Search

Background : Employing citric acid/dimethyl formamide (CA/DMF), two distinct types of carbon quantum dots (CQDs), tree-shaped/fingerprinted (TF-CQDs) and fullerene-like (F) were synthesized from both cellulose and carboxymethyl cellulose (CMC). Methods : Fluorescence microscopy revealed different emission colors: blue for TF-CQDs and green for F, highlighting the structural influence on light properties. Transmission electron microscopy (TEM) confirmed the intricate fingerprinted and tree-like morphology of TF-CQDs and the spherical nature of F derived from CMC. The adsorption behavior and kinetics of Cr(vi) removal from water by TF-CQDs and F were evaluated. Significant findings : Both samples demonstrated rapid Cr(vi) uptake; TF-CQDs reached equilibrium within 120 minutes compared to 240 minutes for F. Subsequent leaching led to decreased adsorption after these initial periods. Kinetic analysis revealed a first-order model for TF-CQDs, implying physical adsorption dominance. Conversely, F exhibited a better fit to pseudo-first and second-order models, suggesting combined chemical and physical mechanisms., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The graphitic carbon nitride (g-C 3 N 4 ) photocatalysis has emerged as a clean method for cleaving lignin-linked bonds due to its mild and sunlight-driven reaction conditions. The fast electron-hole pair complex of g-C 3 N 4 constrains its degradation efficiency, making the heterojunction construction a popular solution. The conventional methods of preparing g-C 3 N 4 heterojunctions by physical mixing destroy π-conjugations in g-C 3 N 4 , reducing the adsorption of lignin containing benzene rings. In this study, a novel indium oxide (In 2 O 3 ) quantum dot-g-C 3 N 4 0D/2D heterojunction was prepared through the high-temperature oxidation of pre-prepared indium-doped g-C 3 N 4 . The introduction of In 2 O 3 at the quantum dot level minimizes the interference with lignin adsorption capacity. The strong combination of the two (In 2 O 3 and g-C 3 N 4 ) increases the intersection interface area, promoting the S-scheme transfer route of the photogenerated electrons. Consequently, this enhances the photoelectric conversion efficiency and carrier lifetime of the heterojunction, and inhibits the rapid recombination of photogenerated electron-hole pairs in g-C 3 N 4 . The proposed heterojunction was 3 times more efficient than g-C 3 N 4 alone for selective cleavage of lignin β-O-4 bonds after 2 h of sunlight irradiation. Combined with inhibitor experiments and gas chromatography-mass spectrometry analysis, this paper defines the reactive oxides and proposes a cleavage pathway for the lignin β-O-4 bonds in In 2 O 3 -g-C 3 N 4 heterojunction system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

This study reports a novel, eco-friendly; fast and cost-effective microwave method for synthesizing carboxymethylated graphene oxide (CMGO) from sugarcane residues. Fourier-transform infrared spectroscopy (FTIR) confirmed successful CMGO synthesis through the presence of characteristic peaks at 1567.93 and 1639.29 cm -1 (COONa vibrations) and increased CH 2 intensity compared to unmodified graphene oxide (GO). Furthermore, CMGO derived from sugarcane residues demonstrated potential in mitigating the side effects of toxic materials like carbon tetrachloride (CCl 4 ). Treatment with CMGO partially reduced elevated levels of liver enzymes (ALT and AST) and nitrogenous waste products (urea and uric acid) in CCl 4 -induced liver damage models, suggesting an improvement in liver function despite ongoing cellular damage.This work paves the way for a sustainable and economical approach to produce functionalized graphene oxide with promising biomedical applications in alleviating toxin-induced liver injury., (© 2024. The Author(s).)

This study aimed to investigate the biodegradation behaviour of starch/nanocellulose/black tea extract (SNBTE) films in a 30-day soil burial test. The SNBTE films were prepared by mixing commercial starch, nanocellulose (2, 4, and 6%), and an aqueous solution of black tea extract by a simple mixing and casting process. The chemical and morphological properties of the SNBTE films before and after biodegradation were characterized using the following analytical techniques such as field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and fourier transform infrared (FTIR). The changes in soil composition, namely pH, electrical conductivity (EC), moisture content, water holding capacity (WHC), soil respiration, total nitrogen, weight mean diameter (MDW), and geometric mean diameter (GMD), as a result of the biodegradation process, were also estimated. The results showed that the films exhibited considerable biodegradability (35-67%) within 30 days while increasing soil nutrients. The addition of black tea extract reduced the biodegradation rate due to its polyphenol content, which likely resulted in a reduction in microbial activity. The addition of nanocellulose (2-6% weight of starch) increased the tensile strength, but decreased the elongation at break of the films. These results suggest that starch nanocellulose and SNBTE films are not only biodegradable under soil conditions but also positively contribute to soil health, highlighting their potential as an environmentally friendly alternative to traditional plastic films in the packaging industry., (© 2024. The Author(s).)

This work deals with the fabrication of lignin containing cellulose nanofiber (LCNF)/Ag 2 Se films for thermoelectric applications. Ag 2 Se nanoparticles were synthesized within the LCNF network through in situ methods, employing Na 2 SeO 3 and AgNO 3 along with microwave energy treatment. LCNF/Ag 2 Se films fabricated with two LCNF : Ag 2 Se weight percent ratios ( i.e. , 50 : 50 and 30 : 70) were used to construct a flexible thermoelectric module. The obtained Ag 2 Se nanoparticles displayed a uniform size distribution in the LCNF network with smaller dimensions from the microwave energy treated group. The microstructure of LCNF/Ag 2 Se films was improved by hot-pressing, leading to enhanced film density thermoelectric properties. At a differential temperature of 50 K, films with 50% and 70% of Ag 2 Se exhibited output voltages of 18 and 21 mV; and Seebeck coefficients of -60 and -70 μV K -1 at 350 K, respectively. When microwave energy was applied, the films at 50% and 70% Ag 2 Se showed highest output voltages of 19 and 33 mV, respectively, and Seebeck coefficients of -63.3 and -110 μV K -1 at 350 K. The low-cost fabrication process associated with this module opens a pathway for applications such as energy harvesting., Competing Interests: No conflicts require declaration., (This journal is © The Royal Society of Chemistry.)

Background: Ferroptosis is a novel form of regulated cell death that involves in cancer progression. However, the role of ferroptosis-related long non-coding RNAs (lncRNAs) in papillary thyroid cancer (PTC) remains to be elucidated. The purpose of this paper was to clarify the prognostic value of ferroptosis-related lncRNAs in PTC., Methods: The transcriptome data and clinical information were downloaded from The Cancer Genome Atlas (TCGA) database. The correlation between ferroptosis-related genes (FRGs) and lncRNA was determined using Pearson correlation analysis. Multivariate Cox regression model (P < 0.01) was performed to establish a ferroptosis-related lncRNAs risk model. Kaplan-Meier survival analysis, receiver operating characteristic (ROC) curves, risk curve and nomograms were then performed to assess the accuracy and clinical applicability of prognostic models. The correlations between the prognosis model and clinicopathological variables, immune and m6A were analyzed. Finally, in vitro assays were performed to verify the role of LINC00900, LINC01614 and PARAL1 on the proliferation, migration and invasion in TPC-1 and BCPAP cells, as well as the relationship between three lncRNAs and ferroptosis., Results: A five-ferroptosis-related lncRNAs (PARAL1, LINC00900, DPH6-DT, LINC01614, LPP-AS2) risk model was constructed. Based on the risk score, samples were divided into the high- and low-risk groups. Patients in the low-risk group had better prognosis than those in high-risk group. Compared to traditional clinicopathological features, risk score was more accurate in predicting prognosis in patients with PTC. Additionally, the difference of immune cell, function and checkpoints was observed between two groups. Moreover, experiments showed that LINC00900 promoted the proliferation, migration and invasion in TPC-1 and BCPAP cells, while LINC01614 and PARAL1 revealed opposite effects, all of which were related to ferroptosis., Conclusions: In summary, we identified a five-ferroptosis-related lncRNAs risk model to predict the prognosis of PTC. Furthermore, our study also revealed that LINC00900 functioned as a tumor suppressor lncRNA, LINC01614 and PARAL1 as an oncogenic lncRNA in PTC., Competing Interests: The authors declare that they have no conflict of interest to declare., (Copyright 2024, Zhao et al.)

