Search

This paper presents a digital readout integrated circuit (DROIC) for small pitch medium-wave infrared (MWIR) starring focal plane arrays (FPAs). To overcome the limited in-pixel resolution of such DROICs, the concept of error shaping is introduced in pulse frequency modulation (PFM)-based pixels. Multiple integration operations are performed in a single frame and the residue charge from each integration phase is retained and injected into the next charge packet. This over-integration routine provides a high pass noise transfer function (NTF) equivalent to what is obtained in a first order sigma delta modulator. The concise structure of a PFM analog-to-digital converter (ADC) lends itself well to such an operation inside the pixel, while consuming low power. Along with a theoretical analysis of the technique, a prototype based on a $16\times 16$ array and sinc decimation filters is developed to demonstrate the performance of the proposed DROIC. With an in-pixel resolution of 5 bits and over-integration ratio (OIR) of 128, 395 noise electrons are demonstrated at full-well fill from the test array fabricated in a 90 nm bulk-CMOS process. [ABSTRACT FROM AUTHOR]

This paper presents an overview for low-power successive approximation register (SAR) analog-to-digital converters (ADCs). It covers the operation principle, error analysis, and practical design issues. Furthermore, this paper provides a comprehensive survey of state-of-the-art low-power design techniques for every circuit block in the SAR ADC, including comparator, capacitive digital-to-analog converter (DAC), and SAR logic. The goal of this paper is to provide a useful overview to SAR ADC designers who want to improve the energy efficiency targeting low-to-medium speed applications. [ABSTRACT FROM AUTHOR]

Clock skew and component mismatches in continuous-time DACs introduce two types of error: static error and dynamic error. Both types of error typically limit the performance of practical, high-resolution, and continuous-time DACs, but most prior calibration techniques primarily reduce only static error. An exception is a recently published mismatch noise cancellation (MNC) technique that adaptively measures and cancels both types of error over the DAC’s first Nyquist band. However, a disadvantage of the technique is that it requires an oversampling ADC that operates at several times the DAC’s Nyquist rate to prevent convergence error that would otherwise be caused by aliasing. This paper presents a sub-sampling version of the MNC technique that avoids this limitation at the expense of a lower calibration convergence rate. As proven in the paper, the subsampling MNC technique allows aliasing to occur, but in such a way that convergence error is avoided. [ABSTRACT FROM AUTHOR]

This paper presents a 1.5-GS/s 6-bit single-channel loop-unrolled successive approximation register (SAR) analog-to-digital converter (ADC) using speculative capacitive DAC (CDAC) switching control technique. The proposed SAR ADC achieves a high sampling rate by eliminating additional delays in typical loop-unrolled SAR ADCs related to settling time constraints in their CDACs. Specifically, the CDACs are duplicated and controlled in speculative ways so that the CDAC outputs passage to their next values before completing the regeneration operation of comparators, thereby improving timing constraints for successive approximations. The switching power overhead from the CDAC speculation is mitigated by introducing an energy-efficient CDAC control technique that produces desired voltage transients with minimal power overheads. The prototype of the proposed SAR ADC is fabricated in a 28-nm CMOS technology and occupies an active area of 0.0038-mm2. The design consumes 5.8 mW from a 1.2-V supply. The ADC achieves 1.5-GS/s sampling frequency with a 31-dB SNDR at a low input frequency and a 28.6 dB at the Nyquist frequency without applying any offset calibration techniques, achieving the highest sampling frequency among the 6-bit single-channel loop-unrolled SAR ADCs reported. [ABSTRACT FROM AUTHOR]

In recent years, fast computation, low power, and small footprint are the key motivations for building SNN hardware. The unique features of SNN hardware have not been fully exploited, where the computation speed and energy efficiency of the SNN hardware can be improved according to the sparse spiking and non-uniform traffic of SNN. In this paper, we propose a 5.28-mm $^{2}~4096$ -neuron 1M-synapse energy-efficient digital SNN hardware that can achieve ultra-low energy per synaptic operation of 4.5 pJ. The proposed neuron computing unit is implemented in pipeline architecture to achieve high synaptic processing speed. The proposed spike processing unit can significantly increase the processing speed of the neuron core by $1.9\times $ and $9.4\times $ when the spike injection rate is 50% and 10%, respectively. Besides, the increase in the processing speed of the neuron core leads to a reduction in energy consumption of up to 81.5%. An event-driven clock gating circuit that can reduce the power consumption of the proposed neuron block by more than 70% is proposed in this paper. This paper proposes a supervised STDP+ algorithm for SNN training, and the classification accuracy of the MNIST digits is 89.6% with 73.6% weight sparsity of the output layer. [ABSTRACT FROM AUTHOR]

Injection-locked ring oscillators (ILROs) are widely used for quadrature clock generators (QCG) in multi-lane wireline or optical transceivers because of their low power, low area, and technology scalability. However, locking a four-stage I/Q oscillator with a two-phase injection signal generates imbalances in amplitude and phase, resulting in I/Q phase errors and degraded jitter performance. This paper proposes a modified frequency-domain analysis with amplitude constraint for even-phase ILROs. Combining theoretical derivations with simulation results in 28nm CMOS technology, the behaviors of ring oscillators with partial injection and ILRO-based QCG are discussed and concluded. [ABSTRACT FROM AUTHOR]

Inadvertent but inevitable mismatches among nominally identical unit element 1-bit digital-to-analog converters (DACs) within a multi-bit Nyquist-rate DAC cause both static and dynamic error in the DAC’s continuous-time output waveform. Prior calibration techniques are able to suppress static mismatch error, but have had limited success in suppressing dynamic mismatch error. This paper presents a digital calibration technique that adaptively measures and cancels both static and dynamic mismatch error over the DAC’s first Nyquist band. The technique is capable of either foreground or background operation, and is relatively insensitive to non-ideal circuit behavior. The paper presents a rigorous mathematical analysis of the technique, and demonstrates the results of the paper with both behavioral and transistor-level circuit simulations. [ABSTRACT FROM PUBLISHER]

