Search

The number and location of switching devices (e.g., circuit breakers and sectionalizers) should be optimally determined in power distribution systems to reduce system interruptions and associated costs. However, existing mathematical optimization algorithms, such as classic and metaheuristic methods, cannot solve the optimal switch placement problem for large-scale systems. In this paper, a scalable model is proposed based on machine learning methods to determine the optimal number and location of switching devices according to system conditions. This paper proposes employing ensemble learning methods and explainable artificial intelligence tools to build an accurate data-driven model. Consequently, power distribution operators can determine the optimal number and location of circuit breakers, remote-controlled sectionalizers, and manual switches in large-scale systems without mathematical optimization algorithms. To validate its accuracy and scalability, the proposed model and a classic-based model are implemented on a real power distribution system in Fars province. The numerical results demonstrate that the proposed data-driven model can find a solution close to the globally optimal solution quickly, using a limited range of system data. [ABSTRACT FROM AUTHOR]

Testing the operation of protection devices against parallel arc breakdown and spark gaps in the event of a ground faultTHE PURPOSE. Develop a laboratory rig for testing parallel arc fault and spark gap protection devices for tripping in the event of a ground fault. Conduct laboratory rig tests with subsequent development of requirements for the use of parallel arc fault and spark gap protection devices for tripping in the event of a ground fault.METHODS. Mathematical and statistical methods of analysis were used to achieve the stated objective. Laboratory tests of parallel arc fault and spark gap protection devices for different network parameters for correct tripping in the event of a ground fault.RESULTS. Laboratory tests of parallel arc fault and spark gap protection devices for correct tripping in the event of a ground fault were conducted with different network parameters. The oscilloscope recorded the shape of the voltage and current curve in the event of a ground fault and the tripping time of the devices. The tested devices demonstrated the ability to recognize and disconnect a ground fault. The tripping time of the devices varies, however, does not exceed the established requirements.CONCLUSION. A laboratory stand has been developed for testing parallel arc breakdown and spark gap protection devices for operation during a ground fault. This stand makes it possible to test devices for adequate operation during a ground fault with subsequent certification. The tests conducted demonstrate the need to develop mandatory requirements for the device to standardize their operating algorithm. Therefore, the use of this protection device can contribute to safer operation of low-voltage electrical networks by preventing emergency situations and reducing the risk of fires. This is an important technical aspect for improving the reliability and safety of power supply.

Using data from the 2022 Korea Community Health Survey (n  = 13 320), this study investigated helmet use and related factors among Korean adults using personal mobility devices, without distinguishing between private and hired users. Among mobility device users, 32.1% responded that they always wore a helmet. The proportion of helmet use was 35.2% among men, 25.8% among women, 29.2% among those aged 19–44 years, 42.3% among those aged 45–64 years and 26.6% among those aged 65 years or older. Furthermore, those who drank less frequently and were physically active were more likely to wear helmets. Moreover, people who always wore a seat belt when driving a car or sitting in the rear seat and people who always wore a helmet when riding a motorcycle were more likely to wear a helmet while using electric personal mobility devices. Approximately one-third of users always wore a helmet. The helmet-wearing rate was related to general characteristics such as gender and education level, and to safety behaviors such as wearing a seat belt when driving a car, sitting in the rear seat of a car, or when riding a motorcycle. In addition to considering personal characteristics investigated in this study, the helmet-wearing rate should be improved through policies or systems at the national or regional levels. [ABSTRACT FROM AUTHOR]

BACKGROUND: Delirium is a deleterious condition affecting up to 60% of patients in the surgical ICU (SICU). Few SICU-focused delirium interventions have been implemented, including those addressing sleep-wake disruption, a modifiable delirium risk factor common in critically ill patients. RESEARCH QUESTION: What is the effect on delirium and sleep quality of a multicomponent nonpharmacologic intervention aimed at improving sleep-wake disruption in patients in the SICU setting? STUDY DESIGN AND METHODS: Using a staggered pre-post design, we implemented a quality improvement intervention in two SICUs (general surgery or trauma and cardiovascular) in an academic medical center. After a preintervention (baseline) period, a multicomponent unit-wide nighttime (ie, efforts to minimize unnecessary sound and light, provision of earplugs and eye masks) and daytime (ie, raising blinds, promotion of physical activity) intervention bundle was implemented. A daily checklist was used to prompt staff to complete intervention bundle elements. Delirium was evaluated twice daily using the Confusion Assessment Method for the Intensive Care Unit. Patient sleep quality ratings were evaluated daily using the Richards-Campbell Sleep Questionnaire (RCSQ). RESULTS: Six hundred forty-six SICU admissions (332 baseline, 314 intervention) were analyzed. Median age was 61 years (interquartile range, 49-70 years); 35% of the cohort were women and 83% were White. During the intervention period, patients experienced fewer days of delirium (proportion ± SD of ICU days, 15 ± 27%) as compared with the preintervention period (20 ± 31%; P = .022), with an adjusted pre-post decrease of 4.9% (95% CI, 0.5%-9.2%; P = .03). Overall RCSQ-perceived sleep quality ratings did not change, but the RCSQ noise subscore increased (9.5% [95% CI, 1.1%-17.5%; P = .02). INTERPRETATION: Our multicomponent intervention was associated with a significant reduction in the proportion of days patients experienced delirium, reinforcing the feasibility and effectiveness of a nonpharmacologic sleep-wake bundle to reduce delirium in critically ill patients in the SICU. TRIAL REGISTRY: ClinicalTrials.gov; No.: NCT03313115; URL: www.clinicaltrials.gov.

This study was conducted to quantitatively examine the effects of respiratory protective equipment (respirators) and various other types of protectors in preventing the scattering of vocalization droplets. Each of 12 adult male volunteers was asked to vocalize intermittently for 1 min at a target intensity of approximately 100 dBA in an experimental room adjusted to a humidity of approximately 60–70%. The subjects vocalized while wearing respirators, other types of protectors, or no protectors at all. The droplet concentration in a particle size range of 0.3 to 10 μm was measured under each experimental condition, and the transmitted particle concentration and penetration were calculated. The concentration and penetration of particles transmitted from the respirators were lower than those transmitted from the other protectors examined. The probability of infection reduction through the use of the protectors was estimated from the data obtained on the effectiveness of the protectors in preventing the scattering of droplets. We concluded that there is no need for additional droplet scattering prevention in various work settings when appropriate respirators are used under optimal conditions. [ABSTRACT FROM AUTHOR]

BACKGROUND: Fire extinguishing operations are carried out by firefighters equipped with personal protective equipment (PPE) in dangerous environments. Although PPE protects firefighters, it can affect many physiological parameters. OBJECTIVE: This study aimed to investigate the effects of PPE on firefighters' heart rate (HR), oxygen consumption (OC) and body temperature (BT). METHODS: This systematic review thoroughly reviewed relevant articles in the reliable databases "Web of Science", "Embase", "IranDoc", "IranMedex", "SID", "Magiran", "Google Scholar", "PubMed" and "Scopus" from 2010 to 2021. Some of the used search terms were "firefighters", "personal protective equipment", "heart rate" and "oxygen consumption". RESULTS: Out of the 405 studies identified through the systematic search, 18 articles were eligible according to the Joanna Briggs Institute (JBI) checklist, among which 11 studies were conducted in North America, three in Asia, two in Europe, and two studies in Oceania. According to the review of studies, PPE increased HR, BT, and OC. The type of PPE components, the weight of the equipment, the kind of activity of firefighters, and weather conditions were among the influencing parameters on the extent of PPE's influence on these physiological parameters. CONCLUSION: The results of the studies show that PPE separately and collectively affects the physiological parameters of HR, BT and OC. To reduce these effects, it is necessary to pay attention to several items, including the weight of PPE, the type of PPE ingredients in different weather conditions, and the type of activities of firefighters in PPE design. [ABSTRACT FROM AUTHOR]