Treating hazardous landfill leachate poses significant environmental challenges due to its complex nature. In this study, we propose a novel approach for enhancing the anaerobic digestion of landfill leachate using silver nanoparticles (Ag NPs) conjugated with eco-friendly green silica nanoparticles (Si NPs). The synthesized Si NPs and Ag@Si NPs were characterized using various analytical techniques, including transmission electron microscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy. The anaerobic digestion performance of Si NPs and Ag@Si NPs was tested by treating landfill leachate samples with 50 mg/L of each NP. The results demonstrated an enhancement in the biogas production rate compared to the control phase without the nanocomposite, as the biogas production increased by 14% and 37% using Si NPs and Ag@Si NPs. Ag@Si NPs effectively promoted the degradation of organic pollutants in the leachate, regarding chemical oxygen demand (COD) and volatile solids (VS) by 58% and 65%. Furthermore, microbial analysis revealed that Ag@Si NPs enhanced the activity of microbial species responsible for the methanogenic process. Overall, incorporating AgNPs conjugated with eco-friendly green Si NPs represents a sustainable and efficient approach for enhancing the anaerobic digestion of landfill leachate., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The chemical safety of poly (butylene adipate-co-terephthalate) (PBAT) based food contact articles (FCAs) has aroused increasing toxicological concerns in recent years, but the chemical characterization and associated risk assessment still remain inadequate as it fails to elucidate the distribution pattern and discern the potential genotoxic and carcinogenic hazards of the identified substances. Herein, the volatile organic compounds (VOCs) in 50 batches of PBAT-based FCAs of representative categories and 10 batches of PLA and PBAT pellets were characterized, by which 237 VOCs of 10 chemical categories were identified and exhibited characteristic distribution patterns in the chemical spaces derived from their molecular descriptors. Chemical hazards associated with the identified VOCs were discerned by a hazard-driven classification scheme integrating hazard-related knowledge from multiple publicly available sources, and 34 VOCs were found to bear genotoxic or carcinogenic hazards and to feature higher average molecular weight than the other VOCs. Finally, the Risk and hazard quotient (HQ) calculated as the metrics of risk suggested that all identified VOCs posed acceptable risks (Risk<10 -4 or HQ < 1), whereas oxolane, butyrolactone, N,N-dimethylacetamide, 2-butoxyethanol, benzyl alcohol, and 1,2,3-trichloropropane posed non-negligible (Risk>10 -6) genotoxic or carcinogenic risk and thus should be of prioritized concern to promote the chemical safety of PBAT-based FCAs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Developing a high-performance activator is crucial for the practical application of peroxymonosulfate-based advanced oxidation processes (PMS-AOPs). High-entropy oxides (HEOs) have attracted increasing attention due to their stable crystal structure, flexible composition and unique functionality. However, research into the mechanisms by which HEOs function as PMS activators for degrading organic pollutants remains insufficient, and the relationship between entropy and the catalytic performance of HEOs has yet to be clarified. In this study, we synthesized NiMgZnCuCoO x with different levels of entropy as PMS activators for acetaminophen (APAP) degradation, and observed a significant effect for entropy on the catalytic performance. Sulfate radicals (SO 4 • ‒ ) were identified as the primary reactive oxygen species (ROS), while hydroxyl radicals (•OH) and singlet oxygen ( 1 O 2 ) act as secondary ROS during APAP degradation. Both the Co 2+ contents and the oxygen vacancy concentration in NiMgZnCuCoO x are found to increase with the entropy. An increase in the Co 2+ sites leads to more activation sites for PMS activation, while excessive oxygen vacancies consume PMS, producing weak oxidation species, and affect the electron-donating ability of Co 2+ . Consequently, the NiMgZnCuCoO x with middle level of entropy exhibits the optimal performance with APAP degradation rate and mineralization rate reaching 100% and 74.22%, respectively. Furthermore, the degradation intermediates and their toxicities were assessed through liquid chromatography-mass spectrometry and quantitative structure-activity relationship analysis. This work is expected to provide critical insight into the impact of the HEOs entropy on the PMS activation and guide the rational design of highly efficient peroxymonosulfate activators for environmental applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Electron tomography has become a commonly used tool to investigate the three-dimensional (3D) structure of nanomaterials, including colloidal nanoparticle assemblies. However, electron microscopy is typically done under high-vacuum conditions, requiring sample preparation for assemblies obtained by wet colloid chemistry methods. This involves solvent evaporation and deposition on a solid support, which consistently alters the nanoparticle organization. Here, we suggest using electron tomography to study nanoparticle assemblies in their original colloidal liquid environment. To address the challenges related to electron tomography in liquid, we devise a method that combines fast data acquisition in a commercial liquid-cell with a dedicated alignment and reconstruction workflow. We present the advantages of this methodology in accurately characterizing two different systems. 3D reconstructions of assemblies comprising polystyrene-capped Au nanoparticles encapsulated in polymeric shells reveal less compact and more distorted configurations for experiments performed in a liquid medium compared to their dried counterparts. A similar expansion can be observed in quantitative analysis of the surface-to-surface distances of self-assembled Au nanorods in water rather than in a vacuum, in agreement with bulk measurements. This study, therefore, emphasizes the importance of developing high-resolution characterization tools that preserve the native environment of colloidal nanostructures., (© 2024. The Author(s).)

In this study, a comparative analysis of silver nanoparticles treatment and chitosan coating on packaging paper barrier properties was carried out. In order to examine the water, grease, and antibacterial barrier properties of silver nanoparticle-treated and chitosan-coated laboratory-obtained paper samples, a mixture of bleached softwood and hardwood celluloses was used. In order to conduct the comparative analysis SEM, water contact angle, Cobb 60 , and Kit tests were carried out on a cellulose sample, and four paper samples (three of them treated with silver nanoparticles-1, 2, and 3 mL/20 cm 2 or chitosan coated-0.5, 1, and 2 g/m 2 ) together with the inhibition activity against nine Gram-positive and Gram-negative bacteria, yeast, and fungal strains. The study found out that increasing the silver nanoparticle treatment and chitosan coating led to improved water resistance, while grease resistance was improved only for chitosan coated paper samples. Additionally, paper treated with 3 mL/20 cm 2 of silver nanoparticles had the highest antibacterial protection (81.6%) against the Gram-positive bacterium Staphylococcus aureus , followed by Gram-negative Escherichia coli (75.8%). For the rest of the studied microorganisms, the average efficiency of the treated paper was 40.79%. The treatment of the paper with 1 and 2 mL/20 cm 2 of silver nanoparticles was less effective-27.13 and 39.83%, respectively. The antibacterial protection of 2 g/m 2 chitosan-coated paper samples was the most effective (average 79%) against the tested bacterial, yeast, and fungal strains. At 1 and 0.5 g/m 2 chitosan coatings, the efficiency was 72.38% and 54.67%, respectively. Gram-positive bacteria, yeasts, and fungal strains were more sensitive to chitosan supplementation.