As new applications impose jitter values in the range of a few tens of femtoseconds, the design of phase-locked loops faces daunting challenges. This paper derives basic relations between the tolerable jitter and the power consumption, predicting severe issues as jitters below 10 fs are sought. The results are also applied to the sampling clocks in analog-to-digital converters and suggest that clock generation may consume a greater power than the converter itself. [ABSTRACT FROM AUTHOR]

This paper presents simple but accurate expressions for the noise components caused by clock jitter, in the output signal of self-oscillating sigma delta modulators (SOSDM). Contrary to conventional continuous time sigma delta modulators (CTSDM), the SOSDM's loop contains a strong oscillation, whose attribution to the system's jitter caused noise has not previously been explored. In this paper, the SOSDM system is modeled, and the effect of the self oscillation, the input signal and the quantization noise on the jitter caused noise in the output signal, is calculated. Results are confirmed by system level simulations. [ABSTRACT FROM AUTHOR]

A 0.6-V 100-mA fully-integrated digital low-dropout regulator (DLDO) with adaptive current step size control is presented in this paper. By dividing the main power PMOSs into ten blocks with different unit-cell sizes, the proposed DLDO can turn-on/-off small power PMOSs in light load and large ones in heavy load conditions. High regulation accuracy in a wide load range and fast transient response are hence achieved. In addition, an auxiliary power MOS block, which consists of both PMOS and NMOS transistors, is adopted to eliminate the limit cycle oscillation (LCO) in light load condition and to further accelerate the response speed. The proposed DLDO is fabricated in a 65-nm low-power CMOS technology with an active area of 0.17 mm2 including an on-chip output capacitor of 1nF. The measured undershoot and overshoot voltages are only 53 and 37 mV, respectively, when the load current changes between 0 and 100 mA. The quiescent current is 34.6 $\mu \text{A}$ , while the maximum current efficiency is 99.96%. [ABSTRACT FROM AUTHOR]

This paper presents an analytical method for the performance evaluation of the correlation-based impulse radio (IR) receivers, which detect the data based on synchronizing the received signal with a locally generated template pulse. In this paper, a phase interpolation technique is employed to preserve synchronization accuracy with low power consumption. The analytical method computes the spectral density of jitter at the phase interpolator output, resulting from both flicker and thermal noise components. The analysis considers the aliasing phenomenon due to the sampling of the noise to predict the induced jitter accurately. Bit error rate (BER) of the receiver is also statistically estimated in terms of the induced jitter on the template pulse, the noise effect of the receiver chain, and the template signal level. The proposed estimation procedure is validated by comparing its results with transient noise simulations. It is shown that increasing the template signal range in the correlator and improving the linearity of the phase interpolation transfer curve, at a given power consumption, enhances the receiver sensitivity by 2 and 3.5 dB, respectively. The BER estimation results also reveal that the effect of the template signal jitter on the sensitivity of the correlation-based IR receivers becomes dominant with the increasing input signal level. [ABSTRACT FROM AUTHOR]

This paper proposes a configurable direct digital frequency synthesizer (DDFS) based on the lookup-table (LUT)- rotation architecture. To break through the limitation of the single mode, the proposed DDFS is the first attempt which supports four-mode switching on chip. Taking the advantages of small LUT size and pipelined rotation, the DDFS achieves both high-speed and high-resolution properties. The multi-bit rotation tree is helpful to reduce the latency and register usage, which improves the agility and energy efficiency of the DDFS. A partition problem is raised in this paper, and we estimate the optimal solution through both the theory and experiment. Based on the partition, an output can achieve the highest spurious-free dynamic range (SFDR) with as small as possible LUT size. The functionality of the proposed DDFS has been validated in a Xilinx ZedBoard field-programmable gate array. The synthesis and layout results show that the chip achieves maximum 102-dBc SFDR and 2.2-GHz clock frequency. The power consumption and latency cycles reach minimum 6.9 mW/GHz and 7 cycles, which are 20% and 30% reduction compared with the state-of-the-art DDFS. [ABSTRACT FROM AUTHOR]

This paper presents a novel approach to analyze clock jitter influence in the performance of continuous-time sigma–delta modulators. The analysis is based on projecting all the signals and operations over an artificial time-base relative to the sampling clock, on which the sampling period can be considered constant. In the proposed time-base, clock jitter can be modeled as the modulation of the input signal frequency and the integrators gain. Unlike standard techniques, we do not rely on the feedback pulse properties, which enables a broader application of our technique to band-pass or VCO-based $\Sigma \Delta $ modulators. In this paper, we present the basic theory of this technique and its application to some practical examples, showing a good matching between prediction and numerical simulation. [ABSTRACT FROM AUTHOR]

The use of digital pulse-width modulators (DPWMs) as controllers for dc–dc converters is becoming more and more popular, due to the lower sensitivity to process variations, programmability, and easiness to translate complex control algorithm in digital architecture. DPWMs require high resolution to avoid limit cycling. Moreover, especially in high-frequency switching power converters, the reduction of the electromagnetic interference (EMI) is of primary importance. A novel DPWM circuit is proposed in this paper. The circuit uses only standard cells, easing portability to new technological nodes. The DPWM includes a coarse delay stage, based on an enhanced counter-based architecture, which is able to modulate both the frequency and duty cycle. As a result, the proposed DPWM supports spread-spectrum modulation, with arbitrary modulation law, to reduce the EMI. The DPWM also includes a fine delay stage that employs digitally controlled NAND-based delay lines with excellent linearity and resolution. A measurement unit is used to compensate at run time, the process, voltage, and temperature variations. The circuit has been fabricated in low-cost UMC 130-nm CMOS technology and is fit in a 44-pin package. The chip can generate spread-spectrum pulse-width waveforms up to 10 MHz. Measurement of the conducted EMI in buck dc–dc converter is reported in this paper. [ABSTRACT FROM AUTHOR]

