Search

High-quality III-V narrow bandgap semiconductor materials with strong spin-orbit coupling and large Landé g-factor provide a promising platform for next-generation applications in the field of high-speed electronics, spintronics, and quantum computing. Indium antimonide (InSb) offers a narrow bandgap, high carrier mobility, and small effective mass and, thus, is very appealing in this context. In fact, this material has attracted tremendous attention in recent years for the implementation of topological superconducting states supporting Majorana zero modes. However, high-quality heteroepitaxial two-dimensional (2D) InSb layers are very difficult to realize owing to the large lattice mismatch with all commonly available semiconductor substrates. An alternative pathway is the growth of free-standing single-crystalline 2D InSb nanostructures, the so-called nanoflags. Here, we demonstrate fabrication of ballistic Josephson-junction devices based on InSb nanoflags with Ti/Nb contacts that show a gate-tunable proximity-induced supercurrent up to 50 nA at 250 mK and a sizable excess current. The devices show clear signatures of subharmonic gap structures, indicating phase-coherent transport in the junction and a high transparency of the interfaces. This places InSb nanoflags in the spotlight as a versatile and convenient 2D platform for advanced quantum technologies.

A most fundamental goal in spintronics is to electrically tune highly efficient spin injectors and detectors, preferably compatible with nanoscale electronics and superconducting elements. These functionalities can be obtained using semiconductor quantum dots, spin-polarized by a ferromagnetic split-gate, which we demonstrate in a double quantum dot spin valve with two weakly coupled quantum dots in series, with individual split gates magnetized in parallel or anti-parallel. In tunneling magnetoresistance experiments we find a strongly reduced spin valve conductance for the two anti-parallel configurations, with a single dot polarization of ~27%. This value can be significantly improved by a small external magnetic field and optimized gate voltages, which results in a continuously electrically tunable quantum dot spin polarization of ±80%. Such versatile quantum dot spin filters are compatible with superconducting electronic elements and suitable for single spin projection and correlation experiments, as well as initialization and read-out of spin qubits.

In the emerging interdisciplinary field of iontronics, ionic motion and arrangement in electrolyte media are exploited to control the properties and functionalities of electronic devices. This approach encompasses a wide range of applications across engineering and physical sciences including solid-state physics, electronics and energy storage. We briefly discuss the use of approaches and techniques characteristic of iontronics in nanoscale devices based on III-V semiconductor nanostructures, a versatile and promising platform for nanoscience and nanotechnology applications. Then, we report and discuss the operation of InAs nanowire-based electrolyte-gated transistors implemented using ionic liquids. We show that the ionic liquid gating outperforms the conventional solid-state back gate, and we compare the current modulation achieved in the same InAs NW using the ionic liquid gate or the back-gate. Finally, we highlight the capability of the liquid electrolyte to drastically change the resistance dependence on temperature in the nanowire. Our results suggest promising strategies toward the advanced field effect control of innovative III-V semiconductor nanowire-based devices for information and communication technologies at large.In the emerging interdisciplinary field of iontronics, ionic motion and arrangement in electrolyte media are exploited to control the properties and functionalities of electronic devices. This approach encompasses a wide range of applications across engineering and physical sciences including solid-state physics, electronics and energy storage. We briefly discuss the use of approaches and techniques characteristic of iontronics in nanoscale devices based on III-V semiconductor nanostructures, a versatile and promising platform for nanoscience and nanotechnology applications. Then, we report and discuss the operation of InAs nanowire-based electrolyte-gated transistors implemented using ionic liquids. We show that the ionic liquid gating outperforms the conventional solid-state back gate, and we compare the current modulation achieved in the same InAs NW using the ionic liquid gate or the back-gate. Finally, we highlight the capability of the liquid electrolyte to drastically change the resistance dependen...