Clothing and textile industries are major contributors to environmental pollution including textile manufacturing through garment production, spinning, weaving, and dyeing. In this context, the sustainability textile industry is a big challenge and contributes to serving a large segment of society. Also, textile wastes could be used as a raw material for added-value products. Herein, in this study, recycling of residues fabric was treated with antimicrobial nanocomposite to reach the best use of exhausts and obtain multifunction products of aesthetic via the technical design of the waste raw materials. Besides, solving the unemployment problem by opening fields for small industry projects capable of producing high-value textile artifacts, especially when treated against microbes, can be applied to home furnishings. The waste fabric was treated via green synthesis nanocomposite based on chitosan and in situ prepared ZnONPs and cross-linked with tannic acid. The prepared nanocomposite was characterized using physicochemical analysis including attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD). Additionally, the nanocomposite and treated fabric topographical behavior were studied using scanning electron microscopy (SEM) attachment with energy dispersive X-ray analysis (EDX), and images were processed to evaluate the roughness structure. Additionally, high-resolution transmission electron microscopy (HR-TEM) and dynamic light scattering (DLS) were performed to ensure the size and stability of the nanocomposite. The obtained results affirmed the green synthesis of nanocomposite with a size around 130 nm, as well as the doped ZnONPs average size of 26 nm and treated waste fabric, performed a promising attraction between nanocomposite and fabric fibers. Moreover, the antimicrobial study observed excellent activity of nanocomposite against bacteria and unicellular fungi as well., (© 2024. The Author(s).)

Natural-based materials represent green choices for biomedical applications. In this study, resin pulp capping restoration enclosing strengthening silica and bioactive portlandite nanofillers were prepared from industrial wastes. Silica nanoparticles were isolated from rice husk by heat treatment, followed by dissolution/precipitation treatment. Portlandite nanoparticles were prepared by calcination of carbonated lime waste followed by ultrasonic treatment. Both were characterized using x-ray diffraction, energy dispersive x-ray, and transmission electron microscopy. For preparing pulp capping restoration, silica (after silanization) and/or portlandite nanoparticles were mixed with 40/60 weight ratio of bisphenol A-glycidyl methacrylate and triethylene glycol dimethacrylate. Groups A, B, and C enclosing 50 wt.% silica, 25 wt.% silica + 25 wt.% portlandite, and 50 wt.% portlandite, respectively, were prepared. All groups underwent microhardness, compressive strength, calcium release, pH, and apatite forming ability inspection in comparison to mineral trioxide aggregate (MTA) positive control. In comparison to MTA, all experimental groups showed significantly higher compressive strength, group B showed comparable microhardness, and group C showed significantly higher calcium release. Groups B and C showed prominent hydroxyapatite formation. Thus, the preparation of economic, silica-fortified, bioactive pulp capping material from under-utilized agricultural residues (rice husk) and zero-value industrial waste (carbonated lime from sugar industry) could be achieved., (© 2024. The Author(s).)

Flexible electrothermal heaters have attracted abundant attention in recent years due to their wide applications, but their preparation with high efficiency remains a challenge. Here in this work, a highly stable and bending-tolerant flexible heater was fabricated with graphite nanosheets and cellulose fibers through a scalable papermaking procedure. Its electrothermal property can be enhanced by a hot-pressing treatment and introduction of cationic polyacrylamide (CPAM) during the papermaking protocol. The flexible heater may quickly reach its maximum temperature of 239.8 °C in around 1 min at a voltage of 9 V. The power density was up to 375.3 °C cm 2 w -1 . It appeared to have a high tolerance for bending deformation with various curvatures, and the temperature remained stable even under 100 bending with frequency of around 0.17 Hz. Over 100 alternatively heating and cooling cycles, it worked stably as well. It was proved to be used as wearable heating equipment, soft heaters, and aircraft deicing devices, suggesting its great prospect in the field of heat management.

The paper industry faces two critical challenges: the scarcity of raw materials and the environmental impact of chemical waste pollution. Addressing the first challenge involves harnessing alternative, sustainable raw materials, while the second challenge can be mitigated through the adoption of bio-bleaching processes, which significantly reduce chemical consumption while enhancing paper brightness and quality. This study proposes a solution to both challenges by using non-woody Calotropis procera (Ankara) and a xylanase-producing microbial consortium for sustainable handmade paper production, a combination not extensively explored in prior research . To evaluate this approach, the process was divided into three stages. In stage I, Ankara fibre was pulped through open hot digestion. In stage II, the pulp was subjected to bio-bleaching in two experimental setups: Set I (without sucrose) and Set II (with sucrose) for 5 days. In stage III, chemical bleaching was used to improve the final brightness of the treated pulps. A novel comparison was made between the bio-bleaching efficiency of an individual isolate g5 (BI) and a bacterial consortium (BC). This research highlighted that bio-bleaching with the consortium effectively removed lignin (140±60 mg/l) and colour (1830±50 PCU), especially in the presence of sucrose, compared to using a single xylanase isolate. Pulp residue/filtrate collected at each stage was estimated based on parameters such as colour and lignin content. After stage III (chemical bleaching), the release of colour and lignin in pulp filtrate was higher in BI compared to BC, indicating the consortium's effectiveness during bio-bleaching, which leaves fewer degradable lignin structures for the chemical bleaching stage. Papers crafted from consortium-treated pulp also exhibited higher brightness than those treated with the isolate. This study reveals the synergistic effect of microbial consortia, leading to more efficient lignin degradation and enhanced bio-bleaching capabilities, supporting the development of greener industrial processes. Ultimately, this study demonstrates a unique and eco-friendly approach to papermaking, combining C. procera and enzymatic bio-bleaching to reduce dependency on hazardous chemicals and support sustainable industry practices., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Author(s).)

This study promotes the use of nanobiochar (NBC) as an environmentally friendly substitute to conventional fillers to improve various properties of biopolymers such as their mechanical strength, thermal stability and crystallization properties. TGA analysis showed a slight increase in onset thermal degradation temperature of the composites by up to 5 °C with the addition of 4 wt% NBC. Non-isothermal DSC analysis determined that the addition of NBC into PHBHHx increases the crystallization temperature and degree of crystallinity of PHBHHx while isothermal DSC analysis demonstrated higher crystallization rate in PHBHHx/NBC composited by up to 54%. PHBHHx incorporated with NBC also exhibited superior tensile strength and modulus versus neat PHBHHx. Increase in mechanical strength was further proven via DMA where PHBHHx/NBC composites maintained higher storage modulus at higher temperatures when compared to neat PHBHHx. PHBHHx/NBC also exhibited no cytotoxicity effect against HaCat cells. This study demonstrates the ability of biochar to act as both nucleating agents and reinforcing agents in biodegradable polymers such as PHBHHx, which could be suitable for packaging application., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

Lignin, a natural pol2ymer with a complex structure that is difficult to separate, is prone to C-C bond condensation during the separation process. To reduce the condensation of lignin, here, a novel method is proposed for separating the components by using a combination of maleic acid (MA)/ozone (O 3 ) to co-treat wheat straw. The removal of lignin, glucan, and xylan was 38.07 ± 0.2%, 31.44 ± 0.1%, and 71.98 ± 0.1%, respectively, under the conditions of ball-milling of wheat straw for 6 h, reaction temperature of 60 °C, and O 3 holding time of 9 min. Lignin-rich solutions were collected to extract the dissolved lignin (DL) after washing the treated samples. The DL obtained under MA/O 3 conditions had a carboxyl group (-COOH) content of 2.96 mmol/g. The carboxyl group of MA underwent esterification with the hydroxyl group (-OH) at the γ position of lignin and O 3 reacted on the positions of the lignin side chain or the phenolic ring, resulting in a break in the side chain and the opening of the phenolic ring to introduce the carboxyl group. The 2D-HSQC-NMR results revealed that the phenolic ring-opening reaction of lignin in the presence of O 3 was essentially free of β-β and β-5 condensation bonds.