Mismatches among frequency control elements in digitally-controlled oscillators can be a significant source of phase error in digital phase-locked loops (PLLs). This paper presents a multi-rate dynamic element matching technique and an adaptive mismatch-noise cancellation (MNC) technique that work together to address this problem. The two techniques operate in background during normal PLL operation, and the MNC technique has typical cold start convergence times of a few seconds. [ABSTRACT FROM AUTHOR]

The increase of clock frequency in digital circuits exacerbates the electromagnetic interference (EMI) between devices. Spread-spectrum techniques reduce the electromagnetic noise lowering harmonic peaks of the clock signal by means of frequency modulation. In System-on-Chips (SoCs) another requirement in many applications is the coexistence of both modulated and un-modulated clock domains. In these cases, suitable synchronization systems are used to allow data to cross the boundary between spread and un-spread clock domains. In this paper we present a spread-spectrum clock generator (SSCG) able to provide both spreaded and un-spreaded clocks. The spreaded clock has a specially designed modulation profile, allowing at the same time a seamless synchronization-free interface between spreaded and un-spreaded clock domains and a large EMI reduction. The paper presents the derivation of the new highly discontinuous modulation profile (that allows to achieve an EMI reduction up to 15.8dB) and implementation details of an all-digital SSCG able to provide the developed modulation waveform. A test chip has been fabricated in UMC 65nm CMOS technology, using a novel dual-output digitally controlled delay line. The circuit can generate both spread and un-spread clocks (double output mode) or the spread clock alone (single output mode). Area occupation is 0.102mm2, whereas power consumption is 48.5mW in double output mode and 34mW in single output mode. [ABSTRACT FROM AUTHOR]

In this paper, a single-channel two-step voltage-time hybrid domain analog-to-digital converter (ADC) is proposed. To achieve high sampling rate and high accuracy, 3.5-bit voltage domain MDAC and 7-bit high-speed time domain ADC (TD-ADC) are combined into a 10-bit hybrid ADC. In the first stage MDAC, a low-power push-pull amplifier is used to improve settling speed, and 1-bit redundancy is designed for calibration and dither injection. The TD-ADC with selective time domain quantization is implemented by a constant-current voltage to time converter (VTC) array and a direct positive feedback time domain comparator. The proposed VTC array can maintain high linearity with a large input swing in high-speed application. The prototype ADC was fabricated in a 28-nm CMOS process and occupied a core area of 0.074 mm2. Under a 0.95-V power supply, the chip achieves a measured peak SNDR of 53.2 dB and SFDR of 61.7 dB respectively at conversion rate up to 2.5 GS/s. The FOM is 48.2 fJ/conversion-step. [ABSTRACT FROM AUTHOR]

This paper presents a low power injection-locked oscillator (ILO)-type clock and data recovery (CDR) in 40 nm CMOS. An efficient “phase reset” scheme is proposed to periodically realign the clock phase to the rising edge of data. The frequency information is extracted by comparing the rising edge of the data and the clock after aligning the phase using a bang-bang phase detector (BBPD). Additionally, a low power injection-locked two-stage ring digitally controlled oscillator (ILDCO) is employed to provide four-phase quadrature clock and significantly reduce the power consumption. Based on the proposed architecture, the fabricated CDR consumes only 5.8 mW from a 0.9 V supply, while being able to extract the clock signal from 6.15 to 10.9 Gb/s input data with a measured jitter tolerance (JTOL) of 0.15 UIpp at the highest frequency, indicating that the CDR meets the OC-192 mask. Furthermore, the proposed CDR demonstrates a substantial improvement in the power efficiency of 0.58 pJ/bit. [ABSTRACT FROM AUTHOR]

Millimeter-wave (mmWave) RF and analog front-end circuits are very susceptible to chip process and temperature variation, which cause I/Q mismatch and DC offset. As a consequence, the system performance can be seriously degraded, especially in wideband multi-Gb/s systems. This paper proposes an online estimation and compensation in the baseband receiver end of a single carrier (SC) system for TX and RX frequency independent (FI) initial and time-varying (TV) I/Q mismatch and DC-offset. Based on specification of IEEE 802.11ay, the compensated image rejection ratio (IRR) performance of the TX and RX FI I/Q mismatch effects can be improved from 16.43 dB to 54.70 dB at SNR of 25.52 dB. Moreover, we propose a novel algorithm based on the Golay sequence for estimation and compensation to cancel TX and RX initial/TV DC-offset. The DC-offset in the I/Q channel is improved from −56.46 dB/−58.56 dB to −97.30 dB/−98.70 dB at SNR of 25.52 dB. In the hardware implementation, a four-time parallelism architecture are proposed to work at a 625 MHz clock rate with a 28-nm HPC_PLUS CMOS process under 64-QAM mode for 15 Gbps transmission. Using a clock gating control scheme for FI I/Q mismatch and DC-offset estimator, the total power of the proposed the module can be reduced from 59.5 mW to 32.7 mW. The gate count and power of the proposed estimation/compensation design are only 2.94% and 1.69% of the overall digital RX baseband gate count and power consumption. [ABSTRACT FROM AUTHOR]

