zhang, Zhonghua
- Subjects
- *
GERMANIUM , *ELECTRIC batteries , *LITHIATION , *LITHIUM-ion batteries , *X-ray diffraction , *ANODES - Abstract
Germanium (Ge) has become a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity and decent electron/ion conductivity, but it exhibits inferior lifespan caused by dramatic volume variations during the (de)lithiation process. Herein, hierarchically, nanoporous Ge (np-Ge) was fabricated by the combination of selective phase corrosion with chemical dealloying. As an anode for LIBs, the np-Ge electrode exhibits marvelous cycling stability with capacity retentions of 1060.0 mA h g−1 at 0.2 A g−1 and 767.1 mA h g−1 at 1 A g−1 after 100 cycles. Moreover, the electrode shows excellent rate capability with a capacity retention of 844.2 mA h g−1 at 5 A g−1. Noticeably, the (de)lithiation mechanisms of np-Ge and porous Si–Ge (p-Si6Ge4) were unveiled by operando X-ray diffraction. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
4. Free-standing CuO nanoflake arrays coated Cu foam for advanced lithium ion battery anodes.
- Author
-
Yang, Wanfeng, Wang, Jiawei, Ma, Wensheng, Dong, Chaoqun, Cheng, Guanhua, and Zhang, Zhonghua
- Subjects
- *
LITHIUM-ion batteries , *COPPER oxide , *ELECTRIC conductivity , *STRUCTURAL stability , *ELECTRIC capacity , *OXIDATION - Abstract
For lithium ion batteries (LIBs), low electronic conductivity of CuO leads to rapid capacity decay and poor structural stability. Herein, we successfully fabricate three-dimensional CuO nanoflake arrays coated Cu foam by facile and efficient electrochemical oxidation. When being applied as anode material for LIBs, the CuO electrodes deliver stable reversible capacities of 523.9 mA h g −1 at 0.5 A g −1 , 376.1 mA h g −1 at 1.0 A g −1 and 322.7 mA h g −1 at 2.0 A g −1 with high coulombic efficiency (>99%) after 100 cycles. A long cycle life of up to 400 cycles at 2.0 A g −1 is also achieved with the retention capacity of 193.5 mA h g −1 . Moreover, the electrode exhibits excellent rate capability and can regain its original capacities as reversing to the low current densities. Noticeably, on-line differential electrochemical mass spectrometry and in situ Raman measurements confirm the formation of solid electrolyte interface film and the conversion mechanism for the CuO electrodes, respectively. The superior lithium storage performance can be attributed to the favorable nanoflake structures with high surface area and the perfect electrical contact between CuO and Cu substrate. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
5. Activating inert antimony for selective CO2 electroreduction to formate via bimetallic interactions.
- Author
-
Yang, Wanfeng, Si, Conghui, Zhao, Yong, Wei, Qingru, Jia, Guixing, Cheng, Guanhua, Qin, Jingyu, and Zhang, Zhonghua
- Subjects
- *
ANTIMONY , *CATALYTIC activity , *CARBON dioxide , *ELECTROLYTIC reduction , *ELECTROCATALYSIS , *HYDROGEN evolution reactions , *ENERGY consumption - Abstract
Antimony (Sb) as a low-toxic and cost-effective metal is a promising material to catalyse CO 2 electroreduction to formate with practical viability. However, monometallic Sb suffers from intrinsically low catalytic activity and the competing hydrogen evolution. Here, we report nanoporous Sb-Bi alloys for substantially improving the catalytic activity of Sb and suppressing hydrogen evolution. The optimal Sb-Bi alloy exhibits a maximum Faradaic efficiency of 95.8 % toward formate production, surpassing the 11.6 % of monometallic Sb counterpart. Operating the catalyst in the flow cell demonstrates a formate partial current density of 734 mA cm−2 and cathodic energy efficiency of 59 % at a moderate overpotential of 800 mV, representing a record formate-production performance so far. Experimental and theoretical studies indicate that the Sb-Bi interactions activate Sb sites to selectively stabilize *OCHO intermediates, facilitating CO 2 -to-formate conversion. This work offers insights in manipulating bimetallic interactions to transform inert materials into active catalysts for efficient electrocatalysis. [Display omitted] • Sb-Bi interactions induce electrocatalytic switching from HER to CO 2 ER. • Sb 2 Bi 6 exhibits a maximum formate selectivity of 95.8 % in an H-type cell. • Sb 2 Bi 6 achieves a record formate activity of 734 mA cm−2 in a flow cell. • Sb-Bi interactions facilitate Sb sites to stabilize *OCHO for formate formation. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
6. Duplex PCR Detection of Pseudomonas savastanoi pv. phaseolicola and Curtobacterium flaccumfaciens pv. flaccumfaciens in Soybean.