Affinity and storage capacity for zinc ions of the electrode materials are crucial factors on the properties of zinc ion hybrid capacitors (ZHICs). Wasted pulping liquor with abundant carbohydrates, lignin and inorganic matter served as a unique precursor to produce embedded oxygen-doped hierarchical porous carbon directly through a one-step carbonization process in this investigation. In carbonization process, lignin can serve effectively as the carbon framework, carbohydrates not only act as sacrificial templates but also offer a plentiful oxygen source which can increase the affinity for Zn 2+ , and sodium-containing inorganic substances plays a role as hard templates to optimize the pore structure. The resulting porous carbon under carbonization temperature of 800 °C shows a high specifical area of 2186 m 2 g -1 with oxygen content of 4.8 %, which can reduce the adsorption energy of Zn 2+ from -0.16 eV to -0.32 eV through electrochemical techniques and density functional theory (DFT) calculations, the incorporation of oxygen was demonstrated to enhance the adsorption and desorption kinetics of Zn 2+ , suggesting a bright future for application in the domain of energy storage. The resulting ZIHC assembly showcases a notable energy density of 84.6 Wh kg -1 at a power density of 359 W kg -1 . Remarkably, even after 10,000 charge and discharge cycles, it exhibits exceptional cycle stability with retaining 86.56 % of its capacity. Consequently, this approach provides fresh insights for exploring the facile and commercial fabrication of biomass-derived cathodes for ZIHCs, thereby propelling the progress of eco-friendly energy storage devices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

The scarcity of freshwater resources and increasing demand for drinking water have driven the development of durable and sustainable desalination technologies. Although MXene composites have shown promise due to their excellent photothermal conversion and high thermal conductivity, their high hydrophilicity often leads to salt precipitation and low durability. In this study, we present a novel Cellulose (CF)/MXene paper with a Janus hydrophobic/hydrophilic configuration for long-term and efficient solar-driven desalination. The paper features a dual-layer structure, with the upper hydrophobic layer composed of CF/MXene paper exhibiting convexness to serve as a photothermal layer with exceptional salt rejection properties. Simultaneously, the bottom porous layer made of CF acts as an efficient thermal insulation. This unique design effectively minimizes heat loss and facilitates efficient water transportation. The Janus CF/MXene paper demonstrates a high evaporation rate of 1.11 kg m -2 h -1 and solar thermal conversion efficiency of 82.52 % under 1 sun irradiation. Importantly, even after 2500 h of operation in a simulated seawater environment, the paper maintains a stable evaporation rate without significant salt deposition and biodegradation due to an antibacterial rate exceeding 90 %. These findings highlight the potential of the Janus CF/MXene paper for scalable manufacturing and practical applications in solar-driven desalination., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

This work deals with promoting the efficiency of removing the cationic and ionic dyes by new aerogel-carbon nanostructures. For cleaner production the rice straw-pulping black liquors, which regards serious environmental risk during routine disposing, is used in preparing the aerogel precursors. These aerogels (AGBs) depend on using pulping black liquor in hybrid with resorcinol and the less carcinogenic formaldehyde butyraldehyde. Black liquors from five pulping processes are used, Elemental, thermogravimetric (TGA and DTG), and FTIR-ATR analyses are used to characterize the carbon precursors. While their adsorption behavior toward cationic and anionic dyes are accessed via iodine-value, adsorption capacity and kinetic models, textural characterization, and SEM. The TGA measurements reveal that AGBs from BLs of neutral sulfite and soda-borohydride pulping reagents have higher activation and degradation energies than other aerogels. In terms of cationic and anionic dyes adsorption as well as textural characterization, the AGB-CNSs surpass that made from BLs. The discarded KOH/NH 4 OH black liquor is used to synthesize the best aerogel precursor for producing cationic methylene blue dye (MB) adsorbent, where it provides an adsorption capacity 242.1 mg/g. The maximum anionic brilliant blue dye (BB) adsorption capacity, 162.6 mg/g, is noticed by Kraft BL-aerogel-CNSs. These finding data overcome the literature carbon adsorbents based on lignin precursors. All examined CNSs toward MB dye follow the Langmuir adsorption equilibrium; while primarily the Freundlich model for BB dye. The pseudo-second-order kinetic model well fits the adsorption kinetics of investigated AGB-CNSs. The textural characterization and SEM revealed a mixture of mesoporous and micro porous features in the CNSs., (© 2024. The Author(s).)

A W/ZSM-5 zeolite was successfully prepared by incorporating tungsten transition metal into a zeolite structure using a conventional impregnation method. The as-obtained W/ZSM-5 zeolite was characterized using several characterization techniques such as XRD, IR and SEM-EDS. The catalyst was then applied to a cascade, single-batch reaction to synthesize bio-polyol from sunflower oils using H 2 O 2 in isopropanol solvent. The obtained results indicated that the W/ZSM-5 zeolite had high catalytic efficiency in the epoxidation of the double bond of vegetable oil and the epoxy ring opening reaction to form bio-polyol. The effect of different reaction conditions on bio-polyol synthesis, such as the dosage of the catalyst and reaction time, were investigated. Bio-polyol was obtained from sunflower oil with a hydroxyl number of 160 mg KOH per g and functionality of 2.9 OH groups per mol. The as-synthesized sunflower oil-based polyol was used to replace fossil-based polyol in the fabrication of a bio-polyurethane-based composite with high oil uptake capacity. The oil adsorption capacity of the porous polyurethane-corn stalk composite was relatively high, up to 15.07 g g -1 . In comparison with neat polyurethane and lignocellulosic materials, the new porous bio-composite had higher oil uptake capacity., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Background: Pregnant women are a vulnerable population to COVID-19 given an increased susceptibility to severe SARS-CoV-2 infection and pregnancy complications. However, few SARS-CoV-2 serological surveys have been performed among this population to assess the extent of the infection in sub-Saharan countries. The objectives of this study were to determine SARS-CoV-2 seroprevalence among Beninese pregnant women, to identify spatial seropositivity clusters and to analyse factors associated with the infection., Methods: A cross-sectional study including women in their third trimester of pregnancy attending the antenatal care (ANC) clinics at Allada (south Benin) and Natitingou (north Benin) was conducted. Rapid diagnostic tests (RDT) for detection of IgG/IgM against the SARS-CoV-2 spike protein were performed using capillary blood. Seroprevalence of SARS-CoV-2 antibodies and associations between SARS-CoV-2 serostatus and maternal characteristics were analyzed by multivariate logistic regression. Spatial analyses were performed using the spatial scan statistics to identify spatial clusters of SARS-CoV-2 infection., Results: A total of 861 pregnant women were enrolled between May 4 and June 29, 2022. 58/861 (6.7%) participants reported having received COVID-19 vaccine. None of the participants had been diagnosed with COVID-19 during their pregnancy. SARS-CoV-2 antibodies were detected in 607/802 (75.7%; 95% CI 72.56%-78.62%) of unvaccinated participants. Several urban and rural spatial clusters of SARS-CoV-2 cases were identified in Allada and one urban spatial cluster was identified in Natitingou. Unvaccinated participants from Allada with at least one previous morbidity were at a three-times higher risk of presenting SARS-CoV-2 antibodies (OR = 2.89; 95%CI 1.19%-7.00%)., Conclusion: Three out of four pregnant women had SARS-CoV-2 antibodies, suggesting a high virus circulation among pregnant women in Benin, while COVID-19 vaccination coverage was low. Pregnant women with comorbidities may be at increased risk of SARS-CoV-2 infection. This population should be prioritized for COVID-19 diagnosis and vaccination in order to prevent its deleterious effects., Trial Registration: NCT06170320 (retrospectively registered on December 21, 2023)., (© 2024. The Author(s).)

Across the life sciences, an ongoing effort over the last 50 years has made data and methods more reproducible and transparent. This openness has led to transformative insights and vastly accelerated scientific progress 1,2 . For example, structural biology 3 and genomics 4,5 have undertaken systematic collection and publication of protein sequences and structures over the past half-century, and these data have led to scientific breakthroughs that were unthinkable when data collection first began (e.g. 6 ). We believe that neuroscience is poised to follow the same path, and that principles of open data and open science will transform our understanding of the nervous system in ways that are impossible to predict at the moment. To this end, new social structures along with active and open scientific communities are essential 7 to facilitate and expand the still limited adoption of open science practices in our field 8 . Unified by shared values of openness, we set out to organize a symposium for Open Data in Neuroscience (ODIN) to strengthen our community and facilitate transformative neuroscience research at large. In this report, we share what we learned during this first ODIN event. We also lay out plans for how to grow this movement, document emerging conversations, and propose a path toward a better and more transparent science of tomorrow.