Dynamic element matching (DEM) is often applied to multi-bit DACs to avoid nonlinear distortion that would otherwise result from inevitable mismatches among nominally identical circuit elements. Unfortunately, for such a DEM DAC to fully achieve this objective its constituent 1-bit DACs must be free of inter-symbol interference (ISI), i.e., the error from each 1-bit DAC must not depend on prior samples of the DAC's input sequence. This paper provides the first quantitative general analysis of the effects of ISI on the continuous-time outputs of DEM DACs. The analysis provides some surprising insights such as the conclusion that for certain types of DEM the only nonlinear distortion caused by ISI is second-order distortion. The paper also presents a digital pre-distortion technique that cancels the second-order distortion in the DEM DAC's first Nyquist band if information about the 1-bit DAC mismatches is available. [ABSTRACT FROM PUBLISHER]

Time-interleaving (TI) is a major trend for high-speed ADC designs. The major limitation of TI-ADC is the mismatches among ADC channels. Calibration techniques have been actively pursued to compensate the mismatches. In this paper, we present a new spectral calibration technique for TI-ADC. Although the technique does not run in the background, it does not need external calibration signals and has no constraint on the input signal, which is similar to blind estimation. Compared to benchmark designs, the new technique involves much less calibration hardware overhead, and calibrates all mismatches with much less time. In practice, this efficient technique can run repetitively to track the environment changes. It addresses the needs from practical TI-ADCs well. The technique is verified with extensive simulations on a 2GS/s 12-bit 16-channel ADC. With mismatch spurs over −40dBc, the technique can reliably suppress the spurs to be lower than −80dBc within about 4000 samples without the need of iteration. [ABSTRACT FROM AUTHOR]

This paper presents an area-efficient design of a column-parallel second-order digital decimation filter for a $\Sigma \Delta$ analog-to-digital converter-based CMOS image sensor. By using the proposed pre-bitwise-inversion topology having the same mathematical function, the chip area could be curtailed, where the bit-wise-inversion block, required by the correlated-double-sampling, is moved to the front of the adder. Following such a technique as this, more than six inverters and multiplexers can be reduced. This paper also proposes an adder scheme with only 118 transistors to implement the 13-bit dynamic range integrator. Moreover, the number of MSB cells inside the ripple counter is optimized to balance leakage current and active power consumption. Compared with the prior art, the proposed decimation filter core (without registers) can achieve a reduction of about 24% in transistor count. The proposed design is implemented with a 130-nm standard CMOS process. The total chip area of the digital decimation filter is only $4.5\times 145~\mu \text{m}^{2}$ per column, which is less than half area compared against the prior art. According to the post-layout simulation, the maximum operating frequency is 124 MHz, and the total power consumption, including the filter core and 13-bit registers, is less than 6.35 $\mu \text{W}$ under a typical 50-MHz clock frequency. [ABSTRACT FROM AUTHOR]

In this paper, a design method for high-order delay-lock loops (DLLs) is presented and verified through simulations and physical experiments. The general approach is based on selecting the closed-loop transfer function of the DLL, together with identifying the coefficients of the phase-detector and voltage-controlled delay line, and subsequently, solving for parameters of the loop filter of the DLL. Past DLL design approaches relied more on establishing a desired phase margin requirement than attempting to establish a desired input–output behavior. This limited the realization of DLLs to second order; largely a result of the complicated mathematics that arise. As the method proposed in this paper is based on selecting a desired closed-loop transfer function, the issues of stability or phase margin never come to the forefront. This paper will show how a DLL can be designed to achieve a fast-settling-zero-overshoot step response with large jitter-rejection capabilities. The method is simple and easy to execute. No optimization or iteration is necessary. The method is similar to the methods used to design active-RC filter circuits. A fully programmable experimental prototype involving a custom IC implemented in a 130-nm IBM CMOS process was constructed. DLLs with orders ranging from second to eighth will be investigated. [ABSTRACT FROM PUBLISHER]

High performance mixed signal (HPMS) platforms require stringent overall system and subsystem performance. The ability to design ultra-low power systems is used in a wide range of platforms including consumer, mobile, identification, healthcare products and microcontrollers. In this paper we present an overview of low power design techniques, challenges and opportunities faced in an industrial research environment. The paper presents strategies on the deployment of low power techniques that span from power-performance optimization scenarios accounting for active and standby operation modes to the development of multi-core architectures suitable for low voltage operation. [ABSTRACT FROM AUTHOR]

This paper presents a dynamic timing control technique to prevent timing errors in a pipeline under variations. Timing errors in a pipeline are prevented by borrowing time from the following stage and resolving the borrowed time by stretching the next clock cycle. This paper analyzes the operating principles of the proposed technique; presents the design of the required circuit components; and demonstrates its operation through fabrication and measurement of a prototype test-chip designed in an 180 nm CMOS process. The measurement results demonstrate that a system employing the dynamic timing control technique can operate in a wider frequency and voltage range. [ABSTRACT FROM AUTHOR]

Field-Coupled Nanocomputing technologies have great potential to surpass CMOS technology because of their lower power consumption and higher device concentration. To ease the burden of placement and routing (P&R) problems for FCN circuits, many delicate two-dimensional clocking schemes have been proposed, upon which algorithms can solve the P&R problems more strategically. In this paper, we propose a two-level optimization strategy by using a genetic algorithm (GA) combined with an enhanced A* algorithm. Some circuit design requirements, such as clock synchronization, layout area, etc., are cleverly designed in the fitness value function of the GA. Numerical results demonstrate the effectiveness of the hybrid algorithm. In particular, compared to current tools, such as fiction and Ropper, the proposed algorithm can achieve an optimal solution with a higher success rate and a sizeable applicable circuit scale. In addition, the concept of design rule checking (DRC) was proposed in FCN and integrated into the algorithm, making the P&R results mapping from gate-level to cell-level more smoothly. Besides, the number of cross wires is significantly reduced, and the distribution of IO ports can be more effectively controlled. [ABSTRACT FROM AUTHOR]