We fabricate dual-gated electric double layer (EDL) field effect transistors based on InAs nanowires gated with an ionic liquid, and we perform electrical transport measurements in the temperature range from room temperature to 4.2 K. By adjusting the spatial distribution of ions inside the ionic liquid employed as gate dielectric, we electrostatically induce doping in the nanostructures under analysis. We extract low-temperature carrier concentration and mobility in very different doping regimes from the analysis of current-voltage characteristics and transconductances measured exploiting global back-gating. In the liquid gate voltage interval from -2 to 2 V, carrier concentration can be enhanced up to two orders of magnitude. Meanwhile, the effect of the ionic accumulation on the nanowire surface turns out to be detrimental to the electron mobility of the semiconductor nanostructure: The electron mobility is quenched irrespectively to the sign of the accumulated ionic species. The reported results shine light on the effective impact on crucial transport parameters of EDL gating in semiconductor nanodevices and they should be considered when designing experiments in which electrostatic doping of semiconductor nanostructures via electrolyte gating is involved. We fabricate dual-gated electric double layer (EDL) field effect transistors based on InAs nanowires gated with an ionic liquid, and we perform electrical transport measurements in the temperature range from room temperature to 4.2 K. By adjusting the spatial distribution of ions inside the ionic liquid employed as gate dielectric, we electrostatically induce doping in the nanostructures under analysis. We extract low-temperature carrier concentration and mobility in very different doping regimes from the analysis of current-voltage characteristics and transconductances measured exploiting global back-gating. In the liquid gate voltage interval from -2 to 2 V, carrier concentration can be enhanced up to two orders of magnitude. Meanwhile, the effect of the ionic accumulation on the nanowire surface turns out to be detrimental to the electron mobility of the semiconductor nanostructure: The electron mobility is quenched irrespectively to the sign of the accumulated ionic species. The reported results shine light on the effective impact on crucial transport parameters of EDL gating in semiconductor nanodevices and they should be considered when designing experiments in which electrostatic doping of semiconductor nanostructures via electrolyte gating is involved.

Research interest in indium antimonide (InSb) has increased significantly in recent years owing to its intrinsic properties and the consequent opportunities to implement next-generation quantum devices. Hence, the precise, reproducible control over morphology and crystalline quality becomes of paramount importance for a practical quantum-device technology. Here, we investigate the growth of InSb nanostructures with different morphologies on InAs stems without pre-growth efforts (patterning). InSb nanostructures such as nanowires (1D), nanoflags (2D) and nanocubes (3D) have been realized by means of Au-assisted chemical beam epitaxy by tailoring the growth parameters like growth temperature, precursor fluxes, sample rotation and substrate orientation. Through morphological and crystallographic characterization, all the as-grown InSb 2D nanostructures are found to be single-crystalline with zinc blende structure, free from any defects such as stacking faults and twin planes. The existence of two families of 2D nanostructures, characterised by an aperture angle at the base of 145 and 160 , is observed and modelled. This study provides useful guidelines for the controlled growth of high-quality InSb nanostructures with different shape. Research interest in indium antimonide (InSb) has increased significantly in recent years owing to its intrinsic properties and the consequent opportunities to implement next-generation quantum devices. Hence, the precise, reproducible control over morphology and crystalline quality becomes of paramount importance for a practical quantum-device technology. Here, we investigate the growth of InSb nanostructures with different morphologies on InAs stems without pre-growth efforts (patterning). InSb nanostructures such as nanowires (1D), nanoflags (2D) and nanocubes (3D) have been realized by means of Au-assisted chemical beam epitaxy by tailoring the growth parameters like growth temperature, precursor fluxes, sample rotation and substrate orientation. Through morphological and crystallographic characterization, all the as-grown InSb 2D nanostructures are found to be single-crystalline with zinc blende structure, free from any defects such as stacking faults and twin planes. The existence of two families of 2D nanostructures, characterised by an aperture angle at the base of 145 and 160 , is observed and modelled. This study provides useful guidelines for the controlled growth of high-quality InSb nanostructures with different shape.

We investigate the tunnel coupling between the outer p-type GaAsSb shell and the n-type InAs core in catalyst-free InAs/InP/GaAsSb core-dualshell nanowires. We present a device fabrication protocol based on wet-etching processes on selected areas of the nanostructures that enables multiple configurations of measurements in the same nanowire-based device (i.e. shell-shell, core-core and core-shell). Low-temperature (4.2 K) transport in the shell-shell configuration in nanowires with 5 nm-thick InP barrier reveals a weak negative differential resistance. Differently, when the InP barrier thickness is increased to 10 nm, this negative differential resistance is fully quenched. The electrical resistance between the InAs core and the GaAsSb shell, measured in core-shell configuration, is significantly higher with respect to the resistance of the InAs core and of the GaAsSb shell. The field effect, applied via a back-gate, has an opposite impact on the electrical transport in the core and in the shell portions. Our results show that electron and hole free carriers populate the InAs and GaAsSb regions respectively and indicate InAs/InP/GaAsSb core-dualshell nanowires as an ideal system for the investigation of the physics of interacting electrons and holes at the nanoscale. [Figure not available: see fulltext.].