- Author
-
Liu Yan, Yang Wanfeng, Liu Xiang, Shao Prize, Chen Yunqing, and Zhao Wenjun
- Subjects
- *
POLYMERASE chain reaction methodology , *PSEUDOMONAS diseases , *SOYBEAN yield , *PLANT gene isolation , *PLANT-pathogen relationships - Abstract
The paper aimed to establish a duplex PCR method for simultaneous detection of Pseudomonas savastanoi pv. Phaseolicola (Psp) and Curtobacterium flaccumfaciens pv. Flaccumfaciens (Cff). Based on the argK gene of Psp in GenBank, the primers PSPF1/PSPR2 were designed. The duplex PCR assay was developed using the combined primers PSPF1/PSPR2 and CffFl/CffR2, which were specific primers for Cff. The reaction conditions were optimized and specificity and sensitivity of the duplex PCR were tested. The expected DNA fragment was specifically amplified from the genomic DNA of Psp and Cff. Specificity was confirmed in the artificially inoculated soybean samples imported. Thus, the duplex PCR developed in this study could be used for the simultaneous detection of Psp and Cff horn imported soybean. [ABSTRACT FROM AUTHOR]
- Published
- 2016
7. Alloying/dealloying mechanisms, microstructural modulation and mechanical properties of nanoporous silver via a liquid metal-assisted alloying/dealloying strategy.
- Author
-
Shi, Yujun, Yang, Wanfeng, Bai, Qingguo, Qin, Jingyu, and Zhang, Zhonghua
- Subjects
- *
LIQUID alloys , *NANOPOROUS materials , *LIQUID metals , *ALLOYS , *GALLIUM alloys , *SILVER alloys , *SILVER , *X-ray diffraction - Abstract
• A simple liquid Ga assisted-alloying/dealloying strategy to fabricate nanoporous Ag. • The thickness of alloy layer/nanoporous Ag varies with the mass loading of Ga. • The bimodal wire-like and unimodal bulk-like nanoporous Ag is obtained. • The substrate-supported nanoporous Ag exhibits excellent mechanical properties. The substrate-supported nanoporous Ag with controllable thickness and different morphologies (bulk-like and wire-like) is fabricated via the liquid Ga-assisted alloying/dealloying strategy. [Display omitted] Nanoporous metals show great potentials in various applications including catalysis, sensing, actuation and supercapacitors. The liquid Ga-assisted alloying/dealloying strategy is a feasible and scalable way to fabricate substrate-supported nanoporous metals. However, the influence of intrinsic alloying mode and mechanism on the formation and modulation of nanoporous structure has not been thoroughly explored before. In this work, after painting liquid Ga on Ag foil, both the bulk-like Ag 3 Ga (in the Ag-rich zone) and wire-like Ag 3 Ga (in the liquid Ga-rich zone) form owing to the interdiffusion of Ag and Ga atoms. Correspondingly, the bimodal wire-like and unimodal bulk-like nanoporous Ag is obtained because of the structure inheritance during dealloying. In addition, the thickness of alloy layer (nanoporous layer) versus mass loading of liquid Ga follows a good linear relationship. The in-situ X-ray diffraction of dealloying from Ag 3 Ga to nanoporous Ag illustrates no other intermetallic phase appears and the dealloying process can be described by the dissolution-surface diffusion model. More importantly, the substrate-supported nanoporous Ag exhibits excellent mechanical properties which are of great importance to the future applications of nanoporous metals. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
8. Microstructural/Compositional Regulations and Actuation Properties of Nanoporous Ternary CuMnNi Alloys Fabricated by Electrochemical Dealloying.
- Author
-
Tan, Fuquan, Yan, Xuejiao, Yang, Wanfeng, Sun, Yue, Bai, Qingguo, and Zhang, Zhonghua
- Subjects
- *
TERNARY alloys , *PRECIOUS metals , *STRAINS & stresses (Mechanics) , *PIEZOELECTRIC ceramics , *CONDUCTING polymers , *ALLOYS , *NANOPOROUS materials , *SHAPE memory alloys - Abstract
Metallic actuators have received a wide range of attention in the past two decades because of their larger strains than piezoelectric ceramics and higher strength relative to conducting polymers. However, the metallic actuators composed of noble metals are limited to the high material cost for further development and practical applications. Here, nanoporous CuMnNi (np‐CMN) alloys are fabricated from a ternary Mn70Cu20Ni10 precursor through an electrochemical dealloying method, and their microstructures/compositions are further regulated through different electrochemical processes (multi‐step and two‐step). The np‐CMN alloys show good electrochemical actuation properties in 1 m NaOH solution, and the sample obtained from two‐step dealloying exhibits much better actuation performance than that from multi‐step dealloying. The maximum strain amplitude of np‐CMN could reach up to 0.46%, which is comparable to or even better than that of noble metal‐based actuators. Our work indicates that the low‐cost np‐CMN alloy could be a competitive material among electrochemical metallic actuators. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