Copyright of Die Unfallchirurgie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

(1) Background: The perception of others’ emotions based on non-verbal cues, such as facial expressions, is fundamental for interpersonal communication and mutual support. Using personal protection equipment (PPE) in a work environment during the SAR-CoV-2 pandemic challenged health professionals’ ability to recognise emotions and expressions while wearing PPE. The working hypothesis of this study was that the increased limitation of facial visibility, due to the use of a personal protective device, would interfere with the perception of basic emotions in the participants. (2) Methods: Through a cross-sectional descriptive study, the present research aimed to analyse the identification of four basic emotions (happiness; sadness; fear/surprise; and disgust/anger) through three types of PPE (FFP2 respirator, protective overall and powered air-purifying respirator (PAPR)), by using 32 photographs. The study was conducted using volunteer participants who met the inclusion criteria (individuals older than 13 without cognitive limitations). Participants had to recognise the emotions of actors in photographs that were randomly displayed in an online form. (3) Results: In general, the 690 participants better recognised happiness and fear, independently of the PPE utilised. Women could better identify different emotions, along with university graduates and young and middle-aged adults. Emotional identification was at its worst when the participants wore protective overalls (5.42 ± 1.22), followed by the PAPR (5.83 ± 1.38); the best scores were obtained using the FFP2 masks (6.57 ± 1.20). Sadness was the least recognised emotion, regardless of age. (4) Conclusions: The personal protective devices interfere in the recognition of emotions, with the protective overalls having the greatest impact, and the FFP2 mask the least. The emotions that were best recognised were happiness and fear/surprise, while the least recognised emotion was sadness. Women were better at identifying emotions, as well as participants with higher education, and young and middle-aged adults.

Objectives: Dental professionals are exposed to large amounts of dust particles during routine treatment and denture processing. This article provides a narrative review to investigate the most prevalent dust-related respiratory diseases among dental professionals and to discuss the effects of dental dust on human respiratory health. Materials and methods: A literature search was performed in PubMed/Medline, Web of Science, and Embase for articles published between 1990 and 2022. Any articles on the occupational respiratory health effects of dental dust were included. Results: The characterization and toxicity evaluation of dental dust show a correlation between dust exposure and respiratory system injury, and the possible pathogenic mechanism of dust is to cause lung injury and abnormal repair processes. The combination use of personal protective equipment and particle removal devices can effectively reduce the adverse health effects of dust exposure. Conclusions: Dental dust should be considered an additional occupational hazard in dental practice. However, clinical data and scientific evidence on this topic are still scarce. Further research is required to quantify dust in the dental work environment and clarify its pathogenicity and potential toxicological pathways. Nonetheless, the prevention of dust exposure should become a consensus among dental practitioners. Clinical relevance: This review provides dental practitioners with a comprehensive understanding and preventive advice on respiratory health problems associated with dust exposure. [ABSTRACT FROM AUTHOR]

Introduction: The potential for significant traumatic injury to individuals who interact with horses remains high due to animal size, forces applied, and unpredictability. Despite an estimated 30 million riders in the United States annually, few recent publications have addressed this patient population. Objectives: This study describes characteristics of patients injured in interactions with horses, focusing on mechanism of injury and use of protective equipment. Methods: We queried our institution's trauma registry for all patients admitted for equine-related injuries (ERI) between January 1, 2013 and December 31, 2017. We categorized by specific mechanism of injury (fall, crush, kick, fall + crush, and fall + kick) and presence or absence of protective devices. Results: We discovered 143 patients admitted for injuries in equine-related accidents. Patients averaged 49.2 years old, and 62.2% were female. Crush injuries resulted in a high rate of rib fractures. Riders who were kicked had an increased chance of solid organ and facial injuries and falls most commonly led to rib fractures and extremity trauma. Despite lack of documentation on most subjects, protective devices were associated with less severe injuries in those with data (n = 36). Conclusions: In this relatively large series of patients with ERI, we found mechanism differences within injury groups. Providers should more carefully document specific circumstances of ERIs. All individuals working with or around horses should exercise prudence and consider using protective equipment. [ABSTRACT FROM AUTHOR]

Industries widely use three-phase inductive loads, such as induction motors, due to their cost-effectiveness, low maintenance, reliability, and durability. However, these loads decrease the power factor, which leads to power wastage, higher billing costs, and penalties from electric power supply companies. To address this issue, a system has been developed that employs a programmable logic controller (PLC) to enhance the power factor of three-phase loads, which reduces the plant's operating costs and lessens the demand for electricity supply from the utility side. The system combines hardware and software components. The software includes logic-based PLC programming that controls the sequence of operations step by step, whereas hardware consists of power and control circuits and protective devices. When an inductive load is added to the system, the PLC reads the input signal from the magnetic contactor's contactor coil connected with the motor and sends an output signal to the corresponding contactor coil of the magnetic contactor to switch the appropriate capacitor bank to enhance the power factor. This paper discusses the experimental results for seven cases utilizing different load combinations with and without the developed system. Thus, energy management requires improving the load's power factor, and the PLC is used as a power factor controller (PFC) for many industrial control applications.

Objective: To describe the working conditions, illness and nursing coping in the COVID-19 pandemic in a Brazilian capital. Methods: This is a descriptive, cross-sectional study with a quantitative approach. Data were collected between August and September 2021, online. The analysis was performed using BioEstat 5.0, with descriptive and analytical statistical techniques from Pearson's chi-square test and Fisher's exact test, with the Odds Ratio being adequate for the variables in which there was a linked association. Results: Of the 121 study participants, 106 were female and more than 50% had two jobs. 102 professionals reported salaries earned due to the complexity of the work performed and 46 indicated precarious conditions for professional practice. A statistical association was found regarding the guidelines on how to inspect with masks N95 / PFF2 or equivalent (p = 0.017; OR = 0.31; 95% CI = 0.13-0.77) and the relative variable of professionals who are already associated students of COVID-19 and/or had a confirmed diagnosis (p = 0.047; OR = 0.43; 95% CI = 0.20-0.93). Conclusion: This study points to the need for better organization and working conditions in health services so that nursing professionals must provide quality care. [ABSTRACT FROM AUTHOR]