In this work, we isolate individual wurtzite InAs nanowires and fabricate electrical contacts at both ends, exploiting the single nanostructures as building blocks to realize two different architectures of conductometric sensors: (a) the nanowire is drop-casted onto&mdash, supported by&mdash, a SiO2/Si substrate, and (b) the nanowire is suspended at approximately 250 nm from the substrate. We test the source-drain current upon changes in the concentration of humidity, ethanol, and NO2, using synthetic air as a gas carrier, moving a step forward towards mimicking operational environmental conditions. The supported architecture shows higher response in the mid humidity range (50% relative humidity), with shorter response and recovery times and lower detection limit with respect to the suspended nanowire. These experimental pieces of evidence indicate a minor role of the InAs/SiO2 contact area, hence, there is no need for suspended nanostructures to improve the sensing performance. Moreover, the sensing capability of single InAs nanowires for detection of NO2 and ethanol in the ambient atmosphere is reported and discussed.

We demonstrate high-temperature thermoelectric conversion in InAs/InP nanowire quantum dots by taking advantage of their strong electronic confinement. The electrical conductance G and the thermopower S are obtained from charge transport measurements and accurately reproduced with a theoretical model accounting for the multi-level structure of the quantum dot. Notably, our analysis does not rely on the estimate of co-tunnelling contributions since electronic thermal transport is dominated by multi-level heat transport. By taking into account two spin-degenerate energy levels we are able to evaluate the electronic thermal conductance K and investigate the evolution of the electronic figure of merit ZT as a function of the quantum dot configuration and demonstrate ZT ~ 35 at 30 K, corresponding to an electronic effciency at maximum power close to the Curzon- Ahlborn limit., 7 pages, 4 figures

InP-InAs-InP multi-shell nanowires (NWs) were grown in the wurtzite (WZ) or zincblende (ZB) crystal phase and their photoluminescence (PL) properties were investigated at low temperature (?6 K) for different measurement geometries. PL emissions from the NWs were carefully studied in a wide energy range from 0.7 to 1.6 eV. The different features observed in the PL spectra for increasing energies are attributed to four distinct emitting domains of these nano-heterostructures: the InAs island (axially grown), the thin InAs capping shell (radially grown), the crystal-phase quantum disks arising from the coexistence of InP ZB and WZ segments in the same NW, and the InP portions of the NW. These results provide a useful frame for the rational implementation of InP-InAs-InP multi-shell NWs containing various quantum confined domains as polychromatic optically active components in nanodevices for quantum information and communication technologies.

We report results on the control of barrier transparency in InAs/InP nanowire quantum dots via the electrostatic control of the device electron states. Recent works demonstrated that barrier transparency in this class of devices displays a general trend just depending on the total orbital energy of the trapped electrons. We show that a qualitatively different regime is observed at relatively low filling numbers, where tunneling rates are rather controlled by the axial configuration of the electron orbital. Transmission rates versus filling are further modified by acting on the radial configuration of the orbitals by means of electrostatic gating, and the barrier transparency for the various orbitals is found to evolve as expected from numerical simulations. The possibility to exploit this mechanism to achieve a controlled continuous tuning of the tunneling rate of an individual Coulomb blockade resonance is discussed., Comment: 7 pages, 5 figures, plus SI

Crystal-phase low-dimensional structures offer great potential for the implementation of photonic devices of interest for quantum information processing. In this context, unveiling the fundamental parameters of the crystal phase structure is of much relevance for several applications. Here, we report on the anisotropy of the g-factor tensor and diamagnetic coefficient in wurtzite/zincblende (WZ/ZB) crystal-phase quantum dots (QDs) realized in single InP nanowires. The WZ and ZB alternating axial sections in the NWs are identified by high-angle annular dark-field scanning transmission electron microscopy. The electron (hole) g-factor tensor and the exciton diamagnetic coefficients in WZ/ZB crystal-phase QDs are determined through micro-photoluminescence measurements at low temperature (4.2 K) with different magnetic field configurations, and rationalized by invoking the spin-correlated orbital current model. Our work provides key parameters for band gap engineering and spin states control in crystal-phase low-dimensional structures in nanowires., 10 pages, 5 figures