9. Vapor phase dealloying-driven synthesis of bulk nanoporous cobalt with a face-centered cubic structure.
- Author
-
Shi, Yujun, Wang, Yu, Yang, Wanfeng, Qin, Jingyu, Bai, Qingguo, and Zhang, Zhonghua
- Subjects
- *
NANOPOROUS materials , *GASES , *COBALT , *VAPORS , *TEMPERATURE effect , *MAGNETIC properties - Abstract
Cobalt (Co) mainly exists in two allotropic forms: a low temperature hexagonal close-packed (HCP) structure and a high temperature face-centered cubic (FCC) structure. However, annealing at high temperature only induces the formation of FCC-Co on the surface of a bulk sample and fabrication of bulk FCC-Co is still a great challenge. In this work, nanoporous FCC-Co with a macroscopic dimension is successfully fabricated via a vapor phase alloying (VPA)–vapor phase dealloying (VPD) strategy using zinc (Zn) as the vapor source. Moreover, the thickness of the nanoporous layer could be modulated by adjusting the VPA time. The bulk nanoporous FCC-Co with different shapes and sizes can be fabricated owing to the flexibility and reactivity of the Zn vapor. Both the temperature effect and the size influence contribute to the formation of bulk FCC-Co during the VPD process. In addition, nanoporous FCC-Co shows different magnetic properties as benchmarked with pristine HCP-Co. Our findings provide a new methodology for the preparation of bulk nanoporous FCC-Co which may exhibit unique properties and potential applications. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
10. Surface Reconstruction of Ultrathin Palladium Nanosheets during Electrocatalytic CO2 Reduction.
- Author
-
Zhao, Yong, Tan, Xin, Yang, Wanfeng, Jia, Chen, Chen, Xianjue, Ren, Wenhao, Smith, Sean C., and Zhao, Chuan
- Subjects
- *
SURFACE reconstruction , *CARBON dioxide , *SURFACE chemistry , *PALLADIUM , *CATALYSTS , *ELECTROLYTIC reduction - Abstract
A surface reconstructing phenomenon is discovered on a defect‐rich ultrathin Pd nanosheet catalyst for aqueous CO2 electroreduction. The pristine nanosheets with dominant (111) facet sites are transformed into crumpled sheet‐like structures prevalent in electrocatalytically active (100) sites. The reconstruction increases the density of active sites and reduces the CO binding strength on Pd surfaces, remarkably promoting the CO2 reduction to CO. A high CO Faradaic efficiency of 93 % is achieved with a site‐specific activity of 6.6 mA cm−2 at a moderate overpotential of 590 mV on the reconstructed 50 nm Pd nanosheets. Experimental and theoretical studies suggest the CO intermediate as a key factor driving the structural transformation during CO2 reduction. This study highlights the dynamic nature of defective metal nanosheets under reaction conditions and suggests new opportunities in surface engineering of 2D metal nanostructures to tune their electrocatalytic performance. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
11. Surface Reconstruction of Ultrathin Palladium Nanosheets during Electrocatalytic CO2 Reduction.
- Author
-
Zhao, Yong, Tan, Xin, Yang, Wanfeng, Jia, Chen, Chen, Xianjue, Ren, Wenhao, Smith, Sean C., and Zhao, Chuan
- Subjects
- *
SURFACE reconstruction , *CARBON dioxide , *SURFACE chemistry , *PALLADIUM , *CATALYSTS , *ELECTROLYTIC reduction - Abstract
A surface reconstructing phenomenon is discovered on a defect‐rich ultrathin Pd nanosheet catalyst for aqueous CO2 electroreduction. The pristine nanosheets with dominant (111) facet sites are transformed into crumpled sheet‐like structures prevalent in electrocatalytically active (100) sites. The reconstruction increases the density of active sites and reduces the CO binding strength on Pd surfaces, remarkably promoting the CO2 reduction to CO. A high CO Faradaic efficiency of 93 % is achieved with a site‐specific activity of 6.6 mA cm−2 at a moderate overpotential of 590 mV on the reconstructed 50 nm Pd nanosheets. Experimental and theoretical studies suggest the CO intermediate as a key factor driving the structural transformation during CO2 reduction. This study highlights the dynamic nature of defective metal nanosheets under reaction conditions and suggests new opportunities in surface engineering of 2D metal nanostructures to tune their electrocatalytic performance. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
12. Isolated Diatomic Ni‐Fe Metal–Nitrogen Sites for Synergistic Electroreduction of CO2.
- Author
-
Ren, Wenhao, Tan, Xin, Yang, Wanfeng, Jia, Chen, Xu, Shumao, Wang, Kaixue, Smith, Sean C., and Zhao, Chuan
- Subjects
- *
ELECTROLYTIC reduction , *HETEROGENEOUS catalysts , *DENSITY functional theory , *CARBON dioxide reduction , *ELECTROLYSIS - Abstract
Polynary single‐atom structures can combine the advantages of homogeneous and heterogeneous catalysts while providing synergistic functions based on different molecules and their interfaces. However, the fabrication and identification of such an active‐site prototype remain elusive. Here we report isolated diatomic Ni‐Fe sites anchored on nitrogenated carbon as an efficient electrocatalyst for CO2 reduction. The catalyst exhibits high selectivity with CO Faradaic efficiency above 90 % over a wide potential range from −0.5 to −0.9 V (98 % at −0.7 V), and robust durability, retaining 99 % of its initial selectivity after 30 hours of electrolysis. Density functional theory studies reveal that the neighboring Ni‐Fe centers not only function in synergy to decrease the reaction barrier for the formation of COOH* and desorption of CO, but also undergo distinct structural evolution into a CO‐adsorbed moiety upon CO2 uptake. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