(1) Background: The perception of others' emotions based on non-verbal cues, such as facial expressions, is fundamental for interpersonal communication and mutual support. Using personal protection equipment (PPE) in a work environment during the SAR-CoV-2 pandemic challenged health professionals' ability to recognise emotions and expressions while wearing PPE. The working hypothesis of this study was that the increased limitation of facial visibility, due to the use of a personal protective device, would interfere with the perception of basic emotions in the participants. (2) Methods: Through a cross-sectional descriptive study, the present research aimed to analyse the identification of four basic emotions (happiness; sadness; fear/surprise; and disgust/anger) through three types of PPE (FFP2 respirator, protective overall and powered air-purifying respirator (PAPR)), by using 32 photographs. The study was conducted using volunteer participants who met the inclusion criteria (individuals older than 13 without cognitive limitations). Participants had to recognise the emotions of actors in photographs that were randomly displayed in an online form. (3) Results: In general, the 690 participants better recognised happiness and fear, independently of the PPE utilised. Women could better identify different emotions, along with university graduates and young and middle-aged adults. Emotional identification was at its worst when the participants wore protective overalls (5.42 ± 1.22), followed by the PAPR (5.83 ± 1.38); the best scores were obtained using the FFP2 masks (6.57 ± 1.20). Sadness was the least recognised emotion, regardless of age. (4) Conclusions: The personal protective devices interfere in the recognition of emotions, with the protective overalls having the greatest impact, and the FFP2 mask the least. The emotions that were best recognised were happiness and fear/surprise, while the least recognised emotion was sadness. Women were better at identifying emotions, as well as participants with higher education, and young and middle-aged adults. [ABSTRACT FROM AUTHOR]

Objectives This study introduced a novel Automatic Needle Destroyer (AND) to an emergency department (ED) and assessed its effect on healthcare providers’ work. Methods Between August and September 2019, in the ED of a tertiary hospital in Seoul, we conducted a mixed-methods study to evaluate the efficiency, safety, and usability of the AND using video analysis, surveys, and in-depth interviews, wherein participants described the advantages and disadvantages of the AND. Results Compared to the existing method, introducing the AND significantly reduced the operating time from 2.32 ± 1.14 seconds to 1.77 ± 3.71 seconds (p < 0.001). The normal operation rate was 90.6%. The rate of needle-stick injuries (NSIs) and the mean system usability scale (SUS) showed no significant differences. The in-depth interviews indicated that the disadvantages of the AND were mostly operational. The advantages were related to profit, reduced direct contact with hazardous waste, and behavioral changes, such as not having to recap syringes. Conclusions We introduced the AND to an ED environment, where NSIs occur frequently and many syringes are used, to evaluate its effect on providers’ work. The AND reduced the time for needle disposal, but the normal operation rate was low. No significant differences were found in the SUS score or the rate of NSIs. Although there are some restrictions on introducing the AND immediately, this study’s results showed its potential usefulness. Efforts to improve the operation of the device and a longer study period are needed to fully achieve safety and efficiency.

Objective: Collisions with obstacles are among the most severe accidents recorded in ski areas. In France, the padding placed on these obstacles conforms to a design standard to assess its ability to dissipate energy when impacted by a skier/snowboarder. Padding performance, i.e. its ability to prevent or mitigate injuries and the changes in performance over time remain poorly understood. Considering the global objective to explore the padding's ability to protect from injuries during its cycle of use, a large experimental campaign was designed to investigate various padding performance. Design: Experimental drop tests were performed on padding in ski areas using instrumented head and trunk impactors. Method: The influences of the padding's properties (thickness, age, impact location, cover), environment (temperature, position on the obstacle) and impact conditions (speed, impactor) on head and chest accelerations were investigated. 180 drop tests were performed on 40 padding samples (with thicknesses ranging from 10 ​cm to 30 ​cm) with ages varying from 0 to 17 years old. Results: This study showed a significant influence of speed, impactor and the padding's thickness (P ​

Introduction The prolonged or incorrect use of facial masks, respirators and glasses or visors results in friction, pressure and shear forces that constantly act on the facial skin, leading to lesions and dermatitis. Objective To develop and validate algorithms to guide health professionals in the correct use of personal protective equipment (PPE) and indicate preventive measures against skin injuries caused by inappropriate use during the COVID-19 pandemic. Methods For the develoment of the algorithms, an integrative literature review was performed using the following databases: PubMed, SciELO, and LILACS. The algorithms were evaluated by 59 health professionals (nurses, doctors, and physiotherapists), using the Delphi technique. A content validity index (CVI) was used for the statistical analysis. Results The experts classified the items of the algorithms from fully inadequate to fully adequate in the first round of consultations, and from partially adequate to fully adequate in the second round. The overall CVI values were of 0.83 and 1.0 in the first and second rounds respectively. Conclusion The algorithms validated by the expert panel can be used by health professionals when donning and doffing PPE, and to prevent the facial-skin lesions caused by their use.

Abstract Patient contact shielding has been in use for many years in radiology departments in order to reduce the effects and risks of ionising radiation on certain organs. New technologies in projection imaging and CT scanning such as digital receptors and automatic exposure control systems have reduced doses and improved image consistency. These changes and a greater understanding of both the benefits and the risks from the use of shielding have led to a review of shielding use in radiology. A number of professional bodies have already issued guidance in this regard. This paper represents the current consensus view of the main bodies involved in radiation safety and imaging in Europe: European Federation of Organisations for Medical Physics, European Federation of Radiographer Societies, European Society of Radiology, European Society of Paediatric Radiology, EuroSafe Imaging, European Radiation Dosimetry Group (EURADOS), and European Academy of DentoMaxilloFacial Radiology (EADMFR). It is based on the expert recommendations of the Gonad and Patient Shielding (GAPS) Group formed with the purpose of developing consensus in this area. The recommendations are intended to be clear and easy to use. They are intended as guidance, and they are developed using a multidisciplinary team approach. It is recognised that regulations, custom and practice vary widely on the use of patient shielding in Europe and it is hoped that these recommendations will inform a change management program that will benefit patients and staff.

