Search

Transition metal oxides (TMOs) and post-TMOs (PTMOs), when doped with Carbon, show non-volatile current-voltage (I-V) characteristics, which are both universal and repeatable. We have shown spectroscopic evidence of the introduction of carbon-based impurity states inside the existing larger bandgap effectively creating a smaller bandgap which we suggest could enable Mott-like correlation effect. Our findings indicate new insights for yet to be understood unipolar and nonpolar resistive switching in the TMOs and PTMOs. We have shown that device switching is not thermal-energy dependent and have developed an electronic-dominated switching model that allows for the extreme temperature operation (from 1.5 K to 423 K) and state retention up to 673 K for a 1-hour bake. Importantly, we have optimized the technology in an industrial process and demonstrated integrated 1-transistor/1-resistor (1T1R) arrays up to 1 kbit with 47 nm devices on 300 mm wafers for advanced node CMOS-compatible correlated electron RAM (CeRAM). These devices are shown to operate with 2 ns write pulses and retain the memory states up to 200 C for 24 hours. The collection of attributes shown, including scalability to state-of-the-art dimensions, non-volatile operation to extreme low and high temperatures, fast write, and reduced stochasticity as compared to filamentary memories such as ReRAMs show the potential for a highly capable two-terminal back-end-of-line non-volatile memory., Comment: 28 pages, 17 figures, accepted in APL Materials

We present a DevIce-to-System Performance EvaLuation (DISPEL) workflow that integrates transistor and interconnect modeling, parasitic extraction, standard cell library characterization, logic synthesis, cell placement and routing, and timing analysis to evaluate system-level performance of new CMOS technologies. As the impact of parasitic resistances and capacitances continues to increase with dimensional downscaling, component-level optimization alone becomes insufficient, calling for a holistic assessment and optimization methodology across the boundaries between devices, interconnects, circuits, and systems. The physical implementation flow in DISPEL enables realistic analysis of complex wires and vias in VLSI systems and their impact on the chip power, speed, and area, which simple circuit simulations cannot capture. To demonstrate the use of DISPEL, a 32-bit commercial processor core is implemented using theoretical n-type MoS2 and p-type Black Phosphorous (BP) planar FETs at a projected 5-nm node, and the performance is benchmarked against Si FinFETs. While the superior gate control of the MoS2/BP FETs can theoretically provide 51% reduction in the iso-frequency energy consumption, the actual performance can be greatly limited by the source/drain contact resistances. With the large amount of data generated by DISPEL, a neural-network is trained to predict the key performance metrics of the 32-bit processor core using the characteristics of transistors and interconnects as the input features without the need to go through the time-consuming physical implementation flow. The machine learning algorithms show great potentials as a means for evaluation and optimization of new CMOS technologies and identifying the most significant technology design parameters., Comment: 12 pages, 23 figures

3D integration, i.e., stacking of integrated circuit layers using parallel or sequential processing is gaining rapid industry adoption with the slowdown of Moore's law scaling. 3D stacking promises potential gains in performance, power and cost but the actual magnitude of gains varies depending on end-application, technology choices and design. In this talk, we will discuss some key challenges associated with 3D design and how design-for-3D will require us to break traditional silos of micro-architecture, circuit/physical design and manufacturing technology to work across abstractions to enable the gains promised by 3D technologies., Comment: 5 pages, 6 Figures, invited talk at S3S conference held in San Jose, October 2019

Standard cell libraries are the foundation for the entire backend design and optimization flow in modern application-specific integrated circuit designs. At 7nm technology node and beyond, standard cell library design and optimization is becoming increasingly difficult due to extremely complex design constraints, as described in the ASAP7 process design kit (PDK). Notable complexities include discrete transistor sizing due to FinFETs, complicated design rules from lithography and restrictive layout space from modern standard cell architectures. The design methodology presented in this paper enables efficient and high-quality standard cell library design and optimization with the ASAP7 PDK. The key techniques include exhaustive transistor sizing for cell timing optimization, transistor placement with generalized Euler paths and back-end design prototyping for library-level explorations., Comment: 6 papes, ICCAD 2017