13. Isolated Diatomic Ni‐Fe Metal–Nitrogen Sites for Synergistic Electroreduction of CO2.
- Author
-
Ren, Wenhao, Tan, Xin, Yang, Wanfeng, Jia, Chen, Xu, Shumao, Wang, Kaixue, Smith, Sean C., and Zhao, Chuan
- Subjects
- *
IRON-nickel alloys , *ELECTROLYTIC reduction , *DIATOMIC molecules , *NITROGEN , *CARBON dioxide - Abstract
Polynary single‐atom structures can combine the advantages of homogeneous and heterogeneous catalysts while providing synergistic functions based on different molecules and their interfaces. However, the fabrication and identification of such an active‐site prototype remain elusive. Here we report isolated diatomic Ni‐Fe sites anchored on nitrogenated carbon as an efficient electrocatalyst for CO2 reduction. The catalyst exhibits high selectivity with CO Faradaic efficiency above 90 % over a wide potential range from −0.5 to −0.9 V (98 % at −0.7 V), and robust durability, retaining 99 % of its initial selectivity after 30 hours of electrolysis. Density functional theory studies reveal that the neighboring Ni‐Fe centers not only function in synergy to decrease the reaction barrier for the formation of COOH* and desorption of CO, but also undergo distinct structural evolution into a CO‐adsorbed moiety upon CO2 uptake. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
14. Sodium storage mechanisms of bismuth in sodium ion batteries: An operando X-ray diffraction study.
- Author
-
Gao, Hui, Ma, Wensheng, Yang, Wanfeng, Wang, Jiawei, Niu, Jiazheng, Luo, Fakui, Peng, Zhangquan, and Zhang, Zhonghua
- Subjects
- *
NANOSTRUCTURED materials synthesis , *PERFORMANCE of storage batteries , *BISMUTH , *SODIUM ions , *X-ray diffraction - Abstract
Understanding the sodium (Na) chemistry is crucial for development of high-performance sodium ion batteries (SIBs). Nanostructured bismuth (Bi) has shown great potentials as an anode in SIBs, however, the Na storage mechanisms of Bi are still unclear. Herein, the operando X-ray diffraction (XRD) technique was utilized to probe the Na storage mechanisms of three Bi anodes (sputtered Bi film, nanoporous Bi and commercial Bi). Despite different morphologies and sizes, all the Bi anodes follow the same two-step reversible alloying/dealloying mechanisms (Bi ↔ NaBi ↔ Na 3 Bi) during the discharge/charge processes, associated with two voltage plateaus. As for the intercalation/deintercalation mechanism proposed for nanostructured Bi anodes in SIBs, we rationalize the reason why only the Bi phase is detected in the discharged/charged samples under ex-situ XRD conditions through addressing the stability issue of the Na-Bi system (NaBi and Na 3 Bi). [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
15. High Throughput Preparation of Ag-Zn Alloy Thin Films for the Electrocatalytic Reduction of CO 2 to CO.
- Author
-
Sun, Jiameng, Yu, Bin, Yan, Xuejiao, Wang, Jianfeng, Tan, Fuquan, Yang, Wanfeng, Cheng, Guanhua, and Zhang, Zhonghua
- Subjects
- *
CARBON dioxide , *THIN films , *ALLOYS , *CATALYTIC activity , *AQUEOUS electrolytes , *BINDING energy , *ALUMINUM-zinc alloys , *SILVER alloys - Abstract
Ag-Zn alloys are identified as highly active and selective electrocatalysts for CO2 reduction reaction (CO2RR), while how the phase composition of the alloy affects the catalytic performances has not been systematically studied yet. In this study, we fabricated a series of Ag-Zn alloy catalysts by magnetron co-sputtering and further explored their activity and selectivity towards CO2 electroreduction in an aqueous KHCO3 electrolyte. The different Ag-Zn alloys involve one or more phases of Ag, AgZn, Ag5Zn8, AgZn3, and Zn. For all the catalysts, CO is the main product, likely due to the weak CO binding energy on the catalyst surface. The Ag5Zn8 and AgZn3 catalysts show a higher CO selectivity than that of pure Zn due to the synergistic effect of Ag and Zn, while the pure Ag catalyst exhibits the highest CO selectivity. Zn alloying improves the catalytic activity and reaction kinetics of CO2RR, and the AgZn3 catalyst shows the highest apparent electrocatalytic activity. This work found that the activity and selectivity of CO2RR are highly dependent on the element concentrations and phase compositions, which is inspiring to explore Ag-Zn alloy catalysts with promising CO2RR properties. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