Osteoporosis is characterized by loss of bone mineral density and increased fracture risk. Reduction of hip fracture incidence is of major clinical importance. Hip protectors aim to attenuate the impact force transmitted to the femur upon falling, however different conclusions on their efficacy have been reported; some authors suggest this may be due to differences in compliance. The aim of this study was to apply an In Silico trial methodology to predict the effectiveness of hip protectors and its dependence on compliance. A cohort of 1044 virtual patients (Finite Element models of proximal femur) were generated. A Markov chain process was implemented to predict fracture incidence with and without hip protectors, by simulating different levels of compliance. At each simulated follow-up year, a Poisson distribution was randomly sampled to determine the number of falls sustained by each patient. Impact direction and force were stochastically sampled from a range of possible scenarios. The effect of wearing a hip protector was simulated by applying attenuation coefficients to the impact force (12.9 %, 19 % and 33.8 %, as reported for available devices). A patient was considered fractured when impact force exceeded the femur strength. Without hip protector, virtual patients experienced 66 ± 5 fractures in 10 years. Wearing the three devices, fracture incidence was reduced to 43 ± 4, 35 ± 4 and 17 ± 2 respectively, at full compliance. As expected, effectiveness was dependent on compliance. This In Silico trial technology can be applied in the future to test multiple interventions, optimise intervention strategies, improve clinical trial design and drug development., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Background: Immobilization in the intensive care unit can lead to pressure injuries and plantar flexion contractures., Aim: This study was conducted to evaluate the effectiveness of heel protectors applied for the prevention of heel pressure injuries and plantar flexion contractures in intensive care units., Methods: This study was conducted as a randomized controlled trial in two adult intensive care units of a teaching and research hospital. The study sample consisted of 84 patients admitted to intensive care units between January 2022 and December 2022. Patients who had been in the intensive care unit for at least 5 days, scored 16 or less on the Braden Pressure Ulcer Risk Assessment Scale and scored 4 or more on the Ramsey Sedation Scale, were included in the study. Heel protector boots were applied to the heels of the patients in the intervention group, while standard positioning with a pillow and ROM exercises were continued in the control group. A sociodemographic data form, the Ramsey Sedation Scale and the Braden Pressure Ulcer Risk Assessment Scale were used to collect data. While pressure injuries were evaluated with the International NPUAP-EPUAP Pressure Ulcer Classification System, goniometric measurements were made to evaluate joint ROM., Results: In the intervention group, heel pressure injuries did not develop during the study, whereas five patients in the control group developed heel pressure injuries. The risk of pressure injury development that was seen in the control group was 1.7 times higher compared with the risk for the intervention group (log 95% CI: 0.91-2.59). There were significant differences between the right foot (99%; F = 99.229; p = .000) and left foot (99%; F = 100.519; p = .000) in range of motion measurement values of the patients in the intervention group according to the measurement times. According to the results of the multiple comparison test (Bonferroni) performed to determine the range of motion measurement periods showing significant differences, it was observed that each measurement for both feet yielded lower results than the previous measurement (seven measurements from day 1 to day 13)., Conclusion: The use of heel protector boots was found to be effective in preventing the development of heel pressure injuries and plantar flexion contractures in intensive care unit patients., Relevance for Clinical Practice: This study provides evidence that intensive care nurses can use heel protector boots to prevent the development of heel pressure injuries and plantar flexion contractures., (© 2024 The Authors. Nursing in Critical Care published by John Wiley & Sons Ltd on behalf of British Association of Critical Care Nurses.)

Mucosal ulcers are a common yet often overlooked complication during orthodontic treatment, significantly impacting patient comfort and compliance. This letter aims to highlight the prevalence, potential causes, and management strategies for mucosal ulcers in orthodontic patients. By reviewing recent literature and clinical observations, we underscore the necessity for proactive measures and tailored interventions to mitigate the incidence and severity of these lesions. Emphasizing the role of patient education and the use of protective devices, we call for a multidisciplinary approach to enhance patient care and treatment outcomes. This discussion is particularly relevant in the context of evolving orthodontic techniques and materials, which necessitate continuous adaptation of clinical practices to ensure patient safety and well-being., Competing Interests: Conflict-of-interest statement: All authors have no conflicts of interest to disclose., (©The Author(s) 2024. Published by Baishideng Publishing Group Inc. All rights reserved.)

Understanding the athlete's movements and the restrictions incurred by protective equipment is crucial for improving the equipment and subsequently, the athlete's performance. The task of equipment improvement is especially challenging in sports including advanced manoeuvres such as ice hockey and requires a holistic approach guiding the researcher's attention toward the right variables. The purposes of this study were (a) to quantify the effects of protective equipment in ice hockey on player's performance and (b) to identify the restrictions incurred by it. Twenty male hockey players performed four different drills with and without protective equipment while their performance was quantified. A neural network accompanied by layer-wise relevance propagation was applied to the 3D kinematic data to identify variables and time points that were most relevant for the neural network to distinguish between the equipment and no equipment condition, and therefore presumable result from restrictions incurred by the protective equipment. The study indicated that wearing the protective equipment, significantly reduced performance. Further, using the 3D kinematics, an artificial neural network could accurately distinguish between the movements performed with and without the equipment. The variables contributing the most to distinguishing between the equipment conditions were related to the upper extremities and movements in the sagittal plane. The presented methodology consisting of artificial neural networks and layer-wise relevance propagation contributed to insights without prior knowledge of how and to which extent joint angles are affected in complex maneuvers in ice hockey in the presence of protective equipment. It was shown that changes to the equipment should support the flexion movements of the knee and hip and should allow players to keep their upper extremities closer to the torso., Competing Interests: This work was funded by CCM Hockey (Montreal, Canada) and Biomechanigg Sport and Health Research (BSHR; Calgary, Canada). CCM Hockey also funded subject recruitment and data collection. However, the results presented in this article do not in any way represent a bias toward CCM products over other brands. The principal investigator, Dr. Benno Nigg, is also the Chief Science Officer of the sponsoring company BSHR. BSHR covered material costs for this research and was simply interested in the outcome of the study, regardless of the findings. The company BSHR did not benefit from the results of the findings. BSHR had no influence on the outcome of this study. The results of the study were presented clearly, honestly, and without fabrication, falsification, or inappropriate data manipulation. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. This does not alter our adherence to PLOS ONE policies on sharing data and materials., (Copyright: © 2024 Lennartz et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Numerous fire accidents have occurred in Japan owing to food overheating when cooking on gas stoves because users left the cooking area unattended. In response, authorities enacted a legal revision mandating temperature sensor installation on gas stove burners. Nevertheless, the actual effectiveness of this measure remains uncertain. Furthermore, prior studies have raised concerns about the efficacy of specific safety standards for consumer products owing to insufficient evidence of reduction in accidents. Consequently, this study seeks to assess the impact of the standards revision implemented in 2008, requiring the placement of safety devices on all gas stove burners. Through a comprehensive analysis, it was aimed to ascertain how these measures have precisely influenced safety outcomes in cooking-related incidents. The data in this study were subdivided to mitigate potential bias from user attributes during data collection. The analysis employed the difference-in-differences method, specifically utilizing one-burner gas stoves unaffected by the standards revision. The data used in this study include accidents associated with gas stoves, spanning the period 2007-2019. To estimate the likelihood of overheating accidents, a binomial distribution model that utilized the Markov chain Monte Carlo methods was applied. For gas stoves with two or more burners, which were affected by the standards revision, the estimated probability of overheating accidents decreased by approximately 80%. In contrast, no decreasing trend was observed for one-burner gas stoves. The analysis suggests that the mandatory installation of safety devices on gas stoves has indeed resulted in a significant reduction in overheating accidents., (© 2024 Society for Risk Analysis.)

Active wearable devices such as protective smart belts have been proposed to reduce hip impact in the event of a fall. This study primarily evaluated the feasibility and acceptance of a specific protective belt among selected patients identified as being at risk of falling who were admitted to an ICS Maugeri Neurorehabilitation Unit from September 2022 to April 2023. According to previous institutional observations, the device was worn between the 6th and 21st days of recovery. Out of 435 admitted patients, 118 were considered eligible, but 101 declined to participate (about 50% refused to wear the belt without first trying it on; the other 50% found it too heavy or difficult to manage). Among the 17 patients who accepted (users), 9 used the belt correctly. The remaining eight patients refused to wear it after 24 h, due to discomfort. Out of 435 patients admitted, we observed at least one fall in 49 patients, of whom 5 were eligible patients; 1 was a user who had quickly refused to use the belt and fell with mild damage. Two non-eligible patients and one eligible non-user patient experienced falls resulting in hip fractures; only in the latter case could the use of the belt have limited the damage to the hip. Difficulties in recruiting patients and low acceptance of the proposed intervention present further challenges., Competing Interests: The authors declare no conflicts of interest.