[EN] A semiconductor nanowire with strong spin-orbit coupling in proximity to a superconductor is predicted to display Majorana edge states emerging under a properly oriented magnetic field. The experimental investigation of these exotic states requires assessing the one-dimensional (1D) character of the nanowire and understanding the superconducting proximity effect in the presence of a magnetic field. Here, we explore the quasi-ballistic 1D transport regime of an InAs nanowire with Ta contacts. Fine-tuned by means of local gates, the observed plateaus of approximately quantized conductance hide the presence of a localized electron, giving rise to a lurking Coulomb blockade effect and Kondo physics. When Ta becomes superconducting, this local charge causes an unusual, reentrant magnetic field dependence of the supercurrent, which we ascribe to a 0 - p transition. Our results underline the relevant role of unintentional charge localization in the few-channel regime where helical subbands and Majorana quasi-particles are expected to arise., We acknowledge financial support from the Agence Nationale de la Recherche (TOPONANO project) and from the EU (ERC grant no. 280043). R.A. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (grant FIS2015-64654-P). R.Ž. acknowledges support from the Slovenian Research Agency (ARRS) under Program P1-0044 and J1-7259.

We demonstrate tunable bistability and a strong negative differential resistance in InAs/GaSb core-shell nanowire devices embedding a radial broken-gap heterojunction. Nanostructures have been grown using a catalyst-free synthesis on a Si substrate. Current-voltage characteristics display a top peak-to-valley ratio of 4.8 at 4.2 K and 2.2 at room temperature. The Esaki effect can be modulated - or even completely quenched - by field effect, by controlling the band bending profile along the azimuthal angle of the radial heterostructure. Hysteretic behavior is also observed in the presence of a suitable resistive load. Our results indicate that high-quality broken-gap devices can be obtained using Au-free growth.

We report on the nucleation and growth mechanism of self-catalyzed InAs nanowires (NWs) grown on Si (111) substrates by chemical beam epitaxy. Careful choices of the growth parameters lead to In-rich conditions such that the InAs NWs nucleate from an In droplet and grow by the vapor-liquid-solid mechanism while sustaining an In droplet at the tip. As the growth progresses, new NWs continue to nucleate on the Si (111) surface causing a spread in the NW size distribution. The observed behavior in NW nucleation and growth is described within a suitable existing theoretical model allowing us to extract relevant growth parameters. We argue that these results provide useful guidelines to rationally control the growth of self-catalyzed InAs NWs for various applications.

We report on the heterogeneous nucleation of catalyst-free InAs nanowires on Si (111) substrates by chemical beam epitaxy. We show that nanowire nucleation is enhanced by sputtering the silicon substrate with energetic particles. We argue that particle bombardment introduces lattice defects on the silicon surface that serve as preferential nucleation sites. The formation of these nucleation sites can be controlled by the sputtering parameters, allowing the control of nanowire density in a wide range. Nanowire nucleation is accompanied by unwanted parasitic islands, but by careful choice of annealing and growth temperature allows to strongly reduce the relative density of these islands and to realize samples with high nanowire yield.

We present experimental data on the length distributions of InAs nanowires grown by chemical beam epitaxy with Au catalyst nanoparticles obtained by thermal dewetting of Au film, Au colloidal nanoparticles and In droplets. Poissonian length distributions are observed in the first case. Au colloidal nanoparticles produce broader and asymmetric length distributions of InAs nanowires. However, the distributions can be strongly narrowed by removing the high temperature annealing step. The length distributions for the In-catalyzed growth are instead very broad. We develop a generic model that is capable of describing the observed behaviors by accounting for both the incubation time for nanowire growth and secondary nucleation of In droplets. These results allow us to formulate some general recipes for obtaining more uniform length distributions of III-V nanowires.

III-V semiconductor nanowires have attracted intensive research interest because of their promising optical and electronic properties that can be manipulated by tailoring nanowire composition and morphology. Therefore, it is crucial to measure and control the diameter distribution of the grown nanowires. In this study, we analyze the diameter distribution of Au-catalyzed InAs nanowires. Au colloidal nanoparticles dispersed on InAs (111) B substrates and nanoparticles obtained by the thermal annealing of Au films were used as catalysts for InAs nanowire growth. The annealing time and temperature, the thickness of the Au film and the colloid sizes were systematically varied not only to understand their influence on nanowire diameter distribution, but also to find the optimal parameters for realizing samples with uniform and controlled diameter distribution. Morphological characterization was performed by scanning electron microscopy measurements and the image analysis was carried out using in-house-developed automated image analysis software to accurately determine the diameter distribution of the nanowires. A description of the image analysis software is also presented. The thermal annealing of films turned out to be the most suitable method for uniformity and density control, while the colloidal nanoparticles yielded narrow and more reproducible diameter distributions.