16. Bifunctional nanoporous ruthenium-nickel alloy nanowire electrocatalysts towards oxygen/hydrogen evolution reaction.
- Author
-
Liu, Na, Zhai, Zhihua, Yu, Bin, Yang, Wanfeng, Cheng, Guanhua, and Zhang, Zhonghua
- Subjects
- *
ELECTROCATALYSTS , *HYDROGEN evolution reactions , *OXYGEN evolution reactions , *ALLOYS - Abstract
A class of ruthenium-nickel alloy catalysts featured with nanoporous nanowires (NPNWs) were synthesized by a strategy combining rapid solidification with two-step dealloying. RuNi NPNWs exhibit excellent electrocatalytic activity and stability for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in which the RuNi-2500 NPNWs catalyst shows an OER overpotential of 327 mV to deliver a current density of 10 mA cm−2 and the RuNi-0 NPNWs catalyst requires the overpotential of 69 mV at 10 mA cm−2 showing the best HER activity in alkaline media. Moreover, the RuNi-1500 NPNWs catalyst was used as the bifunctional electrocatalyst in a two-electrode alkaline electrolyzer for water splitting, which exhibits a low cell voltage of 1.553 V and a long-term stability of 24 h at 10 mA cm−2, demonstrating that the RuNi NPNWs catalysts can be considered as promising bifunctional alkaline electrocatalysts. A class of ruthenium-nickel alloy catalysts featured with nanoporous nanowires (NPNWs) was synthesized by a strategy combined rapid solidification with two-step dealloying, in which the total cell voltage of RuNi-1500 NPNWs electrolyzer for water splitting is 1.553 V to deliver a current density of 10 mA cm−2. [Display omitted] • A two-step dealloying strategy was used to prepare RuNi catalysts. • RuNi catalysts exhibit a unique nanoporous nanowires (NPNWs) morphology. • RuNi NPNWs catalysts show excellent electrocatalytic performance for OER and HER. • RuNi NPNWs catalysts can be used as bifunctional catalysts for water splitting. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
17. High throughput preparation of Ni–Mo alloy thin films as efficient bifunctional electrocatalysts for water splitting.
- Author
-
Sun, Jiameng, Yu, Bin, Tan, Fuquan, Yang, Wanfeng, Cheng, Guanhua, and Zhang, Zhonghua
- Subjects
- *
ELECTROCATALYSTS , *HYDROGEN evolution reactions , *BIMETALLIC catalysts , *THIN films , *ALLOYS , *HYDROGEN production - Abstract
The synthesis of cost-effective and high-performance electrocatalysts for water splitting is the main challenge in electrochemical hydrogen production. In this study, we adopted a high throughput method to prepare bi-metallic catalysts for oxygen/hydrogen evolution reactions (OER/HER). A series of Ni–Mo alloy electrocatalysts with tunable compositions were prepared by a simple co-sputtering method. Due to the synergistic effect between Ni and Mo, the intrinsic electrocatalytic activity of the Ni–Mo alloy electrocatalysts is improved, resulting in excellent HER and OER performances. The Ni 90 Mo 10 electrocatalyst shows the best HER performance, with an extremely low overpotential of 58 mV at 10 mA cm−2, while the Ni 40 Mo 60 electrocatalyst shows an overpotential of 258 mV at 10 mA cm−2 in OER. More significantly, the assembled Ni 40 Mo 60 //Ni 90 Mo 10 electrolyzer only needs a cell voltage of 1.57 V to reach 10 mA cm−2 for overall water splitting. [Display omitted] • A high throughput method was used to prepare Ni–Mo alloy catalysts. • Ni–Mo alloy catalysts exhibit remarkable activity and stability for HER and OER. • The Ni–Mo alloy acts as a bifunctional catalyst for overall water splitting. • The synergistic effect between Ni and Mo leads to the excellent performances. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
18. Nitrogen Vacancy Induced Coordinative Reconstruction of Single‐Atom Ni Catalyst for Efficient Electrochemical CO2 Reduction.
- Author
-
Jia, Chen, Li, Shunning, Zhao, Yong, Hocking, Rosalie K., Ren, Wenhao, Chen, Xianjue, Su, Zhen, Yang, Wanfeng, Wang, Yuan, Zheng, Shisheng, Pan, Feng, and Zhao, Chuan
- Subjects
- *
ACTIVATION energy , *CATALYSTS , *DENSITY functional theory , *NITROGEN , *TRANSITION metals , *X-ray spectroscopy , *HYDROGEN evolution reactions - Abstract
Transition metal nitrogen carbon based single‐atom catalysts (SACs) have exhibited superior activity and selectivity for CO2 electroreduction to CO. A favorable local nitrogen coordination environment is key to construct efficient metal‐N moieties. Here, a facile plasma‐assisted and nitrogen vacancy (NV) induced coordinative reconstruction strategy is reported for this purpose. Under continuous plasma striking, the preformed pentagon pyrrolic N‐defects around Ni sites can be transformed to a stable pyridinic N dominant Ni‐N2 coordination structure with promoted kinetics toward the CO2‐to‐CO conversion. Both the CO selectivity and productivity increase markedly after the reconstruction, reaching a high CO Faradaic efficiency of 96% at mild overpotential of 590 mV and a large CO current density of 33 mA cm‐2 at 890 mV. X‐ray adsorption spectroscopy and density functional theory (DFT) calculations reveal this defective local N environment decreases the restraint on central Ni atoms and provides enough space to facilitate the adsorption and activation of CO2 molecule, leading to a reduced energy barrier for CO2 reduction. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