Background: There is a growing body of evidence indicating that second-degree tears cause both short- and long-term consequences. Very few preventative measures have been found to reduce the incidence of these tears., Objective: This study aimed to investigate whether the use of a perineal protection device during vaginal birth reduces severe perineal tearing (grade ≥2 tear) in primiparous women compared with routine manual perineal support., Study Design: A single-center randomized controlled trial was conducted in Sweden from 2019 to 2021. Primiparous women at term were randomly allocated to the intervention group (n=43), where a perineal protection device was used, or to the routine care group (n=49). The primary outcome was grade of perineal tear. The secondary outcomes were vaginal and labial tearing. Continuous data were analyzed using the Student t test or Mann-Whitney U test. Dichotomous data were analyzed using the Pearson X 2 test, Fisher exact test, and ordinal logistic regression., Results: Women in the intervention group had a significantly lower risk of sustaining more extensive perineal tearing than those in the control group. The use of the perineal protection device decreased the risk of grade ≥2 tears in relation to grade 0 to 1 tears (odds ratio, 0.40; 95% confidence interval, 0.17-0.94). Ordinal logistic regression analyses revealed an odds ratio of 0.36 (95% confidence interval, 0.16-0.81) per incremetn of grade injury using the perineal protection device vs routine care (P=.013). The number needed to treat using the perineal protection device was 4.3 to avoid 1 grade ≥2 tear. Women in the treatment group showed less labial tearing (P=.016). No adverse effect was detected., Conclusion: The use of a perineal protection device reduced the risk of grade ≥2 perineal tearing by 60% and labial tearing. El resumen está disponible en Español al final del artículo., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Objectives: To compare the performance of four N95 respirator types with respect to quantitative fit test pass rate and health care worker‐rated usability and comfort. Design, setting, participants: Health care workers who participated in the respiratory protection program at the Royal Melbourne Hospital, 1 October 2020 – 31 May 2021. Participants underwent quantitative N95 respirator fit testing (at least three of four types: semi‐rigid cup, flat‐fold cup, duckbill, and three‐panel flat‐fold types), and were invited to complete an online usability and comfort assessment for respirators for which their fit test results were passes. Main outcome measures: Fit test pass rate, and user‐rated overall comfort and assessment ratings (five‐point Likert scales), by N95 respirator type. Results: A total of 2161 health care workers underwent quantitative fit testing (women, 1586 [73.4%]; nurses, 1271 [58.8%]). The overall fit test pass rates were 65.0% for the semi‐rigid cup respirators (1029/1583 tests), 32.4% for the flat‐fold respirator (660/2035 tests), 59.2% for the duckbill respirators (2005/3387 tests), and 96.4% for the three‐panel flat‐fold respirator (1876/1946 tests). 378 health care workers completed the comfort and usability survey. Overall comfort and assessment ratings each differed by respirator group (P < 0.001); the median overall comfort (4; IQR, 3–4) and overall assessment values (4; IQR, 3–5) were highest for the three‐panel flat‐fold respirator and lowest for the semi‐rigid cup respirators (comfort: 2 [IQR, 1–3]; assessment: 2 [IQR, 2–3]). Conclusions: The three‐panel flat‐fold N95 respirator outperformed the three alternative types with regard to fit test pass rate and user‐rated comfort and usability. To maximise respiratory protection for health care workers, these factors should be considered when making respirator procurement decisions. [ABSTRACT FROM AUTHOR]

Patient contact shielding has been in use for many years in radiology departments in order to reduce the effects and risks of ionising radiation on certain organs. New technologies in projection imaging and CT scanning such as digital receptors and automatic exposure control (AEC) systems have reduced doses and improved image consistency. These changes and a greater understanding of both the benefits and the risks from the use of shielding have led to a review of shielding use in radiology. A number of professional bodies have already issued guidance in this regard. This paper represents the current consensus view of the main bodies involved in radiation safety and imaging in Europe: European Federation of Organisations for Medical Physics, European Federation of Radiographer Societies, European Society of Radiology, European Society of Paediatric Radiology, EuroSafe Imaging, European Radiation Dosimetry Group (EURADOS), and European Academy of DentoMaxilloFacial Radiology (EADMFR). It is based on the expert recommendations of the Gonad and Patient Shielding (GAPS) Group formed with the purpose of developing consensus in this area. The recommendations are intended to be clear and easy to use. They are intended as guidance, and they are developed using a multidisciplinary team approach. It is recognised that regulations, custom and practice vary widely on the use of patient shielding in Europe and it is hoped that these recommendations will inform a change management program that will benefit patients and staff. Patient summary [ABSTRACT FROM AUTHOR]

In the event of a fault isolation process, all loads located downstream from the faulted point become out of service, and as a consequence, the power interruption affects a greater portion of the radial distribution system. This paper proposes an optimal Service Restoration (SR) method that entails changing the network topology configuration via optimal tie-switch and section switch combinations. However, when the network topology configuration is performed, it results in increased load currents. As a result, some Protective Devices (PDs) can operate undesirably and some network branches may become unprotected. Therefore, it is essential to consider protection constraints in the SR problem to maintain service continuity during power interruptions. The proposed method aims at optimal SR with minimum out-of-service loads, minimum power loss, and improved voltage profiles and at the same time ensures PDs operate correctly during the normal and overloading conditions. The proposed method was carried out on the Debre Markos distribution networks, using the Teaching Learning Based Optimization (TLBO), Particle Swarm Optimization (PSO), and Differential Evolutionary (DEV) algorithms. The proposed SR was carried out considering and without considering protection constraints. The obtained SR topology was not feasible for SR without considering protection constraints, since some PDs fail to operate properly in normal loading conditions. After executing the proposed SR algorithms by considering protection constraints for a single fault case, the power loss reductions in TLBO, DEV, and PSO were 64.9073%, 45.9073%, and 55.358 %, respectively. The minimum voltage profiles obtained in each proposed TLBO, DEV, and PSO algorithm were 0.96%, 0.95%, and 0.96%, respectively. In each algorithm, except for the branch under fault, all healthy out-of-service branches were restored. When the protection constraints were considered in an optimal SR, load current did not exceed the rating of the fuses. The results show the importance of considering protection constraints during SR to prevent dysfunction of the PDs in the network. Comparative analyses were carried out on each algorithm and TLBO algorithms performed better than PSO and DEV for search functions. [ABSTRACT FROM AUTHOR]