Single-atom catalysts (SACs) with active metals dispersed atomically have shown great potential in heterogeneous catalysis due to the high atomic utilization and superior selectivity/stability. Synthesis of SACs using carbon-neutral biomass and its components as the feedstocks provides a promising strategy to realize the sustainable and cost-effective SACs preparation as well as the valorization of underused biomass resources. Herein, we begin by describing the general background and status quo of carbon-based SACs derived from biomass. A detailed enumeration of the common biomass feedstocks (e.g., lignin, cellulose, chitosan, etc.) for the SACs preparation is then offered. The interactions between metal atoms and biomass-derived carbon carriers are summarized to give general rules on how to stabilize the atomic metal centers and rationalize porous carbon structures. Furthermore, the widespread adoption of catalysts in diverse domains (e.g., chemocatalysis, electrocatalysis and photocatalysis, etc.) is comprehensively introduced. The structure-property relationships and the underlying catalytic mechanisms are also addressed, including the influences of metal sites on the activity and stability, and the impact of the unique structure of single-atom centers modulated by metal/biomass feedstocks interactions on catalytic activity and selectivity. Finally, we end this review with a look into the remaining challenges and future perspectives of biomass-based SACs. We expect to shed some light on the forthcoming research of carbon-based SACs derived from biomass, manifestly stimulating the development in this emerging research area., Competing Interests: Declaration of competing interest None., (Copyright © 2024. Published by Elsevier B.V.)

Hypothesis: Electronic paper displays rely on electrokinetic effects in nonpolar solvents to drive the displacement of colloidal particles within a fluidic cell. While Electrophoresis (EP) is a well-established and frequently employed phenomenon, electro-osmosis (EO), which drives fluid flow along charged solid surfaces, has not been studied as extensively. We hypothesize that by exploiting the interplay between these effects, an enhanced particle transport can be achieved., Experiments: In this study, we experimentally investigate the combined effects of EP and EO for colloidal particles in non-polar solvents, driven by an electric field. We use astigmatism micro-particle tracking velocimetry (A-μPTV) to measure the motion of charged particles within model fluidic cells. Using a simple approach that relies on basic fluid flow properties we extract the contributions due to EP and EO, finding that EO contributes significantly to particle transport. The validity of our approach is confirmed by measurements on particles with different magnitudes of charge, and by comparison to numerical simulations., Findings: We find that EO flows can play a dominant role in the transport of particles in electrokinetic display devices. This can be exploited to speed up particle transport, potentially yielding displays with significantly faster switching times., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Environment-friendly and biodegradable packaging materials have attracted widespread attention. Development of green solutions to extend the fruit shelf life and address fruit preservation thus has a far-reaching impact. In this study, high-barrier white cardboard (WC) was prepared by a facile coating method. Compared with the WC substrate, the WVP value of the polyvinylidene chloride (PVDC) emulsion-coated WC (3.46 × 10 -11 g m m -2 s -1 kPa -1 ) decreased 73.8% and the OP value (14.8 cm 3 m -2 day -1 ·Pa -1 ) decreased 61.9%. In addition, the mechanical properties of the PVDC emulsion-coated WC increased significantly. The weight loss rate and decay rate of the stored fruits packaged with PVDC emulsion-coated WC decreased by about 5%. The high barrier PVDC emulsion-coated WC with excellent mechanical properties, good barrier effect, and preservation function was successfully prepared. Benefitting from these investigated characteristics, the obtained coated WC can be used to package fruits to reduce water loss and delay ripening, and thus extend their shelf life, exhibiting a favorable effect on blueberry and grape storage. Overall, the fabricated eco-friendly coated white cardboard has shown great potential for biodegradable packaging applications. We believe the current work presents an approach to address perishable fruit preservation and provide a supplement alternative., Competing Interests: The authors declare no conflict of interest., (This journal is © The Royal Society of Chemistry.)

The antibacterial characteristics of graphene oxide (GO-SB) nano-sheets generated by charring sugarcane bagasse (SB) are described in this study. The antibacterial capability of GO-SB was improved when it was grafted with ethyl cellulose (EC) and polyvinyl alcohol (PVA) to form GO-SB/EC/PVA hydrogels. Characterization of GO-SB nanosheets and GO-SB/EC/PVA hydrogels was accomplished by using FTIR, SEM, XRD, and thermal studies. The antimicrobial activity was carried out against Gram positive bacteria [Micrococcus leutus & Staphylococcus aureus], Gram negative bacteria [Escherichia coli, Pseudomonas aeruginosa] and pathogenic fungal yeast [Candida albicans] applying the disc diffusion method. The disc diffusion method results showed that the improved GO-SB/EC/PVA exhibited a reasonable level of antimicrobial capability against Micrococcus leutus, demonstrating that the antimicrobial improvement of GO-SB was more effective in the GO-SB/EC/PVA hydrogels by increasing the inhibition zone of Gram-positive bacteria, Micrococcus leutus from (13.0 to 16.0 mm)., (© 2024. The Author(s).)

High-sensitivity strain sensing elements with a wide strain range, fast response, high stability, and small sensing areas are desirable for constructing strain sensor arrays with high temporospatial resolution. However, current strain sensors rely on crack-based conductive materials having an inherent tradeoff between their sensing area and performance. Here, we present a molecular-level crack modulation strategy in which we use layer-by-layer assembly to introduce strong, dynamic, and reversible coordination bonds in an MXene and silver nanowire-matrixed conductive film. We use this approach to fabricate a crack-based stretchable strain sensor with a very small sensing area (0.25 mm 2 ). It also exhibits an ultrawide working strain range (0.001-37%), high sensitivity (gauge factor ~500 at 0.001% and >150,000 at 35%), fast response time, low hysteresis, and excellent long-term stability. Based on this high-performance sensing element and facile assembly process, a stretchable strain sensor array with a device density of 100 sensors per cm 2 is realized. We demonstrate the practical use of the high-density strain sensor array as a multichannel pulse sensing system for monitoring pulses in terms of their spatiotemporal resolution., (© 2024. The Author(s).)

Porphyromonas gingivalis is crucial for the pathogenesis of periodontitis. This research investigated the effects of the fruit-derived flavonoid phloretin and its analogs on the growth of pure P. gingivalis and the flora of P. gingivalis mixed with the symbiotic oral pathogens Fusobacterium nucleatum and Streptococcus mitis . The results showed that the tested flavonoids had little effect on the biofilm amount of pure P. gingivalis , but significantly reduced the biofilm amount of mixed flora to 83.6~89.1%. Biofilm viability decreased to 86.7~92.8% in both the pure- and mixed-bacterial groups after naringenin and phloretin treatments. SEM showed that phloretin and phlorizin displayed a similar and remarkable destructive effect on P. gingivalis and the mixed biofilms. Transcriptome analysis confirmed that biofilm formation was inhibited by these flavonoids, and phloretin significantly regulated the transcription of quorum sensing. Phlorizin and phloretin reduced AI-2 activity to 45.9% and 55.4%, respectively, independent of the regulation of related gene transcription. This research marks the first finding that these flavonoids possess anti-biofilm properties against P. gingivalis and its intricate bacterial community, and the observed performance variations, driven by structural differences, underscore the existence of intriguing structure-activity relationships.