19. NiCo2O4/biomass-derived carbon composites as anode for high-performance lithium ion batteries.
- Author
-
Zhang, Chi, Xie, Zhuohong, Yang, Wanfeng, Liang, Yi, Meng, Dingding, He, Xin, Liang, Ping, and Zhang, Zhonghua
- Subjects
- *
LITHIUM-ion batteries , *CARBON composites , *TRANSITION metal oxides , *ANODES , *METALLIC oxides - Abstract
Low electronic conductivity and drastic volume change during cycling of transition metal oxides, as anodes for lithium ion batteries (LIBs), lead to rapid capacity decay and poor structural stability. Herein, nanostructured NiCo 2 O 4 anchored on carbon sheets was synthesized by a facile hydrothermal method with following thermal treatment. The wrinkled carbon substrate in the composite derives from the carbonization of pomelo peels, which can be mass-produced for the large-scale application. This composite shows mesoporous structures with high specific surface areas and intimate NiCo 2 O 4 /carbon interfaces, which favors the alleviation of the volume expansion/shrink during charging/discharging process and improves the electron/mass transport, enhancing the capability and stability for LIBs. This composite delivers a high reversible capacity of 473.7 mA h g−1 after 210 cycles at a current density of 500 mA g−1. A long cycle life of up to 1100 cycles at 2000 mA g−1 is achieved with the retention capacity of 363 mA h g−1. The electrode also exhibits excellent rate capability and can regain its original capacities as reversing to the low current densities. This work highlights the biomass-derived carbon-supported metal oxides as an environmentally friendly and economic strategy for advanced LIBs. • Carbon substrate as buffer for anode materials can be derived from pomelo peels. • Cycling stability of NiCo 2 O 4 is improved by depositing it on carbon substrate. • Faster Li+ diffusion coefficients are obtained with the existence of carbon. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
20. Elucidating role of alloying in electrocatalytic hydrogenation of benzaldehyde over nanoporous NiPd catalysts.
- Author
-
Cheng, Guanhua, Zhai, Zhihua, Sun, Jiameng, Ran, Yunfei, Yang, Wanfeng, Tan, Fuquan, and Zhang, Zhonghua
- Subjects
- *
BENZALDEHYDE , *HYDROGENATION , *STANDARD hydrogen electrode , *CATALYSTS , *ALLOYS , *INFRARED absorption , *CATALYTIC hydrogenation - Abstract
Alloying Ni with Pd lowers the overpotential of benzaldehyde hydrogenation and obtains a reaction rate 20 times higher than that of Ni at 0.1 V vs. RHE, which is ascribed to the lower binding energy of benzaldehyde on the metal surface revealed by the in-situ IR study. [Display omitted] • Nanoporous nanowire NiPd alloys were synthesized using a dealloying method. • Alloying Ni and Pd lowers the overpotential of ECH of benzaldehyde. • The activity of NiPd alloy is comparable with Pd. • In-situ IR study reveals that Pd tunes the binding strength of adsorbed benzaldehyde. Ni is one of the most promising catalysts in aldehydes hydrogenation, although the high overpotential and low Faradaic efficiency limit its electrocatalytic performances. Here we introduce an effective and facile alloying strategy to tune the electronic structure of Ni. We demonstrate that alloying Pd to Ni can significantly boost the electrocatalytic performances of benzaldehyde hydrogenation and lower the overpotential to the level of pure Pd. Pd introduction enhances the electrocatalytic hydrogenation process over hydrogen evolution reaction (HER), and results in an increased Faradaic efficiency. The npnw-Ni 82 Pd 18 catalyst shows the optimal atomic ratio of Ni and Pd among the explored catalysts, and achieved a turnover frequency (TOF) value of 1387 mol mol metal -1h-1 at -0.1 V vs. reversible hydrogen electrode (RHE), higher than that of npnw-Ni (60 mol mol metal -1h-1) and comparable to np-Pd (1306 mol mol metal -1h-1) under the same reaction conditions. In-situ surface-enhanced infrared absorption spectroscopy study reveals that the electronic interactions between Ni and Pd would activate the adsorbed benzaldehyde, and therefore result in an enhanced activity in benzaldehyde hydrogenation. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
21. A high-performance room-temperature magnesium ion battery with self-healing liquid alloy anode mediated with a bifunctional intermetallic compound.
- Author
-
Song, Meijia, Wang, Yan, Yu, Bin, Yang, Wanfeng, Cheng, Guanhua, Cui, Wenrun, and Zhang, Zhonghua
- Subjects
- *
LIQUID alloys , *INTERMETALLIC compounds , *MAGNESIUM ions , *LIQUID metals , *ANODES , *ALLOYS , *MAGNESIUM alloys , *EUTECTIC alloys - Abstract
A room-temperature Ag 3 Ga-mediated liquid EGaSn anode with improved wettability for advanced Mg ion batteries. [Display omitted] • The room-temperature Ag 3 Ga-mediated liquid EGaSn anode was simply prepared for MIBs. • Ag 3 Ga can improve the wettability of EGaSn on the substrate and provide capacity. • ssm-Ag 3 Ga-EGaSn shows superior electrochemical performance in half and full cells. • Reaction mechanism of the Ag 3 Ga-mediated liquid EGaSn anode was unveiled. Liquid metals with a self-healing property can address the passivation issue of Mg metal and the huge volume variation problem of solid alloy-type anodes in rechargeable magnesium ion batteries (MIBs). Liquid Ga-based anodes show great potentials in MIBs, however, being operated at room temperature is a great challenge. Herein, a novel strategy is proposed to enhance the room-temperature Mg storage performance of liquid eutectic GaSn (EGaSn) alloy through constructing a bifunctional intermetallic compound (Ag 3 Ga) layer on the current collector. This Ag 3 Ga layer could greatly improve the wettability of EGaSn on the substrate in the electrolyte environment. Moreover, operando X-ray diffraction confirms that Ag 3 Ga could participate the reversible alloying/dealloying reactions during the discharge/charge processes and thus provide an extra capacity. Eventually, the Ag 3 Ga-mediated EGaSn anode exhibits outstanding electrochemical performance towards Mg storage in both half and full cells at room temperature (∼24 and 21 °C), as benchmarked with state-of-the-art anodes in MIBs. Specially, the MIBs could be stably cycled up to 600 cycles in the half cell configuration, and 100 cycles in the full cell assembly. This work provides useful information on the development of advanced anodes for MIBs. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
22. Dealloying-induced modulation upon porous layer depth of three-dimensional copper current collector for improving lithium plating/stripping capability.