• Shielding use in radiology has been re-evaluated. • Major European bodies involved in imaging radiation safety have issued consensus based recommendations. • This paper represents multidisciplinary based recommendations for shielding use. • In the majority of cases patient contact shielding use is not recommended. Patient contact shielding has been in use for many years in radiology departments in order to reduce the effects and risks of ionising radiation on certain organs. New technologies in projection imaging and CT scanning such as digital receptors and automatic exposure control (AEC) systems have reduced doses and improved image consistency. These changes and a greater understanding of both the benefits and the risks from the use of shielding have led to a review of shielding use in radiology. A number of professional bodies have already issued guidance in this regard. This paper represents the current consensus view of the main bodies involved in radiation safety and imaging in Europe: European Federation of Organisations for Medical Physics, European Federation of Radiographer Societies, European Society of Radiology, European Society of Paediatric Radiology, EuroSafe Imaging, European Radiation Dosimetry Group (EURADOS), and European Academy of DentoMaxilloFacial Radiology (EADMFR). It is based on the expert recommendations of the Gonad and Patient Shielding (GAPS) Group formed with the purpose of developing consensus in this area. The recommendations are intended to be clear and easy to use. They are intended as guidance, and they are developed using a multidisciplinary team approach. It is recognised that regulations, custom and practice vary widely on the use of patient shielding in Europe and it is hoped that these recommendations will inform a change management program that will benefit patients and staff. [ABSTRACT FROM AUTHOR]

This article presents an adaptive autoreclosing scheme to preserve the network stability in postfault scenarios for the power grids equipped with synchronous-based distributed generations (SBDGs). Based on the precise fault location information, the proposed adaptive reclosing strategy will classify all the fault events in either reclosing or block reclosing zones. Furthermore, the proposed intelligent autoreclosing scheme will ensure safe and stable network operation by preventing hazardous futile reclosing attempts against persistent faults in forestry or densely populated areas due to serious safety concerns. The swift fault removal by the associated protective devices (PDs) will assist in ensuring the stable operation of the power grid after the fault clearance. If the fault is in the reclosing zones, the adaption of the proposed scheme will permit the reclosing at an appropriate instant to preserve the network stability against momentary faults. However, it will also ensure quick fault clearance by permitting the associated PD to directly operate against the permanent faults by disabling the fast operation of the autorecloser. The validation of the proposed protection strategy has been carried out using the IEEE standardized test system with multiple SBDG units to demonstrate its effectiveness in comparison with the conventional reclosing practices. A comparative analysis has been presented to illustrate the efficacy of the proposed scheme to reduce substantially the postfault swings for different fault events. [ABSTRACT FROM AUTHOR]

The vigorous development of offshore wind energy and dense routes have increased the probability of collision between ships and wind turbines. Based on the nonlinear dynamics theory,the conceptual design of the foam aluminum sandwich structure protection device is proposed. To verify the advantages and disadvantages of the proposed design protection performance,LS-DYNA is used to simulate the collision process of a 3000 t ship and a 5 MW tripod offshore wind turbine. At different ship speeds,the anti-collision performance of the sandwich protection device with the same thickness and different layers was analyzed. The results show that with the same thickness,the 5-layer protective structure has a significant effect on improving the safety of offshore wind turbines,and effectively suppress the dynamic response of the wind turbine tower top. Furthermore the 5-layer anti-collision performance is better than the 3-layer and 4-layer structures. The ship speed is 0. 5 m/s,1 m/s and 2 m/s,the initial kinetic energy absorption ratio of the protective device is 76. 9%,79. 7% and 78. 5%,respectively. In addition,the 5-layer structure has the highest energy absorption ratio. With the increase of ship speed,the damage of the tower is aggravated,and the increase of the absorbed energy is less than that of the initial energy. Under the three speeds,the maximum displacement of the tower top is 80. 8 mm,169. 7 mm,and 375. 5 mm,respectively. The displacement response of the tower top is consistent with the change trend of the ship’s kinetic energy. With the increase of initial kinetic energy,the maximum crashworthiness of the protective device shows a growth trend. The crashworthiness growth rate is smaller than the initial kinetic energy growth rate,and the crashworthiness decreases with the increase in the number of layers of aluminum foam sandwich.

COVID-19 (coronavirus disease, described in 2019) is an infectious disease caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Most confirmed cases are mild or asymptomatic, but the most severe cases can progress to severe pneumonia with respiratory failure and death. In Brazil, there is a scenario of an exponential increase in cases, making it challenging to identify the source of contagion. We cannot yet specify when the peak of the COVID-19 outbreak will occur in our country or when the numbers of new contaminants and deaths will begin to decrease. So, the most important thing is protection against a virus for which all the details about contagion, transmission, and treatment are not known. The pandemic impacted and modified medical care, especially for surgical specialties, where face-to-face care is essential and cannot be replaced entirely by telemedicine. Thus, this review aimed to compile theoretical and practical aspects regarding the pandemic COVID-19 and its impact on plastic surgery activity routine. Protocols are proposed for resuming our routines, analyzing countries' experience at an advanced stage of the pandemic.

Abstract Background Transportation events are the most common cause of offshore fatalities in the oil and gas industry, of which helicopter accidents comprise the majority. Little is known about injury distributions in civilian helicopter crashes, and knowledge of injury distributions could focus research and recommendations for enhanced injury prevention and post-crash survival. This study describes the distribution of injuries among fatalities in Gulf of Mexico oil and gas industry-related helicopter accidents, provides a detailed injury classification to identify potential areas of enhanced safety design, and describes relevant safety features for mitigation of common injuries. Methods Decedents of accidents during 2004–2014 were identified, and autopsy reports were requested from responsible jurisdictions. Documented injuries were coded using the Abbreviated Injury Scale (AIS), and frequency and proportion of injuries by AIS body region and severity were calculated. Injuries were categorized into detailed body regions to target areas for prevention. Results A total of 35 autopsies were coded, with 568 injuries documented. Of these, 23.4% were lower extremity, 22.0% were thorax, 13.6% were upper extremity, and 13.4% were face injuries. Minor injuries were most prevalent in the face, neck, upper and lower extremities, and abdomen. Serious or worse injuries were most prevalent in the thorax (53.6%), spine (50.0%), head (41.7%), and external/other regions (75.0%). The most frequent injuries by detailed body regions were thoracic organ (23.0%), thoracic skeletal (13.3%), abdominal organ (9.6%), and leg injuries (7.4%). Drowning occurred in 13 (37.1%) of victims, and drowning victims had a higher proportion of moderate brain injuries (7.8%) and lower number of documented injuries (3.8) compared with non-drowning victims (2.9 and 9.4%, respectively). Conclusions Knowledge of injury distributions focuses and prioritizes the need for additional safety features not routinely used in helicopters. The most frequent injuries occurred in the thorax and lower extremity regions. Future research requires improved and expanded data, including collection of detailed data to allow characterization of both injury mechanism and distribution. Improved safety systems including airbags and helmets should be implemented and evaluated for their impact on injuries and fatalities.

