Search

Nanowires, nanofibers and nanotubes have been widely used as the building blocks in micro/nano-electromechanical systems, energy harvesting or storage devices, and small-scaled measurement equipment. We report that the surface effects of these nanobeams have a great impact on their deflection and internal forces. A simply supported nanobeam is taken as an example. For the displacement and shear force of the nanobeam, its dangerous sections are different from those predicted by the conventional beam theory, but for the bending moment, the dangerous section is the same. Moreover, the values of these three quantities for the nanobeam are all distinct from those calculated from the conventional beam model. These analyses shed new light on the stiffness and strength check of nanobeams, which are beneficial to engineer new-types of nano-materials and nano-devices. [ABSTRACT FROM AUTHOR]

Phonon sidebands in the electrolumiescence (EL) spectra of InGaN/GaN multiple quantum well blue light emitting diodes are investigated. S-shaped injection current dependence of the energy spacing (ES) between the zero-phonon and first-order phonon-assisted luminescence lines is observed in a temperature range of 100–150 K. The S-shape is suppressed with increasing temperature from 100 to 150 K, and vanishes at temperature above 200 K. The S-shaped injection dependence of ES at low temperatures could be explained by the three stages of carrier dynamics related to localization states: (i) carrier relaxation from shallow into deep localization states, (ii) band filling of shallow and deep localization states, and (iii) carrier overflow from deep to shallow localization states and to higher energy states. The three stages show strong temperature dependence. It is proposed that the fast change of the carrier lifetime with temperature is responsible for the suppression of S-shaped feature. The proposed mechanisms reveal carrier recombination dynamics in the EL of InGaN/GaN MQWs at various injection current densities and temperatures. [ABSTRACT FROM AUTHOR]

InGaN-based green light-emitting diodes (LEDs) with different green quantum well numbers grown on Si (111) substrates by metal organic chemical vapor deposition are investigated. It is observed that V-shaped pits appear in the AFM images with the green quantum well number increasing from 5 to 9, and results in larger reverse-bias leakage current. Meanwhile, in the case of the sample with the number from 5 to 7 then to 9, the external quantum efficiency increases firstly, and then decreases. These phenomena may be related to the size of V-shaped pits in the active area and the distribution of electrons and holes in the active area caused by V-shaped pits. The optimal number of green quantum wells is determined to be 7. [ABSTRACT FROM AUTHOR]

A blue emission originated from InGaN/GaN superlattice (SL) interlayer is observed in the yellow LEDs with V-pits embedded in the quantum wells (QWs), revealing that sufficient holes have penetrated through the QWs into SLs far away from the p-type layer. In the V-pits embedded LEDs, hole transport has two paths: via the flat c-plane region or via the sidewalls of V-pits. It is proved that the holes in SLs are injected from the sidewalls of V-pits, and the transportation process is significantly affected by working temperature, current density, and the size of V-pits. Four motion possibilities are discussed when the holes flow via the sidewalls. All these may contribute to a better understanding of hole transport and device design. [ABSTRACT FROM AUTHOR]

Effect of hydrogen (H2) treatment during the GaN barrier growth on the electroluminescence performance of green InGaN/GaN single-quantum-well light-emitting diodes (LEDs) grown on Si substrates is experimentally investigated. We prepare two LED samples with different carrier gas compositions during the growth of GaN barrier. In the H2free LED, the GaN barrier is grown in full nitrogen (N2) atmosphere. For the other H2treated LED, a mixture of N2and H2was used as the carrier gas. It is observed that V-shaped pits decrease in size after H2treatment by means of the scanning electron microscope. Due to the fact that the p–n junction interface would be closer to the p-GaN as a result of smaller V-shaped pits, the tunneling barrier for holes to inject into the InGaN quantum well would become thicker after H2treatment. Hence, the external quantum efficiency of the H2treated LED is lower compared to the H2free LED. However, LEDs would exhibit a better leakage behavior after H2treatment during the GaN barrier growth because of more effective blocking of the threading dislocations as a result of the H2etching at V-shaped pits. [ABSTRACT FROM AUTHOR]

InGaN-based green light-emitting diodes (LEDs) with and without Mg-preflow before the growth of p-AlGaN electron blocking layer (EBL) are investigated experimentally. A higher Mg doping concentration is achieved in the EBL after Mg-preflow treatment, effectively alleviating the commonly observed efficiency collapse and electrons overflowing at cryogenic temperatures. However, unexpected decline in quantum efficiency is observed after Mg-preflow treatment at room temperature. Our conclusions are drawn such that the efficiency decline is probably the result of different emission positions. Higher Mg doping concentration in the EBL after Mg-preflow treatment will make it easier for a hole to be injected into multiple quantum wells with emission closer to p- GaN side through the c-plane rather than the V-shape pits, which is not favorable to luminous efficiency due to the preferred occurrence of accumulated strain relaxation and structural defects in upper QWs closer to p-GaN. Within this framework, apparently disparate experimental observations regarding electroluminescence properties, in this work, are well reconciled. [ABSTRACT FROM AUTHOR]

InGaN-based green light-emitting diodes (LEDs) with different growth temperatures of superlattice grown on Si (111) substrates are investigated by temperature-dependent electroluminescence between 100 K and 350 K. It is observed that with the decrease of the growth temperature of the superlattice from 895°C to 855°C, the forward voltage decreases, especially at low temperature. We presume that this is due to the existence of the larger average size of V-shaped pits, which is determined by secondary ion mass spectrometer measurements. Meanwhile, the sample with higher growth temperature of superlattice shows a severer efficiency droop at cryogenic temperatures (about 100 K–150 K). Electron overflow into p-GaN is considered to be the cause of such phenomena, which is relevant to the poorer hole injection into multiple quantum wells and the more reduced effective active volume in the active region. [ABSTRACT FROM AUTHOR]