This paper presents a 7-bit digital to phase converter (DPC) for high speed clock and data recovery (CDR) applications which is capable of generating multi-phase clocks at 7-GHz frequency. Fabricated in a standard 65-nm CMOS technology, the design introduces a modified phase interpolator (PI) and a quadrature phase corrector (QPC) to reduce the effect of the circuit imperfections on the DPC’s resolution and linearity. Employing a 14-GHz quadrature reference clock, the DPC achieves DNL/INL of 0.7/6 LSB respectively while consuming 40.5 mW power from 1.05 V supply. [ABSTRACT FROM AUTHOR]

This paper presents a linear current-reuse sampling phase detector for a single-loop type-I phase-locked loop (PLL) to simultaneously achieve a wide loop bandwidth and low control voltage ripple, resulting in low RMS jitter and reference spur, while minimizing the chip area by avoiding an explicit loop filter. Fabricated in 28-nm CMOS, the PLL prototype measures an integrated jitter of 440 fsRMS, and a spur level of −63.9 dBc at 3.296 GHz. It draws 3.3 mW at a 0.9-V supply and scores a jitter-power figure-of-merit (FoM) of −241.9 dB. With a 103-MHz reference input, a bandwidth of ~20 MHz aids suppressing significantly the ring VCO’s phase noise (PN), leading to an in-band PN of −116 dBc/Hz at 1-MHz offset. The die size is 0.003 mm2. [ABSTRACT FROM AUTHOR]

In this paper it is proposed and explored the use of the Dickson charge pump (CP) to amplify time-variant signals. The study has been carried out through a theoretical analysis that provides an in-depth comprehension of the behavioral equations and the main design metrics commonly used to evaluate the performance of amplifiers. Starting from the analytical models, we show the conditions upon which the CP can be modeled with an equivalent small signal circuit and can amplify a signal. Then, assuming the CP working in the widest operative conditions, small-signal, large-signal and noise analysis are carried out. The results have been validated by extensive simulations and measurements on a proof of concept using a 130 nm CMOS technology. [ABSTRACT FROM AUTHOR]

The divider is one of the most complex hardware units in Stochastic Computing (SC); even though several new designs have been presented to reduce the computation latency of the conventional divider, all of them still require a considerable number of clock cycles. Moreover, they incur in low performance due to the employed arithmetic computational scheme. In this paper, a Delta Sigma Modulator (DSM) based stochastic divider is proposed. As an entirely digital circuit, the proposed divider offers the best computation latency and accuracy over all existing stochastic dividers found in the technical literature (with a typical reduction between 66.8% and 96.9% in the number of clock cycles and a reduction from $10^{\mathrm {-3.4}}$ to $10^{\mathrm {-3.9}}$ in the average mean square error for a 10-bit resolution). An SC-based Neural Network (NN) is considered as an initial case study to evaluate the advantages of the proposed design in an emerging application; results show that the proposed divider enables an SC-based NN to achieve a higher classification accuracy and hardware efficiency than existing designs. To show the flexibility of the proposed divider design, its application to Sobol-based sequences is also presented; also in this case, its superiority over other designs is confirmed. These features make the proposed design very attractive for hardware-constrained platforms; moreover, such a novel design approach that incorporates ideas from analog/mixed signal circuit design into a digital circuit design, can motivate other researchers to design efficient SC designs using similar schemes. [ABSTRACT FROM AUTHOR]

Computing systems working in harsh environment is prone to suffer from radiation-induced soft errors; for example, Single Event Upsets (SEUs) and Single Event Transients (SETs) are the major reliability issue for circuits fabricated with nanoscale technology nodes. In this paper, we proposed a low-cost SET and SEU error tolerant flip-flop (SETU-TOFF). Based on the traditional flip-flop, two high-level sensitive redundant latches are added to latch the input data at different times, and a voter is designed for the correct output. It removes the timing overhead of temporal redundancy from the critical path of the systems. Comparing with the existing designs presented in literatures, SETU-TOFF has comprehensive fault tolerant capability with lower overheads; moreover, it doesn’t increase significant latency of the flip-flops. We use the SETU-TOFF cells to protect a pipeline of an OpenRISC microprocessor. Fault injection simulations show that SETU-TOFF can achieve 100% protection for the pipeline with negligible performance loss; additionally, it can detect and correct errors in real time without extra system control logic and clocks for errors recovery. [ABSTRACT FROM AUTHOR]

The analysis of injection-locked clock multipliers (ILCMs) using bang-bang phase detectors (BBPDs) is challenging due to the nonlinear BBPD and the multi-rate injected oscillator. This paper presents an explicit analysis of digital ILCMs using BBPDs and proposed an intuitive approach to optimizing parameters with given noise sources. A time-domain analysis in the single-clock domain is presented to solve the closed-form expression of jitter in the ILCM. The proposed approach exhibits good consistency with simulations, for various design parameters and noise cases. With the predicted input-referred jitter, the equivalent BBPD gain is resolved to derive the frequency-domain noise transfer functions in concise forms. To achieve the desired performance with given specifications, recommended design procedures are summarized based on the proposed analysis and verified by simulations. [ABSTRACT FROM AUTHOR]

This paper presents an area-efficient current-mode-logic (CML)-based divider, with a tunable self-resonant frequency for locking range (LR) extension. Specifically, a negative- $g_{m}$ (NG) cell is inserted between the resonated shunt-peaking inductor and the load resistor to shift the divider’s sensitivity curve (SC), enabling concurrently a higher operating frequency and a wider LR. We also use the injection-locking concept, together with a graphical phasor diagram with the frequency-phase information, to systematically explain the LR-extension mechanism. Prototyped in a 65-nm CMOS, the divider occupies a tiny active area of 0.0018 mm2. The measured LR is 153% (4–30 GHz) while consuming 4.06–4.28 mW at 30 GHz under a single 1.2-V supply. The performance corresponds to two figure of merits: FOM $_{\mathbf {Pdc}}$ of 25.5 dB and FOM $_{P}$ of 71.5, both compare favorably with the state of the art. [ABSTRACT FROM AUTHOR]