- Author
-
Xu, Yanzhao, Yu, Bin, Wang, Yu, Tan, Fuquan, Cheng, Guanhua, Yang, Wanfeng, Gao, Hui, and Zhang, Zhonghua
- Subjects
- *
SUPERIONIC conductors , *LITHIUM cells , *COPPER , *REDUCTION potential , *SOLID electrolytes , *SCANNING electron microscopy - Abstract
• 3D Cu current collectors were gained by painting-alloying-dealloying and annealing. • The porous structure of 3D Cu was regulated by altering Ga mass and annealing. • The relationships between porous layer depth and performance were explored. • The Li deposition behaviors on 3D/2D Cu were clarified. Lithium metal anode has shown great potentials for achieving high energy density due to its high theoretical capacity and low redox potential, but its application is impeded by the dendrite proliferation and unstable solid electrolyte interface. Herein, three-dimensional (3D) porous Cu current collectors were fabricated via the combination of painting-alloying-dealloying with subsequent annealing, where the depth and length scale of the porous layer can be facilely regulated by controlling the alloying and annealing processes. In lithium metal batteries, the relationship between the Li deposition behavior and the porous layer depth was explored in detail via electrochemical measurements and ex-situ scanning electron microscopy. Notably, the A-3D Cu-14 current collector with the porous layer depth of around 34.5 µm exhibits long lifespan over 430 h at 1 mA cm−2 and low voltage hysteresis, in comparison with the pristine Cu foil and the porous Cu with thinner porous layers. The superior electrochemical performance of A-3D Cu-14 can be attributed to the enhanced suppression effect upon the Li dendrite deriving from the more accommodation capability of its thick porous layer, as well as the better homogenization of the Li+ ion flux caused by the porous structure. Furthermore, the Li@A-3D Cu-14 | LiFePO 4 full cell shows excellent cycling stability and rate capability in full battery tests. Dealloying-induced modulation upon porous layer depth of three-dimensional copper current collector to stabilize the lithium batteries. [Display omitted] [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
23. Facile fabrication of cobalt oxalate nanostructures with superior specific capacitance and super-long cycling stability.
- Author
-
Cheng, Guanhua, Si, Conghui, Zhang, Jie, Wang, Ying, Yang, Wanfeng, Dong, Chaoqun, and Zhang, Zhonghua
- Subjects
- *
MICROFABRICATION , *OXALATES , *COBALT compounds , *NANOSTRUCTURED materials , *ELECTRIC capacity , *TRANSITION metals - Abstract
Transition metal oxalate materials have shown huge competitive advantages for applications in supercapacitors. Herein, nanostructured cobalt oxalate supported on cobalt foils has been facilely fabricated by anodization, and could directly serve as additive/binder-free electrodes for supercapacitors. The as-prepared cobalt oxalate electrodes present superior specific capacitance of 1269 F g −1 at the current density of 6 A g −1 in the galvanostatic charge/discharge test. Moreover, the retained capacitance is as high as 87.2% as the current density increases from 6 A g −1 to 30 A g −1 . More importantly, the specific capacitance of cobalt oxalate retains 91.9% even after super-long cycling of 100,000 cycles. In addition, an asymmetric supercapacitor assembled with cobalt oxalate (positive electrode) and activated carbon (negative electrode) demonstrates excellent capacitive performance with high energy density and power density. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