The Forward Collision Warning (FCW) system has been widely equipped on vehicles to reduce rear-end crashes, which are considered the most common type of crash. However, existing FCW systems have the problem of low response rates, which restrict their safety improvement effects. This study aims to address this issue by building personalized FCW models based on human risk preferences. First, a warning feedback index ranks the gaps between drivers' risk perceptions and FCW models. Then, reward models are developed to characterize the risk perception preferences of each individual driver. After that, the reward models serve as guidelines to fine-tune the benchmark FCW model using the Proximal Policy Optimization (PPO) algorithm. In the empirical analyses, a total of 95,814 warning fragments collected from 74 drivers are used, and the proposed method generates pseudo warning results. By comparing the pseudo and historical warnings, it shows that the precision of pseudo warning results increases from 53.5% to 78.2%. Furthermore, the average differences between the moment of warning and the moment of braking behavior decrease from 2.4 s to 1.6 s. This demonstrates a higher synchronization level in the timing of risk perception between the personalized FCW models and individual drivers, which enhances the driver's trust in the warning system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Arctic miners face significant risks from diesel exhaust and dust exposure, potentially leading to adverse respiratory health. Employers must limit harmful exposures, using personal protective equipment (PPE) as a last line of defense. This study explored the association between reported respiratory exposure and symptoms, and PPE training and usage. Data from the MineHealth study (2012-2014) included a total of 453 Arctic open pit miners in Norway, Sweden, and Finland. Participants answered questions on exposure to dust and diesel exhaust, respiratory symptoms, and PPE use, in addition to age, gender, BMI, smoking, and self-rated health. Estimated exposure to dust was common, reported by 91%, 80%, and 82% and that of diesel exhaust by 84%, 43%, and 47% of workers in Sweden, Finland, and Norway, respectively. Reported dust exposure was significantly related to respiratory symptoms (OR 2.2, 95% CI 1.3-3.7), diesel exposure increased the occurrence of wheezing (OR 2.6, 95% CI 1.3-5.4). PPE use varied between the studied mines. Non-use was common and related to reduced visibility, wetness, skin irritation and fogging of the respiratory PPE. Future research should employ more precise exposure assessment, respiratory function as well as explore the reasons behind the non-compliance of PPE use.

Patient contact shielding has been in use for many years in radiology departments in order to reduce the effects and risks of ionising radiation on certain organs. New technologies in projection imaging and CT scanning such as digital receptors and automatic exposure control systems have reduced doses and improved image consistency. These changes and a greater understanding of both the benefits and the risks from the use of shielding have led to a review of shielding use in radiology. A number of professional bodies have already issued guidance in this regard. This paper represents the current consensus view of the main bodies involved in radiation safety and imaging in Europe: European Federation of Organisations for Medical Physics, European Federation of Radiographer Societies, European Society of Radiology, European Society of Paediatric Radiology, EuroSafe Imaging, European Radiation Dosimetry Group (EURADOS), and European Academy of DentoMaxilloFacial Radiology (EADMFR). It is based on the expert recommendations of the Gonad and Patient Shielding (GAPS) Group formed with the purpose of developing consensus in this area. The recommendations are intended to be clear and easy to use. They are intended as guidance, and they are developed using a multidisciplinary team approach. It is recognised that regulations, custom and practice vary widely on the use of patient shielding in Europe and it is hoped that these recommendations will inform a change management program that will benefit patients and staff. [ABSTRACT FROM AUTHOR]

Background: In a wide range of industries, noise-induced hearing loss remains one of the most prevalent occupational problems. This study aimed to assess the noise exposure level and associated factors of hearing loss among textile workers in Yangon Region, Myanmar. Methods: A cross-sectional study was conducted at a Textile mill (Thamine), Yangon Region, from April to December 2018. In total, 226 workers who were randomly selected from 3 weaving sections participated in face-to-face interviews using a structured questionnaire. A digital sound level meter and pure-tone audiometer were used for the assessment of noise exposure level and hearing loss, respectively. Logistic regression analysis was performed to assess the associated factors of hearing loss. Results: In total workers, 66.4% were exposed to ≥85 dB(A) of noise exposure, and the prevalence of hearing loss was 25.7%. Age ≥35 years, below high school education, hearing difficulty, tinnitus, hypertension, > 9 years of service duration in a textile mill were positively associated with hearing loss. After adjusting confounding factors, age ≥35 years (adjusted odds ratio = 6.90, 95% confidence interval = 3.45-13.82) and tinnitus (adjusted odds ratio = 2.88, 95% confidence interval = 1.13-7.37) were persistently associated with hearing loss. Conclusion: Providing occupational hazard education and enforcement of occupational safety regulations should be taken to decrease the noise exposure level. The regular audiometry test should be conducted for assessment of hearing threshold shift. The employer needs to implement a hearing conservation program in workplace when noise exposure reaches or exceeds 85 dB(A) for 8 hours.

Modern vehicles are vulnerable to cyberattacks and the consequences can be severe. While technological efforts have attempted to address the problem, the role of human drivers is understudied. This study aims to assess the effectiveness of training and warning systems on drivers' response behavior to vehicle cyberattacks. Thirty-two participants completed a driving simulator study to assess the effectiveness of training and warning system according to their velocity, deceleration events, and count of cautionary behaviors. Participants, who held a valid United States driving license and had a mean age of 20.4 years old, were equally assigned to one of four groups: control (n = 8), training-only (n = 8), warning-only (n = 8), training and warning groups (n = 8). For each drive, mixed ANOVAs were implemented on the velocity variables and Poisson regression was conducted on the normalized time with large deceleration events and cautionary behavior variables. Overall, the results suggest that drivers' response behaviors were moderately affected by the training programs and the warning messages. Most drivers who received training or warning messages responded safely and appropriately to cyberattacks, e.g., by slowing down, pulling over, or performing cautionary behaviors, but only in specific cyberattack events. Training programs show promise in improving drivers' responses toward vehicle cyberattacks, and warning messages show rather moderate improvement but can be further refined to yield consistent behavior., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This paper presents an enhanced probabilistic approach to estimate the real-world safety performance of new device concepts for road safety applications from the perspective of Powered Two-Wheeler (PTW) riders who suffer multiple injuries in different body regions. The proposed method estimates the overall effectiveness of safety devices for PTW riders by correlating computer simulations with various levels of actual injuries collected worldwide from accident databases. The study further develops the methodology initially presented by Johnny Korner in 1989 by introducing a new indicator, Global Potential Damage (GPD), that overcomes the limitations of the original method, encompassing six biomechanical injury indices estimated in five body regions. A Weibull regression model was fit to the field data using the Maximum Likelihood Method with boundaries at the 90% confidence level for the construction of novel injury risk curves for PTW riders. The modified methodology was applied for the holistic evaluation of the effectiveness of a new safety system, the Belted Safety Jacket (BSJ), in head-on collisions across multiple injury indices, body regions, vehicle types, and speed pairs without sub-optimizing it at specific crash severities. A virtual multi-body environment was employed to reproduce a selected set of crashes. The BSJ is a device concept comprising a vest with safety belts to restrict the rider's movements relative to the PTW during crashes. The BSJ exhibited 59% effectiveness, with an undoubted benefit to the head, neck, chest, and lower extremities. The results show that the proposed methodology enables an overall assessment of the injuries, thus improving the protection of PTW users. The novel indicator supports a robust evaluation of safety systems, specifically relevant in the context of PTW accidents., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Purpose: We examined collision warning systems with different modalities and timing thresholds, assessing their impact on responses to pedestrian hazards by drivers with impaired contrast sensitivity (ICS)., Methods: Seventeen ICS (70-84 y, median CS 1.35 log units) and 17 normal vision (NV: 68-73 y, median CS 1.95) participants completed 6 city drives in a simulator with 3 bimodal warnings: visual-auditory, visual-directional-tactile, and visual-non-directional-tactile. Each modality had one drive with early and one with late warnings, triggered at 3.5 s and 2 s time-to-collision, respectively., Results: ICS participants triggered more early (43 vs 37 %) and late warnings (12 vs 6 %) than NV participants and had more collisions (3 vs 0 %). Early warnings reduced time to fixate hazards (late 1.9 vs early 1.2 s, p < 0.001), brake response times (2.8 vs 1.8 s, p < 0.001) and collision rates (1.2 vs 0.02 %). With late warnings, ICS participants took 0.7 s longer to brake than NV (p < 0.001) and had an 11 % collision rate (vs 0.7 % with early warnings). Non-directional-tactile warnings yielded the lowest collision rates for ICS participants (4 vs auditory 12 vs directional-tactile 15.2 %) in late warning scenarios. All ICS participants preferred early warnings., Conclusions: While early warnings improved hazard responses and reduced collisions for ICS participants, late warnings did not, resulting in high collision rates. In contrast, both early and late warnings were helpful for NV drivers. Non-directional-tactile warnings were the most effective in reducing collisions. The findings provide insights relevant to the development of hazard warnings tailored for drivers with impaired vision., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Wearing hip protectors is a measure used to prevent hip fractures caused by falls. However, its protective effect has remained controversial in previous studies. This study provides a rationale for the use of hip protectors by pooling all the current meta-analysis evidence., Methods: We conducted an umbrella review of all the current meta-analysis articles about the efficacy of hip protectors to reduce hip fractures and falls in communities and/or institutions. Major databases including EMBASE, Cochrane Library, PubMed and Web of Science, were searched up to June 2022. Two reviewers screened the studies, extracted the data, and conducted the methodological quality assessment independently. The primary outcome was the association statistic (odds ratio (OR), relative risk (RR), etc.) reported in the meta-analysis that quantified the influence of the intervention on hip fractures and falls compared to that of the control group. Narrative synthesis was also conducted. Forest plots and the AMSTAR score were used to describe the results and quality of the pooled literature, respectively., Results: A total of six meta-analysis articles were included in the study. Hip protectors were effective at reducing hip fractures in older individuals who were in institutions (nursing or residential care settings) but not in communities (RR = 0.70, 95% CI 0.58 to 0.85, I 2  = 42%, P < 0.001) (RR = 1.12, 95% CI 0.94 to 1.34, I 2  = 0%, P = 0.20), and they did not reduce falls (RR = 1.01, 95% CI 0.90 to 1.13, I 2  = 0%, P = 0.89)., Conclusions: Hip protectors are effective at preventing hip fractures in institutionalized older adults but not in community-dwelling older adults., Trial Registration: This study has been registered in PROSPERO (PROSPERO ID: CRD42022351773)., (© 2024. The Author(s).)