In this paper, a fully synthesizable digital-to-analog converter (DAC) is proposed. Based on a digital standard cell approach, the proposed DAC allows very low design effort and enables digital-like shrinkage across CMOS generations, low area at down-scaled technologies, and operation down to near-threshold voltages. The proposed DAC can operate at supply voltages that are significantly lower and/or at clock frequencies that are significantly greater than the intended design point, at the expense of moderate resolution degradation. In a 12-bit 40nm testchip, graceful degradation of 0.3 bit/100 mV is achieved when ${{\mathrm {V}}}_{\mathrm {DD}}$ is over-scaled down to 0.8 V, and 1.4 bit/100 mV when further scaled down to 0.6 V. The proposed DAC enables dynamic power-resolution tradeoff with three times (two times) power saving for 1-bit resolution degradation at iso-sample rate (iso-resolution). A 12-bit DAC testchip designed with a fully automated standard cell flow in 40 nm consumes $55~\mu \text{W}$ at 27 kS/s ($9.1~\mu \text{W}$ at 13.5 kS/s) at a compact area of $500~\mu \text{m}^{\mathrm {2}}$ and low voltage of 0.55 V. [ABSTRACT FROM AUTHOR]

This paper presents a compact impulse-radio ultra-wide band non-coherent receiver architecture for high data rate wireless neural recordings from active high-density CMOS-probes. The system is capable of receiving, synchronizing, and demodulating a continuous on–off keying pulse stream at 1 Gb/s and 4 GHz center frequency using an active area of 0.34 mm2 and a single 31.25 MHz crystal reference. An asynchronous threshold energy detector, including a pulse enhancement baseband with an all-digital back-end, recovers incoming transmitter clock (CDR) and acquires packet synchronization based on a data-aided mechanism (DPR). Results shows that a prototype of the receiver integrated in a 130 nm CMOS process recovers synchronization in 30 ns. The system includes I/O output buffers and driver logic at 1.8 V supply operating at 1 GHz on a 50 $\Omega $ load and crystal oscillator. Overall, it consumes 115 pJ/pulse, while the receiver core only consumes 12 pJ/pulse. This paper presents the receiver architecture, and experimental results show a sensitivity of −38 dBm at 10−3 packet error ratio. [ABSTRACT FROM AUTHOR]

This paper presents a highly linear BiCMOS sample and hold amplifier (SHA) providing 2.8-GS/s intermediate frequency (IF) sampling for a 1-GHz input bandwidth spanning from 1.5 to 2.5 GHz. A single-transistor hold-mode feedthrough cancellation technique is implemented to remove distortion resulting from the nonlinear parasitic capacitance at the sampling node. The SHA is designed in a mainstream 130-nm BiCMOS technology using SiGe heterojunction bipolar transistors to buffer and sample the wideband input. The proposed SHA enables monolithic integration with a high-speed analog-to-digital converter core to realize a high-performance converter solution. This independent sampling front end occupies a core chip area of 0.6 mm2 and consumes an average power of 1.26 W. The SHA is a pseudo-differential open-loop design that includes two cascaded track-and-hold amplifiers, a high-speed clock driver, and externally adjustable current mirror biases. The high-speed clock drivers and buffers add 170 mW to the total power consumption. The measurements of the fabricated SHA show a 10-bit effective resolution across the 1-GHz IF bandwidth and < −61-dBc HD2 and HD3. [ABSTRACT FROM AUTHOR]

This paper presents an all-digital bandpass $\Delta\Sigma $ time-to-digital converter (BP) $\Delta \Sigma $ TDC) for IF data conversion. The proposed TDC is based on a second-order resonator implemented by a cascade of two time-mode lossless discrete integrators (LDI), and a digital-to-time converter (DTC) in a feedback loop. The DTC is based on a new topology of double-edge voltage-controlled delay unit. The proposed TDC achieves bandpass quantization noise shaping and it does not require any complex calibration circuit to compensate for timing errors. To realize the time-mode LDI-based resonator, time-latches with some digital gates are employed. Moreover, a direct feed-forward compensation is utilized in the TDC to attain high signal-to-noise and distortion ratio (SNDR) by reducing the internal time-mode swing, thus relaxing the speed and area requirements on digital circuits leading to low-voltage operation. The prototype BP $\Delta \Sigma $ TDC achieves a 39.5-dB peak SNDR over a 0.2 MHz signal bandwidth at 42.8 MS/s while consuming less than 5 mW in a 1.2 V IBM 130-nm CMOS process. The proposed TDC is highly digital and occupies a core area of only 0.048 mm2. [ABSTRACT FROM AUTHOR]

This paper identifies novel directions of standard-cell-based synthesizable memory design. A compact 18T-bitcell of OR-AND-Invert (OAI) and AND-OR-Invert (AOI) logic gates is presented with bit-selective write and multiplexed read accesses. It reduces the bitcell area by 11%–40% compared to the state-of-the-art clock-gating-based D-latch schemes while avoiding custom-cell design. The improved storage density comes from the tight integration on two levels–coupling the read multiplexing within each bitcell and taking advantage of structured datapath placement in bitcell arrays by using commercial CAD tools. As measured on a 40 nm SRAM of 90 kb, the OAI/AOI-gate-based synthesizable memory features 0.4 V minimum access voltage, 30 fJ minimum read energy per bit, and a leakage power of 1.4 pW per bit at 0.3 V data retention voltage. It is ideally suited for IoT-node design operating in sub- $V_{\mathrm {t}}$ for joint dynamic energy and leakage power reduction. Further, it enables fast turn-around times by IP reuse over technology nodes with minimal (re)design effort. [ABSTRACT FROM AUTHOR]