24. A self-healing room-temperature liquid eutectic GaSn anode with improved wettability for advanced Mg ion batteries.
- Author
-
Song, Meijia, Yu, Bin, Cui, Wenrui, Yang, Wanfeng, Bai, Qingguo, and Zhang, Zhonghua
- Subjects
- *
SELF-healing materials , *ANODES , *WETTING , *EUTECTICS , *MELTING points , *MAGNESIUM ions , *LIQUIDS - Abstract
A self-healing room-temperature liquid eutectic GaSn anode with improved wettability for advanced Mg ion batteries. [Display omitted] • ∙ Self-healing room-temperature liquid EGaSn anodes were simply prepared for MIBs. • ∙ The wettability of liquid EGaSn on ssm-CuGa 2 substrate was significantly improved. • ∙ The ssm-CuGa 2 -EGaSn shows greatly enhanced cycling stability and rate performance. • ∙ Reaction mechanism and self-healing feature of liquid EGaSn anodes were unveiled. Using alloy-type anodes offers an effective method to address the incompatibility issue between Mg metal anodes and conventional electrolytes and also facilitates the development of high performance magnesium ion batteries (MIBs). But the huge volume variations of alloy-type anodes during cycling impair the electrochemical performance of MIBs. Herein, a liquid eutectic GaSn (EGaSn) electrode with a low melting point (20.5 °C) and self-healing property was fabricated through simply painting onto stainless steel mesh (ssm). But the ssm-EGaSn electrode shows unsatisfactory electrochemical performance due to poor wettability of liquid EGaSn on ssm. To overcome this problem, a CuGa 2 layer was constructed to enhance the wettability of liquid EGaSn on the ssm substrate. The modified liquid EGaSn electrode delivers much better electrochemical performance (specific capacity, cycling stability and rate performance) either at ∼ 38 or 28 °C. Furthermore, operando X-ray diffraction and ex situ scanning electron microscopy were conducted to reveal the Mg storage mechanism and self-healing feature of the liquid EGaSn electrode. Noticeably, the liquid EGaSn electrode displays well compatibility with simple Mg salt electrolytes like Mg(TFSI) 2 and the full cell could display stable electrochemical behavior over dozens of cycles. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
25. Enhanced rate performance of nanoporous nickel-antimony anode for sodium ion batteries.
- Author
-
Ma, Wensheng, Guo, Zhiyuan, Xu, Yanzhao, Bai, Qingguo, Gao, Hui, Wang, Weimin, Yang, Wanfeng, and Zhang, Zhonghua
- Subjects
- *
SODIUM ions , *NANOPOROUS materials , *ANODES , *CHARGE transfer , *MASS spectrometry , *X-ray diffraction , *ANTIMONY - Abstract
• Nanoporous NiSb (np-NiSb) alloy was fabricated by a facile dealloying strategy. • The np-NiSb anode exhibits good cycling stability and superior rate capability. • Operando XRD reveals the sodiation/desodiation mechanism of the np-NiSb anode. • On-line DEMS verifies the gas release of half cells with NiSb anode during cycling. Engineering Sb-based anode materials is the key to enhance their electrochemical performance for sodium ion batteries (SIBs) by solving the issues of the rapid capacity decay and poor rate capability. In this work, a nanoporous NiSb alloy (np-NiSb) with a three-dimensionally interconnected ligament-channel structure was synthesized by a facile dealloying strategy. As an anode for SIBs, the np-NiSb alloy exhibits excellent cycling performance, rate capability and stability with a reversible capacity of 334.6 mAh g −1 at 0.2 A g −1 after 100 cycles, 155.6 mAh g −1 at 20 A g −1 and a capacity retention rate of 97% after 100 cycles at 1 A g −1. The nanoporous structure and the introduction of inactive Ni effectively tolerate the dramatic volume changes during the charge/discharge processes, restraining the pulverization of np-NiSb. The unique ligament-channel network structure with an average size of about 30 nm significantly shortens the ion transmission distance, ensuring the fast charge transfer at high rates. Operando X-ray diffraction reveals the sodiation/desodiation mechanism of the np-NiSb anode during the discharge/charge processes. In addition, on-line differential electrochemical mass spectrometry further explores the reaction mechanism of np-NiSb. This work highlights constructing nanoporous Sb-based alloys as an effective strategy to improve the performance of SIBs. [Display omitted] As an anode for SIBs, the np-NiSb alloy with bicontinuous ligament-channel structure exhibits good cycling stability with capacity retention rate of 97% over 100 cycles at 1 A g −1 (279.7 mAh g −1). [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
26. Three-dimensional nanoporous tungsten supported tellurium cathode for Li-Te batteries.
- Author
-
Liang, Ping, Liang, Yi, Si, Conghui, Ma, Wensheng, Zhang, Chi, Yang, Wanfeng, and Zhang, Zhonghua
- Subjects
- *
TELLURIUM , *TUNGSTEN , *CATHODES , *STORAGE batteries - Abstract
Nanoporous tungsten (np-W) synthesized by a facile dealloying strategy was utilized as the host to accommodate tellurium (Te) for Li-Te batteries. The np-W supported Te (np-W-Te) cathode exhibits an excellent specific volumetric capacity of 1168 mA h cm−3 after 30 cycles, a good cycling performance of 200 cycles with a coulombic efficiency over 98.9%, and fast rate capabilities of 1612 mA h cm−3 at a current density of 50 mA g−1 and 774 mA h cm−3 at 800 mA g−1. The excellent performance of the np-W-Te cathode is attributed to the highly dispersed Te impregnated in the np-W host with rich porosity, high conductivity and superior stability. The mechanism investigation by in situ Raman and ex situ XRD techniques demonstrates the reversible transformation between Li and Li 2 Te during the charge/discharge processes. This study highlights the nanoporous metal as a promising host to confine Te for Li-Te batteries. Nanoporous tungsten synthesized by dealloying acted as the host to accommodate Te for Li-Te batteries. ga1 • The as-dealloyed nanoporous W hosted Te as the cathode for Li-Te batteries. • The cathode exhibited high specific capacity, good cycling and rate performances. • The reversible conversion between Te and Li 2 Te is the mechanism for the battery. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.