As steric hindrance, methoxy groups are limiting the valorization of hardwood lignin. This paper reports a novel method of self-cross-linking of the syringaldehyde with activated methoxy groups (-OCH 3 ) via cross-coupling reaction to obtain thermosetting polymers for lignin-based wood adhesives. The methoxy groups of syringaldehyde have been activated via cross-coupling reaction by substituting Ar-OCH 3 with Ar-CH 2 -SiMe 3 , and dichloromethane, leading to cross-linking via methylene bridges to build a thermosetting polymer. FTIR spectra showed a decrease in the intensity of a -CH 3 and -OH group, owing to the substitution of the methoxy group. 13 C NMR spectra also supported these results with the -SiMe 3 signal that disappeared after the cross-linking reaction. Furthermore, cross-linking between the activated methoxy groups was confirmed with a strong exothermic peak at 130 °C, resulting in an increase in the adhesion strength as hot-pressing temperature increased from 160 to 180 °C. These results suggest that the cross-linking between the activated methoxy groups of syringaldehyde is an important understanding of valorizing hardwood lignin via building thermosetting polymers for lignin-based adhesives., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Guided nanowires grown on polymer surfaces facilitate their seamless integration as flexible devices without post-growth processing steps. However, this is challenging due to the inability of polymer films to provide the required lattice-matching effect. In this work, this challenge is addressed by replicating highly aligned nanogrooves from a compact disc (CD) onto a casted flexible polydimethylsiloxane (PDMS) surface. Leveraging the replicated nanogrooves, copper hexadecafluorophthalocyanine (F 16 CuPc) and various metal phthalocyanines are guided into large-area, self-aligned nanowires. Subsequently, by employing specifically designed shadow masks during electrode deposition, these nanowires are seamlessly integrated as either a monolithic flexible photodetector with a large sensing area or on-chip flexible photodetector arrays. The resulting flexible photodetectors exhibit millisecond and long-term stable response to UV-vis-NIR light. Notably, they demonstrate exceptional bending stability, retaining stable and sensitive photoresponse even at a curvature radius as low as 0.5 cm and after enduring 1000 bending cycles. Furthermore, the photodetector array showcases consistent sensitivity and response speed across the entire array. This work not only proves the viability of guided nanowire growth on flexible polymer surfaces by replicating CD nanogrooves but also underscores the potential for large-scale monolithic integration of guided nanowires as flexible devices., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Iron-nitrogen co-doped carbon materials as heterogeneous catalysts have attracted much attention in advanced oxidation processes involving peroxymonosulfate (PMS) due to their unique structure and enormous catalytic potential. However, there is limited research on the influence of different coordination structures on the central iron atoms. Through simple pyrolysis, we introduced oxygen atoms into the Fe-N coordination structure, constructing Fe-N/O@C catalysts with Fe-N 2 O 2 coordination structure, and achieved efficient degradation of bisphenol A (BPA). Quenching experiments, electron paramagnetic resonance, and electrochemical analysis indicate that compared to the free radical activation pathway of Fe-N@C, high-valent iron-oxo species (≡Fe(Ⅳ) = O) are the main reactive oxygen species (ROS) in the Fe-N/O@C/PMS system. Meanwhile, we compared the differences in the oxidation states of Fe atoms and electron density in different coordination structures, revealing the formation of high-valent iron-oxo species and the mechanism of interfacial electron transfer. Therefore, this study provides new insights into the design and development of Fe-N co-doped catalysts for resource-efficient and environmentally friendly catalytic oxidation systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Anionic carboxylated cellulose nanofibers (CNF) are effective media to remove cationic contaminants from water. In this study, sustainable cationic CNF-based adsorbents capable of removing anionic contaminants were demonstrated using a simple approach. Specifically, the zero-waste nitro-oxidization process was used to produce carboxylated CNF (NOCNF), which was subsequently converted into a cationic scaffold by crosslinking with aluminum ions. The system, termed Al-CNF, is found to be effective for the removal of fluoride ions from water. Using the Langmuir isotherm model, the fluoride adsorption study indicates that Al-CNF has a maximum adsorption capacity of 43.3 mg/g, which is significantly higher than that of alumina-based adsorbents such as activated alumina (16.3 mg/g). The selectivity of fluoride adsorption in the presence of other anionic species (nitrate or sulfate) by Al-CNF at different pH values was also evaluated. The results indicate that Al-CNF can maintain a relatively high selectivity towards the adsorption of fluoride. Finally, the sequential applicability of using spent Al-CNF after the fluoride adsorption to further remove cationic contaminant such as Basic Red 2 dye was demonstrated. The low cost and relatively high adsorption capacity of Al-CNF make it suitable for practical applications in fluoride removal from water.

Subcritical water extraction (SWE) is an emerging green and efficient hydrothermal technology, that offers superior performance in active material extraction, scalability, and reduction of harsh process chemicals, in biomass conversion. Regarding biomaterials, traditional isolation methods for cellulose nanocrystals (CNCs) are reliant on harsh chemicals ( i.e. , strong acid), which are expensive with little to no recyclability. This paper explores SWE as a nanotechnology platform to produce CNCs under the principle of "less is more" - by using low content (1 wt%) of phosphoric acid under subcritical conditions. Acid-catalyzed digestion of woody biomass afforded CNCs desirable physico-chemical features that are dependent on the process parameters (temperature, pressure, and time). Process temperature had a major impact on the reduction of fiber sizes (macroscale to nanoscale), fiber degradation, and fiber coloration (white to black). Electron microscopy revealed rod-like structures, with varying particle size distribution (100-500 nm), dominated by process time. However, colloidal stability was low ( versus acid-hydrolyzed CNCs) due to the low charges on the surface of CNCs. Interestingly, vibrational spectroscopy reveals the effect of process pressure on biomass conversion to CNCs (with cellulose I structure) evidenced by Raman spectroscopy and solid-state fluorometry. The produced (bio)nanomaterials possessed a degree of crystallinity (∼70%) comparable to those produced via acid hydrolysis, with higher thermal stability, enhancing their applicability over a wide range of heat-intensive processes required for nanocomposite applications in biomedical and automotive industries, among others., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

As increasing fiber hydrophobicity can significantly improve the paper dewatering process, we found that replacing SBKP and HBKP with 0.5% superhydrophobic CPGMA can significantly improve the dewatering of paper sheets. Therefore, it can be concluded that if CPGMA has little effect on paper properties, it will have potential industrial value in the papermaking industry. Consequently, it is necessary to further study the effect of the CPGMAs@CPAM/SiO 2 /APAM system on paper properties. To evaluate the application potential of the system in the papermaking industry, we investigated the effects of CPGMAs, which replaced the fibers in the stocks, on the paper properties in the CPAM/SiO 2 /APAM system. The findings demonstrate that as the CPGMA replacement increased, the paper's tensile strength, bursting strength, tear resistance, and folding endurance all declined. The trend can be segmented into two phases: a rapid decrease for substitution amounts below 0.5% and a gradual decline for substitution amounts exceeding 0.5%. When replaced with a small amount of CPGMAs, there was a negligible effect on these properties. Second, the paper air permeability increased with the CPGMA substitution amount in the stock. Furthermore, the trend of paper air permeability can be divided into two stages-a rapid stage with a substitution amount of <0.5% and a slow stage with a substitution amount of >0.5%. A small amount of CPGMAs could distinctly improve the paper's air permeability. Third, CPGMAs, which replaced fibers in the stock, minutely affected the paper formation. A small amount of CPGMAs substantially boosted the efficacy of the process of paper manufacture and certain characteristics of the paper, and it had a negligible impact on the strength of paper. The CPGMAs@CPAM/SiO 2 /APAM technology has the potential to improve the retention and filtration performance of CPAM/SiO 2 /APAM.

Introduction: Persistent endodontic infections (PEIs) mediated by bacterial biofilm mainly cause persistent periapical inflammation, resulting in recurrent periapical abscesses and progressive bone destruction. However, conventional root canal disinfectants are highly damaging to the tooth and periodontal tissue and ineffective in treating persistent root canal infections. Antimicrobial materials that are biocompatible with apical tissues and can eliminate PEIs-associated bacteria are urgently needed., Methods: Here, ε-poly (L-lysine) derived carbon quantum dots (PL-CQDs) are fabricated using pyrolysis to remove PEIs-associated bacterial biofilms., Results: Due to their ultra-small size, high positive charge, and active reactive oxygen species (ROS) generation capacity, PL-CQDs exhibit highly effective antibacterial activity against Enterococcus faecalis ( E. faecalis ), which is greatly dependent on PL-CQDs concentrations. 100 µg/mL PL-CQDs could kill E. faecalis in 5 min. Importantly, PL-CQDs effectively achieved a reduction of biofilms in the isolated teeth model, disrupting the dense structure of biofilms. PL-CQDs have acceptable cytocompatibility and hemocompatibility in vitro and good biosafety in vivo., Discussion: Thus, PL-CQDs provide a new strategy for treating E. faecalis -associated PEIs., Competing Interests: The authors declare no competing financial interest., (© 2024 Xu et al.)