Due to its high resolution, small silicon area, and reasonable conversion rate, extended counting analog to digital conversion (EC-ADC) has become a competitive candidate for application in the readout circuits of high accuracy sensors. In this paper, an EC-ADC for large scale sensor arrays is proposed. At the system level, a double-sampling configuration for incremental \Sigma\Delta modulators is proposed. By applying this configuration, the clock frequency of EC-ADC can be almost halved for the same conversion accuracy and rate. At the circuit level, the contribution of class-AB operational transconductance amplifier (OTA) structure to the low power design is analyzed and a class-AB OTA applicable for EC-ADC is developed. The proposed architecture has been implemented using a commercial 0.18 \mum CMOS technology. Measured results show that a power consumption of less than 77 \muW can be achieved at the conversion rate of 51.2 Ksamples/s and 12.2-bit accuracy respectively. The converter core occupies 0.044 mm^2. [ABSTRACT FROM AUTHOR]

Incremental analog-to-digital-converters (IADCs) are variants of $\triangle \Sigma $ ADCs, which have been increasingly used for low-power sensory applications in recent years. Most IADC applications require high resolution and high energy efficiency. In this paper, we present a systematic analysis of IADCs. We derive analytical design equations for practical IADC designs. Process limitations are included in the model as well. The equations are verified with a 14-bit second-order IADC design in a 0.18- $\mu \text{m}$ process. With the design equations, the theoretical energy efficiency bound is derived for IADCs. The efficiency bound is compared with previously reported IADC designs. It is found that the derived bound matches existing designs well. [ABSTRACT FROM AUTHOR]

This paper presents experimental results on a dual-rail pre-charge logic family whose power consumption is insensitive to unbalanced load conditions. The proposed logic family is based on the time enclosed logic (TEL) encoding and can be viewed as an improvement of the delay based dual rail pre-charge logic (DDPL) logic style. The DDPL logic gates have been redesigned to avoid the early evaluation effect and to reduce area and power consumption. A library of TEL secure gates and flip-flops has been implemented in a 65 nm CMOS process. The developed library allows adopting a semi-custom design flow (automatic place and route) without any constraint on the routing of the complementary wires. A four bit lightweight crypto core has been implemented on a 65 nm CMOS testchip by using the developed TEL library and compared against a SABL implementation of the same crypto core on the same chip. Comparisons have been carried out by means of extensive transistor level simulations and measurements on the 65 nm testchip which allowed to evaluate a wide set of security metrics. Experimental results have shown a strong reduction of the information leakage with respect to the sense amplifier based logic logic style under mismatched load conditions with an improvement in the measurements to disclosure of more than three orders of magnitude. [ABSTRACT FROM AUTHOR]

Interconnect shielding is used in very large scale integration designs to prevent noise interference from the cross-coupling capacitance between adjacent signals. This paper takes advantage of the shields already present in the design and uses them to tune the propagation delay of the clock signals by space tapering, thus eliminating expensive and process variation sensitive dedicated delay buffers. The problem of obtaining the desired delay at a minimum shielding cost (silicon area) by tapering its spacing from the signal wires is solved. A clock-tree synthesis methodology that uses shields to obtain useful skews at the underlying flip-flops is proposed. The method was tested on an industrial 28-nm memory controller and ARM® processor designs, operated in 800-MHz and 1.6-GHz clock speed, respectively, and confirmed its viability for delivering the required useful skews to flip-flops. About 90% of the useful skew problems could be solved by shielding manipulations. [ABSTRACT FROM PUBLISHER]

A 400 Mb/s∼2.5 Gb/s referenceless clock and data recovery (CDR) IC is presented. This paper shows that the half-rate linear phase detector (PD) has not only phase detection capability but also single-sided frequency detection capability in itself. By using this intrinsic frequency detection capability of the half-rate linear PD, a CDR can be implemented in the single loop architecture without both an external reference clock and a separate frequency detector. For verification, a prototype CDR IC was fabricated in a 0.13 \mu\textm CMOS process. With 2.5 Gb/s, 2^31 - 1 pseudorandom binary sequence (PRBS), the measurement results show that the frequency acquisition time is 17 \mu\texts, the bit error rate (BER) is better than 10−12, the jitter of the recovered clock is 8.6 \textps\mathrm{rms} and the out-of-band jitter tolerance is 0.32 \textUI\mathrm{pp}. [ABSTRACT FROM PUBLISHER]

This paper reports a half-rate bang-bang clock and data recovery (BBCDR) circuit supporting the trimodal (NRZ/PAM-4/PAM-8) operation. The observation of their crossover- points distribution at the transitions introduces the single-loop phase tracking technique. In addition, low-power techniques at both the architecture and circuit levels are employed to greatly improve the overall energy efficiency and multiply data throughput by increasing the number of levels on the magnitude. Fabricated in 28-nm CMOS, our BBCDR prototype scores a 0.29/0.17/0.14 pJ/bit efficiency at 14.4/28.8/43.2 Gb/s under NRZ/PAM-4/PAM-8 modes, respectively. The jitter is < 0.53 ps (integrated from 100 Hz to 1 GHz) with approximately-equivalent constant loop bandwidth, and we achieve at least 1-UIpp jitter tolerance up to 10 MHz for all the three modes. [ABSTRACT FROM AUTHOR]

In this paper, we present a new fast Fourier transform (FFT) hardware architecture called constant multiplier (CM) FFT. Whereas rotators in previous architectures must rotate among several different angles, the CM FFT exploits the use of constant multipliers to calculate the rotations. The paper explores the 4-parallel and 8-parallel radix-2 CM FFT, which calculates the FFT entirely by using constant multipliers. Later, radices $2^{k}$ are presented, with emphasis in radix-24 and radix-25 as the best alternatives. Experimental results for a 1024-point radix-25 CM FFT show that the proposed approach reduces the number of block random-access memories (BRAM) and digital signal processing (DSP) slices with respect to previous approaches, while achieving the highest clock frequency for a 4-parallel FFT architecture on field-programmable gate arrays (FPGAs) reported so far. [ABSTRACT FROM AUTHOR]