Purpose : The aim of this study is to investigate the dynamic and biomechanical response of the pelvis and thoracolumbar spine in simulated under-body blast (UBB) impacts and design of protective seat cushion for thoracolumbar spine injuries. Methods : A whole-body FE (finite element) human body model in the anthropometry of Chinese 50th% adult male (named as C-HBM) was validated against existing PHMS (Postmortem Human Subjects) test data and employed to understand the dynamic and biomechanical response of the pelvis and thoracolumbar spine from FE simulations of UBB impacts. Then, the protective capability of different seat cushion designs for UBB pelvis and thoracolumbar injury risk was compared based on the predictions of the C-HBM. Results : The predicted spinal accelerations from the C-HUM are almost within the PHMS corridors. UBB impact combined with the effects from physiological curve of the human thoracolumbar spine and torso inertia leads to thoracolumbar spine anterior bending and axial compression, which results in stress concentration in the segments of T4-T8, T12-L1 and L4-L5. Foam seat cushion can effectively reduce the risk of thoracolumbar spine injury of armored vehicle occupants in UBB impacts, and the DO3 foam has better protective performance than ordinary foam, the 60 mm thick DO3 foam could reduce pelvic acceleration peak and DRIz value by 52.8% and 17.2%, respectively. Conclusions : UBB spinal injury risk is sensitive to the input load level, but reducing the pelvic acceleration peak only is not enough for protection of spinal UBB injury risk, control of torso inertia effect would be much helpful., (© 2024 Wei Luo et al., published by Sciendo.)

The central question of our study is which determinants drive smoke alarm ownership and intention to purchase one, and whether we can increase smoke alarm ownership by addressing these determinants in a communication-based intervention. We first made an inventory of possible determinants for smoke alarm prevention by consulting prominent prevention behavior theories protection motivation theory and Health Belief Model and other relevant literature. We expanded this list of determinants based on interviews (n = 15) and used survey data representative for the Netherlands to decide to focus on smoke alarm ownership (rather than installation or maintenance). We then tested the determinants of smoke alarm ownership and buying intention in a survey (n = 622). Based on these results, we ran an A/B test (n = 310) of two messages to stimulate smoke alarm ownership: one emphasized the determinants we found to be strong predictors in the survey (know-how, social norm, annoyance) and one emphasized typical determinants that are often addressed in campaigns but were poor predictors in the survey (vulnerability, severity, benefits). Results showed that the message based on the strong determinants resulted in a significant increase in smoke alarm ownership (9.1%) compared to the control group (0.9%; p = 0.027), while the message using the typical determinants did not lead to significant effects. Taken together, our results give a promising direction for interventions to increase smoke alarm ownership, and above all, show that a comprehensive problem analysis for a specific target behavior is a necessary step to induce behavioral change., (© 2023 The Authors. Risk Analysis published by Wiley Periodicals LLC on behalf of Society for Risk Analysis.)

Zoonoses account for 61% of human infectious diseases and 75% of emerging pathogens (1). Zoonotic diseases pass from animals to humans through direct contact with animals, inhalation of infectious aerosols, [...]

To develop and test a protective device (PD) to increase the resistance of photostimulable storage phosphor (PSP) plate to compressive load, and assess the resulting image quality. Two prototypes, polyvinylchloride sheets of 0.3 mm and 0.7 mm each, were developed for PSP plate size 2. The resistance to compressive load was tested using eight new PSPs divided into four test groups: (1) PSP, (2) PSP and paperboard protector, (3) PSP and 0.3 mm PD, and (4) PSP and 0.7 mm PD. The resulting images were analyzed by three oral radiologists, based on the consensus for image artifacts. Additionally, the objective image quality test was performed with four new PSPs, using an 8-step wedge aluminum scale. The mean gray values and standard deviation were measured in a total of 240 images, and the data were analyzed using analysis of variance with Bonferroni post-hoc test. Artifacts were seen in the PSP control group starting at 40 n, and at 150 n, 175 n and 300 n in 0.3 mm PD, paperboard protector and 0.7 mm PD, respectively. Although there was no statistical difference among groups, there were differences between exposure times (0.06–0.25 s, 0.06–0.40 s, and 0.10–0.40 s). Scanning resolution of 20 lp/mm showed higher mean gray value than 25 and 40 lp/mm (p < 0.05) The developed PDs improved the PSP resistance to compressive forces, with low interference on the pixel gray values, regardless of exposure time and spatial resolution. Nevertheless, the 0.7 mm PD could withstand the maximum compressive load. [ABSTRACT FROM AUTHOR]