Developing artificial leaves to address the environmental burden of CO 2 is pivotal for advancing our Net Zero Future. In this study, we introduce EcoLeaf, an artificial leaf that closely mimics the characteristics of natural leaves. It harnesses visible light as its sole energy source and orchestrates the controlled expansion and contraction of stomata and the exchange of petiole materials to govern the rate of CO 2 sequestration from the atmosphere. Furthermore, EcoLeaf has a cellulose composition and mechanical strength similar to those of natural leaves, allowing it to seamlessly integrate into the ecosystem during use and participate in natural degradation and nutrient cycling processes at the end of its life. We propose that the carbon sequestration pathway within EcoLeaf is adaptable and can serve as a versatile biomimetic platform for diverse biogenic carbon sequestration pathways in the future., (© 2024. The Author(s).)

Background: Psilocybin and related tryptamines have come into the spotlight in recent years as potential therapeutics for depression. Research on the mechanisms of these effects has historically focused on the direct effects of these drugs on neural processes. However, in addition to such neural effects, alterations in peripheral physiology may also contribute to their therapeutic effects. In particular, substantial support exists for a gut microbiome-mediated pathway for the antidepressant efficacy of other drug classes, but no prior studies have determined the effects of tryptamines on microbiota., Methods: To address this gap, in this preliminary study, male Long Evans rats were treated with varying dosages of oral psilocybin (0.2 or 2 mg/kg), norbaeocystin (0.25 or 2.52 mg/kg), or vehicle and their fecal samples were collected 1 week and 3 weeks after exposure for microbiome analysis using integrated 16S ribosomal DNA sequencing to determine gut microbiome composition., Results: We found that although treatment with neither psilocybin nor norbaeocystin significantly affected overall microbiome diversity, it did cause significant dose- and time-dependent changes in bacterial abundance at the phylum level, including increases in Verrucomicrobia and Actinobacteria , and decreases in Proteobacteria ., Conclusion and Implications: These preliminary findings support the idea that psilocybin and other tryptamines may act on the gut microbiome in a dose- and time-dependent manner, potentially identifying a novel peripheral mechanism for their antidepressant activity. The results from this preliminary study also suggest that norbaeocystin may warrant further investigation as a potential antidepressant, given the similarity of its effects to psilocybin., Competing Interests: J. Andrew Jones is a significant stakeholder at PsyBio Therapeutics. PsyBio Therapeutics has licensed tryptamine biosynthesis-related technology from Miami University. J. Andrew Jones and Matthew S. McMurray are co-inventors on several patent applications related to tryptamine biosynthesis and the impacts of tryptamines on animal behavior. All other authors declare no conflicts of interest., (© 2024 Xu et al.)

Despite the rapid development of mobile health based on wearable devices in recent years, lack of access to biochemical detection remains a vital challenge for most commercial wearable devices, which hinders the provision of effective electronic health records (EHRs) for disease control strategies, and further constraining the development of personalized precision medicine. Herein, we propose a strategy to graft biochemical detection function onto commercial bracelet. Different from the conventional development process of designing a completely new wearable biochemical device, we prefer to upgrade existing commercial wearable device to achieve simpler, faster, and more effective research and commercialization processes. An affordable and user-friendly biochemical button module has been designed that enables to integrate sensitive, specific, and rapid biochemical detection function into the idle space on the strap of the bracelet without increasing the size of the main body. This "Smart Bracelet Plus" shows the ability to simultaneously monitor physical and biochemical signals, and will serve as a reliable and systematic personal diagnostics and monitoring platform for providing real-time EHRs for disease control strategies and improving the efficiency of the healthcare system., Competing Interests: Declaration of competing interest Xunshun Tao have a significant interest in Nanjing Ziqishun Biotechnology Co., Ltd, a company that have a commercial interest in the detailed mechanical and electrical design of this system. The potential individual conflict of interest has been reviewed and managed by South China University of Technology. Junhao Chen and Junfei Tian have potential interest in the results of this research and technology. Other authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Butyl butyrate is a short-chain fatty acid ester (C8) with a fruity aroma. It has broad prospects in the fields of foods, cosmetics and biofuels. At present, butyl butyrate is produced by chemical synthesis in the industry, but it is highly dependent on petroleum-based products. The growing concerns regarding the future scarcity of fossil fuels have been strongly promoted the transition from traditional fossil fuels and products to renewable bioenergy and biochemicals. Therefore, it is necessary to develop a green biochemical technology to replace traditional petroleum-based materials. In recent years, microorganisms such as Escherichia coli and Clostridium have been engineered to serve as cell factories for the sustainable one-pot production of short-chain fatty acid esters, including butyl butyrate. This opinion highlights the recent development in the use of lipases and alcohol acyltransferases (AATs) for butyl butyrate production in microbial fermentation, as well as future perspectives., (© 2024 The Author(s). Microbial Biotechnology published by John Wiley & Sons Ltd.)

Photo-rechargeable zinc-ion batteries (PRZIBs) have attracted much attention in the field of energy storage due to their high safety and dexterity compared with currently integrated lithium-ion batteries and solar cells. However, challenges remain toward their practical applications, originating from the unsatisfactory structural design of photocathodes, which results in low photoelectric conversion efficiency (PCE). Herein, a flexible MoS 2 /SnO 2 -based photocathode is developed via constructing a sunflower-shaped light-trapping nanostructure with 3D hierarchical and self-supporting properties, enabled by the hierarchical embellishment of MoS 2 nanosheets and SnO 2 quantum dots on carbon cloth (MoS 2 /SnO 2 QDs@CC). This structural design provides a favorable pathway for the effective separation of photogenerated electron-hole pairs and the efficient storage of Zn 2+ on photocathodes. Consequently, the PRZIB assembled with MoS 2 /SnO 2 QDs@CC delivers a desirable capacity of 366 mAh g -1 under a light intensity of 100 mW cm -2 , and achieves an ultra-high PCE of 2.7% at a current density of 0.125 mA cm -2 . In practice, an integrated battery system consisting of four series-connected quasi-solid-state PRZIBs is successfully applied as a wearable wristband of smartwatches, which opens a new door for the application of PRZIBs in next-generation flexible energy storage devices., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

In this study, three sequencing batch biofilter granular reactors (SBBGRs) were employed to treat model lignin wastewater containing different lignin models (2,6-dimethoxyphenol, 4-methoxyphenol, and vanillin). After 40 days of cultivation, uniform-shaped aerobic granular sludge (AGS) was successfully developed through nutrient supplementation with synthetic wastewater. During the acclimation stage, the chemical oxygen demand (COD) reduction efficiencies of the three reactors showed a trend of initial decreasing (5-20%) and then recovering to a high reduction efficiency (exceeding 90%) in a short period of time. During the stable operation stage, all three reactors achieved COD reduction efficiencies exceeding 90%. These findings indicated the cultivated AGS's robust resistance to changes in lignin models in water. UV-Vis spectra analysis confirmed the effective degradation of the three lignin models. Microbiological analysis showed that Proteobacteria and Bacteroidetes were always the dominant phyla. At the genus level, while Acinetobacter (15.46%) dominated in the inoculation sludge, Kapabacteriales (7.93%), SBR1031 (11.77%), and Chlorobium (25.37%) were dominant in the three reactors (for 2,6-dimethoxyphenol, 4-methoxyphenol, and vanillin) after degradation, respectively. These findings demonstrate that AGS cultured with SBBGR effectively degrades lignin models, with different dominant strains observed for various lignin models., Competing Interests: The authors declare there is no conflict., (© 2024 The Authors This is an Open Access article distributed under the terms of the Creative Commons Attribution Licence (CC BY 4.0), which permits copying, adaptation and redistribution, provided the original work is properly cited (http://creativecommons.org/licenses/by/4.0/).)