This paper presents two high-efficiency charge pumps (CPs) by utilizing the gate voltage boosting technique (GVBT). Unlike traditional bulk-CMOS and all-NMOS CPs, an input bias voltage is independently applied to the gate terminal, and it improves the current driving capability without the need of large pumping capacitors or high-frequency clocks. Meanwhile, the GVBT decouples the state of transistors from the clocks connected to the pumping capacitor, and it can eliminate the reversion loss in both main and auxiliary circuits. Fabricated in a 0.18- $\mu \text{m}$ standard CMOS technology, the single-stage all-NMOS CP achieved a maximum output voltage of 6.589 V and a peak power efficiency of 80.08%. We also implemented the bulk-CMOS CP with GBVT for comparison, the single-stage all-NMOS CP achieved $\sim 1.24\times $ more output voltage than the bulk-CMOS CP under a load current of 1.5 mA. The voltage errors of the all-NMOS CP between the analytical and the measured results are less than 7%. [ABSTRACT FROM AUTHOR]

In the Mesochronous Pipeline (MP), the clock period is the maximal of differences between the maximum/minimum delays of all stages. This value is less than the maximum delay between the memory elements, so MP is operating faster than the conventional pipeline (CP). To take full advantages of MP, in this paper, Automated Mesochronous Pipeline Scheduler (AMPS) for high performance digital circuits, is proposed which provides all allowed partitioning options generated by register allocation procedures obtained with varying maximum delay differences of stages. This allows a designer to select from design space produced by AMPS based on the desired specification. Unlike the traditional MP, AMPS utilizes automated scripts to extract the timing characteristics of the synchronizers and gates. This enables a designer to explore trade-offs between latency, power, and frequency. To evaluate our toolset, an 8-bit Carry Increment Adder (CIA), a 4-bit Binary-Coded Decimal (BCD) adder, a 4-bit ALU, and a set of circuits from ISCAS85 and ISCAS89 benchmarks are considered. All circuit level simulations are performed in the 65nm CMOS standard technology node. AMPS improves the frequency for its best solutions about 127.94% (on average) in comparison to the conventional pipeline scheme. [ABSTRACT FROM AUTHOR]

A random sampling-and-averaging (RSA) technique based on stochastic Monte Carlo methods is described in this paper for enhancing the accuracy of single-photon arrival-time measurements down to sub-picosecond ranges in emerging quantum applications. The theoretical variances of both synchronous and asynchronous RSA techniques are presented in the mathematical formats and experimentally verified by the Monte Carlo simulations. Meanwhile, the methodology of converting the mathematical models into an almost all-digital low-power integrated-circuit is elaborated by a circuit-level example with the instruction of setting circuit parameters. Along with the superior measurement resolution, scalable dynamic ranges, high linearity, high noise immunity, and low power/area consumption, the primary limitation of the RSA techniques has also been addressed for the forthcoming conversion-rate enhancement techniques. [ABSTRACT FROM AUTHOR]

This paper presents a compact and low-power time-domain CMOS temperature sensor intended for Internet of Things. To eliminate the off-chip reference clock that is commonly needed for time-domain CMOS temperature sensors, a precise on-chip reference clock is designed to measure the temperature-dependent delay generated by an inverter chain with even stages. In the reference clock circuit, a relaxation oscillator showing discharging phases with negative temperature coefficient (TC) is designed, which are compensated by 2 identical inverter-chains with positive-TC delay, resulting in a reference clock with nearly temperature-independent pulse width and period. In addition, a $2^{{\text {nd}}}$ -order hybrid time-voltage delta-sigma ($\Delta \Sigma $) modulator with feedforward path is proposed to quantize the temperature-dependent delay of the main inverter chain, achieving 100-mK resolution only in about 25-ms conversion time. Fabricated in 0.18- $\mu \text{m}$ CMOS, measurement results show that the best (worst)-case temperature accuracy of the clock’s reference time is ±0.015% (±0.055%) and the temperature sensor achieves a maximum inaccuracy of +0.66/−0.73 °C from −20 °C to −80 °C. The prototype occupies 0.45-mm2 chip area and consumes 1.99- $\mu \text{W}$ from a 1.8-V supply at room temperature. [ABSTRACT FROM AUTHOR]

This paper presents a switched capacitor network (SCN)-based bandgap voltage reference (BGR) circuit designed and implemented in a 65nm standard CMOS process with a wide temperature range, high precision, low supply voltage and low power consumption for IoT device application. The proposed BGR employs a 2x charge pump with ripple optimization design to supply the ${V} _{\mathbf {EB}}$ generator, which can relax ${V} _{\mathbf {DD}}$ from 0.9V to 0.5V.A proportional to absolute temperature (PTAT) current source is proposed to bias the PNP BJT in order to reduce the nonlinearity of ${V} _{\mathbf {EB}}$. Moreover, a voltage divider SCN with low leakage consideration to form the complementary to absolute temperature (CTAT) voltage is designed to reduce the nonlinearity of its coefficient, while a series-parallel SCN with adjusted clock swing to form the PTAT voltage is designed to improve the line regulation of the BGR. The measurement result shows that the proposed BGR has a temperature coefficient (TC) of 42 ppm/°C at 0.5V supply within −40 °C to 120 °C. The line regulation is 3.2mV/V or 0.64%/V from 0.5V to 1V. Based on 6-chip test result, it shows a $3\sigma / \mu $ variation of 3.08% before trimming, while 0.36% after trimming. [ABSTRACT FROM AUTHOR]