Ti-based Metal-organic frameworks (Ti-MOF) have been extensively investigated for producing hydrogen via solar water splitting, while their intrinsic activities are still retarded by the poor performance of photocarriers separation and utilization. Herein, a donor-acceptor (D-A) supramolecular photocatalyst is successfully constructed via encapsulating fullerene (C 60 ) into MIL-125-NH 2 and meanwhile depositing individual Pt atoms as cocatalyst. The as-prepared C 60 @MIL-125-NH 2 -Pt exhibits remarkable activity in photocatalytic water splitting, with a H 2 formation rate of 1180 μmol g -1 h -1 , which is ∼ 12 times higher than that of the pristine MIL-125-NH 2 . Further investigations indicate that the host-guest interactions between C 60 and MIL-125-NH 2 strengthen the built-in electric field, which greatly facilitates the separation and migration of photogenerated charge carriers. In addition, the cocatalyst of individual Pt atoms not only further promotes the separation and transport of carriers but also enhances the contact between water and the catalyst. All of these factors directly contribute to the superior activity of C 60 @MIL-125-NH 2 -Pt. This work provides a new perspective for constructing D-A supramolecular photocatalysts for enhanced charge separation and making full use of photoelectrons to realize efficient hydrogen production., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

The green synthesis strategy for cellulose-containing hydrogel electrolytes is significant for effectively managing resources, energy, and environmental concerns in the contemporary world. Herein, we propose an all-green strategy using AlCl 3 /ZnCl 2 /H 2 O solvent to create cellulose/polyacrylamide-based hydrogel (AZ-Cel/PAM) with expanded hierarchical topologies. The aqueous AlCl 3 /ZnCl 2 facilitates the efficient dissolution of cellulose at room temperature, and the dispersed Al 3+ -Zn 2+ ions autocatalytic system catalyzes in-situ polymerization of acrylamide (AM) monomer. This expands the AM network within the cellulose framework, forming multiple bonding interactions and stable ion channels. The resulting hybrid hydrogel exhibits improved mechanical properties (tensile strength of 56.54 kPa and compressive strength of 359.43 kPa) and enhanced ionic conductivity (1.99 S/m). Furthermore, it also demonstrates excellent adhesion, freeze resistance (-45 °C), and water retention capabilities. Quantum simulations further clarify the mechanical composition and ion transport mechanism of AZ-Cel/PAM hydrogels. The assembled supercapacitor with the hydrogel electrolyte, demonstrates an ideal area-specific capacitance of 203.80 mF/cm 2 . This all-green strategy presents a novel approach to developing sustainable energy storage devices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

The production of hydrogen through seawater electrolysis has recently garnered increasing concern. However, hydrogen evolution reaction (HER) by alkaline seawater electrocatalysis is severely impeded by the slow H 2 O adsorption and H* binding kinetics at industrial current densities. Herein, a face-centered cubic/hexagonal close packed (fcc/hcp) NiRu alloy heterojunction was fabricated on Ni foam (N doped NiRu-inf/NF) by a low-temperature nitrogen plasma activation. Simultaneously, nitrogen atoms are introduced into the alloy to facilitate d-p hybridization. When N doped NiRu-inf/NF is integrated into a dual-electrode cell for urea-assisted seawater electrolysis, it achieves 100 mA cm -2 with an ultra-low voltage of 1.36 V and excellent stability. Density functional theory (DFT) verifies that the robust d-p hybridization among Ni, Ru and N exhibits more energy level matching for H 2 O molecule adsorption at the Ru sites, while simultaneously reducing the interaction between H* and Ni sites in N-doped NiRu-inf., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

Robust, conductive and flexible electrode materials have been the focus of attention in portable, wearable electronics. However, it is still a significant challenge to achieve synergistic development of multiple properties simultaneously. Herein, we propose a combination of microscale design and nanostructures strategy to prepare MXene/cellulose nanofiber-poly (3,4-ethylenedioxythiphoenes):polystyrene sulfonate (Ti 3 C 2 T x /CNF-PEDOT:PSS, TC-P) hybrid film by a simple in-situ polymerization and vacuum filtration process. CNF serves as the supporting skeleton of PEDOT:PSS, effectively mitigating its self-aggregation and structural deformation due to the expansion/contraction of the polymer network. And the CNF-PEDOT:PSS composite is capable to open up the interlayer space of Ti 3 C 2 T x , which reduces the self-stacking of Ti 3 C 2 T x nanosheets. The strong interactions among the three components enable the hybrid film electrode to possess both flexibility and high electrochemical properties. As a result, the film electrode exhibits a remarkable tensile strength of 77.4 MPa and an excellent conductivity of 162.5 S cm -1 , as well as an outstanding areal specific capacitance of 896 mF cm -2 at 4 mA cm -2 . Moreover, the assembled symmetric supercapacitor (SSC) device displays a large areal energy density of 62 µWh cm -2 at a power density of 800 µW cm -2 and demonstrates a long cycle life with 85.1 % capacitance retention after 10,000 GCD cycles. This study provides an effective strategy to balance mechanical flexibility and electrochemical properties, providing an inspiration to prepare flexible electrodes that are widely applied in a new generation of portable, wearable electronics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Polymers have become an important part of everyday life, but most of the polymers currently used are petroleum-based. This poses an environmental problem, especially with respect to products that are quickly discarded. For this reason, current packaging development focuses on sustainable materials as an alternative to synthetic ones. Nanocellulose, a relatively new material derived from cellulose, has unique properties such as high strength, low density, high surface area, and good barrier properties, making it popular in various applications. Additionally, 3D printing technologies have become an important part of industrial and commercial processes, enabling the realization of innovative ideas and functionalities. The main aim of this research was to develop a hydrogel of bacterial nanocellulose with suitable rheological properties for the 3D printing of polymer foils. Three variations of bacterial nanocellulose hydrogel differing in ratios of bacterial nanocellulose to cationic starch were produced. The rheological studies confirmed the suitability of the hydrogels for 3D printing. Foils were successfully 3D-printed using a modified 3D printer. The physical-mechanical, surface, and optical properties of the foils were determined. All foils were homogeneous with adequate mechanical properties. The 3D-printed foils with the highest amount of cationic starch were the most homogeneous and transparent and, despite their rigidity, very strong. All foils were semi-transparent, had a non-glossy surface, and retained poor water wettability.

The aim of this work was to develop and characterize a thin films composed of hyaluronic acid/ellagic acid for potential medical application. Its principal novelty, distinct from the prior literature in terms of hyaluronic acid films supplemented with phenolic acids, resides in the predominant incorporation of ellagic acid-a distinguished compound-as the primary constituent of the films. Herein, ellagic acid was dissolved in two different solvents, i.e., acetic acid (AcOH) or sodium hydroxide (NaOH), and the surface properties of the resultant films were assessed using atomic force microscopy and contact angle measurements. Additionally, various physicochemical parameters were evaluated including moisture content, antioxidant activity, and release of ellagic acid in phosphate buffered saline. Furthermore, the evaluation of films' biocompatibility was conducted using human epidermal keratinocytes, dermal fibroblasts, and human amelanotic melanoma cells (A375 and G361), and the antimicrobial activity was elucidated accordingly against Staphylococcus aureus ATCC 6538 and Pseudomonas aeruginosa ATCC 15442. Our results showed that the films exhibited prominent antibacterial properties particularly against Staphylococcus aureus , with the 80HA/20EA/AcOH film indicating the strong biocidal activity against this strain leading to a significant reduction in viable cells. Comparatively, the 50HA/50EA/AcOH film also displayed biocidal activity against Staphylococcus aureus . This experimental approach could be a promising technique for future applications in regenerative dermatology or novel strategies in terms of bioengineering.